共查询到20条相似文献,搜索用时 11 毫秒
1.
This paper makes a review of the interpretations of the tectonic evolution of SW Japan during the last three decades. In the late 1970s, the dominant model was the so-called “Pacific-type orogeny”, emphasizing the purported absence of nappes and the contrast with the alpine chains, and interpreting the evolution as due to a steady oceanic subduction since the Paleozoic time. In the 80s, the discovery of the actual structure made of a pile of large thrust sheets led authors to propose collisional models, involving the intermittent underthrusting of buoyant blocks like micro-continents. At the same time, the use of high-resolution biostratigraphy allowed several authors to recognize ancient accretionary wedges, with a reconstructed ocean plate stratigraphy of individual accreted units, especially in the Tanba and Shimanto zones. Also, precise radiometric dating permitted the distinction of metamorphosed units, especially in Sanbagawa and Shimanto belts. As a result of these new data, since the 1990s, the plate tectonic interpretation of the history of the Japanese Islands was revised by Japanese scientists and presented again in terms of accretionary processes linked to a steadily oceanic subduction, with an episodic ridge subduction: the so-called “Miyashiro-type orogeny”. The review of different data leads to the following conclusions. The structure of SW Japan is made of a pile of sub-horizontal nappes, polydeformed, with a geometry similar to the one encountered in collisional orogens. The geodynamic mechanisms advocated for the tectonic building within the accretionary orogeny concept (Miyashiro-type orogeny) are inappropriate. A permanent oceanic subduction with the intermittent “collision” (actually subduction) of an active ridge or seamount chain is unable to build such structures, as this process induces in fact an acceleration of the tectonic erosion and collapse of the upper plate; the underthrusting of a micro-continent or mature arc is likely needed. The exhumation story of Sanbagawa HP schists suggests the setting of a continental subduction. The petrological and new geochemical data from the literature strongly support the existence, beneath the nappes of accretionary complexes, of continental bodies showing affinities with South China, from which they were once separated. The episodic collision, underthrusting, of such blocks was responsible for the tectonic piling. Tectonic erosion plaid likely a major role in removing material during the intervening subduction stages. A revised geodynamic model, implying the collision of the Honshu, South Kitakami–Kurosegawa, and Shimanto Blocks, is proposed for explaining the three orogenic crises which took place respectively at around 240, 130, and 80–60 Ma ago in SW Japan. The paleogeographic position and affinity of the Hida block with surrounding units, in the hinterland, are still unclear. More work is needed to solve this question. 相似文献
2.
To better constrain the Early Paleozoic tectonic evolution of the western part of the Erguna–Xing’an Block, detrital zircon U–Pb dating was applied on the Ordovician to Devonian sedimentary strata along the southeast part of the China–Mongolia border. Most of the zircons from five sedimentary samples display fine-scale oscillatory growth zoning and Th/U ratios higher than 0.1, indicating a magmatic origin. All five Ordovician–Devonian samples display the similar age distribution patterns with age groups at ∼440 Ma, ∼510 Ma, ∼800 Ma, ∼950 Ma, and few Meso- to Paleo-Proterozoic and Neoarchean grains. This age distribution pattern is similar to those from adjacent blocks in the southeastern Central Asian Orogenic Belt. Considering previous tectonic studies, we propose bidirectional provenances from the Erguna–Xing’an Block and Baolidao Arc.Consequently, a new model was proposed to highlight the Early Paleozoic tectonic evolution of the western Erguna–Xing’an Block, which constrains two main Early Paleozoic tectonic events of the Xing-Meng Orogenic Belt: (a) pre-Late Cambrian collision between Erguna–Kerulen Block and Arigin Sum-Xilinhot-Xing’an Block; (b) the Early Paleozoic subduction of Paleo-Asian Ocean and pre-Late Devonian collision between Erguna–Xing’an Block and Songliao-Hunshandake Block. 相似文献
3.
