On some new statistical characteristics of the wind “Koshava”

Summary Koshava is a gusty wind of moderate to strong intensity, blowing from the south-eastern direction, over the area of the Republic of Serbia. It is caused by the interaction between the synoptic circulation and the orography of the Carpathian and the Balkan mountains. The Koshava wind can damage buildings, factories and industrial plants or city infrastructure. Therefore it is important to estimate its gust and the gustiness factor on the basis of the measured data.This paper discusses a statistical analysis of wind data in the maximum influence area of the Koshava wind in the periods of maximum duration of Koshava. The focus of the paper is the examination of urban and suburban effects on Koshava wind and the correlation between the instantaneous maximum wind speed and the hourly mean wind speed. The best fitting with various empirical distributions is proposed.With 10 Figures     

A study of the sensitivity of bare soil evaporation schemes to soil surface wetness,using the coupled soil moisture and surface temperature prediction model,BARESOIL

Summary The performance of evaporation schemes with and approach and their combination within resistance representation of evaporation from bare soil surface is discussed. For this purpose nine schemes, based on different functions of or , on the ratio of the volumetric soil moisture content and its saturated value are used.The quality of the chosen schemes has been evaluated using the results of time integration by the coupled soil moisture and surface temperature prediction model, BARESOIL, using in situ data. A sensitivity analysis was made using two sets of data derived from the volumetric soil moisture content of the top soil layer. One with values below the wilting point (0.17 m³m^–3) and the second with values above 0.20m³m^–3. Data sets were obtained at the experimental site Rimski anevi, Yugoslavia, from the bare surface of a chernozem soil.With 4 Figures     

The validation of various schemes for parameterizing evaporation from bare soil for use in meteorological models: A numerical study using in situ data

Parameterization of evaporation from a non-plant-covered surface is very important in the hierarchy strategy of modelling land surface processes. One of the representations frequently used in its computation is the resistance formulation. The performance of the evaporation schemes using the , , and their combination resistance approaches to parameterize evaporation from bare soil surfaces is discussed. For that purpose, the nine schemes, based on a different dependence of and on volumetric soil moisture content and its saturated value, are used.The tests of performances of the considered schemes are based on time integrations by the land surface module (BARESOIL) using observed data. The 23 data sets at a bare surface experimental site in Rimski anevi, Yugoslavia on chernozem soil, were used for the resistance algorithm evaluation. The quality of the schemes was compared with the observed values of the latent heat flux using several statistical parameters.     

Bioaccumulation of Cobalt in Parmelia sulcata

Six locations across mainland Portugal were selected for exposing Parmelia sulcata, for a one-year period (8 months for one site), with simultaneous measurement of total (dry + wet) deposition (one-month periods). The exposed lichens and the total (dry + wet) deposition were analysed for cobalt contents by INAA (instrumental neutron activation analysis) and ICP-MS (inductively coupled plasma mass spectroscopy), respectively. The designated wet deposition was evaluated through the collected water volume; the designated dry deposition was assessed after the (dried) residual mass of the wet deposition. An excellent agreement between Co contents in exposed lichens and the cumulative (1) Co contents in the dry deposition, (2) dry deposition, and (3) wet deposition has been found for the locations with alternate drought and precipitation months, high dry deposition, and high Co contents in the latter. Continuous rainfall was found to hinder the Co accumulation in the lichen due to its release from the lichen and/or lower Co contents in the dry deposition. At three locations, P. sulcata Co contents, after subtraction of the background (before exposure), equalled or exceeded the Co contents in the cumulative dry deposition at the end of the exposure time. The optimal exposure period for this species likely depends on the exposure conditions.     

ALPEX-Simulation

Summary In a project ALPEX-Simulation, sponsored by the Österreichischer Fond zur Förderung der wissenschaftlichen Forschung (FWF), all eight cases of ALPEX-SOP cyclones were numerically simulated with a fine mesh isentropic model of the atmosphere. These numerical simulations in six-hourly intervals allow a deeper insight into the synoptics and dynamics of the cyclogeneses in the Western Mediterranean, especially into the genesis of the two basic types of cyclones: the so-called Überströmungs-type and Vorderseiten-type. In the first phase of cyclogenesis of the Überströmungs-type, the blocking and flow splitting of the cold air due to the Alps and the canalization between the Alps and the Massif Central are important. Cold air flows cyclonically around the western part of the Alps, creating a vorticity maximum at the south western edge of the Alpine, bow and leads also to an enhanced PV. In connection with warm air in the Mediterranean, a strong baroclinic zone is generated. The interaction between the arriving PV maximum in the upper troposphere and the enhanced PV at the bottom leads to cyclogenesis in the Western Mediterranean. In the case of the Vorderseiten-type warm air advection dominates with the exception of a shallow layer of cold air in the inner Po-Valley, which is shielded by the Alpine ridge. A well-pronounced PV maximum builds up and couples with the PV maximum arriving at upper levels, even before the cold air, coming from the north-west, has surrounded the Alps. The cold air only intensifies the development by raising the baroclinity. Therefore, the Vorderseiten-cyclogenesis is an orographically modified cyclogenesis, in the course of which the cyclonic development is triggered by the Alps, whereas the Überströmungs-cyclogenesis is an orographically induced cyclogenesis i.e. a true lee cyclogenesis.With 14 FiguresDied in a tragic traffic accident on June 6, 1993.     

