Sigmoidal inclusion trails, punctuated fabric development, and interactions between metamorphism and deformation

Porphyroblast inclusion fabrics are consistent in style and geometry across three Proterozoic metamorphic field gradients, comprising two pluton-related gradients in central Arizona and one regional gradient in northern New Mexico. Garnet crystals contain curved ‘sigmoidal’ inclusion trails. In low-grade chlorite schists, these trails can be correlated directly with matrix crenulations of an older schistosity (S1). The garnet crystals preferentially grew in crenulation hinges, but some late crenulations nucleated on existing garnet porphyroblasts. At higher grade, biotite, staurolite and andalusite porphyroblasts occur in a homogeneous S2 foliation primarily defined by matrix biotite and ilmenite. Biotite porphyroblasts have straight to sigmoidal inclusion trails that also represent the weakly folded S1 schistosity. Staurolite and andalusite contain distinctive inclusion-rich and inclusion-poor domains that represent a relict S2 differentiated crenulation cleavage. Together, the inclusion relationships document the progressive development of the S2 fabric through six stages. Garnet and biotite porphyroblasts contain stage 2 or 3 crenulations; staurolite and andalusite generally contain stage 4 crenulations, and the matrix typically contains a homogeneous stage 6 cleavage. The similarity of inclusion relationships across spatially and temporally distinct metamorphic field gradients of widely differing scales suggests a fundamental link between metamorphism and deformation. Three end-member relationships may be involved: (1) tectonic linkages, where similar P-T-time histories and similar bulk compositions combine to produce similar metamorphic and structural signatures; (2) deformation-controlled linkages, where certain microstructures, particularly crenulation hinges, are favourable environments for the nucleation and/or growth of porphyroblasts; and (3) reaction-controlled linkages, where metamorphic reactions, particularly dehydration reactions, are associated with an increase in the rate of fabric development. A general model is proposed in which (1) garnet and biotite porphyroblasts preferentially grow in stage 2 or 3 crenulation hinges, and (2) chlorite-consuming metamorphic reactions lead to pulses in the rate of fabric evolution. The data suggest that fabric development and porphyroblast growth may have been quite rapid, of the order of several hundreds of thousands of years, in these rocks. These microstructures and processes may be characteristic of low-pressure, first-cycle metamorphic belts.     

Microstructural analysis of the classical spiral garnet porphyroblasts of south-east Vermont: evidence for non-rotation

New data strongly suggest that the classical spiral garnet porphyroblasts of south-east Vermont, USA, generally did not rotate, relative to geographical coordinates, throughout several stages of non-coaxial ductile deformation. The continuity of inclusion trails (S_i) in these porphyroblasts is commonly disrupted by planar to weakly arcuate discontinuities, consisting of truncations and differentiation zones where quartz–graphite S_i bend sharply into more graphitic S_i. Discontinuous, tight microfold hinges with relatively straight axial planes are also present. These microstructures form part of a complete morphological gradation between near-orthogonally arranged, discontinuous inclusion segments and smoothly curving, continuous S_i spirals. Some 2700 pitch measurements of well-developed inclusion discontinuities and discontinuous microfold axial planes were taken from several hundred vertically orientated thin sections of various strike, from specimens collected at 28 different locations around the Chester and Athens domes. The results indicate that the discontinuities have predominantly subvertical and subhorizontal orientations, irrespective of variations in the external foliation attitude, macrostructural geometry and apparent porphyroblast-matrix rotation angles. Combined with evidence for textural zoning, this supports the recent hypothesis that porphyroblasts grow incrementally during successive cycles of subvertical and subhorizontal crenulation cleavage development. Less common inclined discontinuities are interpreted as resulting from deflection of anastomosing matrix foliations around obliquely orientated crystal faces prior to inclusion. Most of the idioblastic garnet porphyroblasts have a preferred crystallographic orientation. Dimensionally elongate idioblasts also have a preferred shape orientation, with long axes orientated normal to the mica folia, within which epitaxial nucleation occurred. Truncations and differentiation zones result from the formation of differentiated crenulation cleavage seams against porphyroblast margins, in association with progressive and selective strain-induced dissolution of matrix minerals and locally also the porphyroblast margin. Non-rotation of porphyroblasts, relative to geographical coordinates, suggests that deformation at the microscale is heterogeneous and discontinuous in the presence of undeformed, relatively large and rigid heterogeneities, which cause the progressive shearing (rotational) component of deformation to partition around them. The spiral garnet porphyroblasts therefore preserve the most complete record of the complex, polyphase tectonic and metamorphic history experienced in this area, most of which was destroyed in the matrix by progressive foliation rotation and reactivation, together with recrystallization.     

