New physical characterization of the Fontana Lapilli basaltic Plinian eruption,Nicaragua

The Fontana Lapilli deposit was erupted in the late Pleistocene from a vent, or multiple vents, located near Masaya volcano (Nicaragua) and is the product of one of the largest basaltic Plinian eruptions studied so far. This eruption evolved from an initial sequence of fluctuating fountain-like events and moderately explosive pulses to a sustained Plinian episode depositing fall beds of highly vesicular basaltic-andesite scoria (SiO₂ > 53 wt%). Samples show unimodal grain size distribution and a moderate sorting that are uniform in time. The juvenile component predominates (> 96 wt%) and consists of vesicular clasts with both sub-angular and fluidal, elongated shapes. We obtain a maximum plume height of 32 km and an associated mass eruption rate of 1.4 × 10⁸ kg s⁻¹ for the Plinian phase. Estimates of erupted volume are strongly sensitive to the technique used for the calculation and to the distribution of field data. Our best estimate for the erupted volume of the majority of the climactic Plinian phase is between 2.9 and 3.8 km³ and was obtained by applying a power-law fitting technique with different integration limits. The estimated eruption duration varies between 4 and 6 h. Marine-core data confirm that the tephra thinning is better fitted by a power-law than by an exponential trend.     

The ~4-ka Rungwe Pumice (South-Western Tanzania): a wind-still Plinian eruption

The ~4-ka trachytic Rungwe Pumice (RP) deposit from Rungwe Volcano in South-Western Tanzania is the first Plinian-style deposit from an African volcano to be closely documented focusing on its physical characterization. The RP is a mostly massive fall deposit with an inversely graded base. Empirical models suggest a maximum eruption column height H _T of 30.5–35 km with an associated peak mass discharge rate of 2.8–4.8 × 10⁸ kg/s. Analytical calculations result in H _T values of 33 ± 4 km (inversion of TEPHRA2 model on grain size data) corresponding to mass discharge ranging from 2.3 to 6.0 × 10⁸ kg/s. Lake-core data allow extrapolation of the deposit thinning trend far beyond onland exposures. Empirical fitting of thickness data yields volume estimates between 3.2 and 5.8 km³ (corresponding to an erupted mass of 1.1–2.0 × 10¹² kg), whereas analytical derivation yields an erupted mass of 1.1 × 10¹² kg (inversion of TEPHRA2 model). Modelling and dispersal maps are consistent with nearly no-wind conditions during the eruption. The plume corner is estimated to have been ca. 11–12 km from the vent. After an opening phase with gradually increasing intensity, a high discharge rate was maintained throughout the eruption, without fountain collapse as is evidenced by a lack of pyroclastic density current deposits.     

Tephra fallout hazard assessment at the Campi Flegrei caldera (Italy)

Tephra fallout associated with renewal of volcanism at the Campi Flegrei caldera is a serious threat to the Neapolitan area. In order to assess the hazards related with tephra loading, we have considered three different eruption scenarios representative of past activity: a high-magnitude event similar to the 4.1 ka Agnano-Monte Spina eruption, a medium-magnitude event, similar to the ∼3.8 ka Astroni 6 eruption, and a low-magnitude event similar to the Averno 2 eruption. The fallout deposits were reconstructed using the HAZMAP computational model, which is based on a semi-analytical solution of the two-dimensional advection–diffusion–sedimentation equation for volcanic tephra. The input parameters into the model, such as total erupted mass, eruption column height, and bulk grain-size and components distribution, were obtained by best-fitting field data. We carried out tens of thousands simulations using a statistical set of wind profiles, obtained from NOAA re-analysis. Probability maps, relative to the considered scenarios, were constructed for several tephra loads, such as 200, 300 and 400 kg/m². These provide a hazard assessment for roof collapses due to tephra loading that can be used for risk mitigation plans in the area.     

The Pomici di Avellino eruption of Somma-Vesuvius (3.9 ka bp). Part I: stratigraphy, compositional variability and eruptive dynamics

