Radiocarbon dates of elevated shorelines,Indonesia and Malaysia. Part 1

Four new radiocarbon dates of elevated strandlines in tectonically active areas of eastern Indonesia and East Malaysia indicate average rates of uplift that range between 4.5 and 9 mm annually during the past 24,000 yr. These values are at least three times higher than former estimates from eastern Indonesia. Another radiocarbon date from the south arm of Sulawesi—also tectonically mobile—indicates a rate of uplift of 1.4–2.5 mm per year which corresponds with earlier determinations. This particular case, however, suggests that the sample was probably located close to a north-south axis about which southern Sulawesi was tilted during the Quaternary.     

Coastal uplift in continental collision plate boundaries: data from the Last Interglacial marine terraces of the Gibraltar Strait area (south Spain)

The spatial–height analyses of deposits belonging to isotopic substages 5e and 5c indicate the occurrence of differential uplift in the Gibraltar Strait area. Maximum mean uplift rates do not reach values of 0.2 mm/year displaying a gentle deceleration from 0.15 to 0.10 mm/year for the last 128 ka. Maximum estimated rates are recorded in the central sector of the Gibraltar Strait. The combined analysis of the accumulated vertical movements before and after ISS 5c indicates that differential uplift is accommodated along NE–SW sinistral and NW–SE dextral (mostly inherited) strike-slip fault systems separating coastal segments of contrasting uplifting/subsiding behaviour. The occurrence of inversions in the relative vertical offsets along some of these faults arises when this combined analysis is performed. A model of `asymmetric' pure shear, defined by these two fault systems, generated in response to the roughly N–S convergence between the African and Eurasian plates, can explain the recorded uplift patterns. In this transpressive setting generated by the Africa–Eurasia continental collision the recent convergence (4 mm/year) is mostly released by shear processes and subsidiary E–W horizontal extension, whilst the recorded coastal uplift only represents a low percentage of the recent convergence rates.     

青藏高原东部雀儿山地区新近纪隆升速率探讨——来自雀儿山花岗岩体磷灰石裂变径迹证据

通过青藏高原东部川西地区雀儿山花岗岩体磷灰石裂变径迹分析,新获得了4个磷灰石裂变径迹年龄值,分别为4. 9±0. 3Ma、6. 2±0. 5 Ma、7. 2±0. 4 Ma和7. 3±0. 7 Ma。运用径迹年龄-地形高差法计算出雀儿山花岗岩体新近纪的隆升速率,为0. 15～2 mm/a,平均隆升速率为0. 78mm/a。隆升速率在每个阶段有所不同,但呈现出一种快速隆升→缓慢隆升的过程,为整个青藏高原东缘的隆升过程提供了约束条件。     

Relative sea-level trends during the early–middle Holocene along the eastern coast of mainland Scotland, UK

Previously published radiocarbon-dated horizons relating to early and middle Holocene relative sea-level change along the eastern coast of mainland Scotland are examined and trends determined. The data are modified to ensure comparability and are compared against the pattern of glacio-isostatic uplift in the area. Results show that the rate of relative sea-level rise during the Main Postglacial Transgression in the middle Holocene becomes greater towards the edge of the uplifted area, whilst the age of the Main Postglacial Shoreline becomes younger in the same direction. Linear and quadratic regression analyses disclose trends which indicate that at the 0 m HWMOST isobase of the Main Postglacial Shoreline the rate of relative sea level rise between c. 8400 and c . 7000 14 C years BP ( c . 9500 to c . 7900 cal. BP) was 5-11 mm/radiocarbon year or 6-11 mm/calibrated year, whilst at the same isobase the Main Postglacial Shoreline was reached between 5500 and 6100 14 C years BP (between 6300 and 7000 cal. BP). The relative sea-level changes identified are compatible with a rising sea surface level offshore, which may have involved three episodes, possibly related to regional and wider deglaciation.     

