Assessment of environmental hazards at abandoned mining sites: A case study in Sardinia,Italy

In the last two centuries, several Pb–Zn mines were active in the Rio Mannu basin near Narcao (SW Sardinia, Italy), but are now abandoned. These abandoned mines pose a serious risk to the population and required an assessment of the hazard sources and the contaminant pathways in the area. The characterization plan of the Rio Mannu basin was carried out according to Italian protocols. Specifically, samples of soil, stream sediment, fine-grained ore-processing waste (from washery and flotation processes), surface water and groundwater have been analyzed in order to assess the levels of contamination in each mine area and the risks in the plains surrounding the site. Several potential chemical contaminants were considered both in solid materials and water samples. The Rosas mine was recognized as the most contaminated area in the basin, due to the presence of a large tailing pond, some fine-grained waste piles and two mine adits with concentrations of the toxic elements As, Cd, Cu, Pb, Sb and Zn exceeding Italian regulatory standards. The dispersion of contaminants occurs downstream from the small stream draining the area. In case of heavy rain the runoff into the streamlet transports the contaminated material far into the plain. The results of this study show that the characterization plan is a relatively cheap tool for establishing mitigation actions, prior to the realization of a complete, and usually expensive, remediation project at abandoned mine sites. Urgent recommended actions in the Rio Mannu basin include the treatment of the adit water prior to its discharge into the Rio Barisonis; the construction of drainage barriers on waste piles to reduce runoff and solid transport into the Rio Barisonis; the consolidation of the earthen dam containing the tailing pond of Rosas to avoid the deepening of erosion furrows that may threaten its stability.     

Validation of basaltic glass adsorption capabilities from geothermal arsenic in a basaltic aquifer: A case study from Bjarnarflag power Station,Iceland

Arsenic is a carcinogen known for its acute toxicity to organisms.Geothermal waters are commonly high in arsenic,as shown at the Bjarnarflag Power Plant,Iceland(～224 μg/kg of solvent).Development of geothermal energy requires adequate disposal of arsenic-rich waters into groundwater/geothermal systems.The outcome of arsenic transport models that assess the effect of geothermal effluent on the environment and ecosystems may be influenced by the sensitivity of hydraulic parameters.However,previous such studies in Iceland do not consider the sensitivity of hydraulic parameters and thereby the interpretations remain unreliable.Here we used the Lake Myvatn basaltic aquifer system as a case study to identify the sensitive hydraulic parameters and assess their role in arsenic transport.We develop a one-dimensional reactive transport model(PHREEQC ver.2.),using geochemical data from Bjarnarflag,Iceland.In our model,arsenite(H_3 ASO_3)was predicted to be the dominant species of inorganic arsenic in both groundwater and geothermal water.Dilution reduced arsenic concentration below～5 μg/kg.Adsorption reduced the residual contamination below～0.4μg/kg at 250 m along transect.Based on our modelling,we found volumetric input to be the most sensitive parameter in the model.In addition,the adsorption strength of basaltic glass was such that the physical hydrogeological parameters,namely:groundwater velocity and longitudinal dispersivity had little influence on the concentration profile.     

Hydrogeochemical baseline studies prior to gold mining: A case study in Sardinia (Italy)

An epithermal gold deposit is planned to be exploited in the Osilo area (North Sardinia). A detailed hydrogeochemical study was carried out to evaluate the water quality prior to mining, and to assess the potential impact of mining on the aquatic system. Forty-eight surface and ground waters were sampled at different seasonal conditions. A large set of chemical components was determined, taking into account the composition of ore and host rocks, as well as those components, such as cyanide, planned to be used in the mineral processing. Waters show different salinity and element concentrations depending on the composition of rocks drained, the time of circulation, the interaction with mineralised bodies, and climatic conditions. Most waters show relatively low concentrations of toxic or potentially harmful elements.Waters interacting with the ore deposit are generally non acidic, likely due to the low sulphidation system, the limited extension of the ore veins, the presence of calcite in the hydrothermal alteration assemblage, and the weathering of silicate rocks, which appears to contribute in buffering the acidity produced by the oxidation of sulphide minerals, especially pyrite. The nonacid environment does not favour the mobility of elements associated with the mineralisation, such as Cd, Co, Ni, Pb, Zn, and As. In addition, aqueous transport of these elements seems limited by the precipitation of ferrihydrite, which is able to reduce or remove these elements, particularly As, from solution. However, considering that exploitation will expose large quantities of mineralised materials to weathering, an adequate disposal of waste dumps and tailings needs to be carefully planned to prevent the potential dispersion of contaminants.     

