Mechanism of mineralization in the Changjiang uranium ore field,South China: Evidence from fluid inclusions,hydrothermal alteration,and H–O isotopes

The Changjiang uranium ore field, which contains >10,000 tonnes of recoverable U with a grade of 0.1–0.5%, is hosted by Triassic two-mica and Jurassic biotite granites, and is one of the most important uranium ore fields in South China. The minerals associated with alteration and mineralization can be divided into two stages, namely syn-ore and post-ore. The syn-ore minerals are primarily quartz, pitchblende, hematite, hydromica, chlorite, fluorite, and pyrite; the post-ore minerals include quartz, calcite, fluorite, pyrite, and hematite. The fluid inclusions of the early syn-ore stage characteristically contain O₂, and those of the late syn-ore and post-ore stage contain H₂ and CH₄. The fluid inclusions in quartz of the syn-ore stage include H₂O, H₂O–CO₂, and CO₂ types, and they occur in clusters or along trails. Homogenization temperatures (T_h) for the H₂O–CO₂ and two-phase H₂O inclusions range from 106 °C to >350 °C and cluster in two distinct groups for each type; salinities are lower than 10 wt% NaCl equiv. The ore-forming fluids underwent CO₂ effervescence or phase separation at ∼250 °C under a pressure of 1000–1100 bar. The U/Th values of the altered granites are lowest close to the ore, increase outwards, but subsequently decrease close to unaltered granites. From the unaltered granites to the ore, the lowest Fe₂O₃/FeO values become lower and the highest values higher. The REE patterns of the altered granites and the ores are similar to each other. The U contents of the ores show a positive correlation with total REE contents but a negative correlation with LREE/HREE ratios, indicating the pitchblende is REE-bearing and selectively HREE-rich. The δEu values of the ore show a positive correlation with U contents, indicating the early syn-ore fluids were oxidizing. The δCe values show a negative correlation, indicating the later mineralization environment became reducing. The water–rock interactions of the early syn-ore stage resulted in oxidization of altered granites and reduction of the ore-forming fluids, and it was this reduction that led to the uranium mineralization. During alteration in the early syn-ore stage, the oxidizing fluids leached uranium from granites close to faults, and Fe₂O₃/FeO ratios increased in the alteration zones. The late syn-ore and post-ore alteration decreased the Fe₂O₃/FeO ratios in the alteration zones. The δ¹⁸O_W–SMOW values of the ore-forming fluids range from −1.8‰ to 5.4‰, and the δD_W–SMOW values range from −104.4‰ to −51.6‰, suggesting meteoric water. The meteoric water underwent at least two stages of water–rock interaction: the first caused the fluids to become uranium-bearing, and the second stage, which was primarily associated with ore-bearing faults, led to uranium deposition as pitchblende, accompanied by CO₂ effervescence.     

Cl/Br ratios and stable chlorine isotope analysis of magmatic–hydrothermal fluid inclusions from Butte,Montana and Bingham Canyon,Utah

A bulk geochemical study has been carried out on fluid inclusion leachates extracted from quartz veins from porphyry Cu deposits in Butte, Montana, USA and Bingham Canyon, Utah, USA. The leachates mostly represent low-salinity magmatic–hydrothermal fluid inclusions. Their halogen ratios (Br/Cl) of fluid inclusion leachates were determined by ion chromatography, and δ³⁷Cl values of the leachates were measured by continuous-flow isotope ratio mass spectrometry. Br/Cl ratios from early pre-Main stage and later Main stage veins at Butte range from 0.60 to 1.88 × 10⁻³ M. Ratios are similar in pre-Main stage veins with sericite bearing selvages and Main stage samples ranging from 0.81 to 1.08 × 10⁻³ and from 0.92 to 1.88 × 10⁻³ M, respectively, clustering below seawater (1.54 × 10⁻³ M) and overlapping mantle values (~1–2 × 10⁻³ M). Two samples associated with early pre-Main stage potassic alteration yield distinctly lower Br/Cl ratios of 0.60 and 0.64 × 10⁻³ M. Butte δ³⁷Cl values range from −0.8‰ to −2.3‰ with no significant difference between pre-Main stage and Main stage samples. Br/Cl ratios for quartz veins from Bingham Canyon range from 0.18 to 3.68 × 10⁻³ M. Br/Cl ratios from Bingham range above and below previously reported for porphyry copper deposits. In contrast to Butte, δ³⁷Cl values for Bingham are lower, ranging from −0.9‰ to −4.1‰. In the absence of any processes which can significantly fractionate chlorine isotopes at high temperatures, we suggest that the porphyry system at Bingham, and to a lesser extent at Butte, have inherited negative chlorine isotopic signatures from the subducting slab generated at low temperatures.     

