Complex proximal deposition during the Plinian eruptions of 1912 at Novarupta,Alaska

Proximal (<3 km) deposits from episodes II and III of the 60-h-long Novarupta 1912 eruption exhibit a very complex stratigraphy, the result of at least four transport regimes and diverse depositional mechanisms. They contrast with the relatively simple stratigraphy (and inferred emplacement mechanisms) for the previously documented, better known, medial–distal fall deposits and the Valley of Ten Thousand Smokes ignimbrite. The proximal products include alternations and mixtures of both locally and regionally dispersed fall ejecta, and numerous thin complex deposits of pyroclastic density currents (PDCs) with no regional analogs. The locally dispersed component of the fall deposits forms sector-confined wedges of material whose thicknesses halve radially from and concentrically about the vent over distances of 100–300 m (cf. several kilometers for the medial–distal fall deposits). This locally dispersed fall material (and many of the associated PDC deposits) is rich in andesitic and banded pumices and richer in shallow-derived wall-rock lithics in comparison with the coeval medial fall units of almost entirely dacitic composition. There are no marked contrasts in grain size in the near-vent deposits, however, between locally and widely dispersed beds, and all samples of the proximal fall deposits plot as a simple continuation of grain size trends for medial–distal samples. Associated PDC deposits form a spectrum of facies from fines-poor, avalanched beds through thin-bedded, landscape-mantling beds to channelized lobes of pumice-block-rich ignimbrite. The origins of the Novarupta near-vent deposits are considered within a spectrum of four transport regimes: (1) sustained buoyant plume, (2) fountaining with co-current flow, (3) fountaining with counter-current flow, and (4) direct lateral ejection. The Novarupta deposits suggest a model where buoyant, stable, regime-1 plumes characterized most of episodes II and III, but were accompanied by transient and variable partitioning of clasts into the other three regimes. Only one short period of vent blockage and cessation of the Plinian plume occurred, separating episodes II and III, which was followed by a single PDC interpreted as an overpressured "blast" involving direct lateral ejection. In contrast, regimes 2 and 3 were reflected by spasmodic sedimentation from the margins of the jet and perhaps lower plume, which were being strongly affected by short-lived instabilities. These instabilities in turn are inferred to be associated with heterogeneities in the mixture of gas and pyroclasts emerging from the vent. Of the parameters that control explosive eruptive behavior, only such sudden and asymmetrical changes in the particle concentration could operate on time scales sufficiently short to explain the rapid changes in the proximal 1912 products.Editorial responsibility: R. Cioni     

Role of carbon dioxide in the dynamics of magma ascent in explosive eruptions

 The role of carbon dioxide in the dynamics of magma ascent in explosive eruptions is investigated by means of numerical modeling. The model is steady, one-dimensional, and isothermal; it calculates the separated flow of gas and a homogeneous mixture of liquid magma and crystals. The magma properties are calculated on the basis of magma composition and crystal content and are allowed to change along the conduit due to pressure decrease and gas exsolution. The effect of the presence of a two-component (water + carbon dioxide) exsolving gas phase is investigated by performing a parametric study on the CO₂/(H₂O+CO₂) ratio, which is allowed to vary from 0 to 0.5 at either constant total volatile or constant water content. The relatively insoluble carbon dioxide component plays an important role in the location of the volatile-saturation and magma-fragmentation levels and in the distribution of the flow variables in the volcanic conduit. In detail, the results show that an increase of the proportion of carbon dioxide produces a decrease of the mass flow rate, pressure, and exit mixture density, and an increase of the exit gas volume fraction and depth of the fragmentation level. A relevant result is the different role played by water and carbon dioxide in the eruption dynamics; an increasing amount of water produces an increase of the mass flow rate, and an increasing amount of carbon dioxide produces a decrease. Even small amounts of carbon dioxide have major consequences on the eruption dynamics, implying that the multicomponent nature of the volcanic gas must be taken into account in the prediction of the eruption scenario and the forecasting of volcanic hazard. Received: 6 March 1998 / Accepted: 28 October 1998     

