Rock pillars shaped by columnar joints in granite at Mt. Mizugaki,Central Japan

Rock pillars of granite form a special type of characteristic topography in granite, but their origin is not well understood, partly because their 3D morphology has never been well characterized. Rock pillars were investigated at Mt. Mizugaki, which is underlain by Neogene granite that intruded into the Cretaceous accretionary complex in central Japan. Three rock pillars and their surrounding areas were investigated in detail using unmanned aerial vehicle (UAV) images and structure from motion (SfM). The rock pillars were up to 70 m high and were shaped by columnar joints, which has hardly been reported before in granitic rocks. Columnar joints in granite are much larger than columnar joints in volcanic rocks. The columnar joints curved vertically, and some of them showed dipyramid shapes. The large size and curved morphology of the columnar joints may be the result of the slow cooling of the granite, compared to that of volcanic rocks. Thus, the columnar joints at Mt. Mizugaki made large, high rock pillars, which are not common in volcanic rocks.     

The emplacement of acid magma in the epizone,and the relationship with ignimbrites,in North Queensland,Australia

There is an aggregate outcrop of 12,000 square miles of Permian-Triassic acid igneous rocks inland from Cairns and Townsville, North Queensland. The rocks consist of ignimbrite and rhyolite, which are structurally and magmatically related to three high-level intrusions the Herbert River, Esmeralda, and Elizabeth Creek Granites. Most of the igneous rocks intrude the Precambrian Georgetown Inlier, but some of them intrude along a fractured zone on the junction of the Inlier and the shelf zone of the adjacent Palaeozoic Tasman Geosyncline. The Upper Palaeozoic — Triassic igneous period consists of two main epochs, both consisting of granite, ignimbrite, and rhyolite. In both epochs granite intrudes the comagmatic and coeval ignimbrite and rhyolite. Rapid horizontal movement of granitic magma through the epizone and major fracturing of the crust are postulated to explain the widespread intrusion of the granite. The granitic magma was probably initially generated 5 miles below the surface of the crust by partial melting of the sediments at the base of the Tasman Geosyncline. Epeirogenic movement in the Precambrian Inlier area formed sheet-like fractures, which provided channels for rapid horizontal movement of the granitic magma. This magma was emplaced along the fractured marginal zone of the Inlier to form a thick sill-like body of granite — the Herbert River Granite — in the first epoch. Magma for the second epoch was derived from melting of the lower part of the granite of the first epoch. Renewed fracturing of the Inlier area formed cauldron subsidence areas and rift, which were quicly filled with rhyolite and ignimbrite. In these collapsed areas the granitic magma crystallized as the Elizabeth Creek and Esmeralda Granites under an insulating cover of about 1,000 feet of rhyolite and ignimbrite.     

Petrogenetic implications and geochronology of middle Miocene Tannayama igneous rocks,Goto Islands,Japan Sea southern margin,northwestern Kyushu,Japan

The subduction of “hot” Shikoku Basin and the mantle upwelling related to the Japan Sea opening have induced extensive magmatism during the middle Miocene on both the back-arc and island-arc sides of southwest Japan. The Goto Islands are located on the back-arc side of northwestern Kyushu, and middle Miocene granitic rocks and associated volcanic, hypabyssal, and gabbroic rocks are exposed. The igneous rocks at Tannayama on Nakadori-jima in the Goto Islands consist of gabbronorite, granite, granite porphyry, diorite porphyry, andesite, and rhyolite. We performed detailed geological mapping at a 1:10 000 scale, as well as petrographical and geochemical analyses. We also determined the zircon U–Pb age dating of the igneous rocks from Tannayama together with a granitic rock in Yagatamesaki. The zircon U–Pb ages of the Tannayama igneous rocks show the crystallization ages of 14.7 Ma ± 0.3 Ma (gabbronorite), 15.9 Ma ± 0.5 Ma (granite), 15.4 Ma ± 0.9 Ma (granite porphyry), and 15.1 Ma ± 2.1 Ma (rhyolite). Zircons from the Yagatamesaki granitic rock yield 14.5 Ma ± 0.7 Ma. Considering field relationships, new zircon data indicate that the Tannayama granite formed at ~16–15 Ma, and the gabbronorite, granite porphyry, diorite porphyry, andesite, and subsequently rhyolite formed at 15–14 Ma, which overlaps a plutonic activity of the Yagatamesaki. The geochemical characteristics of the Tannayama igneous rocks are similar to those of the tholeiitic basalts and dacites of Hirado, and the granitic rocks of Tsushima in northwestern Kyushu. This suggests that the Tannayama igneous rocks can be correlated petrogenetically with the igneous rocks in those areas, with all of them generated by the upwelling of hot mantle diapirs during crustal thinning in an extensional environment during the middle Miocene.     

