中非铜钴成矿带地质特征与找矿前景分析

[研究目的]横跨刚果(金)和赞比亚边境地区的中非铜钴成矿带是世界上著名的沉积岩层控型铜钴成矿带,是全球第三大铜产地和第一大钴产地,然而其成矿规律和成矿潜力仍不明朗.[研究方法]本文通过对中非铜钴成矿带地质背景、构造演化与成矿、矿床时空分布规律、矿床模型等方面的研究,选择地层、构造、地球化学、遥感蚀变等与成矿密切相关的地...     

基于红外光谱技术研究内蒙古乌奴格吐山斑岩铜钼矿蚀变和矿化特征

近年来,红外光谱技术在矿物学研究、地质勘探与找矿等方面发挥了重要作用。本文通过测量与分析内蒙古乌奴格吐山斑岩铜钼矿Z661钻孔岩心短波红外和热红外波段的光谱,快速厘定了该矿床的蚀变矿物类型及组合特征。结果表明:乌奴格吐山斑岩铜钼矿床蚀变矿物主要有石英、钾长石、绢云母、伊利石、高岭石和蒙脱石等。蚀变矿物组合在空间上呈现出明显的分带性,其中石英+伊利石+绢云母+钾长石与矿化关系最为密切,可作为找矿的标型矿物组合;结合钻孔Cu、Mo矿化分布特征,发现绢(白云母)2200nm处吸收峰位置的波长偏移与成矿中心距离有关,波长变小,更趋向于成矿中心;且伊利石结晶度(IC)越大,结晶度较高,矿化程度强。因而,该技术方法通过蚀变矿物波谱,能够快速圈定斑岩铜钼矿蚀变矿物组合,进而提高勘查效率。     

西藏甲玛矿床磁黄铁矿微量元素特征及其与金富集沉淀的耦合机制

【研究目的】甲玛矿床是西藏冈底斯成矿带最重要的斑岩成矿系统之一,具有斑岩、矽卡岩、角岩、脉状金矿四位一体矿体结构,形成了丰富的矿物种类和多样的金属矿化。其中,磁黄铁矿作为重要的金属矿物之一,其矿物地球化学特征以及与金矿化的耦合关系一直不明确。【研究方法】此次,以甲玛斑岩成矿系统外围和远端的不同产状的磁黄铁矿为研究对象,基于详细的野外地质调查和镜下鉴定,通过激光剥蚀电感耦合等离子质谱分析方法（LAICP-MS）对不同产状的磁黄铁矿开展测点分析和扫描分析,详细揭示其地球化学特征。【研究结果】结果显示,甲玛矿床磁黄铁矿主要富集Co、Ni、Cu、Zn、Ge、Se,弱富集Pb、Bi、Sb、Te、Ag、As,而Mo、Cd、In、Sn、Ba、W、Au、Tl、Th、U等元素含量较低。其中,矽卡岩中的磁黄铁矿具有较高的Co/Ni比值,能有效揭示其岩浆热液成因,而角岩中磁黄铁矿可能继承了一定的沉积特征。【结论】甲玛矿区磁黄铁矿的Cu、Zn、Pb含量变化特征与矿床空间矿化规律一致。矽卡岩中的块状磁黄铁矿与金矿化关系密切,金主要呈他形、不规则的独立金矿物产于磁黄铁矿的孔隙和粒间。同时,金的富集和沉淀可能与富铋的熔体有关。创新点：磁黄铁矿是甲玛超大型斑岩成矿系统中典型的金属矿物之一,其微区原位分析清晰揭示其微量元素地球化学特征和矿物成因,同时,证实矽卡岩中磁黄铁矿的高品位金与成矿流体中的富铋熔体有关。     

Zircon U–Pb Age and Deformation Characteristics of the Jiama Porphyry Copper Deposit,Tibet: Implications for Relationships between Mineralization,Structure and Alteration

