基于重磁场多尺度边缘检测的地质构造信息识别与提取——以铜陵矿集区为例

重磁场是地下地质体密度、磁性分别响应的综合,蕴涵着丰富的地质构造信息,如何将其有效地提取出来是正确认识地下结构的关键环节.本文在总结重磁场构造信息提取研究进展的基础上,将构造信息提取突破口归结为重磁场的边缘增强与检测.通过构建理论模型,对常用的边缘检测方法开展了对比试验,并以长江中下游成矿带中的铜陵矿集区为例,开展了实际资料的处理和研究.获得以下认识和结论:(1)多尺度边缘检测方法较其他方法更能准确提取模型边界,更适合于构造信息识别与提取;(2)在铜陵矿集区识别出18条断裂构造,确定了铜陵隆起的边界,断裂构造的走向主要为北东向,前人所谓"棋盘格式"断裂构造系统并不存在;(3)圈定了岩体的分布范围,在铜陵矿集区北缘,发现了2处隐伏岩体;(4)施家冲、戴家汇岩体周边是寻找矽卡岩型、斑岩型铜金矿的有利地段,铜陵隆起和繁昌火山岩盆地分界断裂两侧是寻找热液型铅锌矿和金矿的重要靶区.     

The distribution,characteristics and fluid sources of lode gold deposits: An overview

Lode gold deposits are among the most economically important types of gold deposits in the world. Globally, they formed mainly in three time intervals, 2.8 to 2.5 Ga, 2.1 to 1.8 Ga, and 700 Ma to the present. Sources of ore-forming fluids and other components are of critical importance in a better understanding of the genesis and the geodynamic controls of these deposits. Although ore-forming fluids were mostly derived from devolatization of sedimentary and/or volcanic sequences during greenschist to amphibolite facies metamorphism associated with orogenic deformation, magmatic hydrothermal fluids have been increasingly shown to be important in many gold deposits in various regions. In this review paper, we summarize the major features of lode gold deposits, possible sources of ore-forming fluids, and mechanisms of gold mineralization. While we acknowledge the critical role of metamorphically derived fluids in the genesis of such deposits worldwide, we emphasize that mantle-or basaltic magma-derived fluids may have been much more important than commonly thought. We use the Liaodong peninsula of the North China Craton as an example to demonstrate the significance of mantle-derived fluids. Integrating earlier studies and new data, we show that some of the late Mesozoic lode gold deposits in the North China Craton may have formed from magmatic hydrothermal fluids due to the extension and partial melting of the hydrated, metasomatized subcontinental lithosphere mantle, as best exemplified by the Wulong gold deposit.     

Research status of earthquake forecasting in hydraulicfracturing induced earthquakes

In the new types of industrial activities including unconventional energy extraction associated with shale gas and hot dry rock, gas reservoir operations, CO2 geological storage, undergoing research on induced earthquake forecasting has become one of the forward positions of current seismology. As for the intense actual demand, the immature research on induced earthquake forecasting has already been applied in pre-assessment of site safety and seismic hazard and risk management. This work will review systematically recent advances in earthquake forecasting induced by hydraulic fracturing during industrial production from four aspects: earthquake occurrence probability, maximum expected magnitude forecasting, seismic risk analysis for engineering and social applications and key scientific problems. In terms of earthquake occurrence probability, we introduce statistical forecasting models such as an improved ETAS and non-stationary ETAS and physical forecasting models such as Seismogenic Index (SI) and hydro-mechanism nucleation. Research on maximum expected magnitude forecasting has experienced four stages of linear relationship with net injection volume of fluid, power exponential relationship and physical forecasting regarding fault parameters. For seismic risk analysis, we focus on probabilistic seismic hazard assessment and quantitative geological susceptibility model. Furthermore, this review is extended to key scientific problems that contain obtaining accurate fault scale and environmental stress state of reservoir, critical physical process of runaway rupture, complex mechanism of fault activation as well as physical mechanism and modeling of trailing effect. This work in understanding induced earthquake forecasting may contribute to unconventional energy development and production, seismic hazard mitigation, emergency management and scientific research as a reference.     

