Metallogeny and tectonic development of the Tasman Fold Belt System in Queensland

The northern part of the Tasman Fold Belt System in Queensland comprises three segments, the Thomson, Hodgkinson- Broken River, and New England Fold Belts. The evolution of each fold belt can be traced through pre-cratonic (orogenic), transitional, and cratonic stages. The different timing of these stages within each fold belt indicates differing tectonic histories, although connecting links can be recognised between them from Late Devonian time onward. In general, orogenesis became younger from west to east towards the present continental margin. The most recent folding, confined to the New England Fold Belt, was of Early to mid-Cretaceous age. It is considered that this eastward migration of orogenic activity may reflect progressive continental accretion, although the total amount of accretion since the inception of the Tasman Fold Belt System in Cambrian time is uncertain.The Thomson Fold Belt is largely concealed beneath late Palaeozoic and Mesozoic intracratonic basin sediments. In addition, the age of the more highly deformed and metamorphosed rocks exposed in the northeast is unknown, being either Precambrian or early Palaeozoic. Therefore, the tectonic evolution of this fold belt must remain very speculative. In its early stages (Precambrian or early Palaeozoic), the Thomson Fold Belt was probably a rifted continental margin adjacent to the Early to Middle Proterozoic craton to the west and north. The presence of calc-alkaline volcanics of Late Cambrian Early Ordovician and Early-Middle Devonian age suggests that the fold belt evolved to a convergent Pacific-type continental margin. The tectonic setting of the pre-cratonic (orogenic) stage of the Hodgkinson—Broken River Fold Belt is also uncertain. Most of this fold belt consists of strongly deformed, flysch-type sediments of Silurian-Devonian age. Forearc, back-arc and rifted margin settings have all been proposed for these deposits. The transitional stage of the Hodgkinson—Broken River Fold Belt was characterised by eruption of extensive silicic continental volcanics, mainly ignimbrites, and intrusion of comagmatic granitoids in Late Carboniferous Early Permian time. An Andean-type continental margin model, with calc-alkaline volcanics erupted above a west-dipping subduction zone, has been suggested for this period. The tectonic history of the New England Fold Belt is believed to be relatively well understood. It was the site of extensive and repeated eruption of calc-alkaline volcanics from Late Silurian to Early Cretaceous time. The oldest rocks may have formed in a volcanic island arc. From the Late Devonian, the fold belt was a convergent continental margin above a west-dipping subduction zone. For Late Devonian- Early Carboniferous time, parallel belts representing continental margin volcanic arc, forearc basin, and subduction complex can be recognised.A great variety of mineral deposits, ranging in age from Late Cambrian-Early Ordovician and possibly even Precambrian to Early Cretaceous, is present in the exposed rocks of the Tasman Fold Belt System in Queensland. Volcanogenic massive sulphides and slate belt-type gold-bearing quartz veins are the most important deposits formed in the pre-cratonic (orogenic) stage of all three fold belts. The voicanogenic massive sulphides include classic Kuroko-type orebodies associated with silicic volcanics, such as those at Thalanga (Late Cambrian-Early Ordovician. Thomson Fold Belt) and at Mount Chalmers (Early Permian New England Fold Belt), and Kieslager or Besshi-type deposits related to submarine mafic volcanics, such as Peak Downs (Precambrian or early Palaeozoic, Thomson Fold Belt) and Dianne. OK and Mount Molloy (Silurian—Devonian, Hodgkinson Broken River Fold Belt). The major gold—copper orebody at Mount Morgan (Middle Devonian, New England Fold Belt), is considered to be of volcanic or subvolcanic origin, but is not a typical volcanogenic massive sulphide.The most numerous ore deposits are associated with calc-alkaline volcanics and granitoid intrusives of the transitional tectonic stage of the three fold belts, particularly the Late Carboniferous Early Perman of the Hodgkinson—Broken River Fold Belt and the Late Permian—Middle Triassic of the southeast Queensland part of the New England Fold Belt. In general, these deposits are small but rich. They include tin, tungsten, molybdenum and bismuth in granites and adjacent metasediments, base metals in contact meta somatic skarns, gold in volcanic breccia pipes, gold-bearing quartz veins within granitoid intrusives and in volcanic contact rocks, and low-grade disseminated porphyry-type copper and molybdenum deposits. The porphyry-type deposits occur in distinct belts related to intrusives of different ages: Devonian (Thomson Fold Belt), Late Carboniferous—Early Permian (Hodgkinson—Broken River Fold Belt). Late Permian Middle Triassic (southeast Queensland part of the New England Fold Belt), and Early Cretaceous (northern New England Fold Belt). All are too low grade to be of economic importance at present.Tertiary deep weathering events were responsible for the formation of lateritic nickel deposits on ultramafics and surficial manganese concentrations from disseminated mineralisation in cherts and jaspers.     