The drawbacks of sectioning rocks relative to fabric orientations in the matrix: A case study from the Robertson River Metamorphics (Northern Queensland, Australia)

Understanding the relationships of inclusion trail geometries in porphyroblasts relative to matrix foliations is vital for unravelling complex deformation and metamorphic histories in highly tectonized terranes and the approach used to thin sectioning rocks is critically important for this. Two approaches have been used by structural and metamorphic geologists. One is based on fabric orientations with sections cut perpendicular to the foliation both parallel (P) and normal (N) to the lineation, whereas the other uses geographic orientations and a series of vertical thin sections. Studies using P and N sections reveal a simple history in comparison with studies using multiple-vertical thin sections. The reason for this is that inclusion trails exiting the porphyroblasts into the strain shadows in P and N sections commonly appear continuous with the matrix foliation whereas multiple vertical thin sections with different strikes reveal that they are actually truncated. Such truncations or textural unconformities are apparent from microstructures, textural relationships, compositional variations and FIA (foliation intersection axis) trends. A succession of four FIA trends from ENE–WSW, E–W, N–S to NE–SW in the Robertson River Metamorphics, northern Queensland, Australia, suggests that these truncations were formed because of the overprint of successive generations of orthogonal foliations preserved within porphyroblasts by growth during multiple deformation events. At least four periods of orogenesis involving multiple phases of porphyroblast growth can be delineated instead of just the one previously suggested from an N and P section approach.     

Growth and deformation of porphyroblasts in the Foothills terrane, central Sierra Nevada, California: negotiating a microstructural minefield

Abstract The main porphyroblastic minerals in schists and phyllites of the Foothills terrane, Western Metamorphic Belt, central Sierra Nevada, California, are cordierite and andalusite (mostly chiastolite). Less commonly, biotite, muscovite, chlorite, garnet or staurolite are also present as porphyroblasts. The variety of porphyroblast and matrix microstructures in these rocks makes them suitable for testing three modern hypotheses on growth and deformation of porphyroblasts: (1) porphyroblast growth is always syndeformational; (2) porphyroblasts nucleate only in low-strain, largely coaxially deformed, quartz-rich (Q) domains of a crenulation foliation and are dissolved in active high-strain, non-coaxially deformed, mica-rich (M) domains, the spacing between which limits the size of the porphyroblasts; and (3) porphyroblasts generally do not rotate, with respect to geographical coordinates, during deformation, provided they do not deform internally, so that they may be used as reliable indicators of the orientation of former regional structural surfaces, even on the scale of orogenic belts. Some porphyroblast–matrix relationships in the Foothills terrane are inconsistent with hypotheses 1 and 2, and others are equivocal. For example, in many rocks it cannot be determined whether the porphyroblasts grew where the strain had already been partitioned into M and Q domains, whether the porphyroblasts caused this partitioning, or both. Although most porphyroblasts appear to be syndeformational, as predicted by hypothesis 1, observations that do not support the general application of hypotheses 1 and 2 to rocks of the Foothills terrane include: (a) lack of residual crenulations in many strain-shadows and alternative explanations where they are present; (b) absence of porphyroblasts smaller than the distance between nearest mica-rich domains; (c) nucleation of crenulations on existing porphyroblasts, rather than nucleation of porphyroblasts between existing crenulations; (d) presence of micaceous ‘arcs’in an undifferentiated matrix against some porphyroblasts, suggesting static growth; (e) absence of crenulations in porphyroblastic rocks showing sedimentary bedding; and (f) porphyroblasts with very small, random inclusions, which are probably pre-deformational. Similarly, porphyroblasts that have overgrown sets of crenulations and porphyroblasts with micaceous ‘arcs’are probably post-deformational, at least on the scale of a large thin section and probably over much larger areas, judging from mesoscopic structural evidence. Some porphyroblasts in rocks of the Foothills terrane do not appear to have rotated, with respect to geographical coordinates, during matrix deformation, in accordance with hypothesis 3, at least on the scale of a large thin section. However, other porphyroblasts evidently have rotated. In some instances, this appears to be due to mutual interference, but many apparently rotational porphyroblasts are too far apart to have interfered with each other, which indicates that the rotation was associated with deformation of the matrix. The occurrence of planar bedding surfaces adjacent to porphyroblasts about which bedding and/or foliation surfaces are folded suggests rotation of the porphyroblasts during non-coaxial flow parallel to bedding, rather than crenulation of the matrix foliation around static porphyroblasts. It appears that porphyroblasts may rotate during deformation if the matrix is relatively homogeneous, so that the strain is effectively non-coaxial. This may occur after homogenization of a matrix in response to the strongest degree of crenulation folding, whereas the same porphyroblasts may have been inhibited from rotating previously, when strain accumulation was partitioned in the matrix.     

