Coarse carbonate breccias as a result of water-wave cyclic loading (uppermost Jurassic – South-East Basin, France)

In the uppermost Jurassic of the central part of the South-East Basin of France, an association of lime mudstone beds, calcarenite beds and coarse carbonate breccia bodies form an informal stratigraphical unit called the 'Barre Tithonique'. In the 'Barre Tithonique', gradual transitions from lime mudstone or calcarenite to breccia show different stages of deformation leading to progressive brecciation of the original lithologies. The study of the breccia facies, and the observed gradual transitions as a whole, document a new early diagenetic process in carbonate environments, resulting from water-wave and seabed interaction. Water-wave induced brecciation and its abundance in the 'Barre Tithonique' indicate that sea–seabed interaction was significant. Comparison with modern studies of the mechanics of wave–seabed interaction suggests that water depth was less than 200 m. It is demonstrated that sedimentary features such as channel-like structures, previously interpreted as being the result of erosion and deposition of mud-flows, were in fact produced by wave-induced, in situ reworking of lime mud, without any significant unidirectional flow or gravity induced displacement.     

Facies and sedimentology of a carbonate delta drift (Miocene,Maldives)

The identification of sediment drifts typically relies on interpretation of reflection seismic data sets. This study sedimentologically analyzed an example of a carbonate delta drift previously identified in seismics in order to provide a catalogue of characteristic features at core and seismic scale for allowing testing the occurrence of this poorly known type of deposit elsewhere. Cores and downhole logs recovered during International Ocean Discovery Program Expedition 359 to the Maldives, in combination with seismic data, were analyzed with this objective. The diagnostic criteria for the sedimentological recognition of a delta drift are: (i) the development of sigmoidal clinoforms that thin out towards proximal and distal settings; (ii) a proximal part characterized by coarse‐grained facies with abundant shallow‐water components and distal areas dominated by fine‐grained facies with rare to absent shallow‐water components; (iii) winnowing of the finer fraction in proximal facies; (iv) extensive fragmentation of most of the bioclasts with minor intervals of well‐preserved components; (v) bigradational intervals in the proximal part and large channels in proximal to distal settings; and (vi) the lobe to delta shaped outline of the sediment accumulation. The characteristic shallow‐water fossil assemblage of the Mid to Upper Miocene delta drift consists of large benthic foraminifera (Amphistegina, Cycloclypeus, Lepidocyclina, Operculina and Heterostegina), fragmented red algae and bryozoans, equinoid debris, and Halimeda plates. The deeper‐water part of the drift bodies consists of fine‐grained planktonic foraminifera‐rich wackestone. Condensed intervals may occur as result of enhanced bottom‐current activity. In contrast to siliciclastic drift bodies, the carbonate delta drift has an important contribution by in situ shallow‐water carbonate production reminiscent of a shoal. In situ carbonate production is proposed as a major controlling factor which is as important as the pelagic settling or the shaping by density and bottom currents in siliciclastic drifts. In the absence of three‐dimensional data and in two‐dimensional views the carbonate delta drift sediment bodies resemble carbonate ramps, which indicates that there may be the need to re‐evaluate various cases of such systems described from the geological record.     

塔里木、四川和鄂尔多斯盆地海相碳酸盐岩规模储层发育地质背景初探

前人对碳酸盐岩储层的研究重点关注储层的特征和成因上,很少关注规模储层发育的地质背景问题,而这又是深层油气勘探不可回避的问题。本文基于塔里木、四川和鄂尔多斯盆地碳酸盐岩储层实例分析,提出了不同类型储层规模发育的地质背景,认为相控型碳酸盐岩规模储层主要发育于蒸发台地、碳酸盐缓坡及台地边缘三类沉积背景,成岩型碳酸盐岩规模储层发育的控制因素复杂,具有较大的不确定性,受先存储层规模及热液规模的控制,受区域构造运动控制的成岩型储层一般具备规模发育的条件。本文还特别讨论了镶边台缘背景下台内礁滩储层的规模问题,指出障壁类型、障壁的连续性、台地类型、台内水深和地貌共同控制台内礁滩储层的规模。规模储层发育地质背认识对深层碳酸盐岩勘探领域评价具重要的指导意义,指出了塔里木、四川和鄂尔多斯盆地近期值得关注的礁滩、岩溶和白云岩三类深层碳酸盐岩储层勘探领域。     