The eastern part of the Tasman Orogenic Zone

The eastern part of the Tasman Orogenic Zone (or Fold Belt System) comprises the Hodgkinson—Broken River Orogen (or Fold Belt) in the north and the New England Orogen (or Fold Belt) in the centre and south. The two orogens are separated by the northern part of the Thomson Orogen.The Hodgkinson—Broken River Orogen contains Ordovician to Early Carboniferous sequences of volcaniclastic flysch with subordinate shelf carbonate facies sediments. Two provinces are recognized, the Hodgkinson Province in the north and the Broken River Province in the south. Unlike the New England Orogen where no Precambrian is known, rocks of the Hodgkinson—Broken River Orogen were deposited immediately east of and in part on, Precambrian crust.The evolution of the New England Orogen spans the time range Silurian to Triassic. The orogen is orientated at an acute angle to the mainly older Thomson and Lachlan Orogens to the west, but the relationships between all three orogens are obscured by the Permian—Triassic Bowen and Sydney Basins and younger Mesozoic cover. Three provinces are recognized, the Yarrol Province in the north, the Gympie Province in the east and the New England Province in the south.Both the Yarrol and New England Provinces are divisible into two zones, western and eastern, that are now separated by major Alpine-type ultramafic belts. The western zones developed at least in part on early Palaeozoic continental crust. They comprise Late Silurian to Early Permian volcanic-arc deposits (both island-arc and terrestrial Andean types) and volcaniclastic sediments laid down on unstable continental shelves. The eastern zones probably developed on oceanic crust and comprise pelagic sediments, thick flysch sequences and ophiolite suite rocks of Silurian (or older?) to Early Permian age. The Gympie Province comprises Permian to Early Triassic volcanics and shallow marine and minor paralic sediments which are now separated from the Yarrol Province by a discontinuous serpentinite belt.In morphotectonic terms, a Pacific-type continental margin with a three-part arrangement of calcalkaline volcanic arc in the west, unstable volcaniclastic continental shelf in the centre and continental slope and oceanic basin in the east, appears to have existed in the New England Orogen and probably in the Hodgkinson—Broken River Orogen as well, through much of mid- to late Palaeozoic time. However, the easternmost part of the New England Orogen, the Gympie Province, does not fit this pattern since it lies east of deepwater flysch deposits of the Yarrol Province.     

Isotopic constraints on crustal architecture and Permo‐Triassic tectonics in New Guinea: Possible links with eastern Australia

New U–Pb zircon ages and Sr–Nd isotopic data for Triassic igneous and metamorphic rocks from northern New Guinea help constrain models of the evolution of Australia's northern and eastern margin. These data provide further evidence for an Early to Late Triassic volcanic arc in northern New Guinea, interpreted to have been part of a continuous magmatic belt along the Gondwana margin, through South America, Antarctica, New Zealand, the New England Fold Belt, New Guinea and into southeast Asia. The Early to Late Triassic volcanic arc in northern New Guinea intrudes high‐grade metamorphic rocks probably resulting from Late Permian to Early Triassic (ca 260–240 Ma) orogenesis, as recorded in the New England Fold Belt. Late Triassic magmatism in New Guinea (ca 220 Ma) is related to coeval extension and rifting as a precursor to Jurassic breakup of the Gondwana margin. In general, mantle‐like Sr–Nd isotopic compositions of mafic Palaeozoic to Tertiary granitoids appear to rule out the presence of a North Australian‐type Proterozoic basement under the New Guinea Mobile Belt. Parts of northern New Guinea may have a continental or transitional basement whereas adjacent areas are underlain by oceanic crust. It is proposed that the post‐breakup margin comprised promontories of extended Proterozoic‐Palaeozoic continental crust separated by embayments of oceanic crust, analogous to Australia's North West Shelf. Inferred movement to the south of an accretionary prism through the Triassic is consistent with subduction to the south‐southwest beneath northeast Australia generating arc‐related magmatism in New Guinea and the New England Fold Belt.     

Palaeozoic collision between the North and South China blocks,Triassic intracontinental tectonics,and the problem of the ultrahigh-pressure metamorphism

The Qinling–Dabie Belt represents the boundary between the North and South China blocks (NCB, SCB, respectively), where ultrahigh-pressure (UHP) rocks are widespread. A structural study in eastern Qinling and zircon LA ICPMS dating of the migmatites that form the core of the Central Qinling Unit allows us to argue that continental collision occurred in the Silurian, before 400 Ma. In the Late Palaeozoic, from the Devonian to the Permian, the northern margin of SCB experienced a continental rifting. From the Late Permian to Middle Triassic, northward continental subduction of SCB is responsible for the development of a high-pressure metamorphism. The age of the UHP metamorphism remains unsettled yet. A two-time genesis, Early Palaeozoic and Early Triassic, is often preferred, but a single Palaeozoic age followed by a Triassic resetting cannot be ruled out.     

