The Warrabin Trough,western Adavale Basin,Queensland

The Warrabin Trough in SW Queensland contains up to 3000 m of Devonian sedimentary rocks, and is a structural remnant of the formerly widespread Adavale Basin. Seismic data recently obtained by the Bureau of Mineral Resources enable reinterpretation of existing poorer quality seismic data, so that the structural framework and most of the trough margin can be mapped.

Sedimentary rocks in the trough are folded and are displaced by high‐angle reverse faults, which were probably active during the Late Carboniferous. LANDSAT studies provide additional information on the position of faults, which on seismic records appear to be mainly contained within the trough sequence. Differential compaction, together with slight post‐Cretaceous rejuvenation of some structures, may have given surface expression to some of these deep faults.

The western margin of the trough has been drilled, but only 775 m of the Devonian sequence was penetrated. The petroleum source‐rock and maturation levels do not appear encouraging on the basis of this drilling. However, the thick sequence of arenites, lutites and carbonates, interpreted to occur in the trough, offer considerable potential for hydrocarbon source‐rocks and reservoirs.     

Tectono‐sedimentary evolution of the northernmost margin of the NE German Basin between uppermost Carboniferous and Late Permian (Rotliegend)

The tectono‐sedimentary evolution of the Rotliegend deposits of the northernmost margin of NE German Basin (NEGB) has been analysed on the basis of detailed sedimentary logs of 300 m of core material together with the re‐evaluation of 600 km of seismic lines. Three distinct phases were recognized. During the initial Phase I, basin geometry was largely controlled by normal faulting related to deep‐seated ductile shearing leading to a strong asymmetric shape, with a steep fault‐controlled eastern margin and a gently, dipping western margin. The results of forward modelling along a cross‐section fit the basin geometry in width and depth and reveal a footwall uplift of c. 1000 m. Adjacent to the steep faults, local sedimentation of Lithofacies Type I was confined to non‐cohesive debris flow‐dominated alluvial fans, whereas the gently dipping western margin was dominated by alluvial‐cone sedimentation. During the post‐extensional period (Phase II), cooling of the lithosphere generated additional accommodation space. The sediments of Lithofacies Type II, comprising mainly clast‐supported conglomerates, are interpreted as braided ephemeral stream flow‐surge deposits. Tectonic quiescence and an increase in flood events resulting from wetter climate led to progradation of this facies over the entire region. At the end of this period, the accommodation space was almost completely filled resulting in a level topography. Phase III was controlled by the thermal‐induced subsidence of the southerly located NEGB in post‐Illawarra times. The formerly isolated region tilted towards the SW, thus forming the northern margin of the NEGB during uppermost Havel and Elbe Subgroup times. The sediments of Lithofacies Type III were divided into a marginal sandstone‐dominated environment and a finer‐grained facies towards the SW. The former consists of poorly‐sorted coarse‐grained sandstones of a proximal and medial ephemeral stream floodplain facies. The latter comprise mud flat fines and fine‐grained distal ephemeral stream deposits. The end of the tectono‐sedimentary evolution is marked by the basinwide Zechstein transgression. Copyright © 2001 John Wiley & Sons, Ltd.     

Structural and metamorphic evolution of the Moornambool Metamorphic Complex,western Lachlan Fold Belt,southeastern Australia

