首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Subsurface structural trends and tectonics affecting the offshore Nile Delta area, Egypt, have been studied through the interpretations of gravity and magnetic data. Reduced to the pole, regional–residual separation, Tilt derivative and Euler deconvolution techniques are applied for the processing and interpretations of the magnetic and gravity data. The average depth of the sedimentary cover, estimated from the two-dimensional power spectrum technique ranges between 8 km and 13 km. The interpretation of the gravity and magnetic data indicates that the study area is affected by many subsurface structural trends. The NW–SE is the major trend related to El-Temsah and Misfaq-Bardwil trend. The NE–SW direction is the second dominant trend, related to the Rosetta trend. Other trends defined through the interpretation of gravity and magnetic data include: the N–S direction, related to the Baltim fault trend, the E–W direction, related to the Neogene hinge line and the NNE–SSW related to the Gulf of Aqaba. Accessory trends include the ENE–WSW, WNW–ESE and finally the NNW–SSW.  相似文献   

2.
南京湖山地区大石碑断层位于大石碑向斜北西翼,在北东方向人工开采的剖面上表现为正断层性质。通过对大石碑 断层及其附近断层和节理的构造要素测量分析、构造应力场求解等研究,文章认为该断层以右行平移断层为主,兼有正断 层的性质。印支期该区在北西-南东方向挤压构造应力场作用下,形成北东方向的褶皱(宁镇山脉)、北西方向的右行平移 断层和北北西方向左行平移断层,其中北西方向的右行平移断层在北东方向的剖面上表现出正断层的假象,是断层效应的 一个典型教学实例。  相似文献   

3.
The purpose of this investigation was to identify subsurface lineaments in Gafsa trough (onshore central Tunisia) after gravity data analysis. The Bouguer and residual gravity maps show a gravity values decrease from west to east associated with subsidence variation and confirmed by a regional seismic reflection profile. The deep structural map of the study area is elaborated after the application of two methods: (1) the automatic lineament tracing after horizontal gravity gradient and (2) 3D Euler method. The dominant trends show approximately NW–SE, E–W, and NE–SW directions. Some of these trends are well correlated with the major faults systems. We can qualify the deep structuration model as a mosaic of quadratic blocks bounded by significant deep flower fault corridors. The elaborated structural map of the study area constitutes also a useful document for rationalizing the future petroleum exploration in the Gafsa trough.  相似文献   

4.
A 2.5D gravity and magnetic investigation was conducted along five transects across the Potiguar Basin in the Borborema Province, NE Brazil. The objective of the study is to model the internal architecture of this intracontinental rift basin, which represents the interaction between the heterogeneous Precambrian basement and the Neocomian extensional tectonics, which led to the South Atlantic opening.Joint modeling of the gravity and magnetic data was constrained by Euler deconvolution results, seismic data, well logs and geologic mapping. This integrated approach allowed to determine the rift architecture that is inserted in a complex tectonic and structural framework. Results from joint modeling show that a series of asymmetric half-grabens is oriented in the NE–SW direction and controlled by a system of normal faults with throw greater than 5.5 km. High-density and low-magnetized material constitutes the footwall and intrarift horsts. These supracrustal heterogeneities in association with preexisting shear zones probably guided the Mesozoic rifting process in NE Brazil. Their composition seems to be related to metamorphic rocks of the Proterozoic basement, as suggested by gravity and magnetic anomalies and the geology of the exposed basement. Our interpretation is supported by geophysical studies carried out in the Benue Trough, the counterpart of the Potiguar Basin in West Africa.  相似文献   