Paleozoic terranes of eastern Australia and the drift history of Gondwana

Critical assessment of Paleozoic paleomagnetic results from Australia shows that paleopoles from locations on the main craton and in the various terranes of the Tasman Fold Belt of eastern Australia follow the same path since 400 Ma for the Lachlan and Thomson superterranes, but not until 250 Ma or younger for the New England superterrane. Most of the paleopoles from the Tasman Fold Belt are derived from the Lolworth-Ravenswood terrane of the Thomson superterrane and the Molong-Monaro terrane of the Lachlan superterrane. Consideration of the paleomagnetic data and geological constraints suggests that these terranes were amalgamated with cratonic Australia by the late Early Devonian. The Lolworth-Ravenswood terrane is interpreted to have undergone a 90° clockwise rotation between 425 and 380 Ma. Although the Tamworth terrane of the western New England superterrane is thought to have amalgamated with the Lachlan superterrane by the Late Carboniferous, geological syntheses suggest that movements between these regions may have persisted until the Middle Triassic. This view is supported by the available paleomagnetic data. With these constraints, an apparent polar wander path for Gondwana during the Paleozoic has been constructed after review of the Gondwana paleomagnetic data. The drift history of Gondwana with respect to Laurentia and Baltica during the Paleozoic is shown in a series of paleogeographic maps.     

U–Pb zircon geochronology of Late Devonian to Early Carboniferous extension‐related silicic volcanism in the northern New England Fold Belt

Laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) analysis of zircons confirm a Late Devonian to Early Carboniferous age (ca 360–350 Ma) for silicic volcanic rocks of the Campwyn Volcanics and Yarrol terrane of the northern New England Fold Belt (Queensland). These rocks are coeval with silicic volcanism recorded elsewhere in the fold belt at this time (Connors Arch, Drummond Basin). The new U–Pb zircon ages, in combination with those from previous studies, show that silicic magmatism was both widespread across the northern New England Fold Belt (>250 000 km² and ≥500 km inboard of plate margin) and protracted, occurring over a period of ～15 million years. Zircon inheritance is commonplace in the Late Devonian — Early Carboniferous volcanics, reflecting anatectic melting and considerable reworking of continental crust. Inherited zircon components range from ca 370 to ca 2050 Ma, with Middle Devonian (385–370 Ma) zircons being common to almost all dated units. Precambrian zircon components record either Precambrian crystalline crust or sedimentary accumulations that were present above or within the zone of magma formation. This contrasts with a lack of significant zircon inheritance in younger Permo‐Carboniferous igneous rocks intruded through, and emplaced on top of, the Devonian‐Carboniferous successions. The inheritance data and location of these volcanic rocks at the eastern margins of the northern New England Fold Belt, coupled with Sr–Nd, Pb isotopic data and depleted mantle model ages for Late Palaeozoic and Mesozoic magmatism, imply that Precambrian mafic and felsic crustal materials (potentially as old as 2050 Ma), or at the very least Lower Palaeozoic rocks derived from the reworking of Precambrian rocks, comprise basement to the eastern parts of the fold belt. This crustal basement architecture may be a relict from the Late Proterozoic breakup of the Rodinian supercontinent.     

The relationship of structures across the Lambian unconformity near Taralga,New South Wales

The structures across the Lambian Unconformity near Taralga show evidence of two, and possibly three, significant episodes of folding. The first, Early to Middle Silurian folding is poorly defined, but may be responsible for initial dips that are reflected in the more complex deformation patterns in the Late Ordovician than in the overlying younger rocks. The second, mid‐Devonian folding produced upright folds trending 10° west of north, and the last, latest Devonian to Early Carboniferous folding produced the meridional Cookbundoon Synclinorium and the regional cleavage. No cleavage was associated with the first two episodes of folding in the area studied. The angular discordance across the Lambian Unconformity caused by mid‐Devonian folding is much greater than in the northeastern Lachlan Fold Belt, and reflects the increasing intensity of mid‐Devonian folding southward. The tight, slightly overturned profile of the Cookbundoon Synclinorium reflects an intensity of latest Devonian to Early Carboniferous folding similar to that found in the northeastern Lachlan Fold Belt, but the intensity of this folding decreases further south.     

Lachlan Fold Belt in New South Wales

The Lachlan Fold Belt is a Middle Palaeozoic orogenic belt in which terminal tectogenesis occurred during the Early Carboniferous (Kanimblan Orogeny). This fold belt went through a complicated tectonic history and developed from the stratotectonic Lachlan Marginal Mobile Zone (or geosyncline of other authors). The Lachlan Fold Belt can be divided into structural zones which are characterized by varying tectonic styles. Zones of intensive deformation alternate with less deformed zones.The formation of the Lachlan Fold Belt may be viewed in terms of a series of tensional and compressional deformational events with the major compressional or tensional stress maintaining an approximate east—west orientation (relative to the grain of the fold belt) for the life of the Lachlan Marginal Mobile Zone.     

