The timing and extent of illite formation in Ordovician K-bentonites at the Cincinnati Arch, the Nashville Dome and north-eastern Illinois basin

The K/Ar ages of illite/smectite (I/S) were measured from Middle Ordovician K-bentonites both west and east of the present crest of the Cincinnati Arch and the Nashville dome to test a previous hypothesis that I/S formed by reaction with migrated saline solutions during the Alleghanian Orogeny. The K/Ar ages of I/S at the distal margin of the southern Appalachian basin and from central Indiana range from 251 to 277 Ma. However, the ages of I/S from west of the crest of the Cincinnati Arch are slightly older (286–301 Ma) and the ages of I/S from north-eastern Indiana, on the northern edge of the Kankakee Arch and in effect in the Michigan basin, are the oldest measured in this study (315–325 Ma). The westward decrease in the K/Ar ages of I/S from Late Pennsylvanian ages in the proximal basin (286–303 Ma) to Permian (251–277 Ma) at the distal margin suggest that I/S was formed by the westward migration of fluids during the Alleghanian Orogeny as opposed to being formed by projected deep burial by Permian sediments. Moreover, the available thermal maturation data suggest the Cincinnati Arch was not buried deeply. The ages of I/S west of the Cincinnati Arch are an enigma as they are older than the ages in the distal Appalachian basin. The ages of I/S from central Indiana within the Illinois basin suggest the possibility that I/S was formed by reaction with fluids that migrated from the Ouachita orogenic belt in Mississippi. The oldest ages of I/S from north-eastern Indiana suggest the formation of I/S might have been influenced by the presence of potassic brines from the Michigan basin.     

Tectono‐sedimentary Evolution of Early Pennsylvanian Alluvial Systems at the Onset of the Alleghanian Orogeny,Pocahontas Basin,Virginia

Foreland basin strata provide an opportunity to review the depositional response of alluvial systems to unsteady tectonic load variations at convergent plate margins. The lower Breathitt Group of the Pocahontas Basin, a sub‐basin of the Central Appalachian Basin, in Virginia preserves an Early Pennsylvanian record of sedimentation during initial foreland basin subsidence of the Alleghanian orogeny. Utilizing fluvial facies distributions and long‐term stacking patterns within the context of an ancient, marginal‐marine foreland basin provides stratigraphic evidence to disentangle a recurring, low‐frequency residual tectonic signature from high‐frequency glacioeustatic events. Results from basin‐wide facies analysis, corroborated with petrography and detrital zircon geochronology, support a two end‐member depositional system of coexisting transverse and longitudinal alluvial systems infilling the foredeep during eustatic lowstands. Provenance data suggest that sediment was derived from low‐grade metamorphic Grenvillian‐Avalonian terranes and recycling of older Palaeozoic sedimentary rocks uplifted as part of the Alleghanian orogen and Archean‐Superior‐Province. Immature sediments, including lithic sandstone bodies, were deposited within a SE‐NW oriented transverse drainage system. Quartzarenites were deposited within a strike‐parallel NE‐SW oriented axial drainage, forming elongate belts along the western basin margin. These mature quartzarenites were deposited within a braided fluvial system that originated from a northerly cratonic source area. Integrating subsurface and sandstone provenance data indicates significant, repeated palaeogeographical shifts in alluvial facies distribution. Distinct wedges comprising composite sequences are bounded by successive shifts in alluvial facies and define three low‐frequency tectonic accommodation cycles. The proposed tectonic accommodation cycles provide an explanation for the recognized low‐frequency composite sequences, defining short‐term episodes of unsteady westward migration of the flexural Appalachian Basin and constrain the relative timing of deformation events during cratonward progression of the Alleghanian orogenic wedge.     