Petrological characteristics and volatile content of magma from the 2000 eruption of Miyakejima Volcano, Japan

Among the series of eruptions at Miyakejima volcano in 2000, the largest summit explosion occurred on 18 August 2000. During this explosion, vesiculated bombs and lapilli having cauliflower-like shapes were ejected as essential products. Petrological observation and chemical analyses of the essential ejecta and melt inclusions were carried out in order to investigate magma ascent and eruption processes. SEM images indicate that the essential bombs and lapilli have similar textures, which have many tiny bubbles, crystal-rich and glass-poor groundmass and microphenocrysts of plagioclase, augite and olivine. Black ash particles, which compose 40% of the air-fall ash from the explosion, also have similar textures to the essential bombs. Whole-rock analyses show that the chemical composition of all essential ejecta is basaltic (SiO₂=51–52 wt%). Chemical analyses of melt inclusions in plagioclase and olivine phenocrysts indicate that melt in the magma had 0.9–1.9 wt% H₂O, <0.011 wt% CO₂, 0.04–0.17 wt% S and 0.06–0.1 wt% Cl. The variation in volatile content suggests degassing of the magma during ascent up to a depth of about 1 km. The ratio of H₂O and S content of melt inclusions is similar to that of volcanic gas, which has been intensely and continuously emitted from the summit since the end of August 2000, indicating that the 18 August magma is the source of the gas emission. Based on the volatile content of the melt inclusions and the volcanic gas composition, the initial bulk volatile content of the magma was estimated to be 1.6–1.9 wt% H₂O, 0.08–0.1 wt% CO₂, 0.11–0.17 wt% S and 0.06–0.07 wt% Cl. The basaltic magma ascended from a deeper chamber (10 km) due to decrease in magma density caused by volatile exsolution with pressure decrease. The highly vesiculated magma, which had at least 30 vol% bubbles, may have come into contact with ground water at sea level causing the large explosion of 18 August 2000.Editorial responsibility: S. Nakada, T. DuittAn erratum to this article can be found at     

Compositional heterogeneity of distal tephra deposits from the 1912 eruption of Novarupta, Alaska

Physical and chemical analyses of distal tephra from the 1912 eruption of Novarupta, Alaska, show considerable variations in glass and mineral compositions. A combination of a 150°C range in temperature deduced from iron-titanium oxide geothermometry, and curved patterns in bivariant element plots of glass compositions indicate that a chamber of compositionally zoned magma existed prior to the eruption. Magma-mixing cannot explain these features. The magma chamber may have resembled the model recently proposed by McBirney (1980). A highly silicic, quartz-phyric magma with mean phenocryst compositions of An₂₅ plagioclase, Fs₄₂ orthopyroxene, at a temperature of 880°C and a water pressure of 1.4 kbar, was located above a more mafic, hotter magma, bearing phenocrysts of An₄₅ plagioclase and Fs₃₅, orthopyroxene.Our results on distal tephras compare favorably with those from a recently completed study at source by Hildreth (1983), suggesting that useful petrologic information about distant volcanoes can be obtained from both types of deposits. Compositionally heterogeneous abyssal tephra layers are common in the Gulf of Alaska. Eruptions from chambers of zoned magma may account for many of these layers.     

Erratum to Compositional variations and magma mixing in the 1991 eruptions of Hudson volcano,Chile

