Slope units-based flow susceptibility model: using validation tests to select controlling factors

A susceptibility map for an area, which is representative in terms of both geologic setting and slope instability phenomena of large sectors of the Sicilian Apennines, was produced using slope units and a multiparametric univariate model. The study area, extending for approximately 90 km², was partitioned into 774 slope units, whose expected landslide occurrence was estimated by averaging seven susceptibility values, determined for the selected controlling factors: lithology, mean slope gradient, stream power index at the foot, mean topographic wetness index and profile curvature, slope unit length, and altitude range. Each of the recognized 490 landslides was represented by its centroid point. On the basis of conditional analysis, the susceptibility function here adopted is the density of landslides, computed for each class. Univariate susceptibility models were prepared for each of the controlling factors, and their predictive performance was estimated by prediction rate curves and effectiveness ratio applied to the susceptibility classes. This procedure allowed us to discriminate between effective and non-effective factors, so that only the former was subsequently combined in a multiparametric model, which was used to produce the final susceptibility map. The validation of this map latter enabled us to verify the reliability and predictive performance of the model. Slope unit altitude range and length, lithology and, subordinately, stream power index at the foot of the slope unit demonstrated to be the main controlling factors of landslides, while mean slope gradient, profile curvature, and topographic wetness index gave unsatisfactory results.     

数字地质图的特点及制图时应注意的几个问题

随着GIS技术引进地质领域,数字地质图全面取代了传统地质图。它克服了模拟地质图的缺欠,可快捷地实现投影变换、随意确定比例尺、任意选择显示范围、选取内容及内容的表达方式等,是今后地质成果的重要表现形式。     

城市地质图的特点编图原则方法

论述了城市地质图的主要特点、编图原则和方法, 其主要内容概括如下: (1)编制城市地质图的重要意义首先在于为不断完善和适应城市建设和发展的需要, 更好地使地质工作为城市建设总体规划和政府决策服务, 同时为具体工程设计和施工提供基础资料。其次为合理地开发利用城市土地资源、保护城市地质环境提供科学依据。(2)城市地质图是一个具有以专业地质规划目标与工程地质要求、城市发展总体效益评估为内容的系列图件, 是一个分别具有适应于地质专业人员、城市规划设计工程师和政府决策管理官员需要的多功能特点的系统性图件。(3)城市地质图编制原则, 第一在于客观性; 第二为评价性; 第三为预测性; 第四为实用性。前三项是前提和基础, 后者为目的。力求做到内容准确、明晰可读、易懂, 紧紧围绕城市规划设计和政府决策对地质技术的要求进行。(4)城市地质图包容了基础地质图类、分析评价图类、效益决策评估类三个等级的功能各异的图件, 在制图方法和程式上体现了图件的等级内容性质用途的统一、技术性与管理决策的统一。     

Preliminary seismic hazard maps of Slovenia

The preparation of the preliminary seismic hazard maps of the territory of Slovenia has been based on an expansion of the basic approach laid out by Cornell in 1968. Three seismic source models were prepared. Two of them are based mainly on the earthquake catalogue using the Poissonian probability model. A map of seismic energy release and a map of earthquake epicenter density are used to delineate seismic sources in these models. The geometry of the third model which is based on a rough estimate of seismotectonic setting is taken from the probabilistic seismic hazard analysis of a nuclear power plant in Slovenia. Published ground motion attenuation models based on strong motion records of recent strong earthquakes in Italy are used. Test maps for variable and uniform b-values are presented. The computer program, Seisrisk III, developed by the U.S. Geological Survey is used.     

Resource estimation from historical data: Mercury, a test case

A simple technique based on historical records of tonnage and grade of ore produced provides a means for calculating how much of a mineral product will be available in the future at various average grades. Estimates made on this basis are independent of geologic considerations or changing economic and political factors, although they are based on mining history, which was largely determined by these factors. The relatively minor element, mercury, was used for the test case reported here, but the method has been found applicable to forecasts of resources for other mineral products. Mercury resources available in ore in which the average grade is as low as 0.1% are estimated to be 53 ×10 ⁶ kg (1.5 ×10 ⁶ flasks) for the United States and 1551 ×10 ⁶ kg (45 ×10 ⁶ flasks) for the world; this amount is more than adequate to meet predicted demand to the year 2000. The expectable price of mercury in 1978 dollars at this 0.1% grade is projected to be $58.75 per kg ($2,025 per flask), but at a 10% annual inflation rate, it would be more than $12,000 per flask. To satisfy just the projected U.S. demand for mercury by 2000, the price is calculated to be $48.96 per kg ($1,688 per flask) in 1978 dollars at an average annual grade of 0.12%.     