Anticosti foreland basin offshore of western Newfoundland: Concealed record of northern Appalachian orogen development

The Anticosti Basin, largely hidden beneath the Gulf of St. Lawrence, includes foreland basin successions that record multiple tectonic events associated with the Ordovician to Devonian evolution of the northern Appalachian orogen. Due to the lack of well ties and minimal onshore exposure, geophysical data must be used in mapping the offshore stratigraphy. Outcropping geologic boundaries are tied to magnetic lineaments that parallel stratigraphy. These lineaments are correlated with reflections on seismic profiles in order to interpret the subsurface. Seismic isochron maps for successive basin development episodes display differences in geometry, implying that orogenic loading varied through time. The geometry and subsidence rates recorded by the Middle Ordovician Goose Tickle Group imply that it formed in a pro-arc setting associated with loading during arc-continent collision that was most intense in the northern Newfoundland Appalachians. The geometry and subsidence recorded by the overlying Long Point Group imply pro-arc loading by Taconian allochthons in the Québec segment of the orogen. Diachronous subduction polarity reversal along the margin placed the Long Point Group in a combined retro-arc and pro-arc setting, comparable to that experienced by parts of the north Australian margin at the present day. The uppermost Silurian to Lower Devonian Clam Bank Formation and Lower Devonian Red Island Road Formation represent foreland basin successions associated with the later Salinian and Acadian orogenies. Their consistent thickness implies a broad, shallow basin, suggesting that the lithosphere was cooler and stronger than during earlier subsidence, and are consistent with a retro-arc setting.     

Results from regional vibroseis profiling: Appalachian ultra-deep core hole site study

Summary. In 1985, 180 km of regional vibroseis profiles were acquired in the Carolinas and Georgia, southeastern United States, as part of the Appalachian Ultra-Deep Core Hole (ADCOH) Site Study. The data quality is excellent, with large-amplitude reflections from faults and crystalline rocks, lower Palaeozoic shelf strata and from within autochthonous Grenville basement. The profiles image the subsurface more clearly than other available data and allow the possibility of alternative interpretations of important elements of the tectonic framework of the southern Appalachians.
The major points in the interpretation are: 1) The Blue Ridge master decollement is at a depth of 2-3 km beneath the Blue Ridge. This thrust increases in dip just NW of the Brevard fault zone. 2) The Brevard fault zone appears to splay from the master decollement at 6 km (2.2 s) near Westminster, S.C., and defines the base of the crystalline Inner Piedmont allochthon. 3) Below the Blue Ridge thrust sheet are images of duplex and imbricate structures ("duplex tuning wedges") connected by other thrust faults that duplicate shelf strata to a thickness of 4–5 km. 4) Subhorizontal reflections from depths of 6 to 9 km may be from relatively undisturbed lower Palaeozoic strata as suggested by others. 5) Eocambrian-Cambrian(?) rift basins in the Grenville basement are also imaged.
The ADCOH data were originally recorded with 14–56 Hz bandwidth and 8 s length, but an extended Vibroseis correlation was used to produce 17 s data length revealing reflections from within the upper crust. Below 8 s, reflections from within the Grenville basement become weak, but are observable as late as 13 s; however, these Moho (?) reflections are generally short segments.     