The genesis of sandstone‐type uranium deposits in the Ordos Basin,NW China: constraints provided by fluid inclusions and stable isotopes

Quartz from sandstone‐type uranium deposits in the east part of the Ordos Basin contains abundant secondary fluid inclusions hosted along sealed fractures or in overgrowths. These inclusions consist mainly of water with NaCl, KCl, CO₂ (135–913 ppm) and trace amounts of CO (0.22–16.8 ppm), CH₄ (0.10–1.38 ppm) and [SO₄]^2? (0.35–111 ppm). Homogenization temperatures of the studied fluid inclusions range from 90 to 210°C, with salinities varying from 0.35 to 12.6 wt‐% (converted to NaCl wt%), implying multiple stages of thermal alteration. Although high U is associated with a high homogenization temperature in one case, overall U mineralization is not correlated with homogenization temperature nor with salinity. The H and O isotopic compositions of fluid inclusions show typical characteristics of formation water, with δ¹⁸O ranging from 9.8 to 12.3‰ and δD from 26.9 to ?48.6‰, indicating that these fluid inclusions are mixtures of magmatic and meteoric waters. The oxygen isotope ratios of carbonates in cement are systematically higher than those of the fluid inclusions. Limited fluid inclusion‐cement pairs show that the oxygen closely approaches equilibrium between water and aragonite at 150°C. Highly varied and overall negative δ¹³C in calcite from cement implies different degrees of biogenetic carbon involvement. Correlations between U in bulk rocks and trace components in fluid inclusions are lacking; however, high U contents are typically coupled with high [SO₄]^2?, implying pre‐enrichment of oxidized materials in the U mineralization layer. All these relationships can be plausibly interpreted to indicate that U (IV), [SO₄]^2? as well as Na, K were washed out from the overlying thick sandstone by oxidizing meteoric water, and then were reduced by reducing agents, such as CH₄ and petroleum, likely from underlying coal and petroleum deposits, and possibly also in situ microbes at low temperatures.     

Metallogeny of the Shilu Fe–Co–Cu deposit,Hainan Island,South China: Constraints from fluid inclusions and stable isotopes

The Shilu deposit is a world-class Fe–Co–Cu orebody located in the Changjiang area of the western part of Hainan Island, South China. The distribution of Fe, Co, and Cu orebodies is controlled by strata of the No. 6 Formation in the Shilu Group and the Beiyi synclinorium. Based on a petrological study of the host rocks and their alteration assemblages, and textural and structural features of the ores, four mineralization stages have been identified: (1) the sedimentary ore-forming period; (2) the metamorphic ore-forming period; (3) the hydrothermal mineralization comprising the skarn and quartz–sulfide stage; and (4) the supergene period. The fluid inclusions in sedimentary quartz and/or chert indicate low temperatures (ca. 160 °C) and low salinities from 0.7 to 3.1 wt.% NaCl_eq, which corresponds to densities of 0.77 to 0.93 g/cm³. CO₂-bearing or carbonic inclusions have been interpreted to result from regional metamorphism. Homogenization temperatures of fluid inclusions for the skarn stage have a wide range from 148 °C to 497 °C and the salinities of the fluid inclusions range from 1.2 to 22.3 wt.% NaCl_eq, which corresponds to densities from 0.56 to 0.94 g/cm³. Fluid inclusions of the quartz–sulfide stage yield homogenization temperatures of 151–356 °C and salinities from 0.9 to 8.1 wt.% NaCl_eq, which equates to fluid densities from 0.63 to 0.96 g/cm³.Sulfur isotopic compositions indicate that sulfur of the sedimentary anhydrite and Co-bearing pyrite, and the quartz–sulfide stage, was derived from seawater sulfate and thermochemical sulfate reduction of dissolved anhydrite at temperatures of 200 °C and 300 °C, respectively. H and O isotopic compositions of the skarn and quartz–sulfide stage demonstrate that the ore-forming fluids were largely derived from magmatic water, with minor inputs from metamorphic or meteoric water. The Shilu iron ore deposit has an exhalative sedimentary origin, but has been overprinted by regional deformation and metamorphism. The Shilu Co–Cu deposit has a hydrothermal origin and is temporally and genetically associated with Indosinian granitoid rocks.     

