结构-地基体系的非比例阻尼影响及随机地震响应分析

针对结构-地基体系随机地震响应分析中存在的非比例阻尼耦合问题，采用不同非比例阻尼判断准则研究了结构-地基体系在不同刚度比，不同阻尼比下结构与地基间的阻尼耦合及体系不同振型间的阻尼耦合问题，推导了用于结构-地基非比例阻尼系统随机分析的小参数随机摄动分析公式，并用于地下大型有衬砌洞室的随机地震响应分析中。     

非比例阻尼线性体系地震反应计算的振型分解反应谱法

以非比例阻尼线性体系地震反应计算实数形式的一般解答为基础,推导得到了非比例阻尼线性体系水平地震作用计算的多种形式,建立了非比例阻尼线性体系地震反应计算振型分解反应谱法的基本过程与步骤。最后,以一个五层剪切型结构为例,通过与各种常用直接积分方法计算结果的比较,证实了本文非比例阻尼线性体系地震反应计算实数形式的一般解答的高精度与可靠性。通过对多种形式地震作用所得地震效应的比较,证实了非比例阻尼线性体系地震反应振型分解反应谱方法的可靠性及可行性。     

高层建筑水平地震反应阻尼器控制理论及试验研究

本文用阻尼器控制高层建筑水平地震反应，为此进行了理论分析及模型试验研究。文中首先提出一种有效的被动控制措施－阻尼筒控制系统，它构造简单，安装方梗，实用性广，阻尼筒控制系统具有显著的阻尼水平，使得施加阻尼筒控制的高层建筑具有非比例的阻尼分布，在地地震应分析中，建立了一种子空间复模态进程分析法，有效地改善了复模态方法的实际应用。在数值模拟研究中，对阻尼筒控制系统的阻尼参数及其在建筑上的安装装置进行了优     

多级串联非比例阻尼隔震结构地震响应分析

建立了多级串联非比例阻尼隔震结构动力分析模型;引用分区瑞利阻尼模型将非比例阻尼矩阵分解为瑞利阻尼矩阵和体现非比例阻尼的余项阻尼矩阵,推导出结构的阻尼矩阵;并编制了MATLAB动力时程分析程序,对一实际隔震工程进行地震响应分析.结果表明:随着下部结构刚度的增加,结构的层剪力比和隔震层位移响应峰值均趋向于基础隔震结构的对应值;当下部结构为一层,且层间刚度大于上部结构底层层间刚度4～6倍时,可以近似按基础隔震结构进行动力分析.     

考虑土壤影响时高层建筑等效模态阻尼比的计算方法

本文研究了在高层建筑抗震分析中的阻尼计算问题，在考虑土壤－结构相互作用的情况下，研究了等效模态阻尼比的五种计算方法，振型加权法、应变能加权法、动能加权法、传函数法和比例阻尼法，文中输入ＥＬ－Ｃｅｎｔｒｏ地震记录，对一个十层楼房的实例进行了数值计算，并对各种方法所得到的阻尼和响应值进行分析和比较，最后对这些方法作出了评价。     

不同阻尼特性材料组合结构的弹塑性动力时程响应计算

本文提出一种不必形成与存储总阻尼矩阵的非线性结构动力时程分析的算法,用于计算非比例、非经典阻尼结构弹塑性动力响应。该算法的软件实现简单,对现有比例阻尼结构分析程序稍加修改即可。基于此算法的计算机程序满足了由两种阻尼特性材料建造的建筑结构非线性动力时程分析的需要。     

随机地震响应的确定性算法

本文给出一个适宜于在电子计算机上执行的线性系统随机响应计算方法,并将它应用于海洋平台结构分析程序DASOS-J中。它的特点是易学易用,而且不因存在非比例阻尼矩阵或靠得很近的结构自振频率而在随机响应计算中引入误差,这是目前常用的其它方法不易做到的。     

基础隔震结构随机地震响应分析的复模态法

本文对多自由度基础隔震结构的随机地震响应问题进行了系统研究，首先建立了运动方程，然后用第一振型将上部结构展开，针对所得方程为非经典阻尼、非对称质量和非对称刚度情况，用复模态法解耦，获得了以第一振型表示的结构地震响应的解析解，对单自由度体系，此解即为结构响应的精确解，从而建立了两自由度体系在任意非经典阻尼与非对称质量和刚度情况下随机地震响应解析解分析的一般方法。本文方法也可用于带TMD减震结构、无损伤“加层减震”加固结构的随机地震响应分析与优化设计。     