Foreland basin systems

A foreland basin system is defined as: (a) an elongate region of potential sediment accommodation that forms on continental crust between a contractional orogenic belt and the adjacent craton, mainly in response to geodynamic processes related to subduction and the resulting peripheral or retroarc fold-thrust belt; (b) it consists of four discrete depozones, referred to as the wedge-top, foredeep, forebulge and back-bulge depozones – which of these depozones a sediment particle occupies depends on its location at the time of deposition, rather than its ultimate geometric relationship with the thrust belt; (c) the longitudinal dimension of the foreland basin system is roughly equal to the length of the fold-thrust belt, and does not include sediment that spills into remnant ocean basins or continental rifts (impactogens). The wedge-top depozone is the mass of sediment that accumulates on top of the frontal part of the orogenic wedge, including ‘piggyback’ and ‘thrust top’ basins. Wedge-top sediment tapers toward the hinterland and is characterized by extreme coarseness, numerous tectonic unconformities and progressive deformation. The foredeep depozone consists of the sediment deposited between the structural front of the thrust belt and the proximal flank of the forebulge. This sediment typically thickens rapidly toward the front of the thrust belt, where it joins the distal end of the wedge-top depozone. The forebulge depozone is the broad region of potential flexural uplift between the foredeep and the back-bulge depozones. The back-bulge depozone is the mass of sediment that accumulates in the shallow but broad zone of potential flexural subsidence cratonward of the forebulge. This more inclusive definition of a foreland basin system is more realistic than the popular conception of a foreland basin, which generally ignores large masses of sediment derived from the thrust belt that accumulate on top of the orogenic wedge and cratonward of the forebulge. The generally accepted definition of a foreland basin attributes sediment accommodation solely to flexural subsidence driven by the topographic load of the thrust belt and sediment loads in the foreland basin. Equally or more important in some foreland basin systems are the effects of subduction loads (in peripheral systems) and far-field subsidence in response to viscous coupling between subducted slabs and mantle–wedge material beneath the outboard part of the overlying continent (in retroarc systems). Wedge-top depozones accumulate under the competing influences of uplift due to forward propagation of the orogenic wedge and regional flexural subsidence under the load of the orogenic wedge and/or subsurface loads. Whereas most of the sediment accommodation in the foredeep depozone is a result of flexural subsidence due to topographic, sediment and subduction loads, many back-bulge depozones contain an order of magnitude thicker sediment fill than is predicted from flexure of reasonably rigid continental lithosphere. Sediment accommodation in back-bulge depozones may result mainly from aggradation up to an equilibrium drainage profile (in subaerial systems) or base level (in flooded systems). Forebulge depozones are commonly sites of unconformity development, condensation and stratal thinning, local fault-controlled depocentres, and, in marine systems, carbonate platform growth. Inclusion of the wedge-top depozone in the definition of a foreland basin system requires that stratigraphic models be geometrically parameterized as doubly tapered prisms in transverse cross-sections, rather than the typical ‘doorstop’ wedge shape that is used in most models. For the same reason, sequence stratigraphic models of foreland basin systems need to admit the possible development of type I unconformities on the proximal side of the system. The oft-ignored forebulge and back-bulge depozones contain abundant information about tectonic processes that occur on the scales of orogenic belt and subduction system.     

Pro- vs. retro-foreland basins

Alpine‐type mountain belts formed by continental collision are characterised by a strong cross‐sectional asymmetry driven by the dominant underthrusting of one plate beneath the other. Such mountain belts are flanked on either side by two peripheral foreland basins, one over the underthrust plate and one over the over‐riding plate; these have been termed pro‐ and retro‐foreland basins, respectively. Numerical modelling that incorporates suitable tectonic boundary conditions, and models orogenesis from growth to a steady‐state form (i.e. where accretionary influx equals erosional outflux), predicts contrasting basin development to these two end‐member basin types. Pro‐foreland basins are characterised by: (1) Accelerating tectonic subsidence driven primarily by the translation of the basin fill towards the mountain belt at the convergence rate. (2) Stratigraphic onlap onto the cratonic margin at a rate at least equal to the plate convergence rate. (3) A basin infill that records the most recent development of the mountain belt with a preserved interval determined by the width of the basin divided by the convergence rate. In contrast, retro‐foreland basins are relatively stable, are not translated into the mountain belt once steady‐state is achieved, and are consequently characterised by: (1) A constant tectonic subsidence rate during growth of the thrust wedge, with zero tectonic subsidence during the steady‐state phase (i.e. ongoing accretion‐erosion, but constant load). (2) Relatively little stratigraphic onlap driven only by the growth of the retro‐wedge. (3) A basin fill that records the entire growth phase of the mountain belt, but only a condensed representation of steady‐state conditions. Examples of pro‐foreland basins include the Appalachian foredeep, the west Taiwan foreland basin, the North Alpine Foreland Basin and the Ebro Basin (southern Pyrenees). Examples of retro‐foreland basins include the South Westland Basin (Southern Alps, New Zealand), the Aquitaine Basin (northern Pyrenees), and the Po Basin (southern European Alps). We discuss how this new insight into the variability of collisional foreland basins can be used to better interpret mountain belt evolution and the hydrocarbon potential of these basins types.     

Post‐orogenic thermal history and exhumation of the northern Appalachian Basin: Low‐temperature thermochronologic constraints