Sedimentary patterns and geometries of the Bahamian outer carbonate ramp (Miocene–Lower Pliocene, Great Bahama Bank)

Core, logging and high-resolution seismic data from ODP Leg 166 were used to analyse deposits of the Neogene (Miocene–Lower Pliocene) Bahamian outer carbonate ramp. Ramp sediments are cyclic alternations of light- and dark-grey wackestones/packstones with interbedded calciturbidite packages and minor slumps. Cyclicity was driven by high-frequency sea-level changes. Light-grey layers containing shallow-water bioclasts were formed when the ramp exported material, whereas the dark-grey layers are dominantly pelagic. Calciturbidites are arranged into mounded lobes with feeder channels. Internal bedding of the lobes shows a north-directed shingling as a result of the asymmetrical growth of these bodies. Calciturbidite packages occur below and above sequence boundaries, indicating that turbidite shedding occurred during third-order sea-level highstands and lowstands. Highstand turbidites contain shallow-water components, such as green algal debris and epiphytic foraminifera, whereas lowstand turbidites are dominated by abraded bioclastic detritus. Gravity flow depocentres shifted from an outer ramp position during the early Miocene to a basin floor setting during the late Miocene to early Pliocene. This change was triggered by an intensification of the strength of bottom currents during the Tortonian, which was also responsible for shaping the convex morphology of the outer ramp. The Miocene and Lower Pliocene of the leeward flank of Great Bahama Bank provides an example of the poorly known depositional setting of the outer part of distally steepened carbonate ramps. The contrast between its sedimentary patterns and the well-known Upper Pliocene–Quaternary slope facies associations of the flat-topped Great Bahama Bank shows the strong control that the morphology of a carbonate platform exerts on the depositional architecture of the adjacent slope and base-of-slope successions.     

From platform to basin: the evolution of a Paleocene carbonate margin (Eastern Desert, Egypt)

In this study, progradation and the subsequent retrogradation of a late Paleocene isolated carbonate platform (Galala Mountains, Eastern Desert, Egypt) is demonstrated by variations of distinct facies associations from the platform margin in the north to the hemipelagic basin in the south. A combination of a sea-level drop and tectonic uplift at around 59 Ma (calcareous nannofossil biozone NP5) favored the initiation of the carbonate platform. From this time onwards, the facies distribution along the platform–basin transect can be subdivided into five facies belts comprising nine different facies associations. Their internal relationships and specific depositional settings are strongly coupled with the Maastrichtian–Paleocene seafloor topography, which resulted from local tectonic movements. Patch reefs and reef debris were deposited at the platform margin and the horizontally bedded limestones on the upper slope. Slumps and debris flows were stored on the lower slope. In the subhorizontal toe-of-slope facies belt, mass-flow deposits pass into calciturbidites. Further southwards in the basin, only hemipelagic marls were deposited. Between 59 and 56.2 Ma (NP5–NP8), the overall carbonate platform system prograded in several pulses. Distinct changes in facies associations from 56.2 to 55.5 Ma (NP9) resulted from rotational block movements. They led to increased subsidence at the platform margin and a coeval uplift in the toe-of-slope areas. This resulted in the retrogradation of the carbonate platform. Furthermore the patch-reef and reef-debris facies associations were substituted by the larger foraminifera shoal association. The retrogradation is also documented by a significant decrease in slump and debris-flow deposits on the slope and calciturbidites at the toe of slope.     

