既有钢筋混凝土框架结构的多指标云模型地震损伤评估

目前的既有钢混结构地震损伤研究没有同时考虑不同抗震设计规范差异和耐久性两个因素对结构抗震性能的影响,且损伤指标较简单,在动力损伤分析中也存在局限。基于云模型的特点,提出了包括弹塑性耗能差率、刚度损伤指数、层间位移角和顶点位移角的多元结构损伤状态综合评估方法,能够同时考虑结构各损伤指数的随机性和模糊性。考虑不同版本抗震设计规范造成的结构性能差异和耐久性下降对结构性能的影响,设计3个典型五层钢混框架结构,进行增量动力分析,验证损伤评估方法的准确性。结果表明：随着抗震规范版本的更新,结构的损伤程度有适当减轻;同一结构的损伤程度因混凝土碳化作用先减轻后加重;采用弹塑性耗能差率表征既有结构的地震损伤效果优于刚度损伤指数;基于多指标云模型损伤评估方法获得的云模型综合隶属度和综合损伤值能够更加细化和精确地描述结构损伤状态。     

酸雨环境下砌体结构地震易损性研究

对4榀相同特性的砖墙进行不同程度的酸雨腐蚀试验及低周反复荷载试验,得出其在不同腐蚀循环次数下的滞回曲线。基于陆新征-曲哲恢复力模型对砖墙试件进行模拟分析,并与试验结果进行对比,验证得出三弹簧单元模型能够较准确预测砌体构件的滞回性能。利用三弹簧单元模型对不同腐蚀次数下砌体结构进行IDA分析,得出不同腐蚀次数下砌体结构的易损性曲线,通过对"小震"、"中震"、"大震"下结构失效概率的分析得出,酸雨腐蚀能够严重影响结构的力学性能,使得结构的抗震性能显著下降。     

基于BP神经网络的有限特征参数砌体结构震害等级推演

详细的建筑结构特征参数是得到合理地震易损性分析结果的基础。本文给出了一种结合已有地震易损性分析成果,在具备有限特征参数的情况下,利用BP神经网络进行单体或群体结构震害等级推演的方法。以陕西省渭南市607栋设防砌体易损性评估结果为样本构建了一个3层BP神经网络模型,并对北京市海淀区近2万栋设防砌体不同地震烈度下的可能破坏状态进行推演,结果能够反映区域本地化特征,也与抗震设计目标和震害案例相符。该方法适用于少量特征参数下单体或群体结构的快速震害等级推演,可为相似烈度地区的建筑结构风险评估提供参考。     

钢框架结构的地震损伤研究

基于预定损伤法对钢框架构件主要设计参数进行损伤敏感度分析,研究主要设计参数与钢框架结构梁、柱损伤的关系;揭示钢框架结构梁、柱的损伤及梁、柱线刚度比、结构高宽比、柱轴压比、锈蚀率对楼层损伤的影响规律;获得楼层的损伤与整体结构损伤的关系,最终建立钢框架结构的损伤演化模型。研究成果可为建立地震激励下钢框架结构的损伤模型提供理论基础和数据支持。     

大震下村镇建筑砌体结构的抗震性能数值分析

为探讨村镇建筑低层砌体结构在大震下的动力响应及损伤分布情况,基于农居结构性能实地调查与检测,在有限元软件ABAQUS中建立了不同抗震构造措施的砌体结构有限元模型,并进行结构动力特性及大震下弹塑性时程的分析,对比它们的自振特性参数、位移响应参数及损伤破坏形态。分析表明,低层砌体结构合理设置构造柱后结构自振周期略有减小,但振型不变;在弹性变形阶段构造柱能有效约束结构的动力位移响应,进入塑性变形后构造柱可提高砌体结构的耗能能力,但值得注意的是,结构刚度退化后构造柱会加剧纵横向抗侧刚度的不均衡性;低层砌体结构合理设置圈梁构造柱可有效抑制承重横墙的裂缝发展及楼屋盖发生支座失效破坏,且可以明显削弱结构的扭转效应。     

System identification and damage evaluation of degrading hysteresis of reinforced concrete frames