Deformation partitioning and porphyroblast rotation in meta-morphic rocks: a radical reinterpretation

Abstract Most porphyroblasts never rotate during ductile deformation, provided they do not internally deform during subsequent events, with the exception of relatively uncommon but spectacular examples of spiralling garnets. Instead, the surrounding foliation rotates and reactivates due to partitioning of the deformation around the porphyroblast. Consequently, porphyroblasts commonly preserve the orientation of early foliations and stretching lineations within strain shadows or inclusion trails, even where these structures have been rotated or obliterated in the matrix due to subsequent deformation. These relationships can be readily used to help develop an understanding of the processes of foliation development and they demonstrate the prominent role of reactivation of old foliations during subsequent deformation. They can also be used to determine the deformation history, as porphyroblasts only rotate when the deformation cannot partition and involves progressive shearing with no combined bulk shortening component.     

Lack of porphyroblast rotation in the Otago schists, New Zealand: implications for crenulation cleavage development, folding and deformation partitioning

Porphyroblasts of garnet and plagioclase in the Otago schists have not rotated relative to geographic coordinates during non-coaxial deformation that post-dates their growth. Inclusion trails in most of the porphyroblasts are oriented near-vertical and near-horizontal, and the strike of near-vertical inclusion trails is consistent over 3000 km². Microstructural relationships indicate that the porphyroblasts grew in zones of progressive shortening strain, and that the sense of shear affecting the geometry of porphyroblast inclusion trails on the long limbs of folds is the same as the bulk sense of displacement of fold closures. This is contrary to the sense of shear inferred when porphyroblasts are interpreted as having rotated during folding.
Several crenulation cleavage/fold models have previously been developed to accommodate the apparent sense of rotation of porphyroblasts that grew during folding. In the light of accumulating evidence that porphyroblasts do not generally rotate, the applicability of these models to deformed rocks is questionable.
Whether or not porphyroblasts rotate depends on how deformation is partitioned. Lack of rotation requires that progressive shearing strain (rotational deformation) be partitioned around rigid heterogeneities, such as porphyroblasts, which occupy zones of progressive shortening or no strain (non-rotational deformation). Therefore, processes operating at the porphyroblast/matrix boundary are important considerations. Five qualitative models are presented that accommodate stress and strain energy at the boundary without rotating the porphyroblast: (a) a thin layer of fluid at the porphyroblast boundary; (2) grain-boundary sliding; (3) a locked porphyroblast/matrix boundary; (4) dissolution at the porphyroblast/matrix boundary, and (5) an ellipsoidal porphyroblast/shadow unit.     

Porphyroblast rotation during crenulation cleavage development: an example from the aureole of the Mooselookmeguntic pluton, Maine, USA

In the low‐pressure, high‐temperature metamorphic rocks of western Maine, USA, staurolite porphyroblasts grew at c. 400 Ma, very late during the regional orogenesis. These porphyroblasts, which preserve straight inclusion trails with small thin‐section‐scale variation in pitch, were subsequently involved in the strain and metamorphic aureole of the c. 370 Ma Mooselookmeguntic pluton. The aureole shows a progressive fabric intensity gradient from effectively zero emplacement‐related deformation at the outer edge of the aureole ～2900 m (map distance) from the pluton margin to the development of a pervasive emplacement‐related foliation adjacent to the pluton. The development of this pervasive foliation spanned all stages of crenulation cleavage development, which are preserved at different distances from the pluton. The spread of inclusion‐trail pitches in the staurolite porphyroblasts, as measured in two‐dimensional (2‐D) thin sections, increases nonlinearly from ～16° to 75° with increasing strain in the aureole. These data provide clear evidence for rotation of the staurolite porphyroblasts relative to one another and to the developing crenulation cleavage. The data spread is qualitatively modelled for both pure and simple shear, and both solutions match the data reasonably well. The spread of inclusion‐trail orientations (40–75°) in the moderately to highly strained rocks is similar to the spread reported in several previous studies. We consider it likely that the sample‐scale spread in these previous studies is also the result of porphyroblast rotation relative to one another. However, the average inclusion‐trail orientation for a single sample may, in at least some instances, reflect the original orientation of the overgrown foliation.     

