Characterization of High-K Pathways by Borehole Flowmeter and Tracer Tests

This paper reviews different borehole flowmeter analysis methods and evaluates their applicability to a test site composed of fluvial deposits. Results from tracer and aquifer tests indicate that the aquifer is highly heterogeneous and that low-K skin effects exist at the wells. Borehole flowmeter tests were performed at 37 wells. An appropriate method for calculating borehole flowmeter K values was developed based on results from multiwell pumping tests, single-well pumping tests, and slug tests. The flowmeter data produced 881 K values. The trends and the magnitude of the K values are consistent with results from geologic investigations, recirculating tracer tests, and large-scale multiwell pumping tests. The field tests illustrate that high-K deposits can significantly affect ground-water flows in some heterogeneous fluvial aquifers.     

Measurement of LNAPL Flux Using Single‐Well Intermittent Mixing Tracer Dilution Tests

The stability of subsurface Light Nonaqueous Phase Liquids (LNAPLs) is a key factor driving expectations for remedial measures at LNAPL sites. The conventional approach to resolving LNAPL stability has been to apply Darcy's Equation. This paper explores an alternative approach wherein single‐well tracer dilution tests with intermittent mixing are used to resolve LNAPL stability. As a first step, an implicit solution for single‐well intermittent mixing tracer dilution tests is derived. This includes key assumptions and limits on the allowable time between intermittent mixing events. Second, single‐well tracer dilution tests with intermittent mixing are conducted under conditions of known LNAPL flux. This includes a laboratory sand tank study and two field tests at active LNAPL recovery wells. Results from the sand tank studies indicate that LNAPL fluxes in wells can be transformed into formation fluxes using corrections for (1) LNAPL thicknesses in the well and formation and (2) convergence of flow to the well. Using the apparent convergence factor from the sand tank experiment, the average error between the known and measured LNAPL fluxes is 4%. Results from the field studies show nearly identical known and measured LNAPL fluxes at one well. At the second well the measured fluxes appear to exceed the known value by a factor of two. Agreement between the known and measured LNAPL fluxes, within a factor of two, indicates that single‐well tracer dilution tests with intermittent mixing can be a viable means of resolving LNAPL stability.     

Evaluating the Use of In‐Well Heat Tracer Tests to Measure Borehole Flow Rates

Recent research has demonstrated the use of in‐well heat tracer tests monitored by a fiber optic distributed temperature sensing (DTS) system to characterize borehole flow conditions in open bedrock boreholes. However, the accuracy of borehole flow rates determined from in‐well heat tracer tests has not been evaluated. The purpose of the research presented here is to determine whether borehole flow rates obtained using DTS‐monitored in‐well heat tracer tests are reasonable, and to evaluate the range of flow rates measureable with this method. To accomplish this, borehole flow rates measured using in‐well heat tracer tests are compared to borehole flow rates measured in the same boreholes using an impeller or heat pulse flowmeter. A comparison of flow rates measured using in‐well heat tracer tests to flow rates measured with an impeller flowmeter under the same conditions showed good agreement. A comparison of in‐well heat tracer test flow rate measurements to previously‐collected heat pulse flowmeter measurements indicates that the heat tracer test results produced borehole flow rates and flow profiles similar to those measured with the heat pulse flowmeter. The results of this study indicate that borehole flow rates determined from DTS‐monitored in‐well heat tracer tests are reasonable estimates of actual borehole flow rates. In addition, the range of borehole flow rates measurable by in‐well heat tracer tests spans from less than 10^?1 m/min to approximately 10¹ m/min, overlapping the ranges typically measurable with an impeller flowmeter or a heat pulse flowmeter, making in‐well heat tracer testing a versatile borehole flow logging tool.     

A New-Generation Borehole Electrodynamic Seismometer for Seismological Research

This paper reports the development of a new-generation short-period borehole electrodynamic seismometer designed for research, with special emphasis on seismology and volcanology (Sobisevich et al., 2008) and for important applications (Bashilov, 2001), e.g., developing special monitoring and security systems, as well as the search for and monitoring of hydrocarbon exploration.     

ogs5py: A Python-API for the OpenGeoSys 5 Scientific Modeling Package

High-performance numerical codes are an indispensable tool for hydrogeologists when modeling subsurface flow and transport systems. But as they are written in compiled languages, like C/C++ or Fortran, established software packages are rarely user-friendly, limiting a wider adoption of such tools. OpenGeoSys (OGS), an open-source, finite-element solver for thermo-hydro-mechanical–chemical processes in porous and fractured media, is no exception. Graphical user interfaces may increase usability, but do so at a dramatic reduction of flexibility and are difficult or impossible to integrate into a larger workflow. Python offers an optimal trade-off between these goals by providing a highly flexible, yet comparatively user-friendly environment for software applications. Hence, we introduce ogs5py , a Python-API for the OpenGeoSys 5 scientific modeling package. It provides a fully Python-based representation of an OGS project, a large array of convenience functions for users to interact with OGS and connects OGS to the scientific and computational environment of Python.     

Reversed Flow Test: A Borehole Logging Method for Estimating Pore Water Quality and Inflow Rates Along an Uncased Borehole Profile

There is often a need to estimate the variation in water quality and flow rate with depth in an aquifer given access only to an uncased borehole. In such situations, borehole logging techniques can be applied. This paper describes the Reversed Flow Test (RFT), a rarely used borehole logging method. The RFT is intended to provide information on pore water quality and inflow rates along the length of an uncased borehole profile. They are carried out by logging the conductivity of the borehole fluid under two pumping phases. During the first pumping phase the pump intake is located at the top of the borehole, and during the second the intake is located at the base. Provided the pumping rates are low and the system does not have marked lateral heterogeneity, stable conductivity profiles are often achieved within a relatively short time period. The data are interpreted to give estimates of electrical conductivity and inflow at each point in the profile. The test has been successfully carried out on a range of British aquifers, and four case histories are summarized here. In each case, the test was easily accomplished by two people in less than a day.     