Holocene crustal movements and sea-level changes in Great Britain

Crustal downwarping has occurred throughout southern and south-eastern England and most of Wales for at least the last 4000 years, but the type of movement in some areas of southern and eastern England is more complicated than simple linear subsidence. Highest estimated rates of subsidence (since 4000 BP) are for the Thames Estuary and Norfolk (up to 2 mm/yr). Glacio-isostatic processes have resulted in uplift in northern England and mainland Scotland. The rates of uplift have decreased throughout the Holocene; estimates for the present range from zero in south Lancashire and the Tees Estuary to over 1 mm/yr (though less than 2 mm/yr) in central Scotland. Over 400 sea-level index points, from the databank of 904 cases collected for IGCP Project 200, are grouped into 15 main areas and used to investigate the nature of crustal movements in Great Britain since 8800 BP, but there are significant deficiencies in available data which constrain the analysis.     

晚新生代以来青藏高原东缘的剥蚀过程:来自裂变径迹的证据

本文以青藏高原东缘的三级地貌(川西高原、龙门山和四川盆地)单元为基础,利用裂变径迹定年数据分区块研究了该地区的晚新生代以来的剥蚀速率。研究结果表明,晚白垩世以来青藏高原东缘经历了一个由平缓到突然加速的剥蚀过程,其转折点为中新世。在整个时间段内的平均剥蚀速率,川西高原为0.26mm/yr,龙门山为0.72mm/yr,四川盆地为0.20mm/yr。龙门山的剥蚀速率大约是川西高原的2.8倍,间接反映边缘山脉的隆升并不等同于高原内部的隆升,边缘山脉的隆升可能是构造隆升和剥蚀隆升相叠加的结果。     

Late Pleistocene to Holocene record of changing uplift rates in southern Calabria and northeastern Sicily (southern Italy, Central Mediterranean Sea)

A combination of published and new radiometric dates on uplifted Holocene fossil beaches from northeastern Sicily and southern Calabria (southern Italy) is compared with the altitude of the inner margin of the Last Interglacial (LIg) (Late Pleistocene, 124 ka) and older marine terraces in order to gain a regional-scale outline of uplift rates and their temporal changes in a region which is one of the fastest uplifting sectors of the Central Mediterranean Sea. Late Holocene radiocarbon dates from Ioppolo (southern Calabria) and Ganzirri (northeast Sicily), two newly discovered sites are here presented for the first time. The Holocene uplift rates are highest at St. Alessio and Taormina in eastern Sicily (2.4 mm/y) and at Scilla in southwestern Calabria (2.1 mm/y), two sites located across the Messina Straits and which separate the island of Sicily from mainland Italy. Uplift rates decrease towards the south and north from this centre of uplift. Late Holocene uplift rates show an apparent increase of between 64 and 124% when compared with the longer-term uplift rates calculated from the LIg highstand terraces. Furthermore, we discovered that the locations of fastest Late Pleistocene and Late Holocene uplift rates spatially coincide. To what extent the Holocene increase in uplift rates results from incomplete elastic strain release along the major extensional faults which frame the seismotectonic of the area, or indicate a true change in regional tectonic processes, is not resolved. Nonetheless, the heterogeneity of uplift, with a well-defined centre that crosses the Messina Straits, and its persistence at different time-scales indicates a tight connection between wider regional processes and fault-related displacement in controlling crustal instability in this area.     

Contemporary vertical crustal deformation in Cascadia

Data from 29 tide gauges and 113 pairs of first and second order leveling lines are analyzed to determine the pattern of vertical deformation in the Pacific Northwest of the United States. The data span nearly 100 years and represent the interseismic elastic deformation related to the great earthquake cycle. Uplift rates calculated from leveling surveys are adjusted to a model surface in the tidal reference frame using a robust, weighted, linear, least square technique. Rapid uplift occurs in two distinct broad regions along the coast separated by a narrow zone of slow subsidence. Vertical deformation rates range from > 4 mm/year of uplift on southern Vancouver Island to > 2 mm/year of subsidence in northern coastal Oregon. The deformation pattern is consistent with the results of previous studies and subduction models.     