Foliation development and refraction in metamorphic rocks: reactivation of earlier foliations and decrenulation due to shifting patterns of deformation partitioning

Abstract Reactivation of early foliations accounts for much of the progressive strain at more advanced stages of deformation. Its role has generally been insufficiently emphasized because evidence is best preserved where porphyroblasts which contain inclusion trails are present. Reactivation occurs when progressive shearing, operating in a synthetic anastomosing fashion parallel to the axial planes of folds, changes to a combination of coarse- and finescale zones of progressive shearing, some of which operate antithetically relative to the bulk shear on a fold limb. Reactivation of earlier foliations occurs in these latter zones. Reactivation decrenulates pre-existing or just-formed crenulations, generating shearing along the decrenulated or rotated pre-existing foliation planes. Partitioning of deformation within these foliation planes, such that phyllosilicates and/or graphite take up progressive shearing strain and other minerals accommodate progressive shortening strain, causes dissolution of these other minerals. This results in concentration of the phyllosilicates in a similar, but more penetrative manner to the formation of a differentiated crenulation cleavage, except that the foliation can form or intensify on a fold limb at a considerable angle to the axial plane of synchronous macroscopic folds. Reactivation can generate bedding-parallel schistosity in multideformed and metamorphosed terrains without associated folds. Heterogeneous reactivation of bedding generates rootless intrafolial folds with sigmoidal axial planes from formerly through-going structures. Reactivation causes rotation or ‘refraction’of axial-plane foliations (forming in the same deformation event causing reactivation) in those beds or zones in which an earlier foliation has been reactivated, and results in destruction of the originally axial-plane foliation at high strains. Reactivation also provides a simple explanation for the apparently ‘wrong sense’, but normally observed ‘rotation’of garnet porphyroblasts, whereby the external foliation has undergone rotation due to antithetic shear on the reactivated foliation. Alternatively, the rotation of the external foliation can be due to its reactivation in a subsequent deformation event. Porphyroblasts with inclusion trails commonly preserve evidence of reactivation of earlier foliations and therefore can be used to identify the presence of a deformation that has not been recognized by normal geometric methods, because of penetrative reactivation. Reactivation often reverses the asymmetry between pre-existing foliations and bedding on one limb of a later fold, leading to problems in the geometric analysis of an area when the location of early fold hinges is essential. The stretching lineation in a reactivated foliation can be radically reoriented, potentially causing major errors in determining movement directions in mylonitic schistosities in folded thrusts. Geometric relationships which result from reactivation of foliations around porphyroblasts can be used to aid determination of the timing of the growth of porphyroblasts relative to deformation events. Other aspects of reactivation, however, can lead to complications in timing of porphyroblast growth if the presence of this phenomenon is not recognized; for example, D₂-grown porphyroblasts may be dissolved against reactivated S₁ and hence appear to have grown syn-D₁.     

变质岩中变斑晶成核生长及旋转问题的述评

发生递进变形的变质岩中,斑晶成核生长于变形分解作用的递进缩短带内,斑晶的大小受两侧递进剪切变形带的限制。除少数螺旋状石榴石外,产于共轴或非共轴递进不均匀缩短变形过程中的斑晶不发生旋转,斑晶内部包体形迹(Si)反映外部面理(Se)的再活化。利用未旋转斑晶中的包体形迹可以确定早期面理的取向,寻找构造演化的时间标志,确定褶皱轴迹等,本文给出了斑晶中包体形迹弯曲的成因模式图。     

Spiral and staircase inclusion trail axes within garnet and staurolite porphyroblasts from schists of the Bolton Syncline, Connecticut: timing of porphyroblast growth and the effects of fold development

