Numerical Study on the Hydrodynamic Characteristics of Biofouled Full-Scale Net Cage

The effect of biofouling on the hydrodynamic characteristics of the net cage is of particular interest as biofouled nettings can significantly reduce flow of well-oxygenated water reaching the stocked fish. For computational efficiency, the porous-media fluid model is proposed to simulate flow through the biofouled plane net and full-scale net cage. The porous coefficients of the porous-media fluid model can be determined from the quadratic-function relationship between the hydrodynamic forces on a plane net and the flow velocity using the least squares method. In this study, drag forces on and flow fields around five plane nets with different levels of biofouling are calculated by use of the proposed model. The numerical results are compared with the experimental data of Swift et al. (2006) and the effectiveness of the numerical model is presented. On that basis, flow through full-scale net cages with the same level of biofouling as the tested plane nets are modeled. The flow fields inside and around biofouled net cages are analyzed and the drag force acting on a net cage is estimated by a control volume analysis method. According to the numerical results, empirical formulas of reduction in flow velocity and load on a net cage are derived as function of drag coefficient of the corresponding biofouled netting.     

A Model for the Calculation of Velocity Reduction Behind A Plane Fishing Net

1 .IntroductionOpen oceanaquacultureis becominga newfisheriesindustryasthe human demandfor seafoodin-creases .Consideringthe requirement of environmental protection,thelackof suitable shelteredsitesisforcingfishfarmers to move to more exposed offshore loc…     

Numerical simulation of the effects of fish behavior on flow dynamics around net cage

The computational fluid dynamics study is performed to analyze the impact of the cultured fish on the flow field through net cage and the deformation of net cage. The shear stress turbulent k-omega model is applied to simulate the flow field through the net cage, and the large deformation nonlinear structure model is adopted to conduct the structural analysis of the flexible net cage. To validate the net-fluid interaction model of the net cage in current, a series of physical model tests are conducted, which indicate that the numerical model can accurately simulate the flow field around the net cage and the deformation of the net cage. A fish model is used to simulate the effect of fish behavior on the flow pattern around the net cage and the deformation of the net cage. In addition, the flow fields around the net cage in current are investigated considering different fish group structures, fish swimming speeds, fish distributions and fish stocking densities. The results indicate that the circular movement of fish in the still water leads to a low pressure zone at the center of net cage, which causes a strong vertical flow along the center line of the net cage. The drag force on the net cage is significantly decreased with the increasing fish stocking density, but the most severe deformation of net cage occurred in the case of medium fish stocking density.     

渔网水动力试验研究及分析

根据流体力学实验结果 ,研究了雷诺数 ,网的密实度 ,网型以及流向等对网的阻力影响 ,同时讨论了侧向力问题 ,对同样网面积的平面网及圆型网的阻力进行了比较 ,结果圆型网阻力较小。     

平面无结节网衣水阻力系数的试验研究

通过物理模型试验,统计分析得到了无结节网衣的水阻力系数在不同状态下随雷诺数、倾角和布置状态的变化规律,并通过网衣沉子的组合试验验证了所得经验公式的正确性和适用性,为深水网箱等渔具的水动力计算提供了依据.     

水流作用下渔网养殖空间变化的计算方法

渔网的动力分析是养殖网箱设计和优化的基础。通过把一系列杆相互铰接在一起,建立网的模型,模拟网在来流作用下的变形。作用在杆上的水动力可以通过Morison公式来计算,采用有限单元的离散方法,并利用网目合并的方法来减少总的自由度数目。模型的计算结果同试验成果做了对比,计算与试验在柔性网的变形方面,结果吻合良好。     

Numerical simulation of the influences of sinker weight on the deformation and load of net of gravity sea cage in uniform flow

1IntroductionThe fish farming and aquaculture industry areexpanding and the demand for suitable locations forfish farms is increasing.In the future,more of thefish farms will be located offshore,as the number ofsuitable nearshore locations is limited.Futu…     

Dynamic Analysis for the Global Performance of An SPM-Feeder-Cage System Under Waves and Currents

In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.     

Finite element modeling of net panels using a consistent net element

A consistent finite element is proposed to model the hydrodynamic response of net panels to environmental loading. This equivalent net element is constructed to reproduce the drag, buoyancy, inertial and elastic forces exerted on the netting by current and waves. To evaluate the accuracy of the proposed finite element modeling, numerical predictions have been compared with the experimental observations and (simplified) analytical results of other authors. This new modeling technique has been applied to evaluate the performance of a tension leg fish cage in the open ocean environment.     

