共查询到20条相似文献,搜索用时 109 毫秒
1.
Most of the granitic residuals of the Wheat Belt of southwestern Western Australia are bornhardts, with some nubbins developed at the western margin and occasional poorly developed castellated forms. Their origin and age can be deduced from their structure and their relationship to a weathered (lateritic) land surface and various palaeochannels. The bornhardts are massive and most stand lower than local palaeosurface remnants. They are best interpreted as having formed by differential fracture density controlled weathering beneath the weathered land surface in pre‐Eocene times. They were exposed by the stripping of the regolith beginning in the Eocene. Many are clearly stepped, indicating that their exposure took place not all at once, but episodically. A few bornhardts stand higher than the weathered land surface. They pre‐date the Eocene and the stepped morphology preserved on some suggests that their crests are much older. 相似文献
2.
Flared slopes originate as concave weathering fronts beneath the regolith, and several other minor granite landforms found in association with them (tafoni, Rillen) may be initiated subsurface also. Other features, particularly incipient gnammas and gutters, have been observed on surfaces that have only recently been cleared of granite debris in situ. 相似文献
3.
Michael A. Velbel 《Geochimica et cosmochimica acta》2009,73(20):6098-6779
Naturally weathered olivine occurring as phenocrysts in Hawai’ian volcanic rocks from several volcanic centers and regolith/outcrop settings, and as tectonized olivines from several metadunite bodies in the southern Appalachian Blue Ridge, are all similarly corroded by natural weathering. Conical (funnel-shaped) etch pits occur as individual pits, base-to-base pairs of cone-shaped pits, or en echelon arrays. Etch-pit shapes and orientations in the smallest etch-pit arrays visible in conventional scanning electron microscopy resemble even smaller features previously reported from transmission electron microscope investigations of olivine weathering. Etch pits occur in samples with chemical and/or mineralogical evidence of weathering, and/or are associated with, or proximal or directly connected to, fractures or exposed outcrop surface, and therefore are formed by weathering and not inherited from pre-weathering aqueous alteration (e.g., serpentinization, iddingsitization) of these parent rocks. Many etch pits are devoid of weathering products. Natural weathering of olivine is surface-reaction-limited. Similarity of corrosion forms from naturally weathered olivine from multiple igneous and metamorphic parent-rock bodies suggests that olivine weathers in the same manner regardless of its specific crystallization/recrystallization history, eruption/weathering/exposure ages of the olivine’s host rock, and the local regolith history. 相似文献
4.
《Earth》2002,57(1-2):37-74
Two-stage development of landforms has been appreciated for more than two centuries with respect to minor features, and major forms and landscapes have been viewed in similar terms for almost a hundred years. Early workers understood the significance of fractures as passages for water and, hence, as avenues of weathering, the tendency for weathering to produce rounded forms, the progression of weathering from the surface downwards, weathering contrasts between wet and dry sites, contrasted erosive susceptibility of weathered and unweathered rock, and reinforcement effects. Forms of deep and shallow derivation can be differentiated.By whatever name it is known—etch, double planation, subcutaneous, or two-stage—the concept is one of the most fruitful developed in the last century, for it bears not only on the origin of a wide range of landforms, but also on the crucial role of water and weathering, the age of landforms and landscapes, palaeogeographic reconstructions, climatic geomorphology and theories of landscape development. 相似文献
5.
