An analogue model study of EM induction in the North China-Korea coastal region

The behaviour of the magnetic field variations over the North China-Korea coastal region is studied with the aid of a scaled laboratory analogue model. The model source frequencies simulate naturally occurring geomagnetic variations of 3–60 min periods. In-phase and quadrature magnetic B_x, B_y and B_z field measurements for the modelled region are presented for E- and B-polarizations. Large anomalous in-phase and quadrature model magnetic fields are observed over the Korea-Japan strait for E-polarization and over the Bohai strait for B-polarization due to current channelling through the straits. Large responses of the peninsulas in the shallow coastal areas occur at short periods but decrease abruptly with increasing period. In general, the effects of peninsulas, straits, bays and irregularities in the coastlines play an important role in the magnetic field responses both on-shore and off-shore for this complex North China-Korea coastal region. Model and field site induction arrows are compared for three sites west of Bohai Bay.     

An analogue model study of electromagnetic induction in the eastern coastal region of North America

The behavior of electric and magnetic field variations over the eastern coastal region of North America is studied using a scaled laboratory electromagnetic analogue model. The model source frequency used simulates a period of 1 h in the geophysical scale. The results indicate that deflection and conductive channelling of induced electric current is important for both the E-polarization (northeast-southwest direction of the electric field of the source) and the H-polarization (northwest-southeast) of the source field. In the model, conductive channelling occurs through the Strait of Belle Isle, Cabot Strait, and in the St. Lawrence River. Current deflection is particularly prevalent around the southeast coast of Newfoundland for both E- and H-polarization, and around the northeast coastline of Nova Scotia for E-polarization. The model results also show current deflection by cape and bay coastal features, as well as by ocean depth contours.A comparison of model measurements for the cases of a uniform source field and a line current source indicate that the nature of the source field has a measurable but surprisingly small effect on the vertical to horizontal magnetic field ratio for both E- and H-polarizations, and negligible effect on the magnetotelluric ratio for coastal regions.The model fields in coastal regions were found to be strongly influenced by induced currents, deflected and channelled by the coastline and ocean bathymetry, and were dependent on the nature and particularly the polarization of the source field. Thus, along the complex coastline of eastern North America, a wide range of electric and magnetic field values should be expected. In some regions the coast effect, measured by the vertical to horizontal magnetic field ratio at the coast, could be expected to be extremely small or absent, while in other regions the ratio could approach a value as large as unity for variations of 1 h period.     

An intercomparison between finite difference and finite element (TELEMAC) approaches to modelling west coast of Britain tides

A finite element model (namely TELEMAC) with a range of mesh refinements and assumptions of coastal water depths is used to determine an optimal mesh for computing the M ₂ tide in a region of significant geographical extent. The region adopted is the west coast of Britain covering the Irish and Celtic Seas. The nature of the spatially varying topography and tidal distribution, together with a comprehensive set of measurements and existing accurate finite difference model makes it ideal for such a study. Calculations show that a water-depth dependent criterion for determining element size gives an optimal distribution over the majority of the region. However, local refinements in narrow channels such as the North Channel and Bristol Channel are required. Although the specification of a zero coastal water depth, leads to a fine near coastal grid, this does not yield the most accurate solution. In addition the computational cost is high. In practice in a large area model the use of a non-zero coastal water depth yields optimum accuracy at minimal computational cost. However, calculations show that accuracy is critically dependent upon nearshore water depths. Comparison with the finite difference model shows that the bias in elevation amplitude in the finite difference solution is removed in the finite element calculation.     

Dispersion of dissolved trace metals from the Irish Sea into Scottish coastal waters

An investigation has been undertaken into the dispersal of contaminants from the Irish Sea into coastal waters of Scotland via the North Channel. A total of 97 surface samples have been analysed for dissolved copper, cadmium and lead. Salinity and reactive phosphate have also been determined. Evidence is presented to suggest that copper, cadmium and reactive phosphate behave essentially conservatively on mixing into Scottish coastal waters. This behaviour is likened to the dispersal of¹³⁷Cs from the Sellafield nuclear fuel reprocessing plant. It is suggested that this simple mechanism is inadequate to account for the lead distribution. It is proposed that this element is partly taken up by suspended particulates and sediments in the well-mixed turbid waters of the North Channel.It has been demonstrated elsewhere that contaminants from the Irish Sea, such as¹³⁷Cs enter the Firth of Clyde from the North Channel. In the present study North Channel waters are demonstrated to be an important source of trace metals to the Firth of Clyde. At the time of this survey however high concentrations of trace metals were not entering the Firth of Clyde from the North Channel. This is principally attributed to a salinity front associated with the entrance of the Firth which hinders transport across the sill.     

