中国大陆科学钻探孔区的数字三分量反射地震调查

本文将简要介绍在大陆科学钻探孔区进行数字三分量地震勘探试验数据采集处理技术,以及取得的初步成果. 鉴于结晶岩地区波场的复杂性,在剖面调查之前要先进行波场特征调查,才能确定三分量地震调查观测系统采集参数.数据处理中与水平分量处理有关的三个困难环节包括静校正、速度分析与动校叠加,必须有所创新.在大陆科学钻探工程中,三分量数字地震调查之所以放在终孔后才进行,主要是因为三分量地震解释要以钻孔资料和VSP成果为基础.如果没有岩芯物性测定资料或VSP纵横波速度计算曲线,横波速度剖面模式就难以建立,水平分量数据处理和解释就难以进行.与单分量地震调查相比,水平分量采集处理提供了转换波信息,可反映独特的很有意义的地质信息.在三分量数字地震调查X分量深度叠加剖面左半边深度2600～3400 m区段出现密集的水平反射层,与Z分量反射剖面和变质岩片倾向不一致.对比主孔气体异常曲线可知,这些水平反射是地层中流体含量升高的反映.     

应用三分量浅层地震反射方法探测隐伏活动断裂

多波多分量地震勘探方法在油气田勘探开发中日益受到重视,但在工程和活动断裂探测中过去还没有开展多波多分量地震勘探的先例.本文简要介绍了在北京黄庄—高丽营断裂上开展的三分量浅层地震反射试验数据采集和资料处理方法,以及取得的初步结果.试验结果表明,采用纵波震源或横波震源激发、三分量接收的浅层地震勘探方法,可获得较高信噪比的浅层地震纵波、横波和转换波剖面,特别是水平分量采集的横波和转换波可提供很有意义的地下结构和构造信息.综合利用纵波、横波和转换波剖面特征进行的地质分层和断层解释结果取得了与跨断层的钻孔联合地质剖面结果较好的一致性.     

渤海浅海多波地震勘探

渤海A油田由于构造主体大面积(约20km2)浅层气形成的“气云”带,常规纵波反射频率及能量都受到严重损失,致使深层目的层地震成像不能准确反映地下地质构造特征。转换波(ps)含有有效入射P波信息,从中能获得转换S波。由于S波基本不受地层屏蔽的影响,从而能够获得深层较好的地震成像。为此在该构造上实施了浅海四分量地震采集。通过现场地质勘测,以及浅层钻井分析及多波地震试验,确定了海上采集流程。经过多次试验,确定了合理的转换波处理流程和关键参数,从而得到了较好的二维转换波剖面。通过正确识别波形特征,利用全波列测井,生成合成转换波地震记录,进行层位标定,指导构造解释及进行油田整体储量评价。     

大陆架科学钻探CSDP-2井的垂直地震剖面测量

南黄海海相地层的地震波场特征和层位标定一直是困扰地震勘探的重要问题.为了近距离、高精度和高分辨率地观测井周围构造特征和岩石性质引起的波场变化,为地震资料的采集、处理与解释提供地震波衰减规律、速度与层位标定等信息,对大陆架科学钻探CSDP-2井实施了近零偏移距垂直地震剖面（VSP）观测.针对海相地层顶部强反射界面地震波穿透难的问题,采用了大容量气枪震源并设计了气枪阵列组合方式,提高了激发地震波的能量,获得了强反射界面之下清晰的PP、PS下行波和上行波信号.采用了三分量偏振合成、组合滤波和波场分离等处理方法,对VSP观测数据进行处理,获得了海相三叠系—志留系的精细的纵波、横波速度结构和地层吸收因子等物性数据,建立了钻井地层、测井、VSP上行波和多道地震剖面对应关系,实现了不同尺度的地质和地球物理属性资料的有效衔接,标定了钻井地质剖面上各深度地质体的地震反射特性,厘定了过井地震剖面上反射同相轴的地质属性.此次观测取得的纵波、横波速度信息,成为建立南黄海海相地层速度模型主要的资料来源,也是地震资料的岩性反演处理不可缺少的信息.     