《Journal of African Earth Sciences》2009,55(5):111-126
A single metapelitic sample from the Verbaard locality, near Messina was investigated in order to construct a P–T path and moreover, highlight pertinent contradictions in the current P–T database. Interpretations based on P–T pseudosections, garnet isopleth thermobarometry and mineral mode/isopleth modelling indicate that the mineral assemblages, textures and zonations developed in the metapelite formed along a single clockwise P–T path. The metamorphic evolution is characterized by an early high-pressure phase at 10–11 kbar/800 °C, followed by a simultaneous pressure decrease and temperature increase to ∼8/850 °C and subsequent retrogression via decompression-cooling to 4–5 kbar at T < 650 °C. Growth zoning in garnet provides evidence for an earlier, prograde history, however, as potential melt-loss was not accounted for this must be deemed speculative. The results of this study agree entirely with that of [Zeh, A., Klemd, R., Buhlmann, S., Barton, J.M. 2004. Pro- and retrograde P–T evolution of granulites of the Beit Bridge Complex (Limpopo Belt, South Africa); constraints from quantitative phase diagrams and geotectonic implications. Journal of Metamorphic Geology 22, 79–95], who adopted a similar approach to thermobarometry i.e. pseudosections. The results are, however, inconsistent with recent publications that argue for a twofold, metamorphic history defined by two decompression-cooling paths (DC1 ∼2.6 Ga and DC2 ∼2.0 Ga) that are separated by an isobaric heating path (∼2.0 Ga). The disparity in the results obtained from different workers can be explained by an examination of the thermobarometric methods employed. The methodology employed to derive the twofold, polymetamorphic P–T path appears to be erroneous. At present, the most reliable and robust method for determining P–T paths is the pseudosection approach to thermobarometry. Future modelling of Limpopo Belt granulites should adopt this strategy and ensure potential melt-loss is taken into account. Alternatively, this potential problem can be avoided altogether by investigating rocks of mafic composition. 相似文献
4.
The major and trace element, and Sr–Nd isotopic compositions of the Carboniferous Qi’eshan, Wutongwozi, and Yamansu volcanic rocks from the northern and southern parts of the Jueluotage Orogenic Belt in East Tianshan, China, were analysed to understand their genesis and geodynamic implications. The early Carboniferous Qi’eshan basalts are characterized by high Al2O3, with La/Sm (1.38–1.79) and Ba/La (27.06–58.76) values higher than those of typical normal mid-ocean ridge basalt. They are relatively enriched in large ion lithophile elements (LILE) and light rare earth elements (LREE), and depleted in high field strength elements. Overall, their initial Nd–Sr isotopic compositions are εNd(t) = (5.6–7.0) and Isr = 0.70397–0.70429, implying the magma originated from a mantle wedge source that was metasomatized by subduction-related fluids. In contrast, the late Carboniferous Wutongwozi basalts have lower Ba/La (4.86–12.82), La/Nb (0.87–2.45), and LILE concentrations. They have the isotopic characteristics of depleted asthenosphere, relatively high and heterogeneous εNd(t) (9.3–9.4), and high Isr (0.70471–0.70533). Thus, the late Carboniferous Wutongwozi basalts may have been derived from the partial melting of mantle sources during asthenospheric upwelling. The early Carboniferous Yamansu acid volcanic rocks are characterized by high Mg# (46–48) and Lu/Y (~0.15), and low K2O/Na2O (0.01–0.20), similar to M-type granites. However, their εNd(t) (5.0–5.5) and Isr (0.70642–0.70768) values are lower than those of depleted mantle, indicating they were contaminated by lower crustal material. The magma source originated from a mantle-derived magma that was contaminated by middle Tianshan massif in a continental margin arc setting. Based on the results and previous field-based studies, we conclude that the Carboniferous volcanics in the Jueluotage Orogenic Belt formed in a complex trench–arc–basin setting in the Kuguertage–Aqikuduke Suture Zone. 相似文献
5.