Carbonate shedding and sedimentary cyclicities of a distally steepened carbonate ramp (Miocene, Great Bahama Bank)

Received: 10 May 1999 / Accepted: 16 October 1999     

The Mid-Cenomanian Event in shallow marine environments: Influence on carbonate producers and depositional sequences (northern Aquitaine Basin,France)

The Mid-Cenomanian Event was a positive carbon-isotope (δ¹³C) excursion recorded in hemipelagic basins of the western Tethyan Sea, North to Tropical Atlantic Ocean, and Japan. It is thought of as a prelude to the Oceanic Anoxic Event 2. However, the Mid-Cenomanian Event has never been studied in detail in shallow marine platform deposits and it is not known how it relates to carbonate production and stratigraphic geometry. To better understand how this carbon cycle disruption influenced the neritic biological communities in shallow carbonates during the Cenomanian, a facies, geochemical, diagenetic, and sequence stratigraphic study of the northern Aquitaine platform has been conducted. Seventy-six δ¹³C and δ¹⁸O measurements have been made on micrite, rudists, and diagenetic cements. Fifteen sedimentary facies have been arranged into four depositional environments. Three third-order sequences (C_B, C_C, C_D) are defined from late early Cenomanian to early late Cenomanian and are well correlated with eustatic cycles in European basins. Two peaks of the Mid-Cenomanian Event (MCE1a, +1.2‰, and MCE1b, +1.7‰) have been identified for the first time in shallow marine carbonates. Analysis of diagenetic blocky calcite cements suggests that diagenesis did not affect the δ¹³C of micrite, which can be discussed in terms of the initial signal. The Mid-Cenomanian Event was synchronous with a turnover in neritic carbonate producers marking a transition from photozoan to heterozoan facies. This facies change resulted from the establishment of mesotrophic to eutrophic conditions at the early/mid-Cenomanian transition, reflecting a clear connection between the Mid-Cenomanian Event and neritic biological communities. Depositional geometry and carbonate production varied with δ¹³C during the Mid-Cenomanian Event on the Aquitaine platform. When δ¹³C values were between 2.5‰ and 3‰, the geometry was a flat platform with a high carbonate sedimentation rate leading to the formation of sandbars and rudist bioherms (Accommodation/Sedimentation ratio less than 1, A/S < 1). When the δ¹³C value exceeded 3‰, a carbonate demise occurred and clays and marls were deposited in the lower offshore environment (A/S >> 1). The general carbonate demise affecting the northern Aquitaine platform during the mid-Cenomanian can be explained by both a eustatic sea-level rise and the establishment of eutrophic conditions. The coincidence of the Mid-Cenomanian Event with both (1) the occurrence of mesotrophic to eutrophic conditions marked by carbonate producer turnover from photozoan to heterozoan facies and (2) the transgressive cycles, suggests that eustatic sea-level rise leading to high trophic conditions could explain this positive δ¹³C excursion in the Atlantic and western Tethyan domain. During the mid-Cenomanian, carbon cycle perturbations largely controlled the neritic biological communities on shallow carbonate platforms in a part of the western Tethyan domain.     

Facies analysis and correlation of high-order sequences in middle–outer ramp successions: variations in exported carbonate on basin-wide δ13Ccarb (Kimmeridgian, NE Spain)

Carbonate mud that accumulated in the deep parts of a late Kimmeridgian carbonate ramp (Iberian Basin, NE Spain) was partly derived by resedimentation from shallow water production areas. High-frequency sea-level changes, probably driven by climatic changes in tune with precession and short-eccentricity cycles, affected carbonate production and the amount of exported sediment. Facies analysis and correlation of three outcrops located in middle and outer ramp settings allows a comparison of high-order sequences (bundles of beds and sets of bundles) across a ramp transect and an assessment of the carbonate factory. Analysis of the storm deposits found in middle ramp settings identifies deepening to shallowing high-frequency cycles based on the level of exported carbonate. In outer ramp areas, many of the bundles exhibit a thinning trend, indicating a progressive decrease of carbonate production and hence, carbonate export during periods of high-frequency sea-level rise. δ¹³C_carb values show a gradual increase through the studied long-term transgressive interval ranging from 1·5‰ to 2·8‰. Within this long-term evolutionary trend, short-term δ¹³C_carb fluctuations occur that correspond with some of the high-order cycles defined from sedimentary facies analysis. These short-term δ¹³C_carb shifts are interpreted as shifts in carbonate export from shallow reef regions to the outer ramp. A consequence of this study is that variation in δ¹³C_carb can be used for correlation in outer ramp successions, at least on a basin-wide scale.     