The Hill Country of Central Texas, USA, is undergoing rapid socioeconomic development, but environmental management of this
region is hampered by misconceptions about local bedrock, soils, terrain, and hydrologic processes. The Hill Country is underlain
mostly by Glen Rose Limestone (Lower Cretaceous) and exhibits a stepped terrain, which has been incorrectly attributed to
alternating hard and soft bedrock strata. Other characteristics mistakenly attributed to this landscape include thin soils
with scant water-retention capabilities, and rapid runoff as the dominant hydrologic process. This report presents new findings:
unweathered bedrock is well indurated, but interbeds exhibit variable weathering rates. Recessive slopes (“risers”) on this
stepped terrain result from rapid deterioration of strata having generally heterogeneous depositional fabrics (bioturbation
and irregular clay partings) in contrast to ledge-forming strata having homogeneous fabrics. A stony regolith is thus formed
beneath risers, providing porous and permeable ground that retards runoff and promotes the formation of moderately deep to
deep (two-tiered) regolith/soil zones. These surficial materials on local steep slopes compose important natural environmental
buffers; they support diverse biota and enhanced geochemical cycling of nutrients; they also exhibit significant water retention
and enhanced erosion abatement. Proper land management demands recognition of these attributes in the siting, design, and
construction of facilities. 相似文献
6.
Chemical weathering of silicate minerals has long been known as a sink for atmospheric CO2, and feedbacks between weathering and climate are believed to affect global climate. While warmer temperatures are believed to increase rates of weathering, weathering in cool climates can be accelerated by increased mineral exposure due to mechanical weathering by ice. In this study, chemical weathering of silicate minerals is investigated in a small temperate watershed. The Jamieson Creek watershed is covered by mature coniferous forest and receives high annual precipitation (4000 mm), mostly in the form of rainfall, and is underlain by quartz diorite bedrock and glacial till. Analysis of pore water concentration gradients indicates that weathering in hydraulically unsaturated ablation till is dominated by dissolution of plagioclase and hornblende. However, a watershed scale solute mass balance indicates high relative fluxes of K and Ca, indicating preferential leaching of these solutes possibly from the relatively unweathered lodgement till. Weathering rates for plagioclase and hornblende calculated from a watershed scale solute mass balance are similar in magnitude to rates determined using pore water concentration gradients.When compared to the Rio Icacos basin in Puerto Rico, a pristine tropical watershed with similar annual precipitation and bedrock, but with dissimilar regolith properties, fluxes of weathering products in stream discharge from the warmer site are 1.8 to 16.2-fold higher, respectively, and regolith profile-averaged plagioclase weathering rates are 3.8 to 9.0-fold higher. This suggests that the Arrhenius effect, which predicts a 3.5- to 9-fold increase in the dissolution rate of plagioclase as temperature is increased from 3.4° to 22 °C, may explain the greater weathering fluxes and rates at the Rio Icacos site. However, more modest differences in K and Ca fluxes between the two sites are attributed to accelerated leaching of those solutes from glacial till at Jamieson Creek. Our findings suggest that under conditions of high rainfall and favorable topography, weathering rates of silicate minerals in warm tropical systems will tend to be higher than in cool temperate systems, even if the temperate system is has been perturbed by an episode of glaciation that deposits regolith high in fresh mineral surface area. 相似文献
7.
《Applied Geochemistry》2002,17(3):321-336
Mineralogical, petrographical, and geochemical studies of the weathering profile have been carried out at Omai Au mine, Guyana. The area is underlain by felsic to mafic volcanic and sedimentary rocks of the Barama-Mazaruni Supergroup, part of the Paleoproterozoic greenstone belts of the Guiana Shield. Tropical rainy climate has favoured extensive lateritization processes and formation of a deeply weathered regolith. The top of the weathering profile consists of lateritic gravel or is masked by the Pleistocene continental-deltaic Berbice Formation. Mineralogical composition of regolith consists mainly of kaolinite, goethite and quartz, and subordinately sericite, feldspar, hematite, pyrite, smectite, heavy minerals, and uncommon mineral phases (nacrite, ephesite, corrensite, guyanaite). A specific feature of the weathering profile at Omai is the preservation of fresh hydrothermal pyrite in the saprolith horizon. Chemical changes during the weathering processes depend on various physicochemical and structural parameters. Consequently, the depth should not be the principal criterion for comparison purposes of the geochemical behavior within the weathering profile, but rather an index that measures the degree of supergene alteration that has affected each analyzed sample, independently of the depth of sampling. Thus, the mineralogical index of alteration (MIA) can provide more accurate information about the behavior of major and trace elements in regolith as opposed to unweathered bedrock. It can also aid in establishing a quantitative relationship between intensity of weathering and mobility (leaching or accumulation) of each element in each analyzed sample. At Omai, some major and trace elements that are commonly considered as immobile (ex: TiO2, Zr, etc.) during weathering could become mobile in several rock types and cannot be used to calculate the mass and volume balance. In addition, due to higher “immobile element” ratios, the weathered felsic volcanic rocks plotted in identification diagrams are shifted towards more mafic rock types and a negative adjustment of ∼20 units is necessary for correct classification. In contrast, these elements could aid in defining the material source in sedimentary rocks affected by weathering. Generally, the rare-earth element (REE) patterns of the bedrock are preserved in the saprolith horizon. This can represent a potentially useful tool for geochemical exploration in tropical terrains. Strong negative Ce and Tb anomalies are displayed by weathered pillowed andesites, which are explained by the influence of the water/rock ratio. 相似文献
8.