The wedge‐shaped Moornambool Metamorphic Complex is bounded by the Coongee Fault to the east and the Moyston Fault to the west. This complex was juxtaposed between stable Delamerian crust to the west and the eastward migrating deformation that occurred in the western Lachlan Fold Belt during the Ordovician and Silurian. The complex comprises Cambrian turbidites and mafic volcanics and is subdivided into a lower greenschist eastern zone and a higher grade amphibolite facies western zone, with sub‐greenschist rocks occurring on either side of the complex. The boundary between the two zones is defined by steeply dipping L‐S tectonites of the Mt Ararat ductile high‐strain zone. Deformation reflects marked structural thickening that produced garnet‐bearing amphibolites followed by exhumation via ductile shearing and brittle faulting. Pressure‐temperature estimates on garnet‐bearing amphibolites in the western zone suggest metamorphic pressures of ～0.7–0.8 GPa and temperatures of ～540–590°C. Metamorphic grade variations suggest that between 15 and 20 km of vertical offset occurs across the east‐dipping Moyston Fault. Bounding fault structures show evidence for early ductile deformation followed by later brittle deformation/reactivation. Ductile deformation within the complex is initially marked by early bedding‐parallel cleavages. Later deformation produced tight to isoclinal D₂ folds and steeply dipping ductile high‐strain zones. The S₂ foliation is the dominant fabric in the complex and is shallowly west‐dipping to flat‐lying in the western zone and steeply west‐dipping in the eastern zone. Peak metamorphism is pre‐ to syn‐D₂. Later ductile deformation reoriented the S₂ foliation, produced S₃ crenulation cleavages across both zones and localised S₄ fabrics. The transition to brittle deformation is defined by the development of east‐ and west‐dipping reverse faults that produce a neutral vergence and not the predominant east‐vergent transport observed throughout the rest of the western Lachlan Fold Belt. Later north‐dipping thrusts overprint these fault structures. The majority of fault transport along ductile and brittle structures occurred prior to the intrusion of the Early Devonian Ararat Granodiorite. Late west‐ and east‐dipping faults represent the final stages of major brittle deformation: these are post plutonism.     

Coeval versus reciprocal mixed carbonate–siliciclastic deposition, Middle Devonian Baltic Basin, Eastern Europe: implications from the regional tectonic development

The Middle Devonian Narva succession in the Baltic Basin represents a significant turnaround in the history of the basin. The detailed study of core and outcrop sections and the three‐dimensional correlations across the Baltic Basin reveal a carbonate‐dominated, mixed retrogressive succession, overlain by a siliciclastic‐dominated, progradational succession. The palaeogeographic reconstructions show how the shallow, tide‐influenced basin expanded from south‐west to north‐east and, later during the transgression, also to the north, south and east. The transgressive portion of the basin fill is dominated by carbonate‐rich sabkha and supratidal to intertidal deposits on the basin margins, and subtidal carbonates in the basin centre. Siliciclastic material was derived by tidal currents and storm waves from the south‐west through a tidal inlet and flood‐tidal delta complex. This initial transgressive phase is characterized by the lack of subsidence or even episodic uplifts in the northern/north‐western part of the basin margin, shown by convergence of timelines and the thin (30 m) transgressive succession. In contrast, on the southern margin, the facies associations stack vertically into a 70 to 80 m thick succession, indicating significantly higher subsidence rates. The upper part of the transgressive phase indicates subsidence across the whole basin. The upper, progradational portion of the basin fill is dominated by coarse, siliciclastic, tide‐influenced deltaic deposits that rapidly prograded from north‐west to south‐east. This detailed study on the Narva succession shows that siliciclastic and carbonate deposition was coeval and that mixing occurred at different temporal and spatial scales. The mixing was controlled by grain‐size, volume and location of siliciclastic input rather than relative sea‐level changes as suggested in widely used reciprocal mixing models. It is suggested that the forebulge of the Scandinavian Caledonian fold‐and‐thrust belt migrated to the north‐western margin of the Baltic Basin during the earliest Eifelian, as indicated by the lack of subsidence and probable uplift in the northern/north‐western margin during the early transgressive phase. The forebulge migration ceased although the forebulge had already started to subside during the later stages of the transgressive phase. The deltaic progradation is interpreted to be associated with the orogenic collapse and uplift in the Scandinavian Caledonides that caused the erosion of the foreland basin fill and the coarse sediment transport into the Baltic Basin.     

Barry Granodiorite and Sunset Hills Granite: Wyangala‐style intrusion at the margin of a regional ductile shear zone,northern Lachlan Fold Belt,New South Wales

The Barry Granodiorite is a weakly deformed I‐type, and the Sunset Hills Granite is a moderately deformed S‐type, granite. Both granites were passively intruded into an already foliated greywacke and volcanic sequence. Emplacement may have been facilitated by faults related to the oblique opening of the late Early Silurian Hill End Trough. The granites display a dominant foliation which formed during the late Middle Devonian and subsequently was reoriented during the Early Carboniferous. The Barry Granodiorite and Sunset Hills Granite are on the margin of north‐south ductile shear zones related to the Wyangala Batholith. These granites and the adjacent Carcoar Granodiorite have undergone reorientation during movement on ductile shear zones either due to megakinking during late‐stage north‐south shortening, or southeastward movement of the southern margin of the west‐northwest‐trending Lachlan Transverse Zone.     

