从地壳上地幔构造看大陆岩石圈伸展与裂解

本篇讨论大陆岩石圈拆沉、伸展与裂解作用过程。由于大陆岩石圈厚度大而且很不均匀,产生裂谷的机制比较复杂。大陆碰撞远程效应的触发,岩石圈拆沉,以及板块运动的不规则性和地球应力场方向转折,都可能产生岩石圈断裂和大陆裂谷。岩石圈拆沉为在重力作用下"去陆根"的作用过程,演化过程可分为大陆根拆离、地壳伸展和岩石圈地幔整体破裂三个阶段。大陆碰撞带、俯冲的大陆和大洋板块、克拉通区域岩石圈,都可能产生岩石圈拆沉。大陆岩石圈调查表明,拉张区可见地壳伸展、岩石圈拆离、软流圈上拱和热沉降;它们是大陆岩石圈伸展与裂解早期的主要表现。从初始拉张的盆岭省到成熟的张裂省,拆离后地壳伸展成复式地堑,下地壳幔源玄武岩浆侵位,断裂带贯通并切穿整个岩石圈,表明地壳伸展进入成熟阶段。中国东北松辽盆地和西欧北海盆地曾处于成熟的张裂省。岩石圈破裂为岩浆侵位提供了阻力很小的通道网。岩浆侵位作用伴随岩石圈破裂和热流体上涌,成熟的张裂省可发展成大陆裂谷。多数的大陆裂谷带并没有发展成威尔逊裂谷带和洋中脊,普通的大陆裂谷要演化为威尔逊裂谷带,必须有来自软流圈的长期和持续的热流和玄武质岩浆的供应。威尔逊裂谷带岩石圈地幔和软流圈为地震低速带,其根源可能与来自地幔底部的地幔热羽流有关。     

晶粥储存、侵入体累积组装与花岗岩成因

花岗质岩浆在地壳内的储存、迁移和分异,是导致大陆地壳生长演化的基本过程.有关地壳岩浆冷储存的新发现,挑战了数十年来深部存在以熔融体为主要组成的大岩浆房的观点.对活火山区的地球物理探测、岩石矿物学研究以及热历史模拟都一致证明,岩浆储库中的物质以晶粥为主,它们长时间处于固相线下的温度条件,属于冷储存状态.今天出露地表的大型侵入岩体,是古岩浆储库的代表,它们大都是在数百万年甚至更长的时间跨度内,多幕式的岩浆输运、累积侵位和多次添加组装而成的.侵入体的累积组装,可以通过岩石单元间接触关系的观察、岩石和矿物成分的不均一性研究以及侵入体内大的结晶时间跨度来证明.地壳浅部大型侵入体的形成,大体积的火山喷发,都要求存在穿地壳的岩浆通道系统,该系统中岩浆主要以岩墙形式将不同深度的岩浆储库串联起来,并通过无数岩床的堆垛而形成巨大的岩株或岩基等侵入体.高分异花岗岩和高硅流纹岩的存在,尤其是火山的超级喷发现象,要求岩浆储库的晶粥体发生活化和分异,而晶粥的解体往往是由于从下部侵入的新岩浆注入了额外的热和流体.保留在岩石中的晶体种群蕴含了侵入体累积组装、晶粥活化和岩浆分异的线索.尤其是再循环晶可以提供岩浆通道系统结构和演变的新信息.未来,在花岗岩成因研究中,重点要从晶粥活化与岩浆分异演化过程、岩浆上升和组装机制、火山岩与侵入岩的成因联系等方面入手,开展岩浆通道系统的跨学科研究,构建花岗岩岩浆过程研究的新范式,深入认识大陆地壳的生长和演化机理.      

U-Pb geochronology of Paraná volcanics combined with trace element geochemistry of the zircon crystals and zircon Hf isotope data

The Paraná volcanic province is a window into mantle and crustal processes in the Cretaceous. The variability and complexity of this province can be determined through the study of minerals. An integrated study of zircon from Paraná lavas (one high-Ti basalt, one low-Ti andesite, one high-Ti rhyodacite and one high-Ti andesite sill) was achieved using backscattered electron imaging, sensitive high resolution ion microprobe (SHRIMP-IIe) for U-Pb geochronology, and laser ablation inductively coupled mass spectrometer (LA-ICPMS) to determine the Lu-Hf isotopes and the trace-element compositions. U-Pb-Hf and trace-element data indicate that zircon crystallized from the magma at approximately 134 Ma. This South American large igneous province originated from the mantle and was contaminated by crust either in the mantle or during ascent and crystallization of magma. Contaminant continental crust had Precambrian age. Trace elements point to a new compositional field for zircon, different from other types of provinces. Examination of volcanic zircon improves our understanding of age and contamination of the Paraná volcanics.     