基于约束模态综合法的非比例阻尼系统地震响应分析

为提高大型复杂结构体系的计算效率,在深入分析约束模态综合法原理的基础上,论述了非比例阻尼体系中约束模态综合法对阻尼矩阵的处理方法,并探讨了如何缩减对接界面自由度的问题。同时,通过算例详细说明了该方法在高层建筑结构动力时程分析中的应用。计算结果表明,在利用约束模态综合法求解非比例阻尼体系的动力问题时,文中所采用的阻尼矩阵的处理方法是有效的,与有限元直接法相比具有很好的精度。对于地基土-高层建筑结构体系的地震响应分析问题而言,缩减对接界面自由度的约束模态综合法可达到很好的计算精度,能够更大程度的提高计算效率,为大型复杂结构的动力时程分析研究和工程应用提供了一定的依据和方便。     

一种迭代算法在结构物理参数识别中的应用

本文在利用复合反演方法进行剪切型结构物理参数识别过程中,引入一种迭代算法来求解关于参数的病态方程组,探讨了几种比例阻尼形式的比例系数识别的处理方法。以10层剪切型框架结构为例,利用该迭代算法研究了无阻尼、三种比例阻尼形式以及噪信比为5％、10％的高斯白噪声等情形下的参数识别问题。结果表明,该迭代算法能很好地求解参数的病态方程组,且对四种阻尼形式和两种噪信比的噪声有很好的适应性。     

A pseudo‐force iterative method with separate scale factors for dynamic analysis of structures with non‐proportional damping

Dynamic equilibrium equations of structural systems with non‐proportional damping are coupled through the damping terms. Such coupling invalidates application of the classical modal superposition method. In this paper, a mode‐superposition pseudo‐force method is proposed. The coupled equilibrium equations are solved by an iterative process in which the coupling terms are treated as pseudo‐forces. A scale factor for each mode of the system is obtained by optimizing the iteration convergence. Through these uniquely solved scale factors, the modified modal equations not only converge much faster but also yield results with higher accuracy. A proof of the convergence of the iterative process is also presented. Copyright © 2002 John Wiley & Sons, Ltd.     

A method for the transfer function matrix of combined primary–secondary systems using classical modal decomposition

An iterative method is presented to compute the transfer function matrix of combined primary–secondary systems for seismic response analysis. It accounts for non‐proportional damping and dynamic interaction of the combined system. A closed form sequence is developed for the iterative computation of the transfer function matrix. Such sequence is assembled using independently the real classical mode frequencies, shapes and damping ratios of the primary system, and the natural frequency and critical damping ratio of the SDOF secondary system. The necessary and sufficient condition for convergence of the sequence is given in the paper. The method is illustrated through a couple of examples, including one of an appendix connected to a multi‐storey shear building. Convergence of the method is thoroughly analysed and peak responses are obtained using a spectral density function approach. Copyright © 2005 John Wiley & Sons, Ltd.     

变阻尼共轭梯度算法及其性能分析

为了提高反演的分辨率和计算效率,本文在传统阻尼共轭梯度法的基础上,提出了变阻尼共轭梯度算法.由于在最小二乘线性反演过程中,多数情况下都要计算偏导数矩阵,而偏导数矩阵列向量的长度大小决定了解向量在对应分量方向上前进的快慢,变阻尼共轭梯度算法的提出正是利用了偏导数矩阵的这一特点.从理论上讲,它要优于传统的固定阻尼共轭梯度法.最后通过计算实例证明了该算法计算精度高,稳定性好,收敛速度快.因此采用变阻尼共轭梯度算法进行地球物理反演是切实可行的.     

Initial versus tangent stiffness‐based Rayleigh damping in inelastic time history seismic analyses

In the inelastic time history analyses of structures in seismic motion, part of the seismic energy that is imparted to the structure is absorbed by the inelastic structural model, and Rayleigh damping is commonly used in practice as an additional energy dissipation source. It has been acknowledged that Rayleigh damping models lack physical consistency and that, in turn, it must be carefully used to avoid encountering unintended consequences as the appearance of artificial damping. There are concerns raised by the mass proportional part of Rayleigh damping, but they are not considered in this paper. As far as the stiffness proportional part of Rayleigh damping is concerned, either the initial structural stiffness or the updated tangent stiffness can be used. The objective of this paper is to provide a comprehensive comparison of these two types of Rayleigh damping models so that a practitioner (i) can objectively choose the type of Rayleigh damping model that best fits her/his needs and (ii) is provided with useful analytical tools to design Rayleigh damping model with good control on the damping ratios throughout inelastic analysis. To that end, a review of the literature dedicated to Rayleigh damping within these last two decades is first presented; then, practical tools to control the modal damping ratios throughout the time history analysis are developed; a simple example is finally used to illustrate the differences resulting from the use of either initial or tangent stiffness‐based Rayleigh damping model. Copyright © 2013 John Wiley & Sons, Ltd.     