The stratigraphic succession of the Pomici di Avellino Plinian eruption from Somma-Vesuvius has been studied through field and laboratory data in order to reconstruct the eruption dynamics. This eruption is particularly important in the Somma-Vesuvius eruptive history because (1) its vent was offset with respect to the present day Vesuvius cone; (2) it was characterised by a distinct opening phase; (3) breccia-like very proximal fall deposits are preserved close to the vent and (4) the pyroclastic density currents generated during the final phreatomagmatic phase are among the most widespread and voluminous in the entire history of the volcano. The stratigraphic succession is, here, divided into deposits of three main eruptive phases (opening, magmatic Plinian and phreatomagmatic), which contain five eruption units. Short-lived sustained columns occurred twice during the opening phase (H_t of 13 and 21.5 km, respectively) and dispersed thin fall deposits and small pyroclastic density currents onto the volcano slopes. The magmatic Plinian phase produced the main volume of erupted deposits, emplacing white and grey fall deposits which were dispersed to the northeast. Peak column heights reached 23 and 31 km during the withdrawal of the white and the grey magmas, respectively. Only one small pyroclastic density current was emplaced during the main Plinian phase. In contrast, the final phreatomagmatic phase was characterised by extensive generation of pyroclastic density currents, with fallout deposits very subordinate and limited to the volcano slopes. Assessed bulk erupted volumes are 21 × 10⁶ m³ for the opening phase, 1.3–1.5 km³ for the main Plinian phase and about 1 km³ for the final phreatomagmatic phase, yielding a total volume of about 2.5 km³. Pumice fragments are porphyritic with sanidine and clinopyroxene as the main mineral phases but also contain peculiar mineral phases like scapolite, nepheline and garnet. Bulk composition varies from phonolite (white magma) to tephri-phonolite (grey magma).     

The 512 AD eruption of Vesuvius: complex dynamics of a small scale subplinian event

We describe the products of the hitherto poorly known 512 AD eruption at Vesuvius, Italy. The deposit records a complex sequence of eruptive events, and it has been subdivided into eight main units, composed of stratified scoria lapilli or thin subordinate ash-rich layers. All the units formed by deposition from tephra fallout, pyroclastic density currents of limited extent being restricted to the initial stages of the eruption (U2). The main part of the deposit (U3 and U5) is characterized by a striking grain size alternation of fine to coarse lapilli, similar to that often described for mid-intensity, explosive eruptions. The erupted products have a phonotephritic composition, with progressively less evolved composition from the base to the top of the stratigraphic sequence. Based on different dispersal, sedimentological and textural features of the products, we identify five phases related to different eruptive styles: opening phase (U1, U2), subplinian phase (U3 to U5), pulsatory phreatomagmatic phase (U6), violent strombolian phase (U7) and final ash-dominated phase (U8). A DRE volume of 0.025 km³ has been calculated for the total fallout deposit. Most of the magma was erupted during the subplinian phase; lithic dispersal data indicate peak column heights of between 10 and 15 km, which correspond to a mass discharge rate (MDR) of 5 × 10⁶ kg s⁻¹. The lower intensity, violent strombolian phase coincided with the eruption of the least evolved magma; a peak column height of 6–9 km, corresponding to an MDR of 1 ×10 ⁶ kg s ⁻¹, is estimated from field data. Phreatomagmatic activity played a minor role in the eruption, only contributing to the ash-rich deposits of U1, U4, U6 and U8.     

Voluminous lava flows at Oldoinyo Lengai in 2006: chronology of events and insights into the shallow magmatic system

The largest natrocarbonatite lava flow eruption ever documented at Oldoinyo Lengai, NW Tanzania, occurred from March 25 to April 5, 2006, in two main phases. It was associated with hornito collapse, rapid extrusion of lava covering a third of the crater and emplacement of a 3-km long compound rubbly pahoehoe to blocky aa-like flow on the W flank. The eruption was followed by rapid enlargement of a pit crater. The erupted natrocarbonatite lava has high silica content (3% SiO₂). The eruption chronology is reconstructed from eyewitness and news media reports and Moderate Resolution Imaging Spectroradiometer (MODIS) satellite data, which provide the most reliable evidence to constrain the eruption’s onset and variations in activity. The eruption products were mapped in the field and the total erupted lava volume estimated at 9.2 ± 3.0 × 10⁵ m³. The event chronology and field evidence are consistent with vent construct instability causing magma mixing and rapid extrusion from shallow reservoirs. It provides new insights into and highlights the evolution of the shallow magmatic system at this unique natrocarbonatite volcano.     