A granite–gabbro complex from Madagascar: constraints on melting of the lower crust

The Ranomandry Complex is a Neoproterozoic, nested intrusion from central Madagascar composed of a gabbroic core within a coeval peraluminous granite ring intruding pelitic metasediments. Although xenocryst entrainment and magma mixing have both contributed to marginal phases of the granite, the primary melt is characterised by steep LREE/HREE ratios and negligible, or slightly positive, Eu anomalies. Both isotopic and trace element systematics preclude an origin from either partial melting of the metapelitic country rock or from fractional crystallisation of the gabbroic magma. However, trace-element modelling suggests an origin from the dehydration melting of a plagioclase-poor, garnet-bearing metagreywacke at temperatures of 850–900 °C and at lower crustal pressures (>10 kbar). Melting of an enriched subcontinental mantle generated gabbroic magmas that caused advective heating and anatexis at the base of thickened continental crust during their ascent. Transport of the resulting granite magma was facilitated by the pre-existing plumbing system that overcame thermal and mechanical problems associated with both diapirism and self-propagating dykes as mechanisms for long-distance transport of granite magmas. The nested geometry of the intrusions is an indication of a structurally homogeneous lower crust that contains no pre-existing shear zones or fault systems.     

From initiation to termination: a petrostratigraphic tour of the Ethiopian Low-Ti Flood Basalt Province

Continental flood basalts (CFBs), thought to preserve the magmatic record of an impinging mantle plume head, offer spatial and temporal insights into melt generation processes in large igneous provinces (LIPs). Despite the utility of CFBs in probing mantle plume composition, these basalts typically erupt fractionated compositions, suggestive of significant residence time in the continental lithosphere. The location and duration of residence within the lithosphere provide additional insights into the flux of plume-related magmas. The NW Ethiopian plateau offers a well-preserved stratigraphic sequence from flood basalt initiation to termination, and is thus an important target for study of CFBs. This study examines modal observations within a stratigraphic framework and places these observations within the context of the magmatic evolution of the Ethiopian CFB province. Data demonstrate multiple pulses of magma recharge punctuated by brief shut-down events, with initial flows fed by magmas that experienced deeper fractionation (lower crust). Broad changes in modal mineralogy and flow cyclicity are consistent with fluctuating changes in magmatic flux through a complex plumbing system, indicating pulsed magma flux and an overall shallowing of the magmatic plumbing system over time. The composition of plagioclase megacrysts suggests a constant replenishing of new primitive magma recharging the shallow plumbing system during the main phase of volcanism, reaching an apex prior to flood basalt termination. The petrostratigraphic data sets presented in this paper provide new insight into the evolution of a magma plumbing system in a CFB province.     

Magma plumbing beneath Anak Krakatau volcano, Indonesia: evidence for multiple magma storage regions

Understanding magma plumbing is essential for predicting the behaviour of explosive volcanoes. We investigate magma plumbing at the highly active Anak Krakatau volcano (Indonesia), situated on the rim of the 1883 Krakatau caldera by employing a suite of thermobarometric models. These include clinopyroxene-melt thermobarometry, plagioclase-melt thermobarometry, clinopyroxene composition barometry and olivine-melt thermometry. Petrological studies have previously identified shallow magma storage in the region of 2–8 km beneath Krakatau, while existing seismic evidence points towards mid- to deep-crustal storage zone(s), at 9 and 22 km, respectively. Our results show that clinopyroxene in Anak Krakatau lavas crystallized at a depth of 7–12 km, while plagioclase records both shallow crustal (3–7 km) and sub-Moho (23–28 km) levels of crystallization. These magma storage regions coincide with well-constrained major lithological boundaries in the crust, implying that magma ascent and storage at Anak Krakatau is strongly controlled by crustal properties. A tandem seismic tomography survey independently identified a separate upper crustal (<7 km) and a lower to mid-crustal magma storage region (>7 km). Both petrological and seismic methods are sensitive in detecting magma bodies in the crust, but suffer from various limitations. Combined geophysical and petrological surveys, in turn, offer increased potential for a comprehensive characterization of magma plumbing at active volcanic complexes.     

