Lithosphere formation in the central Slave Craton (Canada): plume subcretion or lithosphere accretion?

Major-element compositions of minerals in peridotite xenoliths from the Lac de Gras kimberlites provide constraints on the mode of lithosphere formation beneath the central Slave Craton, Canada. Magnesia contents of reconstructed whole rocks correlate positively with NiO and negatively with CaO contents, consistent with variable partial melt extraction. Alumina and Cr₂O₃ contents are broadly positively correlated, suggestive of melt depletion in the absence of a Cr–Al phase. Garnet modes are high at a given Al₂O₃ content (a proxy for melt depletion), falling about a 7 GPa melt depletion model. These observations, combined with high olivine Mg# and major-element relationships of FeO-poor peridotites (<7.5 wt%) indicative of melt loss at pressures >3 GPa (residual FeO content being a sensitive indicator of melt extraction pressure), and similar high pressures of last equilibration (∼4.2 to 5.8 GPa), provide multiple lines of evidence that the mantle beneath the central Slave Craton has originated as a residue from high-pressure melting, possibly during plume subcretion. Apparent low melt depletion pressures for high-FeO peridotites (>7.5 wt%) could suggest formation in an oceanic setting, followed by subduction to their depth of entrainment. However, these rocks, which are characterised by low SiO₂ contents (<43 wt%), are more likely to be the result of post-melting FeO-addition, leading to spuriously low estimates of melt extraction pressures. They may have reacted with a silica-undersaturated melt that dissolved orthopyroxene, or experienced olivine injection by crystallising melts. A secular FeO-enrichment of parts of the deep mantle lithosphere is supported by lower average Mg# in xenolithic olivine (91.7) compared to olivine inclusions in diamond (92.6).     

Mineralogy of primary carbonate-bearing hypabyssal kimberlite, Lac de Gras, Slave Province, Northwest Territories, Canada

A suite of fresh, Late Cretaceous to Eocene hypabyssal kimberlites from the Lac de Gras field were studied in order to understand better carbonate, silicate and oxide paragenesis. The samples have excellent preservation of textures and primary mineralogy and are archetypal or Group 1 kimberlite. Five kimberlite localities are identified as calcite-bearing based on the presence of high Sr–Ba calcite as phenocrysts, microphenocrysts and in segregations. Three kimberlite localities are identified as dolomite-bearing based on the presence of mixed calcite–dolomite segregations containing oscillatory and banded textures of calcite–dolomite solid solution and dolomite (±magnesite). Sr–Ba calcite are characterized by high X_Ca (>0.95) and are enriched in Sr (4900–11,100 ppm) and Ba (3200–14,200 ppm). The calcite–dolomite and dolomite–magnesite solid solution compositions span the X_Ca range from 0.42 to 0.95, and typically have Sr and Ba contents in the range of 1000–4000 ppm. The carbonate, silicate and oxide mineral compositions suggest that the origin of the calcite-bearing versus dolomite-bearing kimberlites studied is related to subtle differences in parent magma composition, in particular, the CO₂/H₂O ratio. Formation of the carbonates reflects the latter part of a protracted magmatic crystallization sequence, in which Sr–Ba calcite precipitates from an evolved kimberlite melt. Subsequently, calcite–dolomite solid solution and dolomite is precipitated from localized, Mg-rich carbonate fluids at relatively high temperatures (higher than serpentine stability).     

The geology of kimberlite pipes of the Ekati property, Northwest Territories, Canada