North Atlantic marine 14C reservoir effects: Implications for late-Holocene chronological studies

We investigated surface ocean–atmosphere ¹⁴C offsets for the later Holocene at eight locations in the eastern North Atlantic. This resulted in 11 new ΔR assessments for the west coast of Ireland, the Outer Hebrides, the north coast of the Scottish mainland, the Orkney Isles and the Shetland Isles over the period 1300–500 BP. Assessments were made using a robust Multiple Paired Sample (MPS) approach, which is designed to maximize the accuracy of ΔR determinations. Assessments are placed in context with other available data to enable reconstruction of a realistic picture of surface ocean ¹⁴C activity over the Holocene period within the North Atlantic region.     

Tidal currents,energy flux and bottom boundary layer thickness in the Clyde Sea and North Channel of the Irish Sea

A high-resolution three-dimensional model of the Clyde Sea and the adjacent North Channel of the Irish Sea is used to compute the major diurnal and semidiurnal tides in the region, the associated energy fluxes and thickness of the bottom boundary layer. Initially, the accuracy of the model is assessed by performing a detailed comparison of computed tidal elevations and currents in the region, against an extensive database that exists for the M₂, S₂, N₂, K₁ and O₁ tides. Subsequently, the model is used to compute the tidal energy flux vectors in the region. These show that the major energy flux is confined to the North Channel region, with little energy flux into the Clyde Sea. Comparison with the observed energy flux in the North Channel shows that its across-channel distribution and its magnitude are particularly sensitive to the phase difference between elevation and current. Consequently, small changes in the computed values of these parameters due to slight changes of the order of the uncertainty in the open-boundary values to the model, can significantly influence the computed energy flux. The thickness of the bottom boundary layer in the region is computed using a number of formulations. Depending upon the definition adopted, the empirical coefficient C used to determine its thickness varies over the range 0.1 to 0.3, in good agreement with values found in the literature. In the North Channel, the boundary layer thickness occupies the whole water depth, and hence tidal turbulence produced at the sea bed keeps the region well mixed. In the Clyde Sea, the boundary layer thickness is a small fraction of the depth, and hence the region stratifies.Responsible Editor: Phil Dyke     

On the sensitivity of computed surges to open-boundary formulation

A coarse-grid (resolution of order 7 km) model of the west coast of Britain is used to examine the sensitivity of computed storm-surge elevations and currents to a range of open-boundary conditions. The storm-surge period 1 to 26 March 1994 is used for this comparison, as it is a time of significant wind activity. Also current measurements in the North Channel of the Irish Sea together with coastal elevation measurements are available for model validation. Elevations and currents previously computed with a coarse-grid shelf-wide model can also be incorporated into the open-boundary condition to examine the influence of far-field effects. Initial model calculations with no far-field input show the importance of including shelf-wide effects from either the external shelf model, or by using observations from coastal gauges interpolated along the open boundary of the west-coast model. Provided the west-coast models open boundary is taken sufficiently far away from the region of interest, in this case the Irish Sea, then either a radiation condition or an elevation-specified condition is appropriate provided far-field effects are taken into account. If these are not included, then neither boundary condition is successful. For the radiation condition it is necessary to include both elevations and currents from a far-field model in order to reproduce the surge. In the case of an elevation-specified boundary condition far-field effects can be incorporated in hindcast calculations by including observed sea-level changes. In a storm-surge prediction calculation the radiation condition with a far-field model is required. Calculations show that computed elevations are spatially more coherent than currents, with flows through the western Irish Sea showing the greatest sensitivity to open-boundary formulation during storm events.Responsible Editor: Phil Dyke     