Magmatic history of the Eastern Creek Volcanics,Mt Isa,Australia: insights from trace-element and platinum-group-element geochemistry

The Paleoproterozoic basalts of the Eastern Creek Volcanics are a series of continental flood basalts that form a significant part of the Western Fold Belt of the Mt Isa Inlier, Queensland. New trace-element geochemical data, including the platinum-group elements (PGE), have allowed the delineation of the magmatic history of these volcanic rocks. The two members of the Eastern Creek Volcanics, the Cromwell and Pickwick Metabasalt Members, are formed from the same parental magma. The initial magma was contaminated by continental crust and erupted to form the lower Cromwell Metabasalt Member. The staging chamber was continuously replenished by parental material resulting in the gradual return of the magma composition to more primitive trends in the upper Cromwell Metabasalt Member, and finally the Pickwick Metabasalt Member formed from magma dominated by the parental melt. The Pickwick Metabasalt Member of the Eastern Creek Volcanics has elevated PGE concentrations (including up to 18 ppb Pd and 12 ppb Pt) with palladium behaving incompatibly during magmatic fractionation. This trend is the result of fractionation under sulfide-undersaturated conditions. Conversely, in the basal Cromwell Metabasalt Member the PGE display compatible behaviour during magmatic fractionation, which is interpreted to be the result of fractionation of a sulfide-saturated magma. However, Cu remains incompatible during fractionation, building up to high concentrations in the magma, which is found to be the result of the very small volume of magmatic sulfide formation (0.025%). Geochemical trends in the upper Cromwell Metabasalt Member represent mixing between the contaminated Cromwell Metabasalt magmas and the PGE-undepleted parental melt. Trace-element geochemical trends in both members of the Eastern Creek Volcanics can be explained by the partial melting of a subduction-modified mantle source. The generation of PGE- and copper-rich magmas is attributed to melting of a source in the subcontinental lithospheric mantle below the Mt Isa Inlier which had undergone previous melt extraction during an older subduction event. The previous melt extraction resulted in a sulfur-poor, metal-rich metasomatised mantle source which was subsequently remelted in the Eastern Creek Volcanic continental rift event. The proposed model accounts for the extreme copper enrichment in the Eastern Creek Volcanics, from which the copper has been mobilised by hydrothermal fluids to form the Mt Isa copper deposit. There is also the potential for a small volume of PGE-enriched magmatic sulfide in the plumbing system to the volcanic sequence.     

腾冲地块高地热异常区晚白垩世-始新世钾玄质强过铝花岗岩岩石地球化学、年代学特征及构造意义

腾冲地块高地热异常区清水左所营初糜棱岩化黑云母二长花岗岩岩体、新华黑石河热田强糜棱岩化黑云母二长花岗岩岩体、热海热田硫磺塘硅化碎裂正长花岗岩岩体变形变质、岩石地球化学及锆石年代学的研究表明,晚白垩世(73Ma)初糜棱岩化黑云母二长花岗岩岩体为高温钾玄质强过铝花岗岩,形成于活动大陆边缘火山弧-后碰撞转换或过渡构造环境,并经历强烈伸展变形作用,普遍发育早期近水平-低角度(30°)韧性伸展剪切糜棱面理,局部发育晚期高角度右旋走滑挤压韧性糜棱面理;始新世(48~46Ma)强糜棱岩化黑云母二长花岗岩岩体、硅化碎裂正长花岗岩岩体为中-高温钾玄质强过铝花岗岩,并具铝质A型花岗岩特征,形成于后碰撞-板内构造环境,以发育晚期高角度(70°~87°)右旋走滑挤压韧性糜棱面理为特征,其右旋走滑韧性剪切变形时代晚于始新世(48~46Ma)。晚白垩世-始新世钾玄质强过铝花岗岩的形成与俯冲-碰撞造山隆升后的伸展垮塌、拆沉地幔物质上涌玄武质岩浆底侵和地壳部分熔融作用密切相关。始新世-第四纪岩浆活动与高地热异常区(带)空间上密切伴生,新近纪晚期-第四纪构造活动主要表现为脆性走滑-拉张正断层和构造拉分断陷盆地的形成,构造断陷边界断裂与深部岩浆活动是导致腾冲地区高地热异常区(带)中-高温地热温泉沿走滑-拉张断裂带集中分布的主要原因。     