Recent eruptions of Mount Adams, Washington Cascades, USA

 The postglacial eruption rate for the Mount Adams volcanic field is ∼0.1 km³/k.y., four to seven times smaller than the average rate for the past 520 k.y. Ten vents have been active since the last main deglaciation ∼15 ka. Seven high flank vents (at 2100–2600 m) and the central summit vent of the 3742-m stratocone produced varied andesites, and two peripheral vents (at 2100 and 1200 m) produced mildly alkalic basalt. Eruptive ages of most of these units are bracketed with respect to regional tephra layers from Mount Mazama and Mount St. Helens. The basaltic lavas and scoria cones north and south of Mount Adams and a 13-km-long andesitic lava flow on its east flank are of early postglacial age. The three most extensive andesitic lava-flow complexes were emplaced in the mid-Holocene (7–4 ka). Ages of three smaller Holocene andesite units are less well constrained. A phreatomagmatic ejecta cone and associated andesite lavas that together cap the summit may be of latest Pleistocene age, but a thin layer of mid-Holocene tephra appears to have erupted there as well. An alpine-meadow section on the southeast flank contains 24 locally derived Holocene andesitic ash layers intercalated with several silicic tephras from Mazama and St. Helens. Microprobe analyses of phenocrysts from the ash layers and postglacial lavas suggest a few correlations and refine some age constraints. Approximately 6 ka, a 0.07-km³ debris avalanche from the southwest face of Mount Adams generated a clay-rich debris flow that devastated >30 km² south of the volcano. A gravitationally metastable 2-to 3-km³ reservoir of hydrothermally altered fragmental andesite remains on the ice-capped summit and, towering 3 km above the surrounding lowlands, represents a greater hazard than an eruptive recurrence in the style of the last 15 k.y. Received: 24 June 1996 / Accepted: 6 December 1996     

Causes and consequences of bimodal grain-size distribution of tephra fall deposited during the August 2006 Tungurahua eruption (Ecuador)

The violent August 16–17, 2006 Tungurahua eruption in Ecuador witnessed the emplacement of numerous scoria flows and the deposition of a widespread tephra layer west of the volcano. We assess the size of the eruption by determining a bulk tephra volume in the range 42–57 × 10⁶ m³, which supports a Volcanic Explosivity Index 3 event, consistent with calculated column height of 16–18 km above the vent and making it the strongest eruptive phase since the volcano’s magmatic reactivation in 1999. Isopachs west of the volcano are sub-bilobate in shape, while sieve and laser diffraction grain-size analyses of tephra samples reveal strongly bimodal distributions. Based on a new grain-size deconvolution algorithm and extended sampling area, we propose here a mechanism to account for the bimodal grain-size distribution. The deconvolution procedure allows us to identify two particle subpopulations in the deposit with distinct characteristics that indicate dissimilar transport-depositional processes. The log-normal coarse-grained subpopulation is typical of particles transported downwind by the main volcanic plume. The positively skewed, fine-grained subpopulation in the tephra fall layer shares close similarities with the elutriated co-pyroclastic flow ash cloud layers preserved on top of the scoria flow deposits. The area with the higher fine particle content in the tephra layer coincides with the downwind prolongation of the pyroclastic flow deposits. These results indicate that the bimodal distribution of grain size in the Tungurahua fall deposit results from synchronous deposition of lapilli from the main plume and fine ash elutriated from scoria flows emplaced on the western flank of the volcano. Our study also reveals that inappropriate grain-size data processing may produce misleading determination of eruptive type.     

Mafic Plinian volcanism and ignimbrite emplacement at Tofua volcano,Tonga

Tofua Island is the largest emergent mafic volcano within the Tofua arc, Tonga, southwest Pacific. The volcano is dominated by a distinctive caldera averaging 4 km in diameter, containing a freshwater lake in the south and east. The latest paroxysmal (VEI 5–6) explosive volcanism includes two phases of activity, each emplacing a high-grade ignimbrite. The products are basaltic andesites with between 52 wt.% and 57 wt.% SiO₂. The first and largest eruption caused the inward collapse of a stratovolcano and produced the ‘Tofua’ ignimbrite and a sub-circular caldera located slightly northwest of the island’s centre. This ignimbrite was deposited in a radial fashion over the entire island, with associated Plinian fall deposits up to 0.5 m thick on islands >40 km away. Common sub-rounded and frequently cauliform scoria bombs throughout the ignimbrite attest to a small degree of marginal magma–water interaction. The common intense welding of the coarse-grained eruptive products, however, suggests that the majority of the erupted magma was hot, water-undersaturated and supplied at high rates with moderately low fragmentation efficiency and low levels of interaction with external water. We propose that the development of a water-saturated dacite body at shallow (<6 km) depth resulted in failure of the chamber roof to cause sudden evacuation of material, producing a Plinian eruption column. Following a brief period of quiescence, large-scale faulting in the southeast of the island produced a second explosive phase believed to result from recharge of a chemically distinct magma depleted in incompatible elements. This similar, but smaller eruption, emplaced the ‘Hokula’ Ignimbrite sheet in the northeast of the island. A maximum total volume of 8 km³ of juvenile material was erupted by these events. The main eruption column is estimated to have reached a height of ∼12 km, and to have produced a major atmospheric injection of gas, and tephra recorded in the widespread series of fall deposits found on coral islands 40–80 km to the east (in the direction of regional upper-tropospheric winds). Radiocarbon dating of charcoal below the Tofua ignimbrite and organic material below the related fall units imply this eruption sequence occurred post 1,000 years BP. We estimate an eruption magnitude of 2.24 × 10¹³ kg, sulphur release of 12 Tg and tentatively assign this eruption to the AD 1030 volcanic sulphate spike recorded in Antarctic ice sheet records.     