Facies architecture and cyclicity in a mosaic carbonate platform: effects of fault-block tectonics (Lower Lias, Causses platform, south-east France)

In the Causses platform (south‐east France), Late Hettangian to Sinemurian deposits were interpreted previously as shallow‐water carbonate ramp deposits. A new look at these deposits has shown a fault‐controlled mosaic carbonate platform that is different from the carbonate ramp models. Within the platform mosaic, 15 lithofacies have been recognized, which are organized in four facies associations, including peritidal, restricted shallow sub‐tidal, sand dunes and sub‐tidal shelf facies associations. The rapid lateral and vertical facies changes, and the lack of consistent landward or seaward direction indicated by the pattern of facies changes, question the existence of a shoreline suggested by the traditional models for this region. Instead, the facies organization and cycle stacking pattern suggest deposition in a mosaic of intertidal islands between which sub‐tidal restricted or open conditions could coexist in very close proximity. Such a platform mosaic would have been defined by tectonic activities along normal faults which segmented the shallow‐water Causses platform. The facies and facies associations are arranged into metre‐scale, peritidal and sub‐tidal cycles that are also variable. Certain cycles show the same stacking pattern in all the sections and seem to be traceable over tens of kilometres. On the contrary, other cycles cannot be correlated; they are present only in specific sections and have a maximum lateral extension of 1 or 2 km. These metre‐scale cycles stack to form four medium‐scale cycles bounded by surfaces that display sub‐aerial exposure features. Medium‐scale cycles stack into two larger‐scale cycles (tens of metres thick) and are bounded by well‐defined karstic surfaces. Based on their lateral continuity and their stacking pattern, the metre‐scale cycles are controlled probably by high frequency eustatic variations overprinting the topographic irregularities formed by differential subsidence of fault‐bounded blocks. Episodic fault activities may reorganize the topography so that, even if eustatic changes may still be the major control of cycles, the expression and number of cycles could be different. Cycles of medium and large‐scale are interpreted as being allogenic, controlled by changes in eustasy and/or subsidence rates as evidenced by their lateral continuity and the correlations of the large‐scale cycles with third‐order depositional sequences.     

Facies model of a mixed clastic–carbonate,wave‐dominated open‐coast tidal flat (Tithonian–Berriasian,north‐east Spain)

Detailed logging and analysis of the facies architecture of the upper Tithonian to middle Berriasian Aguilar del Alfambra Formation (Galve sub‐basin, north‐east Spain) have made it possible to characterize a wide variety of clastic, mixed clastic–carbonate and carbonate facies, which were deposited in coastal mudflats to shallow subtidal areas of an open‐coast tidal flat. The sedimentary model proposed improves what is known about mixed coastal systems, both concerning facies and sedimentary processes. This sedimentary system was located in an embayed, non‐protected area of a wide C‐shaped coast that was seasonally dominated by wave storms. Clastic and mixed clastic–carbonate muds accumulated in poorly drained to well‐drained, marine‐influenced coastal mudflat areas, with local fluvial sandstones (tide‐influenced fluvial channels and sheet‐flood deposits) and conglomerate tsunami deposits. Carbonate‐dominated tidal flat areas were the loci of deposition of fenestral‐laminated carbonate muds and grainy (peloidal) sediments with hummocky cross‐stratification. Laterally, the tidal flat was clastic‐dominated and characterized by heterolithic sediments with hummocky cross‐stratification and local tidal sandy bars. Peloidal and heterolithic sediments with hummocky cross‐stratification are the key facies for interpreting the wave (storm) dominance in the tidal flat. Subsidence and high rates of sedimentation controlled the rapid burial of the storm features and thus preserved them from reworking by fair‐weather waves and tides.     

Three‐dimensional seismic analysis of sediment waves and related geomorphological features on a carbonate shelf exposed to large amplitude internal waves,Browse Basin region,Australia