Les dykes basiques du massif ancien de l'Ourika (Atlas de Marrakech,Maroc) : géochimie et significationThe basic dykes of the Ourika old massif (High Atlas of Marrakech): Geochemistry and significance

The Precambrian massif of Ourika is crosscut by two systems of basic dykes, striking N40°E and N90–120°E. Using incompatible trace elements, the two systems form two distinct chemical groups, displaying a continental tholeiitic affinity. The composition variations between the two defined groups can be due to heterogeneities of mantle sources and to contamination, during the magma ascent, by the continental crust. The emplacement of these basic dykes, before the late-PIII formations, can be related to the Neoproterozoic distension generalised to the Anti-Atlas chain. To cite this article: A. Barakat et al., C. R. Geoscience 334 (2002) 827–833.     

On the role of diapirism in the, segregation, ascent and final emplacement of granitoid magmas

Only bodies of magma with a high crystal content and partially molten (crustal) country rocks can ascend as diapirs; once such an envelope is pierced, the diapiric ascent of the pluton is arrested by the high viscosity of a solid aureole. Deformation by shortening of the carapace of these bodies may lead to the expulsion of a magma with a relatively low crystal content, which may then continue ascent via fractures and dykes.

The details of the mechanisms of granitoid magma segregation are still unknown, but it appears that many magmas hegin their ascent through the crust as mushes with at least 50% melt, and that such magmas are rheologically able to ascend through a thickness of crust. This ascent mechanism explains the dearth of structures attributable to the ascent of granitoids, in contrast to the abundance of structures that developed during their final emplacement.

When a magma becomes too crystalline (melt < 25%) to continue its ascent via dykes, it is immobilised. At approximately this stage, a hydrous magma may become saturated with water and release fluids into the aureole, making it particularly susceptible to deformation. Magma that continues to arrive at this level is also immobilised, and the pluton grows as a ballooning diapir. These characteristically deform themselves and their aureoles by bulk shortening.

Magmas that are able to ascend to shallow depths, largely by virtue of lower water contents and higher initial temperatures, tend to become finally accommodated by such brittle processes as stoping and cauldron subsidence. High level intrusions lend to be tabular, are also fed by dykes or conduits, and assemble in tabular batholiths.     

Multi-stage evolution of the Xuhuai rift: Insights from the occurrence and compositional profiles of doleritic sills in the southeastern margin of the North China Craton

Various types of igneous suites occurred between 930 Ma and 890 Ma in the North China craton are known to represent a large igneous province (LIP). However, the magma plumbing system of this LIP and its potential consequence to a breakup event are poorly understood. We report morphology, crystal size distribution of plagioclase, and whole-rock and mineral geochemistry profiles of this LIP represented by the two decoupled mafic sill complexes (Niutishan and Pingshan) in the Xuhuai basin. In terms of petrography and whole-rock geochemistry, unlike the lower-level doleritic Niutishan sill, the Pingshan sill is subdivided into an upper and a lower sequence that meets at a Sandwich Horizon but lacks stratification. The significant En reversals present an almost M-shaped profile that differs from a C-shaped profile as previously revealed in the Niutishan sill. Quantitative textural analyses show relatively strong plagioclase orientation in the lower sequence of the Pingshan sill, which is attributed to magma flow. The Pingshan sill is interpreted to have been constructed as multiple magma injections from crustal magma chambers based on the crystal size distribution and the varied crystallization pressure (5.1–7.5 kbar) of clinopyroxene crystals.Similar to the far-field radiating Dashigou dyke swarm (c. 925 Ma), the Niutishan sill is enriched in incompatible elements, which may represent the initiation of the Xuhuai rifting. However, the depleted features of the diamond-bearing Pingshan sill and the other coeval doleritic sills (916–890 Ma) were probably related to the subsequent process switched from continental rifting to lithospheric rupture in the divergent stage of the Wilson cycle. The occurrence of the intrusive rocks evolving from an early radiating dyke swarm to later sill complexes indicates a time-transgressive change from radial to planar patterns, implying that it was the upwelling asthenospheric plume material, instead of plate boundary processes, governed the initial and early evolution of this intracontinental rift.     