This paper reviews key characteristics of kimberlites on the Ekati property, NWT, Canada. To date 150 kimberlites have been discovered on the property, five of which are mined for diamonds. The kimberlites intrude Archean basement of the central Slave craton. Numerous Proterozoic diabase dykes intrude the area. The Precambrian rocks are overlain by Quaternary glacial sediments. No Phanerozoic rocks are present. However, mudstone xenoliths and disaggregated sediment within the kimberlites indicate that late-Cretaceous and Tertiary cover (likely <200 m) was present at the time of emplacement. The Ekati kimberlites range in age from 45 to 75 Ma. They are mostly small pipe-like bodies (surface area mostly <3 ha but up to 20 ha) that typically extend to projected depths of 400–600 m below current surface. Pipe morphologies are strongly controlled by joints and faults. The kimberlites consist primarily of variably bedded volcaniclastic kimberlite (VK). This is dominated by juvenile constituents (olivine and lesser kimberlitic ash) and variable amounts of exotic sediment (primarily mud), with minor amounts of xenolithic wall-rock material (generally <5%). Kimberlite types include: mud-rich resedimented VK (mRVK); olivine-rich VK (oVK); sedimentary kimberlite; primary VK (PVK); tuffisitic kimberlite (TK) and magmatic kimberlite (MK). The presence and arrangement of these rock types varies widely. The majority of bodies are dominated by oVK and mRVK, but PVK is prominent in the lower portions of certain kimberlites. TK is rare. MK occurs primarily as precursor dykes but, in a few cases, forms pipe-filling intrusions. The internal geology of the kimberlites ranges from simple single-phase pipes (RVK or MK), to complex bodies with multiple, distinct units of VK. The latter include pipes infilled with steep, irregular VK blocks/wedges and at least one case in which the pipe is occupied by well-defined sub-horizontal VK phases, including a unique, 100-m-thick graded sequence. The whole-rock compositions of VK samples suggest significant loss of kimberlitic fines during eruption followed by variable dilution by surface sediment and concurrent incorporation of kimberlitic ash. Diamond distribution within the kimberlites reflects the amount and nature of mantle material sampled by individual kimberlite phases, but is modified considerably by eruption and depositional processes. The characteristics of the Ekati kimberlites are consistent with a two-stage emplacement process: (1) explosive eruption/s causing vent clearing followed by formation of a significant tephra rim/cone of highly fragmented, olivine-enriched juvenile material with varying amounts of kimberlitic ash and surface sediments (predominantly mud); and (2) infilling of the vent by direct deposition from the eruption column and/or resedimentation of crater rim materials. The presence of less fragmented, juvenile-rich PVK in the lower portions of certain pipes and the intrusion of large volumes of MK to shallow levels in some bodies suggest emplacement of relatively volatile-depleted, less explosive kimberlite in the later stages of pipe formation and/or filling. Explosive devolatilisation of CO₂-rich kimberlite magma is interpreted to have been the dominant eruption mechanism, but phreatomagmatism is thought to have played a role and, in certain cases, may have been dominant.     

Two anisotropic layers in the Slave craton

Four years of recording global earthquakes using a broadband seismometer located at the Ekati diamond mine revealed variations with earthquake azimuth in the arrival of SKS phases. These variations can be modeled assuming two distinct layers of anisotropy in the lithosphere. The lower layer probably lies in the mantle, and the anisotropy aligns with both North American plate motion and the strike of mantle structures identified by previous conductivity and geochemical analyses, at ˜N50°E. The upper layer is hypothesized to result from regional structures in the uppermost mantle and the crust; these trends are distinct from the mantle trends.     

Mineral inclusions and geochemical characteristics of microdiamonds from the DO27, A154, A21, A418, DO18, DD17 and Ranch Lake kimberlites at Lac de Gras, Slave Craton, Canada

A mineral inclusion, carbon isotope, nitrogen content, nitrogen aggregation state and morphological study of 576 microdiamonds from the DO27, A154, A21, A418, DO18, DD17 and Ranch Lake kimberlites at Lac de Gras, Slave Craton, was conducted. Mineral inclusion data show the diamonds are largely eclogitic (64%), followed by peridotitic (25%) and ultradeep (11%). The paragenetic abundances are similar to macrodiamonds from the DO27 kimberlite (Davies, R.M., Griffin, W.L., O'Reilly, S.Y., 1999. Diamonds from the deep: pipe DO27, Slave craton, Canada. In: Gurney, J.J., Gurney, J.L., Pascoe, M.D., Richardson, S.H. (Eds.), The J. B. Dawson Vol., Proc. 7th Internat. Kimberlite Conf., Red Roof Designs, Cape Town, pp. 148–155) but differ to diamonds from nearby kimberlites at Ekati (e.g., Lithos (2004); Tappert, R., Stachel, T., Harris, J.W., Brey, G.P., 2004. Mineral Inclusions in Diamonds from the Panda Kimberlite, S. P., Canada. 8th International Kimberlite Conference, extended abstracts) and Snap Lake to the south (Dokl. Earth Sci. 380 (7) (2001) 806), that are dominated by peridotitic stones.

Eclogitic diamonds with variable inclusion compositions and temperatures of formation (1040–1300 °C) crystallised at variable lithospheric depths sometimes in changing chemical environments. A large range to very ¹³C-depleted C-isotope compositions (δ¹³C=−35.8‰ to −2.2‰) and an NMORB bulk composition, calculated from trace elements in garnet and clinopyroxene inclusions, are consistent with an origin from subducted oceanic crust and sediments. Carbon isotopes in the peridotitic diamonds have mantle compositions (δ¹³C mode −4.0‰). Mineral inclusion compositions are largely harzburgitic. Variable temperatures of formation (garnet T_Ni=800–1300 °C) suggest the peridotitic diamonds originate from the shallow ultra-depleted and deeper less depleted layers of the central Slave lithosphere. Carbon isotopes (δ¹³C av.=−5.1‰) and mineral inclusions in the ultradeep diamonds suggest they formed in peridotitic mantle (670 km). The diamonds may have been entrained in a plume and subcreted to the base of the central Slave lithosphere.