5.
In the Barramiya area, the majority of gold deposits are generally related with the quartz veins that associated with shear zones cutting the crystalline basement rocks. The quartz vein system is controlled by shear zone and general faults. The present study is to delineate the general faults, shear zones, geological limits, and basement rock relief, using airborne magnetic and gravity data analysis at the Barramiya gold mine and surrounding area, Eastern Desert of Egypt. To achieve our goal, we have applied on magnetic and gravity data the following techniques: reduction to pole (RTP), analytical signal, tilt derivative, total horizontal derivative, 3D Euler deconvolution, downward continuation, and source parameter imagining power spectrum techniques. The analytical signal used to map the types of rock boundaries. Tilt derivative and total horizontal derivative filters helped to delineate fractures and the contact zones of the formations that host the main Barramiya shear zone. 3D Euler deconvolution techniques helped to delineate the fault trends which represented at the following direction: NNE–SSW and NNW–SSE. The average depths of both regional and residual causes have been estimated by applying downward continuation, source parameter imagining, and power spectrum techniques. According to the results of the present study, the depth of the basement rocks is relatively high (~?80-m depth) in the western part of the study area and the basement rocks cropped out in the surface at the rest of the area. Our results are coinciding with the previous geological studies.  相似文献   

6.
This study deals with the evaluation of the structural setup of the Ras Banas area on the northwestern part of the Red Sea by using magnetic data. Different analyzing techniques were applied to achieve this goal including regional-residual separation, trend analysis, depth estimation, Euler deconvolution, horizontal gradient, analytic signal, and magnetic modeling. The results of these techniques were used to construct a deep-seated structural feature map.Lineament analysis indicates that the area was mainly affected by the NW, WNW, and NE tectonic trends. The magnetic modeling was performed along four profiles supported by Euler deconvolution, horizontal gradient, and analytic signal profiles. The modeled profiles show that the basement rocks composed of uplifted and down-faulted blocks at different depths as well as step-like structure. The basement rocks seem to be acidic in nature intruded by basic/ultrabasic dikes. Generally, the magnetic susceptibility ranges from 0.0003 to 0.04 cgs indicating acidic to basic/ultrabasic rock composition. The basement relief map shows an irregular basement surface, which varies greatly in depth from 1 to 5.6 km below sea level. The deep-seated structure map shows that the basement was highly affected by two main fault trends in the NW and NNE directions. The NW trending structures were intersected by younger left lateral NNE transform faults. These cross-faults dissect the area into a number of alternated and elongated blocks.  相似文献   

7.
Geophysical techniques such as gravity, magnetic and seismology are perfect tools for detecting subsurface structures of local, regional as well as of global scales. The study of the earthquake records can be used for differentiating the active and non-active fault elements. In the current study, more than 2,200 land magnetic stations have been measured using two proton magnetometers. The data are corrected for diurnal variations and then reduced by the International Geomagnetic Reference Field. The corrected data have been interpreted by different techniques after filtering the data to separate shallow sources (basaltic sheet) from the deep sources (basement complex). Both Euler deconvolution and 3-D magnetic modeling were carried out. The results of interpretation indicate that the depth to the upper surface of basaltic sheet ranges from <10 to 600 m, depth to the lower surface ranges from 60 to 750 m, while the thickness of the basaltic sheet varies from <10 to 450 m. Moreover, gravity measurements are conducted at 2,250 stations using a CG-3 gravimeter. The measured values are corrected to construct a Bouger anomaly map. The least squares technique is then applied for regional–residual separation. The third order of least squares is found to be the most suitable to separate the residual anomalies from the regional one. The resultant third-order residual gravity map is used to delineate the structural fault systems of different characteristic trends. The trends show an NW–SE trend parallel to that of Gulf of Suez, an NE–SW trend parallel to the Gulf of Aqaba and an E–W trend parallel to that of the Mediterranean Sea. Taking seismological records into consideration, it is found that most of the 24 earthquake events recorded in the study area are located on fault elements. This gives an indication that the delineated fault elements are active.  相似文献   

8.
曾凯  陈建国  肖凡 《江苏地质》2013,37(4):598-605
依据重力和航磁异常数据及其处理结果(Tilt导数和欧拉反褶积),对东天山戈壁沙漠覆盖区断裂构造和岩体重新进行了解译,结合岩石密度和磁性特征及前人研究成果,分析了东天山的构造格架。结果表明,东天山构造线主体方向为近EW向,构造格局具有南北分带的特点,重力和航磁异常图上密集梯级带对应研究区一级断裂,即康古尔塔格一黄山深断裂和阿奇克库都克一沙泉子断裂。重力和航磁原始异常经过Tilt导数和欧拉反褶积处理后,微弱信息得到明显增强,进而识别出一些新的断裂构造和岩体。  相似文献   