Modeling the multi-level plumbing system of the Changbaishan caldera from geochemical,mineralogical, Sr-Nd isotopic and integrated geophysical data

Changbaishan, an intraplate volcano, is characterized by an approximately 6 km wide summit caldera and last erupted in 1903. Changbaishan experienced a period of unrest between 2002 and 2006. The activity developed in three main stages, including shield volcano(basalts), cone-construction(trachyandesites to trachytes with minor basalts), and caldera-forming stages(trachytes to comendites). This last stage is associated with one of the more energetic eruptions of the last millennium on Earth, the 946 CE, VEI 7 Millennium Eruption(ME),which emitted over 100 km3 of pyroclastics. Compared to other active calderas, the plumbing system of Changbaishan and its evolution mechanisms remain poorly constrained. Here, we merge new whole-rock,glass, mineral, isotopic, and geobarometry data with geophysical data and present a model of the plumbing system. The results show that the volcano is characterized by at least three main magma reservoirs at different depths: a basaltic reservoir at the Moho/lower crust depth, an intermediate reservoir at 10–15 km depth, and a shallower reservoir at 0.5–3 km depth. The shallower reservoir was involved in the ME eruption, which was triggered by a fresh trachytic melt entering a shallower reservoir where a comenditic magma was stored. The trachytes and comendites originate from fractional crystallization processes and minor assimilation of upper crust material, while the less evolved melts assimilate lower crust material. Syn-eruptive magma mingling occurred during the ME eruption phase. The magma reservoirs of the caldera-forming stage partly reactivate those of the cone-construction stage. The depth of the magma storage zones is controlled by the layering of the crust.The plumbing system of Changbaishan is vertically extensive, with crystal mush reservoirs renewed by the replenishment of new trachytic to trachyandesitic magma from depth. Unlike other volcanoes, evidence of a basaltic recharge is lacking. The interpretation of the signals preceding possible future eruptions should consider the multi-level nature of the Changbaishan plumbing system. A new arrival of magma may destabilize a part of or the entire system, thus triggering eruptions of different sizes and styles. The reference model proposed here for Changbaishan represents a prerequisite to properly understand periods of unrest to potentially anticipate future volcanic eruptions and to identify the mechanisms controlling the evolution of the crust below volcanoes.     

华北东部晚中生代区域伸展背景下同构造花岗岩体的起源与就位

花岗质岩浆的起源、迁移及就位是研究大陆岩石圈流变学特性的重要方面。然而,板内伸展背景下同构造花岗岩体的岩浆来源、就位机制和岩浆流动与区域应力场的关系等问题缺乏系统性的总结。晚中生代期间华北板块东部逐渐变为区域伸展体制,同时中浅部地壳形成一系列的韧性剪切带、变质核杂岩和拆离断层,这些伸展构造往往伴有同剪切变形的花岗岩体。因此,华北东部是系统研究板内伸展背景下同构造花岗岩体的最佳区域。本文选取多个典型的同构造花岗岩体,进行综合分析。通过归纳总结这些同构造岩体的岩石地球化学和年代学资料,发现多数同构造岩体具有多个岩浆源区,且较早就位的中性岩席(单元)往往来自壳幔混合岩浆或新生下地壳的部分熔融,而较晚的酸性岩席(单元)则主要来源于古老下地壳的部分熔融。这一特点反映了同伸展岩体岩浆源区由深至浅的演化规律,也揭示了区域伸展背景下源自地幔的流体和热量是触发地壳部分熔融的重要因素。通过分析岩浆就位过程中围岩和岩体中形成的定向及变形组构,发现华北东部同伸展岩体的就位模式可分为三大类:以扁平岩床或岩基形式就位于中部地壳的水平韧性剪切带内;岩浆以近直立运移的方式形成长轴平行拆离断层的岩基,就位于变质核杂岩核部或拆离断层下盘;岩浆就位于再活化的先存断裂,通过膨胀作用、挤压围岩获得就位空间并使围岩变形,形成类似底辟作用的就位方式。剪切应力和浮力是影响岩浆运移方向的重要力学参数。岩浆自源区上升的过程中浮力起着主要控制作用,就位于韧性剪切带时剪切应力起着控制作用,就位于浅部地壳的脆-韧性过渡带时浮力的作用再次凸显。     