Apatite fission‐track (AFT) thermochronology and (U‐Th)/He (AHe) dating, combined with paleothermometers and independent geologic constraints, are used to model the thermal history of Devonian Catskill delta wedge strata. The timing and rates of cooling determines the likely post‐orogenic exhumation history of the northern Appalachian Foreland Basin (NAB) in New York and Pennsylvania. AFT ages generally young from west to east, decreasing from ~185 to 120 Ma. AHe single‐grain ages range from ~188 to 116 Ma. Models show that this part of the Appalachian foreland basin experienced a non‐uniform, multi‐stage cooling history. Cooling rates vary over time, ~1–2 °C/Myr in the Early Jurassic to Early Cretaceous, ~0.15–0.25 °C/Myr from the Early Cretaceous to Late Cenozoic, and ~1–2 °C/Myr beginning in the Miocene. Our results from the Mesozoic are broadly consistent with earlier studies, but with the integration of multiple thermochronometers and multi‐kinetic annealing algorithms in newer inverse thermal modeling programs, we constrain a Late Cenozoic increase in cooling which had been previously enigmatic in eastern U.S. low‐temperature thermochronology datasets. Multi‐stage cooling and exhumation of the NAB is driven by post‐orogenic basin inversion and catchment drainage reorganization, in response to changes in base level due to rifting, plus isostatic and dynamic topographic processes modified by flexure over the long (~200 Myr) post‐orogenic period. This study compliments other regional exhumation data‐sets, while constraining the timing of post‐orogenic cooling and exhumation in the NAB and contributing important insights on the post‐orogenic development and inversion of foreland basins along passive margins.     

COCORP: new perspectives on the deep crust

Summary. Relict sutures from colliding continents, regions characterized by a "young" Mono, layering and faulting throughout the crust, mid-crustal magma traps, and seismic "bright spots" which suggest deep crustal fluids are among recent COCORP findings. In addition, new studies of signal penetration, noise mitigation, recording geometry, and coherency filtering have yielded better understanding of, and substantial improvements in, data quality. Amplitude anomalies, or "bright spots", in the Basin and Range may be due to magma at mid-crustal levels; in one case, a normal fault appears to link the deep magma with young surface volcanics. Another bright spot. 15 km deep in southeastern Georgia, has a flat geometry that suggests a gas/liquid interface, perhaps within fluids underthrust along an Appalachian suture. The Mono continues to appear relatively undisturbed in many regions of past deformation, suggesting that its formation post-dates these major tectonic episodes. The diversity of reflection patterns from the U.S. Cordillera casts further doubt on the generality of the common model of a reflective, layered lower crust underlying a transparent upper crust.     

Teleseismic delay-time tomography of the upper mantle beneath southeastern India: imprint of Indo–Antarctica rifting

A 3-D P -velocity map of the crust and upper mantle beneath the southeastern part of India has been reconstructed through the inversion of teleseismic traveltimes. Salient geological features in the study region include the Archean Dharwar Craton and Eastern Ghat metamorphic belt (EGMB), and the Proterozoic Cuddapah and Godavari basins. The Krishna–Godavari basin, on the eastern coastal margin, evolved in response to the Indo–Antarctica breakup. A 24-station temporary network provided 1161 traveltimes, which were used to model 3-D P -velocity variation. The velocity model accounts of 80 per cent of the observed data variance. The velocity picture to a depth of 120 km shows two patterns: a high velocity beneath the interior domain (Dharwar craton and Cuddapah basin), and a lower velocity beneath the eastern margin region (EGMB and coastal basin). Across the array velocity variations of 7–10 per cent in the crust (0–40 km) and 3–5 per cent in the uppermost mantle (40–120 km) are observed. At deeper levels (120–210 km) the upper-mantle velocity differences are insignificant among different geological units. The presence of such a low velocity along the eastern margin suggests significantly thin lithosphere (<100 km) beneath it compared to a thick lithosphere (>200 km) beneath the eastern Dharwar craton. Such lithospheric thinning could be a consequence of Indo–Antarctica break-up.     

Tectonic loading, sedimentation, and sea-level changes in the foreland basin of north-west Alberta and north-east British Columbia, Canada

By calculating mass accumulation rates for foreland basin sediments, the changing capacity of the basin can be monitored through time. It has often been assumed that there was a direct link between foreland basin sedimentation and tectonic deformation and lithospheric loading in the adjacent orogenic belt. The results of this study suggest that tectonic deformation is most likely associated with the changing capacity of the basin and the rate at which sediments accumulate within it, However, there appears to be no relation between tectonic deformation and the lithology of sediment which accumulates in the foreland basin. Instead, eustatic sea-level fluctuations appear to have significant control, through their impact on water depth, on the lithology of sediments accumulating in the foreland basin. These relations are evidenced by mass accumulation rates calculated for foreland basin strata in north-west Alberta and north-east British Columbia, Canada.     

