Neogene Paleoseismic Events and the Shanwang Biota’s Burial in the Linqu Area, Shandong Province, China

Several paleoseismic events are recorded in the Neogene Linqu Group, exposed in the Linqu area, Shandong Province, China. The events were interpreted on the basis of fieldwork and laboratory analysis, which showed the presence of seismites with plastically deformed soft-sediment deformation structures in the Shanwang Formation, and of seismic volcanic rocks in the Yaoshan Formation which show brittle deformation. The earthquake-triggered soft-sediment deformations in the seismites include load structures, ball-and-pillow structures, flame structures, pillow-like beds, boudinage structures, slump folds, syn-depositional faults, veins of liquefied sand, and dikes of liquefied sandy lime-mud. The seismic activity is also reflected in what might be called ‘brittle seismites'; these originated when, under the influence of seismic vibrations, semi-consolidated conglomerate was shattered. Moreover, volcanic activity is related to intense earthquakes that affected basalts intercalated with sand layers; these successions are known as ‘seismic volcanic rocks', which are characterized by veins of liquefied sand intruding the basalts. All above traces of paleoseismic activity were left from one single time span of 4 Ma with active seismicity that took place 14–10 Ma. This time span is known as ‘the Linqu Neogene Paleoseismic Active Period', which is divided into four paleoseismic episodes, which were responses to tectonic extension and basin rifting in this area. It even includes the activity of the Yishu Fault Zone during the Miocene and the Neogene. The ratios of trace elements in the seismites, w(La)/w(Sc) and w(La)/w(Th) are higher than the average value of the upper crust, but w(Th)/w(Sc) is lower; this is geochemical evidence for the basin rifting that resulted in a high sedimentation rate. The intense and frequent paleo-earthquakes are held responsible for the rapid burial of the Shanwang Biota. Secondary earthquake-induced processes(e.g. slumping of a lake shore and the strongly increased lacustrine sedimentation rate) contributed to the rapid burial of the biota.     

Active tectonism in the central Alps: contrasting stress regimes north and south of the Rhone Valley

An integrated interpretation of seismicity, fault plane solutions and deep seismic reflection data suggests that the NE–SW to NW–SE trending Rhone–Simplon fault zone and the gently S-dipping basal Penninic thrust separate fundamentally different stress regimes in the western Swiss Alps. North of the Rhone-Simplon fault zone, strike-slip earthquakes on steep-dipping faults within the Helvetic nappes are a consequence of regional NW–SE compression and NE–SW extension. To the south, vertical maximum stress and N–S extension are responsible for normal mechanism earthquakes that occur entirely within the Penninic nappes above the basal Penninic thrust. Such normal faulting likely results from extension associated with southward movements (collapse) of the Penninic nappes and/or continued uplift and relative northward displacements of the underlying Alpine massifs. Geological mapping and fission-track dating suggest that the two distinct stress regimes have controlled tectonism in the western Swiss Alps since at least the Neogene.     

The role of small‐scale fold and fault development in seismogenic zones: example of the western Huércal‐Overa Basin (eastern Betic Cordillera,Spain)

The NW–SE shortening between the African and the Eurasian plates is accommodated in the eastern Betic Cordillera along a broad area that includes large N‐vergent folds and kilometric NE–SW sinistral faults with related seismicity. We have selected the best exposed small‐scale tectonic structures located in the western Huércal‐Overa Basin (Betic Cordillera) to discuss the seismotectonic implications of such structures usually developed in seismogenic zones. Subvertical ESE–WNW pure dextral faults and E–W to ENE–ESW dextral‐reverse faults and folds deform the Quaternary sediments. The La Molata structure is the most impressive example, including dextral ESE–WNW Neogene faults, active southward‐dipping reverse faults and associated ENE–WSW folds. A molar M1 assigned to Mimomys savini allows for precise dating of the folded sediments (0.95–0.83 Ma). Strain rates calculated across this structure give ～0.006 mm a^?1 horizontal shortening from the Middle Pleistocene up until now. The widespread active deformations on small‐scale structures contribute to elastic energy dissipation around the large seismogenic zones of the eastern Betics, decreasing the seismic hazard of major fault zones. Copyright © 2009 John Wiley & Sons, Ltd.     