Metallogenesis and hydrothermal evolution of Middle Jurassic porphyry Mo deposits in the southern Zhangguangcai Range,NE China: evidence from fluid inclusions,H–O–S isotopes,and Re–Os geochronology

A major metallogenic belt with substantial resources of gold, lead, zinc, copper, and molybdenum is present in the southern Zhangguangcai Range, NE China. Several large porphyry Mo deposits are located in this belt, as for example at Jidetun, Fu’anpu, and Daheishan. Five molybdenite samples from the Jidetun deposit yielded an Re–Os isochron age of 168.6 ± 2.1 Ma (mean standard weighted deviation = 0.20), and this is consistent with the Re–Os isochron ages of the other Mo deposits in the southern Zhangguangcai Range, giving a Middle Jurassic age for metallogenesis. The Jidetun, Fu’anpu, and Daheishan deposits all tend to have weakly enriched ³⁴S values of 0.80‰–3.20‰ and relatively low Re contents ranging from 3.073 to 43.567 ppm, which indicates the ore-forming materials were derived mainly from granitic magmas that had an origin in the mixture of crust and mantle. Three stages of mineralization can be identified in the deposits at Jidetun, Fu’anpu, and Daheishan. The original ore-forming fluids in stage I were characterized by high-temperature magmatic hydrothermal fluids that were most likely derived by exsolution from the Middle Jurassic ore-bearing magmas. However, two different fluid systems, NaCl–H₂O–CO₂ fluids and NaCl–H₂O fluids, were widespread in stage I of porphyry Mo deposits in the southern Zhangguangcai Range. Taking into account the regional geological characteristics and tectonic setting, we suggest that two different emplacement modes of the ore-bearing magmas explain the different fluid systems in stage I: the first magmas were emplaced along the contact zones between the strata and earlier granitoids, whereas the second magmas were emplaced entirely within the earlier granitoid intrusions. The stage II and III fluids were characterized by relatively lower temperatures and low H–O isotopic values, indicating a gradual evolution from magmatic to meteoric sources.     

Origin and evolution of hydrothermal fluids in the Taochong iron deposit,Middle–Lower Yangtze Valley,Eastern China: Evidence from microthermometric and stable isotope analyses of fluid inclusions

The Middle–Lower Yangtze River Valley is one of the most important metallogenic belts in China, hosting numerous Cu–Fe–Au–Mo deposits. The Taochong deposit is located in the northern part of the Fanchang iron ore district of the Middle–Lower Yangtze River metallogenic belt. The Fe-orebody is hosted by Middle Carboniferous to Lower Permian limestones. Skarns and Fe-orebodies occur as tabular bodies along interlayer-gliding faults, at some distance from the inferred granitic intrusions. Field evidence and petrographic observations indicate that the three stages of hydrothermal activity—the skarn, iron oxide (main mineralization stage), and carbonate stages—all contributed to the formation of the Taochong iron deposit. The skarn stage is characterized by the formation of garnet and pyroxene, with high-temperature, hypersaline hydrothermal fluids with isotopic compositions similar to those of typical magmatic fluids. These fluids were probably generated by the separation of brine from a silicate melt instead of the product of aqueous fluid immiscibility. The iron oxide stage coincides with the replacement of garnet and pyroxene by actinolite, chlorite, quartz, calcite and hematite. The hydrothermal fluids at this stage are represented by saline fluid inclusions that coexist with vapor-rich inclusions with anomalously low δD values (− 66‰ to − 94‰). The decrease in ore fluid δ¹⁸O_water with time and decreasing depth is consistent with the decreases in fluid salinity and temperature. The fluid δD values also show a decreasing trend with decreasing depth. Both fluid inclusion and stable isotopic data suggest that the ore fluid during the main period of mineralization was evolved by the boiling of various mixtures of magmatic brine and meteoric water. This process was probably induced by a drop in pressure from lithostatic to hydrostatic. The carbonate stage is represented by calcite veins that cut across the skarn and orebody, locally producing a dense stockwork. This observation indicates the veins formed during the waning stages of hydrothermal activity. The fluids from this stage are mainly represented by a variety of low-salinity fluid inclusions, as well as fewer high-salinity inclusions. These particular fluids have the lowest δ¹⁸O_water values (− 2.2‰ to 0.4‰) and a wide of range of δD values (− 40‰ to − 81‰), which indicate that they were originated from a mixture of residual fluids from the oxide stage, various amounts of meteoric water, and possibly condensed vapor. Low-temperature boiling probably occurred during this stage.We also discuss the reasons behind the anomalously low δD values in fluid inclusion water extracted by thermal decrepitation from quartz at high temperatures, and suggest that calcite data provide a possible benchmark for adjusting low δD values found in quartz intergrown with calcite.     