J.B. Rodrigues M.M. Pimentel B. Buhn M. Matteini M.A. Dardenne C.J.S. Alvarenga R.A. Armstrong 《Gondwana Research》2012,21(2-3):439-450
The Vazante Group show varied U–Pb provenance patterns along the basin. Zircon ages range from 936 to 3409 Ma, but Paleo- and Mesoproterozoic terrains constitute the main sources of the original sediments. The youngest population (~ 930 Ma) establishes the maximum depositional age of the group. Sm–Nd TDM data show the predominance of Paleoproterozoic ages (1.90–2.08 Ga) and also indicate some input from younger sources in rocks of the Lapa Formation (1.67 to 2.0 Ga) in the upper part of the group, whereas rocks of the Serra do Garrote Formation present the oldest model ages (2.03 to 2.76 Ga). Hf isotopic compositions of the detrital zircons indicate that they were derived mainly from recycled Paleoproterozoic crust with a minor Mesoproteroic juvenile component. Terranes within the São Francisco Craton represent the main sources of detrital sediments of this group and reinforce the interpretation that it may be a passive margin sequence developed along the western margin of the original continent. However, the origin of Mesoproterozoic grains remains uncertain. Slightly younger Sm–Nd model ages in the Lapa Formation, however, are not entirely consistent with derivation solely from the craton and may indicate contribution from younger sources, such as the Neoproterozoic Goiás Magmatic Arc. 相似文献
6.
This paper presents a review of available petrological, geochonological and geochemical data for late Mesozoic to Recent igneous rocks in the South China Sea (SCS) and adjacent regions and a discussion of their petrogeneses and tectonic implications. The integration of these data with available geophysical and other geologic information led to the following tectono-magmatic model for the evolution of the SCS region. The geochemical characteristics of late Mesozoic granitic rocks in the Pearl River Mouth Basin (PRMB), micro-blocks in the SCS, the offshore continental shelf and Dalat zone in southern Vietnam, and the Schwaner Mountains in West Kalimantan, Borneo indicate that these are mainly I-type granites plus a small amount of S-type granites in the PRMB. These granitoids were formed in a continental arc tectonic setting, consistent with the ideas proposed by Holloway (1982) and Taylor and Hayes, 1980, Taylor and Hayes, 1983, that there existed an Andean-type volcanic arc during later Mesozoic era in the SCS region. The geochonological and geochemical characteristics of the volcanics indicate an early period of bimodal volcanism (60–43 Ma or 32 Ma) at the northern margin of the SCS, followed by a period of relatively passive style volcanism during Cenozoic seafloor spreading (37 or 30–16 Ma) within the SCS, and post-spreading volcanism (tholeiitic series at 17–8 Ma, followed by alkali series from 8 Ma to present) in the entire SCS region. The geodynamic setting of the earlier volcanics was an extensional regime, which resulted from the collision between India and Eurasian plates since the earliest Cenozoic, and that of the post-spreading volcanics may be related to mantle plume magmatism in Hainan Island. In addition, the nascent Hainan plume may have played a significant role in the extension along the northern margin and seafloor spreading in the SCS. 相似文献
7.
《Precambrian Research》1999,93(2-3):181-199
The Wutai Complex represents the best preserved granite-greenstone terrane in the North China Craton. The complex comprises a sequence of metamorphosed ultramafic to felsic volcanic rocks, variably deformed granitoid rocks, along with lesser amounts of siliciclastic and carbonate rocks and banded iron formations. Petrological evidence from the Wutai amphibolites indicates four metamorphic evolutionary stages. The M1 assemblage is composed of plagioclase+quartz+actinolite+chlorite+epidote+biotite+rutile, preserved as mineral inclusions in garnet porphyroblasts. The metamorphic conditions for this assemblage cannot be quantitatively estimated. The M2 stage is represented by garnet porphyroblasts in a matrix of quartz, plagioclase, amphibole, biotite, rutile and ilmenite. P–T conditions for this assemblage have been estimated using the program Tweequ at 10–12 kbar and 600–650°C. The M3 assemblage is shown by amphibole+plagioclase±ilmenite symplectic coronas around embayed garnets and yields P–T conditions of 6.0–7.0 kbar and 600–650°C. M4 is represented by chlorite and epidote rimming garnet, chlorite rimming amphibole and epidote replacing plagioclase under greenschist-facies conditions of 400–500°C and relatively lower pressures. Taken together, the qualitative P–T estimates from M1 and M4 and the quantitative P–T estimates from M2 and M3 define a clockwise P–T path for the Wutai amphibolites.The estimated P–T path from the four stages suggests that the Wutai Complex underwent initial burial and crustal thickening (M1+M2), subsequent isothermal exhumation (M3), and finally cooling and retrogression (M4). This tectonothermal path, along with those of the Fuping and Hengshan complexes, which bound the southeast and northwest margins, respectively, of the Wutai Complex, is considered to record the early Paleoproterozoic collision between the eastern and western segments of the North China craton. 相似文献
8.