Caractérisation géométrique et cinématique des structures liées aux phases compressives de l'Éocène au Quaternaire inférieur en Tunisie : exemple de la Tunisie nord-orientale

During Eocene to Early Quaternary period, three compressive tectonic phases are recognized in Northeast Tunisia: a NW–SE to north–south phase during the Late Eocene, a N120-to-N140 phase in the Late Miocene, and a NW–SE to north–south phase in the Plio-Early Quaternary. The first Eocene phase has built NE–SW folds and remobilised east–west-to-N120 and NE–SW faults with a reverse component. The second Miocene phase is characterized by east–west-to-N120 faults with a normal component and NE–SW folds. The third phase occurred during the Plio-Early Quaternary has edified NE–SW folds associated with east–west-to-N120 dextral reverse strike-slip faults and NE–SW faults with a reverse component. To cite this article: H. Mzali, H. Zouari, C. R. Geoscience 338 (2006).     

青藏高原东北缘祁连山地区古地震记录与区域构造意义

青藏高原东北缘的地质地貌特征与基本构造格架受阿尔金左行走滑断裂、东昆仑左行走滑断裂和海源左行走滑断裂控制,在青藏高原的碰撞造山过程中地震作用贯穿始终.2011至2012年,作者对青藏高原东北缘东起靖远(海原断裂东段)西至昌马盆地(阿尔金断裂东南)的软沉积物变形(震积岩)进行的系统调研表明,青藏高原东北缘祁连山地区从三叠纪至第四纪各时代(侏罗纪以外)的地层中,均发现丰富的古地震纪录(震积岩).代表性震积岩发现点和层位有:靖远宝积山上三叠统、靖远糜滩乡下白垩统、昌马盆地下白垩统以及赤金堡和酒泉磁窑口附近的第四系.主要的震积岩类型有:液化脉、负载、球-枕构造、液化卷曲、层间微断裂等.根据区域地质资料分析,这些震积岩均分布于区域性大断裂附近.本文简单讨论了主要震积岩发现点与其相邻的区域构造(地震)活动之间的关系,根据靖远附近上三叠统普遍发育震积岩,提出海原断裂带的初始活动时间很可能就在晚三叠世,与青藏高原东缘龙门山地区印支期的造山地震同时期.     

Fault pattern delineation and structural interpretation of the Gafsa trough (onshore central Tunisia) using gravity data

The purpose of this investigation was to identify subsurface lineaments in Gafsa trough (onshore central Tunisia) after gravity data analysis. The Bouguer and residual gravity maps show a gravity values decrease from west to east associated with subsidence variation and confirmed by a regional seismic reflection profile. The deep structural map of the study area is elaborated after the application of two methods: (1) the automatic lineament tracing after horizontal gravity gradient and (2) 3D Euler method. The dominant trends show approximately NW–SE, E–W, and NE–SW directions. Some of these trends are well correlated with the major faults systems. We can qualify the deep structuration model as a mosaic of quadratic blocks bounded by significant deep flower fault corridors. The elaborated structural map of the study area constitutes also a useful document for rationalizing the future petroleum exploration in the Gafsa trough.     

Relationships between thrusts and normal faults in curved belts: New insight in the inversion tectonics of the Central-Northern Apennines (Italy)

The relationships between thrusts and normal faults represent primary constraints in the reconstruction of the modes and timing of pre-, syn- and post-orogenic deformation events in fold-and-thrust belts. Such relationships are well exposed in curved orogenic belts where the thrusts are oblique to the trend of normal faults.We study the NNE–SSW-trending Olevano-Antrodoco-Sibillini oblique thrust and its crosscutting relationships with NW–SE-trending normal faults in order to constrain the Neogene–Quaternary deformation history of the Central-Northern Apennine (Italy). The analysis of structural and geological data allowed us to reconstruct the geometric and kinematic constraints of two inversion events: 1 – During the Pliocene, positive inversion reactivated the NNE–SSW-trending pre-existing Ancona-Anzio normal fault as the Olevano-Antrodoco-Sibillini oblique thrust ramp and caused the shortcut of NW–SE-oriented normal faults; 2 – During the Quaternary, negative inversion reactivated NW–SE-trending pre-thrusting normal faults.The growth of the NW–SE Quaternary normal faults causes seismicity and is responsible of the development of wide Quaternary intramontane basins. Their distribution and the related seismicity have been controlled and compartmentalized by NNE–SSW-trending oblique thrusts. Thus, the crosscutting relationships between thrusts and normal faults are crucial in seismic hazard assessment.     

