Estimation and propagation of error in measurements of river channel movement from aerial imagery

Rates of river channel migration or widening are only valid if it can be demonstrated that the amount of change in the measured parameters exceeds the measurement errors. However, it is still uncommon to see estimates of errors presented alongside rates of river channel change measured from aerial photography. Here, detailed methods are presented for the estimation of errors in quantifying channel migration rates that can be easily applied to GIS‐based analysis of planform change. In addition, the impact of relaxing assumptions regarding error independence between image dates and systematic registration errors is presented and discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

Application of aerial photography to the study of small scale upper ocean phenomena

The industrial waste dumped 180 n. miles south of Galveston was monitored in July 1977 by water sampling, hydrographic measurements, acoustic tracking on board two vessels, and by aerial photography. The plume of the waste diffused vertically and horizontally. Photodensitometry of aerial photos of the plume showed lateral dispersion of the plume in agreement with two other methods: acoustic tracking of the waste suspensoid and transmissometer sampling. In addition, the method showed small scale features like the lateral and longitudinal variations in the photodensity, indicating the waste concentration. This waste concentration showed periodic changes in its axial distance, with the spectral peak at about 160 m wave length. It shows a sharp increase at the windward edge of the plume as do the acoustic records. This phenomenon is explained in terms of the shearing current near the surface together with vertical diffusion. The periodic change along the axis is explained in terms of the Langmuir circulation and in terms of internal ship waves.     

Anthropogenic debris on beaches in the SE Pacific (Chile): Results from a national survey supported by volunteers

Anthropogenic marine debris (AMD) is an ubiquitous problem, which has motivated public participation in activities such as beach surveys and clean-up campaigns. While it is known that beaches in the SE Pacific are also affected by this problem, the quantities and types of AMD remain largely unknown. In the context of an outreach project, volunteers (1500 high-school students) participated in a nation-wide survey of AMD on 43 beaches distributed randomly along the entire Chilean coast (18°S to 53°S). The mean density of AMD was 1.8 items m⁻² and the major types were plastics, cigarette butts and glass. Densities in central Chile were lower than in northern and southern Chile, which could be due to different attitudes of beach users or to intense beach cleaning in central regions. We suggest that public participation in surveys and cleaning activities will raise awareness and thereby contribute to an improvement of the situation.     

Metal concentrations in water and sediments from tourist beaches of Acapulco, Mexico

A survey on the metal concentrations (As, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sr, V, Zn) in beach water and sediments is reported from the tourist destination of Acapulco city on the Pacific coast of Mexico. The concentration of dissolved trace metals (DTMs) in beach water and acid leachable trace metals (ALTMs) in sediments indicated that they are anthropogenic in nature due to the increased tourist activities in the crowded beach locations. The statistical analysis indicates Fe and Mn play a major role as metal scavengers in both the medium (water and sediment) and the higher value of other metals is site specific in the study area, indicating that they are transported from the local area. Comparison results suggest that the beach water quality has deteriorated more than the sediments and special care needs to be taken to restore the beach quality.     

Using blood samples to estimate persistent organic pollutants and metals in green sea turtles (Chelonia mydas)

Persistent organic pollutants (POPs) and heavy metals have been reported in a number of green turtle (Chelonia mydas) populations worldwide. However, due to ethical considerations, these studies have generally been on tissues from deceased and stranded animals. The purpose of this study was to investigate the use of blood samples to estimate the tissue contamination of live C. mydas populations. This study analysed 125 POP compounds and eight heavy metals in the blood, liver, kidney and muscle of 16 C. mydas from the Sea World Sea Turtle Rehabilitation Program, Gold Coast, Australia. Strong correlations were observed between blood and tissue concentrations for a number of POPs and metals. Furthermore, these correlations were observed over large ranges of turtle size, sex and condition. These results indicate that blood samples are a reliable non-lethal method for predicting chemical contamination in C. mydas.     