Very low temperature,natural deformation of fine grained limestone: a case study from the Lucania region,southern Apennines,Italy

Abstract

The deformation behavior of fine grained limestones from the Monte Sirino area (Lucania region) of the southern Apennines has been analysed by constraining microstructural observations and crystallographic fabrics with data on the metamorphic conditions of deformation. X-ray and infrared analysis of clay minerals, together with illite ‘crystallinity’ data, suggest that the studied rocks underwent very low grade metamorphism in the deep diagenetic zone. The limestones consist of very fine grained (<10 μm) aggregates of micrite. Elliptically-shaped radiolarians, preserved as moulds with coarser (>20 μm) crystalline fillings, provide common strain markers. Optical microstructures and strain analysis indicate heterogeneous intracrystalline strain in the coarser (>50 μm) calcite. On the other hand, SEM and TEM observations, and crystallographic fabrics determined by X-ray texture goniometry, indicate a deformation involving not only intracrystalline slip, but also an important component of grain boundary sliding in the fine grained matrix. The inferred microscopic deformation mechanisms are compared with constitutive flow laws derived from experimental studies. For the maximum inferred temperature of deformation of 250 °C and geologic strain rates of 10^?13?10^?15 s^?1, deformation mechanism maps for calcite suggest twinning and other glide mechanisms to be active in grains larger than about 5?10 μm. Smaller grains would be mostly deformed by grain size sensitive creep mechanisms, which include both diffusion mass transfer processes and grain boundary sliding. Deformation features observed in the study limestones are compatible with the prediction of such temperature-dependent mechanism maps. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Very low temperature,natural deformation of fine grained limestone: a case study from the Lucania region,southern Apennines,Italy

The deformation behavior of fine grained limestones from the Monte Sirino area (Lucania region) of the southern Apennines has been analysed by constraining microstructural observations and crystallographic fabrics with data on the metamorphic conditions of deformation. X-ray and infrared analysis of clay minerals, together with illite ‘crystallinity’ data, suggest that the studied rocks underwent very low grade metamorphism in the deep diagenetic zone. The limestones consist of very fine grained (<10 μm) aggregates of micrite. Elliptically-shaped radiolarians, preserved as moulds with coarser (>20 μm) crystalline fillings, provide common strain markers. Optical microstructures and strain analysis indicate heterogeneous intracrystalline strain in the coarser (>50 μm) calcite. On the other hand, SEM and TEM observations, and crystallographic fabrics determined by X-ray texture goniometry, indicate a deformation involving not only intracrystalline slip, but also an important component of grain boundary sliding in the fine grained matrix. The inferred microscopic deformation mechanisms are compared with constitutive flow laws derived from experimental studies. For the maximum inferred temperature of deformation of 250 °C and geologic strain rates of 10^–13–10^–15 s^–1, deformation mechanism maps for calcite suggest twinning and other glide mechanisms to be active in grains larger than about 5–10 μm. Smaller grains would be mostly deformed by grain size sensitive creep mechanisms, which include both diffusion mass transfer processes and grain boundary sliding. Deformation features observed in the study limestones are compatible with the prediction of such temperature-dependent mechanism maps.     

