水合氧化锆吸附硼的研究

详细地研究了硼在水合氧化锆吸附剂上的吸附行为。研究结果表明，水合氧化锆的吸硼速率较快，２ｈ可完全达平衡，且吸附可用Ｆｒｅｕｎｄｌｉｃｈ等温吸附线很好地拟合。被吸附的硼易被碱液洗脱，通过水合氧化锆上硼的“吸附－脱附循环”研究，表明该吸附剂的吸附性能好，再生能力强，循环使用寿命长，是一种很有价值的高效脱硼吸附剂。     

养殖海带对Pb2+、Ni2+吸附性能的初步研究

人工养殖海带经交联和酸处理，制得颗粒状况吸附剂，研究该吸附剂与铅，镍离子的交换行为，结果表明：配比，pH、温度，时间等条件影响吸附性能，其吸附行为在一定的温度和浓度范围内较好地符合freundlich等温吸附线。     

海藻生物吸附金属离子技术的特点和功能

生物吸附技术是环境领域近年来迅速发展起来的处理工业污染废水的新技术。它以各种生物（菌类或藻类）吸附废水中的重金属离子，具有吸附容量大、选择性强、效率高、消耗少，并能有效地处理含低浓度重金属离子废水等优点。本文对国内外当前生物吸附金属离子技术的研究与应用进展作了综述，包括生物吸附技术的优越性，生物吸附剂的分类与来源，生物吸附的机理，影响生物吸附的因子，生物吸附剂的洗脱及固定化等问题。通过对这些工作的了解，使我们对方兴未艾的海藻生物吸附技术理论基础和实际应用研究有更确切的认识。这些理论基础研究工作为该项技术进一步研究发展打下了实际应用基础。     

非晶态磷酸锡去除高盐介质中Pb（Ⅱ）研究

利用合成的非晶态磷酸锡作为吸附剂, 研究了多种因素（pH、吸附时间、初始浓度、温度、离子强度）对吸附剂吸附水溶液中Pb2＋的影响。结果表明, 非晶态磷酸锡对Pb2＋的吸附量随着pH（3～6）以及吸附时间的增大而增加。用Freundlich、Langmuir 模型对等温吸附数据进行处理, Langmuir 方程拟合效果最...     

负载镧的EGDE交联壳聚糖微球对氟离子的吸附平衡与吸附动力学

采用负载镧的乙二醇二缩水甘油醚(EGDE)交联壳聚糖微球对含氟水进行吸附处理.该吸附剂的适宜工作条件为:温度30～50℃,pH值7.0,吸附时间30 min.用吸附等温线描述了F-在吸附剂上的吸附平衡,并用动力学模型研究了其吸附动力学机制.结果表明:吸附剂对F-的吸附平衡符合Langmuir吸附等温线和Freundlich吸附等温线,饱和吸附容量为25.7mg·g-1;该吸附剂对F-的吸附既包含化学吸附又包含物理吸附过程,以单分子层的化学吸附为主;吸附动力学符合拟二级动力学方程,吸附过程受化学吸附机理的控制,颗粒内扩散和液膜形成的边界层是其限速步骤.     

海藻生物吸附金属离子的机理和影响因素

本文在前文“海藻生物吸附金属离子技术的特点和功能”的基础上，进一步阐述了生物吸附的机理，影响生物吸附的因子，生物吸附剂的洗脱及固定化等问题．通过对这些工作的了解，使我们对正在发展的海藻生物吸附技术理论基础和实际应用研究有更确切的认识、这些理论基础研究工作正是为对该项技术发展的进一步研究打下实际应用基础。     

用硫酸镁和造纸草浆黑液制备吸附剂及其对活性黄ST-4RFN吸附研究

利用硫酸镁和造纸草浆黑液制备含镁氧化合物的吸附剂,通过化学分析、表面性质分析、X射线衍射和红外光谱等对吸附剂进行了表征.考察了吸附剂焙烧温度、投加量、吸附时间以及pH值等因素对活性黄ST-4RFN吸附性能的影响,吸附过程可用Freundlich模型来描述.     

黄河口海域沉积物对重金属的吸附

以黄河口海域表层沉积物为研究对象,研究沉积物对重金属Cu、Pb的吸附特性,将沉积物筛分为4种粒级,探讨粒度、pH值、吸附时间和吸附剂初始浓度对重金属吸附的影响。结果表明:沉积物粒径越小,对重金属的吸附量越大;吸附平衡时间有所差异,但在1.5h均能达到吸附平衡;吸附量均随pH值升高而逐渐增加,但铜的吸附较铅的吸附速度快;铜的吸附量与吸附剂初始浓度呈线性关系,而铅的吸附量在初始浓度较低时变化明显,随初始浓度增加吸附量增加减小;沉积物对铜吸附等温线符合Langmuir型,铅吸附等温线符合Freundlich型,吸附类型存在差异。重金属在沉积物中的吸附规律研究为黄河口海域污染调查及治理提供了科学依据。     

羧乙基壳聚糖蒙脱石吸附养殖水体中Cu2+的应用

为了寻求性能良好、环保吸附剂,用于去除养殖水体中重金属Cu~(2+),作者利用蒙脱石负载羧乙基壳聚糖制备成复合吸附剂,并利用IR、SEM、XRD等手段分析其表面性能,将其用于处理Cu~(2+)溶液,考察了环境因子对其吸附性能的影响,并从吸附动力学和吸附热力学角度分析吸附剂对Cu~(2+)的吸附机理,最后考察其再生利用效果。结果表明:羧乙基壳聚糖成功进入到蒙脱石层间;在羧乙基壳聚糖与蒙脱石质量比为1︰25、40℃恒温水浴搅拌60min、pH=6.0、最佳投加量为4.0g/L、处理浓度不超过30 mg/L Cu~(2+)溶液时,复合吸附剂对Cu~(2+)去除率可以达到96.23%,将其用于淡水养殖鱼塘水体中, Cu~(2+)去除后可达到《渔业水质标准》规定;吸附剂对Cu~(2+)吸附热力学实验结果表明,符合Langmuir模型,反应过程为自发、吸热反应;吸附动力学结果表明该吸附符合准二级动力学方程,反应属于化学吸附;再生实验中NaOH的再生效果优于HCl。     

水合氧化钛的结构及其在海水中的提铀性能

海水提铀的研究已将近有二十年的历史.由于海水体系复杂、且其中含铀量甚微(～3μg/l),致使其研究工作难度较大,目前,仍处在实验性阶段.水合氧化钛(或称“钛胶”)是一种提铀性能较好的,目前被普遍采用的无机提铀吸附剂(或称无机离子交换剂).它对海水中铀的吸附机制,无疑是个重要的,因而也是个为人们所重视的研究课题.这个问题的研究一般要从下述三方面着手:吸附剂的结构及其提铀性能;铀在海水中的存在形式及其影响因素,以及其吸附动力学和机理问题.本文先就前一个问题进行探讨,其它问题准备以后另文讨论.     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

A Review of Some Environmental Issues Affecting Marine Mining

This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.     

Increased Particle Fluxes at the INDEX Site Attributable to Simulated Benthic Disturbance

Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Determination of In Situ Sediment Shear Strength from Advanced Piston Corer Pullout Forces

The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.