Poorly aggregated nitrogen (IaA without platelets) in a large number of eclogitic (67%) and peridotitic (32%) diamonds, with similar nitrogen contents, indicates the diamonds were stored in the mantle at low temperatures (1060–<1100 °C) following crystallisation in the Archean. Type IaA diamonds have largely cubo-octahedral growth forms, and Type II and Type IaAB diamonds, with higher nitrogen aggregation states, mostly have octahedral morphologies. However, no correlation between these groups and their mineral inclusion compositions, C-isotopes, and N-contents rules out the possibility of unique source origins and suggests eclogitic and peridotitic diamonds experienced variable mantle thermal states. Variation in mineral inclusion chemistries in single diamonds, possible overgrowths of ¹³C-depleted eclogitic diamond on diamonds with peridotitic and ultradeep inclusions, and Type I ultradeep diamond with low N-aggregation is consistent with diamond growth over time in changing chemical environments.     

Multiple-mineral inclusions in diamonds from the Snap Lake/King Lake kimberlite dike, Slave craton, Canada: a trace-element perspective

Multiple inclusions of minerals in diamonds from the Snap Lake/King Lake kimberlites of the southeastern Slave craton in Canada have been analyzed for trace elements to elucidate the petrogenetic history of these inclusions, and of their host diamonds. As observed worldwide, the harzburgitic-garnet diamond inclusions (DIs) possess sinusoidal REE patterns that indicate an early depletion event, followed by metasomatism by LREE-enriched, HREE-depleted fluids. Furthermore, these fluids appear to contain appreciable concentrations of LILE and HFSE, based on the increasing abundances of these elements in the olivine inclusion that occurs at the outer portion of a diamond compared to that near the core. The compositions of these fluids are probably a mixture of hydrous-silicic melt, carbonatitic melt, and brine, similar to the compositions of micro-inclusions in diamonds reported by Navon et al. (2003). Comparison between the compositions of majoritic and normal harzburgitic garnets shows that the former are more depleted in terms of major/minor elements (higher Cr#) but significantly more enriched in the REE (up to 10×). This characteristic may indicate the higher susceptibility for metasomatic enrichment of previously more depleted garnets. Garnets of eclogitic paragenesis show strong LREE-depleted patterns, whereas the coexisting omphacite inclusion has relatively flat light- and middle-REE but depleted HREE. Whole-rock reconstruction from coexisting garnet and omphacite inclusions indicates that the protolith of these inclusions was probably the extrusive section of an oceanic crust, subducted beneath the Slave craton.     

Diamonds and their mineral inclusions from the A154 South pipe, Diavik Diamond Mine, Northwest territories, Canada

Mineral inclusions recovered from 100 diamonds from the A154 South kimberlite (Diavik Diamond Mines, Central Slave Craton, Canada) indicate largely peridotitic diamond sources (83%), with a minor (12%) eclogitic component. Inclusions of ferropericlase (4%) and diamond in diamond (1%) represent “undetermined” parageneses.

Compared to inclusions in diamonds from the Kaapvaal Craton, overall higher CaO contents (2.6 to 6.0 wt.%) of harzburgitic garnets and lower Mg-numbers (90.6 to 93.6) of olivines indicate diamond formation in a chemically less depleted environment. Peridotitic diamonds at A154 South formed in an exceptionally Zn-rich environment, with olivine inclusions containing more than twice the value (of  52 ppm) established for normal mantle olivine. Harzburgitic garnet inclusions generally have sinusoidal rare earth element (REE_N) patterns, enriched in LREE and depleted in HREE. A single analyzed lherzolitic garnet is re-enriched in middle to heavy REE resulting in a “normal” REE_N pattern. Two of the harzburgitic garnets have “transitional” REE_N patterns, broadly similar to that of the lherzolitic garnet. Eclogitic garnet inclusions have normal REE_N patterns similar to eclogitic garnets worldwide but at lower REE concentrations.