The August 1991 eruptions of Hudson volcano produced ~2.7 km³ (dense rock equivalent, DRE) of basaltic to trachyandesitic pyroclastic deposits, making it one of the largest historical eruptions in South America. Phase 1 of the eruption (P1, April 8) involved both lava flows and a phreatomagmatic eruption from a fissure located in the NW corner of the caldera. The paroxysmal phase (P2) began several days later (April 12) with a Plinian-style eruption from a different vent 4 km to the south-southeast. Tephra from the 1991 eruption ranges in composition from basalt (phase 1) to trachyandesite (phase 2), with a distinct gap between the two erupted phases from 54–60 wt% SiO₂. A trend of decreasing SiO₂ is evident from the earliest part of the phase 2 eruption (unit A, 63–65 wt% SiO₂) to the end (unit D, 60–63 wt% SiO₂). Melt inclusion data and textures suggest that mixing occurred in magmas from both eruptive phases. The basaltic and trachyandesitic magmas can be genetically related through both magma mixing and fractional crystallization processes. A combination of observed phase assemblages, inferred water content, crystallinity, and geothermometry estimates suggest pre-eruptive storage of the phase 2 trachyandesite at pressures between ~50–100 megapascal (MPa) at 972 ± 26°C under water-saturated conditions (log fO₂ –10.33 (±0.2)). It is proposed that rising P1 basaltic magma intersected the lower part of the P2 magma storage region between 2 and 3 km depth. Subsequent mixing between the two magmas preferentially hybridized the lower part of the chamber. Basaltic magma continued advancing towards the surface as a dyke to eventually be erupted in the northwestern part of the Hudson caldera. The presence of tachylite in the P1 products suggests that some of the magma was stalled close to the surface (<0.5 km) prior to eruption. Seismicity related to magma movement and the P1 eruption, combined with chamber overpressure associated with basalt injection, may have created a pathway to the surface for the trachyandesite magma and subsequent P2 eruption at a different vent 4 km to the south-southeast. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Holocene tephrochronology record of large explosive eruptions in the southernmost Patagonian Andes

For regionally widespread Holocene tephra layers in southernmost Patagonia, correlations based on both chemical and chronological data indicate their derivation from five large-volume (>1 km³) explosive eruptions of four different volcanoes in the southernmost Andes. Bulk-tephra and tephra-glass major and trace-element chemistry and Sr isotopic ratios unambiguously distinguish different source volcanoes, and imply that two of the regionally widespread tephra (MB₁ and MB₂) were derived from Mt. Burney (52°S), one (R₁) from Reclus (51°S), one (A₁) from Aguilera (50°S) and one (H₁) from Hudson volcano (46°S). The H₁ tephra derived from the Hudson volcano, which is located at the southern end of the Andean Southern Volcanic Zone (SVZ; 33–46°S), contains distinctive greenish andesitic glass with FeO > 4.5 wt.% and TiO₂ > 1.2 wt.%. In contrast, rhyolitic glass in tephra derived from the eruptions of Mt. Burney, Reclus and Aguilera volcanoes, which are located in the Andean Austral Volcanic Zone (AVZ; 49–55°S), is clear and transparent and has significantly lower FeO and TiO₂. Tephra derived from these three AVZ volcanoes all contain plagioclase, orthopyroxene, minor clinopyroxene and amphibole. Biotite occurs only in the Aguilera A₁ tephra, which also has the highest bulk-tephra and tephra-glass K₂O and Rb contents. Averages of new and published ¹⁴C ages determined on organic material in soil and sediment samples above and below these tephra constrain the uncalibrated ¹⁴C age of the R₁ eruption of Reclus volcano to 12,685 ± 260 years BP, the MB₁ and MB₂ eruptions of Mt. Burney to 8,425 ± 500 and 3,830 ± 390 years BP, the Hudson H₁ eruption to 6,850 ± 160 years BP, and the A₁ eruption of Aguilera volcano to 3,000 ± 100 years BP. The volume of the largest of these eruptions, H₁ of the Hudson volcano, is estimated as >18 km³. The volume of the Reclus R₁ eruption is estimated at >10 km³, the Aguilera A₁ eruption at between 4 and 9 km³, and the younger Mt. Burney MB₂ eruption at ≥2.8 km³. The volume of the older MB₁ Mt. Burney eruption is the least well constrained, but must have been larger than the younger MB₂ eruption. The data indicate that the frequency of explosive activity of volcanic centers in the AVZ is lower than in the southern SVZ.     