东澳大利亚南悉尼盆地二叠纪的地层、沉积环境与盆地演化

晚石炭世末期-三叠纪东澳大利亚的鲍恩-冈尼达-悉尼（Bowen- Gunnedah-Sydney）盆地系是位于拉克伦（Lachlan）褶皱带和新英格兰（New England）褶皱带之间的一个长条形的构造盆地。从北部的冈尼达（Gunnedah）到南部的巴特曼斯（Batemans）湾，悉尼盆地是鲍恩-冈尼达-悉尼盆地系南端的一个次级盆地。悉尼盆地的二叠系包括河流、三角洲、滨浅海沉积岩和火山岩地层。南悉尼盆地的西南部二叠系不整合覆盖于变形变质的拉克伦（Lachlan）褶皱带之上。二叠系由下部的塔拉特郎（Tallaterang）群、中部的肖尔黑文群（Shoalhaven Group）和上部的伊勒瓦拉煤系（Illawarra Coal Measures）组成。从晚石炭世末到中三叠世悉尼盆地经历了弧后扩张到典型的前陆盆地的不同阶段：弧后扩张阶段、被动热沉降阶段和挤压挠曲负载阶段。     

Evidence from U–Pb zircon and 40Ar/39Ar muscovite detrital mineral ages in metasandstones for movement of the Torlesse suspect terrane around the eastern margin of Gondwanaland

New U–Pb detrital zircon ages from Triassic metasandstones of the Torlesse Terrane in New Zealand are compared with ⁴⁰Ar/³⁹Ar muscovite data and together, reveal four main source components: (i) major, Triassic–Permian (210–270 Myr old) and (ii) minor, Permian–Carboniferous (280–350 Myr old) granitoids (recorded in zircon and muscovite data); (iii) minor, early middle Palaeozoic, metamorphic rocks, recorded mainly by muscovite, 420–460 Myr old, and (iv) minor, Late Precambrian–Cambrian igneous and metamorphic complexes, 480–570 Myr old, recorded by zircon only. There are also Proterozoic zircon ages with no clear grouping (580–1270 Myr). The relative absence of late Palaeozoic (350–420 Myr old) components excludes granitoid terranes in the southern Lachlan Fold Belt (Australia) and its continuation into North Victoria Land (East Antarctica) and Marie Byrd Land (West Antarctica) as a potential source for the Torlesse. The age data are compatible with derivation from granitoid terranes of the northern New England Orogen (and hinterland) in NE Australia. This confirms that the Torlesse Terrane of New Zealand is a suspect terrane, that probably originated at the NE Australian, Permian–Triassic, Gondwanaland margin and then (200–120 Ma) moved 2500 km southwards to its present New Zealand position by the Late Cretaceous (90 Ma). This sense of movement is analogous to that suggested for Palaeozoic Mesozoic terranes at the North American Pacific margin.     

广西钦防海槽迁移与沉积-构造转换面

广西的钦州－防城－带，素以钦防海槽称之，系指加里东期构造运动后，扬子与华夏陆块间的“残留海”。其两侧为古隆所夹持，西为大明山古隆起，东为云开大山古隆起，其间划分为四个构造单元，由东向西依次为：博白坳陷，六万大山隆起，钦州坳陷和十万大山坳陷。现构造形迹的排列，反馈防海槽在早古生代至中生代间深海盆或浅海深水盆地在构造和沉积上有自东向西迁移的特点。晚古生代盆地迁移过程至少有八个沉积－构造转换面可记录盆地的构造演化：第1转换面为早奥陶世与晚寒武世间的沉积界面；第2转换面为早志留世与晚奥陶世间的沉积界面；第3转换面为早泥盆世早期与晚志留世间的海侵上超面；第4转换面为中泥盆世的海侵上超面；第5转换面为中二叠世与晚二叠世间的沉积界面；第6转换面为早三叠世的海侵面；第7转换面为中晚三叠世与早三叠世间的沉积界面；第8转换面为早侏罗世与晚三叠世间的沉积界面。前两个界面为盆山转换面，与华南加里东构造运动过程相耦合，为挤压的构造背景；第3界面为水下间断面，下泥盆统与上志留统为不连续沉积，在构造上应是挤压机制下的破裂不整合，也是加里东期构造运动的响应；第4界为海西期的海侵上超面，与盆地走滑拉张同步；第5界面则反馈于印支期造山的初始阶段，第6界面为中生代盆地迁移转换面；第7界面为印支期造山过程的盆地转换面；第8界面为燕山期造山造盆转换面。其转换面性质的转化，代表钦防海槽可能是个复杂大陆边缘前陆盆地演化史。     