9.
The 2001 Bhuj earthquake (Mw 7.7) occurred in northwestern region of Indian peninsula has reactivated a couple of transverse faults to its surroundings. Intermediate to moderate magnitude earthquakes are occurring along these faults which includes recent Dholavira earthquake (Mw 5.1, 2012) suggesting distinct tectonic scenario in the region. We present the results of magnetotelluric (MT) impedance tensors analyses of 18 sites located along a profile cutting various faults in the uplifted Wagad block of the Kachchh basin. The MT time series of 4–5 days recording duration have been processed and the earth response functions are estimated in broad frequency range (0.01–1000 s). The observed impedance tensors are analyzed by using three decomposition techniques as well as by the phase tensor method constraining with the induction arrows. The analyses suggest distinct tectonic feature within the block bounded by the South Wagad Fault (SWF) and the North Wagad Fault (NWF) particularly in the period band of 1–10 s. In the south of NWF, the telluric vectors and the major axes of the phase ellipses are aligned in the NNW–SSE to NW–SE direction where as a dominant E–W strike is obtained for northern side of the NWF. The transverse geo-electric strike coincides with the prominent clustering of seismicity after the Bhuj earthquake and trend of the Manfara transverse fault is located in close vicinity of the study area. We therefore suggest the presence NNW–SSE trending transverse structural feature in the Wagad uplift of the basin appears to play significant role in the current seismicity of the active intraplate region.  相似文献   

10.
《Geodinamica Acta》2003,16(2-6):131-147
Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.  相似文献   

11.
The present study aims mainly to delineate and outline the regional subsurface structural and tectonic framework of the buried basement rocks of Abu El Gharadig Basin, Northern Western Desert, Egypt. The potential field data (Bouguer gravity and total intensity aeromagnetic maps) carried out in the Abu El Gharadig Basin had been analyzed together with other geophysical and geological studies. The execution of this study is initiated by transformation of the total intensity aeromagnetic data to the reduced to pole (RTP) magnetic map. This is followed by applying several transformation techniques and various filtering processes through qualitative and quantitative analyses on both of the gravity and magnetic data. These techniques include the qualitative interpretation of gravity, total intensity magnetic and RTP magnetic maps. Regional–residual separation is carried out using the power spectrum. Also, the analytic signal and second vertical derivative techniques are applied to delineate the hidden anomalies. Aeromagnetic anomalies in the area reflect significant features on the basement tectonics, on the deep-seated structures and on the shallow-seated ones. Major faults and intrusions in the area are indicated to be mainly along the NE–SW, NW–SE, ENE–WSW and E–W directions. The Bouguer gravity map indicates major basement fracturing, as well as variations in the sedimentary basins and ridges and subsequent tectonic disturbances. The most obvious anomalous trends on the gravity map, based on their frequencies and amplitudes, are along the NE–SW, ENE–WSW, E–W and NW–SE trends. The main of Abu EL Gharadig Basin depositional center does not show sharp variations, because of the homogeneity of the marine rocks and the great basement depths.  相似文献   