In the Littleton Formation, garnet porphyroblasts preserve three generations of growth that occurred before formation of the Bolton Syncline. Inclusion trails of foliations overgrown by these porphyroblasts are always truncated by the matrix foliation suggesting that garnet growth predated the matrix foliation. In contrast, many staurolite porphyroblasts grew synchronously with formation of the Bolton Syncline. However, local rim overgrowths of the matrix foliation suggest that some staurolite porphyroblasts continued to grow after development of the fold during younger crenulation producing deformations. The axes of curvature or intersection of foliations defined by inclusion trails inside the garnet porphyroblasts lie oblique to the axial plane of the Bolton Syncline but do not change orientation across it. This suggests the garnets were not rotated during the subsequent deformation associated with fold development or during even younger crenulation events. Three samples also contain a different set of axes defined by curvature of inclusion trails in the cores of garnet porphyroblasts suggesting a protracted history of garnet growth. Foliation intersection axes in staurolite porphyroblasts are consistently orientated close to the trend of the axial plane of the Bolton Syncline on both limbs of the fold. In contrast, axes defined by curvature or intersection of foliations in the rims of staurolite porphyroblasts in two samples exhibit a different trend. This phase of staurolite growth is associated with a crenulation producing deformation that postdated formation of the Bolton Syncline. Measurement of foliation intersection axes defined by inclusion trails in both garnet and staurolite porphyroblasts has enabled the timing of growth relative to one another and to the development of the Bolton Syncline to be distinguished in rocks where other approaches have not been successful. Consistent orientation of foliation intersection axes across a range of younger structures suggests that the porphyroblasts did not rotate relative to geographical coordinates during subsequent ductile deformation. Foliation intersection axes in porphyroblasts are thus useful for correlating phases of porphyroblastic growth in this region.     

剪切带中变斑晶的生长及包裹体痕迹的演化

韧性剪切带中,由于变形分解作用的存在,岩石发生递进变形过程中,产于共轴或非共轴递进缩短带内的变斑晶不发生旋转,而变斑晶内的包裹体痕迹是递进变形过程中遗留在变斑晶内的变形变质痕迹。利用未旋转斑晶中的包裹体痕迹可以确定早期面理的取向,寻找构造演化的时间标志,确定变形变质的关系及其演化史。对北祁连托勒牧场大型走滑韧性剪切带中石榴石、黑云母等变斑晶及包裹体痕迹的研究,揭示了变斑晶的生长和包、裹体痕迹与褶劈理的演化有着重要联系以及剪切变形过程中变形变质演化史、应变速率的变化。递进变形相应地发生递增变质,但两者存在着一定的差异性。     

Garnet porphyroblast timing and behaviour during fold evolution: implications from a 3-D geometric analysis of a hand-sample scale fold in a schist

Detailed 3‐D analysis of inclusion trails in garnet porphyroblasts and matrix foliations preserved around a hand‐sample scale, tight, upright fold has revealed a complex deformation history. The fold, dominated by interlayered quartz–mica schist and quartz‐rich veins, preserves a crenulation cleavage that has a synthetic bulk shear sense to that of the macroscopic fold and transects the axis in mica‐rich layers. Garnet porphyroblasts with asymmetric inclusion trails occur on both limbs of the fold and display two stages of growth shown by textural discontinuities. Garnet porphyroblast cores and rims pre‐date the macroscopic fold and preserve successive foliation inflection/intersection axes (FIAs), which have the same trend but opposing plunges on each limb of the fold, and trend NNE–SSW and NE–SW, respectively. The FIAs are oblique to the main fold, which plunges gently to the WSW. Inclusion trail surfaces in the cores of idioblastic porphyroblasts within mica‐rich layers define an apparent fold with an axis oblique to the macroscopic fold axis by 32°, whereas equivalent surfaces in tabular garnet adjacent to quartz‐rich layers define a tighter apparent fold with an axis oblique to the main fold axis by 17°. This potentially could be explained by garnet porphyroblasts that grew over a pre‐existing gentle fold and did not rotate during fold formation, but is more easily explained by rotation of the porphyroblasts during folding. Tabular porphyroblasts adjacent to quartz‐rich layers rotated more relative to the fold axis than those within mica‐rich layers due to less effective deformation partitioning around the porphyroblasts and through quartz‐rich layers. This work highlights the importance of 3‐D geometry and relative timing relationships in studies of inclusion trails in porphyroblasts and microstructures in the matrix.     

Stepping stones and pitfalls in the determination of an anticlockwise P-T-t-deformation path: the low-P, high-T Cooma Complex, Australia