Ore genesis and hydrothermal evolution of the Huanggang skarn iron–tin polymetallic deposit,southern Great Xing'an Range: Evidence from fluid inclusions and isotope analyses

The southern Great Xing'an Range is one of the most important metallogenic belts in northern China, and contains numerous Pb–Zn–Ag–Cu–Sn–Fe–Mo deposits. The Huanggang iron–tin polymetallic skarn deposit is located in the Sn-polymetallic metallogenic sub-belt. Skarns and iron orebodies occur as lenses along the contact between granite plutons and the Lower Permian Huanggangliang Formation marble or Dashizhai Formation andesite. Field evidence and petrographic observations indicate that the three stages of hydrothermal activity, i.e., skarn, oxide and sulfide stages, all contributed to the formation of the Huanggang deposit.The skarn stage is characterized by the formation of garnet and pyroxene, and high-temperature, hypersaline hydrothermal fluids with isotopic compositions that are similar to those of typical magmatic fluids. These fluids most likely were generated by the separation of brine from a silicate melt instead of being a product of aqueous fluid immiscibility. The iron oxide stage coincides with the replacement of garnet and pyroxene by amphibole, chlorite, quartz and magnetite. The hydrothermal fluids of this stage are represented by L-type fluid inclusions that coexist with V-type inclusions with anomalously low δD values (approximately − 100 to − 116‰). The decrease in ore fluid δ¹⁸O_H2O values with time coincides with marked decreases in the fluid salinity and temperature. Based on the fluid inclusion and stable isotopic data, the ore fluid evolved by boiling of the magmatic brine. The sulfide stage is characterized by the development of sphalerite, chalcopyrite, fluorite, and calcite veins, and these veins cut across the skarns and orebodies. The fluids during this stage are represented by inclusions with a variable but continuous sequence of salinities, mainly low-salinity inclusions. These fluids yield the lowest δ¹⁸O_H2O values and moderate δD values ( − 1.6 to − 2.8‰ and − 101 to − 104‰, respectively). The data indicate that the sulfide stage fluids originated from the mixing of residual oxide-stage fluids with various amounts of meteoric water. Boiling occurred during this stage at low temperatures.The sulfur isotope (δ³⁴S) values of the sulfides are in a narrow range of − 6.70 to 4.50‰ (mean = − 1.01‰), and the oxygen isotope (δ¹⁸O) values of the magnetite are in a narrow range of 0.1 to 3.4‰. Both of these sets of values suggest that the ore-forming fluid is of magmatic origin. The lead isotope compositions of the ore (²⁰⁶Pb/²⁰⁴Pb = 18.252–18.345, ²⁰⁷Pb/²⁰⁴Pb = 15.511–15.607, and ²⁰⁸Pb/²⁰⁴Pb = 38.071–38.388) are consistent with those of K-feldspar granites (²⁰⁶Pb/²⁰⁴Pb = 18.183–18.495, ²⁰⁷Pb/²⁰⁴Pb = 15.448–15.602, ²⁰⁸Pb/²⁰⁴Pb = 37.877–38.325), but significantly differ from those of Permian marble (²⁰⁶Pb/²⁰⁴Pb = 18.367–18.449, ²⁰⁷Pb/²⁰⁴Pb = 15.676–15.695, ²⁰⁸Pb/²⁰⁴Pb = 38.469–38.465), which also suggests that the ore-forming fluid is of magmatic origin.     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.     