中国大陆科学钻探孔区的垂直地震剖面调查

苏鲁超高压变质带的研究对了解发生在地幔深处的大陆动力学作用具有重要意义.近年来在此带中进行了大陆科学钻探和以深反射地震为主导的详细的综合地球物理调查,为研究超高压变质带地壳上地幔组构提供了难得的基础资料.根据大陆科学钻探工程的安排,在钻探取心,测井和地面三维地震观测的同时,还在5000 m的钻孔中用三分量数字检波器,对地表激发传播到井中的地震波场作垂直地震剖面（VSP）观测,目的是将传感器放在钻孔内,近距离、高精度和高分辨率地观测井周围由于超高压变质带的构造特征和岩石岩性特征引起的波场变化.通过零偏移距和非零偏移距VSP调查,我们首次在超高压变质带取得了深度达5000 m的精细的横波速度和泊松比等地球物理属性数据,作出了钻井岩心柱、测井、VSP纵波速度、横波速度和纵横波速度比、VSP上行波和地面地震资料的桥式综合对比图,使不同尺度的地质和地球物理调查资料互相连接在一起. 零偏和非零偏VSP观测可以标定主孔地质剖面各深度地质体的地震反射特性、井旁地震剖面上各个同相轴的地质属性,并对井旁局部地质构造作精细成像.由此观测取得的横波速度资料,成为建立孔区横波速度模型主要的资料来源,这种模型也是地面多波观测数据处理不可缺少的.因此,建议在进行大陆科学钻探时尽可能安排VSP地震调查.     

VSP正反演综述

垂直地震剖面法是一种发展很迅速的地球物理方法,由于垂直地震剖面法是在介质内部点上直接观测,因而能够避开或减弱剖面上部低速带的干扰及外界噪声干扰,可以更直接、更有效地研究波的运动学和动力学特征,解决其地质问题,因此在地球物理勘探领域中最为活跃.本文从垂直地震剖面正反演的角度,并结合国内外实际的例子来介绍垂直地震剖面,同时讨论了垂直地震剖面未来发展的方向.     

基于随机介质模型的统计分析在深反射地震中的应用

深反射地震勘探是揭示地球深部构造的一种地球物理探测方法.由于不同于沉积地层的反射特征,深反射地震资料的解释需要不同于浅层水平层状介质的解释方法.基于随机介质模型的统计分析为深反射地震解释提供了新的途径.本文首先介绍了地球深部结构中非均质性的统计特性研究成果,阐述了随机介质模型的基本概念及二维随机介质的建立方法,讨论了随机介质模型参数的含义.通过正演模拟的方法分析了随机介质的地震响应特点,对比实际深反射地震资料可对地壳中反射透明区、上下地壳界面、莫霍面反射以及非均质入侵体的地震响应提出合理解释.然后总结了从反射地震数据估算随机介质参数的方法及存在的问题,结合实例论述了随机介质参数分析在深反射地震解释中的作用.最后探讨了该方法的优缺点及应用前景.     

20世纪90年代我国对地壳上地幔结构的人工地震探测研究

介绍了20世纪90年代我国人工地震探测在研究大震区和潜在震源区深部细结构，发震构造的深部特征、介质物性，地壳和上地幔结构与地球动力学过程，火山深部结构，油气生成的深部构造环境等方面取得的成果，以及人工地震资料解释中P波和S波的联合应用，浅层地震反射法在地壳浅层细结构、深浅构造关系研究方面取得的进展。     

深地震反射剖面探测技术发展现状

由石油地震勘探发展而来的深地震反射剖面探测技术,采用炸药震源、长排列、多次覆盖等方式接收来自地壳或上地幔的反射信号,经过去噪、校正、叠加、偏移等处理过程,可获得地壳尺度范围内的精细时间剖面,是研究深部构造特征、探讨构造演化过程的重要手段,发挥着其他地球物理方法不可替代的作用.深地震反射探测技术自上世纪由美国率先提出以来,经过几十年的发展历程,依托一系列的深部探测计划,获得了多条重要的深反射剖面,解决了包括造山带演化过程、盆地构造模式、矿集区深部构造特征等众多地质问题,得到了众多地质学家和地球物理学家的认可.目前深反射探测技术已经发展成为一种系统的、方法技术成熟的、结果可靠的深部结构探测方法,在关键地区也常常作为研究深部精细结构的先行军.我们通过总结近些年深地震反射剖面探测的实例,从采集技术、数据处理、综合解释等方面概述了深地震反射剖面探测技术取得的一系列新进展及应用,包括高精度可控震源采集技术、线条图处理技术、全波形反演技术、联合解释等.这些新技术的应用不仅有效提高了深地震反射剖面成像质量,也解决了深地震反射探测中面临的地形构造复杂、施工不便等问题,使得深地震反射探测在解决特定地区地质...     

兰州盆地活断层的高分辨率浅层地震勘探技术

针对城市活断层浅层地震探测的一些技术问题,在兰州盆地的金城关断层和刘家堡断层沿线开展活断层浅层(50 m以内)地震勘探技术研究.主要采用纵波和横波多次覆盖共CMP点地震反射方法,获得了目标场地地震图像资料,尤其横波地震剖面更加清晰地反映出超浅层构造空间特征.以红艺村测线(HYC)和师范学校西测线(SFXX)为例,分析总结了数据采集、资料处理、剖面解释三方面浅层活断层地震探测的技术要点.结果可以为兰州市及类似复杂构造地区活断层地震调查提供技术参考.     