Arne P. Willner Axel Gerdes Hans-Joachim Massonne Alexander Schmidt Masafumi Sudo Stuart N. Thomson Graciela Vujovich 《Contributions to Mineralogy and Petrology》2011,162(2):303-327
The Guarguaraz Complex in West Argentina formed during collision between the microplate Chilenia and South America. It is
composed of neritic clastic metasediments with intercalations of metabasic and ultrabasic rocks of oceanic origin. Prograde
garnet growth in metapelite and metabasite occurred between 1.2 GPa, 470°C and 1.4 GPa, 530°C, when the penetrative s2-foliation was formed. The average age of garnet crystallization of 390 ± 2 Ma (2σ) was determined from three four-point Lu–Hf
mineral isochrones from metapelite and metabasite samples and represents the time of collision. Peak pressure conditions are
followed by a decompression path with slight heating at 0.5 GPa, 560°C. Fluid release during decompression caused equilibration
of mineral compositions at the rims and also aided Ar diffusion. An 40Ar/39Ar plateau age of white mica at 353 ± 1 Ma (1σ) indicates the time of cooling below 350–400°C. These temperatures were attained
at pressures of 0.2–0.3 GPa, indicative of an average exhumation rate of ≥1 mm/a for the period 390–353 Ma. Late hydrous influx
at 0.1–0.3 GPa caused pervasive growth of sericite and chlorite and reset the Ar/Ar ages of earlier coarse-grained white mica.
At 284–295 Ma, the entire basement cooled below 280°C (fission track ages of zircon) after abundant post-collisional granitoid
intrusion. The deeply buried epicontinental sedimentary rocks, the high peak pressure referring to a low metamorphic geotherm
of 10–12°C/km, and the decompression/heating path are characteristics of material buried and exhumed within a (micro) continent–continent
collisional setting. 相似文献
9.
The medium-tonnage Sarsuk polymetallic Au deposit is located in the Devonian volcanic–sedimentary Ashele Basin of the south Altay Orogenic Belt (AOB), Northwest China. Within the deposit, the rhyolite porphyries and diabases are widespread, emplaced into strata. The orebodies are hosted by the rhyolite porphyries. We studied the petrography, geochemistry, and Sr–Nd–Hf isotopes of the rhyolite porphyries and diabases, in order to understand the petrogenesis of these rocks and their tectonic significance. They display typical bimodality in geochemistry compositions. The diabases are characterized by SiO2 contents of 44.84–59.77 wt.%, high Mg# values (43–69), enrichment in large ion lithophile elements (LILE) and light rare earth elements (LREE), depletion in Nb and Ta, low (87Sr/86Sr)i (0.706687–0.707613) values, positive εNd(t) (4.8–6.8) values, and positive and high εHf(t) (7.15–15.19) values, suggesting a depleted lithosphere mantle source that might have been metasomatized by subduction-related components. The rhyolite porphyries show affinity to sanukitoid magmas contents [high SiO2 (78.6–81.82 wt.%) and MgO (3.38–5.94 wt.%, one sample at 0.61 wt.%), and enrichments in LILE and LREE], they were derived from the equilibrium reactions between a mantle source and subducted oceanic crust materials. Those characteristics together with the positive εNd(t) (4.1–8.4) and εHf(t) (2.88–15.17) values indicate that the diabases and rhyolite porphyries were generated from the same mantle peridotite source. But the rhyolite porphyries underwent fractional crystallization of Fe–Ti oxides, plagioclase, and apatite due to their negative Eu (δEu = 0.21–0.28) and P anomalies. According to the geochemical and isotopic data, the Sarsuk Middle Devonian igneous rocks are considered to be the products of the juvenile crustal growth in an island arc setting. The Sarsuk polymetallic Au deposit formed slightly later than the Ashele Cu–Zn deposit in the Ashele Basin, but they have the same tectonic setting, belonging to the trench–arc–basin system during extensional process in the south AOB. 相似文献
10.