Ore geology,fluid inclusions and four-stage hydrothermal mineralization of the Shangfanggou giant Mo–Fe deposit in Eastern Qinling,central China

The Eastern Qinling, Central China, containing more than 20 Mesozoic porphyry ± skarn systems, is the most important Mo province in the world. The Shangfanggou giant Mo deposit, Luanchuan County, Henan Province, is a porphyry-skarn system hosted in a lithologic association comprising carbonaceous sandstone, shale, carbonate and chert within the Neoproterozoic Luanchuan Group. Mo ores are mainly altered porphyry, skarn and hornfels, with minor altered gabbro. The mineralization process includes four stages, potassic alteration of the porphyry and skarnization of dolomite marble in stage 1, stockworks of quartz + molybdenite ± sulfide (stage 2), pyrite + quartz ± sulfides (stage 3), and carbonate ± quartz ± fluorite (stage 4), respectively. Mo mineralization was generally associated with strong silicification and/or phyllic alteration. The fluid inclusions in minerals include three compositional types, i.e., CO₂-bearing (C-type), aqueous (W-type) and daughter mineral-bearing (S-type). Minerals formed in stages 1 to 3 contain all the three types of FIs, but the stage 4 minerals only contain the W-type FIs. Oxides and Cu-phosphate are recognized as daughter minerals in S-type inclusions in minerals of stage 1, whereas the daughter sulfide and reducing gases such as CO, CH₄, H₂S and C₂H₆ can be observed in quartz of stages 2 and 3, suggesting that the ore-forming fluids were initially oxidizing and then evolved to reducing. Boiling fluid inclusion assemblages can be observed in minerals formed in stage 2 or earlier, but not in stage 3 or later. Fluid boiling caused CO₂ escape, oxygen fugacity decrease and rapid precipitation of ore minerals, and was a key factor causing Mo-mineralization at Shangfanggou. Data and interpretations presented in this contribution show that the fluids forming the Shangfanggou Mo deposit evolved from CO₂-rich, high-salinity hypothermal, to CO₂-poor, low-salinity epithermal (low-T). The Mo mineralization at the Shangfanggou deposit mainly occurred at depth of 6.6–7.0 km, deeper than the majority of porphyry systems in volcanic arcs, which resulted from a CO₂-rich magma–fluid system originating from partial melting of thickened lower crust. The Shangfanggou mineral system developed during 158–134 Ma when the Yangtze–North China continental collision began to evolve from compression to extension. Magmatic hydrothermal deposits developed in a continental collision regime are generally formed by CO₂-rich, high-salinity fluids.     

P–T conditions of mineralization in the Jonnagiri granitoid-hosted gold deposit,eastern Dharwar Craton,southern India: Constraints from fluid inclusions and chlorite thermometry

Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H₂O–CO₂–CH₄ + salt) fluid that underwent phase separation and gave rise to gaseous (CO₂–CH₄), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O₂), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems.     

U–Pb zircon data of Variscan meta-igneous and igneous acidic rocks from an Alpine shear zone in Calabria (southern Italy)

The paper deals with the U–Pb data of zircon separated from three samples representative of mylonitic leucogranites, trondhjemites and pegmatites occurring along the Alpine tectonic zone between the Castagna and Sila Units in northern Calabria. These mylonites are associated to Variscan granitic-granodioritic biotite-rich augen gneisses derived from Neo-Proterozoic-Early Cambrian protoliths. Apparent ages ranging from Early Cambrian to post-Variscan have been obtained. Th, U and rare earth elements have been determined in two zircon domains of mylonitic leucogranite and trondhjemite giving different ages in order to get information relative to their geological significance. The pegmatite preserves intrusive contact with the augen gneisses and with the other mylonites; it turns out to be emplaced at 290–300 Ma, like the Variscan plutonites of the Castagna Unit. The deformation masks the original contacts of the mylonitic leucogranite and trondhjemite with the biotite-rich augen gneisses. The age-group averaging 540 Ma is interpreted as indicative of the emplacement of the protoliths and it coincides with the age previously determined for the emplacement of the protoliths of the biotite-rich augen gneisses. Zircon from the mylonitic pegmatite includes domains showing concordant and discordant ages younger than 290 Ma, thus reflecting various degrees of partial resetting and Pb-loss caused by post-Variscan events. Zircon from the mylonitic leucogranite and trondhjemite includes apparent ages between 300 and 280 Ma as well as ages younger than 250 Ma. Perturbation of U–Pb system by Alpine shearing appears evident; however, possibile effects caused by thermal input and hydrothermal fluid infiltration from the Variscan plutonites cannot be excluded.     