Groundwater recharge in natural dune systems and agricultural ecosystems in the Thar Desert region, Rajasthan, India

Water and nutrient availability for crop production are critical issues in (semi)arid regions. Unsaturated-zone Cl tracer data and nutrient (NO₃ and PO₄) concentrations were used to quantify recharge rates using the Cl mass balance approach and nutrient availability in the Thar Desert, Rajasthan, India. Soil cores were collected in dune/interdune settings in the arid Thar Desert (near Jaisalmer) and in rain-fed (nonirrigated) and irrigated cropland in the semiarid desert margin (near Jaipur). Recharge rates were also simulated using unsaturated zone modeling. Recharge rates in sparsely vegetated dune/interdune settings in the Jaisalmer study area are 2.7–5.6 mm/year (2–3% of precipitation, 165 mm/year). In contrast, recharge rates in rain-fed agriculture in the Jaipur study area are 61–94 mm/year (10–16% of precipitation, 600 mm/year). Minimum recharge rates under current freshwater irrigated sites are 50–120 mm/year (8–20% of precipitation). Nitrate concentrations are low at most sites. Similarity in recharge rates based on SO₄ with those based on Cl is attributed to a meteoric origin of SO₄ and generally conservative chemical behavior in these sandy soils. Modeling results increased confidence in tracer-based recharge estimates. Recharge rates under rain-fed agriculture indicate that irrigation of 20–40% of cultivated land with 300 mm/year should be sustainable.     

Distributed deformation around the eastern tip of the Kunlun fault

Whether active strain within the Indo-Asian collision zone is primarily localized along major strike-slip fault systems or is distributed throughout the intervening crust between faults remains uncertain. Despite refined estimates of slip rates along many of the major fault zones, relatively little is known about how displacement along these structures is accommodated at fault terminations. Here, we show that a systematic decrease in left-lateral slip rates along the eastern ~200 km of the Kunlun fault, from >10 mm/year to <1 mm/year, is coincident with high topography in the Anyemaqen Shan and with a broad zone of distributed shear and clockwise vorticity within the Tibetan Plateau. Geomorphic analysis of river longitudinal profiles, coupled with inventories of cosmogenic radionuclides in fluvial sediment, reveal correlated variations in fluvial relief and erosion rate across the Anyemaqen Shan that reflect ongoing differential rock uplift across the range. Our results imply that the termination of the Kunlun fault system is accommodated by a combination of distributed crustal thickening and by clockwise rotation of the eastern fault segments.     

Partitioning of convergence in Northwest Sub-Himalaya: estimation of late Quaternary uplift and convergence rates across the Kangra reentrant,North India

The Kangra reentrant constitutes a ~ 80-km-wide zone of fold-thrust belt made of Cenozoic strata of the foreland basin in NW Sub-Himalaya. Earlier workers estimated the total long-term shortening rate of 14 ± 2 mm/year by balanced cross-section between the Main Boundary Thrust and the Himalayan Frontal Thrust. Geologically estimated rate is nearly consistent with the GPS-derived slip rate of 14 ± 1 mm/year. There are active faults developed within 4–8 km depth of the Sub-Himalayan fold-thrust belt of the reentrant. Dating the strath surfaces of the abandoned fluvial terraces and fans above the thrust faults, the uplift (bedrock incision) rates are computed. The dips of thrust faults are measured in field and from available seismic (depth) profiles. From the acquired data, late Quaternary shortening rates on the Jawalamukhi Thrust (JT), the Soan Thrust (ST) and the Himalayan Frontal Thrust (HFT) are estimated. The shortening rates on the JT are 3.5–4.2 mm/year over a period 32–30 ka. The ST yields a shortening rate of 3.0 mm/year for 29 ka. The corresponding shortening and slip rates estimated on the HFT are 6.0 and 6.9 mm/year during a period 42 ka. On the back thrust of Janauri Anticline, the shortening and slip rates are 2.0 and 2.2 mm/year, respectively, for the same period. The results constrained the shortening to be distributed largely across a 50-km-wide zone between the JT and the HFT. The emergence of surface rupture of a great and mega earthquakes recorded on the reactivated HFT implies ≥100 km width of the rupture. The ruptures of large earthquakes, like the 1905 Kangra and 2005 Kashmir, remained restricted to the hinterland. The present study indicates that the high magnitude earthquakes can occur between the locking line and the active thrusts.     