Recycling of magmatic clasts during explosive eruptions: estimating the true juvenile content of phreatomagmatic volcanic deposits

The juvenile content of phreatomagmatic deposits contains both first-cycle juvenile clasts derived from magma at the instant of eruption, and recycled juvenile clasts, which were fragmented and first ejected by earlier explosions during the eruption, but fell back or collapsed into the vent. Recycled juvenile clasts are similar to accessory and accidental lithics in that they contribute no heat to further magma: water interaction, but previously no effective criteria have been defined to separate them from first-cycle juvenile clasts. We have investigated componentry parameters (vesicularity, clast morphology and extent of mud-coating) which, in specific circumstances, can distinguish between first-cycle juvenile clasts, involved in only one explosion, and such recycled juvenile clasts. Phreatomagmatic fall deposits commonly show gross grainsize and sorting characteristics identical to deposits of purely dry or magmatic eruptions. However the abundance of non-juvenile clasts in pyroclastic deposits is a sensitive indicator of the involvement of external water. If this component is calculated including recycled juvenile clasts with accidental and accessory clasts the contrast is even more striking. Data from a Holocene maar deposit in Taupo Volcanic Zone, New Zealand, suggest that the first-cycle juvenile component of the deposits is less than one-third of that determined by simple juvenile:lithic:crystal componentry.     

Eruptive dynamics and caldera collapse during the Onano eruption, Vulsini, Italy

The Onano explosive eruption of the Latera Volcanic Complex (Vulsini Volcanoes, Quaternary potassic Roman Comagmatic Region, Italy) provides an interesting example of multiple changes of eruptive style that were concomitant with a late phase of collapse of the polygenetic Latera Caldera. This paper reports a reconstruction of the event based on field analysis, laboratory studies of grain size and density of juvenile clasts, and re-interpretation of available subsurface geology data. The Onano eruption took place in a structurally weak area, corresponding to a carbonate substrate high bordered by the pre-existing Latera caldera and Bolsena volcano-tectonic depression, which controlled the ascent and eruption of a shoshonitic-phonotephritic magma through intersecting rim fault systems. Temporal changes of magma vesiculation, fragmentation and discharge rate, and consequent eruptive dynamics, were strongly controlled by pressure evolution in the magma chamber and changing vent geometry. Initially, pumice-rich pyroclastic flows were emplaced, followed by spatter- and lithic-rich flows and fallout from energetic fire-fountaining. The decline of magma pressure due to the partial evacuation of the magma chamber induced trapdoor collapse of the chamber roof, which involved part of the pre-existing caldera and external volcano slopes and eventually led to the present-day caldera. The widening of the vent system and the emplacement of the main pyroclastic flow and associated co-ignimbrite lag breccia marked the eruption climax. A sudden drop of the confining pressure, which is attributed to a pseudo-rigid behaviour of the magma chamber wall rocks during a phase of rapid magma drainage, led to extensive magma vesiculation and fragmentation. The disruption of the magma chamber roof and waning magma pressure in the late eruption stage favoured the explosive interaction of residual magma with groundwater from the confined carbonate aquifer. Pulsating hydrostatic and magma pressures produced alternating hydromagmatic pyroclastic surges, strombolian fallout and spatter flows.     

Holocene explosive activity of Hudson Volcano, southern Andes

 Fallout deposits in the vicinity of the southern Andean Hudson Volcano record at least 12 explosive Holocene eruptions, including that of August 1991 which produced ≥4 km³ of pyroclastic material. Medial isopachs of compacted fallout deposits for two of the prehistoric Hudson eruptions, dated at approximately 3600 and 6700 BP, enclose areas at least twice that of equivalent isopachs for both the 1991 Hudson and the 1932 Quizapu eruptions, the two largest in the Andes this century. However, lack of information for either the proximal or distal tephra deposits from these two prehistoric eruptions of Hudson precludes accurate volume estimates. Andesitic pyroclastic material produced by the 6700-BP event, including a  1 10-cm-thick layer of compacted tephra that constitutes a secondary thickness maximum over 900 km to the south in Tierra del Fuego, was dispersed in a more southerly direction than that of the 1991 Hudson eruption. The products of the 6700-BP event consist of a large proportion of fine pumiceous ash and accretionary lapilli, indicating a violent phreatomagmatic eruption. This eruption, which is considered to be the largest for Hudson and possibly for any volcano in the southern Andes during the Holocene, may have created Hudson's 10-km-diameter summit caldera, but the age of the caldera has not been dated independently. Received: 31 January 1997 / Accepted: 29 October 1997     