Flow through nets and trawls of low porosity

In trawls intended for harvesting marine zooplankton the mesh size and twine thickness may be as small as O(10⁻⁴ m), the porosity less than 0.5 and the appropriate Reynolds number O(10⁰−10²). The flow locally through the meshes varies strongly with the Reynolds number in this range, and the entire flow field, filtered volume and drag of such nets therefore depend strongly on the net parameters and towing velocity.This paper presents a simplified model for the flow through and forces on inclined permeable screens based on pressure drop considerations. For conical nets the model provides simple expressions for the filtration efficiency and drag as functions of twine diameter, mesh opening, porosity, taper angle and flow (towing) velocity. Comparisons with test tank measurements of typical plankton nets show good agreement.     

Numerical simulation of a partially buried pipeline in a permeable seabed subject to combined oscillatory flow and steady current

Hydrodynamic forces exerting on a pipeline partially buried in a permeable seabed subjected to combined oscillatory flow and steady current are investigated numerically. Two-dimensional Reynolds-Averaged Navier-Stokes equations with a k−ω turbulent model closure are solved to simulate the flow around the pipeline. The Laplace equation is solved to calculate the pore pressure below the seabed with the simulated seabed hydrodynamic pressure as boundary conditions. The numerical model is validated against the experimental data of a fully exposed pipeline resting on a plane boundary under various flow conditions. Then the flow with different embedment depths, steady current ratios and KC numbers is simulated. The amplitude of seepage velocity is much smaller than the amplitude of free stream velocity as expected. The normalized Morison inertia, drag and lift coefficients based on the corresponding force coefficients of a fully exposed pipeline are investigated. The normalized Morison force coefficients reduce almost linearly with the increase of embedment depth and that the KC only has minor effect on the normalized Morison coefficients. It is also found that the permeable seabed condition causes a slight increase on the inline force and has a little effect on the lift force, compared with corresponding conditions in an impermeable bed.     

Hydrodynamic characteristics of floating toroidal bodies

The paper deals with the linearized exciting wave forces and hydrodynamic coefficients of a toroidal body floating in water of finite depth. For the solution of the diffraction and the radiation problems the flow field around the body is subdivided into ring-shaped fluid regions, in each of which axisymmetric eigenfunction expansions for the velocity potential is made. By implementing Galerkin's method the various potential solutions are matched and numerical results concerning the exciting wave forces and the hydrodynamic coefficients in all modes of motion are obtained.     

基于桁架模型和多孔介质模型的柔性网衣和周围流场单向耦合方法研究

柔性网衣作为渔业养殖的重要组成部分,其水动力的计算分析对网箱的安全使用至关重要。基于桁架模型和多孔介质模型对柔性网衣和流场单向耦合计算的数值模拟方法进行了研究。通过code_aster软件基于桁架模型计算出网衣变形后节点坐标和网衣受力,然后将节点坐标导入OpenFOAM识别出网衣变形后的多孔介质区域,并基于多孔介质模型模拟水流作用下网衣周围的流场和计算网衣的受力。为了验证模型的正确性,将不同工况对圆形网衣的数值模拟结果与物理试验数据进行比较,包括code_aster中计算的网衣变形形状、OpenFOAM模拟的网衣周围流场以及在code_aster和OpenFOAM中计算的网衣受力。计算结果表明,圆形网衣在单纯来流下变形明显,与试验结果保持一致,证明了网衣变形和水动力单向耦合方法的准确性。     

新型网箱浮架系统水动力分析及系泊方式研究

设计了一种新型网箱浮架系统,利用SESAM对其进行了频域水动力分析以及考虑不规则波浪、风、流载荷和系泊共同作用的时域耦合分析,并与传统双浮管网箱浮架系统进行了分析对比,得到方形网箱与圆形网箱的水动力特性的差异以及各自的优缺点,对实际中网箱的开发设计有一定的借鉴意义;通过计算,证明新型网箱浮架系统在工作海况能正常工作,在极端海况下也能满足安全性的要求;最后对4种常见系泊方式进行了时域耦合分析,得到了四种系泊方式的系泊特性,对实际工程中系泊方式的选择有一定的参考意义。     

A numerical study on dynamic properties of the gravity cage in combined wave-current flow

Recent work in the area of open-ocean aquaculture-system dynamics has focused either on the response of fish cages in waves or the steady drag response from ocean currents, not on them combined. In reality, however, the forces bearing on these open-ocean structures are a nonlinear, multidirectional combination of both waves and current profiles. In this paper, a numerical model has been developed to simulate the dynamic response of the gravity cage to waves combined with currents. When current flows are combined with regular waves, gravity-cage motion response (including heave, surge, and pitch) and mooring-line forces have been calculated. To examine the validity of simulated results, a series of physical model tests have been carried out. The results of our numerical simulation are all in close agreement with the experimental data.     