Carbon isotopic values (δ¹³C) range from − 10.5‰ to + 0.7‰, with 94% of diamonds falling between − 6.3‰ and − 4.0‰. Nitrogen concentrations range from below detection (< 10 ppm) to 3800 ppm and aggregation states cover the entire spectrum from poorly aggregated (Type IaA) to fully aggregated (Type IaB). Diamonds without evidence of previous plastic deformation (which may have accelerated nitrogen aggregation) typically have < 25% of their nitrogen in the fully aggregated B-centres. Assuming diamond formation beneath the Central Slave to have occurred in the Archean [Westerlund, K.J., Shirey, S.B., Richardson, S.H., Gurney, J.J., Harris, J.W., 2003b. Re–Os systematics of diamond inclusion sulfides from the Panda kimberlite, Slave craton. VIIIth International Kimberlite Conference, Victoria, Canada, Extended Abstracts, 5p.], such low aggregation states indicate mantle residence at fairly low temperatures (< 1100 °C). Geothermometry based on non-touching inclusion pairs, however, indicates diamond formation at temperatures around 1200 °C. To reconcile inclusion and nitrogen based temperature estimates, cooling by about 100–200 °C shortly after diamond formation is required.     

Seismic reflection imaging of thin, kimberlite dykes and sills: exploration and deposit characterization of the Snap Lake dyke, Canada

Seismic reflection techniques are, for the first time, used to image a thin, diamondiferous, kimberlite dyke from subcrop to depths greater than 1300 m. Exploration for vertical kimberlite pipes generally utilizes potential field techniques that often fail to reveal subhorizontal or shallow-dipping intrusions. In contrast, seismic reflection methods are well suited for imaging targets with this geometry. Therefore, in order to evaluate seismic reflection as a tool for subhorizontal kimberlite dyke/sill exploration and mine planning, a feasibility study and subsequent seismic survey were undertaken on the diamondiferous Snap Lake dyke (Northwest Territories, Canada). A substantial drilling program has mapped the dyke as a gently dipping sheet that averages 2–3 m in thickness. The detailed structural and composition data available at Snap Lake provides a unique opportunity to test reflection techniques on a well-sampled deposit. The feasibility study involved measuring P-velocities and densities of cores drilled from the kimberlite and host rocks. These data were used to model reflection amplitudes, evaluate resolution limitations, and determine the acquisition parameters for the reflection survey. Two 2-D lines were acquired that provide comparative datasets for different sources (explosive and vibroseis) and ground types (land and lake ice). In addition, the exploration-scale survey incorporated high fold (40–260 nominal) and long offsets (3260 m). The explosive-source profile recorded on land yielded a superb image of the dyke from depths of 60 m to more than 1300 m over a lateral distance of 5700 m. The seismic image correlates well with adjacent drill hole data and adds considerable detail to the topography of the kimberlite sheet determined by drilling. The vibroseis source also imaged the dyke, but only when sources and geophones were on land; the dyke was not imaged beneath the ice due to reverberation and attenuation effects. The frequency response and unusually strong reflection amplitudes from the dyke indicate the importance of tuning effects and multiples for this type of target and acquisition environment. Apparent correlations between reflection amplitudes and dyke structure (e.g., thickness, feathering, 3-D geometry) suggest that seismic reflection data may be valuable for guiding drilling programs. The results demonstrate that, in the appropriate situation, seismic methods have great potential for use in kimberlite exploration, subsurface mapping, and detailed imaging for mine development purposes.     

Features of coated diamonds from the Snap Lake/King Lake kimberlite dyke, Slave craton, Canada, as revealed by optical topography

Confocal photoluminescence (PL) and local absorption spectroscopy were used to study the types and spatial distribution of point defects in coated diamonds, the input of which is about 30% in the Snap Lake deposit, Canada. Nitrogen concentration is on the level of several hundreds of ppm in the core, with a nitrogen-poor layer in its outer part, whereas in the coat it is usually several times higher as a result of fast growth. Nitrogen defects in the core are strongly aggregated with N3, B and B′-forms dominating, whereas A-defects are typical of the coat. The rounded shape of the coated diamonds is a result of the combined effect of partial dissolution of the octahedral core and the “abnormal” growth of the coat, which produces a fibrous structure. Analysis of PL and PL excitation spectra showed that structureless yellow-green PL of the coat is likely to be due to nickel-nitrogen complexes with their fine structure broadened in the strain fields. The presence of irradiation/annealing products such as vacancies V⁰ and nitrogen-vacancy complexes NV⁻, N₂V₂ shows that the diamonds studied have undergone post-growth ionizing irradiation with further low-temperature annealing in natural conditions.     