Three-dimensional distributed DC/IP method for altered tectonite-type gold ore deposits exploration: a case study of the Jiaojia gold metallogenic belt,Eastern China

To develop an effective method to identify ore-controlling faults, we studied the Jiaojia gold metallogenic belt, a most typical altered tectonite-type gold metallogenic belt in the Jiaodong Peninsula, China, and conducted experiments using the 3D distributed direct current-induced polarization (DC/IP) method. Firstly, we tested the ability of using 3D distributed DC/IP method to identify altered tectonite-type gold ore deposits by 3D synthetic modelling. We then collected real data of the Sizhuang gold deposit using the 3D distributed DC/IP method. The resistivity model obtained of this region is generally consistent with the known geological setting. Moreover, to obtain the information about the southern extension of the Jiaojia gold metallogenic belt, we conducted a 3D distributed DC/IP experiment in the Shijia area in the southern segment of the Jiaojia fault. The southern extension of the Jiaojia fault and tectonic evolution of shallow magma in this region were inferred from the 3D resistivity and chargeability models. Based on all the information above, we concluded that the 3D distributed DC/IP method has the advantages of 3D observations, high spatial resolution and great detection depth and will be one of the most effective methods for detecting altered tectonite-type gold ore deposits.     

Summary of technology for a comprehensive geophysical exploration of gold mine in North China Craton

The North China Craton is the oldest continental block, and has suffered from large-scale lithospheric thinning and destruction, which in turn led to gold deposits in northern China. The decratonic gold deposits in the North China Craton became the most important gold deposits in China, and geophysical methods are key means to detect and discover gold deposits there. In this paper, based on the geological and petrophysical characteristics of the North China Craton, the geological model of the decratonic gold deposits is transformed into a geophysical model. At present, two methods of geophysical exploration of decratonic gold deposits are in use: rapid and efficient exploration on the scale of the ore concentration area, and large depth exploration on the scale of the deposit area. In detail, the airborne electromagnetic,magnetic and gravity methods are used to detect the shallow(1,500 m) anomaly area on the scale of the ore concentration area.Through the ground-controlled source electromagnetic and ground magnetotelluric methods, explorations for targets at significant depth(5,000 m) are carried out in the mining area. Then, taking the Liaodong ore concentration area as an example,geophysical methods are used to discover two prospecting areas around the Jianshanzi Fault in the Qingchengzi ore concentration area, Baiyun-Xiaotongjiapuzi deep prospecting area, and Qingchengzi deep prospecting area. Next, three prospecting areas are delineated around the Jixingou Fault in the Wulong mining area, Wulong deep prospecting area, Weishagou deep prospecting area, and Chang'an deep prospecting area. The anomalies in the ore concentration area and mining area are revealed by means of three-dimensional exploration methods, thereby providing technical support for the exploration of metal minerals such as decratonic gold deposits.     

Seismic expression of active extensional faults in northern Umbria (Central Italy)

This paper deals with the geometry and kinematics of the active normal faults in northern Umbria, and their relationship with the seismicity observed in the area. In particular, we illustrate the contribution of seismic reflection data (a network of seismic profiles, NNW–SSE and WSW–ENE trending) in constraining at depth the geometry of the different active fault systems and their reciprocal spatial relationships. The main normal fault in the area is the Alto Tiberina fault, NNW trending and ENE dipping, producing a displacement of about 5 km, and generating a continental basin (Val Tiberina basin), infilled by up to 1500 m with Upper Pliocene–Quaternary deposits. The fault has a staircase trajectory, and can be traced on the seismic profiles to a depth of about 13 km. A set of WSW-dipping, antithetic faults can be recognised on the profiles, the most important of which is the Gubbio fault, bordering an extensional Quaternary basin and interpreted as an active fault based on geological, geomorphologic and seismological evidence. The epicentral distribution of the main historical earthquakes is strictly parallel to the general trend of the normal faults. The focal mechanisms of the major earthquakes show a strong similarity with the attitude of the extensional faults, mapped at the surface and recognised on the seismic profiles. These observations demonstrate the connection between seismicity in the area and the activity of the normal faults. Moreover, the distribution of the instrumental seismicity suggests the activity of the Alto Tiberina fault as the basal detachment for the extensional tectonics of the area. Finally, the action of the Alto Tiberina fault was simulated using two dimensional finite element modelling: a close correspondence between the concentration of shear stresses in the model and the distribution of the present earthquakes was obtained.     