Metabasites with eclogite facies relics from Variscides in Sardinia,Italy: a review

Metabasites with eclogite facies relics occur in northern Sardinia as massive to strongly foliated lenses or boudins embedded within low- to medium-grade rocks (Anglona) and migmatites (NE Sardinia). U–Pb zircon dating yielded 453 ± 14, 457 ± 2 and 460 ± 5 Ma as the protolith ages; 400 ± 10 and 403 ± 4 Ma have been interpreted as the ages of the HP event and 352 ± 3 and 327 ± 7 Ma as the ages of the main Variscan retrograde events. A pre-eclogite stage is documented by the occurrence of tschermakite, zoisite relics within garnet porphyroblasts (Punta de li Tulchi) and an edenite–andesine inclusion within a relict kyanite porphyroblast (Golfo Aranci). Four main metamorphic stages have been distinguished in the eclogite evolution: (1) eclogite stage, revealed by the occurrence of armoured omphacite relics within garnet porphyroblasts. The Golfo Aranci eclogites also include kyanite, Mg-rich garnet and pargasite; (2) granulite stage, producing orthopyroxene and clinopyroxene–plagioclase symplectites replacing omphacite. At Golfo Aranci, the symplectitic rims around relict kyanite consist of sapphirine, anorthite, corundum and spinel; (3) amphibolite stage, leading to the formation of amphibole–plagioclase kelyphites between garnet porphyroblasts and pyroxene–plagioclase symplectites and to the growth of cummingtonite on orthopyroxene. Tschermakite to Mg-hornblende, plagioclase, cummingtonite, ilmenite, titanite and biotite are coexisting phases; (4) greenschist to sub-greenschist stage, defined by the appearance of actinolite, chlorite, epidote ss, titanite, sericite and prehnite. The following P–T ranges have been estimated for the different stages. Eclogite stage 550–700°C; 1.3–1.7 GPa; granulite stage 650–900°C; 0.8–1.2 GPa, clustering in the range 1.0–1.2 GPa; amphibolite stage 550–740°C; 0.3–0.7 GPa; greenschist stage 300–400°C; 0.2–0.3 GPa. Comparable ranges characterise the other Variscan massifs in Europe; eclogite stage: T = 530–800°C; P from 0.7–1.1 to 1.7 ± 0.3 GPa; granulite stage T = 760–870°C and P from 1.1–1.4 to 7.2–9.9 GPa, clustering around 1.0–1.2 GPa. Whole-rock chemistry: Sardinian eclogites are N- to T-MORB; European ones N- to E-MORB or calc-alkaline.     

Modelling cover deformation and decoupling during inversion,using the Mid-Polish Trough as a case study

Seismic sections across the NW part of the Polish Basin show that thrust faults developed in the sedimentary units above the Zechstein evaporite layer during basin inversion. These cover thrust faults have formed above the basement footwall. Based on the evolution of the basin, a series of scaled analogue models was carried out to study interaction between a basement fault and cover sediments during basin extension and inversion. During model extension, a set of normal faults originated in the sand cover above the basement fault area. The distribution and geometry of these faults were dependent on the thickness of a ductile layer and pre-extension sand layer, synkinematic deposition, the amount of model extension, as well as on the presence of a ductile layer between the cover and basement. Footwall cover was faulted away from the basement only in cases where a large amount of model extension and hanging-wall subsidence were not balanced by synkinematic deposition. Model inversion reactivated major cover faults located above the basement fault tip as reverse faults, whereas other extensional faults were either rotated or activated only in their upper segments, evolving into sub-horizontal thrusts. New normal or reverse faults originated in the footwall cover in models which contained a very thin pre-extension sand layer above the ductile layer. This was also the case in the highly extended and shortened model in which synkinematic hanging-wall subsidence was not balanced by sand deposition during model extension. Model results show that inversion along the basement fault results in shortening of the cover units and formation of thrust faults. This scenario happens only when the cover units are decoupled from the basement by a ductile layer. Given this, we argue that the thrusts in the sedimentary infill of the Polish Basin, which are decoupled from the basement tectonics by Zechstein evaporites, developed due to the inversion of the basement faults during the Late Cretaceous-Early Tertiary.     