11.
12.
13.
14.
15.
This paper reports results from detrital zircon U–Pb geochronology, Hf isotopic geochemistry, sandstone modal analysis, and palaeocurrent analysis of the early Mesozoic strata within the Ningwu basin, China, with the aims of constraining the depositional ages and sedimentary provenances and shedding new light on the Mesozoic tectonic evolution of the northcentral North China Craton (NCC). The zircons from early Mesozoic sandstones are characterized by three major populations: Phanerozoic (late Palaeozoic and early Mesozoic), late Palaeoproterozoic (with a peak at approximately 1.8 Ga), and Neoarchaean (with a peak at approximately 2.5 Ga). Notably, three Phanerozoic zircons in the Early Triassic Liujiagou Formation were found to have positive εHf(t) values and characteristics typical of zircons from the Central Asian Orogenic Belt (CAOB). Therefore, the CAOB began to represent the provenance of sediment in the sedimentary basins in the northern NCC no later than the Early Triassic (261 Ma), implying that the final amalgamation of the NCC and CAOB occurred before the Early Triassic. The U–Pb geochronologic and Hf isotopic results show that the Lower Middle Triassic sediments were mainly sourced from the Yinshan–Yanshan Orogenic Belt (YYOB), and that a sudden change in provenances occurred, shifting from a mixed YYOB and CAOB source in the Middle Jurassic to a primarily YYOB source in the Late Jurassic. The results of the sandstone modal analysis suggest that the majority of the samples from the Lower Middle Jurassic rocks were derived from either Continental Block or Recycled Orogen sources, whereas all the samples from the Upper Jurassic rocks were derived from Mixed sources. The change in source might be ascribed to the southward subduction and closure of the Okhotsk Ocean and the resulting intense uplift of the YYOB during the Late Jurassic. This uplift likely represents the start of the Yanshan Orogeny. 相似文献
16.
Contention surrounds the Ediacaran–Cambrian geodynamic evolution of the palaeo-Pacific margin of Gondwana as it underwent a transition from passive to active margin tectonics. In Australia, disagreement stems from conflicting geodynamic models for the Delamerian Orogen, which differ in the polarity of subduction and the state of the subduction hinge (i.e., stationary or retreating). This study tests competing models of the Delamerian Orogen through reconstructing Ediacaran–Cambrian basin evolution in the Koonenberry Belt, Australia. This was done through characterising the mineral and U–Pb detrital zircon age provenance of sediments deposited during postulated passive and active margin stages. Based on these data, we present a new basin evolution model for the Koonenberry Belt, which also impacts palaeogeographic models of Australia and East Gondwana. Our basin evolution and palaeogeographic model is composed of four main stages, namely: (i) Ediacaran passive margin stage with sediments derived from the Musgrave Province; (ii) Middle Cambrian (517–500 Ma) convergent margin stage with sediments derived from collisional orogens in central Gondwana (i.e., the Maud Belt of East Antarctica) and deposited in a backarc setting; (iii) crustal shortening during the c. 500 Ma Delamerian Orogeny, and; (iv) Middle to Late Cambrian–Ordovician stage with sediments sourced from the local basement and 520–490 Ma igneous rocks and deposited into post-orogenic pull-apart basins. Based on this new basin evolution model we propose a new geodynamic model for the Cambrian evolution of the Koonenberry Belt where: (i) the initiation of a west-dipping subduction zone at c. 517 Ma was associated with incipient calc-alkaline magmatism (Mount Wright Volcanics) and deposition of the Teltawongee and Ponto groups; (ii) immediate east-directed retreat of the subduction zone positioned the Koonenberry Belt in a backarc basin setting (517 to 500 Ma), which became a depocentre for continued deposition of the Teltawongee and Ponto groups; (iii) inversion of the backarc basin during the c. 500 Delamerian Orogeny was driven by increased upper and low plate coupling caused by the arrival of a lower plate asperity to the subduction hinge, and; (iv) subduction of the asperity resulted in renewed rollback and upper plate extension, leading to the development of small, post-orogenic pull-apart basins that received locally derived detritus. 相似文献
17.