12.
This study presents analysis and interpretation of aeromagnetic data to construct subsurface structure maps and determine the depths to magnetic basement. Subsequent analysis steps are applied to the total magnetic intensity (TMI) data. These steps include Reduction to the Pole (RTP) map that was derived from the TMI map then subjected to spectral frequency analysis to isolate RTP map into high and low frequencies and determine pseudo-depth for each map from power spectrum in which there were two main average levels (interfaces) at depth 1.3 and 0.7 km for the deep-seated and near-surface magnetic structures, respectively. 3D Euler deconvolution technique is applied to calculate the depth to the magnetic contacts; the results show clustering of solutions, the shallow solutions are related to the outcrops less than 80 m from flight level, and the solutions which are related to sedimentary cover locations (Um al-Huweitat, Wasif, and Mohamed Rabah basins) are ranged between 200 and to more than 1100 m. Moreover, anomaly enhancement techniques such as tilt derivative (TD), horizontal tilt derivative (TDX), and source edge detect (SED) are applied to enhance shallow features, and determining structure element boundary for both shallow- and deep-seated anomalies and revealing possible faults such as 2D forward modeling are applied to selected profiles to adjust the interpreted structures and map the boundaries and basement relief of the three basins (Mohammed Rabah, Wasif, and Um al-Huweitat). The analysis shows that the study area is affected with network of dip–slip faults due to high shearing and compression stress which formed grabens and horsts at different depth levels in the study area. The trends of predominant faults related to deep-seated structures are NW–SE with depths ranged between 1 and 1.4 km and in regard to the shallow-seated structure, the predominant fault trends are NW–SE, NNW–SSE, and NNE–SSW with depths ranged between 0.3 and 0.8 km.  相似文献   

13.
Based on the new all-covering 3D seismic data and the drilling-logging data, we established the sequence stratigraphic framework for Dongying Depression and identified two kinds of structural systems in Palaeogene, i.e. the extensional structural system and the transtensional structural system. The extensional structural system consists of different normal faults that predominantly trend NE, EW, and NW. The attitudes of the normal faults vary in different tectonic settings. However, the transtensional structural system consists of some strike–slip faults and some normal faults. According to the analysis of the relationships between the faults and the sedimentary sequences of Dongying Depression, we considered that the extensional structural system was developed mainly from the Palaeocene to the middle Eocene, whereas the transtensional structural system was mostly developed from the middle Eocene to the Oligocene. In addition, we found that the structural systems had transformed since 43.5 Ma, when the subduction direction and activity rates of the Pacific Plate changed and the dextral strike–slip movement of the large-scale Tanlu fault zone started from eastern China. The extensional structural deformation was probably derived from the back-arc extension triggered by subduction rollback of the Pacific Plate under the Eurasian Plate, whereas the transtensional structural deformation was probably related to the regional dextral strike–slip movement induced by the subduction of the Pacific Plate and the continents’ collision between the Indian Plate and the Eurasian Plate.  相似文献   

14.
In this paper we tried to identify the main tectonic lineaments in Eastern Iran including Lut block and Sistan suture zone from the airborne geomagnetic data together with tilt filter. As the map of obtained lineaments from airborne geomagnetic data has been studied, four distinct set of lineaments has been identified: (i) north–south, (ii) east–west, (iii) northeast–southwest, and (iv) northwest–southwest that are concurrently with structural zones and area’s big faults. New faults which have been identified in this investigation are lineaments with trend northeast–southwest and east–west. The depth of these lineaments has been calculated through Euler modeling. Magnetic lineaments trending east–west have the most depth, so these lineaments are related to basement faults.  相似文献   

15.
A residual anomaly gravity map of the Maktar area has been processed via several methods including horizontal gradient, upward continuation, and Euler deconvolution to highlight structures hidden by sedimentary cover. These methods reinforce the existence of several faults inferred from geologic studies. This work outlines deep or near-surface faults that had remained hidden until now. The most important set of these faults is NE–SW trending, with depths in excess of 3,000 m. These faults limit the Northwestern limb of Balouta massif and restrain the Northwestern side of Oued Ousafa syncline. This last fault presents a thrust front which constituted the western continuity of a southern Tunisian thetys margin and a western Zaghouan scar prolongation. E–W striking faults refer to an arched beam of faults limiting Kessera plateau and others situated in the northern part of the Maktar plateau. N–S and NW–SE directions correspond to branches of less-apparent importance. Superposition of local maxima specifies dipping vergence of different proven structures. Results from this work show the importance of gravimetric data analysis in Maktar area and provide new insight into Central Atlas Tunisia structure such as new emergent segment front Alpine chain. The proposed map could be a basis for planning future hydrogeological and petroleum research in this region.  相似文献   