The southwestern region of Australia contains the Yilgarn Craton that has been exposed to subaerial weathering since mid-Proterozoic. The gently undulating landscape experienced lateritic weathering so that today variably dissected, deep in situ isovolumetrically weathered regolith is widespread. Imposition of a more arid climate since the Miocene with the cessation of effective external drainage has resulted in substantial geochemical modification of the highly porous regolith. This vast pore volume acts as a reservoir for complex solutions that may be highly saline, extremely acid to alkaline and reducing. Diverse precipitates have formed in the regolith including widespread occurrence of silcrete, calcrete, dolocrete, ferricrete and gypcrete together with localised occurrences of pyrite, alunite, jarosite, barite, halite and other salts. Clearing of bush land for agriculture in the 20th century increased recharge so that rising chemically active groundwaters are damaging farmland and infrastructure throughout the region. To cite this article: B. Gilkes et al., C. R. Geoscience 335 (2003). 相似文献
9.
Chemical and physical weathering in a hot‐arid,tectonically active alluvial system of Anza Borrego Desert,California
下载免费PDF全文
![点击此处可从《Sedimentology》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Investigation of chemical and physical weathering of bedrock and alluvial sediment in the Anza Borrego Desert, California, sheds light on weathering processes in hot‐arid systems and clarifies interpretations of climate from alluvial sediment. All of the alluvial sediment in the study area emanates from Cretaceous tonalite of the Peninsular Range, enabling exploration of the effects of external variables – climate, transport distance and tectonics – on the physical and chemical properties of the sediment. Chemical weathering in this area is dominated by plagioclase alteration observed in both bedrock outcrops and sediment, evinced most clearly by changes in the Eu anomaly. Biotite chemical weathering, manifested by interlayer K+ loss, is not evident in bedrock, but clearly observed in the sediment. Despite the weak intensity of chemical weathering (Chemical Index of Alteration = 56 to 62), fine‐grained (<63 μm) sediment displays a clear weathering trend in A–CN–K space and contains up to 25% clay minerals. Physical abrasion and grain‐size reduction in biotite during transport predominates in the sediment, whereas physical (insolation) weathering affecting bedrock is inferred from estimates of differential thermal expansion of mineral phases in response to extreme temperature changes in the study area. Chemical alteration and Brunauer–Emmett–Teller surface area both increase within the active Elsinore fault zone at the distal end of the depositional transect, reflecting tectonic‐induced fracturing and associated accelerated weathering. Extensive fracturing, together with a more humid Pleistocene climate, probably facilitated in situ bedrock weathering, preceding arid alluvial deposition in the Holocene. This study demonstrates that both climate and tectonic processes can affect chemical and physical weathering, resulting in alteration of plagioclase, leaching of K+ from biotite in the sediment and formation of clay minerals, even in hot, arid systems. 相似文献
10.