Pleistocene stratigraphy of the Boco Plain,western Tasmania

The Late Devonian‐Early Carboniferous Mansfield Basin is the northernmost structural sub‐basin of the Mt Howitt Province of east‐central Victoria. It is comprised predominantly of continental clastic sedimentary rocks, and is superimposed upon deformed Cambrian to Early Devonian marine sequences of the Palaeozoic Lachlan Fold Belt. This paper documents evidence for synsedimentary deformation during the early history of the Mansfield Basin, via sedimentological, structural and stratigraphic investigations. Repeating episodes of folding, erosion and sedimentation are demonstrated along the preserved western margins of Mansfield Basin, where fold structures within the lower sequences are truncated by intrabasinal syntectonic unconformities. A convergent successor basin setting (an intermontane setting adjacent to, or between major fault zones) is suggested for initial phases of basin deposition, with synsedimentary reverse faulting being responsible for source uplift and subsequent basin deformation. Palaeocurrents within conglomerate units indicate derivation from the west and are consistent with episodic thrusting along basin margin faults providing elevated source regions. Periods of tectonic quiescence are represented by finer grained meandering fluvial facies (indicative of lower regional topographic gradients) which display drainage patterns that appear not to have been influenced by bounding faults to the west. An up‐sequence increase in the textural and compositional maturity of basin sandstones and conglomerates is proposed to be a result of the incorporation of basin fill into ongoing basin deformation, with unstable metapelitic rocks being progressively winnowed from clast populations. Rather than resulting from Carboniferous (Kanimblan) reactivation of extensional structures, as is generally assumed, the deformation observed within the lower units of the Mansfield Basin is suggested here to be essentially syndepositional and at least Late Devonian in age.     

Metamorphic inheritance of Rheic passive margin evolution and its early‐Variscan overprint in the Teplá‐Barrandian Unit,Bohemian Massif

Rift‐related regional metamorphism of passive margins is usually difficult to observe on the surface, mainly due to its strong metamorphic overprint during the subsequent orogenic processes that cause its exposure. However, recognition of such a pre‐orogenic evolution is achievable by careful characterization of the polyphase tectono‐metamorphic record of the orogenic upper plate. A multidisciplinary approach, involving metamorphic petrology, P–T modelling, structural geology and in situ U‐Pb monazite geochronology using laser‐ablation split‐stream inductively coupled plasma mass spectrometry, was applied to unravel the polyphase tectono‐metamorphic record of metapelites at the western margin of the Teplá‐Barrandian domain in the Bohemian Massif. The study resulted in discovery of three tectono‐metamorphic events. The oldest event M1 is LP–HT regional metamorphism with a geothermal gradient between 30 and 50 °C km^?1, peak temperatures up to 650 °C and of Cambro‐Ordovician age (c. 485 Ma). The M1 event was followed by M2‐D2, which is characterized by a Barrovian sequence of minerals from biotite to kyanite and a geothermal gradient of 20–25 °C km^?1. D2‐M2 is associated with a vertical fabric S2 and was dated as Devonian (c. 375 Ma). Finally, the vertical fabric S2 was overprinted by a D3‐M3 event that formed sillimanite to chlorite bearing gently inclined fabric S3 also of Devonian age. The high geothermal gradient of the M1 event can be explained as the result of an extensional, rift‐related tectonic setting. In addition, restoration of the deep architecture and polarity of the extended domain before the Devonian history – together with the supracrustal sedimentary and magmatic record – lead us to propose a model for formation of an Ordovician passive continental margin. The subsequent Devonian evolution is interpreted as horizontal shortening of the passive margin at the beginning of Variscan convergence, followed by detachment‐accommodated exhumation of lower‐crustal rocks. Both Devonian shortening and detachment occurred in the upper plate of a Devonian subduction zone. The tectonic evolution presented in this article modifies previous models of the tectonic history of the western margin of the Teplá‐Barrandian domain, and also put constraints on the evolution of the southern margin of the Rheic ocean from the passive margin formation to the early phases of Variscan orogeny.     