Plate-driven extension and convergence along the East Gondwana active margin: Late Silurian–Middle Devonian tectonics of the Lachlan Fold Belt,southeastern Australia

The Lachlan Fold Belt of southeastern Australia developed along the Panthalassan margin of East Gondwana. Major silicic igneous activity and active tectonics with extensional, strike-slip and contractional deformation have been related to a continental backarc setting with a convergent margin to the east. In the Early Silurian (Benambran Orogeny), tectonic development was controlled by one or more subduction zones involved in collision and accretion of the Ordovician Macquarie Arc. Thermal instability in the Late Silurian to Middle Devonian interval was promoted by the presence of one or more shallow subducted slabs in the upper mantle and resulted in widespread silicic igneous activity. Extension dominated the Late Silurian in New South Wales and parts of eastern Victoria and led to formation of several sedimentary basins. Alternating episodes of contraction and extension, along with dispersed strike-slip faulting particularly in eastern Victoria, occurred in the Early Devonian culminating in the Middle Devonian contractional Tabberabberan Orogeny. Contractional deformation in modern systems, such as the central Andes, is driven by advance of the overriding plate, with highest strain developed at locations distant from plate edges. In the Ordovician to Early Devonian, it is inferred that East Gondwana was advancing towards Panthalassa. Extensional activity in the Lachlan backarc, although minor in comparison with backarc basins in the western Pacific Ocean, was driven by limited but continuous rollback of the subduction hinge. Alternation of contraction and extension reflects the delicate balance between plate motions with rollback being overtaken by advance of the upper plate intermittently in the Early to Middle Devonian resulting in contractional deformation in an otherwise dominantly extensional regime. A modern system that shows comparable behaviour is East Asia where rollback is considered responsible for widespread sedimentary basin development and basin inversion reflects advance of blocks driven by compression related to the Indian collision.     

The Bentong–Raub Suture Zone

It is proposed that the Bentong–Raub Suture Zone represents a segment of the main Devonian to Middle Triassic Palaeo-Tethys ocean, and forms the boundary between the Gondwana-derived Sibumasu and Indochina terranes. Palaeo-Tethyan oceanic ribbon-bedded cherts preserved in the suture zone range in age from Middle Devonian to Middle Permian, and mélange includes chert and limestone clasts that range in age from Lower Carboniferous to Lower Permian. This indicates that the Palaeo-Tethys opened in the Devonian, when Indochina and other Chinese blocks separated from Gondwana, and closed in the Late Triassic (Peninsular Malaysia segment). The suture zone is the result of northwards subduction of the Palaeo-Tethys ocean beneath Indochina in the Late Palaeozoic and the Triassic collision of the Sibumasu terrane with, and the underthrusting of, Indochina. Tectonostratigraphic, palaeobiogeographic and palaeomagnetic data indicate that the Sibumasu Terrane separated from Gondwana in the late Sakmarian, and then drifted rapidly northwards during the Permian–Triassic. During the Permian subduction phase, the East Malaya volcano-plutonic arc, with I-Type granitoids and intermediate to acidic volcanism, was developed on the margin of Indochina. The main structural discontinuity in Peninsular Malaysia occurs between Palaeozoic and Triassic rocks, and orogenic deformation appears to have been initiated in the Upper Permian to Lower Triassic, when Sibumasu began to collide with Indochina. During the Early to Middle Triassic, A-Type subduction and crustal thickening generated the Main Range syn- to post-orogenic granites, which were emplaced in the Late Triassic–Early Jurassic. A foredeep basin developed on the depressed margin of Sibumasu in front of the uplifted accretionary complex in which the Semanggol “Formation” rocks accumulated. The suture zone is covered by a latest Triassic, Jurassic and Cretaceous, mainly continental, red bed overlap sequence.     

Geochemical character and tectonic significance of Early Devonian keratophyres in the New England Fold Belt,eastern Australia

Extrusive and high level intrusive Early Devonian keratophyres are the oldest in situ igneous rocks in the Tamworth Block of the New England Fold Belt of eastern Australia. They show extensive evidence of degradation, including the destruction of magmatic phases, the growth of low grade metamorphic minerals, and changes in composition involving the dilution of elemental abundances in response to silica addition. Relations between the less mobile minor and trace elements, and limited data on clinopyroxene compositions, lead to the conclusion that these Early Devonian volcanic rocks are mostly calc‐alkaline volcanic arc andesites with minor dacite. These rocks unconformably overlie a sequence of Early Palaeozoic forearc basin deposits, indicating that the Early Devonian marks a period of readjustment of tectonic elements within the New England Fold Belt, associated with a marked east‐directed stepping out of the magmatic arc. Generation of the keratophyres in a subduction zone environment limits the position of the trench to 100 km east of the Peel Fault System.     