Basaltic pillow mounds in the Vinalhaven intrusion, Maine

The Vinalhaven intrusion is a dominantly granitic pluton of probable Devonian age, located on Vinalhaven Island and adjacent islands, Maine. It consists of four main units: coarse-grained granite, fine-grained granite, a gabbro-diorite unit consisting of interlayered mafic, hybrid and granitic rocks, and a heterogeneous granitic unit. The gabbro-diorite unit occurs along the south and east coast of the island as a sheet-like body, hundreds of meters to more than 1 km thick, that dips beneath the central granitic units and rests on heterogeneous granitic rocks that form the base of the intrusion and are exposed on islands to the southeast. Load-cast and pipe structures at the bases of mafic sheets indicate that the gabbro-diorite unit represents a sequence of basaltic injections that ponded on crystal-rich mush at the base of a silicic magma chamber and variably interacted with overlying crystal-poor granitic magma. The pluton, therefore, represents a fossilized silicic magma chamber that was periodically replenished by basaltic magma. Near the base of the gabbro-diorite unit, some basaltic injections produced large mounds up to more than 10 m high and 100 m wide of tightly packed, meter-scale chilled basaltic pillows, tubes and sheets in a granitic matrix. The mounds appear to represent flow fronts of basaltic injections that entered and ponded on the floor of a silicic magma chamber. Although physical conditions differ significantly, these plutonic pillow mounds appear to share many characteristics with submarine pillow basalts and lava flows.     

Mineral chemistry and geothermobarometry of Moshirabad pluton,Qorveh, Kurdistan,western Iran

The Moshirabad pluton is located southwest of the Sanandaj–Sirjan Metamorphic Belt, Qorveh, western Iran. The pluton is composed of diorite, monzodiorite, quartz diorite, quartz monzodiorite, tonalite, granodiorite, granite, aplite, and pegmatite. In this study 31 samples from various rocks were chosen for whole‐rock analyses and 15 samples from different lithologies were chosen for mineral chemical studies. The compositions of minerals are used to describe the nature of magma and estimate the pressure and temperature at which the Moshirabad pluton was emplaced. Feldspar compositions are near the binary systems in which plagioclase compositions range from An₅ to An₅₃ and alkali‐feldspar compositions range from Or₉₁ to Or₉₇. Mafic minerals in the plutonic rocks are biotite and hornblende. Based on the composition of biotites and whole‐rock chemistry, the Moshirabad pluton formed from a calc‐alkaline magma. Amphiboles are calcic amphiboles (magnesio‐hornblende or edenite). Temperatures of crystallization, calculated with the hornblende–plagioclase thermometer, range 550–750°C. These temperatures indicate that plutonic rocks have undergone some retrogressive changes in their mineral compositions. Aluminum‐in‐hornblende geobarometry indicates that the Moshirabad pluton was emplaced at pressures of 2.3–6.0 kbar, equal to depths of 7–20 km, but with consideration of regional geology, lower pressures than the above pressure range are more probable. Alteration of amphiboles can be the reason for some overestimation of pressures.     

A study of the depth of weathering and its relationship to the mechanical properties of near-surface rocks in the Mojave Desert

Weathered granite extends 70 m deep at Hi Vista in the arid central Mojave Desert of southern California. The low strength of this granite is due to the alteration of biotite and chlorite montmorillonite. Deep weathering probably occurs in most granites, although we cannot rule out some anomalous mechanisms at Hi Vista. Geophysical instruments set in these slightly altered rocks are limited by the unstable behavior of the rocks. Thus, tectonic signals from instruments placed in shallow boreholes give vague results. Geophysical measurements of these weathered rocks resemble measurements of granitic rocks near major faults. The rheology of the rocks in which instruments are placed limits the useful sensitivity of the instruments.     