Nature and significance of small volume fall deposits at composite volcanoes: Insights from the October 14, 1974 Fuego eruption,Guatemala

The first of four successive pulses of the 1974 explosive eruption of Fuego volcano, Guatemala, produced a small volume (∼0.02 km³ DRE) basaltic sub-plinian tephra fall and flow deposit. Samples collected within 48 h after deposition over much of the dispersal area (7–80 km from the volcano) have been size analyzed down to 8 φ (4 μm). Tephra along the dispersal axis were all well-sorted (σ _φ = 0.25–1.00), and sorting increased whereas thickness and median grain size decreased systematically downwind. Skewness varied from slightly positive near the vent to slightly negative in distal regions and is consistent with decoupling between coarse ejecta falling off the rising eruption column and fine ash falling off the windblown volcanic cloud advecting at the final level of rise. Less dense, vesicular coarse particles form a log normal sub-population when separated from the smaller (Md_φ < 3φ or < 0.125 mm), denser shard and crystal sub-population. A unimodal, relatively coarse (Md_φ = 0.58φ or 0.7 mm σ _φ = 1.2) initial grain size population is estimated for the whole (fall and flow) deposit. Only a small part of the fine-grained, thin 1974 Fuego tephra deposit has survived erosion to the present day. The initial October 14 pulse, with an estimated column height of 15 km above sea level, was a primary cause of a detectable perturbation in the northern hemisphere stratospheric aerosol layer in late 1974 to early 1975. Such small, sulfur-rich, explosive eruptions may substantially contribute to the overall stratospheric sulfur budget, yet leave only transient deposits, which have little chance of survival even in the recent geologic record. The fraction of finest particles (Md_φ = 4–8φ or 4–63 μm) in the Fuego tephra makes up a separate but minor size mode in the size distribution of samples around the margin of the deposit. A previously undocumented bimodal–unimodal–bimodal change in grain size distribution across the dispersal axis at 20 km downwind from the vent is best accounted for as the result of fallout dispersal of ash from a higher subplinian column and a lower “co-pf” cloud resulting from pyroclastic flows. In addition, there is a degree of asymmetry in the documented grain-size fallout pattern which is attributed to vertically veering wind direction and changing windspeeds, especially across the tropopause. The distribution of fine particles (<8 μm diameter) in the tephra deposit is asymmetrical, mainly along the N edge, with a small enrichment along the S edge. This pattern has hazard significance.     

The dynamics and thermodynamics of large ash flows

 Ash flow deposits, containing up to 1000 km³ of material, have been produced by some of the largest volcanic eruptions known. Ash flows propagate several tens of kilometres from their source vents, produce extensive blankets of ash and are able to surmount topographic barriers hundreds of metres high. We present and test a new model of the motion of such flows as they propagate over a near horizontal surface from a collapsing fountain above a volcanic vent. The model predicts that for a given eruption rate, either a slow (10–100 m/s) and deep (1000–3000 m) subcritical flow or a fast (100–200 m/s) and shallow (500–1000 m) supercritical flow may develop. Subcritical ash flows propagate with a nearly constant volume flux, whereas supercritical flows entrain air and become progressively more voluminous. The run-out distance of such ash flows is controlled largely by the mass of air mixed into the collapsing fountain, the degree of fragmentation and the associated rate of loss of material into an underlying concentrated depositional system, and the mass eruption rate. However, in supercritical flows, the continued entrainment of air exerts a further important control on the flow evolution. Model predictions show that the run-out distance decreases with the mass of air entrained into the flow. Also, the mass of ash which may ascend from the flow into a buoyant coignimbrite cloud increases as more air is entrained into the flow. As a result, supercritical ash flows typically have shorter runout distances and more ash is elutriated into the associated coignimbrite eruption columns. We also show that one-dimensional, channellized ash flows typically propagate further than their radially spreading counterparts. As a Plinian eruption proceeds, the erupted mass flux often increases, leading to column collapse and the formation of pumiceous ash flows. Near the critical conditions for eruption column collapse, the flows are shed from high fountains which entrain large quantities of air per unit mass. Our model suggests that this will lead to relatively short ash flows with much of the erupted material being elutriated into the coignimbrite column. However, if the mass flux subseqently increases, then less air per unit mass is entrained into the collapsing fountain, and progressively larger flows, which propagate further from the vent, will develop. Our model is consistent with observations of a number of pyroclastic flow deposits, including the 1912 eruption of Katmai and the 1991 eruption of Pinatubo. The model suggests that many extensive flow sheets were emplaced from eruptions with mass fluxes of 10⁹–10¹⁰ kg/s over periods of 10³–10⁵ s, and that some indicators of flow "mobility" may need to be reinterpreted. Furthermore, in accordance with observations, the model predicts that the coignimbrite eruption columns produced from such ash flows rose between 20 and 40 km. Received: 25 August 1995 / Accepted: 3 April 1996     