Reconstruction of Late Pleistocene events in the periglacial area in the southern part of the East European Plain

An integrated study of the loess–soil sequence in the coastal exposure near the settlement of Beglitsa (Rostov oblast) allowed us, for the first time, to reconstruct the landscape-climatic changes that occurred in the eastern Azov region over the course of the Late Pleistocene. In the south of the periglacial zone, considerable differences between intensity of the loess accumulation in the Early and Late Valdai Cryochrons were revealed. In the Early Valdai Epoch, which corresponds roughly to the end of Marine Isotope Stage (MIS) 5 and MIS 4, loess accumulation occurred after completion of development of the Mezin pedocomplex and before the beginning of the Bryansk stage of soil development, i.e., over more than 20 000 years. In the much shorter Late Valdai Cryochron MIS 2 (10 000–12 000 years), loess accumulation reached 5 m. The data evaluation shows that the loess accumulation rates in the Early Valdai Epoch (~0.07 mm/year) and the Late Valdai Epoch (~0.5 mm/year) differ from each other by an order of magnitude.     

A seismotectonic study of the Southeastern Alaska Region

We compare relocations of recent (1973–2005) and historic (1919–1972) earthquakes to geologic and geophysical (gravity, aeromagnetic, and uplift) information to determine the relationship of seismicity to crustal deformation in southeastern Alaska. Our results suggest that along strike changes in the structure of the Pacific plate may control the location of the ends of rupture zones for large earthquakes along the offshore Queen Charlotte fault system in the southern portion of the study area. There is a marked increase in background seismicity in the northern portion of the study area where the Fairweather fault begins to bend toward the northwest and crustal uplift due to glacial unloading exceeds 20 mm/year. Focal mechanisms indicate that thrust and reverse mechanisms predominate in the region of maximum uplift, as might be expected by the decrease in ice sheet thickness. The diffuse nature of seismicity between the Fairweather and Denali faults in the northern study area suggests a complex interaction between plate/microplate interactions and glacial unloading, making it difficult to determine the optimal fault orientation for failure in moderate magnitude (5.5 to 6.5) earthquakes within this region.     

Recent terrestrial and satellite observations to model deformations at Colli Albani volcano (central Italy)

The Colli Albani volcanic complex (Rome, Italy) has been dominated by episodic eruptions commencing around 561?ka and ending with the most recent activity of the Albano maar phase (<70?ka). Earthquakes of moderate intensity, gas emissions and significant ground deformations are the recent evidences of a residual activity. Former geodetic data from leveling surveys, GPS stations and InSAR observations tracked ongoing significant uplift of the order of few mm/year near the Colli Albani western flank. Different uplift rates were detected by each technique in different time spans, suggesting also the possibility of sporadic recharge of the hydrothermal system. The renewed high precision leveling data from IGMI survey carried out in 1997/1999 and the last leveling survey carried out in 2006 show that the uplift along the route is currently significant at an average rate of ~3?mm/year. Radar interferograms from ALOS satellite show uplift rate of ~6?mm/year, southwest of the central sector of the leveling route. We have undertaken a joint inversion of the various geodetic data (vertical rates from leveling surveys, GPS site velocities and InSAR observations acquired by ALOS satellite) using a nonlinear inversion technique to estimate the parameters of a point-pressure source, possibly capable of explaining the ongoing deformation at Colli Albani volcano.     

Active deformation in the eastern Swiss Alps: post-glacial faults, seismicity and surface uplift

Post-glacial tectonic faults in the eastern Swiss Alps occur as single lineaments, clusters of faults or extensive fault zones consisting of several individual faults aligned along the same trend. The orientation of the faults reflects the underlying lithology and the pre-existing structures (joints, pervasive foliations) within these lithologies. Most post-glacially formed faults in the area around Chur, which undergoes active surface uplift of 1.6 mm/year, trend E–W and cut across Alpine and glacial features such as active screes and moraines. Additionally, there are NNW and ENE striking faults reactivating pervasive Alpine foliations and shear zones. Based on a comparison with the nodal planes of recent earthquakes, E–W striking faults are interpreted as active faults. Because of very short rupture lengths and mismatches of fault location with earthquake distribution, magnitude and abundance, the faults are considered to be secondary faults due to earthquake shaking, cumulative deformation in post- or interseismic periods or creep, and not primary earthquake-related faults. The maximum of recent surface uplift rates coincides with the youngest cooling of the rocks according to apatite fission-track data and is therefore a long-lived feature that extends well into pre-glacial times. Isostatic rebound owing to overthickened crust or to melting of glacial overburden cannot explain the observed surface uplift pattern. Rather, the faults, earthquakes and surface uplift patterns suggest that the Alps are deforming under active compression and that the Aar massif basement uplift is still active in response to ongoing collision.     