Application research of seismic method in assessment of active fault

ＡｐｐｌｉｃａｔｉｏｎｒｅｓｅａｒｃｈｏｆｓｅｉｓｍｉｃｍｅｔｈｏｄｉｎａｓｅｓｍｅｎｔｏｆａｃｔｉｖｅｆａｕｌｔＭＩＮＧＣＡＩＸＵ（徐明才）ＪＩＮＧＨＵＡＧＡＯ（高景华）ＭＩＮＧＴＡＯＣＨＡＩ（柴铭涛）ＧＵＡＮＧＫＥＷＡＮＧ（王广科）ＪＩ...     

A comparison of methods for the analysis of compressional,shear, and surface wave seismic data,and determination of the shear modulus

The seismic refraction method is commonly used to determine the lithology and stratigraphic geometry of geological sites. Beyond this application there is also the potential to extract additional velocity-related information such as mechanical properties of soils and rocks. However, this requires a reliable model of the subsurface velocity variations. Refraction data, P- and SH-wave first arrivals, and surface waves were analyzed using three different techniques: delay-time in combination with ray-tracing, tomography and multichannel analysis of surface waves (MASW). Results from the first two techniques were compared, which showed that sharp high-contrasting layering is best imaged by the traditional method, delay-time followed by ray-tracing. The tomographic method was unable to detect the water table in the P-wave survey but resolved near-surface gradational velocity changes. On the other hand, in the SH-wave survey the traditional method was not useful because of gradually increasing velocities, which were better suited to the tomographic method. Furthermore, to produce spatially detailed velocity-variation models the tomographic or the MASW methods are applicable. The MASW model showed somewhat lower velocities compared to the SH-refraction tomographic model and, in contrast, showed inverted velocity gradients. This study also presents a comparison between the shear moduli measured in situ, i.e. calculated from shear wave velocities, and determined using empirical relationships. The empirical relationship for sand gives higher values for shear moduli than those measured in situ.     

高分辨折射和浅层反射地震方法在活断层探测中的联合应用

浅层反射地震方法是城市活断层探测常用的技术,但在基岩埋深比较浅的地区,往往只能识别出基岩顶面的反射波,而仅根据反射地震剖面上单个同相轴的变化很难准确判定断层是否存在.浅层地层的错断往往会引起速度的横向变化,利用高分辨折射地震方法采集的数据,应用层析成像方法获得的速度剖面,能够反映地下速度结构的变化,可以从另一方面揭示浅层断层存在的可能性.在四川某地,将这两种方法同时应用于活断层浅层地震勘探中.结果表明,两种方法联合应用可在一定程度上弥补浅层反射地震勘探方法在基岩埋深较浅地区的不足.     

Remarks on Urban Active Fault Exploration and Assessment of Fault Activity

to the practice of urban active fault exploration and associated fault activity assessment conducted in recent years, this paper summarizes the problems encountered in geological, geomorphological, geochemical and geophysical surveys, and proposes the following means and suggestions to solve these problems. To determine the most recent faults or fault zones, emphasis should be placed on identifying the youngest active faults and offset geomorphology. To understand the history of faulting and to discover the latest offset event, it is suggested that geophysical prospecting, drilling and trenching be conducted on one pro/de. Because of significant uncertainties in late Quaternary dating, we advise systematic sampling and the use of multiple dating methods. Shallow seismic reflection has been proven to be the most useful method in urban active fault exploration. However, there is a pressing need to increase the quality of data acquisition and processing to obtain high resolution images so as to enhance our ability to identify active faults. The combination of seismic P-wave reflection and S-wave reflection methods is proved to be a powerful means to investigate the tectonic environments of the deep crust.     

A seismic multi-approach method for characterizing contaminated sites

A geophysical campaign to characterize the subsurface of a contaminated site down to a depth of several tens of meters was carried out under the HYGEIA-CEE project. On this site, seismic techniques were combined to image the geological structures; i.e. seismic reflection, P-wave tomography and spectral analysis of surface waves. Because these techniques consider different wave components in the processing, they can be expected to provide complementary information concerning the site lithology. The special feature of this experiment is the fact that the same seismic acquisition device, consisting of a mobile central unit, a drop-weight seismic source, and a sensor line of gimbal mounted geophones, was used for each of the techniques. Two perpendicular seismic lines were set up in the field for testing two geophone spacings. Three processing procedures, one each for the seismic reflection, P-wave tomography and spectral analysis of surface waves, were developed for producing seismic images from the P-wave reflectivity, the first P-wave arrivals and the dispersion of Rayleigh waves, respectively. The images show good complementarity in terms of investigation depth. The results are also in good agreement with available borehole data: the sandy layers seem to be related to low velocities, since the high velocities are better explained by the presence of clayey and gravelly intervals. The contribution and the limits of this seismic multi-approach method is discussed.     