Chemical and physical weathering of primary minerals during the formation of laterite profiles in the Darling Range has formed distinct secondary mineral and morphological zones in the regolith. Erosion and human activity such as mining have exposed large areas of lateritic regolith, and its classification is important for land management, especially for mine rehabilitation. Preserved rock fabrics within regolith may enable the identification of parent rock type and degree of weathering, thus providing explanations for variations in important physical properties such as the strength and water retention of regolith. Feldspar, quartz, biotite and muscovite in porphyritic and fine-grained monzogranite in lateritic profiles have weathered via a series of gradational changes to form saprolite and pedolith consisting of kaolin, quartz, iron oxides, muscovite and gibbsite. Local reorganisation in the upper regolith or pedoplasmation zone has included illuviation of kaolin, which may be iron oxide-stained and which has disrupted the preserved rock fabric of saprock and saprolite. Quartz grain- or matrix-supported fabrics have developed, with greater pedoplasmation resulting in a quartz-grain-supported fabric. The recognition of these processes enables the use of gibbsite grainsize and distribution in regolith to infer original feldspar grainsize. Muscovite-rich or muscovite-deficient kaolin matrix indicates where plagioclase or alkali feldspar, respectively, was present in the parent rock. In some regolith, cementing by iron oxides has faithfully preserved rock fabric. The recognition of these various regolith types provides a basis for identifying the parent materials of lateritic regolith developed from granitic and doleritic rocks. Rock fabric is sometimes preserved in iron oxide-cemented bauxite mine floor regolith (Zh) due to the pseudomorphic gibbsite grains and iron oxide cement which forms a porous, rigid fabric. Plagioclase-rich granitoid is more likely to have weathered to dense clay-rich regolith (Zp), whereas albite and alkali feldspar have weathered to quartz-rich regolith (Zm) with the random orientation of quartz grains indicating that substantial reorganisation of rock fabric has occurred. It is possible to predict the response of regolith materials exposed in mine floors to management practices including ripping and re-vegetation, thus allowing targeted use of deep-ripping and planting density based on regolith type. 相似文献
11.
皖南地区花岗岩风化壳中稀土元素普遍富集,局部已成为矿床,其中,郎溪县姚村岩体风化壳富集程度较高。LA- ICP- MS锆石U- Pb定年表明,姚村花岗岩体的形成年龄为127.9±1.4 Ma,属于皖南地区燕山期晚期岩浆作用的产物。风化壳可细分为残坡积层(A)、强半风化层(C1)、过渡层(C2)、弱风化层(C3)和基岩(D)五层。稀土总量在纵向剖面上呈“波浪式”分布,各层稀土分布型式表现出对原岩的继承性。风化壳稀土配分型式与基岩一致, 富集LREE,轻重稀土分馏明显(La/Yb)N=15.6),但总含量明显更高。基岩∑REE为338×10-6,半风化层∑REE最高达642×10-6,富集约两倍。风化壳物质由风化残余主矿物(石英、钾长石、斜长石、黑云母)、黏土矿物(高岭石、埃洛石、伊利石、三水铝石等)和副矿物(锆石、磷灰石、榍石等)等组成。黏土矿物以伊利石含量最高,指示风化壳发育不成熟。REE与埃洛石含量明显正相关,与其他黏土矿物关系不明显。(含)稀土矿物(尤其是榍石)对风化壳中稀土元素的贡献量超过百分之五十,其次为斜长石,是风化壳中REE的重要来源。 相似文献
12.