This study analyses the three‐dimensional geometry of sedimentary features recorded on the modern sea floor and in the shallow subsurface of a shelf to upper slope region offshore Australia that is characterized by a pronounced internal wave regime. The data interpreted comprise an extensive, >12 500 km² industrial three‐dimensional seismic‐reflection survey that images the northern part of the Browse Basin, Australian North West Shelf. The most prominent seismic–morphological features on the modern sea floor are submarine terrace escarpments, fault‐scarps and incised channels, as well as restricted areas of seismic distortion interpreted as mass wasting deposits. Besides these kilometre‐scale sea floor irregularities, smaller bedforms were discovered also, including a multitude of sediment waves with a lateral extent of several kilometres and heights up to 10 m. These sedimentological features generally occur in extensive fields in water depths below 250 m mostly at the foot of submerged terraces, along the scarps of modern faults and along the shelf break between the outer shelf and the upper continental rise. Additional bedforms that characterize the more planar regions of the outer shelf are elongate, north‐west/south‐east oriented furrows and ridges. The formation of both sediment waves and furrow‐ridge systems requires flow velocities between 0·3 m sec^?1 and 1·5 m sec^?1, which could be generated by oceanic currents, gravity currents or internal waves. In the studied setting, these velocities can be best explained as being generated by bottom currents induced by internal waves, an interpretation that is discussed against oceanographic background data and modelling results. In addition to the documentation of three‐dimensional seismic–geomorphological features of the modern sea floor, it was also possible to map kilometre‐scale buried sediment wave fields in the seismic volume down to ca 500 ms two‐way‐time below the present sea floor, indicating the general potential for the preservation of such bedforms in the sedimentary record.     

Sequence stratigraphy and architecture of a late Early–Middle Aptian carbonate platform succession from the western Maestrat Basin (Iberian Chain, Spain)

The attributes of a ‘four-systems-tract’ sequence are at times difficult to identify in outcrop-scale carbonate successions. Poor exposure conditions, variable rates of sediment production, erosion and/or superposition of surfaces that are intrinsic to the nature of carbonate systems frequently conceal or remove its physical features. The late Early–Middle Aptian platform carbonates of the western Maestrat Basin (Iberian Chain, Spain) display facies heterogeneity enabling platform, platform-margin and slope geometries to be identified, and provide a case study that shows all the characteristics of a quintessential four systems tract-based sequence. Five differentiated systems tracts belonging to two distinct depositional sequences can be recognized: the Highstand Systems Tract (HST) and Forced Regressive Wedge Systems Tract (FRWST) of Depositional Sequence A; and the Lowstand Prograding Wedge Systems Tract (LPWST), Transgressive Systems Tract (TST) and subsequent return to a highstand stage of sea-level (HST) of Depositional Sequence B. An extensive carbonate platform of rudists and corals stacked in a prograding pattern marks the first HST. The FRWST is constituted by a detached, slightly cross-bedded calcarenite situated at the toe of the slope in a basinal position. The LPWST is characterized by a small carbonate platform of rudists and corals downlapping over the FRWST and onlapping landwards. The TST exhibits platform backstepping and marly sedimentation. Resumed carbonate production in shelf and slope settings characterizes the second HST. A basal surface of forced regression, a subaerial unconformity, a correlative conformity, a transgressive surface and a maximum flooding surface bound these systems tracts, and are well documented and widely mappable across the platform-to-basin transition area analyzed. Moreover, the sedimentary succession studied is made up of four types of parasequence that constitute stratigraphic units deposited within a higher-frequency sea-level cyclicity. Ten lithofacies associations form these basic accretional units. Each facies assemblage can be ascribed to an inferred depositional environment in terms of bathymetry, hydrodynamic conditions and trophic level. The architecture of the carbonate platform systems reflects a flat-topped non-rimmed depositional profile. Furthermore, these carbonate shelves are interpreted as having been formed in low hydrodynamic conditions. The long-term relative fall in sea-level occurred during the uppermost Early Aptian, which subaerially exposed the carbonate platform established during the first HST and resulted in the deposition of the FRWST, is interpreted as one of global significance. Moreover, a possible relationship between this widespread sea-level drop and glacio-eustasy seems plausible, and could be linked to the cooling event proposed in the literature for the late Early Aptian. Because of the important implications in sequence stratigraphy of this study, the sedimentary succession analyzed herein could serve as an analogue for the application of the four-systems-tract sequence stratigraphic methodology to carbonate systems.     