银川盆地构造发展——深地震反射剖面揭示浅部地质与深部构造的联系

横跨银川盆地北西西向的深地震反射剖面,清晰揭示了银川盆地边界断裂以及整个地壳的结构构造特征,这对研究具活动大陆裂谷性质的银川盆地浅-深构造关系具有重大的意义。贺兰山东麓山前断裂、黄河断裂作为银川盆地的西、东边界断裂,前者为一条缓倾斜、延伸至上、下地壳边界的犁式断裂,而后者则为一条切穿地壳并延伸进入上地幔的深大断裂。根据深地震反射剖面揭示的地壳结构特征,银川盆地浅部结构并非前人认为的"堑中堑"结构,而是表现为由一系列东倾犁式正断层控制的新生代断陷。略微下凹的Moho面几何形态以及厚2~3.2 km的层状强反射带为下地壳最显著的反射特征。Moho面深度与强反射带厚度变化趋势与银川盆地沉积厚度变化趋势几乎一致。本文认为,强反射带的成因可能是由源自地幔的基性岩浆以岩席状的形式底侵进入地壳底部造成的,而这部分形成强反射带的物质可能补偿了因银川盆地断陷而造成的地壳减薄,最终导致银川盆地之下Moho面并未像之前所认为的那样隆起。     

Timing of mineralization and deformation,Peak Au mine,Cobar, New South Wales∗

The ⁴⁰Ar/³⁹Ar dating of alteration muscovite from the Peak Au mine in the Early Devonian Cobar Basin, New South Wales, has distinguished two major episodes of mineralization. Veined (Pb‐Zn‐Cu‐Au) mineralization was broadly synchronous with cleavage formation during the post‐inversion, shortening deformation of the basin sedimentary rocks, and replacive Ag‐Pb‐Zn mineralization significantly postdates the latter event. Veined base metals (Pb‐Zn‐Cu) and Au associated with silicification were coeval with three stages of cleavage formation (D₁, D₂ and D₃) after basin inversion. The Cu‐Au phase of mineralization at the Peak Au mine which was broadly contemporaneous with the culmination of the cleavage‐forming events (D₃) and with the local development of high‐strain zones occurred at 401.5 ± 1.0 Ma (⁴⁰Ar/³⁹Ar on muscovite). This date is essentially coeval with known fossil constraints on the age of basin formation, and indicates that basin inversion and deformation rapidly followed sedimentation. In contrast, replacive Ag‐Pb‐Zn mineralization occurred at 384.0 ± 1.4 Ma (⁴⁰Ar/³⁹Ar on muscovite) during an extended period of relaxation characterized by normal faulting (D₄) which followed the shortening deformation. This mineralization was associated with desilicification and chlorite‐muscovite replacement assemblages which cross‐cut the cleavages, and which may have been broadly contemporaneous with the deposition of part of the Mulga Downs Group which unconformably overlies the Cobar Supergroup. Rhyolite exposed in the core of the Peak Au mine largely contains inherited zircons that range in age from ～430–1500 Ma. A few euhedral zircons have an age of ～430 Ma and this is interpreted as a maximum date for the rock. Zircons from a syn‐D₃ chlorite‐muscovite replacement zone within the deposit have ²⁰⁶Pb/²³⁸U ages of ～410–650 Ma and are apparently inherited.     

The structural evolution of the Northern Hastings Block and southern Nambucca Block,southern New England Orogen,eastern Australia

The Hastings Block is a weakly cleaved and complexly folded and faulted terrain made up of Devonian, Carboniferous and Permian sedimentary and volcanic rocks. The map pattern of bedding suggests a major boundary exists that divides the Hastings Block into northern and southern parts. Bedding north of this boundary defines an upright box-like Parrabel Anticline that plunges gently northwest. Four cleavage/fold populations are recognised namely: E–W-striking, steeply dipping cleavage S₁ that is axial surface to gently to moderately E- or W-plunging; F₁ folds that were re-oriented during the formation of the Parrabel Anticline with less common N–S-trending, steeply dipping cleavage S₂, axial surface to gently to moderately N-plunging F₂ folds; poorly developed NW–SE-striking, steeply dipping cleavage S₃ axial surface to mesoscopic, mainly NW-plunging F₃ folds; and finally_, a weakly developed NE–SW-striking, steeply dipping S₄ cleavage formed axial surface to mainly NE-plunging F₄. The Parrabel Anticline is considered to have formed during the D₃ deformation. The more intense development of S₂ and S₃ on the western margin of the Northern Hastings Block reflects increasing strain related to major shortening of the sequences adjacent to the Tablelands Complex during the Hunter–Bowen Orogeny. The pattern of multiple deformation we have recorded is inconsistent with previous suggestions that the Hastings Block is part of an S-shaped orocline folded about near vertically plunging axes.     