The Jiama copper deposit is one of the largest deposits recently found in Tibet and is composed of three types of mineralization including skarn, hornfels and porphyry. To investigate the relationship between mineralization, structure and alteration, we report new zircon U–Pb age and present field observations on the deformation characteritics associated with the copper mineralization in Jiama. Two main periods of deformation were identified, represented by D₁ and D₂ in Jiama. The first deformation (D₁) occurred around 50 Ma, whereas the second deformation (D₂) that was closely related to mineralization occurred later. Previous zircon U–Pb and molybnite Re–Os dating results indicate that the mineralizatoin occurred at ～15 Ma and thus the D₁ regional deformation significantly occurred before the mineralization time, although the D₁ deformation probably provided important space for the development of significant copper deposition. Our new mapping and observations on the D₂ deformation demonstrate that the mineralization was closely coeval with or slightly later than the time of D₂ deformation. The new U–Pb zircon age further indicates that the aplite formed in ～17.0 Ma and thus the D₂ deformation happened later than this time because the D₂ deformation cut across the aplite, which is proposed to be the key control for copper mineralization. Altered laminated hornfels including three types of alteration (A‐, K‐ and S‐type) were found spatially associated with the D₂ deformation. The type‐A is mainly silicification, with fine sericite or chlorite, as well as abundant disseminated sulphides on fracture surfaces; the type‐S is mainly fine‐grained silicification with patches of chlorite, epidote and common sulphides; the type‐K (potassic alteration) appears to be fine‐grained biotite. Such types of alteration indicate the presence of skarns at depth where ore shoots are located. Taken together, the multiple structural‐magmatic‐mineralization events contributed to the formation of the supergiant Jiama porphyry copper deposit in Tibet. The results have general implication for regional exploration.     

新疆额尔齐斯构造带哲兰德金矿白云母~(40)Ar/~(39)Ar同位素年龄及地质意义

哲兰德金矿是额尔齐斯构造带上重要的造山型金矿,产出于韧性剪切带中,金矿化赋存于黄铁矿化闪长岩脉、含金石英脉和黄铁矿化千枚岩中,矿化与韧脆性剪切变形有关。沿剪切面理发育的白云母、绿泥石等新生矿物,为测定金矿形成时代提供了依据。本研究利用白云母~(40)Ar/~(39)Ar年代学手段,确定了韧性剪切带的形成时代和金成矿时代。结果表明白云母坪年龄为295. 4±1. 6 Ma,韧性剪切变形和金成矿作用发生在295 Ma,略早于多拉纳萨依金矿形成时间。结合前人资料认为,新疆额尔齐斯构造带造山型金矿形成于295～270 Ma。     

Genetic Environment of the Intrusion-related Yuryang Au-Te Deposit in the Cheonan Metallogenic Province, Korea

Abstract. The Yuryang gold deposit, comprising a Te‐bearing Au‐Ag vein mineralization, is located in the Cheonan area of the Republic of Korea. The deposit is hosted in Precambrian gneiss and closely related to pegmatite. The mineralized veins display massive quartz textures, with weak alteration adjacent to the veins. The ore mineralization is simple, with a low Ag/Au ratio of 1.5:1, due to the paucity of Ag‐phases. Ore mineralization took place in two different mineral assemblages with paragenetic time; early Fe‐sulfide mineralization and late Fe‐sulfide and Au‐Te mineralization. The early Fe‐sulfide mineralization (pyrite + sphalerite) occurred typically along the vein margins, and the subsequent Au‐Te mineralization is characterized by fracture fillings of galena, sphalerite, pyrrhotite, Te‐bearing minerals (petzite, altaite, hessite and Bi‐Te mineral) and electrum. Fluid inclusions characteristically contain CO₂ and can be classified into four types (Ia, Ib, IIa and IIb) according to the phase behavior. The pressure corrected temperatures (≥500d?C) indicate that the deposit was formed at a distinctively high temperature from fluids with moderate to low salinity (<12 wt% equiv. NaCl) and CH₄ (1?22 mole %). The sphalerite geo‐barometry yield an estimated pressure about 3.5 ?2.1 kbar. The dominant ore‐deposition mechanisms were CO₂ effervescence and concomitant H₂S volatilization, which triggered sulfidation and gold mineralization. The measured and calculated isotopic compositions of fluids (δ¹⁸O_H2^O = 10.3 to 12.4 %o; δD_H2^O = ‐52 to ‐77 %o) may indicate that the gold deposition originated from S‐type magmatic waters. The physicochemical conditions observed in the Yuryang gold deposit indicate that the Jurassic gold deposits in the Cheonan area, including the Yuryang gold deposit are compatible with deposition of the intrusion‐related Au‐Te veins from deeply sourced fluids generated by the late Jurassic Daebo magmatism.     

福建霞浦大湾钼铍矿区碱长花岗岩LA-ICP-MS锆石U-Pb测年研究

福建霞浦大湾钼铍矿床产于火山岩区,但成矿作用可能与岩浆活动和裂隙构造关系密切。为查清矿区隐伏的钠长石化碱长花岗岩与钼铍矿成矿作用之间的关系,本文运用激光剥蚀电感耦合等离子体质谱法(LA-ICP-MS)对碱长花岗岩进行锆石U-Pb测年研究,获得年龄结果为93. 0±0. 6 Ma,与矿区的辉钼矿成矿年龄(92. 2±1. 3 Ma)一致,表明碱长花岗岩与钼铍矿成矿作用时空上具有密切的成因联系,岩浆活动可能为矿区钼铍矿的形成提供了成矿物质和成矿流体。结合区域上的成岩成矿年代学数据,本研究认为福建省燕山期岩浆活动时代与钼铍矿成矿时代都具有从西向东逐渐变新的时空分布规律,钼铍矿的成矿地质构造背景为燕山期华南岩石圈伸展环境。     