Hydrodynamic coefficients for a thick-walled bottomless cylindrical body floating in water of finite depth

The paper deals with the linearized hydrodynamic forces acting on a thick-walled, bottomless cylindrical body having vertical symmetry axis and oscillating in water of finite depth. For the solution of the radiation problem, the flow field around the structure is subdivided into ring-shaped fluid regions, in each of which an axisymmetric eigenfunction expansion for the velocity potential is made. By implementing Galerkin's method the various potential solutions are then matched and numerical results concerning the hydrodynamic coefficients for heave, surge and pitch motions, as well as the coupling terms between the last two modes are obtained.     

Computation of the inertia-dominated forces on horizontal circular cylinders placed in oblique waves and near to a plane bed

Wave-force coefficients of horizontal circular cylinders inclined with respect to the incoming waves, are studied numerically under conditions when the effects of flow separation are insignificant. The mathematical model is set in terms of a boundary-value problem for the velocity potential of the wave, which is formulated under the assumption of the linear diffraction theory, and solved numerically by the boundary element method. The numerical calculations are performed in the vertical plane, assuming uniform water depths in the direction along the axis of the cylinder. A first-order correction to the pressures is introduced to take account of the asymmetry of the velocity field around the cylinder when it is close to the plane bed. The correction procedure is found to be highly effective in computing the transverse forces for small gap ratios. The numerical results show that irrespective of the values of the gap ratio, the in-line forces are always sensitive to the wave directionality. The transverse forces, however, show sensitivity only for the smaller gap ratios. It is also shown that by accounting for the wave directionality effects in the wave kinematics only, the forces could be estimated to a certain extent by using the hydrodynamic force coefficients of inertia and lift corresponding to the normal waves.     

Numerical Analysis on the Effects of Submerged Depth of the Grid and Direction of Incident Wave on Gravity Cage

In this paper,the numerical model of the net cage with the grid mooring system in waves is set up by the lumped mass method and rigid kinematics theory,and then the motion equations of floating system,net system,mooring system,and floaters are solved by the Runge-Kutta fifth-order method.For the verification of the numerical model,a series of physical model tests have been carried out.According to the comparisons between the simulated and experimental results,it can be found that the simulated and experimental results agree well in each condition.Then,the effects of submerged depth of grid and direction of incident wave propagation on hydrodynamic behaviors of the net cage are analyzed.According to the simulated results,it can be found that with the increase of submerged depth of grid,the forces acting on mooring lines and bridle lines increase,while the forces on grid lines decrease;the horizontal motion amplitudes of floating collar decrease obviously,while the vertical motion amplitudes of floating collar change little.When the direction of incident wave propagation changes,forces on mooting lines and motion of net cage also change accordingly.When the propagation direction of incident wave changes from 0° to 45°,forces on the main ropes and bridle ropes increase,while the forces on the grid ropes decrease.With the increasing propagation direction of incident wave,the horizontal amplitude of the forces collar decreases,while the vertical amplitude of the floating collar has little variation.     

聚焦波作用下平面网衣结构的水动力特性研究

由于沿海区域的限制以及愈加严重的环境污染,渔业养殖正从近海走向深远海。深远海海域的海况更加恶劣,给养殖装备的设计与性能评估带来新的挑战。为解决该问题,对极端波浪与养殖装备网衣结构的相互作用开展研究。基于waves2Foam建立数值波浪水池,极端波浪模拟采用基于NewWave理论的聚焦波模型,网衣结构模拟采用多孔介质模型,并通过与Morison模型计算的网衣受力等效分析,获得多孔介质模拟网衣结构阻力系数的直接估计方法。然后将多孔介质模型嵌入waves2Foam中,开展聚焦波与网衣结构相互作用的数值模拟,同时开展水槽试验,验证数值模拟的准确性。基于数值模拟结果,系统地分析了不同网衣密实度及不同波浪参数下网衣结构的升阻力特性以及网衣结构对波浪场的扰动规律。研究表明：聚焦波波峰幅值和网衣密实度对网衣结构的升阻力影响较大,且升力峰值出现在阻力为0的时刻;网衣结构对聚焦波的时空演化特性有影响,改变了聚焦波波形。     

Euler-Euler two-phase flow simulation of tunnel erosion beneath marine pipelines

In this study an Euler-Euler two-phase model was developed to investigate the tunnel erosion beneath a submarine pipeline exposed to unidirectional flow. Both of the fluid and sediment phases were described via the Navier-Stokes equations, i.e. the model was implemented using time-averaged continuity and momentum equations for the fluid and sediment phases and a modified k−ε turbulence closure for the fluid phase. The fluid and sediment phases were coupled by considering the drag and lift interaction forces. The model was employed to simulate the tunnel erosion around the pipeline laid on an erodible bed. Comparison between the numerical result and experimental measurement confirms that the numerical model successfully predicts the bed profile and velocity field during the tunnel erosion. It is evident that the sediments are transported as the sheet-flow mode in the tunnel erosion stage. Also the transport rate under the pipe increases rapidly at the early stage and then reduces gradually at the end of the tunnel erosion beneath pipelines.