Detrital record of Mesozoic shortening in the Yanshan belt, NE China: testing structural interpretations with basin analysis

The Yanshan fold‐thrust belt is an exposed portion of a major Mesozoic orogenic system that lies north of Beijing in northeast China. Structures and strata within the Yanshan record a complex history of thrust faulting characterized by multiple deformational events. Initially, Triassic thrusting led to the erosion of a thick sequence of Proterozoic and Palaeozoic sedimentary strata from northern reaches of the thrust belt; Triassic–Lower Jurassic strata that record this episode are deposited in a thin belt south of this zone of erosion. This was followed by postulated Late Jurassic emplacement of a major allochthon (the Chengde thrust plate), which is thought to have overridden structures and strata associated with the Triassic event and is cut by two younger thrusts (the Gubeikou and Chengde County thrusts). The Chengde allochthon is now expressed as a major east–west trending, thrust‐bounded synform (the Chengde synform), which has been interpreted as a folded klippe 20 km wide underlain by a single, north‐vergent thrust fault. Two sedimentary basins, defined on the basis of provenance, geochronology and palaeodispersal trends, developed within the Yanshan belt during Late Jurassic–Early Cretaceous time and are closely associated with the Chengde thrust and allied structures. Shouwangfen basin developed in the footwall of the Gubeikou thrust and records syntectonic unroofing of the hanging wall of that fault. Chengde basin developed in part atop Proterozoic strata interpreted as the upper plate of the Chengde allochthon and records unroofing of the adjacent Chengde County thrust. Both the Chengde County thrust and the Gubeikou thrust are younger than emplacement of the postulated Chengde allochthon, and structurally underlie it, yet neither Shouwangfen basin nor Chengde basin contain a detrital record of the erosion of this overlying structure. In addition, facies, palaeodispersal patterns and geochronology of Upper Jurassic strata that are cut by the Chengde thrust suggest only limited (ca. 5 km) displacement along this fault. We suggest that the units forming the Chengde synform are autochthonous, and that the synform is bounded by two limited‐displacement faults of opposing north and south vergence, rather than a single large north‐directed thrust. This conclusion implies that the Yanshan belt experienced far less Late Jurassic shortening than was previously thought, and has major implications for the Mesozoic evolution of the region. Specifically, we argue that the bulk of shortening and uplift in the Yanshan belt was accomplished during Triassic–Early Jurassic time, and that Late Jurassic structures modified and locally ponded sediments from a well‐developed southward drainage system developed atop this older orogen. Although Upper Jurassic strata are widespread throughout the Yanshan belt, it is clear that these strata developed within several discrete intermontane basins that are not correlable across the belt as a single entity. Thus, the Yanshan has no obvious associated foreland basin, and determining where the Mesozoic erosional products of this orogen ultimately lie is one of the more intriguing unresolved questions surrounding the palaeogeography of North China.     

Patterns of basin fill in Triassic turbidites of the Nanpanjiang basin: implications for regional tectonics and impacts on carbonate‐platform evolution

The Nanpanjiang Basin occurs in a key position for resolving controversies of basin tectonics and patterns of plate assembly at the junction between south China and Southeast Asian plates. Paleocurrent measurements indicate that siliciclastic turbidites in the basin were sourced by the Precambrian Jiangnan uplift to the northeast, the Precambrian Yunkai uplift to the southeast and the Triassic Songma suture to the south. Detrital zircon geochronology reveals Archean (2500 Ma), Paleoproterozoic (1800–1900 Ma), Neoproterozoic (900–1000 Ma) and Paleozoic (420–460 Ma) ages consistent with derivation from the Jiangnan and Yunkai uplifts. A large Permian‐Triassic peak of 250 Ma is present in the southern basin and attenuates northward suggesting derivation from an arc developed along the Songma suture. Sandstone QFL compositions average 65/12/23% and plot in the recycled orogen field except for a few samples in the southern basin that fall in the dissected arc field. The compositions are consistent with derivation from Precambrian basement that includes orogenic complexes. In the southern basin, Middle Triassic turbidites contain greater lithics and feldspars and Lower Triassic turbidites have volcaniclastic composition consistent with derivation from a southerly arc. Our preferred interpretation is evolution from remnant basin to a large peripheral foreland with southward subduction and convergence with Indochina along the Songma suture. The previously proposed Dian‐Qiong zone is not a suture as its map location places it within carbonate platforms bounded by identical stratigraphy. The Nan‐Uttaradit zone is too distant to have provided voluminous siliciclastic flux to the basin. The Nanpanjiang Basin provides an example of the evolution of an exceptionally large foreland with far‐field rejuvenation of Precambrian uplifts and carbonate platforms that were significantly influenced by siliciclastic flux. The timing and pattern of turbidite basin fill impacted platform evolution by enabling margin progradation in areas proximal to siliciclastic sources, whereas platforms distant from sources were driven to aggradation and extreme relief with large‐scale gravitational sector collapse.     