Morphology and kinematics of boudinage vein systems,Great Keppel Island,Queensland

Strongly boudinaged sandstone beds in a Palaeozoic accretionary complex are exposed on Great Keppel Island, off the central Queensland coast. Viewed in profile, the boudins are folded around mesoscopic F₂ hinge zones and overprinted by S₂ foliation indicating formation either during Late Carboniferous subduction accretion (D₁) or during a previously unrecognised discrete early phase of the Permian deformation (D₂). Boudin profiles record an average stretch of 1.51, although the contribution of D₂ and later deformation is not determined. Viewed in the plane of bedding, vein traces are variable and oblique to boudin necks by an average of 12° anticlockwise. The overall en echelon arrangement of veins in boudin necks is a primary feature of the structure and cannot be attributed to later deformation. This pattern of veining indicates oblique extension of the boudin necks by low‐vorticity non‐coaxial flow within the plane of bedding. One possible setting with such kinematics is the limb of a non‐cylindrical fold.     

Episodes of Cenozoic Gold Mineralization on the Eastern Margin of the Qinghai-Tibet Plateau:~(40)Ar/~(39)Ar Dating and Implication for Geodynamic Events

A lot of new gold deposits have been found on the eastern margin of the Qinghai-Tibet Plateau during the past two decades. Among them, three main types of gold deposits have been recognized, including quartz-vein-type, shearzone-type and porphyry-type. The former two types of gold deposits are mainly hosted within metamorphic rocks, while the latter is related to Cenozoic magmatism. Although all of these gold deposits are believed to have been formed during the uplift process of the Qinghai-Tibet Plateau in the Cenozoic era (Wang et al., 2002b), precise isotopic age constraints have still been lacking until quite recently. This paper presents new ^40Ar/^39Ar data of some gold deposits on the eastern margin of the Qinghai-Tibet Plateau, which indicate that gold mineralization in the region occurred in response to the episodic stages of the orogenies. Recently obtained ^40Ar/^39Ar data on quartz and feldspars from several gold deposits, such as the Sandiao deposit, the Baijintaizi deposit, the Pusagang deposits, provide new constraints on gold mineralization on the eastern margin of the Qinghai-Tibet Plateau. Geochronological studies of gold deposits along the Daduhe River indicate that there are three stages of gold mineralization. The early two stages occurred as early as 65.1 Ma in the Shuibaiyang deposit and 58.95 Ma in the Ruoji deposit, while the latter stage occurred as late as 25.35 Ma in Baijintaizi and 24.70 Ma in Sandiao. Isotopic dating of three plagioclases from the Beiya deposit, Zhifanggou deposit and Luobodi deposit and a K-feldspar from the Jinchangqing deposit in Yunnan Province indicates that these deposits were formed at two stages. The Zhifanggou and Jinchangqing deposits have early stage records as old as 58.82 Ma in Zhifanggou and 55.49 Ma in Jinchangqing, but all of the above four deposits in Yunnan have late stage records of 23.18 Ma in Jinchangqing, 24.54 Ma in Zhifanggou, 24.60 Ma in Luobodi and 24.56 Ma in Hongnitang. The above results suggest that the gold deposits on the eastern margin of the Qinghai-Tibet Plateau were formed concentratedly at two main episodes, i.e. the end of the Paleocene (about 58 Ma) and the boundary between the Paleogene and the Neogene (about 25 Ma). The later episode appears to be looks like more important and was coupled with the Sichuan movement, which was extensively activated at that period. The beginning of the Cenozoic Era (about 65 Ma) might be another episode of gold mineralization, but only one deposit (Shuibaiyang) in this study has been proved to have been be formed at this stage and might be earlier than the initial collision between the Indian Plate and the Eurasia Plate. In view of geology, the above three episodes of gold mineralization are associated with three events of tectonicmagmatism and/or fluid events. Even though the gold deposits (for example, the Shuibaiyang deposit, Ruoji deposit and Pusagang deposit) were formed at different episodes, all of them are genetically related to tectonic movements in largescale shear zones. It looks like theat tectonic events (including large-scale strike-slip) between Paleogene and Neogene had a wide influence upon gold mineralization, with new deposits formed and old deposits enriched or superimposed to be a higher grade by new stage of mineralization. The above data suggest that gold deposits were not only concentrated in some areas, but also formed mainly at different boundaries of geological times, indicating that there existed some peak stages of gold mineralization (metallogenic episodes), and that the gold deposits were formed mainly by episodic mineralization.     