Geochronology and geochemistry of the Devonian Gumbardo Formation (Adavale Basin): evidence for cratonisation of the Central Thomson Orogen by the Early Devonian

Abstract

The Devonian subsurface Adavale Basin occupies a central position in the Paleozoic central Thomson Orogen of eastern Australia and records its tectonic setting during this time interval. Here, we have focussed on the basal volcanics of the Gumbardo Formation to clarify the tectonic setting of the basin. The approach has been to undertake stratigraphic logging, LA-ICP-MS U–Pb zircon geochronology and whole-rock geochemical analysis. The data indicate that basin initiation was rapid occurring at ca 401?Ma. The volcanic rocks are dominated by K-feldspar phyric rhyodacitic ignimbrites. The whole-rock geochemical data indicate little evidence for extensive fractional crystallisation, with the volcanic suite resembling the composition of the upper continental crust and exhibiting transitional I- to A-type tectonomagmatic affinities. One new U–Pb zircon age revealed an Early Ordovician emplacement age for a volcanic rock previously interpreted to be part of the Early Devonian Gumbardo Formation, and older basement age is consistent with seismic interpretations of uplifted basement in this region of the western Adavale Basin. Five ignimbrites dated from different stratigraphic levels within the formation yield similar emplacement ages with a pooled weighted age of 398.2?±?1.9?Ma (mean square weighted deviation?=?0.94, n?=?93). Significant zircon inheritance in the volcanic rocks records reworking of Ordovician and Silurian silicic igneous basement from the Thomson Orogen and provides insight into the crustal make-up of the Thomson Orogen. Collectively, the new data presented here suggest the Adavale Basin is a cover-type basin that developed on a stabilised Thomson Orogen after the major Bindian deformation event in the late Silurian.     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

Abstract

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and westdipping, N-S to N20°-30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacilar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of leftlateral oblique slip of approximately 4.1 mm?year^?1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Variable hangingwall palaeotransport during Silurian and Devonian thrusting in the western Lachlan Fold Belt: Missing gold lodes,synchronous Melbourne Trough sedimentation and Grampians Group fold interference

The western margin of the Lachlan Fold Belt contains early ductile and brittle structures that formed during northeast‐southwest and east‐west compression, followed by reactivation related to sinistral wrenching. At Stawell all of these structural features (and the associated gold lodes) are dismembered by a complex array of later northwest‐, north‐ and northeast‐dipping faults. Detailed underground structural analysis has identified northwest‐trending mid‐Devonian thrusts (Tabberabberan) that post‐date Early Devonian plutonism and have a top‐to‐the‐southwest transport. Deformation associated with the initial stages of dismemberment occurred along an earlier array of faults that trend southwest‐northeast (or east‐west) and dip to the northwest (or north). The initial transport of the units in the hangingwall of these fault structures was top‐to‐the‐southeast. ‘Missing’ gold lodes were discovered beneath the Magdala orebody by reconstructing a displacement history that involved a combination of transport vectors (top‐to‐the‐southeast and top‐to‐the‐southwest). Fold interference structures in the adjacent Silurian Grampians Group provide further evidence for at least two almost orthogonal shortening regimes, post the mid‐Silurian. Overprinting relationships, and correlation with synchronous sedimentation in the Melbourne Trough, indicates that the early fault structures are mid‐ to late‐Silurian in age (Ludlow: ca 420–414 Ma). These atypical southeast‐vergent structures have regional extent and separate significant northeast‐southwest shortening that occurred in the mid‐Devonian (‘Tabberabberan orogeny’) and Late Ordovician (‘Benambran orogeny’).     