Spinel lherzolite xenoliths from the Premier kimberlite (Kaapvaal craton, South Africa): Nature and evolution of the shallow upper mantle beneath the Bushveld complex

Coarse-grained, granular spinel lherzolites xenoliths from the Premier kimberlite show evidence of melt extraction and metasomatic enrichment, documenting a complex history for the shallow mantle beneath the Bushveld complex. Compositions of orthopyroxene, clinopyroxene and spinel indicate equilibration within the spinel–peridotite facies of the upper mantle, at depths from 80 to 100 km and temperatures from 720 to 850 °C. Bulk compositions have lower Mg-number [atomic 100 Mg/(Mg + Fe*)] than previously studied spinel peridotites from Premier, and have higher Mg/Si than low-temperature coarse grained garnet lherzolites, suggesting shallower melting conditions or metasomatic enrichment. Clinopyroxene in one sample is highly LREE-depleted indicating very minor modification of a residue of 20% melt extraction, whereas the calculated REE pattern for a melt in equilibrium with a mildly LREE-depleted sample is similar to MORB or late Archean basalt, possibly related to the Bushveld Complex. Bulk and mineral compositions suggest minimal refertilization by silicate melts in four out of six samples, but REE patterns indicate introduction of a LIL-enriched component that may be related to kimberlite.     

Phlogopite in mantle xenoliths and kimberlite from the Grib pipe,Arkhangelsk province,Russia:Evidence for multi-stage mantle metasomatism and origin of phlogopite in kimberlite

We present petrography and mineral chemistry for both phlogopite,from mantle-derived xenoliths(garnet peridotite,eclogite and clinopyroxene-phlogopite rocks)and for megacryst,macrocryst and groundmass flakes from the Grib kimberlite in the Arkhangelsk diamond province of Russia to provide new insights into multi-stage metasomatism in the subcratonic lithospheric mantle(SCLM)and the origin of phlogopite in kimberlite.Based on the analysed xenoliths,phlogopite is characterized by several generations.The first generation(Phil)occurs as coarse,discrete grains within garnet peridotite and eclogite xenoliths and as a rock-forming mineral within clinopyroxene-phlogopite xenoliths.The second phlogopite generation(Phl2)occurs as rims and outer zones that surround the Phil grains and as fine flakes within kimberlite-related veinlets filled with carbonate,serpentine,chlorite and spinel.In garnet peridotite xenoliths,phlogopite occurs as overgrowths surrounding garnet porphyroblasts,within which phlogopite is associated with Cr-spinel and minor carbonate.In eclogite xenoliths,phlogopite occasionally associates with carbonate bearing veinlet networks.Phlogopite,from the kimberlite,occurs as megacrysts,macrocrysts,microcrysts and fine flakes in the groundmass and matrix of kimberlitic pyroclasts.Most phlogopite grains within the kimberlite are characterised by signs of deformation and form partly fragmented grains,which indicates that they are the disintegrated fragments of previously larger grains.Phil,within the garnet peridotite and clinopyroxene-phlogopite xenoliths,is characterised by low Ti and Cr contents(TiO_21 wt.%,Cr_2 O_31 wt.% and Mg# = 100 × Mg/(Mg+ Fe)92)typical of primary peridotite phlogopite in mantle peridotite xenoliths from global kimberlite occurrences.They formed during SCLM metasomatism that led to a transformation from garnet peridotite to clinopyroxene-phlogopite rocks and the crystallisation of phlogopite and high-Cr clinopyroxene megacrysts before the generation of host-kimberlite magmas.One of the possible processes to generate low-Ti-Cr phlogopite is via the replacement of garnet during its interaction with a metasomatic agent enriched in K and H_2O.Rb-Sr isotopic data indicates that the metasomatic agent had a contribution of more radiogenic source than the host-kimberlite magma.Compared with peridotite xenoliths,eclogite xenoliths feature low-Ti phlogopites that are depleted in Cr_2O_3 despite a wider range of TiO_2 concentrations.The presence of phlogopite in eclogite xenoliths indicates that metasomatic processes affected peridotite as well as eclogite within the SCLM beneath the Grib kimberlite.Phl2 has high Ti and Cr concentrations(TiO_22 wt.%,Cr_2O_31 wt.% and Mg# = 100× Mg/(Mg + Fe)92)and compositionally overlaps with phlogopite from polymict brecc:ia xenoliths that occur in global kimberlite formations.These phlogopites are the product of kimberlitic magma and mantle rock interaction at mantle depths where Phl2 overgrew Phil grains or crystallized directly from stalled batches of kimberlitic magmas.Megacrysts,most macrocrysts and microcrysts are disintegrated phlogopite fragments from metasomatised peridotite and eclogite xenoliths.Fine phlogopite flakes within kimberlite groundmass represent mixing of high-Ti-Cr phlogopite antecrysts and high-Ti and low-Cr kimberlitic phlogopite with high Al and Ba contents that may have formed individual grains or overgrown antecrysts.Based on the results of this study,we propose a schematic model of SCLM metasomatism involving phlogopite crystallization,megacryst formation,and genesis of kimberlite magmas as recorded by the Grib pipe.     