On the tidally driven circulation in the South China Sea: modeling and analysis

The South China Sea is a large marginal sea surrounded by land masses and island chains, and characterized by complex bathymetry and irregular coastlines. An unstructured-grid SUNTANS model is employed to perform depth-averaged simulations of the circulation in the South China Sea. The model is tidally forced at the open ocean boundaries using the eight main tidal constituents as derived from the OSU Tidal Prediction Software. The model simulations are performed for the year 2005 using a time step of 60 s. The model reproduces the spring-neap and diurnal and semidiurnal variability in the observed data. Skill assessment of the model is performed by comparing model-predicted surface elevations with observations. For stations located in the central region of the South China Sea, the root mean squared errors (RMSE) are less than 10 % and the Pearson’s correlation coefficient (r) is as high as 0.9. The simulations show that the quality of the model prediction is dependent on the horizontal grid resolution, coastline accuracy, and boundary locations. The maximum RMSE errors and minimum correlation coefficients occur at Kaohsiung (located in northern South China Sea off Taiwan coast) and Tioman (located in southern South China Sea off Malaysia coast). This may be explained with spectral analysis of sea level residuals and winds, which reveal dynamics at Kaohsiung and Tioman are strongly influenced by the seasonal monsoon winds. Our model demonstrates the importance of tidally driven circulation in the central region of the South China Sea.     

Influence of the residual circulation on the physico-chemical characteristics of water masses and the dynamics of ecosystems in the Belgian coastal zone

Classical models of the residual circulation in the North Sea predict a north-bound residual flow in the Southern Bight. A more refined model, taking into account the mesoscale Reynolds stress exerted in the mean on the residual flow by the non-linear interactions of mesoscale processes (tides, storm surges, etc.), shows on the contrary off the Belgian coast a south-bound coastal current in relation with a residual coastal gyre. Observations of the physico-chemical characteristics of coastal waters confirm the existence of the gyre. The dynamics of coastal ecosystems here are found to be determined by the gyre; successive stages of the pelagic food chain displaying a typical spatial distribution along the deflected plume of the Scheldt estuary around the gyre ‘outerlagoon’.     

(235)U, (238)U, (232)Th, (40)K and (137)Cs activity concentrations in marine sediments along the northern coast of Oman Sea using high-resolution gamma-ray spectrometry

The natural radioactivity levels in sediment samples of the northern coast of Oman Sea, covering the coastal strip from Hormoz canyon to Goatr seaport, as the first time has been determined. The results of measurements will serve as background reference level for Oman Sea coastlines. Sediments from 36 coastal and near shore locations were collected for analysis. Analysis on the collected samples were carried out to determine (235)U, (238)U, (232)Th, (40)K and (137)Cs using two high purity germanium detectors with 38.5% and 55% relative efficiencies. The concentration of (235)U, (238)U, (232)Th, (40)K and (137)Cs in sediment samples ranged between 1.01 and 2.87Bq/kg, 11.83 and 22.68Bq/kg, 10.7 and 25.02Bq/kg, 222.89 and 535.07Bq/kg and 0.14 and 2.8Bq/kg, respectively. The radium equivalent activity was well below the defined limit of 370Bq/kg. The external hazard indices were found to be less than 1, indicating a low dose.     

A 3-D coastal tidal rectification process: observations, theory and experiments

In homogeneous rotating fluid, when there is an oscillating forcing in the interior fluid with a period long enough for an Ekman layer to develop, there is an interaction between the oscillatory Ekman layer and the vertical wall, since the latter imposes an alternating adjustment flow confined near the wall. As a result, this coastal rectification process leads to a Lagrangian transport along the coast. The Ekman number, the Rossby number and the temporal Rossby number of the forcing flow are the governing parameters of that mechanism which can be described by a simplified analytical model taking into account both the vertical time-dependent structure of the current and the presence of the wall. The model shows that the residual (rectified) current flowing with the coast to its right results from the strong nonlinear interaction between along- and cross-shore tidal currents leading to asymmetrical momentum exchanges between the Ekman bottom layer and the coastal boundary layer. The model provides simple scaling laws for the maximum intensity and width of the residual current. The latter is significantly larger than the friction (Stokes) lateral boundary layer of the forcing flow. A comprehensive set of experiments is performed in the 13 m diameter rotating tank by oscillating an 8 m×2 m horizontal plate and vertical wall in a homogeneous fluid at rest in solid-body rotation and measuring the two horizontal components of the current at several locations and depths above the central part of the plate. The predicted and experimentally measured maximum intensity and width of the residual current are in very good agreement, within the range of validity of the model, i.e. when the Ekman number is sufficiently small. However experiments also show that the residual current still occurs when the Ekman layer thickness is of the same order as the fluid depth, but it is then confined to a narrower band along the vertical wall. The flow structure found experimentally is also correctly described by a numerical model developed by Zhang et al. (1994). Current measurements in the Eastern part of the English Channel near the French coast reveal a significant coastal residual current flowing Northward and the coastal rectification process described here may account for part of it.     