This paper gives a brief review of what I consider as the state of the art regarding the largely accepted data and ideas concerning the Proterozoic to Early Paleozoic tectonic evolution of South China. The South China craton was built by the welding of the Yangtze and Cathaysia blocks, with a different previous history giving a different pre-Neoproterozoic basement composition, due to the Jiangnan (Jinning, Sibao) orogeny. This Jiangnan orogeny was a collisional event, induced by the consumption of an intervening oceanic domain by subduction beneath the Yangzte plate. The evolution involved a volcanic arc on the Yangtze active margin, active from ca. 980 Ma to ca. 850 Ma, the subsequent collision beginning at around 870–860 Ma and responsible for the emplacement of thrust sheets of ophiolitic mélange (dated around 1000–900 Ma) and blueschists (900–870 Ma), followed by late- to post-collisional granitic plutonism (840–800 Ma). The newly amalgamated South China craton suffered from rifting, starting around 850 Ma, marked by mafic–ultramafic magmatism until ca. 750 Ma. The Nanhua rift basin evolved with a thick sedimentation in its middle part until the Ordovician. South China was affected by the Early Paleozoic orogeny (mainly Silurian), characterized by a strong quasi-symmetrical intracontinental shortening, involving the sedimentary cover of the rift and its margins as well as the basement, leading to crustal thickening. This crustal thickening induced an important anatexis and emplacement of peraluminous granites during the Silurian. Unlike the Jiangnan orogeny, which was of collisional type, the Early Paleozoic one was a bit similar to a Pyrenean intracontinental type.Some pending problems need further research for clarification, for example: the location and timing of integration of South China within Rodinia, the triggering factor of the Early Paleozoic orogeny, the mapping of the contacts bounding the Lower Paleozoic thrust sheets responsible for the crustal thickening. 相似文献
18.
《Journal of South American Earth Sciences》2000,13(4-5):443-457
Stratigraphic assessment of the “Tierra Caliente Metamorphic Complex” (TCMC) between Arcelia and Teloloapan in southern Mexico, based on photo interpretation of Landsat Thematic Mapper images and field mapping at the 1:100,000 scale, tests different tectonic evolution scenarios that bear directly on the evolution of the southern North American plate margin. The regional geology, emphasizing the stratigraphy of a portion of the TCMC within the area between Arcelia and Teloloapan is presented. Stratigraphic relationships with units in adjacent areas are also described. The base of the stratigraphic section is a chlorite grade metamorphic sequence that includes the Taxco Schist, the Roca Verde Taxco Viejo Formation, and the Almoloya Phyllite Formation. These metamorphic units, as thick as 2.7 km, are covered disconformably by a sedimentary sequence, 2.9 km thick, composed of the Cretaceous marine Pochote, Morelos, and Mexcala Formations, as well as undifferentiated Tertiary continental red beds and volcanic rocks. The geology may be explained as the evolution of Mesozoic volcanic and sedimentary environments developed upon attenuated continental crust. Our results do not support accretion of the Guerrero terrane during Laramide (Late Cretaceous–Paleogene) time. 相似文献
19.