Melt inclusions from the deep Slave lithosphere: implications for the origin and evolution of mantle-derived carbonatite and kimberlite

Melt inclusions in clinopyroxenes from lherzolitic xenoliths from the deep lithospheric mantle beneath the Slave Craton (Lac de Gras area, Canada) reveal multiple origins for carbonatitic melts. One type of inclusions consists of a series of silicate–carbonate–silicate concentric layers, interpreted to have unmixed under disequilibrium conditions during rapid ascent to the surface. Bulk major- and trace-element compositions are typical of Group 1 kimberlites and quantitative nuclear microprobe imaging of the globules reveals fractionation of related elements (e.g. F–Br, Nb–Ta) between the silicate and carbonate components. The globules probably formed by partial melting of carbonated peridotite, consistent with results of melting experiments and some models for the generation of kimberlite magmas. They provide evidence for a genetic relationship between some carbonate-rich magmas and ultramafic silicate magmas, and for the possibility of unmixing processes of these melts during their evolution.

The second inclusion type comprises carbonate-rich globules interpreted as samples of Mg-carbonatite melt that quenched on ascent to the surface. Bulk major- and trace-element compositions indicate that the melts were derived from a carbonate-rich source and oxygen, carbon, and strontium isotope data are consistent with the involvement of recycled crustal material and suggest that some mantle-derived carbonatites are unrelated to kimberlites.     

Oxidation state of the lithospheric mantle beneath Diavik diamond mine, central Slave craton, NWT, Canada

Oxygen fugacity (fO₂) conditions were determined for 29 peridotite xenoliths from the A154-North and A154-South kimberlites of the Diavik diamond mine using the newly developed flank method modified specifically for measuring Fe³⁺ in mantle-derived pyropic garnets. The results indicate that the garnet-bearing lithospheric mantle beneath the central Slave craton is vertically layered with respect to oxidation state. The shallow (<140 km), “ultra-depleted” layer is the most oxidized section of garnet-bearing subcratonic mantle thus far measured, up to one log unit more oxidizing relative to the FMQ buffer [Δlog fO₂ (FMQ) + 1]. The lower, more fertile layer has fO₂ conditions that extend down to Δlog fO₂ (FMQ) − 3.8, consistent with xenolith suites from other localities worldwide. Based on trace element concentrations in garnets, two distinct metasomatic events affected the mantle lithosphere at Diavik. An oxidized fluid imparted sinusoidal chondrite-normalized REE patterns on garnets throughout the entire depth range sampled. In contrast, a reducing melt metasomatic event affected only the lower portion of the lithospheric mantle. The fO₂ state of the Diavik mantle sample suggests that diamond formation occurred by reduction of carbonate by fluids arising from beneath the lithosphere.     

Granulite sulphides as tracers of lower crustal origin and evolution: An example from the Slave craton, Canada

We carried out a detailed study of sulphide minerals, a ubiquitous mineral group in lower crustal mafic to peraluminous granulite xenoliths from the Diavik kimberlites, to assess their use in constraining the origin and tectonothermal evolution of the deep crust, and to obtain additional data on the composition of lower crust beneath ancient continents. Sulphides are overwhelmingly pyrrhotite with minor Ni (0.7-3.9 at.%), Co (0.1-0.7 at.%), and Cu contents (0.4-3.9 at.%). Sulphide modes in mafic granulites range from 0.14 to 0.55 vol%, translating into bulk rock S contents from ∼600 to 2000 ppm, similar to S contents in other mafic igneous rocks and indicating preservation of primary igneous S contents. In mafic granulites, Re and Os abundances in sulphides range from 42.5 to 726 ppb and 3.2 to 180 ppb, respectively, whereas those in peraluminous granulites are distinctly lower (36.1-282 ppb and 1.8-7.2 ppb, respectively), suggestive of Re and Os loss to fractionating sulphides in the more evolved precursors of these rocks.The significant within-sample variability of ¹⁸⁷Os/¹⁸⁸Os and correlation with ¹⁸⁷Re/¹⁸⁸Os indicates the preservation of primary Re-Os isotope systematics and time-integrated decay of the measured ¹⁸⁷Re. Within the large uncertainties inherent in the nature of the samples and technique, sulphides in some granulites may record major tectonothermal events in the central Slave craton spanning several billion years of evolution. Multiple generations of sulphide can occur in a single sample. These data attest to the heterogeneous composition and complex history of the Slave craton lower crust.     