Sequential and climatic framework of the growth and demise of a carbonate platform: implications for the peritidal cycles (Late Jurassic,North‐eastern France)

The Middle Oxfordian of the eastern Paris Basin constitutes a remarkable example of the growth and demise of a carbonate platform. Fischer plots, sedimentary and diagenetic features allow the identification of four depositional cycles (S5 to S8) in the Transversarium Zone; they are inserted in a lower frequency cycle of increased/decreased accommodation space (SoIII). The long‐term period of accommodation creation occurred during the older S5 and S6 cycles, the maximum accommodation zone being located in the lower part of the S6 cycle. This high accommodation period was tectonically controlled and was coeval with local distensive activity of a Hercynian fault. A major minimum accommodation zone exists during the S8 cycle. At that time, the platform was isolated and presented both a windward and a leeward margin. The growth of the platform was favoured by a warm and arid climate, oligotrophic conditions and reduced siliciclastic input during a highstand in relative sea‐level. These palaeoenvironmental features favoured the proliferation of phototrophic organisms producing carbonate material. The death of the platform was generated by a reduction in the carbonate production surface during a lowstand in relative sea‐level and by the appearance of mesotrophic conditions induced by the increase in siliciclastic inputs at the beginning of a period with a cooler and more humid climate. In the eastern Paris Basin, during the Middle Oxfordian, the parasequences are ordered and present ‘greenhouse’ characteristics. In contrast, at the beginning of the S8 cycle, the randomness in the thickness of contiguous parasequences increased. Decreased carbonate production during the lowstand caused by a transition from photozoan to heterozoan benthic communities certainly favoured this randomness and the appearance of catch‐down parasequences.     

Sedimentation in shallow to deep water carbonate environments across a sequence boundary: effects of a fall in sea-level on the evolution of a carbonate system (Ladinian-Carnian, eastern Lombardy, Italy)

In the Concarena‐Pizzo Camino Massif (Lombardy Basin, Southern Alps, Italy) the lateral transition from Ladinian‐Carnian carbonate platforms to coeval intraplatform basins is preserved. The succession records the sedimentological evidence of a sea‐level fall on a flat‐topped platform with a narrow marginal reef rim and its effects in the adjacent deeper‐water basin. Repeated high‐frequency exposures of the platform top are recorded by a peritidal–supratidal succession that overlies subtidal inner platform facies of the former highstand system tract (HST). On the slope and in the basin, the sea‐level fall is recorded by a few metre thick succession of bioclastic packstones. These facies directly lie on coarse clinostratified breccia bodies (slope facies of the former HST) or on resedimented, well‐bedded, dark laminated limestones (basinal facies of the HST). This facies distribution indicates that during the sea‐level fall carbonate production on the platform top decreased rapidly and that sedimentation in the basin was mainly represented by condensed facies. Microfacies record an enrichment, during low stand, in pelagic biota (packstones with radiolarians and spiculae), whereas the occurrence of platform‐derived, shallow‐water materials is limited to thin lenses of reworked and micritized Fe‐rich oolites and bioclasts (mainly pelecypods and echinoderms). The facies association in the Concarena‐Pizzo Camino Massif demonstrates that a highly‐productive carbonate factory was almost completely turned off during the emergence of the platform top at a sequence boundary, leading to low‐stand starvation in the basin. The reconstruction of the stratigraphic evolution of the Concarena‐Pizzo Camino carbonate platform therefore represents a significant case history for the study of the behaviour of ancient carbonate systems during a fall in sea‐level, independent of its origin (eustatic or tectonic).     

Submarine lobes and feeder channels of redeposited, temperate carbonate and mixed siliciclastic-carbonate platform deposits (Vera Basin, Almería, southern Spain)