Paleostress analysis of the brittle deformations on the northwestern margin of the Red Sea and the southern Gulf of Suez,Egypt

Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and S_Hmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The S_Hmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.     

Structural style and tectono-stratigraphic evolution of the Neogene–Quaternary Siderno Basin,southern Calabrian Arc,Italy

The Neogene–Quaternary Siderno Basin is located in the southern Calabrian Arc, along an E–W transect including the Ionian side and part of the Tyrrhenian margin. The orogenic belt was generated by ongoing northward subduction of Ionian oceanic lithosphere beginning in the Early Cretaceous. Since the Oligocene, the area has experienced complex tectonics, including NW–SE-oriented pull-apart basins. The forearc region contains >2000 m of Oligocene-to-Quaternary strata that cover pre-Tertiary rocks. The succession forms an E-dipping monocline, with tectonic growth structures increasing upward. Erosional truncations and thickness variations suggest a different evolution for the Siderno Basin, which in comparison with northern and southern parts of the Ionian accretionary wedge, evolved differently during the Serravallian–Tortonian stages. NW–SE and NE–SW fault systems are dominant, the first exhibiting strike–slip and normal kinematics in the Nicotera–Gioiosa and Molochio–Antonimina fault zones. These structures were active during infilling of the Neogene basin, and represent a complex transfer zone.

The NE–SW system shows two types of tectonic kinematics: (1) a compressive stage, with NW–SE-orientated shortening, responsible for inversion tectonics documented by east-verging folds, thrusts, and back-thrusts, and (2) emplacement of the variegated clay during the Langhian, which is related to back-thrust propagation. The strike–slip accommodated stress generated in the accretionary prism in response to subduction of Ionian lithosphere and progradation of the accretionary front of the Calabrian forearc.     

Advances and Overview of the Study on Paleo-earthquake Events: A Review of Seismites

The distribution and formation mechanisms of typical identified seismites are analyzed based on various factors from plate tectonic positions, types of sedimentary basins and properties of seismogenic faults to focal mechanisms. Especially, structural styles, reserved positions, activity times, formation mechanisms and dynamics of soft-sediment deformation structures triggered by seismic activity are systematically analyzed. According to the genetic types of seismites, we propose 5 categories, including liquefied deformation, thixotropic deformation, hydroplastic deformation, superimposed gravity driving deformation and brittle deformation. Further, based on the main genetic types, composition of sediments and deformation styles, we draw up 35 secondary classifications. To determine paleo-seismic sequences in different times, activities of seismogenic faults, high-resolution tectonic events in one main tectonic movement and paleo-tectonic settings, and to understand the inducing mechanisms of paleo-earthquakes and ecologic environment evolution, researching on seismites are of great significance. Combing multiple approaches to identify the paleoearthquake records, simulating experiments on various soft-sediment deformation structures triggered by different magnitudes of shocking, dating precisely on paleo-seismic events, impacting on paleogeography and biological environment and on energy and resources domain are the frontiers of paleoseismic research.     

Halocinèse précoce associée au rifting jurassique dans l'Atlas central de Tunisie (région de Majoura–El Hfay)

Seismic and sequence stratigraphy analyses, petroleum-well control and surface data studies of the Majoura–El Hfay region in the Central Atlas of Tunisia had led to identify and calibrate Jurassic seismic horizons. Seismic stratigraphic sections, seismic tectonics analyses, isochron and isopach mapping of Jurassic sequences show a differentiated structuring of platform and depocentre blocks limited by deep-seated NE–SW, north–south east–west and NW–SE faults intruded by Upper Triassic salt. The early salt migration seems to have started by the platform fracturing during the Lower Liassic rifting event. These movements are fossilized by thickness variations of Jurassic horizons, aggrading and retrograding onlap and toplap structures between subsiding rim-syncline gutters and high platform flanks intruded by salt pillows and domes. The salt migration is also attested by Middle and Upper Jurassic space depocentre migrations. Around the Majoura–El Hfay study blocks bounded by master faults, Triassic salt have pierced the Cretaceous and Tertiary sedimentary cover in a salt diapir extrusion and salt wall structures. To cite this article: D. Tanfous Amri et al., C. R. Geoscience 337 (2005).     