Petrology and geochemistry of the 2014–2015 Holuhraun eruption,central Iceland: compositional and mineralogical characteristics,temporal variability and magma storage

The 2014–2015 Holuhraun fissure eruption provided a rare opportunity to study in detail the magmatic processes and magma plumbing system dynamics during a 6-month-long, moderate- to large-volume basaltic fissure eruption. In this contribution, we present a comprehensive dataset, including major and trace elements of whole-rock and glassy tephra samples, mineral chemistry, and radiogenic and oxygen isotope analyses from an extensive set of samples (n?=?62) that were collected systematically in several field campaigns throughout the entire eruptive period. We also present the first detailed chemical and isotopic characterization of magmatic sulfides from Iceland. In conjunction with a unique set of geophysical data, our approach provides a detailed temporal and spatial resolution of magmatic processes before and during this eruption. The 2014–2015 Holuhraun magma is compositionally indistinguishable from recent basalts erupted from the Bárðarbunga volcanic system, consistent with seismic observations for magma ascent close to the Bárðarbunga central volcano, followed by dyke propagation to the Holuhraun eruption site. Whole-rock elemental and isotopic compositions are remarkably constant throughout the eruption. Moreover, the inferred depth of the magma reservoir tapped during the eruption is consistently 8?±?5 km, in agreement with geodetic observations and melt inclusion entrapment pressures, but inconsistent with vertically extensive multi-tiered magma storage prior to eruption. The near constancy in the chemical and isotopic composition of the lava is consistent with the efficient homogenization of mantle-derived compositional variability. In contrast, occurrence of different mineral populations, including sulfide globules, which display significant compositional variability, requires a more complex earlier magmatic history. This may include sampling of heterogeneous mantle melts that mixed, crystallized and finally homogenized at mid- to lower-crustal conditions.     

Petrology of the mafic sill of Narshingpur-Lakhnadon section,Eastern Deccan volcanic province

Deccan volcanism with a tremendous burst of volcanic activity marks a unique episode in Indian geological history and covers nearly two third of Peninsular India. Occurrences of mafic sill in the continental basalts are rather rare throughout the flood basalt provinces and only few sporadic reports have been described from different Continental Flood Basalts of the world. In the present article, petrology of mafic sill from the Narshingpur-Lakhnadon section of Eastern Deccan province of India has been presented. The mafic sill in the field is found to occur in a relatively deep valley amidst Gondwana rocks, which occur as the basement of the extrusion. The sill is spatially associated with three initial flows viz. flow I, II and III of adjacent Narshingpur-Harrai-Amarwara section. The sill in its central part is a medium grained rock and petrographically corresponds to dolerite containing augite, plagioclase and rare olivine grains; the chilled facies of the sill is characterized by phenocrysts of olivine, plagioclase and augite that are set in groundmass consisting predominantly of plagioclase, olivine and glass. Mineral chemistry indicates that olivine phenocrystal phase is magnesian (Fo61). Plagioclase phenocrystal composition ranges from An 51 to An 71 whereas the same variation of the groundmass plagioclase composition corresponds to An 31 to An 62. The overlap in the compositions for groundmass and phenocrystal plagioclase may be explained due to fluctuating PH2O condition. The pyroxene compositions (both groundmass and phenocryst) in majority of the cases are clubbed well within the augite field, however, in a few cases, groundmass compositions are found to fall in the sub-calcic augite and pigeonite field. Some zoned pyroxene phenocrysts, characteristically display different types of zoning patterns. Opaque minerals in the mafic sill are found to be magnetite and ilmenite and this coexisting iron-oxide composition helps to constrain the prevalent fO2 condition in the parent magma. The geochemistry of the mafic sill and associated basaltic lava flows indicates close genetic link amongst them. Critical consideration of trace elements indicates a distinct enriched mantle source (EM-I/EM-II/HIMU) for the parental magma. Trace element modeling indicates that equilibrium batch-melting of plume source followed by fractionation of olivine, clinopyroxene and plagioclase and subsequent heterogeneous mixing of melt and settled crystals can very well explain the genesis of the mafic sill and the associated basaltic flows.     