The evolution of the southern margin of the East European Craton based on seismic and potential field data

This paper presents an integrated geophysical study of the southern margin of the East European Craton (EEC) in the Karpinksy Swell-North Caucasus area. It presents new interpretations of deep refraction and wide-angle reflection “deep seismic sounding” (DSS) data as well as conventional seismic and CDP profiling and new analyses of potential field data, including three-dimensional gravity and magnetic modelling. An integrated model of the physical properties and structure of the Earth's crust and, partially, upper mantle displays distinct features that are related to tectonic history of the study area. The Voronezh Massif (VM), the Ukrainian Shield and Rostov Dome (RD) of the EEC as well as the Donbas Foldbelt (DF), Karpinsky Swell (KS), Scythian Plate (SP) and Precaspian Basin (PCB) constitute the geodynamic ensemble that developed on the southern margin of the continent Baltica. There proposed evolutionary model comprises a stage of rifting during the middle to late Devonian, post-rift extension and subsidence during Carboniferous–early Permian times (synchronous with and related to the southward displacement of the Rostov Dome and extension in a palaeo-Scythian back-arc basin), and subsequent Mesozoic and younger evolution. A pre-Ordovician, possibly Riphean (?), mafic magmatic complex is inferred on a near vertical reflection seismic cross-section through the western portion of the Astrakhan Dome in the southwest part of the Precaspian Basin. This complex combined with evidence of a subducting slab in the upper mantle imply the presence of pre-Ordovician (Riphean?) island arc, with synchronous extension in a Precaspian back-arc basin is suggested. A middle Palaeozoic back-arc basin ensemble in what is now the western Karpinsky Swell was more than 100 km to the south from its present location. The Stavropol High migrated northwards, dislocating and moving fragments of this back-arc basin sometime thereafter. Linear positive magnetic anomalies reflect the position of associated faults, which define the location of the eastern segment of the Karpinsky Swell. These faults, which dip northward, are recognised on crustal DSS profiles crossing the Donbas Foldbelt and Scythian Plate. They are interpreted in terms of compressional tectonics younger than the Hercynian stage of evolution (i.e., post-Palaeozoic).     

Stratigraphic architecture and depositional setting of the coarse‐grained Upper Cambrian Owen Conglomerate,West Coast Range,western Tasmania

The Upper Cambrian Owen Conglomerate of the West Coast Range, western Tasmania, comprises two upward‐fining successions of coarse‐grained siliciclastic rocks that exhibit a characteristic wedge‐shaped fill controlled by the basin‐margin fault system. Stratigraphy is defined by the informally named basal lower conglomerate member, middle sandstone member, middle conglomerate member and upper sandstone member. The lower conglomerate member has a gradational basal contact with underlying volcaniclastics of the Tyndall Group,while the upper sandstone member is largely conformable with overlying Gordon Group marine clastics and carbonates. The lower conglomerate member predominantly comprises high flow regime, coarse‐grained, alluvial‐slope channel successions, with prolonged channel bedload transport exhibited by the association of channel‐scour structures with upward‐fining packages of pebble, cobble and boulder conglomerate and sandstone, with abundant large‐scale cross‐beds derived from accretion in low‐sinuosity, multiply active braided‐channel complexes. While the dipslope of the basin is predominantly drained by west‐directed palaeoflow, intrabasinal faulting in the southern region of the basin led to stream capture and the subsequent development of axial through drainage patterns in the lower conglomerate member. The middle sandstone member is characterised by continued sandy alluvial slope deposition in the southern half of the basin, with pronounced west‐directed and local axial through drainage palaeoflow networks operating at the time. The middle sandstone member basin deepens considerably towards the north, where coarse‐grained alluvial‐slope deposits are replaced by coarse‐grained turbidites of thick submarine‐fan complexes. The middle conglomerate member comprises thickly bedded, coarse‐grained pebble and cobble conglomerate, deposited by a high flow regime fluvial system that focused deposition into a northern basin depocentre. An influx of volcanic detritus entered the middle conglomerate member basin via spatially restricted footwall‐derived fans on the western basin margin. Fluvial systems continued to operate during deposition of the upper sandstone member in the north of the basin, facilitated by multiply active, high flow regime channels, comprising thick, vertically stacked and upward‐fining, coarse‐grained conglomerate and sandstone deposits. The upper sandstone member in the south of the basin is characterised by extensive braid‐delta and fine‐grained nearshore deposits, with abundant bioturbation and pronounced bimodal palaeocurrent trends associated with tidal and nearshore reworking. An increase in base‐level in the Middle Ordovician culminated in marine transgression and subsequent deposition of Gordon Group clastics and carbonates.     