Interpretation of Pumping Tests in Heterogeneous Aquifers with Constant Head Boundary

This paper investigates the impact of heterogeneity of the transmissivity field on the interpretation of steady-state pumping test data from aquifer systems delimited by constant head boundaries such as aquifers adjacent to lakes or rivers. Spatially variable transmissivity fields are randomly generated and used to simulate the drawdown due to a pumping well located at different distances from a constant head boundary. The steady-state drawdown simulated at different observation wells are then interpreted using the Hantush method (Hantush 1959). The numerical simulations show that, in contrast to the case of infinite aquifer domains, the interpreted transmissivity varies depending on well locations and the separation distance between pumping well and boundary relative to the correlation length. The ensemble-averaged estimated transmissivity varies between the geometric mean and the arithmetic mean, and can even exceed the arithmetic mean in a narrow domain adjacent to the boundary. It approaches the geometric mean of the underlying transmissivity field only if the distance between the pumping well is more than 20 times the characteristic length of the transmissivity field.     

Use of Single‐Well Tracer Dilution Tests to Evaluate LNAPL Flux at Seven Field Sites

Petroleum liquids, referred to as light non‐aqueous phase liquids (LNAPLs), are commonly found beneath petroleum facilities. Concerns with LNAPLs include migration into clean soils, migration beyond property boundaries, and discharges to surface water. Single‐well tracer dilution techniques were used to measure LNAPL fluxes through 50 wells at 7 field sites. A hydrophobic tracer was mixed into LNAPL in a well. Intensities of fluorescence associated with the tracer were measured over time using a spectrometer and a fiber optic cable. LNAPL fluxes were estimated using observed changes in the tracer concentrations over time. Measured LNAPL fluxes range from 0.006 to 2.6 m/year with a mean and median of 0.15 and 0.064 m/year, respectively. Measured LNAPL fluxes are two to four orders of magnitude smaller than a common groundwater flux of 30 m/year. Relationships between LNAPL fluxes and possible governing parameters were evaluated. Observed LNAPL fluxes are largely independent of LNAPL thickness in wells. Natural losses of LNAPL through dissolution, evaporation, and subsequent biodegradation, were estimated using a simple mass balance, measured LNAPL fluxes in wells, and an assumed stable LNAPL extent. The mean and median of the calculated loss rates were found to be 24.0 and 5.0 m³/ha/year, respectively. Mean and median losses are similar to values reported by others. Coupling observed LNAPL fluxes to observed rates of natural LNAPL depletion suggests that natural losses of LNAPL may be an important parameter controlling the overall extent of LNAPL bodies.     

A COMSOL-PHREEQC Coupled Python Framework for Reactive Transport Modeling in Soil and Groundwater

The CPqPy framework coupling COMSOL and PHREEQC based on Python was developed. This framework can achieve the simulation of diversified situations including multi-physics coupling and geochemical reactions of soil and groundwater. The multi-physics coupling models are calculated in COMSOL, whereas PHREEQC was applied to calculate the geochemical models through the Phreeqpy library in Python. Feasibility and accuracy of CPqPy were verified and applied to two cases, including a solute transport model considering equilibrium reaction and ion exchange as well as a reactive transport model of a variable saturation soil considering kinetic reaction. The results show a high degree of credibility of CPqPy. The framework has the advantages of strong portability, and it can be further used in conjunction with multiple Python calculation libraries, which greatly extends the application of the reactive transport model.     

A Review of the Calculation Formula for the Four-component Borehole Strainmeter and Application to Earthquake Cases

Based on the principle formula for the four-component strainmeters, we can directly obtain the specific plane strain, shear strain and azimuthal angle of the principal strain, and the maximum and minimum principal strains calculated afterwards are the indirect result. The problems of practicality of the sensitivity coefficients A and B of plane strain and shear strain are then discussed. Based on this idea, we analyzed the observation data of several four-component borehole strainmeters near the epicenter of the Yiliang M_S5.7 earthquake in 2012 and the Ludian M_S6.5 earthquake in 2014 in the Zhaotong area, Yunnan Province. The results show that the analysis based on the perspective of plane strain and shear strain has an obviously better effect than that based on the component readings, and can directly peel off the respective abnormality of the plane strain and shear strain. In addition, the correlation coefficient curves between measured data of two plane strains show significant anomalies which often occur several days before and during the earthquake.     

A Generic Closed-Loop Contaminant Treatment System Package for MODFLOW 6

We present a contaminant treatment system (CTS) package for MODFLOW 6 that facilitates the simulation of pump-and-treat systems for groundwater remediation. Using the “nonintrusive” MODFLOW 6 application programming interface (API) capability, the CTS package can balance flows between extraction and injection wells within the outer flow solution loop and applies blended concentration/mass treatment efficiency within the outer transport solution loop. The former can be important when the requested extraction rate cannot be satisfied by the current simulated groundwater system conditions, while the latter can be important for simulating incomplete/imperfect treatment schemes. Furthermore, the CTS package allows users to temporally vary all aspects of a simulated CTS system, including the configuration and location of injection and extraction wells, and the CTS efficiency. This flexibility combined with the API-based implementation provide a generic and general CTS package that can be applied across the wide range of MODFLOW 6 simulation options and that evolves in step with MODFLOW 6 code modifications and advancements without needing to update the CTS package itself.