Timing of mineralization and deformation,Peak Au mine,Cobar, New South Wales∗

The ⁴⁰Ar/³⁹Ar dating of alteration muscovite from the Peak Au mine in the Early Devonian Cobar Basin, New South Wales, has distinguished two major episodes of mineralization. Veined (Pb‐Zn‐Cu‐Au) mineralization was broadly synchronous with cleavage formation during the post‐inversion, shortening deformation of the basin sedimentary rocks, and replacive Ag‐Pb‐Zn mineralization significantly postdates the latter event. Veined base metals (Pb‐Zn‐Cu) and Au associated with silicification were coeval with three stages of cleavage formation (D₁, D₂ and D₃) after basin inversion. The Cu‐Au phase of mineralization at the Peak Au mine which was broadly contemporaneous with the culmination of the cleavage‐forming events (D₃) and with the local development of high‐strain zones occurred at 401.5 ± 1.0 Ma (⁴⁰Ar/³⁹Ar on muscovite). This date is essentially coeval with known fossil constraints on the age of basin formation, and indicates that basin inversion and deformation rapidly followed sedimentation. In contrast, replacive Ag‐Pb‐Zn mineralization occurred at 384.0 ± 1.4 Ma (⁴⁰Ar/³⁹Ar on muscovite) during an extended period of relaxation characterized by normal faulting (D₄) which followed the shortening deformation. This mineralization was associated with desilicification and chlorite‐muscovite replacement assemblages which cross‐cut the cleavages, and which may have been broadly contemporaneous with the deposition of part of the Mulga Downs Group which unconformably overlies the Cobar Supergroup. Rhyolite exposed in the core of the Peak Au mine largely contains inherited zircons that range in age from ～430–1500 Ma. A few euhedral zircons have an age of ～430 Ma and this is interpreted as a maximum date for the rock. Zircons from a syn‐D₃ chlorite‐muscovite replacement zone within the deposit have ²⁰⁶Pb/²³⁸U ages of ～410–650 Ma and are apparently inherited.     

Geology, Ar-Ar Age and Mineral Assemblage of Eocene Skarn Cu-Au±Mo Deposits in the Southeastern Gangdese Arc, Southern Tibet: Implications for Deep Exploration

Abstract. Medium‐ and large‐scaled skarn Cu‐Au±Mo deposits, e.g. Kelu, Liebu, Chongmuda and Chenba among others, are distributed in Shannan area of the Gangdese Cu‐Au metallogenic belt. Intrusions‐related skarn copper mineralization belongs to high K and calc‐alkaline rock series, located in late collision volcano‐magmatic arc and formed between 20 to 30 Ma. Copper mineralization occurs at exocontact zone of the lower Cretaceous Bima Group carbonate and other calcareous‐bearing sedimentary rocks with intrusions. At present, three main mineralization types are identified, including skarn type, hydrothermal vein type and porphyry type. Mineralizing associations are Cu‐Mo, Cu‐Au and Cu. In ore districts, those mineralization types form an entire porphyry‐skarn Cu‐Au±Mo ore‐forming system. Alterations of the exocontact are mainly skarnization and hornfelsization, while the alterations of the endocontact are mainly sericitization, silicification, and chloritization of intrusion. In the study area, the endoskarn is not well developed. Copper mineralization occurs mainly in the exocontact in the form of stratoid, lenticular and pockety ore body. Veined mineralization can be seen in marblized and hornfelsed siltstone, being away from the contact zone. In the endocontact, the mineralization is mainly veinlet‐like and disseminated. In Shannan area, skarnization can be divided into early skarnization stage and late hydrous silicate stage. The early skarnization stage is featured by mainly andradite and grossular skarn, containing minor diopside, hedenbergite, magnetite and some copper minerals; and the late hydrous silicate stage is of replacement of garnet skarn by chlorite, epidote, quartz and calcite together with sulfides precipitation. The latter is the main stage of copper mineralization. Bornite is the dominant ore mineral associated with minor chalcopyrite and pyrite; and gold as well as silver are distributed in bornite and wittichenite. Results of microthermometry study of fluid inclusions in quartz of late hydrous silicate stage from different deposits show intermediate temperature and low to intermediate‐salinity features for all samples. The dominant inclusion type is composed of two phases, being about 4 to 15 % vapor and 85 to 96 % liquid at room temperature. Homogenization temperatures range from 232 to 335d?C. Salinities have been recorded between 4.2 and 15.5 wt% NaCl equivalent. Boiling fluid inclusions are not identified and it indicates that metal deposition mainly resulted from water‐rock reactions. The results of sulfur isotope analysis indicate that the sulfur isotope values (δ³⁴S 1.29–1.68 %o) of the samples collected from skarns are similar with that from the endocontact (δ³⁴S 1–1.75 %o). Both of them have very close sulfur isotope values (near δ³⁴S 0 %o), which indicate the sulfur of both the skarn type and the porphyry type mineralization was from deep sources. Ages determined on biotite from ore‐bearing intermediate porphyries by Ar‐Ar methods range from 23.77±0.29 to 29.88±0.56 Ma, showing that skarn copper mineralization in the study area evidently is older than the porphyry Cu(‐Mo) mineralization in Gangdese, and likely representing another metallogenic event. The Cu‐Au skarn deposits in the Kelu‐Liebu‐Chongmuda belt are interpreted as the shallow level, skarn‐related deposits in a porphyry‐skarn mineralization. Appearance of porphyry copper mineralization in some skarn deposits implies that skarn copper mineralization of the study area resemble to those in northern sub‐metallogenic belt, having uniform porphyry‐skarn ore‐forming system. Therefore, it is presumed there should be potential to find deep level porphyry‐type Cu‐Au mineralization targets.     