Architecture and evolution of the Kushiro submarine canyon in the Kurile Trench forearc slope,North‐western Pacific

An air‐gun survey, conducted over a total distance of 4356 km in the western end of the Kurile Arc offshore, has revealed the architecture and evolution of the Kushiro submarine canyon and Tokachi submarine channels of the Tokachi‐oki forearc basin. The Kushiro submarine canyon, which runs along the eastern margin of the forearc basin, is characterized by an entrenchment of up to several hundred metres in depth. The Tokachi submarine channels, by contrast, occupy the centre of the basin and consist of small, branching and levéed channels. The Kushiro submarine canyon is not connected to the Tokachi River, which has the largest drainage area in eastern Hokkaido, with a catchment area of approximately 9010 km² that includes high mountains and a volcanic region. Instead, the Kushiro submarine canyon exhibits an offset connection/quasi‐connection (probably having been connected during a prior sea‐level lowstand) with the Kushiro River (drainage area of 2500 km²) which contains the Kushiro Swamp at its mouth. To understand this unusual arrangement of rivers and submarine channels, acoustic facies analysis was undertaken to establish the seismic stratigraphy of the area. Subsurface strata can be divided into six seismic units of Miocene to Recent age. Analyses of seismic facies and isopach maps indicate that: (i) the palaeo‐Kushiro submarine canyon, which was ancestral to the Kushiro submarine canyon, was an aggradational levéed channel; and (ii) the palaeo‐Tokachi submarine channel was much larger than the present‐day channel and changed its course several times. Both the palaeo‐Kushiro submarine canyon and palaeo‐Tokachi submarine channel were fed predominantly by the ancestral Tokachi River, whereas the present‐day channels are no longer connected or quasi‐connected to the Tokachi River. Entrenchment of the Kushiro submarine canyon began in its distal reaches during the Early Pleistocene and propagated landward over time, which was possibly caused by base‐level fall (i.e. subsidence of the trench floor) or uplift of the forearc basin. Entrenchment of the upper part of the Kushiro submarine canyon began during the Middle Pleistocene, which may have been related to: (i) depositional progradation; (ii) uplift of the coastal area; or (iii) a change in source area from the ancestral Tokachi River to the Kushiro River.     

Tectonic evolution of a restricted ocean basin: the Powell Basin (Northeastern Antarctic Peninsula)

Abstract

The Powell Basin is one of the few present-day examples of a small isolated ocean basin largely surrounded by blocks of continental crust. The continental blocks in this basin result from the fragmentation of the northern Antarctic Peninsula. This basin was created by the eastward motion of the South Orkney microcontinent relative to the Antarctic Peninsula. The axial rift, identified by multichannel seismic profiles obtained during the HESANT 92/93 cruise, and the gravimetric anomalies of the basin plain, together with the transcurrent faults along the northern and southern margins, indicate a predominant WSW-ENE trend of basin extension. The South Orkney microcontinent was incorporated into the Antarctic Plate during the Miocene as a consequence of the end of basin spreading. The eastern and western margins are conjugate and have an intermediate crust in the region of transition to the basin plain. The differences in the basement structure and the architecture of the depositional units suggest that the extensional process was asymmetrical. The southern transtensive margin and the northern transcurrent margin are rectilinear and steep, without any intermediate crust in the narrow fault zone between the base of the continentalblocks slope and the oceanic crust. The multichannel seismic profiles across the central sector of the basin reveal a spreading axis with a double ridge and a central depression filled with sediments. The geometry of the reflectors in this depression indicates that the ponded deposits belong to the early stages of oceaniccrust accretion. This structure is similar to the overlapping spreading centres observed in fast-spreading oceanic axes, where the spreading axis has relay and overlapping segments.