Appalachian basin stratigraphic response to convergent-margin structural evolution

ABSTRACT From study of Palaeozoic formations in the Appalachian foreland basin, a predictive stratigraphic model is proposed based on facies tract development during convergent-margin structural evolution. Five major facies tracts are recognized: shallow-water carbonates that formed during interorogenic quiescence and initial foreland subsidence; deep-water siliciclastics that accumulated in the proximal foreland basin during early collision; syn-collisional shallow-water siliciclastics; syn-collisional, channellized fluvial sandstones that aggraded in the proximal foreland; and progradational shoreline sandstones that were deposited in response to filling of the proximal foreland. Two other facies tracts that occur are organic-rich siliciclastics ('black shales'), which accumulated in oxygen-deficient areas of low clastic-sediment influx, and incised valley-fill deposits, which formed where subsidence rate was low.
Because the origin of each facies tract is dependent upon a unique combination of rate of accommodation change and rate of sediment supply, facies tract distribution is predictable from spatial and temporal patterns of subsidence and uplift associated with plate convergence. Alternating phases of thrust loading and quiescence caused fluctuations between underfilled and overfilled conditions during Palaeozoic evolution of the Appalachian basin. Along-strike variations in stratigraphic thickness, facies tract distribution, and development of unconformities in the Appalachian basin reflect the influence of structural irregularities along the collisional margin. In distal parts of the Appalachian foreland and in areas of structural recesses, eustatic influence on stratigraphic patterns is expressed more clearly than in areas of higher subsidence rate.     

Oligocene‐Miocene Great Lakes in the India‐Asia Collision Zone

The Himalayan‐Tibetan Plateau is Earth's highest topographic feature, and formed largely during Cenozoic time as India collided with and subducted beneath southern Asia. The >1300 km long, late Oligocene‐early Miocene Kailas basin formed within the collisional suture zone more than 35 Ma after the onset of collision, and provides a detailed picture of surface environments, processes and possible geodynamic mechanisms operating within the suture zone during the ongoing convergence of India and Asia. We present new geochronological, sedimentological, organic geochemical and palaeontological data from a previously undocumented 400 km long portion of the Kailas basin. The new data demonstrate that this part of the basin was partly occupied by large, deep, probably meromictic lakes surrounded by coal‐forming swamps. Lacustrine facies include coarse‐ and fine‐grained turbidites, profundal black shales and marginal Gilbert‐type deltas. Organic geochemical temperature proxies suggest that palaeolake water was warmer than 25 °C, and cyprinid fish fossils indicate an ecology capable of supporting large fish. Our findings demonstrate a brief period of low elevation in the suture zone during Oligocene‐Miocene time (26–21 Ma) and call for a geodynamic mechanism capable of producing a long (>1000 km) and narrow basin along the southern edge of the upper, Asian plate, long after the onset of intercontinental collision. Kailas basin deposits presently are exposed at elevations >6000 m, requiring dramatic elevation gain in the region after Kailas deposition, without strongly shortening the upper crust. Episodic Indian slab rollback, followed by break‐off and subsequent renewal of flat‐slab subduction, can account for features of the Kailas basin.     