Computing near coastal tidal dynamics from observations and a numerical model

A two-dimensional vertically integrated model of the North Sea is used to compute the distribution of M₂ and M₄ tidal elevations and currents over the region. Comparison of computed and observed elevations and currents in the area shows that the model can accurately reproduce the M₂ tide in the North Sea, although there are difficulties with the M₄ tide particularly in the northern North Sea.Comparison between model and a large number of observations collected in a shallow water region off the east coast of England, revealed that the model can accurately reproduce the tides even in near coastal regions, where model resolution problems can occur. Comparisons of computed and observed M₂ tidal energy fluxes in this region, show that model and observations agree to within the order of 10% (the error associated with the necessary interpolation of the observations in order to compute the energy flux).The problem of computing energy dissipation in the area by subtracting the energy fluxes into and out of the region is shown to be ill-conditioned in that the energy dissipation in the area is comparable to the error in the energy flux. Consequently for the sea region considered here it is not meaningful to compare this energy budget with energy dissipation due to bottom friction.Energy dissipation for the whole of the North Sea is computed using the numerical model and the geographical distribution of dissipation due to bottom friction is given for the M₂ tide.     

Mercury content of mussels from west European coasts

Mussels have been sampled from the east side of the North Sea from Arcachon in France to Cape Skagen in Denmark and on the west side from Lands End to Edinburgh. High levels of mercury occur in mussels taken from the vicinity of the Rhine and Eems Dollard, and values on the British coast are generally higher than on the east side of the North Sea.     

Atmospheric input of nitrogen into the North Sea: ANICE project overview

The aim of the atmospheric nitrogen inputs into the coastal ecosystem (ANICE) project is to improve transport–chemistry models that estimate nitrogen deposition to the sea. To achieve this, experimental and modelling work is being conducted which aims to improve understanding of the processes involved in the chemical transformation, transport and deposition of atmospheric nitrogen compounds. Of particular emphasis within ANICE is the influence of coastal zone processes. Both short episodes with high deposition and chronic nitrogen inputs are considered in the project. The improved transport–chemistry models will be used to assess the atmospheric inputs of nitrogen compounds into the European regional seas (the North Sea is studied as a prototype) and evaluate the impact of various emission reduction strategies on the atmospheric nitrogen loads. Assessment of the impact of atmospheric nitrogen on coastal ecosystems will be based on comparisons of phytoplankton nitrogen requirements, other external nitrogen inputs to the ANICE area of interest and the direct nitrogen fluxes provided by ANICE. Selected results from both the experimental and modelling components are presented here. The experimental results show the large spatial and temporal variability in the concentrations of gaseous nitrogen compounds, and their influences on fluxes. Model calculations show the strong variation of both concentrations and gradients of nitric acid at fetches of up to 25 km. Aerosol concentrations also show high temporal variability and experimental evidence for the reaction between nitric acid and sea salt aerosol is provided by size-segregated aerosol composition measured at both sides of the North Sea. In several occasions throughout the experimental period, air mass back trajectory analysis showed connected flow between the two sampling sites (the Weybourne Atmospheric Observatory on the North Norfolk coast of the UK and Meetpost Noordwijk, a research tower at 9 km off the Dutch coast). Results from the METRAS/SEMA mesoscale chemistry transport model system for one of these cases are presented. Measurements of aerosol and rain chemical composition, using equipment mounted on a commercial ferry, show variations in composition across the North Sea. These measurements have been compared to results obtained with the transport–chemistry model ACDEP which calculates the atmospheric inputs into the whole North Sea area. Finally, the results will be made available for the assessment of the impact of atmospheric nitrogen on coastal ecosystems.     