Storage and interaction of compositionally heterogeneous magmas from the 1986 eruption of Augustine Volcano, Alaska

Compositional heterogeneity (56–64 wt% SiO₂ whole-rock) in samples of tephra and lava from the 1986 eruption of Augustine Volcano, Alaska, raises questions about the physical nature of magma storage and interaction beneath this young and frequently active volcano. To determine conditions of magma storage and evolutionary histories of compositionally distinct magmas, we investigate physical and chemical characteristics of andesitic and dacitic magmas feeding the 1986 eruption. We calculate equilibrium temperatures and oxygen fugacities from Fe-Ti oxide compositions and find a continuous range in temperature from 877 to 947°C and high oxygen fugacities (ΔNNO=1–2) for all magmas. Melt inclusions in pyroxene phenocrysts analyzed by Fourier-transform infrared spectroscopy and electron probe microanalysis are dacitic to rhyolitic and have water contents ranging from <1 to ∼7 wt%. Matrix glass compositions are rhyolitic and remarkably similar (∼75.9–76.6 wt% SiO₂) in all samples. All samples have ∼25% phenocrysts, but lower-silica samples have much higher microlite contents than higher-silica samples. Continuous ranges in temperature and whole-rock composition, as well as linear trends in Harker diagrams and disequilibrium mineral textures, indicate that the 1986 magmas are the product of mixing between dacitic magma and a hotter, more mafic magma. The dacitic endmember is probably residual magma from the previous (1976) eruption of Augustine, and we interpret the mafic endmember to have been intruded from depth. Mixing appears to have continued as magmas ascended towards the vent. We suggest that the physical structure of the magma storage system beneath Augustine contributed to the sustained compositional heterogeneity of this eruption, which is best explained by magma storage and interaction in a vertically extensive system of interconnected dikes rather than a single coherent magma chamber and/or conduit. The typically short repose period (∼10 years) between Augustine's recent eruptive pulses may also inhibit homogenization, as short repose periods and chemically heterogeneous magmas are observed at several volcanoes in the Cook Inlet region of Alaska.     

Geology of a complex kimberlite pipe (K2 pipe,Venetia Mine,South Africa): insights into conduit processes during explosive ultrabasic eruptions

K2 is a steep-sided kimberlite pipe with a complex internal geology. Geological mapping, logging of drillcore and petrographic studies indicate that it comprises layered breccias and pyroclastic rocks of various grain sizes, lithic contents and internal structures. The pipe comprises two geologically distinct parts: K2 West is a layered sequence of juvenile- and lithic-rich breccias, which dip 20–45° inwards, and K2 East consists of a steep-sided pipe-like body filled with massive volcaniclastic kimberlite nested within the K2 pipe. The layered sequence in K2 West is present to > 900 m below present surface and is interpreted as a sequence of pyroclastic rocks generated by explosive eruptions and mass-wasting breccias generated by rock fall and sector collapse of the pipe walls: both processes occurred in tandem during the infill of the pipe. Several breccia lobes extend across the pipe and are truncated by the steep contact with K2 East. Dense pyroclastic rocks within the layered sequence are interpreted as welded deposits. K2 East represents a conduit that was blasted through the layered breccia sequence at a late stage in the eruption. This phase may have involved fluidisation of trapped pyroclasts, with loss of fine particles and comminution of coarse clasts. We conclude that the K2 kimberlite pipe was emplaced in several distinct stages that consisted of an initial explosive enlargement, followed by alternating phases of accumulation and ejection.     