Deployment of an unmanned aerial system to assist in mapping an intermittent stream

Recent growth in the capabilities of unmanned aerial vehicles and systems (UASs) as airborne platforms for collecting environmental data has been very rapid. There are now ample examples in the literature of UASs being deployed to map fine‐scale vegetation, glacial, soil and atmospheric conditions. The purported advantages of UASs are their ability to collect spatial data at lower cost, lower risk, higher resolution and higher frequency than ground surveys or satellite platforms. In this specific study, whether or not obtaining high‐resolution UAS imagery was advantageous for identifying an intermittent stream network was determined by comparing it with coarse‐scale satellite imagery collected for the same purpose. It was also determined if the UAS imagery could be an improvement to Global Positioning System acquired ground‐truth points for classifying an intermittent stream network across the same large‐scale satellite image. The UAS‐acquired and satellite‐acquired imageries were derived from a visible spectrum camera capable of 2‐cm resolution and multispectral SPOT‐5 with 10‐m resolution, respectively. The SPOT‐5 imagery with its relatively coarse resolution could not always detect the narrow intermittent stream, which was well resolved in the UAS imagery. When a classified UAS image was applied as a training area for the SPOT‐5 image, the identification of the stream network and accuracy of the satellite imagery classification did not necessarily improve. UASs have the potential to revolutionize hydrological research the same way that geographic information systems did three decades ago. A final goal of the paper is to provide insight into the advantages and disadvantages of deploying a UAS for this kind of research. © 2015 Her Majesty the Queen in Right of Canada. Hydrological Processes. © 2015 John Wiley & Sons, Ltd.     

Testing the utility of structure‐from‐motion photogrammetry reconstructions using small unmanned aerial vehicles and ground photography to estimate the extent of upland soil erosion

Quantifying the extent of soil erosion at a fine spatial resolution can be time consuming and costly; however, proximal remote sensing approaches to collect topographic data present an emerging alternative for quantifying soil volumes lost via erosion. Herein we compare terrestrial laser scanning (TLS), and both unmanned aerial vehicle (UAV) and ground photography (GP) structure‐from‐motion (SfM) derived topography. We compare the cost‐effectiveness and accuracy of both SfM techniques to TLS for erosion gully surveying in upland landscapes, treating TLS as a benchmark. Further, we quantify volumetric soil loss estimates from upland gullies using digital surface models derived by each technique and subtracted from an interpolated pre‐erosion surface. Soil loss estimates from UAV and GP SfM reconstructions were comparable to those from TLS, whereby the slopes of the relationship between all three techniques were not significantly different from 1:1 line. Only for the TLS to GP comparison was the intercept significantly different from zero, showing that GP is more capable of measuring the volumes of very small erosion features. In terms of cost‐effectiveness in data collection and processing time, both UAV and GP were comparable with the TLS on a per‐site basis (13.4 and 8.2 person‐hours versus 13.4 for TLS); however, GP was less suitable for surveying larger areas (127 person‐hours per ha^?1 versus 4.5 for UAV and 3.9 for TLS). Annual repeat surveys using GP were capable of detecting mean vertical erosion change on peaty soils. These first published estimates of whole gully erosion rates (0.077 m a^?1) suggest that combined erosion rates on gully floors and walls are around three times the value of previous estimates, which largely characterize wind and rainsplash erosion of gully walls. Copyright © 2017 John Wiley & Sons, Ltd.     

Quantities,composition, and sources of beach debris in Korea from the results of nationwide monitoring

This study assessed the levels of marine debris pollution and identified its main sources in Korea. The surveys were bimonthly conducted by NGO leaders and volunteers on 20 beaches from March 2008 to November 2009. The quantities of marine debris were estimated at 480.9 (±267.7) count ⋅ 100 m⁻¹ for number, 86.5 (±78.6) kg ⋅ 100 m⁻¹ for weight, and 0.48 (±0.38) m³ ⋅ 100 m⁻¹ for volume. The level of marine debris pollution on the Korean beaches was comparable to that in the coastal areas of the North Atlantic ocean and South Africa. Plastics and styrofoam occupied the majority of debris composition in terms of number (66.7%) and volume (62.3%). The main sources of debris were fishing activities including commercial fisheries and marine aquaculture (51.3%). Especially styrofoam buoy from aquaculture was the biggest contributor to marine debris pollution on these beaches.     