Characteristics of Breccias and C-O-Sr-S Isotope Geochemistry of the Duocaima Pb-Zn Deposit in Tuotuohe, Qinghai Province: Implications for the Ore-forming Process

The Duocaima carbonate-hosted Pb-Zn deposit is a newly found large deposit in the southern area of Qinghai Province.In this paper, the characteristics, genesis, significance to Pb-Zn mineralization of the widely developed breccias, and the ore-forming process have been carefully studied based on geological documentation of drilling holes, microscopic observations of petrography and microstructure and some stable isotope measurements.Based on the compositions of the clast and matrix, the breccias can be classified into three types: limestone clasts cemented by marl; limestone clasts with fine-grained calcareous materials; and limestone clasts cemented by hydrothermal calcite.The mineralization in the first type of breccia is weak, whereas it is strong in the latter two types of breccias.According to the locations of occurrence and structural characteristics of the breccias along with the relationship between the breccias and mineralization, part of the limestone clasts that are cemented by marl and outcrop in the contact zone between the Wudaoliang Formation(Nw) and the underlying Jiushidaoban Formation(Pj) are attributed to synsedimentary fault-genetic breccia, whereas the last of the limestone clasts that are cemented by marl and developed in the Jiushidaoban Formation(Pj) are attributed to the breccia generated by karst cave collapse; the limestone clasts with fine-grained calcareous materials and the limestone clasts cemented by hydrothermal calcite are attributed to breccia formed by hydrothermal dissolution.The breccia formed by karst collapse had consistently evolved for a long period of time, while the breccias with other origins were formed around the period of mineralization(i.e., about or slightly later than 20–16 Ma).The breccia generated by karst cave collapse and hydrothermal dissolution are somewhat related; the formation of the breccia from karst cave collapse provided open space for the later mineralization and reaction between hydrothermal fluids and host rocks, and the subsequent strong dissolution by hydrothermal fluids transformed some of the breccia formed earlier by karst cave collapse.Meanwhile, carbonate host rocks with breccias and brecciaed mineralization can be a potential sign of Mississippi Valley Type(MVT) deposits and important indicators for regional mineral exploration.The δ13CV-PDB, δ18OVSMOW, and 87Sr/86 Sr values of hydrothermal calcite in the Duocaima deposit range from 4.3‰ to 7.1‰, 14.9‰ to 20.1‰, and 0.707494 to 0.708185, respectively; the δ13CV-PDB, δ18OV-SMOW, and 87Sr/86 Sr values of the host limestones of the Jiushidaoban Formation range from 3.6‰ to 5.3‰, 18.0‰ to 20.5‰, and 0.707372 to 0.707945, respectively.The δ13CV-PDB and 87Sr/86 Sr values of hydrothermal calcite and limestone are similar, indicating single sources of C and Sr in this deposit, with the likely source being the limestone of the Jiushidaoban Formation.The minor scattering of the δ18OV-SMOW values suggests that different O isotope fluids underwent the isotope exchange reaction.The C-O-Sr isotope characteristics indicate that the host limestones experienced a dissolution and precipitation process during mineralization, which is beneficial to improving the porosity of host rocks and promoting the precipitation of metal sulfides.The δ34SV-CDT value of the breccia-type mineralization sulfides ranges from-30.4‰ to-0.3‰; that is, the δ34SV-CDT value is negative with considerable variation, illustrating that during the breccia-type mineralization process, the bacteriogenic reduction of sulfates provided the vast majority of sulfur, whereas the thermochemical reduction of sulfates was relatively unimportant.The brecciation that occurred as a result of karst cave collapse was mainly generated by the dissolution of groundwater; however, the brecciation related to hydrothermal dissolution and mineralization processes were caused by mixing of different fluids.     