The 1982 eruptions of El Chichon volcano,Mexico (2): Observations and numerical modelling of tephra-fall distribution

Tephra fallout from the A-1 (March 29, 0532 UT), B (April 4, 0135 UT), and C (April 4, 1122 UT) 1982 explosive eruptions of El Chichon produced three tephra fall deposits over southeastern Mexico. Bidirectional spreading of eruption plumes, as documented by satellite images, was due to a combination of tropospheric and stratospheric transport, with heaviest deposition of tephra from the ENE tropospheric lobes. Maximum column heights for the eruptions of 27, 32, and 29 km, respectively, have been determined by comparing maximum lithic-clast dispersal in the deposits with predicted lithic isopleths based on a theoretical model of pyroclast fallout from eruption columns. These column heights suggest peak mass eruption rates of 1.1 × 10⁸, 1.9 × 10⁸, and 1.3 × 10⁸ kg/s. Maximum column heights and mass eruption rates occured early in each event based on the normal size grading of the fall deposits. Sequential satellite images of plume transport and the production of a large stratospheric aerosol plume indicate that the eruption columns were sustained at stratospheric altitudes for a significant portion of their duration. New estimates of tephra fall volume based on integration of isopach area and thickness yield a total volume of 2.19 km³ (1.09 km³ DRE, dense rock equivalent) or roughly twice the amount of the deposit mapped on the ground. Up to one-half of the erupted mass was therefore deposited elsewhere as highly dispersed tephra.     

The caldera-forming eruption of Volcán Ceboruco, Mexico

3 of magma erupted, ∼95% of which was deposited as fall layers. During most of the deposition of P1, eruptive intensity (mass flux) was almost constant at 4–8×10⁷ kg s⁻¹, producing a Plinian column 25–30 km in height. Size grading at the top of P1 indicates, however, that mass flux waned dramatically, and possibly that there was a brief pause in the eruption. During the post-P1 phase of the eruption, a much smaller volume of magma erupted, although mass flux varied by more than an order of magnitude. We suggest that caldera collapse began at the end of the P1 phase of the eruption, because along with the large differences in mass flux behavior between P1 and post-P1 layers, there were also dramatic changes in lithic content (P1 contains ∼8% lithics; post-P1 layers contain 30–60%) and magma composition (P1 is 98% rhyodacite; post-P1 layers are 60–90% rhyodacite). However, the total volume of magma erupted during the Jala pumice event is close to that estimated for the caldera. These observations appear to conflict with models which envision that, after an eruption is initiated by overpressure in the magma chamber, caldera collapse begins when the reservoir becomes underpressurized as a result of the removal of magma. The conflict arises because firstly, the P1 layer makes up too large a proportion (∼75%) of the total volume erupted to correspond to an overpressurized phase, and secondly, the caldera volume exceeds the post-P1 volume of magma by at least a factor of three. The mismatches between model and observations could be reconciled if collapse began near the beginning of the eruption, but no record of such early collapse is evident in the tephra sequence. The apparent inability to place the Jala pumice eruptive sequence into existing models of caldera collapse, which were constructed to explain the formation of calderas much greater in volume than that at Ceboruco, may indicate that differences in caldera mechanics exist that depend on size or that a more general model for caldera formation is needed. Received: 18 November 1998 / Accepted: 23 October 1999     

A quantitative uncertainty assessment of eruptive parameters derived from tephra deposits: the example of two large eruptions of Cotopaxi volcano,Ecuador