Fluids in low-pressure migmatites: a fluid inclusion study of rocks from the Gennargentu Igneous Complex (Sardinia, Italy)

Summary The low-pressure emplacement of a quartz diorite body in the metapelitic rocks of the Gennargentu Igneous Complex (Sardinia, Italy) produced a contact metamorphic aureole and resulted in migmatisation of part of the aureole through partial melting. The leucosome, formed by dehydration melting involving biotite, is characterised by granophyric intergrowth and abundant magnetite crystals. A large portion of the high temperature contact aureole shows petrographic features that are intermediate between quartz diorite and migmatite s.s. (i.e. hybrid rocks). A fluid inclusion study has been performed on quartz crystals from the quartz diorite and related contact aureole rocks, i.e. migmatite sensu stricto (s.s.) and hybrid rocks. Three types of fluid inclusions have been identified: I) monophase V inclusions, II) L + V, either L-rich or V-rich aqueous saline inclusions and III) multiphase V + L + S inclusions. Microthermometric data characterised the trapped fluid as a complex aqueous system varying from H₂O–NaCl–CaCl₂ in the quartz diorite to H₂O–NaCl–CaCl₂–FeCl₂ in the migmatite and hybrid rocks. Fluid salinities range from high saline fluids (50 wt% NaCl eq.) to almost pure aqueous fluid. Liquid-vapour homogenisation temperatures range from 100 to over 400 °C with an average peak around 300 °C. Temperatures of melting of daughter minerals are between 300 and 500 °C. Highly saline liquid- and vapour-rich inclusions coexist with melt inclusions and have been interpreted as brine exsolved from the crystallising magma. Fluid inclusion data indicate the formation of fluid of high iron activity during the low-pressure partial melting and a fluid mixing process in the hybrid rocks.     

Late orogenic collapse and thermal doming in the northern Gondwana margin incorporated in the Variscan Chain: A case study from the Ozieri Metamorphic Complex, northern Sardinia, Italy

A branch of the South European Variscan chain is noticeably exposed in Sardinia. The early stage of collision between the Northern Gondwana margin and the Armorica Terrane Assemblage (ATA) generated syn-metamorphic folding and thrusting. The evidences of such deformation are well preserved in the nappe zone, a structural domain characterized by stacking of different tectonic units under metamorphism of Barrovian greenschist facies. A late, post-nappe, shortening, under retrograde metamorphic conditions, gave rise to wide, upright, N120–N160 trending antiforms that control the trend of the chain. The structural analysis of the Ozieri Metamorphic Complex (OMC) shows evidence of an important phase of late-Variscan extensional tectonics. Deformation results in, the formation of oppositely dipping, normal shear zones, which developed at upper and middle structural level along the limbs of major regional antiforms causing fabric reactivation, crustal thinning, and exhumation of the OMC core. Within the OMC, the activity of the shear zones was coeval with HT-LP metamorphism as suggests the occurrence of syn-kinematic cordierite + andalusite ± sillimanite + biotite. Whereas syntectonic dykes and a tonalite body in the deeper part of the OMC indicate that early emplacement of melt along shear zones and/or in the antiform hinges possibly supplied the heat for the anomalous thermal gradient and triggered the exhumation of a core complex-like structure.     