《Geochimica et cosmochimica acta》1999,63(3-4):337-350
The paucity of weathering rates for quartz in the natural environment stems both from the slow rate at which quartz dissolves and the difficulty in differentiating solute Si contributed by quartz from that derived from other silicate minerals. This study, a first effort in quantifying natural rates of quartz dissolution, takes advantage of extremely rapid tropical weathering, simple regolith mineralogy, and detailed information on hydrologic and chemical transport. Quartz abundances and grain sizes are relatively constant with depth in a thick saprolite. Limited quartz dissolution is indicated by solution rounding of primary angularity and by the formation of etch pits. A low correlation of surface area (0.14 and 0.42 m2 g−1) with grain size indicates that internal microfractures and pitting are the principal contributors to total surface area.Pore water silica concentration increases linearly with depth. On a molar basis, between one and three quarters of pore water silica is derived from quartz with the remainder contributed from biotite weathering. Average solute Si remains thermodynamically undersaturated with respect to recently revised estimates of quartz solubility (<180 μM) but exceeds estimated critical saturation concentrations controlling the initiation of etch pit formation (>17–81 μM). Etch pitting is more abundant on grains in the upper saprolite and is associated with pore waters lower in dissolved silica. Rate constants describing quartz dissolution increase with decreasing depth (from 10−14.5–10−15.1 mol m−2 s−1), which correlate with both greater thermodynamic undersaturation and increasing etch pit densities. Unlike for many aluminosilicates, the calculated natural weathering rates of quartz fall slightly below the rate constants previously reported for experimental studies (10−12.4–10−14.2 mol m−2 s−1). This agreement reflects the structural simplicity of quartz, dilute solutes, and near-hydrologic saturation. 相似文献
13.
皖南地区花岗岩风化壳中稀土元素普遍富集,局部已成为矿床,其中,郎溪县姚村岩体风化壳富集程度较高。LA- ICP- MS锆石U- Pb定年表明,姚村花岗岩体的形成年龄为127. 9±1. 4 Ma,属于皖南地区燕山期晚期岩浆作用的产物。风化壳可细分为残坡积层(A)、强半风化层(C1)、过渡层(C2)、弱半风化层(C3)和基岩(D) 5层。稀土总量在纵向剖面上呈“波浪式”分布,各层稀土分布型式表现出对原岩的继承性。风化壳稀土配分型式与基岩一致, 富集LREE,轻重稀土分馏明显\[(La/Yb)N=15. 6\],但总含量明显更高。基岩∑REE为338×10-6,半风化层∑REE最高达642×10-6,富集约两倍。风化壳物质由风化残余主矿物(石英、钾长石、斜长石、黑云母)、黏土矿物(高岭石、埃洛石、伊利石、三水铝石等)和副矿物(锆石、磷灰石、榍石等)等组成。黏土矿物以伊利石含量最高,指示风化壳发育不成熟。REE与埃洛石含量明显正相关,与其他黏土矿物关系不明显。(含)稀土矿物(尤其是榍石)对风化壳中稀土元素的贡献量超过 50%,其次为斜长石,是风化壳中REE的重要来源。 相似文献
14.
During the Mesozoic and Paleogene, the Precambrian rocks in the Pilbara, Western Australia, underwent erosion and deep weathering that produced an undulating landform now represented by the duricrusted and partly eroded Hamersley Surface. A reddened, ferruginous weathering zone occurs immediately beneath this duricrusted surface. Oriented block samples of ferruginised strata of the Neoarchean–early Paleoproterozoic Hamersley Group exposed within approximately 15 m below the duricrust were collected at 20 sites in roadcuts along the Great Northern Highway between Munjina and Newman and exposures along the adjoining Karijini Drive. Stepwise thermal demagnetisation of cored specimens revealed a stable, high-temperature (680°C) component carried by hematite, with a mean direction (n = 55 specimens) of declination D = 182.0°, inclination I = 52.9° (α95 = 3.6°), indicating a pole position at latitude λp = 77.6°S, longitude ?p = 113.2°E (A95 = 4.3°) and a paleolatitude λ = 33.5 +3.6/–3.3°S. Both normal and reversed polarities are present, indicating that the remanent magnetism was acquired over an interval of at least two polarity chrons (say 105–106 years). Chi-square tests on the determined pole position and three different sets of Cenozoic poles, namely those for dated volcanic rocks in eastern Australia supplemented by poles for Australian Cenozoic weathering horizons, and inferred poles from Pacific Ocean and Indian Ocean hotspot analyses and North American Cenozoic poles rotated to Australian coordinates, yielded a mean age of ca 24 ± 3 Ma, i.e. late Oligocene to early Miocene, interpreted as the time of formation of hematite in the sampled ferruginous zone. The ferruginous weathering occurred under globally warm conditions and was followed during the early to middle Miocene climatic optimum by the deposition of channel iron deposits, which incorporated detrital hematitic material derived from erosion of the ferruginous weathering zone beneath the Hamersley Surface. 相似文献
15.