16.
The Bentong‐Raub Suture Zone (BRSZ) of Peninsular Malaysia is one of the major structural zones in Sundaland, Southeast Asia. It forms the boundary between the Gondwana‐derived Sibumasu terrane in the west and Sukhothai Arc in the east. The BRSZ is genetically related to the sediment‐hosted/orogenic gold deposits associated with the major lineaments in the Central Gold Belt of Peninsular Malaysia. In this investigation, the Phased Array type L‐band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in Peninsular Malaysia and provide detailed characterization of lineaments and curvilinear structures in the BRSZ, as well as their implication for sediment‐hosted/orogenic gold exploration in tropical environments. Major structural lineaments such as the Bentong‐Raub Suture Zone (BRSZ) and Lebir Fault Zone, ductile deformation related to crustal shortening, brittle disjunctive structures (faults and fractures) and collisional mountain range (Main Range granites) were detected and mapped at regional scale using PALSAR ScanSAR data. The major geological structure directions of the BRSZ were N–S, NNE–SSW, NE–SW and NW–SE, which derived from directional filtering analysis to PALSAR fine and polarimetric data. The pervasive array of N–S faults in the Central Gold Belt and surrounding terrain is mainly linked to the N–S trending of the Suture Zone. N–S striking lineaments are often cut by younger NE–SW and NW–SE‐trending lineaments. Gold mineralized trend lineaments are associated with the intersection of N–S, NE–SW, NNW–SSE and ESE–WNW faults and curvilinear features in shearing and alteration zones. Compressional tectonic structures such as the NW–SE trending thrust, ENE–WSW oriented faults in mylonite and phyllite, recumbent folds and asymmetric anticlines in argillite are high potential zones for gold prospecting in the Central Gold Belt. Three generations of folding events in Peninsular Malaysia have been recognized from remote sensing structural interpretation. Consequently, PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detailed structural analysis of fault systems and deformation areas with high potential for sediment‐hosted/orogenic gold deposits and polymetallic vein‐type mineralization along margins of Precambrian blocks, especially for inaccessible regions in tropical environments.  相似文献   

17.
The stratigraphic and tectonic setting in the northwest part of Himalayan belt is complex and thrusted due to the collision of Indian plate and the Eurasian plate. During the past, the Himalaya is divided into four parts; these are Outer Himalaya, Lesser Himalaya, Greater or Higher Himalaya and Tethys Himalaya. The appearance of basement rocks played a significant role in the Himalayan periphery for stratigraphic, structural and tectonic movement. The deformation pattern of the crustal rocks causing the rise of basement rocks which constitutes an integral part of crustal configuration during the evolutionary stages of the Himalaya. In this study, an attempt has been made to estimate the basement depth configuration using spectral analysis and Euler deconvolution technique of gravity data in the northwest Himalaya region. The elevation increases continuously from 500 m to 5100 m in SW to NE direction, however, Bouguer gravity anomaly decreases continuously from ?130 mGal to ?390 mGal in SW to NE direction due to the isostaic adjustment. Gravity anomaly is very low near Harsil, Badrinath and Joshimath area and observed higher elevation due to the deep rooted basement. However, there are extrusion of crystalline basement in and around the Badrinath area due to the resettlement of geologic process which are overlaid to the top surface of the sedimentary layers. Euler deconvolution technique has been applied to detect the direct basement depth and results show a good correlation with the average depth of the spectral analysis and other works carried by different authors. Three gravity profiles are selected in appropriate places orienting SW-NE direction with a profile length of 160 km, 150 km and 140 km respectively in the study area for calculating the average depth of the basement rock. The average basement depth calculated is around 11.27 km using the spectral analysis technique and results are well correlated with the results of various workers. Euler deconvolution studies along the three selected profiles have been interpreted. It has been observed that there are more number of cluster points falling between depth ranges of 10 to 15 km, dipping in SW to NE direction. Euler’s study shows deep rooted connection near Main Frontal Thrust (MFT), Main Boundary Thrust (MBT), Main Central Thrust (MCT), Bearing Thrust (BT) and Vaikrita Thrust (VT) locations as per profile study. Based on these studies three geological models have been prepared along the profiles showing different tectonic resettlement and depth of crystalline basement. Crystalline rocks exposed at the surface may be due to uplift along the shear in the MCT zone by kinetic flow basically, Munsiayari Thrust (MT) and VT in the of NW-Himalaya region.  相似文献   