Physical parameters of explosive eruptions are typically derived from tephra deposits. However, the characterization of a given eruption relies strongly on the quality of the dataset used, the strategy chosen to obtain and process field data and the particular model considered to derive eruptive parameters. As a result, eruptive parameters are typically affected by a certain level of uncertainty and should not be considered as absolute values. Unfortunately, such uncertainty is difficult to assess because it depends on several factors and propagates from field sampling to the application and interpretation of dispersal models. Characterization of explosive eruptions is made even more difficult when tephra deposits are poorly exposed and only medial data are available. In this paper, we present a quantitative assessment of the uncertainty associated with the characterization of tephra deposits generated by the two largest eruptions of the last 2,000 years of Cotopaxi volcano, Ecuador. In particular, we have investigated the effects of the determination of the maximum clast on the compilation of isopleth maps, and, therefore, on the characterization of plume height. We have also compared the results obtained from the application of different models for the determination of both plume height and erupted volume and for the eruption classification. Finally, we have investigated the uncertainty propagation into the calculation of mass eruption rate and eruption duration. We have found that for our case study, the determination of plume height from isopleth maps is more sensitive to the averaging techniques used to define the maximum clast than to the choice of dispersal models used (i.e. models of Carey and Sparks 1986; Pyle 1989) and that even the application of the same dispersal model can result in plume height discrepancies if different isopleth lines are used (i.e. model of Carey and Sparks 1986). However, the uncertainties associated with the determination of erupted mass, and, as a result, of the eruption duration, are larger than the uncertainties associated with the determination of plume height. Mass eruption rate is also associated with larger uncertainties than the determination of plume height because it is related to the fourth power of plume height. Eruption classification is also affected by data processing. In particular, uncertainties associated with the compilation of isopleth maps affect the eruption classification proposed by Pyle (1989), whereas the VEI classification is affected by the uncertainties resulting from the determination of erupted mass. Finally, we have found that analytical and empirical models should be used together for a more reliable characterization of explosive eruptions. In fact, explosive eruptions would be characterized better by a range of parameters instead of absolute values for erupted mass, plume height, mass eruption rate and eruption duration. A standardization of field sampling would also reduce the uncertainties associated with eruption characterization.     

Petrology of lavas from the Puu Oo eruption of Kilauea Volcano: III. The Kupaianaha episode (1986–1992)

 The Puu Oo eruption has been remarkable in the historical record of Kilauea Volcano for its duration (over 13 years), volume (>1 km³) and compositional variation (5.7–10 wt.% MgO). During the summer of 1986, the main vent for lava production moved 3 km down the east rift zone and the eruption style changed from episodic geyser-like fountaining at Puu Oo to virtually continuous, relatively quiescent effusion at the Kupaianaha vent. This paper examines this next chapter in the Puu Oo eruption, episodes 48 and 49, and presents new ICP-MS trace element and Pb-, Sr-, and Nd-isotope data for the entire eruption (1983–1994). Nearly aphyric to weakly olivine-phyric lavas were erupted during episodes 48 and 49. The variation in MgO content of Kupaianaha lavas erupted before 1990 correlates with changes in tilt at the summit of Kilauea, both of which probably were controlled by variations in Kilauea's magma supply rate. These lavas contain euhedral olivines which generally are in equilibrium with whole-rock compositions, although some of the more mafic lavas which erupted during 1990, a period of frequent pauses in the eruption, accumulated 2–4 vol.% olivine. The highest forsterite content of olivines (∼85%) in Kupaianaha lavas indicates that the parental magmas for these lavas had MgO contents of ∼10 wt.%, which equals the highest observed value for lavas during this eruption. The composition of the Puu Oo lavas has progressively changed during the eruption. Since early 1985 (episode 30), when mixing between an evolved rift zone magma and a more mafic summit reservoir-derived magma ended, the normalized (to 10 wt.% MgO) abundances of highly incompatible elements and CaO have systematically decreased with time, whereas ratios of these trace elements and Pb, Sr, and Nd isotopes, and the abundances of Y and Yb, have remained relatively unchanged. These results indicate that the Hawaiian plume source for Puu Oo magmas must be relatively homogeneous on a scale of 10–20 km³ (assuming 5–10% partial melting), and that localized melting within the plume has apparently progressively depleted its incompatible elements and clinopyroxene component as the eruption continued. The rate of variation of highly incompatible elements in Puu Oo lavas is much greater than that observed for Kilauea historical summit lavas (e.g., Ba/Y 0.09 a^–1 vs ∼0.03 a^–1). This rapid change indicates that Puu Oo magmas did not mix thoroughly with magma in the summit reservoir. Thus, except for variable amounts of olivine fractionation, the geochemical variation in these lavas is predominantly controlled by mantle processes. Received: 8 March 1996 / Accepted: 30 April 1996     

Reconstruction and analysis of sub-plinian tephra dispersal during the 1530 A.D. Soufrière (Guadeloupe) eruption: Implications for scenario definition and hazards assessment