The interface where bedrock transforms to regolith is not planar but rather has a roughness that varies with the scale of observation. The complexity of this surface is manifested in both element-depth and fragment size-depth distributions and may sometimes be related to the longitudinal profiles of watershed streams. The fractal nature of the bedrock-regolith interface means that the interface has a “thickness” which is >20 m in two ridgetop examples from Pennsylvania and Puerto Rico. Such weathering thicknesses, modeled as a function of one-dimensional fluid flow, are affected by the balance between rates of weathering and erosion. One-dimensional models are consistent with weathering advance rates that vary with equilibrium solubility and porefluid velocities (and not reaction kinetics). However, fluid flow is not strictly downward and one-dimensional. Permeability of regolith changes as particle size and bulk density changes with depth. Thus, both downward and lateral flow occurs especially at reaction fronts where reactions change permeability. The rate of weathering advance is, therefore, affected by the 3-dimensional distribution of reaction zones that affect permeability across the watershed. Quantitative models of such phenomena over a range of spatial and temporal scales are needed. 相似文献
16.
Raymond E. Smith 《Journal of Geochemical Exploration》1987,28(1-3)
In some glaciated regions, weathered mantles, formed under previous climatic regimes, were not always eroded bare by glacial activity, but instead lie buried beneath the glacial overburden. It is obviously important that geochemical exploration programs in such terrain should take into account some of the known regolith features seen in deeply weathered regions. The effects of glacial action upon deeply weathered terrain are considered in three conceptual models. The critical factor in each is the depth of truncation of the preglacial weathering profile. All three proposed models are dynamic systems and a wide range of intermediate situations must be expected.In Model 1 a complete, largely undisturbed, weathering profile is preserved beneath till. The key characteristic is preservation of a lateritic duricrust which may contain areally large (up to 200 km2) geochemical anomalies. It would be critical, firstly, that the duricrust be sufficiently continuous to allow a reasonable success rate in its being sampled, and secondly that the duricrust be recognizable in drill spoil. The most efficient geochemical exploration could be based upon wide-spaced overburden drilling directed at sampling the duricrust. For reconnaissance, holes could be based upon a 1-km grid where stratabound massive polymetallic sulphide or stratabound gold deposits are sought. Even wider spacing could be tried where larger-sized ore deposits are expected.Model 2 is characterized by a weathered profile that was partly stripped prior to glaciation. The essential feature is a vertically zoned weathering profile in the basement rock in which the upper levels of the weathering profile have undergone leaching of certain elements and lower levels contain enrichments of these elements. Any gossans present would show strong vertical zonation. Relatively strong sources for dispersion in till are likely to be enriched gossans where erosion has cut deep into the profile, zones of supergene enrichment of ore deposits, and supergene ore deposits themselves. In many situations, saprolite under glacial drift would be too soft to provide boulders so important in conventional till prospecting.The essential ingredient in hypothetical Model 3 involves progressive planing away of the weathering profile by glacial action. Thus any halo in duricrust is initially dispersed, followed by dispersion of progressively deeper levels of saprolite. If taken deep enough the supergene enriched zone of a mineral deposit could add to the glacial dispersion. A broadly zoned anomaly would be expected; a till anomaly would be characterized distally by elements from the former duricrust anomaly, with elements more characteristic of supergene zones closer to the source. 相似文献
17.