The depositional units of the margins and basin plain have been grouped into four depositional sequences, comprising the classic stages in the formation of an ocean basin: pre-rift (S1), syn-rift (S2), syn-drift (S3), and post-drift (S4). The pre-rift sequence has deformed reflectors and is observed in the southern and eastern margins. The syn-rift sequence, tectonically disrupted, fills depressions bounded by faults and is well-developed in the eastern margin where it is truncated by an erosive surface identified as the break-up unconformity. The syn-drift sequence is wedge-shaped in the basin, thickening towards the margins and having onlap relations on the flanks of the spreading ridge. The post-drift sequence is the thickest unit and is characterised by a cyclic pattern of alternating packages of high-amplitude reflectors, very continuous, and low-amplitude reflectors. Towards the western and eastern margins, the same sequence has channel-levee complexes and channelised, wedged bodies attributed to turbiditic deposits of submarine fans derived from canyons located in the slope and outer shelf. The cyclic nature of this sequence is probably related to advancing and receding grounded ice sheets in the continental shelf since the latest Miocene.     

Seismotectonics of the 2008 and 2009 Qaidam Earthquakes and its Implication for Regional Tectonics

Three magnitude >6 earthquakes struck Qaidam, Qinghai province, China, in November 10th 2008, August 28th and 31st 2009 respectively. The Zongwulongshan fault has often been designated as the active seismogenic structure, although it is at odd with the data. Our continuous GPS station (CGPS), the Xiao Qaidam station, located in the north of the Qaidam basin, is less than 30 km to the southwest of the 2008 earthquake. This CGPS station recorded the near field co-seismic deformation. Here we analyzed the co-seismic dislocation based on the GPS time series and the rupture processes from focal mechanism for the three earthquakes. The aftershocks were relocated to constrain the spatial characteristics of the 2008 and 2009 Qaidam earthquakes. Field geological and geomorphological investigation and interpretation of satellite images show that the Xitieshan fault and Zongwulongshan fault were activated as left lateral thrust during the late Quaternary. Evidence of folding can also be identified. Integrated analyses based on our data and the regional tectonic environment show that the Xitieshan fault is the fault responsible for the 2008 Qaidam earthquake, which is a low dip angle thrust with left lateral strike slip. The Zongwulongshan fault is the seismogenic fault of the 2009 earthquakes, which is a south dipping back thrust of the northern marginal thrust system of the Qaidam basin. Folding takes a significant part of the deformation in the northern marginal thrust system of the Qaidam basin, dominating the contemporary structure style of the northern margin of the Qaidam basin and Qilianshan tectonic system. In this region, this fault and fold system dominates the earthquake activities with frequent small magnitude earthquakes.     

Granitic and monzonitic rocks dredged from the southeast Australian continental margin

Four Middle Devonian (381 Ma) granodiorite samples have been recovered from two dredge sites approximately 65 km east of Green Cape, New South Wales. The granodiorite samples are similar in age and composition to members of the Moruya Suite and probably form an along‐strike extension of that suite. The location of granodiorite on the southeastern margin requires that a piece of continental lithosphere was located to the present east of the study area in the Devonian. This piece of lithosphere may now be located somewhere on the western Lord Howe Rise.

A sample of Early Cretaceous leuco‐quartz monzodiorite was also recovered from a dredge site approximately 45 km north‐northeast of Dalmeny, New South Wales. It represents a body that was intruded at essentially the same time as, and is inferred to be of similar origin to, the syenite rocks of the nearby Mt Dromedary and Montague Island complexes.     

Multiphase structural evolution of the western margin of the Girardot subbasin, Upper Magdalena Valley, Colombia

More than 1400 km of two-dimensional seismic data were used to understand the geometries and structural evolution along the western margin of the Girardot Basin in the Upper Magdalena Valley. Horizons are calibrated against 50 wells and surface geological data (450 km of traverses). At the surface, low-angle dipping Miocene strata cover the central and eastern margins. The western margin is dominated by a series of en echelon synclines that expose Cretaceous–Oligocene strata. Most synclines are NNE–NE trending, whereas bounding thrusts are mainly NS oriented. Syncline margins are associated mostly with west-verging fold belts. These thrusts started deformation as early as the Eocene but were moderately to strongly reactivated during the Andean phase. The Girardot Basin fill records at least four stratigraphic sequences limited by unconformities. Several periods of structural deformation and uplifting and subsidence have affected the area. An early Tertiary deformation event is truncated by an Eocene unconformity along the western margin of the Girardot Basin. An Early Oligocene–Early Miocene folding and faulting event underlies the Miocene unconformity along the northern and eastern margin of the Girardot Basin. Finally, the Late Miocene–Pliocene Andean deformation folds and erodes the strata along the margins of the basin against the Central and Eastern Cordilleras.