Copper‐gold mineralisation in New Guinea: Numerical modelling of collision,fluid flow and intrusion‐related hydrothermal systems

Two‐ and three‐dimensional numerical modelling techniques, constrained by key geodynamic data, provide insights into the controls on development of porphyry‐related Cu–Au mineralisation in the Tertiary collision zone of New Guinea. Modelling shows that the creation of local dilation to facilitate magma emplacement can be caused by reactivation of arc‐normal transfer faults, where they cut the weakened fold belt. Additionally, dilation occurs where fluid overpressuring is caused by collision‐related, south‐directed fluid flow being localised into the more permeable units of the Mesozoic passive‐margin sedimentary succession. Rapid uplift and erosion, which may be a mechanism for magmatic fluid release in these systems, is shown to be greatest in the west of West Papua, where the stronger Australian crust acts as a buttress. Within the Papuan Fold Belt, uplift is greatest near the margins, where the weaker fold belt abuts the stronger crust and/or major faults have been reactivated. Increased orographically induced precipitation and erosion exposes the lower parts of the stratigraphy within or on the margins of these uplifted zones. On a smaller scale, 2–D coupled fluid‐flow ‐ thermal‐chemical modelling uses a scenario of fluid mixing to calculate metal precipitation distribution and magnitude around an individual intrusive complex. Modelling highlights the interdependence of the spatial permeability structure, the regional temperature gradient, and the geometry of the convection cells and how this impacts on the distribution of metal precipitation.     

Development of corona textures around olivine in anorthosites of the Korosten’ pluton, Ukrainian Shield: Mineralogy, geochemistry, and fluid inclusions

New data on the composition of minerals in corona textures around olivine and crystal-fluid inclusions in olivine from anorthosites of the Korosten’ pluton (sampled in the Golovino quarry), Ukrainian Shield were obtained using electron and ion microprobe analyses, Raman spectroscopy, scanning electron microscopy, and cryo- and thermometry. The corona textures developed around olivine grains in contact with plagioclase and consist of inner orthopyroxene rims around olivine and outer rims of orthopyroxene-clinopyroxene-orthoclase-plagioclase symplectites. The symplectites and orthopyroxene rims most probably developed nearly simultaneously and grew in the opposite directions from the original contact of the magmatic olivine and plagioclase and replaced both olivine and plagioclase. The Al₂O₃ and CaO concentrations in the symplectitic orthopyroxene increase toward the contact with magmatic plagioclase, whereas the Al₂O₃ and CaO concentrations in the symplectitic plagioclase simultaneously decrease and its Na₂O and K₂O increase. Optically discernible crystalline and fluid phases of crystal-fluid inclusions in olivine were identified as pyroxenes (orthopyroxene and clinopyroxene), actinolite, Ca-and Fe, Mg-carbonates, and magnetite, along with practically pure highdensity CO₂. The mineral assemblages of corona texture in the Korsten’ anorthosites were produced by autometasomatic processes at a high CO₂ activity, and the local variations in the chemistry of corona minerals were likely controlled by the content and chemistry of the interstitial fluid and primary minerals. The coronas developed under subsolidus conditions, via the reaction interaction of olivine and plagioclase under the effect of an integranular fluid, with the dissolution of olivine and plagioclase at T = 980–860°C and P > 5 kbar. Inasmuch as corona textures do not occur ubiquitously in the rocks, the origin of the former was most probably controlled by the amount of the intergranular fluid.     

Genesis of the Nanyangtian scheelite deposit in southeastern Yunnan Province,China: evidence from mineral chemistry,fluid inclusions,and C–O isotopes