Spatial distribution of the apatite fission‐track ages in the Toki granite,central Japan: Exhumation rate of a Cretaceous pluton emplaced in the East Asian continental margin

The Cretaceous Toki granitic pluton of the Tono district, central Japan was emplaced in the East Asian continental margin at about 70 Ma. The Toki granite has apatite fission‐track (AFT) ages ranging from 52.1 ±2.8 Ma to 37.1 ±3.6 Ma (number of measurements, n = 33); this indicates the three‐dimensional thermal evolution during the pluton's low‐temperature history (temperature in the AFT partial annealing zone: 60–120 °C). The majority of the Toki granite has a spatial distribution of older ages in the shallower parts and younger ages in the deeper parts, representing that the shallower regions arrived (were exhumed) at the AFT closure depth earlier than the deeper regions. Such a cooling pattern was predominantly constrained by the exhumation of the Toki granitic pluton and was related to the regional denudation of the Tono district. The age–elevation relationships (AERs) of the Toki granite indicate a fast exhumation rate of about 0.16 ±0.04 mm/year between 50 Ma and 40 Ma. The AFT inverse calculation using HeFTy program gives time‐temperature paths (t–T paths), suggesting that the pluton experienced continuous slow cooling without massive reheating since about 40 Ma until the present day. A combination of the AERs and AFT inverse calculations represents the following exhumation history of the Toki granite: (i) the fast exhumation at a rate of 0.16 ±0.04 mm/year between 50 Ma and 40 Ma; (ii) slow exhumation at less than 0.16 ±0.04 mm/year after 40 Ma; and (iii) exposure at the surface prior to 30–20 Ma. The Tono district, which contains the Toki granite, underwent slow denudation at a rate of less than 0.16 ±0.04 mm/year within the East Asian continental margin before the Japan Sea opening at 25–15 Ma and then within the Southwest Japan Arc after the Japan Sea opening, which is in good agreement with representative denudation rates obtained in low‐relief hill and plain fields.     

Geology of the ignimbrites and the associated volcano–plutonic complex of the Ezine area, northwestern Anatolia

The Ezine region is located in the northwestern part of Anatolia where young granitic and volcanic rocks are widespread and show close spatial and temporal association. In this region magmatism began with the Kestanbol granite, which intruded into metamorphic basement rocks, and formed contact metamorphic aureole. To the east and southeast the pluton is surrounded by hypabyssal rocks, which in turn, are surrounded by volcanic associations. The volcanic rocks may be divided into two main groups on the basis of their lithological properties. Lavas and lahar deposits dominate the northern sector while ignimbrites dominate the southern sector. The ignimbrite eruptions were formed partly coevally with the plutonic and the associated volcanic rocks during the early Miocene. They appear to have been associated in a caldera collapse environment. Geochemical properties of the plutonic and the associated volcanic assemblages indicate that the magmas are hybrid and co-genetic and, were formed from a similar mantle source, under a compressional regime prior to the opening of the present E–W-trending graben of the Aegean western Anatolian region.     

A felsic dyke swarm formed under the sea: the Archean Hunter Mine Group,south-central Abitibi Belt,Quebec, Canada

An extensive rhyolitic dyke swarm has intruded subaqueous pyroclastic deposits, iron-formations, hyaloclastite breccias and lava flows of the 2730 Ma Hunter Mine Group (HMG) in the south-central part of the Archean Abitibi belt, Quebec. The dyke swarm has a minimum width of 500 m and can be traced perpendicular to the section for 2.4 km. Based on crosscutting relationships, chilled margins, quartz content and colour, five distinct dyke generations have been established. Each dyke generation has several magmatic pulses as indicated by parallel rows of columnar joints. Absence of brecciation between parallel rows suggests extremely brief intervals between magma pulses. The central parts of most dykes display inverted V-shaped patterns of columnar-joint convergence, inferred to indicate differential cooling during the late stages of dyke propagation. The dykes commonly display delicate spherulites suggesting rapid cooling, solidification temperatures between 400 and 600°C and penecontemporaneous devitrification. Quartz-feldspar aggregates in the groundmass have locally developed microgranophyric textures. Large spherulites near the chilled margins probably formed at temperatures below 400°C. Percolation of abundant water throughout the dyke complex is suggested by ubiquitous prominent chilled dyke margins. Development of a chilled margin 500 m along one dyke suggests that water percolated at least 500 m below the water/rock interface. Because the dykes intruded subaqueous pyroclastic deposits of similar composition, dyke emplacement below the sea floor is inferred. Interstratification of pillowed flows and brecciated pillowed flows containing rhyolite fragments at the top of the 4–5-km-thick sequence indicates that the central felsic complex probably never emerged during its evolutionary history, supporting the contention that the felsic dyke complex was emplaced beneath the Archean sea floor.     