Tectonic implications of new Appalachian Ultradeep Core Hole (ADCOH) seismic reflection data from the crystalline southern Appalachians

Summary. Some 180 km of new VIBROSEIS profiles have been acquired in the southern Appalachian Inner Piedmont, Brevard fault zone and eastern Blue Ridge as part of the ADCOH Project site investigation. These data are of the highest quality yet obtained in a crystalline terrane in the US, perhaps in the world, and reveal several conclusions that should have a direct bearing upon the world-wide nature of composite crystalline thrust sheets and their modes of interaction with the platform rocks beneath. Strong reflections previously interpreted as the base of the crystalline sheet are clearly part of the platform sedimentary (clastic rocks) sequence resting upon the autochthonous basement and early Palaeozoic rift basins. This reflection package and related transparent zones are clearly repeated beneath the crystalline sheet indicating a complex of thrusts repeating units within the platform succession. Reflectors (granitoid-amplibolite contacts) in the crystalline sheet in the Inner Piedmont represent recumbent folds of similar wavelengths and amplitudes to folds mappable on the surface. Duplexing of platform rocks beneath the crystalline sheet appears to have resulted in doming of the crystalline sheet. Similarly, duplex formation in the platform was probably controlled by both the thickness of the crystalline sheet and the rheological properties of the platform succession.     

Quaternary features beneath Lake Simcoe,Ontario, Canada: drumlins,tunnel channels,and records of proglacial to postglacial closed and overflowing lakes

Lake Simcoe is a large lake 45 km across and in places over 30 m deep, located between Lake Huron and Lake Ontario, in the glaciated terrain of southern Ontario, Canada. Seismostratigraphic analysis of high-resolution seismic reflection profiles, together with lakebed sediment sampling and pollen study, revealed distinctive sequences in the sediments beneath Lake Simcoe, Ontario. A surface unit (Blue Sequence) of soft Holocene mud (low-amplitude surface reflection, discontinuous parallel internal reflections) lies in the deeper basins of the lake. The underlying unit (Green Sequence) is characterized by high-amplitude parallel internal reflections; basal sediments of this sequence consist of clay rhythmites with dropstones. The Green Sequence was deposited by lacustrine sedimentation in proglacial Lake Algonquin; sedimentation persisted until the basin was isolated from other glacial lakes at about 10 ¹⁴C ka at the Penetang post-Algonquin phase. Subsequent erosion of the uppermost portion of the Green Sequence is attributed to wave action in a low-level early Holocene lake, possibly closed hydrologically and coeval with closed lowstands in the Huron and Georgian Bay basins. Two sequences with high-amplitude surface reflections and chaotic internal reflections (Purple and Red Sequences) lie below the Green Sequence. Northeast-southwest trending ridges, tens of metres in height, on the Red Sequence (the lowermost of these two units) are interpreted to be drumlins. An erosion surface descends into narrow valleys 50–80 m deep beneath the lake in bays to the west and south of the main lake basin. These depressions are interpreted as subglacial tunnel channels cut by rapid flows of meltwater. The sediments of Purple Sequence are interpreted as channel-fill sediments rapidly deposited during waning stages of the meltwater drainage. The Red Sequence is correlated with the Newmarket Till of the last glacial maximum identified beneath the Oak Ridges Moraine to the south.     

LISPB – IV. Crustal structure of Northern Britain

Summary. This paper presents those results from the 1974 Lithospheric Seismic Profile in Britain (LISPB) which relate to the compressional velocity structure of the crust and uppermost mantle beneath Northern Britain. A combination of interpretation techniques suitable for modelling laterally inhomogeneous media, including two-dimensional ray-tracing and time-term analysis, has resulted in a detailed seismic cross-section across the Caledonian orogenic belt. The main features of this section are a possible horizontal discontinuity in the Pre-Caledonian'basement, a change in the relationship between the lower crust and the uppermost mantle from north to south and a considerable thickening of the crust beneath the Caledonian fold belt. These results place considerable constraints upon tectonic models for the evolution of the Caledonides in particular in their implication of differing crustal structures north and south of the Southern Uplands and their indication of the primary significance of the Southern Uplands Fault.     