In situ stress measurements in a borehole close to the Nojima Fault

Abstract In situ stress was measured close to the fault associated with the 1995 Kobe Earthquake (Hyogo-ken Nanbu earthquake; January 1995; M 7.2) using the hydraulic fracturing method. The measurements were made approximately 2 years after the earthquake. The measured points were approximately 40 m from the fault plane at depths of about 1500 m. The maximum and the minimum horizontal compressive stresses were 45 MPa and 31 MPa, respectively. The maximum compressive stress and the maximum shear stress are very small in comparison with those of other seismically active areas. The azimuth of the maximum horizontal compressive stress was estimated from the observed azimuths of well bore breakouts at depths between 1400 m and 1600 m and was found to be N135° (clockwise). The maximum stress axis is perpendicular to the fault strike, N45°. These features are interpreted in terms of a small frictional coefficient of the fault. The shear stress on the fault was released and dropped almost to zero during the earthquake and it has not yet recovered. Zero shear stress on the fault plane resulted from the perpendicular orientation of one of the principal stress to the fault plane.     

The abundance, composition and sources of marine debris in coastal seawaters or beaches around the northern South China Sea (China)

The abundance and composition of marine debris including floating marine debris (FMD), seafloor marine debris (SMD) and beached marine debris (BMD) were investigated in coastal seawaters/beaches around the northern South China Sea during 2009 and 2010. The FMD density was 4.947 (0.282-16.891) items/km², with plastics (44.9%) and Styrofoam (23.2%) dominating. More than 99.0% of FMD was small or medium size floating marine debris. The SMD and BMD densities of were 0.693 (0.147-5.000) and 32.82 (2.83-375.00) items/km², respectively. SMD was composed of plastics (47.0%), wood (15.2%), fabric/fiber (13.6%) and glass (12.1%), while BMD was composed of plastics (42.0%) and wood (33.7%). More than 90% of FMD, 75% of SMD and 95% of BMD were not ocean-based sources but land-based sources, mostly attributed to coastal/recreational activity, because of the effect of human activities in the areas.     

Modeling of marine litter drift and beaching in the Japan Sea

Characteristics of drift and beaching of floating marine litter in the Japan Sea are examined numerically using the reanalysis data of the Japan Sea Forecasting System of Kyushu University. The residence time of model marine litter deployed uniformly over the surface of the Japan Sea strongly depends on the buoyancy ratio. However, almost all litter beaches or flows out through straits within 3 years. Experiments with inputs of litter imposed at large cities and the Tsushima Straits as well as river basins of the Japan Sea exhibit a good agreement with beach surveys with regard to country ratios of beached litter along the Japanese coast in cases of lighters. In a case of lighter, almost all lighters originating from Japan beach along the Japanese coast, while almost all lighters originating from a country surrounding the Japan Sea except Japan beach along the coast of that country and the Japanese coast.     

An estimate of the suspended particulate matter (SPM) transport in the southern North Sea using SeaWiFS images,in situ measurements and numerical model results

A study is presented where satellite images (SeaWiFS), in situ measurements (tidal cycle and snapshot) and a 2D hydrodynamic numerical model have been combined to calculate the long term SPM (Suspended Particulate Matter) transport through the Dover Strait and in the southern North Sea. The total amount of SPM supplied to the North Sea through the Dover Strait is estimated to be 31.74×10⁶ t. The satellite images provide synoptic views of SPM concentration distribution but do not take away the uncertainty of SPM transport calculation. This is due to the fact that SPM concentration varies as a function of tide, wind, spring-neap tidal cycles and seasons. The short term variations (tidal, spring-neap tidal cycle) have not been found in the satellite images, however seasonal variations are clearly visible. Furthermore the SPM concentration in the satellite images is generally lower than in the in situ measurements. The representativness of SPM concentration maps derived from satellites for calculating long term transports has therefore been investigated by comparing the SPM concentration variability from the in situ measurements with those of the remote sensing data. The most important constraints of satellite images are related to the fact that satellite data is evidence of clear sky conditions, whereas in situ measurements from a vessel can be carried out also during rougher meteorological conditions and that due to the too low time resolution of the satellite images the SPM concentration peaks are often missed. It is underlined that SPM concentration measurements should be carried out during at least one tidal cycle in high turbidity areas to obtain representative values of SPM concentration.     