^40Ar-^39Ar Isotopic Dating of the Xianghualing Sn-polymetallic Orefield in Southern Hunan, China and Its Geological Implications

The Xianghualing Sn-polymetallic orefield in Hunan Province, southern China, is a large-size tin orefield. Although numerous studies have been undertaken on this orefield, its genesis, mineralization age, and tectonic setting are still controversial, mainly because of the lack of reliable geochronological data on tin mineralization. The 40Ar/39Ar stepwise heating dating method was first employed on muscovite from different deposits in this orefield. The muscovite sample from the Xianghualing Sn-polymetallic deposit defines a plateau age of 154.4±1.1 Ma and an isochron age of 151.9±3.0 Ma; muscovite from the Xianghuapu W-polymetallic deposit yields a plateau age of 161.3±1.1 Ma and an isochron age of 160.0±3.2 Ma; muscovite from the Jianfengling greisen-type Sn-polymetallic deposit gives a plateau age of 158.7±1.2 Ma and an isochron age of 160.3±3.2 Ma. The tungsten-tin mineralization ages in the Xianghualing area are therefore restricted within 150-160 Ma. The tungsten -tin mineralization in Xianghualing occurred at the same time as the regional tin-tungsten mineralization including the Furong tin orefield, Shizhuyuan tungsten-tin polymetallic deposit and Yaogangxian tungsten-polymetallic deposit. Thus, the large-scale tungsten-tin metallogenesis in South China occurring at 160-150 Ma. probably is closely related to asthenospheric upwelling and crust-mantle interaction under a geodynamic setting of crustal extension and lithosphere thinning during the transformation of tectonic regimes during the Mid-Late Jurassic.     

Geology and inclusion studies on the genesis of the Baolun gold deposit in Hainan Province,South China

The late Triassic Baolun gold deposit hosted by Silurian phyllites is a large‐scale high‐grade gold deposit in Hainan Island, South China. The ores can be classified into quartz‐vein dominated type and less altered rock type. Three mineralization stages were recognized by mineral assemblages. The early stage, as the most important mineralization stage, is characterized by a quartz–native gold assemblage. The muscovite?quartz?pyrite?native gold assemblage is related to the intermedium mineralization stage. In late mineralization stage, native gold and Bi‐bearing minerals are paragenetic minerals. Microthermometry analyses show that the early mineralization stage is characterized by two types of fluid inclusions, including CO₂‐rich inclusions (C‐type) and aqueous inclusions (W‐type). C‐type inclusions homogenize at 276–335°C with an averaged value of 306°C and have salinities of 1.0–10.0 wt% NaCl equivalent (mean value of 4.9 wt% NaCl equivalent). W‐type inclusions homogenize at 252–301°C (mean value of 278°C) with salinity of 4.0–9.7 wt% NaCl equivalent (mean value of 7.4 wt% NaCl equivalent). In intermedium mineralization stage, C‐type and W‐type inclusions homogenize at 228–320°C (mean value of 283°C) and 178–296°C (mean value of 241°C), with salinities of 2.4–9.9 wt% NaCl equivalent (mean value of 6.5 wt% NaCl equivalent) and 3.7–11.7 wt% NaCl equivalent (mean value of 7.7 wt% NaCl equivalent), respectively. No suitable mineral, such as quartz or calcite, was found for fluid inclusion study from late mineralization stage. In contrast, only aqueous inclusions were found from post‐ore barren veins, which yielded lower homogenization temperatures ranging from 168–241°C (mean value of 195°C) and similar salinities (2.6–12.6 wt% NaCl equivalent with averaged value of 7.2 wt% NaCl equivalent). The different homogenization temperatures and similar salinities of C‐type and W‐type from each mineralization stage indicate that fluid immiscibility and boiling occurred. The Baolun gold deposit was precipitated from a CO₂‐bearing mesothermal fluid, and formed at a syn‐collision environment following the closure of the Paleo‐Tethys.     