内蒙古锡林浩特I型花岗岩的时代及构造意义

在内蒙古锡林浩特水库地区出露的花岗岩确定为I型花岗岩,具有较高的Cr、Co、Ni丰度。Ca、Al含量和N2O／K2O比值较高,Fe、Mg含量较低。微量元素蛛网图中显示出明显的Nb、Ta、P、Ti负异常。在SiO2-K2O及AFM图中,花岗质岩石投在钙碱性系列区;在构造环境判别图中,花岗质岩石样品都投在火山弧＋同碰撞花岗岩区。锆石测年结果显示平均年龄为317．0±4．0Ma,属晚石炭世。这套晚石炭世岛弧花岗岩的存在,表明加里东期古亚洲洋并未完全关闭,晚石炭世时仍然存在洋壳的俯冲消减事件。从区域上看,是北侧的贺根山洋盆向南俯冲的结果。     

Use of joint-growth directions and rock textures to infer thermal regimes during solidification of basaltic lava flows

Thermal contraction joints form in the upper and lower solidifying crusts of basaltic lava flows and grow toward the interior as the crusts thicken. Lava flows are thus divided by vertical joints that, by changes in joint spacing and form, define horizontal intraflow layers known as tiers. Entablatures are tiers with joint spacings less than about 40 cm, whereas colonnades have larger joint spacings. We use structural and petrographic methods to infer heat-transfer processes and to constrain environmental conditions that produce these contrasting tiers. Joint-surface morphology indicates overall joint-growth direction and thus identifies the level in a flow where the upper and lower crusts met. Rock texture provides information on relative cooling rates in the tiers of a flow. Lava flows without entablature have textures that develop by relatively slow cooling, and two joint sets that usually meet near their middles, which indicate mostly conductive cooling. Entablature-bearing flows have two main joint sets that meet well below their middles, and textures that indicate fast cooling of entablatures and slow cooling of colonnades. Entablatures always occur in the upper joint sets and sometimes alternate several times with colonnades. Solidification times of entablature-bearing flows, constrained by lower joint-set thicknesses, are much less than those predicted by a purely conductive cooling model. These results are best explained by a cooling model based on conductive heat transfer near a flow base and water-steam convection in the upper part of an entablature-bearing flow. Calculated solidification rates in the upper parts of such flows exceed that of the upper crust of Kilauea Iki lava lake, where water-steam convection is documented. Use of the solidification rates in an available model of water-steam convection yields permeability values that agree with measured values for fractured crystalline rock. We conclude, therefore, that an entablature forms when part of a flow cools very rapidly by water-steam convection. Flooding of the flow top by surface drainage most likely induces the convection. Colonnades form under conditions of slower cooling by conductive heat transfer in the absence of water.     

基于有限元法的土坯民房地震响应分析研究

基于有限元法研究了土坯民房的地震响应特征,提出了实施土坯民房震害防治的对策性建议。地震动由结构底部向上传播时,低频部分被墙体吸收,水平加速度逐渐增大,揭示了低破坏性地震动损伤土坯民房屋盖系统、高破坏性地震动损坏土坯民房承重构件,进而导致整体结构损毁的动力机制。砖柱（木柱）承重土坯民房的地震响应大于墙体承重土坯民房,后者最大剪应力集中在中间开间的横墙和纵墙的连接处,最大主应力集中在中间开间的横墙上;前者最大剪应力集中在横墙和柱的连接处,最大主应力集中在中间开间的柱体上部。由于2种结构类型土坯民房的薄弱环节有所不同,地震时的致灾原因亦存在差异。     

新疆库鲁克塔格新元古代花岗岩年龄和地球化学

本文报道了新疆塔里木北缘库鲁克塔格地区新元古代孤山岩体（或太阳岛岩体）的岩石学、锆石U-Pb年龄及地球化学组成。研究表明：该岩体主要由英云闪长岩、奥长花岗岩及正长花岗岩组成，结晶的时间为795 Ma。其地球化学特征表现为富Na、LREE、LILE及亏损HREE、HFSE，因此具有高的（La/Yb）N及Sr/Y比值，与现代的艾达克岩相似。然而该岩体具有低的Nd初始值及太古代的Nd模式年龄，因此推测其岩浆来自太古代基性下地壳的重熔。鉴于在库鲁克塔格地区发育有800 Ma左右的蛇绿岩，因此我们推测该岩体是碰撞造山引起的加厚的下地壳重熔的结果，代表了塔里木地块前寒武纪基底的最终形成。     