Mafic rocks spatially associated with Devonian felsic intrusions of the southern Lachlan Fold Belt: A possible mantle contribution to crustal evolution processes

Devonian basaltic to andesitic dykes and compositionally similar plutons of the southern Lachlan Fold Belt are often temporally and spatially closely associated with large granitic complexes. Mafic intrusions play a major role in the transfer of heat into the continental crust, providing a thermal ‘engine’ which leads to crustal melting, and geochemical/isotopic evidence indicates that they contribute chemical constituents to the products of this melting. Studied mafic‐intermediate dykes in the southern Lachlan Fold Belt have tholeiitic to alkaline affinities and include groups with both high and low Ti and K. Several dyke generations may be associated with a single felsic complex. Primitive mantle‐normalised trace‐element abundance patterns with negative Nb and Ti anomalies for basaltic/andesitic and gabbroic/dioritic rocks as young as Early Devonian most resemble those of modern island arcs and suggest an influence of subduction on mantle magma sources. However, some Middle and Late Devonian mafic rocks are enriched in light rare‐earth elements and other incompatible elements, lack significant Nb anomalies, and confirm the change to continental‐rift extensional settings clearly indicated by Lachlan Fold Belt geology.     

The structure of the Monte Amiata volcano-geothermal area (Northern Apennines, Italy): Neogene-Quaternary compression versus extension

The tectonic evolution of the Mt Amiata volcano-geothermal area is under discussion. Some authors state that this region, as well as the hinterland of the Northern Apennines, were affected by compression from the Cretaceous to the Quaternary. In contrast, most authors believe that extension drove the tectonic evolution of the Northern Apennines from the Early Miocene to the Quaternary. Field data, seismic analyses and borehole logs have been integrated in order to better define the structural features of the continental crust in the Mt Amiata geothermal area. In this paper I propose the hypothesis that the structure of the crust in the Mt Amiata volcano-geothermal area derives from two main geological processes: (1) contractional tectonics related to the stacking of the Northern Apennines (Cretaceous–Early Miocene), (2) subsequent extensional collapse of the hinterland of the mountain chain, and related opening of the Northern Tyrrhenian Sea (Early Miocene–Quaternary). Compressional and extensional structures characterise the Mt Amiata region, although extensional structures dominate its geological framework. In particular the extension produced: (a) Middle-Late Miocene boudinage of the previously stacked tectonic units; (b) Pliocene–Quaternary normal faulting which favoured the emplacement of a magmatic body in the middle-upper crust; and (c) the eruption of the Mt Amiata volcano, which gave rise to an acid and intermediate volcanic complex (0.3–0.19 Ma). The extension produced the space necessary to accommodate the Middle-Late Miocene marine and continental sediments. Pliocene and Quaternary normal and transtensional faults dissected the previous structures and influenced the Early Middle Pliocene marine sedimentation within the structural depressions neighbouring the Mt Amiata volcano. The magmatic body was emplaced at depth (about 6–7 km) during the Pliocene extension, and produced the eruption of the Mt Amiata volcano during the Late Pleistocene. This gave rise to local uplift, presently reaching about 3,000 m, as well as a negative Bouguer anomaly (−16 mgal), both centred on the Mt Amiata area. The crustal dome shows a good correspondence with the convex shape of the regional seismic marker known as the K-horizon, which corresponds to the 450°C isotherm, and the areas with greatest heat flow. This is probably a consequence of the above-cited magmatic body presently in the process of solidification. A Late Pleistocene eruption occurred along a crustal fissure striking N50° (Mt Amiata Fault), which crosscuts the crustal dome. Hydrothermal circulation, proven by the occurrence of thermal springs and gas vents (mainly CO₂ and H₂S), mainly occurs along the Mt Amiata Fault both in the northeastern ans southwestern sides of the volcano.     