Insight into the development of a carbonate platform through a multi-disciplinary approach: a case study from the Upper Devonian slope deposits of Mount Freikofel (Carnic Alps,Austria/Italy)

The development and behavior of million year-scaled depositional sequences recorded within Palaeozoic carbonate platform has remained poorly examined. Therefore, the understanding of palaeoenvironmental changes that occur in geological past is still limited. We herein undertake a multi-disciplinary approach (sedimentology, conodont biostratigraphy, magnetic susceptibility (MS), and geochemistry) of a long-term succession in the Carnic Alps, which offers new insights into the peculiar evolution of one of the best example of Palaeozoic carbonate platform in Europe. The Freikofel section, located in the central part of the Carnic Alps, represents an outstanding succession in a fore-reef setting, extending from the Latest Givetian (indet. falsiovalis conodont zones) to the Early Famennian (Lower crepida conodont zone). Sedimentological analysis allowed to propose a sedimentary model dominated by distal slope and fore-reef-slope deposits. The most distal setting is characterized by an autochthonous pelagic sedimentation showing local occurrence of thin-bedded turbiditic deposits. In the fore-reef slope, in a more proximal setting, there is an accumulation of various autochthonous and allochthonous fine- to coarse-grained sediments originated from the interplay of gravity-flow currents derived from the shallow-water and deepwater area. The temporal evolution of microfacies in the Freikofel section evolves in two main steps corresponding to the Freikofel (Unit 1) and the Pal (Unit 2) limestones. Distal slope to fore-reef lithologies and associate changes are from base to top of the section: (U1) thick bedded litho- and bioclastic breccia beds with local fining upward sequence and fine-grained mudstone intercalations corresponding, in the fore-reef setting, to the dismantlement of the Eifelian–Frasnian carbonate platform during the Early to Late Frasnian time (falsiovalis to rhenana superzones) with one of the causes being the Late Givetian major rift pulse; (U2) occurrence of thin-bedded red nodular and cephalopod-bearing limestones with local lithoclastic grainstone intercalations corresponding to a significant deepening of the area and the progressive withdrawal of sedimentary influxes toward the basin, in relation with Late Frasnian sea-level rise. MS and geochemical analyses were also performed along the Freikofel section and demonstrate the inherent parallel link existing between variation in MS values and proxy for terrestrial input. Interpretation of MS in terms of palaeoenvironmental processes reflects that even though distality remains the major parameter influencing MS values, carbonate production and water agitation also play an important role.     

Use of reaction path modeling to predict the chemistry of stream water and groundwater: a case study from the Fiume Grande valley (Calabria,Italy)

The irreversible water–rock mass exchanges leading to the production of the Fiume Grande valley (Calabria, Italy) stream waters and groundwaters, starting from local rainwaters, were simulated through reaction path modeling in reaction progress (stoichiometric) mode. The simulations assumed bulk dissolution of a phyllitic rock and calcite and precipitation of gibbsite, kaolinite, amorphous silica, illite, a smectite solid mixture, a hydroxide solid mixture, and a trigonal carbonate solid mixture. The analytical contents of major and trace elements in stream waters and groundwaters were satisfactorily reproduced. However, further investigations are necessary to clarify the fate of As in this natural systems.

Interaction between a dam site and karst springs: The case of Supramonte (Central-East Sardinia, Italy)

Sardinia is one of the Italian regions with the greatest number of dams per inhabitants, almost 60 for a population of only 1.5 million people. Many of these dam sites are located on non-carbonate rocks along the main rivers of the Island and their waters are used for irrigation, industrial, energy supply, drinking and flood regulation purposes.The Pedra 'e Othoni dam on the Cedrino river (Dorgali, Central-East Sardinia) is located along the threshold of the Palaeozoic basement on the Northern border of the Supramonte karst area, where water is forced to flow out of the system through several resurgences, the most famous of which is the Su Gologone vauclusian spring, used for drinking water supply. The other main outflows of the system, Su Tippari and San Pantaleo springs, are at present almost permanently submerged by the high water level of the Pedra 'e Othoni dam. In the near future water will be supplied also to other communities with a possible increase of water taken from the spring.The dam, originally meant to regulate the flooding of Cedrino river but actually used for all sorts of purposes (electricity supply, drinking water, irrigation of farmlands, industrial uses), has a maximum regulation altitude of 103 m a.s.l., only slightly less than a meter below the Su Gologone spring level (103.7 m), and 4 and 9 m respectively above the submerged Su Tippari and San Pantaleo springs.During floods of the Cedrino river, occurring on average twice a year, also the Su Gologone spring becomes submerged by the muddy waters of the lake for a time ranging between a couple of hours up to several days, making water supply impossible.The analysis of the available meteorological and hydrogeological data relative to the December 2004 flood, one of the severest of the past 100 years, suggests that the reservoir is filled in a few days time. Several flooding scenarios have been reconstructed using digital terrain models, showing that backflooding submerges most of the discharge area of the aquifer, having important repercussions also on the inland underground drainage system. The upstream flood prone areas prevalently comprise agricultural lands with some sparse houses, but also highly frequented tourist facilities. Fortunately flooding occurs outside the tourist season, thus limiting risk to a limited number of local inhabitants. Massive discharge at the dam site, instead, determines a more hazardous situation in the Cedrino coastal plain, where population density in low lying areas is much higher. To avoid flooding hazard upstream the water level in the lake should be regulated, keeping it low in the flood prone seasons, and having it filled from the end of the winter in order to have enough water stocked before the beginning of the summer. Discharge at the dam site, instead, should be done cautiously, preventing severe flooding of the coastal Cedrino plain.     