The Nanyangtian skarn-type scheelite deposit is an important part of the Laojunshan W–Sn polymetallic metallogenic region in southeastern Yunnan Province, China. The deposit comprises multiple scheelite ore bodies; multilayer skarn-type scheelite ore bodies are dominant, with a small amount of quartz vein-type ore bodies. Skarn minerals include diopside, hedenbergite, grossular, and epidote. Three mineralization stages exist: skarn, quartz–scheelite, and calcite. The homogenization temperatures of fluid inclusions in hydrothermal minerals that formed in different paragenetic phases were measured as follows: 221–423 °C (early skarn stage), 177–260 °C (quartz–scheelite stage), and 173–227 °C (late calcite stage). The measured salinity of fluid inclusions ranged from 0.18% to 16.34% NaCleqv (skarn stage), 0.35%–7.17% NaCleqv (quartz–scheelite stage), and 0.35%–2.24% NaCleqv (late calcite vein stage). Laser Raman spectroscopic studies on fluid inclusions in the three stages showed H₂O as the main component, with N₂ present in minor amounts. Minor amounts of CH₄ were found in the quartz–scheelite stage. It was observed that the homogenization temperature gradually reduced from the early to the late mineralization stages; moreover, δ¹³C_PDB values for ore-bearing skarn in the mineralization period ranged from ? 5.7‰ to ? 6.9‰ and the corresponding δ¹⁸O_SMOW values ranged from 5.8‰ to 9.1‰, implying that the ore-forming fluid was mainly sourced from magmatic water with a minor amount of meteoric water. Collectively, the evidence indicates that the formation of the Nanyangtian deposit is related to Laojunshan granitic magmatism.     

Mixed messages in iron oxide–copper–gold systems of the Cloncurry district,Australia: insights from PIXE analysis of halogens and copper in fluid inclusions

Proterozoic rocks of the Cloncurry district in NW Queensland, Australia, are host to giant (tens to hundreds of square kilometers) hydrothermal systems that include (1) barren regional sodic–calcic alteration, (2) granite-hosted hydrothermal complexes with magmatic–hydrothermal transition features, and (3) iron oxide–copper–gold (IOCG) deposits. Fluid inclusion microthermometry and proton-induced X-ray emission (PIXE) show that IOCG deposits and the granite-hosted hydrothermal complexes contain abundant high temperature, ultrasaline, complex multisolid (type 1) inclusions that are less common in the regional sodic–calcic alteration. The latter is characterized by lower salinity three-phase halite-bearing (type 2) and two-phase (type 3) aqueous inclusions. Copper contents of the type 1 inclusions (>300 ppm) is higher than in type 2 and 3 inclusions (<300 ppm), and the highest copper concentrations (>1,000 ppm) are found both in the granite-hosted systems and in inclusions with Br/Cl ratios that are consistent with a magmatic source. The Br/Cl ratios of the inclusions with lower Cu contents are consistent with an evaporite-related origin. Wide ranges in salinity and homogenization temperatures for fluid inclusions in IOCG deposits and evidence for multiple fluid sources, as suggested by halogen ratios, indicate fluid mixing as an important process in IOCG genesis. The data support both leaching of Cu by voluminous nonmagmatic fluids from crustal rocks, as well as the direct exsolution of Cu-rich fluids from magmas. However, larger IOCG deposits may form from magmatic-derived fluids based on their higher Cu content.     

Magmatic–hydrothermal processes in Sangdong W–Mo deposit,Korea: Study of fluid inclusions and 39Ar–40Ar geochronology

The Sangdong scheelite–molybdenite deposit in northeast South Korea consists of strata-bound orebodies in intercalated carbonate-rich layers in the Cambrian Myobong slate formation. Among them, the M1 layer hosts the main orebody below which lie layers of F1–F4 host footwall orebodies. Each layer was first skarnized with the formation of a wollastonite + garnet + pyroxene assemblage hosting minor disseminated scheelite. The central parts of the layers were subsequently crosscut by two series of quartz veining events hosting minor scheelite and major scheelite–molybdenite ores, respectively. The former veins associate amphibole–magnetite (amphibole) alteration, whereas the latter veins host quartz–biotite–muscovite (mica) alteration. Deep quartz veins with molybdenite mineralization are hosted in the Cambrian Jangsan quartzite formation beneath the Myobong formation. In the Sunbawi area, which is in close proximity to the Sangdong deposit, quartz veins with scheelite mineralization are hosted in Precambrian metamorphic basement. Three muscovite ³⁹Ar–⁴⁰Ar ages between 86.6 ± 0.2 and 87.2 ± 0.3 Ma were obtained from M1 and F2 orebodies from the Sangdong deposit and Sunbawi quartz veins. The Upper Cretaceous age of the orebodies is concordant with the published ages of the hidden Sangdong granite, 87.5 ± 4.5 Ma. This strongly suggests that the intrusion is causative for the Sangdong W–Mo ores and Sunbawi veins.Fluid inclusions in the quartz veins from the M1 and F2 orebodies, the deep quartz-molybdenite veins, and the Sunbawi veins are commonly liquid-rich aqueous inclusions having bubble sizes of 10–30 vol%, apparent salinities of 2–8 wt% NaCl eqv., and homogenization temperatures of 180–350 °C. The densities of the aqueous inclusions are 0.70–0.94 g/cm³. No indication of fluid phase separation was observed in the vein. To constrain the formation depth in the Sangdong deposit, fluid isochores are combined with Ti–in–quartz geothermometry, which suggests that the M1 and F2 orebodies were formed at depths of 1–3 km and 5–6 km below the paleosurface, respectively. The similarity of the Cs (cesium) concentrations and Rb/Sr ratios in the fluid inclusions of the respective orebodies indicate an origin from source magmas having similar degrees of fractionation and enrichment of incompatible elements such as W and Mo. High S concentrations in the fluids and possibly organic C in the sedimentary source likely promoted molybdenite precipitation in the Sangdong orebodies, whereas the scheelite deposition in the deep quartz–molybdenite veins hosted in the quartzite is limited by a lack of Ca and Fe in the hydrothermal fluids. The molybdenite deposition in the Sunbawi quartz–molybdenite veins hosted in the Precambrian metamorphic basement rocks was possibly limited by a lack of reducing agents such as organic C.     