Elevated lateral stress in unlithified sediment, Midcontinent, United States—geotechnical and geophysical indicators for a tectonic origin

Indirect and direct geotechnical measurements revealed the presence of high lateral earth pressure (K_o) in shallow, unlithified sediment at a site in the northernmost Mississippi embayment region of the central United States. Results from pile-load and pressuremeter tests showed maximum K_o values greater than 10; however, the complex geologic environment of the Midcontinent made defining an origin for the anomalous K_o based solely on these measurements equivocal. Although in situ sediment characteristics indicated that indirect tectonic or nontectonic geologic mechanisms that include transient overburden loads (e.g., fluvial deposition/erosion, glacial advance/retreat) and dynamic shear loads (e.g., earthquakes) were not the dominant cause, they were unable to provide indicators for a direct tectonic generation. Localized stresses induced anthropogenically by the geotechnical field tests were also considered, but ruled out as the primary origin. A high-resolution shear-wave (SH) reflection image of geologic structure in the immediate vicinity of the test site revealed compression-style neotectonism, and suggested that the elevated stress was a tectonic manifestation. Post-Paleozoic reflectors exhibit a Tertiary (?) structural inversion, as evidenced by post-Cretaceous fault displacement and pronounced positive folds in the hanging wall of the interpreted faults. The latest stratigraphic extent of the stress effects (i.e., all measurements were in the Late Cretaceous to Tertiary McNairy Formation), as well as the relationship of stress orientation with the orientation of local structure and regional stress, remain unknown. These are the subjects of ongoing studies.     

Adaptive Conditioning of Multiple-Point Statistical Facies Simulation to Flow Data with Probability Maps

Multiple-point statistics (MPS) provides a flexible grid-based approach for simulating complex geologic patterns that contain high-order statistical information represented by a conceptual prior geologic model known as a training image (TI). While MPS is quite powerful for describing complex geologic facies connectivity, conditioning the simulation results on flow measurements that have a nonlinear and complex relation with the facies distribution is quite challenging. Here, an adaptive flow-conditioning method is proposed that uses a flow-data feedback mechanism to simulate facies models from a prior TI. The adaptive conditioning is implemented as a stochastic optimization algorithm that involves an initial exploration stage to find the promising regions of the search space, followed by a more focused search of the identified regions in the second stage. To guide the search strategy, a facies probability map that summarizes the common features of the accepted models in previous iterations is constructed to provide conditioning information about facies occurrence in each grid block. The constructed facies probability map is then incorporated as soft data into the single normal equation simulation (snesim) algorithm to generate a new candidate solution for the next iteration. As the optimization iterations progress, the initial facies probability map is gradually updated using the most recently accepted iterate. This conditioning process can be interpreted as a stochastic optimization algorithm with memory where the new models are proposed based on the history of the successful past iterations. The application of this adaptive conditioning approach is extended to the case where multiple training images are proposed as alternative geologic scenarios. The advantages and limitations of the proposed adaptive conditioning scheme are discussed and numerical experiments from fluvial channel formations are used to compare its performance with non-adaptive conditioning techniques.     

利用水系沉积物地球化学数据判别浅覆盖区岩性与构造--欧氏距离法

针对浅覆盖区地质调查困难，缺少可对比已知资料的实际问题，这里以大兴安岭阿龙山地区1：250000水系沉积物资料为例，给出了浅覆盖区岩性和构造识别的一种方法。该方法依据水系沉积物对原岩的继承性，以不同岩性所对应的典型土壤为已知样品，采用欧氏距离作为分类指标，将研究区划分为不同的岩性类。得到的区域地球化学分类图反映了一定的岩性分布及构造特点，为区域地质调查提供了线索。     