Some SH-wave seismic reflections from depths of less than three metres

Shallow SH-wave reflections are far from routine, although their study can provide insights into important properties of near-surface materials that cannot be inferred from P-wave data alone. Difficulties in separating SH-wave reflections from Love waves are generally considered the major obstacle to progress in shallow SH-wave seismic reflection. This may be the case in surveys undertaken at great depths, but it is not necessarily true for reflection data gathered at shallow and ultra-shallow depths. This paper shows that when SH-wave data possess wavelengths greater than the thickness of the superficial layer, Love waves are not greatly dispersed. In this case, misinterpretation between parts of reflection hyperbolae and waveguide arrivals is sufficiently limited. In a one-layer model earth, which well approximates typical situations of the near-surface underground, the most energetic modes (the lowermost modes) of the dispersed surface waves have a dominant frequency band that falls below the wavelet spectrum of the shallow reflections; therefore, they can be filtered out in the frequency domain. Higher modes, although their spectral content overlaps that of the reflections, exhibit small amplitudes on seismograms and leave strong reflections unaffected.We present field examples from three different sites where we were able to obtain ultra-shallow reflections (< 3 m) in unconsolidated sediments. The high level of resolution (vertical resolution up to 15 cm) suggests that SH-wave reflection imaging has the potential to complement other high-resolution techniques, such as P-wave reflection and ground-penetrating radar (GPR) imaging, allowing a better and more complete characterization of the near-surface environments.     

西淋岗第四纪错断面特征及其成因

西淋岗第四纪错断面位于佛山市顺德区陈村镇,有研究者认为这是晚第四纪活动断裂。为了进一步探明该错断面形成的机理,进行了大比例尺地质地貌填图、探槽开挖、浅层地震探测和第四纪地层年代测定等工作。结果表明,该点及其周边地貌上没有最新构造活动的迹象,但符合重力活动的特征。第四纪地层的错断和基岩中的断裂不能配套,不是统一构造应力场的产物。两侧物探反射特征表明,基岩断裂并未错断第四纪地层。根据基础地质条件、工程地质类比和高陡稳定性计算结果判断,该错断面的产生具备重力活动的条件,是重力失衡的结果,而并非由构造作用形成。     

第四纪沉积区断层及其上断点探测的地震方法技术——以银川隐伏活动断层为例

地震勘探方法是隐伏断层探测的一种有效的地球物理探测手段,而地震勘探的探测参数是影响探测效果和断层定位精度的主要因素.本文以银川市活断层探测的浅层地震勘探资料为例,并结合石油地震勘探剖面结果和钻孔地质资料,阐述了在第四纪覆盖层较厚的地区,由深至浅追踪目标断层形态和确定断层上断点空间位置的方法技术.结果表明,采用高分辨率地震勘探和钻孔地质剖面相结合的探测方法是确定隐伏断层位置、判定断层活动性的有效方法.     

SHALLOW STRUCTURE AND ACTIVITY CHARACTERISTICS OF THE ZHUYANGGUAN-XIAGUAN FAULT IN THE NANYANG BASIN

The Zhuyangguan-Xiaguan fault is a major fault in the Nanyang Basin. Together with the the Shangxian-Danfeng fault in the south and the Tieluzi fault in the north, it serves as the north boundary of the East Qingling Mountains, as well as the dividing line between North China and South China blocks. This work studied the spatial extension, activity and shallow structure of Zhuyangguan-Xiaguan Fault by combination of shallow seismic exploration of three profiles across the fault and a composite drilling cross-section data. The anti-interference and high resolution shallow seismic reflection exploration method based on Vibseis techniques was used in the seismic survey. The results show the existence of the main fault and its southern branch. It can be determined that the the Zhuyangguan-Xiaguan fault is a NWW-trending normal fracture. The composite drilling cross-section reveals that the buried depth of the fault's up-breakpoint is about 17.6 to 20.5 meters and the latest active time is the late Middle Pleistocene. As one of the major buried faults in the Nanyang Basin, the Zhuyangguan-Xiaguan fault has restricted the development of Nanyang City for a long time due to its unclear location and activity characteristics. The results of this study can provide geological and geophysical evidence for seismic risk assessment and site selection for the major lifeline projects in Nanyang City.