Application of a “Big-Tree” model to regional climate modeling: a sensitivity study

Summary ¶In order to better understand land-atmosphere interactions and increase the predictability of climate models, it is important to investigate the role of forest representation in climate modeling. Corresponding to the big-leaf model commonly employed in land surface schemes to represent the effects of a forest, a so called big-tree model, which uses multi-layer vegetation to represent the vertical canopy heterogeneity, was introduced and incorporated into the National Center for Atmospheric Research (NCAR) regional climate model RegCM2, to make the vegetation model more physically based. Using this augmented RegCM2 and station data for China during 1991 Meiyu season, we performed 10 experiments to investigate the effects of the application of the big-tree model on the summer monsoon climate.With the big-tree model incorporated into the regional climate model, some climate characteristics, e.g. the 3-month-mean surface temperature, circulation, and precipitation, are significantly and systematically changed over the model domain, and the change of the characteristics differs depending on the area. Due to the better representation of the shading effect in the big-tree model, the temperature of the lower layer atmosphere above the plant canopy is increased, which further influences the 850hPa temperature. In addition, there are significant decreases in the mean latent heat fluxes (within 20–30W/m²) in the three areas of the model domain.The application of the big-tree model influences not only the simulated climate of the forested area, but also that of the whole model domain, and its impact is greater on the lower atmosphere than on the upper atmosphere. The simulated rainfall and surface temperature deviate from the originally simulated result and are (or seem to be) closer to the observations, which implies that an appropriate representation of the big-tree model may improve the simulation of the summer monsoon climate.We also find that the simulated climate is sensitive to some big-tree parameter values and schemes, such as the shape, height, zero-plane displacement height and mixing-length scheme. The simulated local/grid differences may be very large although the simulated areal-average differences may be much lower. The area-average differences in the monthly-mean surface temperature and heat fluxes can amount to 0.5°C and 4W/m², respectively, which correspond to maximum local/grid differences of 3.0°C and 40W/m² respectively. It seems that the simulated climate is most sensitive to the parameter of the zero-plane displacement among the parameters studied.     

Northern hemisphere atmospheric response to changes of atlantic ocean SST on decadal time scales: a GCM experiment

Analyses indicate that the Atlantic Ocean seasurface temperature (SST) was considerably colder at the beginning than in the middle of the century. In parallel, a systematic change in the North Atlantic sea-level pressure (SLP) pattern was observed. To find out whether the SST and SLP changes analyzed are consistent, which would indicate that the SST change was real and not an instrumental artifact, a response experiment with a low-resolution (T21) atmospheric GCM was performed. Two perpetual January simulations were conducted, which differ solely in the Atlantic Ocean (40° S-60° N) SST: the cold simulation utilizes the SSTs for the period 1904–1913; the warm simulation uses the SSTs for the period 1951–1960. Also, a control run with the model's standard SST somewhat between the cold and warm SST was made. For the response analysis, a rigorous statistical approach was taken. First, the null hypothesis of identical horizontal distributions was subjected to a multivariate significance test. Second, the level of recurrence was estimated. The multivariate statistical approaches are based on hierarchies of test models. We examined three different hierarchies: a scale-dependent hierarchy based on spherical harmonics (S), and two physically motivated ones, one based on the barotropic normal modes of the mean 300 hPa flow (B) and one based on the eigenmodes of the advection diffusion operator at 1000 hPa (A). The intercomparison of the cold and warm experiments indicates a signal in the geostrophic stream function that in the S-hierarchy is significantly nonzero and highly recurrent. In the A-hierarchy, the low level temperature field is identified as being significantly and recurrently affected by the altered SST distribution. The SLP signal is reasonably similar to the SLP change observed. Unexpectedly, the upper level stream-function signal does not appear to be significantly nonzero in the B-hierarchy. If, however, the pairs of experiments warm versus control and cold versus control are examined in the B-hierarchy, a highly significant and recurrent signal emerges. We conclude that the cold versus warm response is not a small disturbance that would allow the signal to be described by eigenmodes of the linear system. An analysis of the three-dimensional structure of the signal leads to the hypothesis that two different mechanisms are acting to modify the model's mean state. At low levels, local heating and advection are dominant, but at upper levels the extratropical signal is a remote responce to modifications of the tropical convection.This paper was presented at the International Conference on Modelling of Global Climate Change and Variability, held in Hamburg 11–15 September 1989 under the auspices of the Meteorological Institute of the University of Hamburg and the Max Planck Institute for Meteorology. Guest Editor for these papers is Dr. L. Dilmenil.AWI Publication no. 254     