Characteristics of gravity anomalies and prediction of volcanosedimentary boron deposit distribution in the Xiongba area,Tibet

Volcanosedimentary boron deposits are present within Tertiary lacustrine sediments and volcanic rocks in Xiongba, Tibet. Boron deposits are characterized by low density relative to country rocks; thus, it is possible to locate them by gravity measurements. We conducted a 1:50000 high-precision gravity survey in the Xiongba area, Tibet, and obtained the Bouguer and residual gravity anomalies. We analyzed fault systems and the distribution of sedimentary and volcanic rocks and their relation to the volcanosedimentary boron deposits. The processing of the gravity data revealed local gravity variations and fault structures. We applied preferential downward continuation and wavelet transform to the gravity data, and in conjunction with geological data, we predicted the distribution of volcanosedimentary boron deposits.     

地震作用下横断层地质金属成矿带电法找矿成果研究

深部矿产资源勘探是未来勘探的必然趋势.地震作用下的横断层地质构造对金属矿、 能源矿等矿产资源的分布具有重要影响,拥有较大的找矿潜力.对于地震作用下横断层地质等条件复杂的场合,采用高密度电阻率法、 激发极化法和可控源音频大地电磁法等单一电法勘探可能存在找矿效果不佳的问题,有必要研究更为有效的找矿技术方法.首先阐述了激发极化法、CSAMT法等电法勘探的基本内容和各自优缺点;然后,在分析地震作用下横断层地质特征的基础上,研究并提出了基于激发极化法和CSAMT的综合找矿法.基于激发极化法和CSAMT的综合找矿法能有效反映地下地电差异,在大深度范围有效反应地电断面电阻、 极化率参数,互相校正验证;结合已有地质物探资料,推断地下异常,提高横断层的金属矿产勘探效率和效果.将本文的研究成果应用于某横断层地质区域的金属矿勘探实践,取得了良好的勘探效果.实践表明本文所提方法有效、 可行.     

唐山古冶、 滦县地区中小地震活动与构造关系研究

小震活动与断层运动紧密相关, 小震定位技术已逐渐成为地震断层破裂、 发震构造研究中不可或缺的手段。 本文采用双差定位法对唐山地区1978—2011年内发生地震进行重新定位, 以地震学与构造地质学为理论基础, 着眼于唐山地震构造系统与滦县地震构造系统的交汇区, 对连续、 丰富的地震数据进行时间、 空间综合分析, 发现古冶东侧出现一条新生地震带。 开滦煤矿地质资料证实了该新生地震带展布与徐家楼—王喜庄基岩断层完全重合, 推测2010年M_S4.2地震与2012年M_S4.8地震均由徐家楼—王喜庄断层活动引起, 应加强该区地震监测工作。     

安徽省霍山县东溪-南关岭金矿地质特征与成矿条件

东溪-南关岭金矿为北淮阳东段发现的第一个原生金矿,产于磨子潭-晓天中生代火山盆地边缘,容矿围岩为安山质-英安质火山岩,矿化和蚀变受桐柏-桐城深大断裂带的次级构造带控制。该金矿发育陡倾斜的脉状矿体和缓倾斜的似层状矿体,成因类型为冰长石-绢云母型浅成低温热液金矿。火山岩盆地之下的变质基底可能起到了初始矿源层作用,桐柏-桐城断裂带及其次级构造破碎带为重要的导岩导矿构造,早白垩世强烈的岩浆活动提供了热源、动力源和部分矿源。参照国内外类似金矿的特征,认为本区成矿地质条件良好,有可能隐伏着与石英正长岩体有关的细脉浸染型矿化,晓天火山盆地具有良好的找矿前景。     

Targeting of Gold Deposits in Amazonian Exploration Frontiers using Knowledge- and Data-Driven Spatial Modeling of Geophysical,Geochemical, and Geological Data