Evaluation of solid residues removed from a mangrove swamp in the São Vicente Estuary, SP, Brazil

Mangrove swamps are found in estuaries along the coastal plains of tropical regions and have be subjected to heavy occupation and use pressure due to their privileged locations and abundance of biological resources. The present work evaluated the ecological characteristics and solid wastes accumulated in eight areas along the Santos - São Vicente Estuary Complex. The superficially deposited residues at each sampling site were collected and subsequently washed, drained, counted, weighed and separated into classes according to their composition and predominant use. The predominant litter type in terms of density was plastic (62.81%) and, by weight, wood (55.53%). The greatest deposition of residues was associated with areas that were less inclined and that had low plant density levels, indicating that the presence of obstacles was not critical for retaining floating residues in mangrove areas. The presence of the most frequently encountered types of solid waste residues could be explained by local activities.     

SAR偏移量跟踪技术估计天山南依内里切克冰川运动

流动性是冰川的一个主要特征,监测其流速变化可以为冰川物质平衡和冰川灾害研究提供重要信息.本文研究利用2007—2008年的7景ALOS/PALSAR影像和偏移量跟踪技术提取亚洲最大的山岳冰川之一——南伊内里切克冰川的运动场.ALOS/PALSAR影像的时间连续性和南伊内里切克冰川的冰碛覆盖为SAR偏移量跟踪技术获取连续的冰川表面流速提供了基础,然而冰川积累区降雪、附加冰带消融、陡坡区域裂缝发育等客观事件的发生对速度的获取仍有局部影响.尽管如此,本文仍得到了整个冰川不同季节的平面运动场,并且在所有6个时间段内观测到的运动场非常吻合.详细地分析揭示南伊内里切克冰川运动具备以下规律:流速由轴部向两侧递减,由源头向下至雪线处运动速度逐渐增加,然后再向末端逐渐递减;流速大小和坡度大小呈非线性正相关,坡度从1°突变至16°时,冰川运动加速会导致裂缝发育;夏季受冰川湖影响,尾部分支流速能激增至96 cm/d;暖季速度会高于寒季5～10 cm/d.该冰川的冰舌主体日平均速度为20～50 cm/d,局部最高速度可以达到65 cm/d.在冰舌上提取了一些样点的速度作统计,结果显示各个时段中所有样点的平均速度最高可达33.3 cm/d,最低可至27.9 cm/d.冰舌部分的速度和2004年的数据相比下降了约5 cm/d.     

Using a Lagrangian model to estimate source regions of particles in sediment traps

A Lagrangian model is used to evaluate source regions of particles collected in the sediment traps at the DYFAMED(Dynamique des Flux Atmosphériques en Méditerranée) station by tracking particles backwards from March 1 to August 31, 2001. The analysis suggests that source regions depend on the flow fields, the settling speed of the particles, and the deployment depths of the traps. Monthly variation is observed in the distribution patterns of source regions, which is caused by the currents. The source regions are located around the traps and up to hundreds of kilometers away. As the settling speed increases with the particle diameters, the distance to the source regions decreases. The vertical flux can be approximately estimated in 1D for the particles with diameters larger than 500 μm. Furthermore, traps moored at various depths at the DYFAMED can collect particles that originated from different regions in the Ligurian Sea.     

A new laboratory technique for determining the compressional wave properties of marine sediments at sonic frequencies and in situ pressures

We describe a new laboratory technique for measuring the compressional wave velocity and attenuation of jacketed samples of unconsolidated marine sediments within the acoustic (sonic) frequency range 1–10 kHz and at elevated differential (confining – pore) pressures up to 2.413 MPa (350 psi). The method is particularly well suited to attenuation studies because the large sample length (up to 0.6 m long, diameter 0.069 m) is equivalent to about one wavelength, thus giving representative bulk values for heterogeneous samples. Placing a sediment sample in a water‐filled, thick‐walled, stainless steel Pulse Tube causes the spectrum of a broadband acoustic pulse to be modified into a decaying series of maxima and minima, from which the Stoneley and compressional wave, velocity and attenuation of the sample can be determined. Experiments show that PVC and copper jackets have a negligible effect on the measured values of sediment velocity and attenuation, which are accurate to better than ± 1.5% for velocity and up to ± 5% for attenuation. Pulse Tube velocity and attenuation values for sand and silty‐clay samples agree well with published data for similar sediments, adjusted for pressure, temperature, salinity and frequency using standard equations. Attenuation in sand decreases with pressure to small values below Q^?1 = 0.01 (Q greater than 100) for differential pressures over 1.5 MPa, equivalent to sub‐seafloor depths of about 150 m. By contrast, attenuation in silty clay shows little pressure dependence and intermediate Q^?1 values between 0.0206–0.0235 (Q = 49–43). The attenuation results fill a notable gap in the grain size range of published data sets. Overall, we show that the Pulse Tube method gives reliable acoustic velocity and attenuation results for typical marine sediments.     