Geological setting and chemistry of kimberlite clan rocks in the Dharwar Craton, India

Diamond exploration in India over the past decade has led to the discovery of over 80 kimberlite-inferred and lamproite-related intrusions in three of the four major Archean cratons that dominate the subcontinent. These intrusions are Proterozoic (1.1 Ga), and are structurally controlled: locally (at the intersections of faults); regionally (in a 200 km wide, 1000 km long diamond corridor); and globally (in the reconstructed supercontinent of Rodinia). The geochemistry of 57 samples from 13 intrusions in the southern Dharwar Craton of Andhra Pradesh has been determined by XRF spectrometry. The bodies are iron-rich with mg#=50–70 and are neither archetypal kimberlites nor ideal lamproites; this may be the underlying reason that conventional exploration techniques have thus far failed to locate the primary sources of India's historically famous diamonds. The two major fields of kimberlite-clan rocks (KCR) in the Dharwar Craton, Wajrakur and Narayanpet, are separated by a NW–SE trending, transcontinental (Mumbai-Chennai) gravity lineament. About 80% of intrusions in Wajrakur are diamondiferous, but diamonds have not yet been reported in Narayanpet. The gravity anomaly may mark the boundary of an architectural modification in the keel of the sub-continental lithosphere, a suggestion that is supported by differences in kimberlite mineralogy, chemistry, mantle xenoliths, structural setting and crustal host rocks.     

Petrology and U–Pb geochronology of lower crustal xenoliths and the development of a craton, Slave Province, Canada

Lower crustal xenoliths recovered from Eocene to Cambrian kimberlites in the central and southern Slave craton are dominated by mafic granulites (garnet, clinopyroxene, plagioclase±orthopyroxene), with subordinate metatonalite and peraluminous felsic granulites. Geothermobarometry indicates metamorphic conditions of 650–800 °C at pressures of 0.9–1.1 GPa. The metamorphic conditions are consistent with temperatures expected for the lower crust of high-temperature low-pressure (HT-LP) metamorphic belts characteristic of Neoarchean metamorphism in the Slave craton. U–Pb geochronology of zircon, rutile and titanite demonstrate a complex history in the lower crust. Mesoarchean protoliths occur beneath the central Slave supporting models of an east-dipping boundary between Mesoarchean crust in the western and Neoarchean crust in the eastern Slave. At least, two episodes of igneous and metamorphic zircon growth occurred in the interval 2.64–2.58 Ga that correlate with the age of plutonism and metamorphism in the upper crust, indicating magmatic addition to the lower crust and metamorphic reworking during this period. In addition, discrete periods of younger zircon growth at ca. 2.56–2.55 and 2.51 Ga occurred 20–70 my after the cessation of ca. 2.60–2.58 Ga regional HT-LP metamorphism and granitic magmatism in the upper crust. This pattern of younger metamorphic events in the deep crust is characteristic of the Slave as well as other Archean cratons (e.g., Superior). The high temperature of the lower crust immediately following amalgamation of the craton, coupled with evidence for continued metamorphic zircon growth for >70 my after ‘stabilization’ of the upper crust, is difficult to reconcile with a thick (200 km), cool lithospheric mantle root beneath the craton prior to this event. We suggest that thick tectosphere developed synchronously or after these events, most likely by imbrication of mantle beneath the craton at or after ca. 2.6 Ga. The minimum age for establishing a cratonic like geotherm is given by lower crustal rutile ages of ca. 1.8 Ga in the southern Slave. Transient heating and possible magmatic additions to the lower crust continued through the Proterozoic, with possible additional growth of the tectosphere.     

Lithosphere development in the Slave craton: a linked crustal and mantle perspective