In this study, signal processing approaches and nonlinear identification are used to measure seismic responses of reinforced concrete (RC) structures using the shaking table test. To analyze structural nonlinearity, an equivalent linear system with time‐varying model parameters, singular spectrum analysis to elucidate residual deformation, and wavelet packet transformation analysis to yield the energy distribution among components are adopted to detect the nonlinearity. Then, damage feature extraction is conducted using both the Holder exponent and the Level‐1 detail of the discrete wavelet component. Finally, the modified Bouc‐Wen hysteretic model and the system identification process are employed to the shaking table test data to evaluate the physical parameters, including the stiffness degradation, the strength deterioration and the pinching hysteresis. Finally, the identified stiffness and strength degradation functions from the test data of RC frames in relation to the degree of ground shaking, damage index and the identified nonlinear features are discussed. Based on the proposed method, both signal‐based and model‐based identifications, the relationship between the damage occurrence and severity of structural damage can be identified. Copyright © 2010 John Wiley & Sons, Ltd.     

西北农居震害构成及抗震性能综合影响因素分析

整理西北地区部分地震的震害资料,对西北五省的主要农居进行震害总结,分析不同结构农居震害和抗震性能,发现不同结构的抗震性能差别较大,并针对不同结构提出相应的防震减灾措施。从地震动特性、场地和地基基础、结构的自身特性等方面分析影响农居民房的抗震能力,并根据西北农居震害特点给出了防震减灾方面的一些建议。     

A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions

This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd.     

Development of fragility functions as a damage classification/prediction method for steel moment‐resisting frames using a wavelet‐based damage sensitive feature

Fragility functions are commonly used in performance‐based earthquake engineering for predicting the damage state of a structure subjected to an earthquake. This process often involves estimating the structural damage as a function of structural response, such as the story drift ratio and the peak floor absolute acceleration. In this paper, a new framework is proposed to develop fragility functions to be used as a damage classification/prediction method for steel structures based on a wavelet‐based damage sensitive feature (DSF). DSFs are often used in structural health monitoring as an indicator of the damage state of the structure, and they are easily estimated from recorded structural responses. The proposed framework for damage classification of steel structures subjected to earthquakes is demonstrated and validated with a set of numerically simulated data for a four‐story steel moment‐resisting frame designed based on current seismic provisions. It is shown that the damage state of the frame is predicted with less variance using the fragility functions derived from the wavelet‐based DSF than it is with fragility functions derived from an alternate acceleration‐based measure, the spectral acceleration at the first mode period of the structure. Therefore, the fragility functions derived from the wavelet‐based DSF can be used as a probabilistic damage classification model in the field of structural health monitoring and an alternative damage prediction model in the field of performance‐based earthquake engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

无人机摄影技术在精河地震房屋震害定量评估中的应用

利用2017年8月9日精河6.6级地震后获取的高分辨率无人机影像，对叶里斯南也肯村153栋房屋进行结构分类和震害解译，获取研究区内土木结构、砖木结构、砖混结构、框架结构4种类型房屋数量及震害特征，并依据解译结果计算每种结构房屋平均震害指数。由于研究区内砖木结构、砖混结构、框架结构房屋数量偏少，房屋内部的震害难以用无人机影像识别，这3类房屋的震害解译结果与现场调查结果相比差别较大，而土木结构房屋平均震害指数及所对应的地震烈度结果与现场调查结果基本一致，表明无人机影像可为房屋震害定量评估提供重要参考。     

A probabilistic framework for correlated seismic downtime and repair cost estimation of geo‐structures

An important component of probabilistic risk assessment methods is the development of models to quantify the direct consequences of damage to geo‐structural components for a given intensity of the hazard. This paper presents a general probabilistic framework for correlated repair cost and downtime estimation of geo‐structures exposed to seismic hazards. The framework uses as input the results of nonlinear time‐history analysis of geo‐structures for the set of earthquake records that are representative of the seismic hazard models for the region of interest. The repair cost and downtime are estimated for individual earthquakes probabilistically considering the uncertainties associated with damage states. In addition, the formulation of the repair cost and downtime accounts for the reduction in the repair requirements as the number of damaged components in the given damage state increases. An analytical linear and two bilinear regression models are proposed for conditional correlated seismic repair cost and downtime estimation of geo‐structures given the intensity measure. The proposed framework is demonstrated by developing seismic repair models of a typical pile‐supported wharf structure on the west coast of the United States. The presented framework is general and can be applied to other types of geo‐structures and hazards and can include other decision variables such as loss of life as well. Copyright © 2013 John Wiley & Sons, Ltd.     