晚新生代岷江下蚀速率及其对青藏高原东缘山脉隆升机制和形成时限的定量约束

青藏高原东缘具有青藏高原地貌、龙门山高山地貌和山前冲积平原三个一级地貌单元 ,本文以岷江作为切入点 ,研究了该地区河流下蚀速率与山脉的隆升作用之间的相互关系。在建立岷江阶地序列的基础上 ,利用阶地高程和热释光年代学测年资料分别定量计算了岷江在川西高原、龙门山和成都盆地的下蚀速率 ,结果表明岷江各河段的下蚀速率明显不同 ,分别为 1.0 7～ 1.6 1mm / a、1.81m m/ a和 0 .5 9mm / a;在龙门山地区岷江的下蚀速率最高 ,约为川西高原地区的 1.5倍 ,约为成都平原地区的 3倍 ;而同一河段不同时期岷江的下蚀速率基本是连续的 ,具有很好的线性关系 ,可作为该河段整个河谷的下蚀速率。基于龙门山的表面隆升速率 (0 .3～ 0 .4 mm / a) ,在约束局部侵蚀基准面和气候变化对阶地形成的控制作用的基础上 ,本文建立了青藏高原东缘岷江下蚀速率与龙门山表面隆升速率之间的线性关系 ,结果表明河流下蚀速率约为山脉表面隆升速率的 5倍。根据龙门山表面在隆升速率和下切速率等方面均大于川西高原 ,并结合龙门山活动构造以走滑作用为主 ,笔者认为青藏高原东缘的边缘山脉以剥蚀隆升为主 ,兼有构造隆升作用。最后 ,根据岷江最大切割深度所需的时间 (3.4 8Ma)和成都盆地最古老的岷江冲积扇大邑砾岩的时间 (3.6 Ma     

Quantification of Quaternary vertical movements in the central Pannonian Basin: A review of chronologic data along the Danube River, Hungary

This study aims at a new quantification of neotectonic deformation of the central part of the Pannonian Basin. We use terrace levels and associated travertine as well as speleothem data along the Danube River to quantify its incision rate and thus, estimate the amount and rate of uplift at the axis of the Hungarian Mountain Range (HMR).

Several terrace levels and other geomorphic features along the Danube river are indicative for Quaternary uplift of the axial part of the emerging Hungarian Mountain Range. While the correlative terraces are at considerable height at the axis of the HMR, the terraces are gradually dipping below the basin fill of the adjacent lowlands. The correlation of the terrace segments is difficult because of their poor preservation, small size and variable height. The geomorphologic horizons indicate gradual incision of the river throughout the Quaternary during simultaneous deformation. However, no reliable chronological data have been available so far to quantify landscape-forming processes such as uplift, incision or erosion rates.

A reconsideration of existing published data for three consecutive segments of the Danube valley yields incision rates between 0.14 and 0.41 mm/year for the last 360 ky, with the highest value for the area of the Danube Bend. Accordingly, the middle to late Quaternary uplift rate of the axial zone of the HMR exceeded significantly that of the marginal areas. These rates represent an approximation as some quantitative data are still controversial. Our results suggest that formation of the Danube terraces is result of river incision triggered by the uplift of the HMR and modified by periodic climate changes.     