1:250万中华人民共和国数字地质图空间数据库

中华人民共和国1∶250万数字地质图空间数据库,于2000年立项,2001年完成,历时2年。该数据库除主数据库外,还有地理底图数据库及地理内容属性库,地质内容属性库、色标库、线型库、花纹库、符号库、图例库等构成。具有可按地质内容、行政区、任意空间范围及地理内容进行检索和自动输出成图、自动绘制地质体符号、自动形成图例等功能。1∶250万比例尺数字地质图空间数据库的建成弥补了该领域的空白。对显示和提高我国大陆地质研究程度,总结和体现我国地质的总体特征,为经济建设、国土资源管理、地质调查研究等方面提供基础地质资料,具有重要意义。     

A model for the assessment of aquifer contamination potential based on regional geologic framework

The texture and three-dimensional framework of geologic materials should be considered in assessments of groundwater's vulnerability to contamination because geology controls the movement of contaminants and groundwater and influences groundwater quality. Contaminants are introduced into, transmitted through, and stored by geologic materials. We present a model that identifies aquifers and ranks sequences of geologic materials by their relative potential for transmitting water and contaminants from land surface. With this basis, the model can be used to assess the potential for contamination of aquifers by surface activities such as landfitling of wastes or application of agricultural chemicals. A regional map of aquifer contamination potential can be generated from the model; it retains the geologic map information intact and available for reinterpretation or other uses.The model was developed using broad, regional map information and is intended to be a general tool for assessing the regional vulnerability of aquifers to contamination. It is not intended for local, site-specific use, but for prioritizing local areas where contamination potential and/or land-use history warrant more detailed assessment or monitoring. Because it provides a regional view of contamination potential, regional patterns or trends of map units should be evaluated, rather than using the map information literally to assess local areas. Methods of applying this model and contamination potential map to groundwater protection and management are currently being studied; research includes an attempt to statistically validate the model with water-quality data, and to identify natural groupings of the ranked contamination potential map units.     

P–T-deformation-Fe3+/Fe2+ mapping at the thin section scale and comparison with XANES mapping: application to a garnet-bearing metapelite from the Sambagawa metamorphic belt (Japan)

Quantitative X‐ray maps of composition from a chlorite, K‐white mica, albite, quartz and garnet bearing thin section from a Sambagawa blueschist facies metapelite were combined with a multi‐equilibrium calculation method to calculate a P–T‐Fe³⁺/Fe²⁺‐deformation map at the millimetre scale. The studied sample was chosen because elongated chlorite crystallization tails (pressure shadows) rimmed by phengite are present, which is an appropriate assemblage for the quantification of the P–T evolution. Chlorite temperature and Fe³⁺ content maps were calculated by successive iterations for each pixel analysis of Fe³⁺ until convergence of the four chlorite‐quartz‐H₂O equilibria that can be written using the Fe‐ and Mg‐amesite, clinchlore, daphnite and sudoite chlorite end‐members. The calculated map of Fe²⁺/Fe³⁺ in chlorite is in good qualitative agreement with the in situ mapping of this ratio using XANES (X‐ray absorption near edge structure) techniques. The temperature map indicates that high temperature chlorite zones with low Fe³⁺ contents alternate with lower temperature zones and higher Fe³⁺ contents in the crystallization tail. Late fractures perpendicular to the elongation axis of the tail are filled by very low temperature chlorite (<250 °C) showing Fe³⁺/Fe_total up to 0.4. Groups of chlorite and mica pixels were then identified based on compositional and structural criteria, and a P–T‐deformation map was calculated using representative analyses of these groups. The calculated P–T‐deformation map suggests that in contrast to chlorite, the composition of most mica did not change significantly during exhumation. Mica reequilibrated in late EW shear bands only. EW shearing was already active at 0.1 GPa, 500 °C, which corresponds to the peak temperature (and probably pressure) conditions, at reduced redox conditions. The intensity of deformation probably decreased with decrease in temperature to ～350–400 °C. At this temperature, a second main deformation event corresponding to a further EW stretching occurred and was still active below 250 °C and more oxidizing conditions. These results indicate that the scale at which P–T data can be obtained is now close to the scale of observation of structural geologists. A close link between deformation and mineral reaction is therefore possible at the microscopic scale, which provides information about the relationship between deformation and mineral reactivity, the modalities of deformation with time and the P–T conditions at which it occurred.     