This paper reports the application of weights-of-evidence, artificial neural networks, and fuzzy logic spatial modeling techniques to generate prospectivity maps for gold mineralization in the neighborhood of the Amapari Au mine, Brazil. The study area comprises one of the last Brazilian mineral exploration frontiers. The Amapari mine is located in the Maroni-Itaicaiúnas Province, which regionally hosts important gold, iron, manganese, chromite, diamond, bauxite, kaolinite, and cassiterite deposits. The Amapari Au mine is characterized as of the orogenic gold deposit type. The highest gold grades are associated with highly deformed rocks and are concentrated in sulfide-rich veins mainly composed of pyrrhotite. The data used for the generation of gold prospectivity models include aerogeophysical and geological maps as well as the gold content of stream sediment samples. The prospectivity maps provided by these three methods showed that the Amapari mine stands out as an area of high potential for gold mineralization. The prospectivity maps also highlight new targets for gold exploration. These new targets were validated by means of detailed maps of gold geochemical anomalies in soil and by fieldwork. The identified target areas exhibit good spatial coincidence with the main soil geochemical anomalies and prospects, thus demonstrating that the delineation of exploration targets by analysis and integration of indirect datasets in a geographic information system (GIS) is consistent with direct prospecting. Considering that work of this nature has never been developed in the Amazonian region, this is an important example of the applicability and functionality of geophysical data and prospectivity analysis in regions where geologic and metallogenetic information is scarce.     

Geochemistry of ore-forming fluids and geological significance

The Kuoerzhenkuola gold field (including the Kuoerzhenkuola and the Buerkesidai gold deposits) is the most important one in the Sawuer gold belt, northern Xinjiang, China. Isotopic studies including D, O, He, C, S, Pb and Sr reveal that the ore-forming fluids of the Kuoerzhenkuola and the Buerkesidai deposits shared the same source: the water of ore fluids was magmatic water and minor meteoric water; the mineralizers and ore materials derived mainly from mantle beneath the island arc, and partially from crust. The ore-forming fluids of two deposits are a mixture of mantle-derived fluids incorporated by crust-derived fluid, and meteoric water. Based on these results, combined with the consideration of the tectonic setting and geological features, we suggest that the two gold deposits in the Kuoerzhenkuola gold field, Sawur gold belt share the same genesis, and are volcanogenic hydrothermal gold deposits occurring in the same caldera.     

Pattern Dynamics and Forecast Methods in Seismically Active Regions

—Large, extended fault systems such as those in California demonstrate complex space-time seismicity patterns, which include repetitive events, precursory activity and quiescence, and aftershock sequences. Although the characteristics of these patterns can be qualitatively described, a systematic quantitative analysis remains elusive. Our research suggests that a new pattern dynamics methodology can be used to define a unique, finite set of seismicity patterns for a given fault system. In addition, while a long-sought goal of earthquake research has been the reliable forecasting of these events, very little progress has been made in developing a successful, consistent methodology. In this report, we document the discovery of systematic space-time variations in seismicity from southern California using a new technique. Here we present examples of this analysis technique on data obtained prior to events in seismically active areas that show coherent regions associated with the future occurrence of major earthquakes in the same areas. These results strongly support the hypothesis that seismic activity is highly correlated across many space and time scales within large volumes of the earth's crust.     

~(40)Ar/~(39)Ar and Rb-Sr isochron dating of the gold deposits on northern margin of the Jiaolai Basin,Shandong,China

The Shandong Peninsula (Jiaodong) is a very important gold producer of China. Over ten large and super-large quartz-vein type and shear zone-type gold deposits related to Yanshannian granite intrusions have been exploited in the northern part of the Jiaod…     

多尺度综合地球物理探测:揭示成矿系统、助力深部找矿——长江中下游深部探测(SinoProbe-03)进展

两个原因使我们必须开展深部探测.一是寻找深部资源,二是更好地理解形成和控制陆内成矿的深部动力学过程,预测新的矿集区.在深部探测专项、国家自然科学基金和地质调查项目资助下,作者在长江中下游成矿带及邻区开展了系统的多尺度、综合地球物理探测.包括:成矿带尺度的宽频地震探测及"廊带式"综合探测,矿集区尺度的骨干剖面探测和三维建模,矿田尺度的三维探测与反演模拟.探测结果在三个层次取得了一系列新认识和新发现,完善了相关探测方法技术.主要包括:揭示了成矿带岩石圈结构、深部过程及对成岩、成矿的控制,提出了成矿带形成的动力学模型,诠释了在狭窄的成矿带内形成大规模金属堆积的深部因素;揭示了典型矿集区地壳三维结构、组成和断裂分布,建立了矿集区三维结构模型和区域成矿模式,推断了主要控矿岩体、地层的空间展布,预测了新的找矿靶区;开展了"玢岩型"、斑岩型和热液型多金属矿床综合地球物理探测试验,总结了勘查模式,预测了深边部找矿靶区;提出了硬岩区反射地震数据采集设计、激发到接收的有效措施,探索了地震弱信号提取、噪声压制、静校正和偏移等处理新技术、新方法;提出了强电磁干扰区电磁去噪的数字形态滤波等技术,完善了二/三维带地形和考虑各向异性情况的电磁正反演技术.     