Abstract Low-pressure/high-temperature (low-P/high-T) metamorphic rocks of the Cooma Complex, southeastern Australia, show evidence of an anticlockwise pressure-temperature-time-deformation (P-T-t-D) path, similar to those of some other low-P/high-T metamorphic areas of Australia. Prograde paths are reasonably well constrained in cordierite-andalusite schists, cordierite-K-feldspar gneisses and andalusite-K-feldspar gneisses. These paths are inferred to be convex to the temperature axis, involving increase in pressure with increase in temperature. Evidence of the retrograde path is inconclusive, but is consistent with approximately isobaric cooling, as are available isotopic data on the Cooma Granodiorite, which indicate initially rapid cooling following attainment of peak temperatures. The retrograde path is inconsistent with either a clockwise P-T-t-D path involving rapid or even moderate decompression immediately post-dating the peak of metamorphism, or a path in which the retrograde component simply reverses the prograde component, because both these paths should cross reactions forming cordierite from aluminosilicate, for which no evidence has been observed. Determination of the deformational-metamorphic history of the complex is not straightfoward and depends on careful examination of critical samples. Evidence necessary for successful elucidation of the prograde, and part of the retrograde, deformational-metamorphic history in the Cooma Complex includes: (1) sequentially grown porphyroblasts that can be timed relative to surrounding foliations; (2) partial replacement microstructures providing relative timing of metamorphic reactions that cannot be timed relative to foliation development; (3) a tectonic marker foliation (S4 at Cooma) that allows correlation of foliations from one location to another; and (4) single samples containing all of the foliations and all generations of porphyroblast growth within a single metamorphic zone. The latest two or three foliations involve low strain accumulation, allowing relative timing relationships between foliations and porphyroblasts to be more clearly determined. Sequential porphyroblast growth and foliation development in the cordierite-andalusite schists is examined for situations involving rotation and non-rotation of porphyroblasts relative to geographically fixed coordinates. Although the number of foliations developed varies in the rotational situation, depending on the deformation history proposed, the sequential order of porphyroblast growths does not differ from the non-rotational situation. Thus, whether or not porphyroblasts rotated in the Cooma rocks, the sequence of reactions, and therefore P-T-t paths inferred from the relative timing of porphyroblast growths, remain the same, for the deformational histories evaluated.     

Progressive metamorphism in a crustal-scale shear zone: an example from the Léon region, north-west Brittany, France

This paper describes the progressive metamorphism and deformation of a series of metasediments, Le Conquet Schists and their higher grade equivalents, which occur as tectonically emplaced screens within a sequence of foliated gneisses, the Gneiss de Brest and Gneiss de Lesneven. The sequence exhibits a steep south to north increase in metamorphic grade from garnet-staurolite schist to sillimanite gneiss and sillimanite-K-feldspar migmatite. The relationship of mineral growth to foliation development has been established for individual screens. At least five phases of deformation (D1-D5) are preserved. Analysis of porphyroblast inclusion trails is used to demonstrate sequential mineral growth during the successive development of orthogonal foliations S1-S4. Porphyroblasts continued to grow during the subsequent development of C-S mylonite fabrics and extensional crenulation cleavages which are genetically related to a series of high-strain zones (D5). Mineral assemblages, phase relations and mineral chemistry are consistent with porphyroblast growth being the result of continuous reactions. Microstructure-porphyroblast relations are used to show that although mineral growth proceeded during continuous reactions, these only operated episodically. Phase relations, mineral chemistry and P-T estimates are used to constrain P-T trajectories and these are linked to the deformation histories within individual screens. A comparison between the resulting pressure-temperature-deformation paths is used to demonstrate that the metamorphic peak occurred progressively later and at successively lower pressures with increasing metamorphic grade. It is suggested that the early evolution of the belt is the result of crustal thickening by overthrusting. The subsequent history is one of progressive heating and unroofing of the higher grade rocks in a dextral strike-slip transtensional shear zone.     

Microstructure,metamorphism, thermochronology and P-T-t-deformation history of the Port aux Basques gneisses,south-west Newfoundland,Canada*