On Trajectory Curvature as a Selection Criterion for Valid Lagrangian Stochastic Dispersion Models

Recently Wilson and Flesch (Boundary-Layer Meteorology, 84, 411-426, 1997) suggested that the average increment d z to the orientation = arctan(w/u) of the Lagrangian velocity-fluctuation vector can be used to distinguish the better Lagrangian stochastic models within the well-mixed class. Here it is demonstrated that the specification of d z constitutes neither a sufficient or universally applicable criterion to distinguish the better Lagrangian stochastic models within the well-mixed class. The hypothesis made by Wilson and Flesch that Lagrangian stochastic models with /P_E irrotational are zero-spin models, having d z=0, is proven     

Stable boundary layers: Observations,models and variability part I: Modelling and measurements

Selected field measurements of evening stable boundary layers are presented in detail comparable with published Large Eddy Simulation results. Such models appear to match idealized theories more closely than do some boundary-layer observations. Any attempt to compare detailed observations with idealized models therefore highlights the variability of the real boundary layer.Here direct turbulence measurements across the stable boundary layer from a heterogeneous and an ideal site are contrasted. Recommendations are made for the information needed to distinguish heterogeneous and ideal cases.The companion paper (Part II) discusses further the issues of data, analysis in the presence of variability, and the effects of averaging over heterogeneous terrain.Part of UK Meteorological Office Atmospheric Process Research Division.     

Hidden information within series of measurements — four examples from atmospheric science

Whether in classical networks such as meteorological networks of in more recent ones of atmospheric chemistry, a wealth of data is at hand. These data have been evaluated in a manner depending on the purpose of the network. However, much more information is hidden in these time series and waits for discovery. Only the imagination of scientists is needed. Four examples are given which lead to new information about the atmospheric aerosol and the behaviour of the atmosphere. These examples are: Atmospheric turbidity from sunshine recordings, Meteorological drainage area from the variance of observations, Location of point sources from air mass trajectories, and Total vertical ozone from turbidity measurements.     

Transport-Dissipation Analytical Solutions to the E-∈Turbulence Model and their Role in Predictions of the Neutral ABL

E- turbulence model predictions of the neutralatmospheric boundary layer (NABL) are reinvestigated to determine thecause for turbulence overpredictions found in previous applications. Analytical solutions to the coupled E and equations for the case of steady balance between transport and dissipation terms, the dominant balance just below the NABL top, are derived. It is found that analytical turbulence profiles laminarizeat a finite height only for values of closure parameter ratio c ₂ /_e equal toor slightly greater than one, with laminarization as z for greater . The point = 2 is additionally foundthat where analytical turbulent length scale (l) profilesmade a transition from ones ofdecreasing ( < 2) to increasing ( > 2)values with height. Numerically predicted profiles near the NABL topare consistent with analytical findings. The height-increasingvalues of l predicted throughout the NABL with standard values ofclosure parameters thus appear a consequence of 2.5(> 2), implied by these values (c ₂ = 1.92, _{= 1.3}, _{e = 1}). Comparison of numericalpredictions with DNS data shows that turbulence overpredictions obtained with standard-valued parameters are rectifiedby resetting and _e to 1.1 and 1.6, respectively, giving, with c ₂ = 1.92, 1.3, and laminarization of the NABL's cappingtransport-dissipation region at a finite height.     

Potential refractivity as a similarity variable

The validity of a common radiometeorological application of Monin-Obukhov (M-O) similarity theory to potential refractivity (), which is a nonlinear combination of and q, is determined by whether the properly nondimensionalized gradient is a universal function of z/L. We develop expressions for the flux of (and its scaling parameter, *) in terms of temperature and moisture fluxes, and an M-O similarity expression for the vertical gradient. Results show that even if and q are accepted as exactly following M-O similarity expressions, when the surface layer is stable, does not obey such an expression. That is, when properly nondimensionalized, the vertical gradient of does not collapse to a single universal function of z/L. The assumption that behaves as a similarity variable is approximately correct for well-mixed surface layers under unstable and near-neutral conditions.The gradient of is an important factor in determining microwave propagation conditions. We demonstrate the error induced in a simple algorithm when is assumed to obey M-O similarity theory. An alternative methodology, consistent with the application of similarity theory to and q, is then developed without requiring that itself satisfy similarity theory.     

