Development of peer‐to‐peer (P2P) internet online hybrid test system

A new Internet online hybrid test system, designated the ‘peer‐to‐peer (P2P) Internet online hybrid test system’, is proposed. In the system, the simulated structure is divided into multiple substructures, and each substructure is analysed numerically or tested physically in parallel at geographically distributed locations. The equations of motion are not formulated for the entire structure but for each substructure separately. Substructures are treated as highly independent systems, and only standard I/O, i.e. displacements and forces at the boundaries, are used as interfaces. A ‘Coordinator’ equipped with an iterative algorithm based on quasi‐Newton iterations is developed to achieve compatibility and equilibrium at boundaries. A test procedure, featuring two rounds of quasi‐Newton iterations and using assumed elastic stiffness, is adopted to avoid iteration for the substructure being tested physically. A fast and stable solution using a socket mechanism is developed for data exchange over the Internet. Demonstration tests applied to a base‐isolated structure was conducted, and the results are compared with an online hybrid test using the conventional test method. The results obtained from the P2P Internet hybrid test match very closely those obtained from the conventional tests. Investigations are also carried out on time consumption and control accuracy. The results show that the Internet data exchange solution using the socket mechanism is fast, and tests were completed successfully under the constructed Internet online hybrid test environment. Copyright © 2006 John Wiley & Sons, Ltd.     

Collapse simulation of a four‐story steel moment frame by a distributed online hybrid test

The collapse of a one‐bay, four‐story steel moment frame is simulated in this study by the proposed peer‐to‐peer (P2P) Internet online hybrid test system. The typical beam hinging mechanism, which is ensured by a strong‐column, weak‐beam design, is reproduced. The plastic hinges at the column bases are taken as the experimental portions, while the superstructure is analyzed numerically by a general‐purpose finite element program. The implicit plastic rotations of the two column bases are treated as boundary displacements. In order to account for the complex behavior of the column bases, the P2P system is modified to use the secant stiffness during iterations, and the physical specimens are designed such that the plastic hinge behavior can be obtained. For this study, the three substructures are distributed to different locations. A large ground motion is repeatedly imposed until the column bases lose their capacity to sustain the gravity load. As a result, significant deterioration is observed at both column bases. The proposed P2P system is thus demonstrated to be able to accommodate multiple‐tested substructures involving unstable behavior. The results suggest that the P2P Internet online hybrid test system provides a reliable means of studying structures up to collapse. Copyright © 2008 John Wiley & Sons, Ltd.     

Online hybrid test by internet linkage of distributed test‐analysis domains

Online hybrid tests (called the online tests), particularly when combined with substructuring techniques, are able to conduct large‐scale tests. An extension of this technique is to combine multiple loading tests conducted in remote locations and to integrate the tests with large numerical analysis codes. In this study, a new Internet online test system is developed in which a physical test is conducted in one place, the associated numerical analysis is performed in a remote location, and the two locations communicate over the Internet. To implement the system, a technique that links test and analysis domains located at different places is proposed, and an Internet data exchange interface is devised to allow data communication across Internet. A practical method that utilizes standard protocols implemented by operating systems for sharing files and folders is adopted to ensure stable and robust communication between remotely located servers that commonly protect themselves by strict firewalls. To combine the online test with a finite element program formulated in an incremental form and adopting an implicit integration scheme, a tangent stiffness prediction procedure is proposed. In this procedure, a tangent stiffness is estimated based on a few previous steps of experimental data. Using the system devised, tests on a base‐isolated structure were carried out. Here, the base‐isolation layer was taken as the tested part and tested in Kyoto University, Japan, and the superstructure was modelled by means of a finite element program and analysed in a computer located in Osaka University. A series of physical Internet online tests were carried out, with the integration time interval and the method of tangent stiffness prediction as the major parameters. The tests demonstrated that the Internet communication was very stable and robust, without malfunctions. The proposed method of stiffness prediction was effective even when the experimental hysteresis curves exhibited complex behaviour, thereby ensuring accurate simulation for the earthquake response of the entire structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Hybrid formulation of operator splitting (OS) and Newmark‐β methods for collaborative structural analysis (CSA)

A collaborative structural analysis (CSA) system is developed, which is capable of performing highly sophisticated structural analyses utilizing beneficial features of existing individual structural analysis programs. In the system, the global equations of motion for the overall structural system are formulated in the host program. Some substructures, whose behaviors are relatively simple, are directly solved in the host program, whereas those having complex behavior are analyzed by the station programs. A time‐consuming static condensation procedure is needed for the substructures analyzed by the station programs if adopting an implicit integration scheme. The operator splitting (OS) method, which does not require tangential stiffness, can be used to improve the system efficiency. To this end, a hybrid formulation of the Newmark‐β and OS methods is proposed, and a CSA scheme based on the hybrid formulation is developed. In the CSA system adopting the hybrid formulation, the degrees of freedom whose tangential stiffness are unavailable are formulated by the OS method, whereas the rest are still formulated by the commonly used Newmark‐β method. Using the system, analyses of a three‐story‐braced steel moment‐resisting frame are conducted. In the analyses, the column bases are analyzed using the commercial finite element method software ABAQUS, and the remaining structural elements are analyzed using a frame analysis program called NETLYS. Results suggest that the hybrid formulation is very effective for the CSA system. Copyright © 2008 John Wiley & Sons, Ltd.