Characteristic mineralogy of the Zhutishi granite:Implication for petrogenesis of the late intrusive granite

Many granitic batholiths occur in the form of com-plexes, presented principally by a temporal-spacial association between two stages of intrusion, in the Nanling region. Compared with main intrusive gran-ites, late intrusive granites are characterized by fine- grained texture, Si- and Al-enriched composition, and small occurrence as stock or apophysis. On the basis of its rock chemistry (e.g., increasing aluminium saturation index) and geochemistry (e.g., Eu depletion, decreasing concentratio…     

Spheroidal weathering of granite porphyry with well‐developed columnar joints by oxidation,iron precipitation,and rindlet exfoliation

Spheroidal weathering, one of the important rock weathering styles, has been attributed to chemical weathering by the water from joint surfaces, and mechanical aspects of the weathering have not been well addressed. We made an investigation on spheroidal weathering of Miocene granite porphyry with well‐developed columnar joints and found that this spheroidal weathering proceeds through chemical processes and accompanying mechanical processes. The investigation of the textures, physical properties, mineralogy, and chemistry of the porphyry revealed the presence of a brown band on the surface margins of corestones, representing the oxidation of pyrite and chlorite, and the precipitation of iron hydroxides, and the consequent generation of micro‐cracks within the band. During weathering, oxidation progresses inwards from joints that surround the rindlets, including both high‐angle columnar and low‐angle planar joints, and causes rounding of the unweathered interior portion of the rock. Microscopic observations of the brown band embedded with fluorescent resin show that pores are first filled with iron hydroxides, and that micro‐cracks then form parallel to the oxidation front in the outer portion of the brown band. Iron hydroxide precipitation increases the P‐wave velocity in the brown band, while micro‐crack formation decreases the tensile strength of the rock. Where the brown band has thickened to ~6 cm, the micro‐cracks are connected to one another to create continuous cracks, which separate the rindlets from the corestone. Micro‐crack formation parallel to the corestone surface may be attributed to compressive stresses generated by small amounts of volumetric expansion due to the precipitation of iron hydroxides in the brown band. Earth surface is under oxidizing environments so that precipitation of iron hydroxides commonly occurs; the spheroidal weathering in this paper is a typical example of the combination of chemical and mechanical processes under such environments. Copyright © 2016 John Wiley & Sons, Ltd.     

Early Yanshanian post-orogenic granitoids in the Nanling region-- Petrological constraints and geodynamic settings

Early Yanshanian magmatic suites predominate absolutely in the Nanling granite belt.They consist mainly of monzogranite and K-feldspar granite.There occur associations of early Yanshanian A-type granitoids(176 Ma-178 Ma) and bimodal volcanic rocks(158 Ma-179 Ma) in southern Jiangxi and southwestern Fujian in the eastern sector of the granite belt and early Yanshanian basalts(177 Ma-178 Ma) in southern Hunan in the central sector of the belt.Both the acid end-member rhyolite in the bimodal volcanic rock association and A-type granitoids in southern Jiangxi have the geochemical characteristics of intraplate granitic rocks and the basic end-member basalt of the association is intraplate tholeiite,while the basaltic rocks in southern Hunan include not only intraplate tholeiite but also intraplate alkali basalt.Therefore the early Yanshanian magmatic suites in the Nanling region are undoubtedly typical post-orogenic rock associations.Post-orogenic suites mark the end of a post-collision or late orogenic event and the initiation of Pangaea break-up,indicating that a new orogenic Wilson cycle is about to start.Therefore it may be considered that the early Yanshanian geodynamic settings in the Nanling region should be related to post-orogenic continental break-up after the Indosinian orogeny and the break-up did not begin in the Cretaceous.     

Where fast weathering creates thin regolith and slow weathering creates thick regolith

Weathering disaggregates rock into regolith – the fractured or granular earth material that sustains life on the continental land surface. Here, we investigate what controls the depth of regolith formed on ridges of two rock compositions with similar initial porosities in Virginia (USA). A priori, we predicted that the regolith on diabase would be thicker than on granite because the dominant mineral (feldspar) in the diabase weathers faster than its granitic counterpart. However, weathering advanced 20× deeper into the granite than the diabase. The 20 × ‐thicker regolith is attributed mainly to connected micron‐sized pores, microfractures formed around oxidizing biotite at 20 m depth, and the lower iron (Fe) content in the felsic rock. Such porosity allows pervasive advection and deep oxidation in the granite. These observations may explain why regolith worldwide is thicker on felsic compared to mafic rock under similar conditions. To understand regolith formation will require better understanding of such deep oxidation reactions and how they impact fluid flow during weathering. Copyright © 2012 John Wiley & Sons, Ltd.     