Radiation balance in a tropical city — Delhi (India)

The impact of urbanization is assessed by comparing values of the radiation parameters at an urban location with those of a rural site. Urban Delhi was divided according to land-use and the effects of urbanization was studied on incoming short-wave (K), albedo, incoming longwave (L, outgoing longwave (L), and net radiation (Q ^*), were individually studied at four representative sites (Rural, Commercial, Residential and Industrial). MaximumK was observed in the rural and commercial areas whereas highL was observed in the commercial and industrial locations. High depletion ofK of the order of 13% was observed for the industrial location in the winter season. An increase ofL in, the industrial location is of the same order as that of the commercial location, i.e. 20%. The residential location shows quite moderate (4.6%) depletion ofK in comparison with other sites.Nomenclature U Urban - R Rural - K Incoming Short-wave radiation - L Incoming Long-wave radiation - L Outgoing Long-wave radiation - Q ^* Net Radiation - Albedo - K ^* Net Short-wave radiation - L ^* Net Long-wave radiation     

On the turbulence structure in the stable boundary layer over the Greenland ice sheet

Turbulence measurements from a 30 m tower in the stably stratifiedboundary layer over the Greenland ice sheet are analyzed. The observationsinclude profile and eddy-correlation measurements at various levels. Atfirst, the analysis of the turbulence data from the lowest level (2 m aboveground) shows that the linear form of the non-dimensional wind profile(m) is in good agreement with the observations for z/L <0.4, whereL represents the Obukhov length. A linear regression yieldsm=1+5.8z/L. The non-dimensional temperature profile (h) at the2m level shows no tendency to increase with increasing stability. The datafrom the upper levels of the tower are analyzed in terms of both localscaling and surface-layer scaling. The m and the h values show atendency to level off at large stability (z/>0.4) where represents the local Obukhov length. Hence, the linear form of the functions is no longer appropriate under such conditions. The bestcorrespondence to the data can be achieved when using the expression ofBeljaars and Holtslag for m and h. The vertical profiles of theturbulent fluxes, the wind velocity variances and temperature variance arealso determined. The momentum flux profile and the profiles of wind speedvariances are in general agreement with other observations if a welldeveloped low-level wind maximum occurs, and the height of this maximum isused as a height scale.     

Hybrid modeling in meteorological applications: Anatomy of a $ 200 million freeze

Summary Unbeknownst to many fruit and vegetable producers a killer frost sneaked down the Florida peninsula during the night of January 18 to 19, 1997. According to news reports in left in its wake approximately $ 200 million in damage to crops and tress, much of which could have been avoided with available abatement technology. A lot of finger pointing followed between victims and agencies trying to fix the blame on an identifiable culprit. The recent privatization of some of the National Weather Service's former responsibilities added fuel to the fire. Without touching these politically hot potatoes the present paper gives a brief account of observational facts and then describes the results from an inexpensive, PC-based, operational forecasting system. That system has been described earlier (Reiter, 1991; Teixeira and Reiter, 1995; Reiter et al., 1998). The advantage of a hybrid system in which the user can interact with, and modify, the forecast on the fly is demonstrated.With 7 Figures and 9 Color PlatesThis paper, albeit dealing with a different season, is dedicated to the memory of Herbert Riehl who often used Florida as a base for his hurricane field research.     

Nine fallacies of natural disaster: The case of the Sahel

This article presents nine statements which are generally accepted as true. However, when they are applied to a particular situation, in this case the recent prolonged drought in the Sahelian zone in West Africa, they are as often untrue as they are true. For example, such generalizations as people learn from their mistakes or when the rains come, everything will return to normal or technology is the answer, when applied uncritically to a specific situation often prove to become part of the problem as well as a hindrance to the attainment of a solution to that problem.It is strongly suggested that these nine generalizations, here called fallacies, be carefully assessed when applied, thereby removing one more obstacle in dealing with environmental problems in general and natural hazards in particular.Published in Michael H. Glantz (ed.), The Politics of Natural Disasters: The Case of the Sahel Drought (NY: Praeger Publ., 1976) reprinted by permission.Michael H. Glantz is a scientist in the Advanced Study Program at the National Center for Atmospheric Research which is sponsored by the National Science Foundation.     