Silurian to mid-Devonian basin development of the Melbourne Zone, Lachlan Fold Belt, southeastern Australia

The Melbourne Zone comprises Early Ordovician to Early Devonian marine turbidites, which pass conformably upward into a mid-Devonian fluviatile succession. There are four pulses of Silurian to mid-Devonian deep-marine sandstone-dominated sedimentation: Early Silurian (late Llandovery), Late Silurian (Ludlow), earliest Devonian (Lochkovian) and late Early Devonian (Emsian). Two dispersal patterns have been defined using more than 1100 palaeocurrent measurements, mainly from sole marks and cross-laminations in graded beds, together with sandstone compositions. The older pattern, of Silurian to earliest Devonian age, contains the lowest three sandstone pulses. Palaeocurrents and provenance define a wedge of southwesterly derived sediment, of largely cratonic provenance, thinning eastward. This older dispersal pattern is part of an Early Ordovician to earliest Devonian east-facing passive continental margin succession. Palaeocurrents and provenance in the Emsian sandstone pulse comprise three patterns: (1) west- to southwesterly directed palaeocurrents associated with fine- to coarse-grained, locally conglomeratic, lithic sandstones containing a high proportion of volcanic detritus; (2) east- to northeasterly directed palaeocurrents associated with fine- to medium-grained quartz-lithic sandstones; (3) north- to northwesterly and south- to southeasterly directed palaeocurrents associated with fine- to medium-grained sandstones of variable lithic composition. The palaeocurrent and provenance pattern defines a NNW-elongate basin with a tectonically active eastern margin, and is similar to the coeval Mathinna basin of northeastern Tasmania. Both basins are part of the same system of wrench basins, which developed along the western side of the Wagga–Omeo Metamorphic Belt during the earliest Devonian to Middle Devonian. The change in tectonic setting in the earliest Devonian appears to have occurred during an interval of significant dextral translation of the eastern Lachlan Fold Belt towards the SSE along the Governor and associated fault zones.     

The Berridale Wrench fault: A major structure in the Snowy Mountains of New South Wales

One of the most significant, but poorly understood, tectonic events in the east Lachlan Fold Belt is that which caused the shift from mafic, mantle‐derived calc‐alkaline/shoshonitic volcanism in the Late Ordovician to silicic (S‐type) plutonism and volcanism in the late Early Silurian. We suggest that this chemical/isotopic shift required major changes in crustal architecture, but not tectonic setting, and simply involved ongoing subduction‐related magmatism following burial of the pre‐existing, active intraoceanic arc by overthrusting Ordovician sediments during Late Ordovician — Early Silurian (pre‐Benambran) deformation, associated with regional northeast‐southwest shortening. A review of ‘type’ Benambran deformation from the type area (central Lachlan Fold Belt) shows that it is constrained to a north‐northwest‐trending belt at ca 430 Ma (late Early Silurian), associated with high‐grade metamorphism and S‐type granite generation. Similar features were associated with ca 430 Ma deformation in east Lachlan Fold Belt, highlighted by the Cooma Complex, and formed within a separate north‐trending belt that included the S‐type Kosciuszko, Murrumbidgee, Young and Wyangala Batholiths. As Ordovician turbidites were partially melted at ca 430 Ma, they must have been buried already to ～20 km before the ‘type’ Benambran deformation. We suggest that this burial occurred during earlier northeast‐southwest shortening associated with regional oblique folds and thrusts, loosely referred to previously as latitudinal or east‐west structures. This event also caused the earliest Silurian uplift in the central Lachlan Fold Belt (Benambran highlands), which pre‐dated the ‘type’ Benambran deformation and is constrained as latest Ordovician — earliest Silurian (ca 450–440 Ma) in age. The south‐ to southwest‐verging, earliest Silurian folds and thrusts in the Tabberabbera Zone are considered to be associated with these early oblique structures, although similar deformation in that zone probably continued into the Devonian. We term these ‘pre’‐ and ‘type’‐Benambran events as ‘early’ and ‘late’ for historical reasons, although we do not consider that they are necessarily related. Heat‐flow modelling suggests that burial of ‘average’ Ordovician turbidites during early Benambran deformation at 450–440 Ma, to form a 30 km‐thick crustal pile, cannot provide sufficient heat to induce mid‐crustal melting at ca 430 Ma by internal heat generation alone. An external, mantle heat source is required, best illustrated by the mafic ca 430 Ma, Micalong Swamp Igneous Complex in the S‐type Young Batholith. Modern heat‐flow constraints also indicate that the lower crust cannot be felsic and, along with petrological evidence, appears to preclude older continental ‘basement terranes’ as sources for the S‐type granites. Restriction of the S‐type batholiths into two discrete, oblique, linear belts in the central and east Lachlan Fold Belt supports a model of separate magmatic arc/subduction zone complexes, consistent with the existence of adjacent, structurally imbricated turbidite zones with opposite tectonic vergence, inferred by other workers to be independent accretionary prisms. Arc magmas associated with this ‘double convergent’ subduction system in the east Lachlan Fold Belt were heavily contaminated by Ordovician sediment, recently buried during the early Benambran deformation, causing the shift from mafic to silicic (S‐type) magmatism. In contrast, the central Lachlan Fold Belt magmatic arc, represented by the Wagga‐Omeo Zone, only began in the Early Silurian in response to subduction associated with the early Benambran northeast‐southwest shortening. The model requires that the S‐type and subsequent I‐type (Late Silurian — Devonian) granites of the Lachlan Fold Belt were associated with ongoing, subduction‐related tectonic activity.     