The last magmatic eruption of Soufrière of Guadeloupe dated at 1530 A.D. (Soufrière eruption) is characterized by an onset with a partial flank-collapse and emplacement of a debris-avalanche that was followed by a sub-plinian VEI 2–3 explosive short-lived eruption (Phase-1) with a column that reached a height between 9 and 12 km producing about 3.9 × 10⁶ m³ DRE (16.3 × 10⁶ m³ bulk) of juvenile products. The column recurrently collapsed generating scoriaceous pyroclastic flows in radiating valleys up to a distance of 5–6 km with a maximum interpolated bulk deposit volume of 11.7 × 10⁶ m³ (5 × 10⁶ m³ DRE). We have used HAZMAP, a numerical simple first-order model of tephra dispersal [Macedonio, G., Costa, A., Longo, A., 2005. A computer model for volcanic ash fallout and assessment of subsequent hazard. Comput. Geosci. 31, 837–845] to reconstruct to a first approximation the potential dispersal of tephra and associated tephra mass loadings generated by the sub-plinian Phase 1 of the 1530 A.D. eruption. We have tested our model on a deterministic average dry season wind profile that best-fits the available data as well as on a set of randomly selected wind profiles over a 5 year interval that allows the elaboration of probabilistic maps for the exceedance of specific tephra mass load thresholds. Results show that in the hypothesis of a future 1530 A.D. scenario, populated areas to a distance of 3–4 km west–southwest of the vent could be subjected to a static load pressure between 2 and 10 kPa in case of wet tephra, susceptible to cause variable degrees of roof damage. Our results provide volcanological input parameters for scenario and event-tree definition, for assessing volcanic risks and evaluating their impact in case of a future sub-plinian eruption which could affect up to 70 000 people in southern Basse-Terre island and the region. They also provide a framework to aid decision-making concerning land management and development. A sub-plinian eruption is the most likely magmatic scenario in case of a future eruption of this volcano which has shown, since 1992, increasing signs of low-energy seismic, thermal, and acid degassing unrest without significant deformation.     

Pre-emergent construction of a lacustrine basaltic volcano,Pahvant Butte,Utah (USA)

 The subaqueous phases of an eruption initiated approximately 85 m beneath the surface of Pleistocene Lake Bonneville produced a broad mound of tephra. A variety of distinctive lithofacies allows reconstruction of the eruptive and depositional processes active prior to emergence of the volcano above lake level. At the base of the volcano and very near inferred vent sites are fines-poor, well-bedded, broadly scoured beds of sideromelane tephra having local very low-angle cross-stratification (M1 lithofacies). These beds grade upward into lithofacies M3, which shows progressively better developed dunes and cross-stratification upsection to its uppermost exposure approximately 10 m below syneruptive lake level. Both lithofacies were emplaced largely by traction from relatively dilute sediment gravity flows generated during eruption. Intercalated lithofacies are weakly bedded tuff and breccia (M2), and nearly structureless units with coarse basal layers above strongly erosional contacts (M4). The former combines products of deposition from direct fall and moderate concentration sediment gravity flows, and the latter from progressively aggrading high-concentration sediment gravity flows. Early in the eruption subaqueous tephra jetting from phreatomagmatic explosions discontinuously fed inhomogeneous, unsteady, dilute density currents which produced the M1 lithofacies near the vent. Dunes and crossbeds which are better developed upward in M3 resulted from interaction between sediment gravity flows and surface waves triggered as the explosion-generated pressure waves and eruption jets impinged upon and occasionally breached the surface. Intermingling of (a) tephra emplaced after brief transport by tephra jets within a gaseous milieu and (b) laterally flowing tephra formed lithofacies M2 along vent margins during parts of the eruption in which episodes of continuous uprush produced localized water-exclusion zones above a vent. M4 comprises mass flow deposits formed by disruption and remobilization of mound tephra. Intermittent, explosive magma–water interactions occurred from the outset of the Pahvant eruption, with condensation, entrainment of water and lateral flow marking the transformation from eruptive to "sedimentary" processes leading to deposition of the mound lithofacies. Received: 10 October 1995 / Accepted: 18 April 1996     

Erratum to Compositional variations and magma mixing in the 1991 eruptions of Hudson volcano,Chile

The August 1991 eruptions of Hudson volcano produced ~2.7 km³ (dense rock equivalent, DRE) of basaltic to trachyandesitic pyroclastic deposits, making it one of the largest historical eruptions in South America. Phase 1 of the eruption (P1, April 8) involved both lava flows and a phreatomagmatic eruption from a fissure located in the NW corner of the caldera. The paroxysmal phase (P2) began several days later (April 12) with a Plinian-style eruption from a different vent 4 km to the south-southeast. Tephra from the 1991 eruption ranges in composition from basalt (phase 1) to trachyandesite (phase 2), with a distinct gap between the two erupted phases from 54–60 wt% SiO₂. A trend of decreasing SiO₂ is evident from the earliest part of the phase 2 eruption (unit A, 63–65 wt% SiO₂) to the end (unit D, 60–63 wt% SiO₂). Melt inclusion data and textures suggest that mixing occurred in magmas from both eruptive phases. The basaltic and trachyandesitic magmas can be genetically related through both magma mixing and fractional crystallization processes. A combination of observed phase assemblages, inferred water content, crystallinity, and geothermometry estimates suggest pre-eruptive storage of the phase 2 trachyandesite at pressures between ~50–100 megapascal (MPa) at 972 ± 26°C under water-saturated conditions (log fO₂ –10.33 (±0.2)). It is proposed that rising P1 basaltic magma intersected the lower part of the P2 magma storage region between 2 and 3 km depth. Subsequent mixing between the two magmas preferentially hybridized the lower part of the chamber. Basaltic magma continued advancing towards the surface as a dyke to eventually be erupted in the northwestern part of the Hudson caldera. The presence of tachylite in the P1 products suggests that some of the magma was stalled close to the surface (<0.5 km) prior to eruption. Seismicity related to magma movement and the P1 eruption, combined with chamber overpressure associated with basalt injection, may have created a pathway to the surface for the trachyandesite magma and subsequent P2 eruption at a different vent 4 km to the south-southeast. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Constraining tephra dispersion and deposition from three subplinian explosions in 2011 at Shinmoedake volcano,Kyushu, Japan