地测空间信息系统功能在地质勘探报告中的应用简介

地测空间信息系统(CGIS)在地质勘探部门、矿山地测部门实现了自动化处理地测图形,即钻孔柱状图、煤层结构综合柱状、煤岩层对比图、封孔结构图、地质实测剖面图、地质剖面图及各类等值线图等图件,并可自动形成各类报告、生产报表,改变以往手工绘制图件,可节省大量的人力、物力、财力。     

Sulfur K-edge XANES study of local electronic structure in ternary monosulfide solid solution [(Fe, Co, Ni)0.923S]

 Synchrotron radiation S K-edge XANES spectra and unit-cell parameters are used to investigate the local electronic structure of non-stoichiometric binary and ternary Fe-Co-Ni monosulfide solid solution (mss; M_0.923S, M = Fe, Co, Ni) quenched from 800 °C and low pressure. The prominent absorption edge feature of the XANES spectra represents transition of S 1s core level electrons to unoccupied S 3p σ* antibonding orbitals hybridized with empty metal 3d(e_g) orbitals. There is a progressive increase in area of the edge peak from Fe_0.923S to Ni_0.923S and Co_0.923S, which correlates with progressive decrease in c and a parameters for the NiAs-type subcell and increase in metallic character, and reflects increase in the number and availability of empty e_g ^β orbitals and covalence of metal-S bonds. More generally, the area of the edge peak exhibits an inverse linear correlation with a, c and unit-cell volume of binary and ternary mss. This inverse linear correlation is attributed to progressive increase in covalence and M-S-M bonding interaction in the c-axis direction, through metal-S [M 3d(e_g) - S 3p (or 3d)] π bonding. However, the area of the edge peak does not correlate very well with the average number of 3d electrons per metal atom in these solid solutions, showing that the absorption of synchrotron radiation reflects the local electronic structure of individual absorber atoms (i.e. the SM₆ cluster), and is not a group (crystal energy band) effect. Received: 21 March 2000 / Accepted: 14 July 2000     

利用GEOSIS软件平台建立三维地质可视模型——以典型岩溶流域湖南洛塔为例

探讨了洛塔典型岩溶流域在缺乏钻孔资料的情况下,利用系列地质剖面、地质图、DEM等现有资料建立三维地质模型的建模方法及模型的应用。其中地质剖面数据的获取采用了计算机自动提取地形高程、地层界线、地下河位置等信息制图,精确快速。三维建模过程使用Geo SIS三维地质建模软件平台,以超体元实体模型、断层数学模型、褶皱几何模型等进行建模,模型形象逼真。建好的三维模型可以进行任意方向、角度的切割;进行地下漫游、放大、三维观察地层与断层之间的关系;进行揭层三维显示及单层三维显示; 进行任意形状的开挖显示。从建模的角度考虑,该方法对仅有地形图、水文地质图和极少量钻孔资料的情况下建立三维地质模型,具有普遍推广的意义。      

全国地质灾害趋势预测及预测图编制

区域地质灾害预测是地质灾害研究的难题。本文运用基于地理信息系统的风险评价方法对这一问题进行了探讨。将全国剖分为２７００个单元，对地质灾害进行现状评价，并与已数字化的地质灾害图件进行单要素叠加，编制了全国地质现状等值线图，在现状评价基础上，对地质灾害进行趋势预测，将降雨条件、区域地震活动、区域地壳稳定程度、区域岩组条件和人类工程活动等作为区域地质灾害演变的因素，运用模糊综合评判模型进行综合评判，编制了１：６００万中国地质灾害趋势预测图。     