Os-rich nuggets from Au-PGE placers of the Maimecha-Kotui Province, Russia: a multi-disciplinary study

Summary ?Geological, mineralogical and Os isotopic data for detrital PGE-mineralization derived from the Guli and Bor-Uryah ultramafic massifs, within the Maimecha-Kotui Province (the northern part of the Siberian Platform, Russia), are presented for the first time. The detrital platinum-group minerals (PGM) are dominated by Os–Ir–(Ru) species, which is typical for ophiolites or Alpine-type complexes. However, the PGM assemblage in the placers investigated is similar to that derived from zoned platiniferous clinopyroxenite–dunite massifs (also known as Uralian-, Alaskan-type and Aldan-type massifs). The unique features of the Au-PGE placers at Guli are (1) the dominance of Os-rich alloys over other PGM and Au, and (2) the considerable predicted resources of noble metals, particularly osmium. Dominant chromite, olivine and clinopyroxene inclusions recorded in Os–Ir–(Ru) alloys imply that they were derived from ultramafic sources (e.g., chromitite, dunite and clinopyroxenite). The first in situ osmium-isotope measurements by laser ablation - multiple collector - inductively coupled plasma mass spectrometry of different, intimately intergrown, PGM (e.g., laurite and Os-rich alloys) in various nuggets from Guli have revealed low ¹⁸⁷Os/¹⁸⁸Os and γOs values. They yield a very narrow range of ¹⁸⁷Os/¹⁸⁸Os (0.12432 to 0.12472) and γOs (− 2.39 to − 2.07). These values are indicative of a common chondritic or subchondritic mantle source of PGE. ¹⁸⁷Os/¹⁸⁸Os and γOs values of Os-rich alloys, derived from the Bor-Uryah massif, are different (i.e., γOs ranges from − 2.67 to − 1.30). The mineral-isotopic data obtained are consistent with the conclusion that the PGM were derived from parent ultramafic source rocks. Os-isotope model ages in the range of 495 to 240 Ma constrain the age of ultramafic protoliths in the northern part of the Siberian Craton. The variation in ¹⁸⁷Os/¹⁸⁸Os values for detrital PGM, where the provenance source is unknown, is considered to be a useful technique for distinguishing parent bedrock sources. Received July 12, 2001; revised version accepted December 27, 2001     

Rare earth elements in waters from the albitite-bearing granodiorites of Central Sardinia, Italy