Tephra-fall deposits from the 1992 eruption of Crater Peak, Alaska: implications of clast textures for eruptive processes

 The 1992 eruption of Crater Peak, Mount Spurr, Alaska, involved three subplinian tephra-producing events of similar volume and duration. The tephra consists of two dense juvenile clast types that are identified by color, one tan and one gray, of similar chemistry, mineral assemblage, and glass composition. In two of the eruptive events, the clast types are strongly stratified with tan clasts dominating the basal two thirds of the deposits and gray clasts the upper one third. Tan clasts have average densities between 1.5 and 1.7 g/cc and vesicularities (phenocryst free) of approximately 42%. Gray clasts have average densities between 2.1 and 2.3 g/cc, and vesicularities of approximately 20%; both contain abundant microlites. Average maximum plagioclase microlite lengths (13–15 μm) in gray clasts in the upper layer are similar regardless of eruptive event (and therefore the repose time between them) and are larger than average maximum plagioclase microlite lengths (9–11 μm) in the tan clasts in the lower layer. This suggests that microlite growth is a response to eruptive processes and not to magma reservoir heterogeneity or dynamics. Furthermore, we suggest that the low vesicularities of the clasts are due to syneruptive magmatic degassing resulting in microlitic growth prior to fragmentation and not to quenching of clasts by external groundwater. Received: 5 September 1997 / Accepted: 1 February 1998     

Sulfur,chlorine, and fluorine degassing and atmospheric loading by the 1783–1784 AD Laki (Skaftár Fires) eruption in Iceland

 The 1783–1784 Laki tholeiitic basalt fissure eruption in Iceland was one of the greatest atmospheric pollution events of the past 250 years, with widespread effects in the northern hemisphere. The degassing history and volatile budget of this event are determined by measurements of pre-eruption and residual contents of sulfur, chlorine, and fluorine in the products of all phases of the eruption. In fissure eruptions such as Laki, degassing occurs in two stages: by explosive activity or lava fountaining at the vents, and from the lava as it flows away from the vents. Using the measured sulfur concentrations in glass inclusions in phenocrysts and in groundmass glasses of quenched eruption products, we calculate that the total accumulative atmospheric mass loading of sulfur dioxide was 122 Mt over a period of 8 months. This volatile release is sufficient to have generated ∼250 Mt of H₂SO₄ aerosols, an amount which agrees with an independent estimate of the Laki aerosol yield based on atmospheric turbidity measurements. Most of this volatile mass (∼60 wt.%) was released during the first 1.5 months of activity. The measured chlorine and fluorine concentrations in the samples indicate that the atmospheric loading of hydrochloric acid and hydrofluoric acid was ∼7.0 and 15.0 Mt, respectively. Furthermore, ∼75% of the volatile mass dissolved by the Laki magma was released at the vents and carried by eruption columns to altitudes between 6 and 13 km. The high degree of degassing at the vents is attributed to development of a separated two-phase flow in the upper magma conduit, and implies that high-discharge basaltic eruptions such as Laki are able to loft huge quantities of gas to altitudes where the resulting aerosols can reside for months or even 1–2 years. The atmospheric volatile contribution due to subsequent degassing of the Laki lava flow is only 18 wt.% of the total dissolved in the magma, and these emissions were confined to the lowest regions of the troposphere and therefore important only over Iceland. This study indicates that determination of the amount of sulfur degassed from the Laki magma batch by measurements of sulfur in the volcanic products (the petrologic method) yields a result which is sufficient to account for the mass of aerosols estimated by other methods. Received: 30 May 1995 / Accepted: 19 April 1996     

The 1669 eruption at Mount Etna: chronology,petrology and geochemistry,with inferences on the magma sources and ascent mechanisms

 Analysis of the petrochemical characters of the 1669 Etnean lavas shows that they can be grouped into two sets: SET1 lavas were erupted from 11 to 20 March and are more primitive in composition than SET2, erupted later until the end of activity. Both sets may be interpreted as the result of crystallization under different conditions of two primary magmas which are compositionally slightly distinct and which fractionate different volumetric proportions of minerals. To explain why more mafic lavas (SET1) were erupted earlier than more acid ones (SET2), we argue that new deeper magma rose up into a reservoir where residing magma was fractionating. Density calculations demonstrate that new magma is less dense and may originate a plume, rapidly rising through the residing magma which is cooler and more volatile-depleted than the new magma. Calculations of uprise velocity assuming laminar flow are consistent with this hypothesis. Received: 20 November 1995 / Accepted: 2 August 1996     