Neogene tectonic evolution of the Gulf of Hammamet area,Northeast Tunisia offshore

This paper discusses the Neogene tectonic evolution of the Tunisia offshore Gulf of Hammamet basin. Based on seismic and well data, this basin was created during the Miocene and is currently trending NE–SW. During the Neogene, the study area was affected by geodynamic interactions controlled simultaneously by convergence of the Eurasia and Africa plates and the opening of the Atlantic Ocean. These interactions generated compressive and extensional regimes which led to a variety of structures and basin inversions.The middle Miocene extensional regime created horst and graben structures (e.g. the Halk El Menzel graben). The two major compressive phases of the Tortonian and post Villafranchian age created different structures such as Ain Zaghouan and Fushia structures and the Jriba trough, and led to the reactivation of the old normal faults as reverse faults. During the Plio-Pleistocene and the Quaternary times, the Gulf of Hammamet was affected by an extensional regime related to the Siculo-Tunisian rift, which led to the development in the area of several sedimentary basins and new normal fault patterns.The Gulf of Hammamet shows several basins ranging in age from the Tortonian to the Quaternary, which display different structural and stratigraphic histories. Two main groups of sedimentary basins have been recognized. The first group has Tortonian–Messinian sedimentary fill, while the second group is largely dominated by Plio-Quaternary sediments. The shortening during the Tortonian and post Villafranchian times has led to the tectonic inversion of these basins. This shortening could be correlated to the Europe–Africa collision.Despite the large number of hydrocarbon discoveries, the Gulf of Hammamet remains under-explored, in particular at deeper levels. This study aims to guide future exploration and to highlight some new play concepts.     

The Tsagan earthquake of 1862 on Lake Baikal revisited: a study of secondary coseismic soft-sediment deformation

Coseismic soft-sediment deformation has been studied by structural and tectononophysical methods in the Selenga Delta area shaken by the devastating M ～ 7.5 Tsagan earthquake in 1862. Among the documented deformation structures (seismites), clastic dikes are the most reliable paleoseismic indicators. The dikes have their sizes and extent showing proximity to the primary coseismic rupture zone and are closely associated with faults of different hierarchic levels. The Tsagan event occurred under SW–NE extension as motion on a stepped system of normal faults dipping at 300°–350°, ∠45°–75°.The amount of vertical motion measured against a reference layer in a trench reached 2.83 m, and the maximum dip displacement measured in a single fracture was 0.5 m. The earthquake was generated by the Delta Fault that dips at 60° on average to the northwest.The distribution of quantitative parameters of brittle and brittle-plastic deformation has been analyzed along two profiles, and two new parameters were introduced: indices of mean intensity (I) of clastic dikes and microdikes; the new parameters were calculated by specially developed equations. Summation of significant peaks in all parameters (SUM_spp) allowed contouring the zone of most intense soft-sediment deformation near Dubinino Village.Deformation mostly propagated in the NE–SW and N–S directions. The location of the 1862 Tsagan earthquake at 52.35° N and 106.67° E was inferred from the SUM_spp value taking into account the dip of the causative fault plane and the average origin depth of earthquakes in the Baikal rift. The approach we used is applicable to locating preinstrumental events.The recurrence of large earthquakes in the area of Proval Bay (Lake Baikal) has been estimated to be 1120–1230 years proceeding from alternating deformed and undeformed sediments in the sections, their thicknesses and deposition rates according to radiocarbon dating. The seismic activity has been associated with the same fault which can generate M ≥ 7 events.     

Structural deformation and evolution of right-lateral strike-slip tectonics of the Liaohe western depression during the early Cenozoic

The Tan-Lu fault zone (TLFZ) traverses the Liaohe western depression (LHWD), affords an exceptional opportunity to reveal the structural deformation and evolution of a major strike-slip fault of the LHWD using three dimensional seismic data and well data. In this paper, based on structural interpretations of the 3-D seismic data of the LHWD, combined with depth slice and seismic coherency, a variety of structural features in relation to right-lateral strike-slip fault (the western branch of the Tan-Lu fault) have been revealed presence in the depression, such as thrust faults (Xinlongtai, Taian-Dawa, and Chenjia faults), structural wedges, positive flower structures, and en echelon normal faults. Fault cutoffs, growth strata and the Neogene unconformity developed in the LHWD verify that the activity of right-lateral strike-slip from the late Eocene to Neogene (ca. 43–23 Ma). The study indicates that the right-lateral strike-slip played an important role in controlling the structural deformation and evolution of the LHWD in the early Cenozoic. Moreover, the front structural wedge generated the gross morphology of the Xinlongtai anticline and developed the Lengdong faulted anticline during the late Eocene, and the back structural wedge refolded the Lengdong faulted anticline zone in the late Eocene to the early Oligocene. Wrench-related structures (the Chenjia thrust fault and the en echelon normal faults) were developed during the late Oligocene. Uniform subsidence in the Neogene to Quaternary. Furthermore, the driving force of the right-lateral strike-slip deformation was originated from N–S extension stress related to the opening of the Japan Sea and NE–SW compression, as the far-field effect of India–Eurasia convergence.     