With the aim of contributing to the knowledge of the geochemical behaviour and mobility of the rare earth element (REE) in the natural water systems, the ground and surface waters of the Ottana-Orani area (Central Sardinia, Italy) were sampled. The study area consists of albititic bodies included in Hercynian granodiorites. The waters have pH in the range of 6.0-8.6, total dissolved solid (TDS) of between 0.1 and 0.6 g/l, and major cation composition dominated by Ca and Na, whereas predominant anions are Cl and/or HCO₃.The pH and the major-element composition of the waters are the factors affecting the concentration of REE in solution. The concentrations of ∑REE+Y in the samples filtered at 0.4 μm vary between 140 and 1600 ng/l, with La of between 14 and 314 ng/l, and Yb of between <6 and 12 ng/l. A negative Ce anomaly, especially marked at high pH, is observed in the groundwaters. The surface waters show lower REE concentrations, which are independent of pH, and negligible Ce anomaly.Speciation calculations, carried out with the EQ3NR computer program, showed that the complexes with the CO₃²⁻ ligand are the dominant REE species at pH in the range of 6.7-8.6. The REE³⁺ ions dominate the speciation at pH <6.7 and only in the light REE (LREE).The relative concentrations of REE in water roughly reflect those in the aquifer host rocks. However, when concentrations of REE in water are normalised relative to the parent rocks, a preferential fractionation of heavy REE (HREE) into the water phase can be observed, suggesting the greater mobility and stability of HREE in aqueous solution.     

Mineralogical Characteristics and Cationic Exchange Properties of a Zeolite Mineral from Romana, NW Sardinia, Italy

An investigation was conducted into the Tertiary ignimbrite formations in the Romana area in NW Sardinia. Scanning electron microscopy–energy-dispersive spectrometry indicated the presence of clinoptilolite and subordinate smectite, quartz, mordenite and calcite. Laboratory analyses of representative samples collected from the deposit indicated a cation exchange capacity ranging from 85 to 135 mEq per 100 g. Ion exchange experiments conducted in flasks containing different initial cation concentrations and in columns supplied with solution having constant cation concentration, showed different selectivity towards the cations examined, in the order: NH₄⁺> Pb²⁺> Cd²⁺> Cu²⁺> Zn²⁺> Mn²⁺> Ni²⁺. Compared to the untreated material, under the experimental conditions used and considering the eluate, and the Italian regulatory limits for discharge into surface waters, the zeolite treated with a 1-N NaCl solution yielded a 1.3–5-fold increase in the volume of treated water, depending on the cation examined. The experimental results obtained show that the cationic exchange properties of the zeolite rock from the Romana deposit are comparable with the average quality of zeolites currently imported into Italy from non-European countries.     

Geochemistry of metabasites from NE Sardinia, Italy: nature of the protoliths, magmatic trend, and geotectonic setting

Summary The metabasites of Montiggiu Nieddu occur as a lenticular body in the Hercynian migmatite complex of NE Sardinia and consist of two major lithological associations: ultramafic amphibolites and plagioclase-banded amphibolites, which are genetically related by processes of cumulate differentiation of an original tholeiitic magma. The ultramafic amphibolites consist of relics of igneous phases (anorthite, olivine, orthopyroxene, and clinopyroxene) and metamorphic minerals (orthopyroxene, clinopyroxene, plagioclase, garnet, chlorite, and amphibole) in variable proportions. Based on the distribution of the relics of igneous minerals three main compositional layers (A, B, C) have been identified in the ultramafic amphibolites. The plagioclase-banded amphibolites consist of dark-green and white bands made up of plagioclase, amphibole, garnet, and rare pyroxene in variable proportions. No relics of magmatic minerals were observed. The trace element patterns of the Montiggiu Nieddu metabasites are characterised by selective enrichment of incompatible elements of low ionic potential, such as Sr, Rb, Ba, and Th, and low abundance of K, Cr, Ni, and elements of high ionic potential (from Ta to Yb), which define a relatively flat trend similar to MORB composition. Ti, Y, and heavy rare earth elements are all positively correlated with Zr. This correlation suggests that no significant transport of these elements took place during metamorphism. The metabasites of Montiggiu Nieddu are characterised by low Ti, Ti/V, and Ti/Zr content, low rare earth and high-field strength element concentrations, and moderate selective enrichment in large-ion lithophile elements. They also show geochemical features similar to those of supra subduction zone tholeiites. The CaO-MgO diagram displays a segmented trend, which provides powerful evidence in favour of crystal-liquid separation during magmatic evolution. Received December 4, 2000; revised version accepted January 29, 2001     