Abstract The Port aux Basques gneisses comprise three lithostratigraphic units separated by major fault zones: the Grand Bay Complex; the Port aux Basques Complex; and the Harbor le Cou Group. A similar regionally developed polyphase history of penetrative deformation characterizes each of these units. Thickening during D1 produced rare recumbent folds (F1) and an axial planar schistosity (S1), overprinted by D2 recumbent folds (F2), and transposed during development of a locally penetrative, differentiated crenulation cleavage (S2). In western sectors of the area, D2 was associated with NW-directed reverse shearing. The NE-trending structural grain reflects D3 transpression, partitioned into dextral transcurrent movement along major shear zones and development of upright-to-steeply inclined, periclinal folds (F3) and a variably penetrative schistosity (S3). Amphibolite facies metamorphism increases in grade from west to east across the area. Microstructures, including porphyroblast-matrix foliation relations and internal textural unconformities in garnet, indicate episodic porphyroblast nucleation and growth, which reflect a prograde traverse sequentially across univariant reactions during syntectonic metamorphism. Garnet, kyanite and staurolite porphyroblasts are wrapped by the S2 foliation, but each may contain trails of inclusions that define S1; commonly these trails preserve early stages of S2 crenulation cleavage development. Progressive and sequential reaction out of kyanite, staurolite and muscovite in favour of sillimanite, garnet, biotite and K-feldspar, and the development of an increasing volume of anatectic migmatite in south-eastern sectors of the area record syn- to late-D2 peak metamorphic conditions. Microstructural relationships and petrogenetic grid considerations indicate clockwise trajectories in P-T space for units of the Port aux Basques gneisses. Peak metamorphic conditions are estimated to have been 620–650° C at ≤8kbar in the west and 700–750° C at ≤8 kbar in the east. Titanite from an upper amphibolite facies calc-silicate gneiss yields U-Pb ages of c. 420 Ma, interpreted to date cooling shortly after the thermal peak in these gneisses. Variable D3 strain was associated with some recrystallization of hornblende and micas. ⁴⁰Ar/³⁹Ar hornblende plateau isotope correlation ages range from c. 419 to c. 393 Ma, from east to west across the area, and are interpreted to record cooling through c. 500° C coeval with or soon after D3 deformation. The range in ages may record the effects of heterogeneous D3 deformation and differential uplift from south-east to north-west associated with displacement on major shear zones. ⁴⁰Ar/³⁹Ar muscovite plateau ages cluster at c. 390 Ma, and date cooling through c. 375° C during regional exhumation. Cooling rates are moderate to fast and may indicate a component of tectonic exhumation. The Port aux Basques gneisses are a product of Silurian collisional tectonics. The higher grade of metamorphism in comparison with adjacent areas of the Canadian Appalachians is interpreted to reflect greater thickening due to juxtaposition of the St Lawrence promontory (Laurentian margin) with the Cabot promontory (Avalonian margin) during closure of the Iapetus Ocean.     

Porphyroblast inclusion trails: the key to orogenesis

Detailed microstructural analysis of inclusion trails in hundreds of garnet porphyroblasts from rocks where spiral-shaped inclusion trails are common indicates that spiral-shaped trails did not form by rotation of the growing porphyroblasts relative to geographic coordinates. They formed instead by progressive growth by porphyroblasts over several sets of near-orthogonal foliations that successively overprint one another. The orientations of these near-orthogonal foliations are alternately near-vertical and near-horizontal in all porphyroblasts examined. This provides very strong evidence for lack of porphyroblast rotation.
The deformation path recorded by these porphyroblasts indicates that the process of orogenesis involves a multiply repeated two-stage cycle of: (1) crustal shortening and thickening, with the development of a near-vertical foliation with a steep stretching lineation; followed by (2) gravitational instability and collapse of this uplifted pile with the development of a near-horizontal foliation, gravitational spreading, near-coaxial vertical shortening and consequent thrusting on the orogen margins. Correlation of inclusion trail overprinting relationships and asymmetry in porphyroblasts with foliation overprinting relationships observed in the field allows determination of where the rocks studied lie and have moved within an orogen. This information, combined with information about chemical zoning in porphyroblasts, provides details about the structural/metamorphic ( P-T-t ) paths the rocks have followed.
The ductile deformation environment in which a porphyroblast can rotate relative to geographic coordinates during orogenesis is spatially restricted in continental crust to vertical, ductile tear/transcurrent faults across which there is no component of bulk shortening or transpression.     

递增变质作用中变斑晶形成的时间标志——兼论阿尔泰地区变质带形成顺序

根据变质构造和镜下显微组构的研究,提出了与Zwart,H.J.(1962,1963)的变斑晶包体S形构造成因观点不同的解释。结合包体和基质矿物成分、组构特征建立了递增变质作用中变斑状特征变质矿物形成的相对时间标志。以此确定了阿尔泰变质地带递增变质作用过程中一系列特征变质矿物及其相应的变质带的形成顺序。     

Timing of porphyroblast growth in the Fleur de Lys Supergroup, Newfoundland

Abstract In the Fleur de Lys Supergroup, western Newfoundland, inclusion trails in garnet and albite porphyroblasts indicate that porphyroblasts overgrew a crenulation foliation, without rotation, probably during the deformation event that produced the crenulations. Further deformation of the matrix resulted in strong re-orientation and retrograde metamorphism of the matrix foliation, which is consequently highly oblique to the crenulation foliation preserved in the porphyroblasts. The resulting matrix foliation locally preserves relics of the early crenulations, and also has itself been crenulated later in places. Thus the porphyroblasts grew before the later stages of deformation, rather than during the final stage, as had been suggested previously. The new interpretation is consistent with available ⁴⁰Ar/³⁹Ar cooling ages which indicate a late Ordovician-early Silurian metamorphic peak, rather than the Devonian peak suggested by previous workers. The inclusion patterns and microprobe data indicate normal outward growth of garnet porphyroblasts from a central nucleus, rather than as a series of veins as proposed by de Wit (1976a, b). However, the observations presented here support growth of porphyroblasts without rotation, which is implied by the de Wit model.     