Hydrocarbon concentrations in water and sediments from UK marine waters,determined by fluorescence spectroscopy

Between January 1978 and September 1979 samples of subsurface (1 m) water and surface sediment were collected from sites in the North Sea, English Channel, Irish Sea and a number of estuarine areas. These have been analysed by fluorescence spectroscopy (UVF) in order to provide information on the levels of hydrocarbons generally present in UK marine waters.Total hydrocarbon concentrations (THCs) of water samples ranged from 1.1–74 μg l.^?1 Ekofisk crude oil equivalents, all values greater than 3.5 μg l.^?1 occurring inshore. In offshore areas the mean THCs were: 1.3 μg l.^?1 in the northern North Sea, 1.5 μg l.^?1 in the western Channel, 2.5 μg l.^?1 in the eastern Channel and southern North Sea, and 2.6 μg l.^?1 in the Irish Sea.THCs of sediment samples ranged from 0.27–340 μ g^?1 dry weight Ekofisk crude oil equivalents, the highest concentration being in the Queen's Channel, the main entrance to the River Mersey.     

An idealized model of tidal dynamics in the North Sea: resonance properties and response to large-scale changes

An idealized process-based model is developed to investigate tidal dynamics in the North Sea. The model geometry consists of a sequence of different rectangular compartments of uniform depth, thus, accounting for width and depth variations in a stepwise manner. This schematization allows for a quick and transparent solution procedure. The solution, forced by incoming Kelvin waves at the open boundaries and satisfying the linear shallow water equations on the f plane with bottom friction, is in each compartment written as a superposition of eigenmodes, i.e. Kelvin and Poincaré waves. A collocation method is employed to satisfy boundary and matching conditions. First, the general resonance properties of a strongly simplified geometry with two compartments, representing the Northern North Sea and Southern Bight, are studied. Varying the forcing frequency while neglecting bottom friction reveals Kelvin and Poincaré resonance. These resonances continue to exist (but with lower amplification and a modified spatial structure) when adding the Dover Strait as a third compartment and separating the solutions due to forcing from either the north or the south only. Including bottom friction dampens the peaks. Next, comparison with tide observations along the North Sea coast shows remarkable agreement for both semi-diurnal and diurnal tides. This result is achieved with a more detailed geometry consisting of 12 compartments fitted to the coastline of the North Sea. Further simulations emphasize the importance of Dover Strait and bottom friction. Finally, it is found that a sea level rise of 1 m, uniformly applied to the entire North Sea, amplifies the M2-elevation amplitudes almost everywhere along the coast, with an increase of up to 8 cm in Dover Strait. Bed level changes of ±1 m, uniformly applied to the Southern Bight only, imply weaker changes, with changes in coastal M2-elevation amplitudes below 5 cm.     

Simulated wind-generated inertial oscillations compared to current measurements in the northern North Sea

Measured current speed data show that episodes of wind-generated inertial oscillations dominate the current conditions in parts of the northern North Sea. In order to acquire current data of sufficient duration for robust estimation of joint metocean design conditions, such as wind, waves, and currents, a simple model for episodes of wind-generated inertial oscillations is adapted for the northern North Sea. The model is validated with and compared against measured current data at one location in the northern North Sea and found to reproduce the measured maximum current speed in each episode with considerable accuracy. The comparison is further improved when a small general background current is added to the simulated maximum current speeds. Extreme values of measured and simulated current speed are estimated and found to compare well. To assess the robustness of the model and the sensitivity of current conditions from location to location, the validated model is applied at three other locations in the northern North Sea. In general, the simulated maximum current speeds are smaller than the measured, suggesting that wind-generated inertial oscillations are not as prominent at these locations and that other current conditions may be governing. Further analysis of the simulated current speed and joint distribution of wind, waves, and currents for design of offshore structures will be presented in a separate paper.     

High-resolution X-Band radar measurements of currents,bathymetry and sea state in highly inhomogeneous coastal areas

In this paper, high-resolution wave, current and water depth fields derived by marine X-Band radar are presented for a coastal region of extreme tidal currents in the presence of inhomogeneous bathymetry at the south coast of New Zealand’s North Island. The current and water depth information for the presented location covers an area of approximately 13 km² with a spatial resolution of 225 m and an update rate of 3 min. The sea state data provides a spatial representation of coastal effects like wave shoaling and refraction forced by bathymetry and current interaction. The near-surface current measurements about 3 km off the coast show expected tidal current pattern with maximum northwest/southeast current of 1.5–2 m/s alongshore. This is in agreement with currents from the RiCOM hydrodynamic model. The spatial resolution of the observed current field exhibits in addition small-scale current features caused by the influence of the local bathymetry. These data demonstrate the insight to be gained in complex, high-energy coastal situations through the use of high-resolution remote sensing techniques.