18.
The aim of the present work is to evaluate the stress direction and the tectonic trends of the study area using magnetic anisotropy and potential field data interpretations (Bouguer and aeromagnetic). The specific objective of the gravity and aeromagnetic interpretation is to establish the trend and depth of the structural configuration of the basement rocks. Horizontal gradient techniques could to delineate directions of deep sources and enabled tracing several faults, lineaments and tectonic boundaries of basement rocks. The trend analysis shows N40°?C50°W, N10°?C20°W and N10°?C20°E which may be related to the Gulf of Suez, Red Sea and Gulf of Aqaba stresses. However, Euler Deconvolution technique was applied using the aeromagnetic data to provide reliable information about penetrated source depth (100 m and ??10.0 km) and trends of the subsurface sources (principally in NW and NE directions). Moreover, representative 72 oriented rock samples have been collected from seven sites in the study area. The rock magnetic properties and magnetic anisotropy analysis have been determined for all the studied samples. The interpretation clearly defined magnetic lineation at all sites and anisotropy of magnetic susceptibility (AMS) parameters. The stress direction of the studied area has been evaluated using magnetic anisotropy and geophysical analysis. Generally the estimated geophysical data analysis (Bouguer and aeromagnetic) are well consistent with the AMS interpretations of this study. The results indicated that the directions of predominant faults and foliations are NW-SE (related to the Gulf of Suez and Red Sea rifting) which indicate that the main stress and tectonic trend is NE-SW, which is more predominant in southern Sinai region. Moreover, it is clear that, the studied area was affected also by less predominant sources trended in NE-SW direction, which related to the tectonic activity of Gulf of Aqaba. The least predominant is north 40°?C50° east that is probably due to the Syrian Arc system. Finally, our results are extremely coincided with the previous stress directions derived from geological, seismological and tectonic analysis in northern Red Sea rift, Gulf of Suez and Sinai regions.  相似文献   

19.
Various techniques (horizontal and vertical derivatives, upward continuation, Euler deconvolution) have been applied to the gravity data from the Triffa's plain and the north flank of the Beni-Snassen massif to delineate various major geological structures such as faults and basins. These results allow the production of a structural map showing the fault systems for the survey area. This map forms the basis for planning future hydrogeological research in this region. To cite this article: D. Khattach et al., C. R. Geoscience 336 (2004).  相似文献   

20.
Makkah and central Red Sea regions have been re-evaluated from recent earthquake data analysis. Epicenters of recent seismic activity are concentrated in three local seismic zones. These are Ad Damm fault (NE), Nu’man–Makkah–Fatima (NW), and Jeddah-Red Sea (NW) seismic zones. Moreover, an extended seismic zone along the central part of Red Sea is observed. Most of these epicenters are distributed along tectonic faults, as indicated from the subsurface structure analysis of the aeromagnetic anomaly map. Some epicenters of small magnitudes are inaccurately located. The study indicates the existence of large active structural basin south of Makkah region, which traverse Ad Damm fault zone with the Red Sea transform faults. Slip vector analyses were carried out for 50 available earthquake focal mechanisms around Makkah region. In Nu’man, Makkah, and Fatima structural zones, the slip vectors generally trend NW and NNW. However, in the southern part at the Ad Dam structure zone, the slip vector trends NE–SW. These may result from the current complicated drifting motion of Arabian plate away from African plate combined with the opening of the Red Sea rift.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号