Constraining physical parameters of tephra dispersion and deposition from explosive volcanic eruptions is a significant challenge, because of both the complexity of the relationship between tephra distribution and distance from the vent and the difficulties associated with direct and comprehensive real-time observations. Three andesitic subplinian explosions in January 2011 at Shinmoedake volcano, Japan, are used as a case study to validate selected empirical and theoretical models using observations and field data. Tephra volumes are estimated using relationships between dispersal area and tephra thickness or mass/area. A new cubic B-spline interpolation method is also examined. Magma discharge rate is estimated using theoretical plume models incorporating the effect of wind. Results are consistent with observed plume heights (6.4–7.3 km above the vent) and eruption durations. Estimated tephra volumes were 15–34?×?10⁶ m³ for explosions on the afternoon of 26 January and morning of 27 January, and 5.0–7.6?×?10⁶ m³ for the afternoon of 27 January; magma discharge rates were in the range 1–2?×?10⁶ kg/s for all three explosions. Clast dispersal models estimated plume height at 7.1?±?1 km above the vent for each explosion. The three subplinian explosions occurred with approximately 12-h reposes and had similar mass discharge rates and plume heights but decreasing erupted magma volumes and durations.     

Eruptive style of the young high-Mg basaltic-andesite Pelagatos scoria cone,southeast of México City

The eruption of the Pelagatos scoria cone in the Sierra Chichinautzin monogenetic field near the southern suburbs of Mexico City occurred less than 14,000 years ago. The eruption initiated at a fissure with an effusive phase that formed a 7-km-long lava flow, and continued with a phase of alternating and/or simultaneous explosive and effusive activity that built a 50-m-high scoria cone on the western end of the fissure and formed a compound lava flow-field near the vent. The eruption ended with the emplacement of a short lava flow that breached the cone and was accompanied by weak explosions at the crater. Products consist of a microlite-rich high-Mg basaltic andesite. Samples were analyzed to determine the magma’s initial properties as well as the effects of degassing-induced crystallization on eruptive style. Although distal ash fallout deposits from this eruption are not preserved, a recent quarry exposes a large section of the scoria cone. Detailed study of exposed layers allows us to elucidate the mode of cone-building activity. Petrological and textural data, combined with models calibrated by experimental work and melt-inclusion analyses of similar magmas elsewhere, indicate that the magma was initially hot (>1,200°C), gas-rich (up to 5 wt.% H₂O), crystal-poor (~10 vol.% Fo₉₀ olivine phenocrysts) and thus poorly viscous (40–80 Pa s). During the early phase, low magma ascent velocity at the fissure vent allowed low-viscosity magma to degas and crystallize during ascent, producing lava flows with elevated crystal contents at T < 1,100°C, and blocky surfaces. Later, the closure of the fissure by cooling dikes focused the magma flow at a narrow section of the fissure. This led to an increased magma ascent velocity. Rapid and shallow degassing (<3 km deep) triggered ~40 vol.% microlite crystallization. Limited times for gas-escape and higher magma viscosity (6 × 10⁵–4 × 10⁶ Pa s) drove strong explosions of highly (60–80 vol.%) and finely vesicular magma. Coarse clasts broke on landing, which implies brittle behavior due to complete solidification. This requires sufficient time to cool and in turn implies ejection heights of over 1 km, which is much higher than “normal” Strombolian activity. Hence, magma viscosity significantly impacts eruption style at monogenetic volcanoes because it affects the kinetics of shallow degassing. The long-lasting eruptions of Jorullo and Paricutin, which produced similar magmas in western México, were more explosive. This can be related to higher magma fluxes and total erupted volumes. Implications of this study are important because basaltic andesites are commonly erupted to form monogenetic scoria cones of the Trans-Mexican Volcanic Belt.