Sulfur isotope measurement of sulfate and sulfide by high-resolution MC-ICP-MS

We have developed a technique for the accurate and precise determination of ³⁴S/³²S isotope ratios (δ³⁴S) in sulfur-bearing minerals using solution and laser ablation multiple-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). We have examined and determined rigorous corrections for analytical difficulties such as instrumental mass bias, unresolved isobaric interferences, blanks, and laser ablation- and matrix-induced isotopic fractionation. Use of high resolution sector-field mass spectrometry removes major isobaric interferences from O₂⁺. Standard-sample bracketing is used to correct for the instrumental mass bias of unknown samples. Background on sulfur masses arising from memory effects and residual oxygen-tailing are typically minor (< 0.2‰, within analytical error), and are mathematically removed by on-peak zero subtraction and by bracketing of samples with standards determined at the same signal intensity (within 20%). Matrix effects are significant (up to 0.7‰) for matrix compositions relevant to many natural sulfur-bearing minerals. For solution analysis, sulfur isotope compositions are best determined using purified (matrix-clean) sulfur standards and sample solutions using the chemical purification protocol we present. For in situ analysis, where the complex matrix cannot be removed prior to analysis, appropriately matrix-matching standards and samples removes matrix artifacts and yields sulfur isotope ratios consistent with conventional techniques using matrix-clean analytes. Our method enables solid samples to be calibrated against aqueous standards; a consideration that is important when certified, isotopically-homogeneous and appropriately matrix-matched solid standards do not exist. Further, bulk and in situ analyses can be performed interchangeably in a single analytical session because the instrumental setup is identical for both. We validated the robustness of our analytical method through multiple isotope analyses of a range of reference materials and have compared these with isotope ratios determined using independent techniques. Long-term reproducibility of S isotope compositions is typically 0.20‰ and 0.45‰ (2σ) for solution and laser analysis, respectively. Our method affords the opportunity to make accurate and relatively precise S isotope measurement for a wide range of sulfur-bearing materials, and is particularly appropriate for geologic samples with complex matrix and for which high-resolution in situ analysis is critical.     

Application of a RS- and GIS-based semi-quantitative approach (analytical hierarchy process – AHP) in landslide hazard risk assessment of the Shivkhola Watershed,Darjiling Himalaya

The present study deals with the application of analytical hierarchy process to prepare landslide hazard risk map of the Shivkhola Watershed applying remote sensing and geographic information system (GIS). Firstly, to integrate all the required thematic data layers and to prepare landslide susceptibility map, prioritised class rating value and prioritised factor rating value were obtained by developing couple-comparing matrix with a reasonable consistency and with the help of MATLAB software after Saaty. Three important risk factor/element maps, that is, weighted land use/land cover map, road contributing area map and settlement density map, were developed and their weighted linear combination was performed to prepare landslide risk exposure map. Then by integrating landslide susceptibility map and landslide risk exposure map, a classification was incorporated on ARC GIS Platform to prepare landslide hazard risk map. To evaluate the validity of the landslide hazard risk map, probability/chance of landslide hazard risk event has been estimated by means of frequency ratio between landslide hazard risk area (%) and number of risk events (%) for each landslide hazard risk class. Finally, an accuracy assessment was also made on ERDAS Imagine (8.5) which depicts that the classification accuracy of the landslide hazard risk map was 92.89 with overall Kappa statistics of 0.8929.     

地质约束条件下的地质体智能综合方法研究

地质体综合是地质图编制工作的重中之重,因其处理涉及内容多、 业务逻辑复杂、 重复工作量大,是影响编图工作推进的主要因素.为了能够实现地质体的高效综合,文章提出了一种以地质约束条件(专家知识)为核心、 以制图综合为空间图形合并手段的新型地质体智能综合方法,设计并实现了围绕地质专家知识(如地质年代、 地层名称等)规则映射开...     

Solenites (Czekanowskiales) from the Late Mesozoic Jehol Biota of Southeastern Jilin, China and its Paleoclimatic Implications

Situated at the easternmost area of the Late Mesozoic Jehol Biota, China, abundant fossils, including invertebrates, vertebrates and plants, were collected from the Early Cretaceous Yingzuilazi Formation of the Baishan Basin, southeastern Jilin. The faunal remains from this formation distinctly belong to the Early Cretaceous Lycoptera–Ephemeropsis–Eosestheria assemblage of the Jehol Biota. Based on the gross leaf morphology and epidermal structures, two new species and one indeterminate species of genus Solenites(Czekanowskiales), S. baishanensis sp. nov., S. gracilis sp. nov. and S. sp. are described in this paper. This is the first fossil plant of Czekanowskiales reported from this new fossil locality of the easternmost area of the Late Mesozoic Jehol Biota, China. The new discovery contributes to improve our knowledge for understanding of leaf morphology, epidermal characters and diversity of this genus during the Early Cretaceous time, and extends geologic and geographic distribution of Solenites in northern China and Eurasia. Along with consideration of associated plant and faunal assemblages and sedimentology, we suggest that the regional climate was warm and moderately humid with seasonal temperature and precipitation variations in warm–temperate zone during the Early Cretaceous.