《Gondwana Research》2014,26(4):1627-1643
The Tianshan Orogenic Belt, which is located in the southwestern part of the Central Asian Orogenic Belt (CAOB), is an important component in the reconstruction of the tectonic evolution of the CAOB. In order to examine the evolution of the Tianshan Orogenic Belt, we performed detrital zircon U–Pb dating analyses of sediments from the accretionary mélange from Chinese southwestern Tianshan in this study. A total of 542 analyzed spots on 541 zircon grains from five samples yield Paleoarchean to Devonian ages. The major age groups are 2520–2400 Ma, 1890–1600 Ma, 1168–651 Ma, and 490–390 Ma. Provenance analysis indicates that, the Precambrian detrital zircons were probably mainly derived from the paleo-Kazakhstan continent formed before the Early Silurian by amalgamation of the Kazakhstan–Yili microplate, the Chinese central Tianshan terrane and the Kyrgyz North and Middle Tianshan blocks, while detrital zircons with Paleozoic ages mainly from igneous rocks of the continental arc generated by the northward subduction of the south Tianshan paleocean. The age data correspond to four tectono-thermal events that took place in these small blocks, i.e., the continental nucleus growth during the Late Neoarchean–early Paleoproterozoic (~ 2.5 Ga), the evolution of the supercontinents Columbia (2.1–1.6 Ga) and Rodinia (1.3–0.57 Ga), and the arc magmatism related with the Phanerozoic orogeny. The Precambrian zircons show a similar age pattern as the Tarim and the Cathaysia cratons and the Eastern India–Eastern Antarctica block but differ from those of Siberia distinctly. Therefore, the Tianshan region blocks and the Kazakhstan–Yili microplate have a close affinity to the eastern paleo-Gondwana fragments, but were not derived from the Siberia craton as proposed by some previous researchers. These blocks were likely generated by rifting accompanying Rodinia break-up in late Precambrian times.The youngest ages of the detrital zircons from the subduction mélange show a maximum depositional age of ca. 390 Ma. It is coeval with the end of an earlier arc magmatic pulse (440–390 Ma) but a bit older than a younger one at 360–320 Ma and nearly 70–80 Ma older than the HP–UHP metamorphism in the subduction zone (320–310 Ma). 相似文献
20.
This paper reports U–Pb–Hf isotopes of detrital zircons from Late Triassic–Jurassic sediments in the Ordos, Ningwu, and Jiyuan basins in the western-central North China Craton (NCC), with the aim of constraining the paleogeographic evolution of the NCC during the Late Triassic–Jurassic. The early Late Triassic samples have three groups of detrital zircons (238–363 Ma, 1.5–2.1 Ga, and 2.2–2.6 Ga), while the latest Late Triassic and Jurassic samples contain four groups of detrital zircons (154–397 Ma, 414–511 Ma, 1.6–2.0 Ga, and 2.2–2.6 Ga). The Precambrian zircons in the Late Triassic–Jurassic samples were sourced from the basement rocks and pre-Late Triassic sediments in the NCC. But the initial source for the 238–363 Ma zircons in the early Late Triassic samples is the Yinshan–Yanshan Orogenic Belt (YYOB), consistent with their negative zircon εHf(t) values (−24 to −2). For the latest Late Triassic and Jurassic samples, the initial source for the 414–511 Ma zircons with εHf(t) values of −18 to +9 is the Northern Qinling Orogen (NQO), and that for the 154–397 Ma zircons with εHf(t) values of −25 to +12 is the YYOB and the southeastern Central Asian Orogenic Belt (CAOB). In combination with previous data of late Paleozoic–Early Triassic sediments in the western-central NCC and Permian–Jurassic sediments in the eastern NCC, this study reveals two shifts in detrital source from the late Paleozoic to Jurassic. In the Late Permian–Early Triassic, the western-central NCC received detritus from the YYOB, southeastern CAOB and NQO. However, in the early Late Triassic, detritus from the CAOB and NQO were sparse in basins located in the western-central NCC, especially in the Yan’an area of the Ordos Basin. We interpret such a shift of detrital source as result of the uplift of the eastern NCC in the Late Triassic. In the latest Late Triassic–Jurassic, the southeastern CAOB and the NQO restarted to be source regions for basins in the western-central NCC, as well as for basins in the eastern NCC. The second shift in detrital source suggests elevation of the orogens surrounding the NCC and subsidence of the eastern NCC in the Jurassic, arguing against the presence of a paleo-plateau in the eastern NCC at that time. It would be subsidence rather than elevation of the eastern NCC in the Jurassic, due to roll-back of the subducted paleo-Pacific plate and consequent upwelling of asthenospheric mantle. 相似文献