Improved methods to transform frequency‐dependent complex stiffness to time domain

A method to transform the frequency‐dependent complex stiffness to the impulse response in the time domain was proposed in the previous paper. However, there is a problem in that the accuracy and the convergence of the transformed impulse response are not good in some cases. Moreover, the hysteretic damping was not considered in the previous study although it is essential for practical purposes. In this paper, transform method improvements are proposed. First, the accuracy and the convergence are improved by taking the concept of virtual mass into account. Then, a more improved method for transforming the complex stiffness with large hysteretic damping to the time domain is proposed using the least square method. It is well known that the rigorous transform of the hysteretic damping is impossible because it is non‐causal. So this method is thought to be an approximate causalization process. Copyright © 2006 John Wiley & Sons, Ltd.     

Problems encountered from the use (or misuse) of Rayleigh damping

Rayleigh damping is commonly used to provide a source of energy dissipation in analyses of structures responding to dynamic loads such as earthquake ground motions. In a finite element model, the Rayleigh damping matrix consists of a mass‐proportional part and a stiffness‐proportional part; the latter typically uses the initial linear stiffness matrix of the structure. Under certain conditions, for example, a non‐linear analysis with softening non‐linearity, the damping forces generated by such a matrix can become unrealistically large compared to the restoring forces, resulting in an analysis being unconservative. Potential problems are demonstrated in this paper through a series of examples. A remedy to these problems is proposed in which bounds are imposed on the damping forces. Copyright © 2005 John Wiley & Sons, Ltd.     

基于楼层剪力的等效阻尼比计算方法研究

针对现有附加有效阻尼比计算方法存在的问题,本文从能量的角度揭示了阻尼比对结构影响的机理。从结构设计的角度,提出一种在时程分析下基于楼层剪力的消能减震结构等效阻尼比计算方法。对布置黏滞阻尼器和软钢阻尼器的消能减震模型,采用本文提出的等效阻尼比计算方法,建立等效结构进行结构响应对比。结果表明,由该计算方法得到的等效阻尼比能够准确地评估阻尼器在结构中的耗能效果,建立的等效结构能够准确反映消能减震结构实际情况。基于楼层剪力的等效阻尼比计算方法通过等效结构楼层剪力大于或等于消能减震结构楼层剪力判断迭代完成,该方法计算过程不涉及阻尼器参数及结构形式,适用于所有阻尼器类型与结构类型。计算得到的等效结构进行设计能够确保结构设计的安全。     

基于遗传算法的粘滞阻尼器减震结构优化设计研究

以线性粘滞阻尼器加固剪切型规则框架结构为研究对象,基于能量原理提出阻尼系数正比于层间位移(α+1)次方的分配方式,在此基础上提出了一种基于遗传算法的粘滞阻尼器减震结构优化设计方法.使得中震下结构最大层间位移角小于允许值,以满足"中震不坏"的设计目标,同时令附加总阻尼系数最小,满足经济性要求.以12层规则框架为例,分别采...     

Modal methods in the dynamics of systems with non-classical damping

When damping in a system is both significantly high and its distribution is non-classical the solution of dynamical problems by conventional modal analysis is complicated by the presence of coupling between the normal co-ordinates. Further, the convergence of a solution may be erratic with successive modal additions, leading to the need to include a larger number of modes than would otherwise be expected. In this paper methods of modal analysis in structural dynamics are discussed and their derivations briefly given. These include the conventional mode displacement method and the force summation method, employing normal modes, and the analogous procedures with damped modes. In the latter, dynamic response equations are not coupled. Dynamic loading solutions by the four approaches, each taking account of the non-classical damping distribution, are demonstrated with a simple model representing a structure on a compliant foundation. The results strongly suggest that the use of damped modes with force summation could be the most effective procedure when damping is non-classical.