Within the Daly River basin, Northern Territory, three erosion surfaces are described and their relationships to deep weathering are discussed. The Bradshaw surface is the highest and oldest surface recognized. It is of considerable perfection and forms main divides; it is associated with a deep lateritic profile with a strongly silicified horizon forming the lower part of the pallid zone and extending into rocks immediately beneath. The Maranboy surface now forms secondary divides, with related rock‐cut terraces, below the level of the Bradshaw surface. In most areas it was produced by the stripping of the upper, less silicified parts of the Bradshaw pallid zone. The Maranboy surface is associated with a lateritic weathering profile less deep than the Bradshaw profile and mainly developed in the Bradshaw weathering mantle. A younger erosion surface, the Tipperary surface, advanced by the removal of the Maranboy re‐weathered layer exposing the resistant Bradshaw silicified rock which commonly forms a base‐level of denudation. The Tipperary surface consists of broad plains, gently undulating terrain, and dissected headwater valley floors. It is relatively unweathered and carries depositional mantles which are attributed to climatically induced slope instability. The ages of the erosion surfaces and the possibility of climatic changes in the area are also briefly discussed. 相似文献
18.
19.
《Applied Geochemistry》2002,17(7):885-902
An ancient saprolite has developed on the Palaeoproterozoic granulite, granite gneiss and amphibolite bedrock of the Vuotso–Tankavaara area of central Finnish Lapland. The present day climatic regime in Finnish Lapland lies within the northern boreal zone and so the saprolite there can be regarded as fossil. Cores of saprolite were collected from 4 sections (42 samples) and analyzed chemically and mineralogically. In the study area, progressive weathering of the rocks has been marked by gradual enrichment in Al, Fe and Ti; and depletion of Na, K and Ca. The higher concentration of Fe(III) and water and reduced Na and Ca in weathered bedrock in the 4 sections are indicative of oxidation, hydration and leaching processes involved during weathering. The primary minerals in the saprolite are plagioclase feldspar, K-feldspar, quartz, garnet (almandine) and hornblende; the common secondary minerals are kaolinite, halloysite, and vermiculite in addition to minor amounts of sericite. Intense weathering is indicated by: (1) the presence of kaolinite and halloysite in 4 sections of different bedrock types, and (2) the comparatively lower SiO2/Al2O3 (wt.%) ratio (2.30) of weathered granulites (3 sections) as compared to fresh granulite (4.33) and that of weathered amphibolite (2.68) as compared to fresh amphibolite (3.56). In general, kaolinite and halloysite have formed through the weathering of feldspars, garnet, and biotite. Vermiculite is the most probable alteration product of biotite. The formation of kaolinite and halloysite in Finnish Lapland indicates wetter and warmer climatic conditions during the time of their formation than at present. The possible time for formation of the saprolite is early Cretaceous–early Tertiary into Middle Miocene. 相似文献
20.
Thomas A. Douglas 《Chemical Geology》2006,231(3):236-251
The draw down of CO2 from the atmosphere during mineral weathering plays a major role in the global budget of this greenhouse gas. Silicate minerals remove twice the CO2 of carbonate minerals per mole of calcium in runoff during weathering. Bedrock weathering chemistry was investigated in the White River watershed of northeastern USA to investigate whether there are seasonal differences in carbonate and silicate weathering chemistry. Geographic Information Systems analyses of bedrock geology were combined with major element concentrations in river waters to gain an understanding of the consistency of mineral weathering during three seasons. The percent of carbonate mineralogy comprising the bedrock in tributaries of the White River varied from less than 5% to 45% by area. A mass balance calculation using major element concentrations in waters was applied to estimate the seasonal relationships between bedrock geology and bicarbonate flux. In all tributaries and the main stem of the White River the highest calculated percent of bicarbonate from carbonate mineral weathering was measured in the late fall. The results suggest that carbonate and silicate bedrock weathering processes are seasonally controlled. Thus single season sampling could not accurately represent an entire year's geochemical budget. In the White River, water samples obtained solely during the summer would consistently underestimate the total yearly source of bicarbonate from carbonate bedrock weathering. The same sample set would also provide data that would lead to an underestimation of the yearly atmospheric CO2 draw down by bedrock weathering in the watershed. For example at four of the seven locations studied there was an almost two-fold difference between summer and spring calculated atmospheric CO2 consumption rates. 相似文献