Complex microstructures preserved in rocks with a simple matrix: significance for deformation and metamorphic processes

Schists from the foothills of the Central Sierra Nevada contain one dominant matrix foliation and yet four phases of growth of both cordierite and andalusite porphyroblasts can be distinguished. These occurred early during four separate deformation events that formed successive steep and shallow foliations. A fifth deformation event pre-dates the growth of all porphyroblasts studied. The multiple phases of porphyroblast growth allow correlation of structures across and along the region. A repeated pattern of deformation, in terms of the curvature of earlier foliations against the overprinting one, allows samples containing porphyroblasts with simpler inclusion trail geometries to be interpreted with confidence. The large-scale fold structures in this region formed before or during the second of the five deformation events recorded by the porphyroblasts. However, the matrix foliation is predominantly a product of the fourth deformation, which has commonly reactivated or re-used older foliations, and is dominated by east-side-up shear. The intervening third deformation produced locally intense foliations and was accompanied by top-to-the-east shear. The very weak fifth deformation produced weak crenulations with subhorizontal axial planes and was coaxial. Multiple phases of episodic but synchronous growth of cordierite and andalusite were produced by the KFMASH univariant equilibrium Ms+Chl+Qtz=And+Crd+Bt+H₂O. The rocks crossed this reaction at a pressure just below the intersection with the KFMASH divariant equilibrium Ms+Chl+Qtz=Crd+Bt+H₂O; the latter being overstepped in favour of the former as there is no evidence for cordierite growth prior to andalusite in these rocks. Subsequent multiple episodes of synchronous growth of cordierite and andalusite indicate that the possible variation in P–T during subsequent deformations was not large. This requires the high-amplitude macroscopic fold to form prior to porphyroblast growth and then be simply tightened and modified by the younger deformations.     

How useful are ‘millipede’ and other similar porphyroblast microstructures for determining synmetamorphic deformation histories?

ABSTRACT Oppositely concave microfolds (OCMs) in and adjacent to porphyroblasts can be classified into five nongenetic types. Type 1 OCMs are found in sections through porphyroblasts with spiral-shaped inclusion trails cut parallel to the spiral axes, and commonly show closed foliation loops. Type 2 OCMs, commonly referred to as ‘millipede’ microstructure, are highly symmetrical, the foliation folded into OCMs being approximately perpendicular to the overprinting foliation. Type 3 OCMs are similar to Type 2, but are asymmetrical, the foliation folded into OCMs being variably oblique to the overprinting foliation. Type 4 OCMs are highly asymmetrical, only one foliation is present, and this foliation is parallel to the local shear plane. Type 5 OCMs result from porphyroblast growth over a microfold interference pattern. Types 1 and 2 are commonly interpreted as indicating highly noncoaxial and highly coaxial bulk deformation paths, respectively, during porphyroblast growth. However, theoretically they can form by any deformation path intermediate between bulk coaxial shortening and bulk simple shearing. Given particular initial foliation orientation and timing of porphyroblast growth, Type 3 OCMs can also form during these intermediate deformation paths, and are commonly found in the same rocks as Type 2 OCMs. Type 4 OCMs may indicate highly noncoaxial deformation during porphyroblast growth, but may be difficult to distinguish from Type 3 OCMs. Thus, Types 1–3 (and possibly 4) reflect the finite strain state, giving no information about the rotational component of the deformation(s) responsible for their formation. Furthermore, there is a lack of unequivocal independent evidence for the degree of noncoaxiality of deformation (s) during the growth of porphyroblasts containing OCMs. Type 2 OCMs that occur independently of porphyroblasts or other rigid objects might indicate highly coaxial bulk shortening, but there is a lack of supporting physical or computer modelling. It is possible that microstructures in the matrix around OCMs formed during highly noncoaxial and highly coaxial deformation histories might have specific characteristics that allow them to be distinguished from one another. However, determining degrees of noncoaxiality from rock fabrics is a major, longstanding problem in structural geology.