Late Palaeozoic arc flank and fore‐arc basin sequence of the New England fold belt in the stanage bay region,central Queensland

Devonian and Carboniferous (Yarrol terrane) rocks, Early Permian strata, and Permian‐(?)Triassic plutons outcrop in the Stanage Bay region of the northern New England Fold Belt. The Early‐(?)Middle Devonian Mt Holly Formation consists mainly of coarse volcaniclastic rocks of intermediate‐silicic provenance, and mafic, intermediate and silicic volcanics. Limestone is abundant in the Duke Island, along with a significant component of quartz sandstone on Hunter Island. Most Carboniferous rocks can be placed in two units, the late Tournaisian‐Namurian Campwyn Volcanics, composed of coarse volcaniclastic sedimentary rocks, silicic ash flow tuff and widespread oolitic limestone, and the conformably overlying Neerkol Formation dominated by volcaniclastic sandstone and siltstone with uncommon pebble conglomerate and scattered silicic ash fall tuff. Strata of uncertain stratigraphic affinity are mapped as ‘undifferentiated Carboniferous’. The Early Permian Youlambie Conglomerate unconformably overlies Carboniferous rocks. It consists of mudstone, sandstone and conglomerate, the last containing clasts of Carboniferous sedimentary rocks, diverse volcanics and rare granitic rocks. Intrusive bodies include the altered and variably strained Tynemouth Diorite of possible Devonian age, and a quartz monzonite mass of likely Late Permian or Triassic age.

The rocks of the Yarrol terrane accumulated in shallow (Mt Holly, Campwyn) and deeper (Neerkol) marine conditions proximal to an active magmatic arc which was probably of continental margin type. The Youlambie Conglomerate was deposited unconformably above the Yarrol terrane in a rift basin. Late Permian regional deformation, which involved east‐west horizontal shortening achieved by folding, cleavage formation and east‐over‐west thrusting, increases in intensity towards the east.     

Geodynamics and metallogeny of the central Eurasian porphyry and related epithermal mineral systems: A review

Major porphyry Cu–Au and Cu–Mo deposits are distributed across almost 5000 km across central Eurasia, from the Urals Mountains in Russia in the west, to Inner Mongolia in north-eastern China. These deposits were formed during multiple magmatic episodes from the Ordovician to the Jurassic. They are associated with magmatic arcs within the extensive subduction–accretion complex of the Altaid and Transbaikal-Mongolian orogenic collages that developed from the late Neoproterozoic, through the Palaeozoic, to the Jurassic intracratonic extension. The arcs formed predominantly on the Palaeo-Tethys Ocean margin of the proto-Asian continent, but also within two back-arc basins. The development of the collages commenced when slivers of an older Proterozoic subduction complex were rifted from an existing cratonic mass and accreted to the Palaeo-Tethys Ocean margin of the combined Eastern Europe and Siberian cratons. Subduction of the Palaeo-Tethys Ocean beneath the Karakum and Altai-Tarim microcontinents and the associated back-arc basin produced the overlapping late Neoproterozoic to early Palaeozoic Tuva-Mongol and Kipchak magmatic arcs. Contemporaneous intra-oceanic subduction within the back-arc basin from the Late Ordovician produced the parallel Urals-Zharma magmatic arc, and separated the main Khanty-Mansi back-arc basin from the inboard Sakmara marginal sea. By the Late Devonian, the Tuva-Mongol and Kipchak arcs had amalgamated to form the Kazakh-Mongol arc. By the mid Palaeozoic, the two principal cratonic elements, the Siberian and Eastern European cratons, had begun to rotate relative to each other, “drawing-in” the two sets of parallel arcs to form the Kazakh Orocline between the two cratons. During the Late Devonian to Early Carboniferous, the Palaeo-Pacific Ocean began subducting below the Siberian craton to form the Sayan-Transbaikal arc, which expanded by the Permian to become the Selanga-Gobi-Khanka arc. By the Middle to Late Permian, as the Kazakh Orocline continued to develop, both the Sakmara and Khanty-Mansi back-arc basins were closed and the collage of cratons and arcs were sutured by accretionary complexes. During the Permian and Triassic, the North China craton approached and docked with the continent, closing the Mongol-Okhotsk Sea, an embayment on the Palaeo-Pacific margin, to form the Mongolian Orocline. Subduction and arc-building activity on the Palaeo-Pacific Ocean margin continued to the mid Mesozoic as the Indosinian and Yanshanian orogens.Significant porphyry Cu–Au/Mo and Au–Cu deposits were formed during the Ordovician in the Kipchak arc (e.g., Bozshakol Cu–Au in Kazakhstan and Taldy Bulak porphyry Cu–Au in Kyrgyzstan); Silurian to Devonian in the Kazakh-Mongol arc (e.g., Nurkazgan Cu–Au in Kazakhstan and Taldy Bulak-Levoberezhny Au in Kyrgyzstan); Devonian in the Urals-Zharma arc (e.g., Yubileinoe Au–Cu in Russia); Devonian in the Kazakh-Mongol arc (e.g., Oyu Tolgoi Cu–Au, and Tsagaan Suvarga Cu–Au, in Mongolia); Carboniferous in the Kazakh-Mongol arc (e.g., Kharmagtai Au–Cu in Mongolia, Tuwu-Yandong Cu–Au in Xinjiang, China, Koksai Cu–Au, Kounrad Cu–Au and the Aktogai Group of Cu–Au deposits, in Kazakhstan); Carboniferous in the Valerianov-Beltau-Kurama arc (e.g., Kal’makyr–Dalnee Cu–Au in Uzbekistan; Benqala Cu–Au in Kazakhstan); Late Carboniferous to Permian in the Selanga-Gobi-Khanka arc (e.g., Duobaoshan Cu–Au in Inner Mongolia, China); Triassic in the Selanga-Gobi-Khanka arc; and Jurassic in the Selanga-Gobi-Khanka arc (e.g., Wunugetushan Cu–Mo and Jiguanshan Mo in Inner Mongolia, China). In addition to the tectonic, geologic and metallogenic setting and distribution of porphyry Cu–Au/Mo mineralisation within central Eurasia, the setting, geology, alteration and mineralisation at each of the deposits listed above is described and summarised in Table 1.     