Diverse patterns of ascent,degassing, and eruption of rhyolite magma during the 1.8 ka Taupo eruption,New Zealand: Evidence from clast vesicularity

The 22 km³ (DRE) 1.8 ka Taupo eruption ejected chemically uniform rhyolite in a wide range of eruptive styles and intensities. The 7 eruptive units include the ‘type examples’ of phreatoplinian (units 3 and 4) and ultraplinian fall (unit 5) deposits, and low-aspect-ratio ignimbrite (unit 6). Contrasts in bulk vesicularity, vesicle (and microlite) number densities and the size distributions of bubbles (and crystals) in the Taupo ejecta can be linked to the influence of shallow conduit processes on volatile exsolution and gas escape, before and during eruption, rather than changes in pre-eruptive chemistry. Existing work has modeled the individual phases of this complex eruption but not fully explained the abrupt shifts in style/intensity that occur between phases. We link these rapid transitions to changes in vent position, which permitted contrasts in storage, conduit geometry, and magma ascent history.     

Multiple origins of obsidian pyroclasts and implications for changes in the dynamics of the 1300 B.P. eruption of Newberry Volcano,USA

The pyroclastic deposits of the 1300 B.P. eruption of Newberry Volcano, OR, USA, contain minor amounts of obsidian (1–6 wt.%). The volatile (H₂O and CO₂) contents and textures of these clasts vary considerably. FTIR measurements of H₂O in obsidian pyroclasts range from 0.1 to 1.5 wt.% indicating equilibration pressures ≤20 MPa. CO₂ contents are low (<10 ppm) except in clasts that also contain xenolith powder that provided a local CO₂ source. Obsidian clasts exhibit a range of color and textural types that changed in relative proportion as the eruption progressed. Together these data indicate that there were multiple origins of obsidian and that the dominant source changed during the eruption. Early in the eruption, obsidian was almost entirely black or grey (microlite-bearing) and probably derived from dikes or wall rock fractures filled with vanguard magma or tuffisite that, together with wall rocks, were eroded and incorporated into the eruption column as the vent widened. Later in the eruption, following a brief cessation of activity, the proportion of obsidian to wallrock lithic clasts increased and new types of obsidian dominated, types that represent remnants of a shallow conduit plug, welded fallback material from within the conduit, and sheared and degassed magma from near the conduit walls. Analysis of bubble shapes preserved within obsidian indicates that shear stresses and shear rates varied by over two orders of magnitude, with maxima of 88 kPa and 10^−2.3 s⁻¹, respectively, based on an assumed magma temperature of 850°C. Furthermore, the highest shear rates and stresses, and the shortest flow times (10–20 min), are preserved in clasts that also contain wall rock. The longest deformation times (5 and 8 h) correspond to two microlite-rich clasts, suggesting that the higher microlite content results from slower ascent rates and/or longer magma residence times at shallow levels. Differences between obsidian pyroclasts from the Newberry eruption and those of the Mono Craters may relate to the nature of the conduit feeding the two events. From this comparison, we conclude that obsidian can provide information on time scales and mechanisms of pre-fragmentation magma ascent.     

Regional tectonic control on large size explosive eruptions: Insights into the Green Tuff ignimbrite unit of Pantelleria

Original geological and structural data, which derive from the analysis of the rheomorphic Green Tuff ignimbrite unit of Pantelleria, have offered the opportunity to define its modes of emplacement and the location of the eruptive sources in terms of distribution and geometry. The Green Tuff displays a wide range of rheomorphic structures consisting of preserved penetrative foliations, lineations and folds which, developed at distinct times, have been assigned to three major (D₁–D₃) deformation events accompanying and following the ignimbrite unit emplacement. The first D₁ event produced distinct sets of structures developed along ductile shear zones generated during the emplacement of pyroclastic density currents along current-deposit boundaries. Palaeoflow directions of this event are completely independent from topography and are directly related to high-energy currents generated from the eruption. D₂ event is characterized by folding due to down-slope post-emplacement flows related to gravity sliding processes whereas the D₃ event was dominated by semi-brittle to brittle structures developed after the complete emplacement of the flow units and their subsequent cooling and compaction. The statistical analysis of these structural data has led to the hypothesis that the Green Tuff eruption developed from fissural sources that are largely superimposed on the NNE-trending dip-slip normal fault zones of the island (the Zinedi and the Montagna Grande faults). Our model also implies that the Green Tuff ignimbrite deposit can be the result of several events within a single eruptive cycle. The orientation of the fissural eruptive systems is evidence that the feeding structures for this large-size explosive event were strongly controlled by the E-W to ESE-WNW directed extension structures that affect the island of Pantelleria and, as a whole, the entire region of the Sicily Channel.     