The late tectonic evolution of the Slave craton involves extensive magmatism, deformation, and high temperature-low pressure (HT-LP) metamorphism. We argue that the nature of these tectonic events is difficult to reconcile with early, pre-2.7 Ga development and preservation of a thick tectosphere, and suggest that crust–mantle coupling and stabilization occurred only late in the orogenic development of the craton. The extent and repetitiveness of the tectonic reworking documented within the Mesoarchean basement complex of the western Slave, together with the development of large-volume, extensional mafic magmatism at 2.7 Ga within the basement complex argue against preservation of a widespread, thick, cool Mesoarchean tectosphere beneath the western Slave craton prior to Neoarchean tectonism. Broad-scale geological and geophysical features of the Slave craton, including orientation of an early F1 fold belt, distribution of ca. 2.63–2.62 Ga plutonic rocks, and the distribution of geochemical, petrological and geophysical domains within the mantle lithosphere collectively highlight the importance of an NE–SW structural grain to the craton. These trends are oblique to the earlier, ca. 2.7 Ga north–south trending boundary between Mesoarchean and Neoarchean crustal domains, and are interpreted to represent a younger structural feature imposed during northwest or southeast-vergent tectonism at ca. 2.64–2.61 Ga. Extensive plutonism, in part mantle-derived, crustal melting and associated HT-LP metamorphism argue for widespread mantle heat input to the crust, a feature most consistent with thin (<100 km) lithosphere at that time. We propose that the mantle lithosphere developed by tectonic imbrication of one or more slabs subducted beneath the craton at the time of development of the D1 structural grain, producing the early 2.63–2.62 Ga arc-like plutonic rocks. Subsequent collision (external to the present craton boundaries) possibly accompanied by partial delamination of some of the underthrust lithosphere, produced widespread deformation (D2) and granite plutonism throughout the province at 2.6–2.58 Ga. An implication of this model is that diamond formation in the Slave should be Neoarchean in age.     

Diamonds and eclogites of the Jericho kimberlite (Northern Canada)

We studied diamonds and barren and diamondiferous eclogite xenoliths from the Jericho kimberlite (Northern Slave craton). The majority of the diamonds are non-resorbed octahedral crystals, with moderately aggregated N (IaB < 50%, N < 300 ppm) and δ¹³C = −5 to −41‰. The diamonds belong to “eclogitic” (90% of the studied samples), “websteritic” (7%) and “peridotitic” (3%) assemblages. The Jericho diamonds differ from the majority of “eclogitic” diamonds worldwide in magnesian compositions of associated minerals and extremely light C isotopic compositions (δ¹³C = −24 to −41‰). We propose that metasomatism triggered by H₂O fluids may have been involved in the diamond formation. Multiple episodes of the metasomatism and associated melt extraction of various ages are evident in Jericho eclogite xenoliths where primary garnet and clinopyroxene have been recrystallized to more magnesian minerals with higher contents of some incompatible trace elements and to hydrous secondary phases. The model is supported by the general similarity of mineral compositions in diamondiferous eclogites to those in diamond inclusions and to secondary magnesian garnet and clinopyroxene in recrystallized barren eclogites. The ultimate products of the metasomatism could be “websteritic” diamond assemblages sourced from magnesian eclogites. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A subduction wedge origin for Paleoarchean peridotitic diamonds and harzburgites from the Panda kimberlite, Slave craton: evidence from Re–Os isotope systematics

An extensive study of peridotitic sulfide inclusion bearing diamonds and their prospective harzburgitic host rocks from the 53 Ma Panda kimberlite pipe, Ekati Mine, NWT Canada, has been undertaken with the Re–Os system to establish their age and petrogenesis. Diamonds with peridotitic sulfide inclusions have poorly aggregated nitrogen (<30% N as B centers) at N contents of 200–800 ppm which differs from that of chromite and silicate bearing diamonds and indicates residence in the cooler portion of the Slave craton lithospheric mantle. For most of the sulfide inclusions, relatively low Re contents (average 0.457 ppm) and high Os contents (average 339 ppm) lead to extremely low ¹⁸⁷Re/¹⁸⁸Os, typically << 0.05. An age of 3.52 ± 0.17 Ga (MSWD = 0.46) and a precise initial ¹⁸⁷Os/¹⁸⁸Os of 0.1093 ± 0.0001 are given by a single regression of 11 inclusions from five diamonds that individually provide coincident internal isochrons. This initial Os isotopic composition is 6% enriched in ¹⁸⁷Os over 3.5 Ga chondritic or primitive mantle. Sulfide inclusions with less radiogenic initial Os isotopic compositions reflect isotopic heterogeneity in diamond forming fluids. The harzburgites have even lower initial ¹⁸⁷Os/¹⁸⁸Os than the sulfide inclusions, some approaching the isotopic composition of 3.5 Ga chondritic mantle. In several cases isotopically distinct sulfides occur in different growth zones of the same diamond. This supports a model where C–O–H–S fluids carrying a radiogenic Os signature were introduced into depleted harzburgite and produced diamonds containing sulfides conforming to the 3.5 Ga isochron. Reaction of this fluid with harzburgite led to diamonds with less radiogenic inclusions while elevating the Os isotope ratios of some harzburgites. Subduction is a viable way of introducing such fluids. This implies a role for subduction in creating early continental nuclei at 3.5 Ga and generating peridotitic diamonds.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.