Numerical modeling of the nocturnal urban boundary layer

A numerical case study with a second-order turbulence closure model is proposed to study the role of urban canopy layer (UCL) for the formation of the nocturnal urban boundary layer (UBL). The turbulent diffusion coefficient was determined from an algebraic stress model. The concept of urban building surface area density is proposed to represent the UCL. Calculated results were also compared with field observation data. The height of the elevated inversion above an urban center was simulated and found to be approximately twice the average building height. The turbulent kinetic energy k, energy dissipation rate , and turbulence intensities u ² and w ² increase rapidly at the upwind edge of the urban area. The Reynolds stress uw displayed a nearly uniform profile inside the UBL, and the vertical sensible heat flux w had a negative value at the inversion base height. This indicates that the downward transport of sensible heat from the inversion base may play an important role in the formation of the nocturnal UBL.     

Re-analysis of the nuclear winter phenomenon

Summary An analysis of the report of the (U.S.) National Academy of Sciences (NAS) on atmospheric effects of a nuclear exchange leads to conclusions that differ from those of the NAS and of the earlier TTAPS and AMBIO studies. Any cooling of the earth's surface is likely to beshort-lived because of rapid removal of the smoke clouds originating from nuclear burst-initiated fires, andminor because of appreciable green-house effects due to several distinct physical causes. (One of these, neglected in prior analyses, is the infrared absorption from cirrus clouds produced directly by the nuclear bursts.) Taken together, these effects may even induce slight surface warming (nuclear summer) instead of cooling (nuclear winter). The consequences to atmospheric ozone are similarly ambiguous; depending on the detailed nuclear scenario, the net ozone content may increase-rather than decrease as argued by TTAPS. Experiments could settle some uncertainties.With 2 Figures     

Hybrid modeling in meteorological applications Part I: Concepts and approaches

Summary Hybrid modeling entails the combination of a numerical weather prediction model and a symbolic model. The latter uses symbolic objects, their characterizing attributes and sets of behavioral constrains which prescribe changes in the states of these objects as functions of time, space, and other imposed quantitative or heuristic conditions. Integration of these two modeling components for an on-line, real-time, operational system is feasible only if both the numerical and the symbolic model can be executed in a distributed mode, i.e. at a user's location rather than in a central weather service office. This condition entails the design of a numerical model that can run on relatively inexpensive desktop workstations or high-end PCs. Given such a capability, the output from the numerical model can be used to satisfy a number of behavioral constraints of objects (such as thunderstorm, blizzard, etc.), defined in the symbolic model. These constraints can be embedded invisibly as functions of time and pixel location on the computer screen, to be called upon as soon as the respective object is activated, e.g. by placing an icon on the screen.To make such a hybrid weather prediction model responsive to details in topography, it will have to be able to interface with a geographic information system (GIS) database. Since such databases can be very voluminous, management procedures for indexing and rapid information retrieval have to be instituted. The approach discussed here involves restructuring of given GIS data into B+ trees.The hybrid prediction model whose design is described in this paper, executes very quickly on a PC (e.g. a 33 megahertz Intel 80486 chip based machine). It allows assimilation of locally generated observational data to improve forecast quality, and can respond to queries of a highly specialized nature in support of tactical decisions within the time frame between nowcasting (3 hours) and 24 hours.With 6 Figures     

Parameterizing turbulent diffusion through the joint probability density

The convective mass flux parameterization often used in meteorological modeling expresses the vertical flux of a transported scalar as proportional to the product of the difference in mean values of the scalar in updrafts and downdrafts and their characteristic velocity. The proportionality factor is a constant to be specified. We show that this proportionality factor also appears in the relaxed eddy accumulation technique of Businger and Oncley. That associates the surface-layer flux of a scalar with the product of the standard deviation of vertical velocity and the mean concentration difference between updrafts and downdrafts.We show that this constant (b) is determined uniquely by the joint probability density (jpd) of vertical velocity and the scalar. Using large-eddy simulation, we generate this jpd for a conservative scalar diffusing through a convective boundary layer. It has quite different forms in top-down and bottom-up diffusion geometries. The bottom-up jpd is fairly well represented by a jointly Gaussian form and implies b ~ 0.6, in good agreement with the surface-layer value reported by Businger and Oncley. The top-down jpd is strikingly non-Gaussian and gives b ~ 0.47. Updrafts carry the bulk of the scalar flux - 70% in the bottom-up case, 60% in the top-down case.The National Center for Atmospheric Research is sponsored by the National Science Foundation.