New physical characterization of the Fontana Lapilli basaltic Plinian eruption,Nicaragua

The Fontana Lapilli deposit was erupted in the late Pleistocene from a vent, or multiple vents, located near Masaya volcano (Nicaragua) and is the product of one of the largest basaltic Plinian eruptions studied so far. This eruption evolved from an initial sequence of fluctuating fountain-like events and moderately explosive pulses to a sustained Plinian episode depositing fall beds of highly vesicular basaltic-andesite scoria (SiO₂ > 53 wt%). Samples show unimodal grain size distribution and a moderate sorting that are uniform in time. The juvenile component predominates (> 96 wt%) and consists of vesicular clasts with both sub-angular and fluidal, elongated shapes. We obtain a maximum plume height of 32 km and an associated mass eruption rate of 1.4 × 10⁸ kg s⁻¹ for the Plinian phase. Estimates of erupted volume are strongly sensitive to the technique used for the calculation and to the distribution of field data. Our best estimate for the erupted volume of the majority of the climactic Plinian phase is between 2.9 and 3.8 km³ and was obtained by applying a power-law fitting technique with different integration limits. The estimated eruption duration varies between 4 and 6 h. Marine-core data confirm that the tephra thinning is better fitted by a power-law than by an exponential trend.     

Submarine flank eruption preceding caldera subsidence during the 2000 eruption of Miyakejima Volcano, Japan

During the early part of a seismic swarm preceding eruption and caldera formation at Miyakejima Volcano, discoloured sea surfaces were observed 1.5 km off the western coast of Miyakejima on 27 June 2000. A later survey of the area using a multi-beam side scan sonar and a remotely operated small submarine revealed four craters of 20–30 m diameter aligned east-west in a 100×10–30 m area on the seafloor, with hot water at 140°C being released from one of the centres. Each crater consists of submarine spatter overlain in part by scoria lapilli. Dredged spatter from the craters was fresh, and there was no evidence of activity of marine organisms on the spatter surface, indicating that the discoloured sea surface resulted from magmatic eruption on the seafloor. This eruption occurred when a westward-propagating seismic swarm, initiated beneath Miyakejimas summit, passed through the area. Finding new magma on the seafloor demonstrates that this seismic swarm was associated with intruding magma, moving outward from beneath Miyakejima. Submarine spatter shows flattened shapes with a brittle crust formed by cooling in water, and its composition is aphyric andesite of 54 wt% SiO₂. The spatter is similar in whole rock and mineral composition to spatter erupted in 1983. However, the wide range of Cl in melt inclusions in plagioclase of the 27 June submarine spatter shows that it is not simply a remnant of the 1983 magma, which has only high Cl melt inclusions in plagioclase. The mixed character of melt inclusions suggests involvement of a magma with low Cl melt inclusions. The magma erupted explosively on 18 August from Miyakejimas summit, considered as the second juvenile magma in this eruption, contains low Cl melt inclusions in plagioclase. Based on these observations and the eruption sequence, we present the following model: (1) A shallow magma chamber was filled with a remnant of 1983 magma that had evolved to a composition of 54–55 wt% SiO₂. (2) Injection of the 18 August magma into this chamber generated a mixed magma having a wide range of Cl in melt inclusions contained plagioclase. The magma mixing might have occurred shortly before the submarine eruption and could have been a trigger for the initiation of the removal of magma from the chamber as an extensive dyke, which eventually led to caldera subsidence.Editorial responsibility: S Nakada, T Druitt