用于结构健康诊断的动静结合法及其试验验证

介绍了一种用于梁式结构的健康诊断方法,该方法以具有较高测试精度的低阶模态参数和静力测试参数为损伤识别量,适用于本构相同的多个结构或构件的健康诊断.具体实施中只选取少量结构作为样本,对其进行静、动力的联合测试,以获得静力、动力参数间的数学回归关系,依此关系对其余的结构仅通过动力测试便可获得等效于静力加载法的健康诊断效果.以12个不同损伤程度的钢桁架结构为试验对象,对其静、动参数的相关性进行了研究.结果表明,桁架的静力刚度和一阶固有频率与桁架的损伤程度密切相关,二者可作为标识桁架损伤的静、动参数.静、动参数对桁架的损伤程度指示明确,规律是损伤越大,静、动参数值越小.采用最小二乘法建立了桁架静、动参数间数学关系式,说明梁式结构的静、动参数密切相关,动静结合法可行.     

大跨度钢管混凝土拱桥抗震性能指标研究

高轴压比钢管混凝土墩柱的试验结果对钢管混凝土拱肋具有较大的借鉴意义。为明确大跨度钢管混凝土拱桥的抗震性能指标,研究了高轴比钢管混凝土构件的破坏过程及延性性能。以弯矩作为性能指标将高轴压比钢管混凝土构件的试验破坏过程分为轻微损伤、有限损伤与严重损伤3个阶段,结合钢管混凝土截面性能状态的数值分析,探讨了高轴压比钢管混凝土构件的破坏机理。结果表明:高轴压比钢管混凝土构件具有一定的可用延性;提出了以计算等效屈服弯矩作为抗震性能指标,适当利用延性和实现钢管混凝土拱桥的有限损伤抗震设计,并给出了与有限损伤相关的截面性能状态及参数。研究成果弥补了规范在此方面的不足,可供高烈度地震区大跨度钢管混凝土拱桥抗震设计时参考。     

川南地区砖混结构房屋典型震害及地震易损性研究

以川南地区为研究区,并以在建造方式上具有明显当地地域特征的砖混结构房屋为研究对象,结合砖混结构房屋建造特点及川南历史地震(如长宁6.0级地震)震害调查结果等,分析砖混结构房屋典型震害特征,统计其在不同烈度下不同破坏等级的比例,采用经验分析法得到初步的易损性矩阵。在此基础上,针对因样本局限性造成的结构在高烈度下破坏比例不全,使实际易损性矩阵缺失的问题,通过插值法,推算高烈度下的破坏比例,补全经验易损性矩阵,拟合出易损性曲线,建立以震害统计为主、数值模拟为辅的砖混结构易损性分析模型;并基于平均震害指数对比分析,对易损性分析的可靠性进行检验。结果表明,构建的易损性矩阵能客观反映川南地区砖混结构房屋的抗震能力,对开展震害预测、灾害损失评估及震害风险评估等工作具有实际应用价值。     

Centrifuge modelling for evaluation of seismic behaviour of stone masonry structure

Many surviving ancient monuments are freestanding stone masonry structures, which appear to be vulnerable to horizontal dynamic loads such as earthquakes. However, such structures have stood for thousands of years despite numerous historic earthquakes. This study proposes a scaled-down dynamic centrifuge modelling test to study how these masonry structures resist seismic loading. The test is proposed for seismic risk assessments to evaluate risk of damage from a future seismic event. The seismic behaviour of a 3-storey, freestanding stone block structure has been modelled and tested within a centrifuge. Models were made at 3 different scales and dynamic tests were conducted using different centrifugal acceleration fields so that the behaviours could be transformed to an equivalent full-scale prototype and compared. Data from 2 earthquakes and a sweeping signal were used to simulate the effects of earthquake ground motion within the centrifuge. The acceleration and frequency responses at each storey height of the model were recorded in different centrifugal acceleration fields. Similar behaviours appeared when the results of the small-scale models were transformed to a full-size prototype scale. This confirms that the seismic behaviour of stone masonry structures can be predicted using scaled-down models.     