Dynamics behind warming of the southeastern Arabian Sea and its interruption based on in situ measurements

A study of the inter-annual variability of the warming of the southeastern Arabian Sea (SEAS) during the spring transition months was carried out from 2013 to 2015 based on in situ data from moored buoys. An attempt was made to identify the roles of the different variables in the warming of the SEAS (e.g., net heat flux, advection, entrainment, and thickness of the barrier layer during the previous northeast monsoon season). The intense freshening of the SEAS (approximately 2 PSU) occurring in each December, together with the presence of a downwelling Rossby wave, supports the formation of a thick barrier layer during the northeast monsoon season. It is known that the barrier layer thickness, varying each year, plays a major role in the spring warming of the SEAS. Interestingly, an anomalously thick barrier layer occurred during the northeast monsoon season of 2012–2013. However, the highest sea surface temperature (31 °C) was recorded during the last week of April 2015, while the lowest sea surface temperature (29.7 °C) was recorded during the last week of May 2013. The mixed layer heat budget analysis during the spring transition months proved that the intense warming has been mainly supported by the net heat flux, not by other factors like advection and entrainment. The inter-annual variability analysis of the net heat flux and its components, averaged over a box region of the SEAS, showed a substantial latent heat flux release and a reduction in net shortwave radiation in 2013. Both factors contributed to the negative net heat flux. Strong breaks in the warming were also observed in May due to the entrainment of cold sub-surface waters. These events are associated with the cyclonic eddy persisting over the SEAS during the same time. The entrainment term, favoring the cooling, was stronger in 2015 than that in 2013 and 2014. The surface temperatures measured in 2013 were lower than those in 2014 and 2015 despite the presence of a thick barrier layer. The substantial decrease in net heat flux along with entrainment cooling has been identified as causes for this behavior.     

Using in situ cosmogenic 10Be to identify the source of sediment leaving Greenland

We use the concentration of in situ ¹⁰Be in quartz isolated from fluvial and morainal sand to trace sediment sources and to determine the relative contribution of glacerized and deglaciated terrain to Greenland's sediment budget. We sampled along the western, eastern, and southern margins of the Greenland Ice Sheet, and collected sediment sourced from glacerized (n = 19) and non‐glacerized terrain (n = 10), from channels where sediment from glacerized and non‐glacerized terrain is mixed (n = 28), from Holocene glacial‐fluvial terraces (n = 4), and from one sand dune. In situ ¹⁰Be concentrations in sediment range from 1600 to 34 000 atoms g^‐1. The concentration of in situ ¹⁰Be in sediment sourced from non‐glacerized terrain is significantly higher than in sediment sourced from glacerized areas, in mixed channel sediment, and in terrace sediment that was deposited during the Holocene. To constrain the timing of landscape exposure for the deglaciated portion of the Narsarsuaq field area in southern Greenland, we measured in situ ¹⁰Be concentration in bedrock (n = 5) and boulder (n = 6) samples. Paired bedrock and boulder ages are indistinguishable at 1σ uncertainty and indicate rapid exposure of the upland slopes at ~10.5 ka. The isotope concentration in sediment sourced from non‐glacerized terrain is higher than in sediment sourced from glacerized terrain because the non‐glacerized landscape has been exposed to cosmic radiation since early Holocene deglaciation. Sediment from glacerized areas contains a low, but measurable concentration of ¹⁰Be that probably accumulated at depth during a prolonged period of exposure, probably before the establishment of the Greenland Ice Sheet. The concentration of ¹⁰Be in mixed fluvial sediment and in terrace sediment is low, and similar to the concentration in sediment from glacerized areas, which indicates that the Greenland Ice Sheet is the dominant source of sediment moving through the landscape outside the glacial margin in the areas we sampled. Copyright © 2014 John Wiley & Sons, Ltd.