Geology, Fluid Inclusion and Isotopic Study of the Neoproterozoic Suoi Thau Copper Deposit, Northwest Vietnam

The Sin Quyen-Lung Po district is an important Cu metallogenic province in Vietnam, but there are few temporal and genetic constraints on deposits from this belt. Suoi Thau is one of the representative Cu deposits associated with granitic intrusion. The deposit consists of ore bodies in altered granite or along the contact zone between granite and Proterozoic meta-sedimentary rocks. The Cu-bearing intrusion is sub-alkaline I-type granite. It has a zircon U-Pb age of ~776 Ma, and has subduction-related geochemical signatures. Geochemical analysis reveals that the intrusion may be formed by melting of mafic lower crust in a subduction regime. Three stages of alteration and mineralization are identified in the Suoi Thau deposit, i.e., potassic alteration; silicification and Cu mineralization; and phyllic alteration. Two-phase aqueous fluid inclusions in quartz from silicification stage show wide ranges of homogenization temperatures(140–383℃) and salinities(4.18wt%–19.13wt%). The high temperature and high salinity natures of some inclusions are consistent with a magmatic derivation of the fluids, which is also supported by the H-O-S isotopes. Fluids in quartz have δD values of –41.9‰ to –68.8‰. The fluids in isotopic equilibrium with quartz have δ~(18)O values ranging from 7.9‰ to 9.2‰. These values are just plotted in the compositional field of magmatichydrothermal fluids in the δD_(water) versus δ~(18)O_(water) diagram. Sulfide minerals have relatively uniform δ~(34)S values from 1.84‰ to 3.57‰, which is supportive of a magmatic derivation of sulfur. The fluid inclusions with relatively low temperatures and salinities most probably represent variably cooled magmatic-hydrothermal fluids. The magmatic derivation of fluids and the close spatial relationship between Cu ore bodies and intrusion suggest that the Cu mineralization most likely had a genetic association with granite. The Suoi Thau deposit, together with other deposits in the region, may define a Neoproterozoic subduction-related ore-forming belt.     

四川甲基卡稀有金属矿床134号脉锡石U-Pb定年与地质意义

伟晶岩型锂矿是重要的新兴产业资源,具有重要的战略价值,是我国亟需紧缺的关键矿产.然而,成矿年代学制约了该类型锂矿的成矿作用和成矿机理研究.四川甲基卡稀有金属矿床是我国最大的锂矿床,以134号伟晶岩脉为典型代表.134号伟晶岩脉主要由锂辉石、钽铌铁矿、锆石、曲晶石、绿柱石、锡石、微斜长石、正长石、石英、白云母等组成.本文...     

基于红外光谱技术研究云南普朗斑岩铜矿的蚀变和矿化特征

近年来红外光谱技术作为一种绿色、快速、无损、精确探测矿物的技术手段而倍受关注,针对斑岩型矿床蚀变矿物高度叠加、蚀变分带界线不明显、细粒蚀变矿物多、黏土蚀变矿物多等特征,该技术在蚀变矿物识别和勘探信息解读等方面优势突出。本文应用红外光谱技术对云南普朗斑岩铜矿区钻孔ZK1801岩心进行矿物识别和蚀变分带划分的研究,识别出钾硅酸盐化带、绿帘石-绿泥石化带、绿泥石-伊利石化带、石英-伊利石化带和泥化带。研究表明:普朗铜矿整个钻孔的蚀变矿物主要有石英、钾长石、绢云母、绿泥石、绿帘石、高岭石、蒙脱石、伊利石等;根据矿化特征,发现铜矿体广泛赋存在钾硅酸盐化带和绿帘石-绿泥石化带中,与矿化关系密切的蚀变矿物"石英+钾长石+绢云母"和"绿帘石+绿泥石",可以作为普朗矿床勘查的标型蚀变矿物组合;研究区广泛发育的绢云母Al—OH波长随钻孔深度增加而逐渐从2210～2205nm减小到2202～2198nm, Al—OH波长2210～2205nm(长波绢云母)与矿化关系密切,可以作为普朗矿床勘查的指示信息。     

Rb-Sr Dating of Pyrite and Quartz Fluid Inclusions and Origin of Ore-forming Materials of the Jinshan Gold Deposit,Northeast Jiangxi Province,South China

The Jinshan gold deposit is located in the Northeast Jiangxi province,South China,which related to the ductile shear zone.It contains two ore types,i.e.the alteration-type ore and the goldbearing quartz vein ore.Rb-Sr age dating is applied to both gold-bearing pyrite in the alteration-type ore and fluid inclusion in the gold-bearing quartz vein to make clear the time of the gold mineralization of the Jinshan deposit.Analytical results of this study yielded that the age of the alteration-type ore bodies is about 838±110Ma,with an initial 87Sr/86Sr value of 0.7045±0.0020.However,the age of the gold-bearing quartz vein-type ore is about 379±49Ma,and the initial 87Sr/86Sr is 0.7138±0.0011.Based on the age data from this work and many previous studies,the authors consider that the Jinshan gold deposit is a product of multi-staged mineralization,which may include the Jinninian,Caledonian,Hercynian,and Yanshanian Periods.Among them,the Jinninian Period and the Hercynian Period might be the two most important ore-forming periods for Jinshan deposit.The Jinninian Period is the main stage for the formation of alteration-type ore bodies,while the Hercynian Period is the major time for ore bodies of gold-bearing quartz vein type.The initial values of the 87Sr/86Sr from this study,as well as the previous isotope and trace element studies,indicate that the ore-forming materials mainly derived from the metamorphic wall rocks,and the ore-forming fluids mainly originated from the deep metamorphic water.     