福建漳州盆地活动断裂研究

本文从形态学和运动学的角度,确定并系统地研究了二十条主要活动断裂。北西向断裂以正-左行走滑型为主,北东向断裂以右行走滑-逆断层为主,两组断裂构成活动断裂网络。用 C¹⁴年龄数据计算得到了最近5990—1870年以来,各取样点地壳平均升降速率的变化范围是+3.53mm/a 至-0.65mm/a。用布仑法求得的九龙江活动断裂现代平均滑动速率是1.7mm/a。更新世至现代构造应力场的最大主压应力是以缓倾角、走向为 NW290°左右为特征的。350m 深处最大主压应力是700—760bar。两组断裂交汇形成的高渗透率带,对形成对流型中、低温热水型热田是十分有利的。此外,对该区的地震活动性亦进行了讨论。     

The role of E–W basement faults in the Mesozoic geodynamic evolution of the Gafsa and Chotts basins,south-central Tunisia

The Gafsa and Chotts intracratonic basins in south-central Tunisia are transitional zones between the Atlasic domain to the north and the Saharan platform to the south. The principal aim of this paper is to unravel the geodynamic evolution of these basins following an integrated approach including seismic, well log and gravity data. These data are used to highlight the tectonic control on the deposition of Jurassic and Lower Cretaceous series and to discuss the role of the main faults that controlled the basin architecture and Cretaceous–Tertiary inversion. The horizontal gravity gradient map of the study area highlights the pattern of discontinuities within the two basins and reveals the presence of deep E–W basement faults. Primary attention is given to the role played by the E–W faults system and that of the NW–SE Gafsa fault which was previously considered active since the Jurassic. Facies and thickness analyses based on new seismic interpretation and well data suggest that the E–W-oriented faults controlled the subsidence distribution especially during the Jurassic. The NW–SE faults seem to be key structures that controlled the basins paleogeography during Late Cretaceous–Cenozoic time. The upper Triassic evaporite bodies, which locally outline the main NW–SE Gafsa fault, are regarded as intrusive salt bodies rather than early diapiric extrusions as previously interpreted since they are rare and occurred only along main strike-slip faults. In addition, seismic lines show that Triassic rocks are deep and do not exhibit true diapiric features.     

Tectonics of the Northern Bresse region (France) during the Alpine cycle

Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.     

Structural Mapping of the Bentong‐Raub Suture Zone Using PALSAR Remote Sensing Data,Peninsular Malaysia: Implications for Sediment‐hosted/Orogenic Gold Mineral Systems Exploration

The Bentong‐Raub Suture Zone (BRSZ) of Peninsular Malaysia is one of the major structural zones in Sundaland, Southeast Asia. It forms the boundary between the Gondwana‐derived Sibumasu terrane in the west and Sukhothai Arc in the east. The BRSZ is genetically related to the sediment‐hosted/orogenic gold deposits associated with the major lineaments in the Central Gold Belt of Peninsular Malaysia. In this investigation, the Phased Array type L‐band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in Peninsular Malaysia and provide detailed characterization of lineaments and curvilinear structures in the BRSZ, as well as their implication for sediment‐hosted/orogenic gold exploration in tropical environments. Major structural lineaments such as the Bentong‐Raub Suture Zone (BRSZ) and Lebir Fault Zone, ductile deformation related to crustal shortening, brittle disjunctive structures (faults and fractures) and collisional mountain range (Main Range granites) were detected and mapped at regional scale using PALSAR ScanSAR data. The major geological structure directions of the BRSZ were N–S, NNE–SSW, NE–SW and NW–SE, which derived from directional filtering analysis to PALSAR fine and polarimetric data. The pervasive array of N–S faults in the Central Gold Belt and surrounding terrain is mainly linked to the N–S trending of the Suture Zone. N–S striking lineaments are often cut by younger NE–SW and NW–SE‐trending lineaments. Gold mineralized trend lineaments are associated with the intersection of N–S, NE–SW, NNW–SSE and ESE–WNW faults and curvilinear features in shearing and alteration zones. Compressional tectonic structures such as the NW–SE trending thrust, ENE–WSW oriented faults in mylonite and phyllite, recumbent folds and asymmetric anticlines in argillite are high potential zones for gold prospecting in the Central Gold Belt. Three generations of folding events in Peninsular Malaysia have been recognized from remote sensing structural interpretation. Consequently, PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detailed structural analysis of fault systems and deformation areas with high potential for sediment‐hosted/orogenic gold deposits and polymetallic vein‐type mineralization along margins of Precambrian blocks, especially for inaccessible regions in tropical environments.     