Temperate carbonates and mixed siliciclastics-carbonates of Upper Tortonian age were deposited on a narrow platform along the southeastern margin of the Sierra de los Filabres on the western side of the Vera Basin. The temperate carbonates were unlithified or were only weakly lithified on the seafloor and so were easily prone to synsedimentary removal. Part of the shelf sediments were eroded, reworked and redeposited in submarine lobes, up to 40 m thick and 1 km wide. The lobes consist of turbiditic carbonates (calcarenites and calcirudites) and mixed siliciclastics-carbonates, which contain up to 30% siliciclasts, derived from the Sierra de los Filabres to the northwest, and abundant bioclasts of coralline algae, bivalves and bryozoans. In the inner platform, the feeder channels of the lobes cross-cut beach and shoal deposits, and are filled by strings of debris flow conglomerates (up to 3 m thick and a few metres wide). These channels presumably developed as the continuation of river courses entering the sea. Further towards the outer platform, they pass into large channels (up to several hundred metres wide and 20 m deep) steeply cutting into the horizontally bedded strata of the platform. Significant quantities of platform sediment were removed by erosion during their excavation. Once abandoned, they were filled by new platform sediments. Further towards the basin, the channels associated with the lobes exhibit lateral accretion and internal cut-and-fill structures, and are intercalated between hemipelagic deposits. The channel-filling sediments are in this latter case coarse-grained carbonates and mixed siliciclastics-carbonates. Lobe development concentrated first at Cortijo Grande on the western side of the study area, and then to the east at Mojácar. This migration may relate to the uplift of the Sierra Cabrera, a major high occurring immediately to the south of the channel and lobe outcrops.     

Facies, cycles, and controls on the evolution of a keep-up carbonate platform (Kimmeridgian, Swiss Jura)

During the Late Jurassic, accelerated ocean-floor spreading and associated sea-level rise were responsible for a worldwide transgression, which reached its maximum in the Late Kimmeridgian. In many Western European basins, this major sea-level rise led to the formation of marly and condensed sections. In the Swiss Jura, however, a shallow carbonate platform kept growing and only subtle changes in the stratigraphic record suggest an increasingly open-marine influence. Field observations and thin-section analyses reveal that the central Swiss Jura was at that time occupied by tidal flats and by more or less open marine lagoons where shoals and bioherms developed. The evolution through time of sedimentary facies and bed thicknesses permits the definition of small-, medium-, and large-scale depositional sequences. The diagnostic features of these sequences are independent of scale and seem largely controlled by the Kimmeridgian second-order transgression. A high-resolution sequence-stratigraphic correlation with biostratigraphically well-dated hemipelagic and pelagic sections in the Vocontian Basin in France reveals that: (i) The most important increase in accommodation recorded in the Kimmeridgian of the central Swiss Jura occurs in the Eudoxus ammonite zone (Late Kimmeridgian) and corresponds to the second-order maximum flooding recognized in many sedimentary basins. (ii) The small- and medium-scale sequences have time durations corresponding to the first and second orbital eccentricity cycle (i.e. 100 and 400 ka, respectively), suggesting that sedimentation on the platform and in the basin was at least partly controlled by cyclic environmental changes induced by insolation variations in the Milankovitch frequency band. The comparison of the high-resolution temporal framework defined in the Swiss Jura and Vocontian Basin with the sequence-stratigraphic interpretation realized in other Western European basins shows that the large-scale sequence boundaries defined in the Kimmeridgian of the Swiss Jura appear in comparable biostratigraphic positions in most Western European basins. Discrepancies that occur are probably because of local or regional tectonics.     

The intrinsic effect of shape on the retrogradation motif and timing of drowning of carbonate patch reef systems (Lower Frasnian,Bugle Gap,Canning Basin,Western Australia)