Silurian A-type granitoids in the southern margin of the Tongbai-Dabieshan: Evidence from SHRIMP zircon geochronology and geochemistry

The Dabieshan Orogenic belt is well known for the exhumation of early Mesozoic ultrahigh-pressure (UHP) metamorphic rocks and Jurassic–Cretaceous emplacement of voluminous granitoids. However, the tectonic evolution in the orogen during the Paleozoic, especially its magmatic response to tectonism has not received much attention. As indicated by published data, the Dabieshan orogenic belt contains different records of Paleozoic magmatic-tectonic association in different tectonic units. Occ…     

Progressive failure of sheeted rock slopes: the 2009–2010 Rhombus Wall rock falls in Yosemite Valley,California, USA

Progressive rock‐fall failures in natural rock slopes are common in many environments, but often elude detailed quantitative documentation and analysis. Here we present high‐resolution photography, video, and laser scanning data that document spatial and temporal patterns of a 15‐month‐long sequence of at least 14 rock falls from the Rhombus Wall, a sheeted granitic cliff in Yosemite Valley, California. The rock‐fall sequence began on 26 August 2009 with a small failure at the tip of an overhanging rock slab. Several hours later, a series of five rock falls totaling 736 m³ progressed upward along a sheeting joint behind the overhanging slab. Over the next 3 weeks, audible cracking occurred on the Rhombus Wall, suggesting crack propagation, while visual monitoring revealed opening of a sheeting joint adjacent to the previous failure surface. On 14 September 2009 a 110 m³ slab detached along this sheeting joint. Additional rock falls between 30 August and 20 November 2010, totaling 187 m³, radiated outward from the initial failure area along cliff (sub)parallel sheeting joints. We suggest that these progressive failures might have been related to stress redistributions accompanying propagation of sheeting joints behind the cliff face. Mechanical analyses indicate that tensile stresses should occur perpendicular to the cliff face and open sheeting joints, and that sheeting joints should propagate parallel to a cliff face from areas of stress concentrations. The analyses also account for how sheeting joints can propagate to lengths many times greater than their depths behind cliff faces. We posit that as a region of failure spreads across a cliff face, stress concentrations along its margin will spread with it, promoting further crack propagation and rock falls. Published in 2012. This article is a US Government work and is in the public domain in the USA.     

秦岭造山带晚三叠世糜署岭岩体的岩石磁学及磁组构可靠性约束

近年来,针对秦岭造山带晚三叠世花岗岩体侵位机制的巨大争议,一些研究采用磁组构方法分析了岩体的内部组构特征及其与区域构造的关系,提出了具有重要意义的新认识.然而,目前这些研究均缺乏对岩体磁组构本质意义的分析,利用该方法约束岩体内部组构的可靠性并不十分清晰.针对这一问题,本文以秦岭造山带内具典型代表性意义的晚三叠世糜署岭花岗岩体为例,开展了该岩体的磁组构、岩石磁学、矿物形态组构和显微构造的综合研究.结果表明,糜署岭岩体的磁化率总体较低,属钛铁矿系列花岗岩.绝大部分样品的磁化率受控于顺磁性的黑云母等铁镁硅酸盐矿物,部分高磁化率样品包含了少量多畴磁铁矿等铁磁性组分的贡献,且随磁化率增大,铁磁性组分的贡献更为明显.样品的磁组构也主要是黑云母组构或由黑云母与磁铁矿的亚组构复合而成.由于样品中磁铁矿含量较低且与黑云母密切共生,磁组构与黑云母形态组构基本一致,因此,黑云母与磁铁矿的亚组构基本共轴.糜署岭岩体的磁组构本质上等同于黑云母组构,反映了黑云母等页硅酸盐矿物在岩体中的分布,可以有效的指示岩体的内部构造特征.宏观和显微构造观察还显示,糜署岭岩体的内部组构形成于岩浆侵位的晚期阶段,叠加了同岩浆期区域构造的关键信息,是从岩体构造角度开展区域构造演化的良好载体.