Structural evidence for superposition of transtension on transpression in the Zagros collision zone: Main Recent Fault,Piranshahr area,NW Iran

The Main Recent Fault of the Zagros Orogen is an active major dextral strike-slip fault along the Zagros collision zone, generated by oblique continent–continent collision of the Arabian plate with Iranian micro-continent. Two different fault styles are observed along the Piranshahr fault segment of the Main Recent Fault in NW Iran. The first style is a SW-dipping oblique reverse fault with dextral strike-slip displacement and the second style consists of cross-cutting NE-dipping, oblique normal fault dipping to the NE with the same dextral strike-slip displacement. A fault propagation anticline is generated SW of the oblique reverse fault. An active pull-apart basin has been produced to the NE of the Piranshahr oblique normal fault and is associated with other sub-parallel NE-dipping normal faults cutting the reverse oblique fault. Another cross-cutting set of NE–SW trending normal faults are also exist in the pull-apart area. We conclude that the NE verging major dextral oblique reverse fault initiated as a SW verging thrust system due to dextral transpression tectonic of the Zagros collision zone and later it has been overprinted by the NE-dipping oblique normal fault producing dextral strike-slip displacement reflecting progressive change of transpression into transtension in the collision zone. The active Piranshahr pull-apart basin has been generated due to a releasing damage zone along the NW segment of the Main Recent Fault in this area at an overlap of Piranshahr oblique normal fault segment of the Main Recent Fault and the Serow fault, the continuation of the Main Recent Fault to the N.     

The role of geophysical and seismological data in evaluating the subsurface structures and tectonic trends of Nile Delta, Egypt

In the present study, the Bouguer, aeromagnetic, and seismological data analysis for Nile Delta including the Greater Cairo region and its surroundings was used to examine and trace the tectonic framework for some deep-seated faults (mostly normal faults with a small strike–slip component) and their orientation, on which most earthquakes have occurred. The new tilt derivative (TDR) geophysical map and Euler deconvolution presented here can be used to trace the structural relationships and their depth investigations across the entire region. Generally, most of the Euler deconvolution results especially from the gravity map were well coincided with the location of contacts derived by TDR particularly NNW to NS, EW, and NE trended structures. The depths to the gravity or magnetic sources, and the locations of the contacts of density contrast were estimated. Results of the Euler deconvolution method suggested that, in the southeastern part of the area, the basement could be observed to be shallow and has become deeper beneath the northern part. Furthermore, the resulting structural map of this study is well correlated with previous geological and seismological data analyses. At least two sets of predominant faults are suspected, faults with a NNW strike (Clysmic trend) which are particularly felt in the southern portion of the Delta, and some of them give it the shape of a “graben like structure.” Another parallel set of faults, having NE–SW strike (Pelusium trend), was also obvious in the southern part between Cairo and Suez cities (at Abu Zabal area). The evaluated trending faults (NNW–SSE or NE–SW) are intersecting with predominant major WNW–ESE to E–W (Tethys trend) striking faults. These intersections may generate more additional seismic pulses and consequently increase the seismic activity for these structures. However, minor NW (Najd Fault System) is obvious in the TDR magnetic map, whereas less attendance NS (East African trend) structural trends are evident in the TDR gravity map. Moreover, it could be said that the southeastern portion of the Nile Delta (especially the eastern portion of Greater Cairo) is affected by highly tectonic fault systems. Finally, a new tectonic map was also evaluated from the resulting structural map, which helps to quantify different structural patterns (faults and/or contacts), and their relations with the regional tectonic trends are discussed.