Episodic Late Palaeozoic to Cenozoic denudation of the southeastern highlands of Australia: Evidence from the Bogong High Plains,Victoria

The Bogong High Plains of eastern Victoria occur as plateau remnants in a highly dissected region of the Australian Alps. Results from apatite fission track analyses indicate that the Bogong region experienced multiple episodes of rapid low‐temperature cooling, most of which can be tentatively linked to a tectonic cause. Early episodes of cooling occurred during the Middle to Late Devonian (ca 400–370 Ma) and Late Carboniferous to Early Permian (ca 310–290 Ma), presumably during different stages of deformation associated with the development of the Lachlan Fold Belt and glacial erosion. Rapid cooling occurred during the Late Permian to Early Triassic (ca 260–240 Ma), presumably in response to the Hunter‐Bowen orogenic event along the eastern Australian continental margin. Since the Triassic, two major episodes of fault reactivation have further displaced fission track ages between sample groups on different structural blocks. The first episode occurred during the middle Cretaceous at ca 110–90 Ma, probably in response to initial extension and denudation along the eastern Australian passive margin prior to breakup. Subsequently during the Early to mid‐Tertiary at ca 65–45 Ma, large‐scale fault reactivation occurred along the Kiewa Fault, possibly in response to changes in intraplate stresses which occurred during the middle Tertiary.     

Zinc-lead skarn deposits at Leadville, New South Wales, Australia, and their distinction from volcanic-hosted massive sulphides

Exploration of Zn-rich sulphide deposits at Leadville, northern Lachlan Fold Belt, New South Wales, for over two decades has been largely on the premise that the mineralisation represents felsic volcanic-hosted massive sulphides (VHMS). Deposits are hosted by ?Silurian felsic metavolcanic, psammopelitic and calcareous metasedimentary rocks which have been intruded by the late Carboniferous I-type Gulgong Granite. Evidence for an epigenetic replacement (skarn) origin of the deposits, rather than representing metamorphosed volcanogenic massive sulphides, includes the proximity of evolved granitic intrusives and reactive carbonate rocks, a skarn mineral assemblage (with characteristic prograde and retrograde stages), lack of textural or lithological indications of an exhalative origin, and gossan and sulphide compositions consistent with Zn-Pb skarns and atypical of Lachlan Fold Belt VHMS deposits. Furthermore, sulphide lead isotope ratios are significantly more radiogenic than signatures for VHMS deposits in the Lachlan Fold Belt. Carbonate δ¹³C and δ¹⁸O and sulphide δ³⁴S values are consistent with the interaction of magmatic hydrothermal fluids with Palaeozoic carbonate rocks and a largely magmatic source of sulphur. It is concluded that the Leadville deposits are of skarn type, genetically related to the Gulgong Granite.