Deformation of host rocks and stratiform mineralization in the Hilton Mine area,Mt Isa

The Hilton deposit is a deformed and metamorphosed Proterozoic stratiform Pb‐Zn‐Ag‐Cu deposit hosted by dolomitic and carbonaceous sediments of the Urquhart Shale of the Mt Isa Group. Rocks in the Hilton area show a history of folding and faulting which spans the time range recognized elsewhere in the Western Succession of the Mt Isa Inlier, though the effects of relatively late and brittle deformation are more pronounced in the Hilton area. The Hilton area shows intense faulting relative to similar rocks to the south in the Mt Isa‐Hilton belt. Faulting in the Hilton area has generally resulted in east‐west shortening and extension in both north‐south and vertical directions. This relatively intense late strain is attributed to the geometry of the Paroo Fault Zone, a major north‐trending zone that bounds the Hilton area to the west, and the Sybella Batholith, which formed a relatively rigid indenter during late deformation in the Hilton area. The structural history of the Hilton area is broadly consistent with ongoing east‐west shortening during progressive uplift from mainly ductile to more brittle conditions. Based on these observations, thinning of the Mt Isa Group which was previously attributed to synsedimentary faulting, can now be shown to be related to heterogeneous strain during late faulting. Sulphide layers show a history of folding which is similar to that of the surrounding rocks. Pyrite which is paragenetically associated with mineralization is overprinted by a bedding‐parallel foliation which predates all other structures in the area. This suggests that stratiform sulphide mineralization in the Hilton area predates deformation. Deformation has affected the Hilton orebodies at all scales. Changes in thickness and ‘fault windows’ in the orebody interval occur on the scale of the entire deposit. Mesoscopic ore thickness changes are often clearly related to extensional and contractional structures within sulphide layers. These macroscopic and mesoscopic ore‐thickness variations are spatially associated with cross‐cutting brittle faults, suggesting that strain incompatibility between brittle host rocks and more ductile ore layers played a major role in the present geometry and thickness of sulphide ores at Hilton.     

Geology and Lead-Isotope Study of the Baiyinnuoer Zn-Pb-Ag Deposit, South Segment of the Da Hinggan Mountains, Northeastern China

The Baiyinnuoer deposit (32.74 Mt ore with grades of 5.44% Zn, 2.02% Pb and 31.36 g t^?1 Ag), the largest Zn‐Pb‐Ag deposit in northern China, is hosted by crystalline limestone and slate of the Early Permian Huanggangliang Formation. Detailed cross‐section mapping indicates stratigraphic and fold structural controls on the mineralization. The Zn‐Pb‐Ag mineralization is hosted predominantly by skarn, which occurs as bedding‐parallel lens that pinch out at the margins of the main economic zone. Three skarn stages are identified at the deposit: (i) garnet‐clinopyroxene; (ii) sulfides; and (iii) carbonate‐epidote. Lead isotopic compositions were determined for galena and sphalerite of the ores, whole rock samples of the Yanshanian granite and granodiorite, Permian marble and tuff, and Jurassic volcanic and subvolcanic rocks in and around the Baiyinnuoer area in order to discuss the sources of ore‐forming materials and the relationship between the ore formation and these whole rocks. Galena and sphalerite of the Baiyinnuoer ore have uniform isotopic ratios (²⁰⁶Pb/²⁰⁴Pb, 18.267–18.369; ²⁰⁷Pb/²⁰⁴Pb, 15.506–15.624; ²⁰⁸Pb/²⁰⁴Pb, 38.078–38.394) consistent with the granite and granodiorite (²⁰⁶Pb/²⁰⁴Pb, 18.252–18.346; ²⁰⁷Pb/²⁰⁴Pb, 15.504–15.560; ²⁰⁸Pb/²⁰⁴Pb, 38.141–38.320), whereas the ratios for Jurassic volcanic and subvolcanic rocks are variable and radiogenic (²⁰⁶Pb/²⁰⁴Pb, 18.468–18.614; ²⁰⁷Pb/²⁰⁴Pb, 15.521–15.557; ²⁰⁸Pb/²⁰⁴Pb, 38.304–38.375). These results indicate that the mineralization was not related to the Jurassic volcanism, but to the Yanshanian magmatism. The Permian strata may have a slight contribution to the mineralization. All features show that the Baiyinnuoer deposit is related to the Yanshanian granitic magmatism, and can be classified as a zinc‐lead‐silver skarn deposit.