The mangazeya Ag–Pb–Zn vein deposit hosted in sedimentary rocks,Sakha-Yakutia,Russia: Mineral assemblages,fluid inclusions,stable isotopes (C,O, S), and origin

The succession of mineral assemblages, chemistry of gangue and ore minerals, fluid inclusions, and stable isotopes (C, O, S) in minerals have been studied in the Mangazeya silver–base-metal deposit hosted in terrigenous rocks of the Verkhoyansk Fold–Thrust Belt. The deposit is localized in the junction zone of the Kuranakh Anticlinorium and the Sartanga Synclinorium at the steep eastern limb of the Endybal Anticline. The deposit is situated at the intersection of the regional Nyuektame and North Tirekhtyakh faults. Igneous rocks are represented by the Endybal massif of granodiorite porphyry 97.8 ± 0.9 Ma in age and dikes varying in composition. One preore and three types of ore mineralization separated in space are distinguished: quartz–pyrite–arsenopyrite (I), quartz–carbonate–sulfide (II), and silver–base-metal (III). Quartz and carbonate (siderite) are predominant in ore veins. Ore minerals are represented by arsenopyrite, pyrite, sphalerite, galena, fahlore, and less frequent sulfosalts. Three types of fluid inclusions in quartz differ in phase compositions: two- or three-phase aqueous–carbon dioxide (FI I), carbon dioxide gas (FI II), and two-phase (FI III) containing liquid and a gas bubble. The homogenization temperature and salinity fall within the ranges of 367–217°C and 13.8–2.6 wt % NaCl equiv in FI I; 336–126°C and 15.4–0.8 wt % NaCl equiv in FI III. Carbon dioxide in FI II was homogenized in gas at +30.2 to +15.3°C and at +27.2 to 29.0°C in liquid. The δ³⁴S values for minerals of type I range from–1.8 to +4.7‰ (V-CDT); of type II, from–7.4 to +6.6‰; and of type III, from–5.6 to +7.1‰. δ¹³C and δ¹⁸O vary from–7.0 to–6.7‰ (V-PDB) and from +16.6 to +17.1 (V-SMOW) in siderite-I; from–9.1 to–6.9‰ (V-PDB) and from +14.6 to +18.9 (V-SMOW) in siderite-II; from–5.4 to–3.1‰ (V-PDB) and from +14.6 to +19.5 (V-SMOW) in ankerite; and from–4.2 to–2.9‰ (V-PDB) and from +13.5 to +16.8 (V-SMOW) in calcite. The data on mineral assemblages, fluid inclusions, and ratios of stable isotopes allow us to speak about the formation of the Mangazeya deposit in relation to the activity of the hydrothermal–magmatic system. The latter combines emplacement of subvolcanic granitic stocks and involvement of fluids variable in salinity and temperature in ore deposition zone. The fluids released from crystallizing felsic magma and were formed in a convective cell by heating of meteoric and marine waters. The mechanism of ore deposition is related to phase separation (boiling) and mixing of fluids.