Assessment of visual impact induced by surface mining with reference to a case study located in Sardinia (Italy)

Surface mining and quarrying typically generate a considerable number of environmental impacts among which landscape alteration remains one of the most significant. Although landscape alteration does not directly affect public health, it may produce an adverse reaction among potential observers and compromise the use and potential growth of the surrounding territory. In order to assess the impact produced by surface excavation, some aspects of landscape modification can be objectively measured, such as the extent of the visible alteration, its shape and the chromatic contrast with the surroundings. With reference to a case study located in Sardinia, this article discusses the implementation of two different visual impact assessment methods, one defined by the EC decision 272/02 (Commission Decision 2002), the other previously proposed by the authors of the present article and based on the estimation of the impact indicator Lvi (level of visual impact). The comparison of the results proves that the method established by the EC decision leads to the underestimation of the visual impact for alterations which are significantly wider than their height. On the other hand, the implementation of the Lvi method clearly shows how the indicator is affected by the quarry’s lateral extent and suggests the possibility of calculating a global impact factor LVI to be associated to a given route, considering the variability of the visual impact with the curvilinear abscissa of the route itself.     

Preliminary geochemical exploration in semiarid climate: The case of a porphyry-type occurrence in Sardinia (Italy)

In the southwestern part of Sardinia some subvolcanic andesitic bodies occur, related to rift structures. Weak alteration phenomena and the presence of pyrite disseminations led the authors to investigate the area through petrographical studies and geochemical prospecting of rocks and soils.The geochemical survey showed that, given the local morphological and climatic conditions, rock and soil sampling is well correlated; furthermore, correlations relating Cu with Ba and Sr proved effective in defining the anomalous areas.The main anomaly area found by these studies could represent a porphyry copper body.     

细粒浊积岩特征、分布及发育机制:以川北唐家河剖面寒武系郭家坝组为例*

细粒浊积岩是一类较为特殊的浊积岩类型,与可用鲍马序列解释的完整经典浊积岩相比,其颗粒粒径明显偏细,小于63μm的颗粒含量超过50%。通过对四川盆地北部唐家河剖面寒武系第二统郭家坝组上部地层的系统研究发现,Stow细粒浊积岩序列发育广泛。该序列下部(T0-T3)主要为极细砂、粉砂与泥质纹层互层,发育微弱冲刷构造和泄水构造等软沉积物变形构造;中部(T4-T6)为泥质层段夹断续粉砂质纹层;上部(T7-T8)转变为均质泥岩段,生物扰动构造发育,整体序列具有正粒序特征。浊积岩序列中碎屑颗粒主要为石英、岩屑和云母,长石少见,杂基含量高;粒度频率分布曲线(直方图)显示颗粒分选性比传统浊积岩好,且自下而上各砂质纹层内颗粒粒径变细;概率值累计曲线表现为“一段式”和“上凸的折线式”2种,且悬浮组分占据了绝大优势;C-M图以平行于“C=M”基线为特征,但受碎屑颗粒粒级偏小的影响,投点整体沿C=M基线向左下偏移,显示该序列具有浊流递变悬浮沉积的特点。结合筇竹寺阶(第二统)沉积背景,认为靠近研究区西北侧的摩天岭古陆为浊积岩发育的主要物源区,台内地形的遮挡为细粒浊积岩的发育提供了良好的地形条件,悬浮搬运和阵发性环境事件(如风暴、洪水等)搬运为细粒沉积物主要的搬运机制。以唐家河剖面为代表的寒武系郭家坝组细粒浊积岩的广泛发育,对于认识四川盆地北缘古地理格局和非常规油气勘探具有重要意义。