砌体结构在2008汶川大地震中的震害经验

本文首先列举了砌体结构在2008汶川大地震中的典型震害现象,通过这些现象分析了此次地震中砌体结构的震害特点,归纳了其震害规律和教训,总结了必须坚持的抗震原则及对今后砌体结构抗震设计的启示,同时,探讨了几个应该注意的重点抗震问题,提出了进一步加强砌体结构抗震性能的建议。文中指出,砌体结构只要坚持正确的抗震理念,加强构造措施,落实抗震规范的设计要求,保证施工质量,就能达到相应的抗震设防目标。     

基于BP神经网络模型的多层砖房震害预测方法

针对传统的基于地震烈度的建筑物震害预测方法的不足,本文以地震动峰值加速度作为建筑物震害预测的地震动指标,结合几次大地震中多层砖房的震害实例,提出了一种基于BP神经网络模型的建筑物震害预测方法,模型的输入为反映结构抗震性能的各类物理参数,输出为给定地震动峰值加速度下建筑物破坏状态的概率。研究表明:基于BP网络模型的多层砖房的震害预测结果与震害实例的实际情况比较吻合,本文的思路和方法可推广于其他不同类型的建筑结构的震害预测。     

Response-based damage assessment of structures

The structure's ability to survive an earthquake may be measured in terms of the expected state of damage of the structure after the earthquake. Damage may be quantified by using any of several damage indices defined as functions whose values can be related to particular structural damage states. A number of available response-based damage indices are discussed and critically evaluated for their applicability in seismic damage evaluation. A new rational approach for damage assessment is presented which provides a measure of the physical response characteristics of the structure and is better suited for non-linear structural analysis. A practical method based on the static pushover analysis is proposed to estimate the expected damage to structures when subjected to earthquakes of different intensities. Results of the analysis of ductile and non-ductile reinforced concrete buildings show that the proposed procedure for damage assessment gives a simple, consistent and rational damage indicator for structures. Copyright © 1999 John Wiley & Sons, Ltd.     

Seismic damage estimation for low- and mid-rise buildings in japan

While much effort has been spent on analysis of individual structures, building class seismic damage estimators, of value in disaster planning, code-writing, city planning, national hazards policy formulation, etc., have been little investigated. Based largely on data from Sendai City, Japan in the 12 June, 1978 Miyagiken-oki earthquake (M_L = 7.4), estimators of seismic damage for low- and mid-rise buildings in urban Japan have been determined. For low-rise buildings, based on damage to over 60,000 buildings, damage ratios for onset of damage and collapse and for cost of damage are found to correlate best with response spectra at 0.75 s. Using published test data and average building properties, a seismic damage model explains the low-rise building behaviour and permits examination of the effect of structural changes on the estimated damage. For mid-rise buildings, damage states (0: none, 4: total) are determined as a function of maximum storey displacement, based on published natural period determinations (pre- and post-earthquake) for 189 mid-rise buildings in Sendai. The effects of structural changes on expected damage can also be estimated. With these two building class damage estimators, a large part of future seismic damage to urban Japan can be estimated, as well as the effects of various mitigation measures.     

地震折射波法在郑州市西区浅层勘探中的应用

在城市活断层勘探中,对于面波干扰大、地震反射波法难以开展工作的区域,可尝试利用地震折射波法进行探测,并对折射波法探测的原始记录采用时间项、差异时距曲线和有限差分成像等方法进行综合计算、分析,以探索折射波法在城市活断层勘探中的应用成效。文中针对郑州市须水断层西段浅层地震折射波法勘探记录,利用时间项、差异时距曲线和有限差分成像等计算方法,获取剖面速度结构与界面构造;综合震相特征、计算结果等资料确定主要地层的界面深度和构造特征,3种方法都取得了相近的结论。后又通过在测线上4个钻孔资料的验证,认为3种方法的计算结果与钻孔资料相吻合,说明折射波法勘探在城市活断层探测中的应用是可行的