Giant plagioclase growth during storage of basaltic magma in Emeishan Large Igneous Province,SW China

Giant plagioclase basalts (GPBs) reflect the storage of flood basalt magma in subvolcanic magma chambers at crustal depths. In this study of the Late Permian Emeishan large igneous province in southwest China, we focus on understanding the plumbing system and ascent of large-volume basaltic magma. We report a quantitative textural analysis and bulk-rock geochemical composition of clustered touching crystals (CT-type) and single isolated crystal (SI-type) GPB samples from 5- to 240-m-thick flows in the Daqiao section. Both types of GPBs are evolved (<6 MgO wt%), but have high Ti/Y ratios (>500) and high total FeO content (11.5–15.2 wt%). The mineral chemistry of the two types of plagioclase displays a small range of anorthite content (<5 mol%), which is consistent with their unzoned characteristics. The two types of GPBs have S-type crystal size distributions but have quite different slopes, intercepts, and characteristic lengths. The characteristic lengths of the five flows are 1.54, 2.99, 1.70, 3.22, and 1.86 mm, respectively. For plagioclase growth rates of 10^?11 to 10^?10 mm/s, steady-state magma chamber models with simple continuous crystal growth suggest that CT-type plagioclase megacrysts have the residence time of about 500–6,000 years, whereas the residence time for SI-type plagioclase is significantly longer, about 1,000–10,000 years. By combining field geology, quantitative textural data with geochemistry, we suggest that CT- and SI-type crystals grew and were coarsened in the outer part and inner part of a magma chamber, respectively. Magma evolution during storage is controlled by crystallization, crystal growth, and magma mixing, and pulsating eruptions occur in response to the continuous supply of hot magma.     

The difference between oceanic and continental tholeiites: a fluid dynamic explanation

Continental tholeiites have higher SiO₂, K₂O and light rare earth element contents and more evolved isotopic characteristics than their oceanic counterparts. These differences can be explained if the compositions of the parent magmas to both types of tholeiites are similar but if continental magmas assimilate significant amounts of continental crust en route to the surface. Although there is little doubt that most continental tholeiites have assimilated crustal material, the lcoation and mechanism of assimilation remain uncertain. Longhi (1981) has argued that magmas derived directly from the mantle should crystallize little orthopyroxene. The abundance of orthopyroxene in most continental layered intrusions suggests that they have crystallized from magmas which have assimilated continental crust. Since orthopyroxene is an early crystallizing phase in layered intrusions, this assimilation must occur early, before the magma enters the chamber. Assimilation can occur at the margins of the dykes which feed magma chambers, depending on the nature of the flow. If the flow is turbulent the high temperatures at the centre of the dyke will extend to the margins and the magma will erode the dyke walls. If the flow is laminar, a conductive profile develops at the margin and the flowing magma chills against the walls, protecting them from thermal erosion. The nature of flow in a dyke can be predicted from the Reynolds number, the criteria for turbulence. Reynolds number calculations suggest that the flow of primitive magmas in continental dykes will be fully turbulent and, if this is the case, assimilation of low melting point components in the walls of the dyke is inevitable. It is therefore suggested that many of the geochemical characteristics of continental tholeiites result from melting at the walls of dykes as primitive magmas ascend through the crust.     

The precambrian magmatic rocks of timna valley,southern israel

In the Timna Valley in southern Israel a small ‘layered’ serpentinized-chloritized gabbroic rock occupies the core of Har Timna and an alkali-potassium syenite to granite composes most of the area. Intermediary rock types between the basic and acid rocks are common. This magmatic sequence is in agreement with the latest model suggested for the last phase of Precambrian activity in the Arabo-Nubian massif.Mantle-derived basaltic magma intruded the crust from a shallow, layered magmatic chamber. This magma was the heat source that caused a partial melting of the crust and the formation of A-type, alkali, potassium rich, granitic magma. This acid magma was the source of the alkali rhyolitic dykes and the Biqat Hayareah volcanic rock types. This whole process took place in a cyclic manner under a tensional tectonic regime. Creation or reactivation of deepseated faults caused a new pulse of intrusion of basic magma and a remelting of the crust.Serpentinization was the last phase - hydrothermal activity at temperatures of less than 400°C. This hydrothermal activity could have been caused by radioactive heating of the alkali granite after its final stage of crystallization or by recent Dead Sea Rift hydrothermal waters.