Origin of early overpressure in the Upper Devonian Catskill Delta Complex, western New York state

The Upper Devonian Rhinestreet black shale of the western New York state region of the Appalachian Basin has experienced multiple episodes of overpressure generation manifested by at least two sets of natural hydraulic fractures. These overpressure events were thermal in origin and induced by the generation of hydrocarbons during the Alleghanian orogeny close to or at the Rhinestreet's ～3.1 km maximum burial depth. Analysis of differential gravitational compaction strain of the organic‐rich shale around embedded carbonate concretions that formed within a metre or so of the seafloor indicates that the Rhinestreet shale was compacted ～58%. Compaction strain was recalculated to a palaeoporosity of 37.8%, in excess of that expected for burial >3 km. The palaeoporosity of the Rhinestreet shale suggests that porosity reduction caused by normal gravitational compaction of the low‐permeability carbonaceous sediment was arrested at some depth shy of its maximum burial depth by pore pressure in excess of hydrostatic. The depth at which the Rhinestreet shale became overpressured, the palaeo‐fluid retention depth, was estimated by use of published normal compaction curves and empirical porosity‐depth algorithms to fall between 850 and 1380 m. Early and relatively shallow overpressuring of the Rhinestreet shale likely originated by disequilibrium compaction induced by a marked increase in sedimentation rate in the latter half of the Famennian stage (Late Devonian) as the Catskill Delta Complex prograded westward across the Appalachian Basin in response to Acadian tectonics. The regional Upper Devonian stratigraphy of western New York state indicates that the onset of overpressure occurred at a depth of ～1100 m, well in advance of the Rhinestreet shale's entry into the oil window during the Alleghanian orogeny.     

Southern Appalachian hillslope erosion rates measured by soil and detrital radiocarbon in hollows

Understanding the dynamics of sediment generation and transport on hillslopes provides important constraints on the rate of sediment output from orogenic systems. Hillslope sediment fluxes are recorded by organic material found in the deposits infilling unchanneled convergent topographic features called hollows. This study describes the first hollow infilling rates measured in the southern Appalachian Mountains. Infilling rates (and bedrock erosion rates) were calculated from the vertical distribution of radiocarbon ages at two sites in the Coweeta drainage basin, western North Carolina. At each site we dated paired charcoal and silt soil organic matter samples from five different horizons. Paired radiocarbon samples were used to bracket the age of the soil material in order to capture the range of complex soil forming processes and deposition within the hollows. These dates constrain hillslope erosion rates of between 0.051 and 0.111 mm yr^− 1. These rates are up to 4 times higher than spatially-averaged rates for the Southern Appalachian Mountains making creep processes one of the most efficient erosional mechanisms in this mountain range. Our hillslope erosion rates are consistent with those of forested mountain ranges in the western United States, suggesting that the mechanisms (dominantly tree throw) driving creep erosion in both the western United States and the Southern Appalachian Mountains are equally effective.     

Architecture of the evaporite accumulation and salt structures dynamics in Tiddlybanken Basin,southeastern Norwegian Barents Sea

An extensive, reprocessed two‐dimensional (2D) seismic data set was utilized together with available well data to study the Tiddlybanken Basin in the southeastern Norwegian Barents Sea, which is revealed to be an excellent example of base salt rift structures, evaporite accumulations and evolution of salt structures. Late Devonian–early Carboniferous NE‐SW regional extensional stress affected the study area and gave rise to three half‐grabens that are separated by a NW‐SE to NNW‐SSE trending horst and an affiliated interference transfer zone. The arcuate nature of the horst is believed to be the effect of pre‐existing Timanian basement grain, whereas the interference zone formed due to the combined effect of a Timanian (basement) lineament and the geometrical arrangement of the opposing master faults. The interference transfer zone acted as a physical barrier, controlling the facies distribution and sedimentary thickness of three‐layered evaporitic sequences (LES). During the late Triassic, the northwestern part of a salt wall was developed due to passive diapirism and its evolution was influenced by halite lithology between the three‐LES. The central and southeastern parts of the salt wall did not progress beyond the pedestal stage due to lack of halite in the deepest evaporitic sequence. During the Triassic–Jurassic transition, far‐field stresses from the Novaya Zemlya fold‐and‐thrust belt reactivated the pre‐salt Carboniferous rift structures. The reactivation led to the development of the Signalhorn Dome, rejuvenated the northwestern part of the salt wall and affected the sedimentation rates in the southeastern broad basin. The salt wall together with the Signalhorn Dome and the Carboniferous pre‐salt structures were again reactivated during post‐Early Cretaceous, in response to regional compressional stresses. During this main tectonic inversion phase, the northwestern and southeastern parts of the salt wall were rejuvenated; however, salt reactivation was minimized towards the interference transfer zone beneath the centre of the salt wall.