NEOTECTONICS ALONG THE EASTERN MARGIN OF THE TIBETAN PLATEAU: INFERENCES FROM BEDROCK RIVER INCISION PATTERNS

NEOTECTONICS ALONG THE EASTERN MARGIN OF THE TIBETAN PLATEAU: INFERENCES FROM BEDROCK RIVER INCISION PATTERNS1　ChenZ,BurchfielBC ,LiuY ,etal.GPSmeasurementsfromeasternTibetandtheirimplicationsforIndia/Eurasiaintracon tinentaldeformation[J] .JournalofGeophysicalResearch ,2 0 0 0 (inpress) . 2　KingRW ,ShenF ,BurchfielBC ,etal.GeodeticmeasurementofcrustalmotioninsouthwestChina.Geology,1997,2 5,179～ 182 . 3　KirbyE ,WhippleKX ,Burchfie…     

Fluid inclusion constraints on the uplift history of the metamorphosed massive sulphide deposits at Ducktown, Tennessee

Abstract Standard petrographic, microthermometric and Raman spectroscopic analyses of fluid inclusions from the metamorphosed massive sulphide deposits at Ducktown, Tennessee, indicate that fluids with a wide range of compositions in the C–O–H–N–S–salt system were involved in the syn- to post-metamorphic history of these deposits. Primary fluid inclusions from peak metamorphic clinopyroxene contain low-salinity, H₂O–CH₄ fluids and calcite, quartz and pyrrhotite daughter crystals. Many of these inclusions exhibit morphologies resembling those produced in laboratory experiments in which confining pressures significantly exceed the internal pressures of the inclusions. Secondary inclusions in metamorphic quartz from veins, pods, and host matrix record a complex uplift history involving a variety of fluids in the C–O–H–N–salt system. Early fluids were generated by local devolatilization reactions while later fluids were derived externally. Isochores calculated for secondary inclusions in addition to the chronology of trapping and morphological features of primary and secondary fluid inclusions suggest an uplift path which was concave toward the temperature axis over the P–T range 6–3 kbar and 550–225° C. Immiscible H₂O–CH₄–N₂–NaCl fluids were trapped under lithostatic to hydrostatic pressure conditions at 3–0.5 kbar and 215 ± 20° C. Entrapment occurred during Alleghanian thrusting, and the fluids may have been derived by tectonically driven expulsion of pore fluids and thermal maturation of organic material in lower-plate sedimentary rocks which are thought to underlie the deposits. Episodic fracturing and concomitant pressure decreases in upper-plate rocks, which host the ore bodies, would have allowed these fluids to move upward and become immiscible. Post-Alleghanian uplift appears to have been temperature-convex. Uplift rates of 0.10–0.05 mm year^?1 from middle Ordovician to middle Silurian – late Devonian, and 0.07–0.12 mm year^?1 from middle Silurian – late Devonian to late Permian are suggested by our uplift path and available geochronological data.     

Uplift and denudation of Mt Sanqingshan Geopark,Jiangxi Province,China

Mt Sanqingshan, a global Geopark and world natural heritage site located in Jiangxi Province, China, is famous for its eroded granite peaks. The uplift and denudation history of the area has been reconstructed using fission track methods for the first time. Apatite fission track ages (AFTAs) cluster into three groups at ca. 25 Ma, 45–55 Ma, and 70 Ma. These ages can be related to ancient multilevel denudation planes at about 900, 1200, and 1500 m above sea level, respectively. The apatite data also reveal four cooling stages for the Mt Sanqingshan region, from ca. 90 to 65–60 Ma, 65–60 to 45 Ma, 45 to 20–15 Ma, and 20–15 Ma to the present, with cooling rates of 1.96°C, 1.18°C, 0.37°C, and 3.78°C per million years, respectively, and an average cooling rate of 1.80°C per million years. Calculated uplift rates are 0.055, 0.034, 0.011, and 0.11 mm year^?1 in the four stages, yielding uplifts of 4140, 570, 290, and 1940 m, respectively. The uplift rate of the last stage was significantly faster than that of the other three preceding stages, reflecting rejuvenation of Mt Sanqingshan, as a result of new tectonism. The average uplift rate at Mt Sanqingshan is 0.053 mm year^?1, and the average denudation rate is 0.048 mm year^?1, resulting in 3550 m of uplift and 2540 m of denudation relative to eustatic sea level. The 1010 m difference is very close to the average elevation of about 1000 m at present. A comparison of uplift–denudation histories for Mt Sanqingshan and Mt Huangshan shows that fission track results can be useful for defining geomorphological development stages.