The evolution and architecture of a set of retreating Lower Frasnian patch reef outcrops in the Canning Basin of Western Australia were evaluated, and their depositional and stratigraphic contacts spatially recorded using digital surveying tools. The geological data, together with high‐resolution digital elevation models, were assembled in three‐dimensional visualization and modelling software and subsequently used for building two‐dimensional surface models and three‐dimensional volumetric models. Numerical data on geometry and shape were extracted from these models and used to quantitatively assess the retrogradation motif of patch reef development. The development of the patch reefs comprises three stages. During stages 1 and 2, the patch reefs exhibited an overall retrogradational escarpment‐type configuration displayed by, on average, 60° steep reef‐margin walls that lacked the support of coeval slope deposits. The subdivision between stages 1 and 2 is based on minor backstepping reducing less than 10% of the platform‐top area. The onset of stage 3 is recognized by stromatolite development fringing reef‐margin walls. During stage 3 an aggrading accretionary reef‐margin developed, comprising allochthonous and autochthonous slope deposits. Both types of slope deposit onlap the previous stages and are distributed unevenly with allochthonous slope deposits being noticeably absent around the smaller and more elongate patch reefs. The variation in distribution of slope sediment type can be explained by the amount, linked to platform size, of platform‐top shedding. Small patch reefs were unable to fill the available accommodation adjacent to escarpments with allochthonous slope sediments and were thus encroached by autochthonous slope sediments. The variation, which cannot be explained by the size difference in the platform‐top factory, has been related to the difference in perimeter length. For patch reefs with similar platform‐top production areas, a more elongate patch reef inherits a longer perimeter and a proportionally smaller volume of allochthonous slope sediment per margin length will be transported to the flanks. Thus, the more elongate patch reef intrinsically contained more sites within which autochthonous slope sediments developed. Digital outcrop modelling and numerical evaluation of the evolution of the patch reefs revealed the major differences in retrogradation motif. The quantified variations in progressive decline of platform‐top area with height were confirmed by hypothetical decline curves for ellipse‐shaped carbonate systems for which aspect ratio (ratio between length and width) varied. This mathematical model demonstrates that the progressive decline of the production area is highly sensitive to shape and can be used to numerically assess and predict the relative timing of drowning, i.e. when the platform‐top production area becomes nil, of retrogradational isolated carbonate platforms that are controlled by high accommodation. Wider implications can be surmised for highstand systems tracts and prograding carbonate systems. For example, for equally sized platforms with hypothetically similar carbonate factories and identical external forces, the potential to prograde by platform‐top shedding is higher with a smaller aspect ratio because the shorter perimeter implies less accommodation space needing to be filled up to commence slope progradation. Clearly, there are intrinsic effects of shape on the development of carbonate platform systems.     

Downslope‐migrating sandwaves and platform‐margin clinoforms in a current‐dominated,distally steepened temperate‐carbonate ramp (Guadix Basin,Southern Spain)

During the Late Tortonian, platform‐margin‐prograding clinoforms developed at the south‐western margin of the Guadix Basin. Large‐scale wedge‐shaped deposits here comprise 26 rhythms of mixed carbonate–siliciclastic bedset packages and marl beds. These sediments were deposited on a shallow‐water, temperate‐carbonate distally steepened ramp. A downslope‐migrating sandwave field developed in this ramp, with sandwaves moving progressively down the ramp to the ramp‐slope, where they destabilized, folded and occasionally collapsed. Downslope sandwave migration was induced by currents flowing basinwards. During the Late Tortonian, the Guadix Basin was open north to the Atlantic Ocean via the Dehesas de Guadix Strait and connected east to the Mediterranean Sea through the Almanzora Corridor. According to the proposed current circulation model for the Guadix Basin for this time, surface marine currents from the Atlantic entered the basin from the northern seaway. These currents moved counter‐clockwise and shifted the sediment on the ramp, forming sandwaves that migrated downslope. The development of platform‐margin prograding clinoforms by the basinward sediment‐transport mechanisms inferred here is known relatively poorly in the ancient sedimentary record. Moreover, these wedge‐shaped geometries are similar to those found in some shelves in the Western Mediterranean Sea and could represent an outcrop analogue to (sub)‐recent, platform‐margin clinoforms revealed by high‐resolution seismic studies.     

旅游活动对巴马水晶宫洞穴环境及碳酸钙沉积物景观的影响

巴马县水晶宫洞内次生化学碳酸盐（钙）沉积物景观丰富,类型多样,有石钟乳、石幔、石瀑布、石笋、石柱、石盾等特色景观;尤其是近期仍在发育的洞顶鹅管、卷曲石、石花和石毛等是国内外较为罕见的洞穴奇景。自2007年水晶宫开发以来,对巴马水晶宫洞穴环境及碳酸钙沉积物景观等进行了监测,发现洞穴内流水、滴水、池水数量点减少; 洞穴温度升高、湿度降低,CO2浓度增加,空气负离子浓度减小以及普遍滋生(藻类、苔藓、蕨类等)灯光植物和洞穴景观表面的污染与变色污染、老化等现象。依据洞穴环境变化规律,提出有利于洞穴环境保护以及景观修复的相关措施,为科学合理保护开发旅游洞穴提供重要的科学依据及广泛的应用前景。