Conditions and processes leading to large-scale gold deposition in the Jiaodong province,eastern China

The gold deposits in the Jiaodong Peninsula constitute the largest gold mineralized province in China. The mineralization shows common characteristics in their tectonic setting, ore-forming fluid and metallogenic system. Sulfidation and fluid immiscibility are two important mechanisms controlling gold precipitation, both of which consume sulfur in the oreforming fluids. The escape of H_2S from the main ore-forming fluids and the decrease of total sulfur concentration not only lead to the efficient precipitation of gold, but also result in the crystallization of reducing minerals such as pyrrhotite and oxidizing minerals such as magnetite. Quartz solubility shows strong dependence on temperature, pressure, and CO_2 content. The dependence of quartz solubility on pressure is weak at low temperatures, and progressively stronger at higher temperatures.Similarly, the temperature dependence of quartz solubility is relatively low at low pressures, but becomes gradually stronger at high pressures. The results of solubility modeling can constrain the dissolution and reprecipitation behavior of quartz in the oreforming veins and the formation mechanism of different types of quartz veins. The multi-stage mineralization fluid activity resulted in the complex dissolution structure of quartz in the Jiaodong gold veins. Pyrite in the main metallogenic period in the Jiaodong gold deposits shows complex microstructure characteristics at single crystal scale. The trace elements(mainly the coupling of As-and Au-rich belt) and sulfur isotope composition also display a certain regularity. The As-rich fluids might have formed by the initial pulse of ore-forming fluids through As-rich metasedimentary strata, while the As-Au oscillation zone at the margin of pyrite grains is related to the pressure fluctuation caused by fault activity and the local phase separation of fluids. There is a temporal and spatial evolution of gold fineness in the Jiaodong gold deposits. Water/rock reaction(sulfidation) was the main ore-forming mechanism of early gold mineralization, forming relatively high fineness gold, while significant pressure drop in the shallow part accompanied by fluid phase separation promoted the late gold mineralization, forming low fineness gold. Under cratonic destruction setting, dehydration of the amphibolite and granulite facies metamorphic lower-crust resulted in the formation of Au-CO_2-rich ore-forming fluids, which rose along the deep fault and secondary structure, and formed the largescale fault-controlled gold deposits in Jiaodong.     

Metallogenesis of the Ertix gold belt, Xinjiang and its relationship to Central Asia-type orogenesis

The Ertix gold belt is located on the boundary of the Kalatongke arc and the Kelan back-arc basin of D-C1. Most scholars used to interpret the formation and distribution of the gold deposits in the Ertix tectonic belt in terms of the petrogenic and metallogenic models for active continental margins. However, enormous data of isotopic dating and geologic research show that the mineralization was obviously later than the oceanic subduction, whereas exactly simultaneous with the collisional orogenesis during C₂-P, especially at the transition stage from collisional compression to extension. Based on study of metallogenic time, tectonic background, ore geology, ore fluid nature, ore material source, etc., we reveal that all the gold deposits possess the character of orogenic deposits formed in collisional orogenic system, and that their ore-forming materials mainly have derived from the stratigraphic terranes south to individual deposits. Accordingly, the theoretical tectonic model for collisional metallogenesis and petrogenesis is employed to explain the formation of the Ertix gold belt and to determine the gold exploration directions.     

40Ar/39Ar and Rb-Sr isochron dating of the gold deposits on northern margin of the Jiaolai Basin, Shandong, China

The Pengjiakuang, Dazhuangzi and Fayunkuang gold deposits, located on the northern margin of the Mesozoic Jiaolai Basin, east of Shandong Province, are controlled by a low-angle normal fault. Gold ores are typically brecciated, veinlet and disseminated. The Ar-Ar and Rb-Sr isochron dating methods were adopted to date ores and lamprophyre dike. The results indicate that the age of the Pengjiakuang gold deposit is 117.33–118.42 Ma, that of the Dazhuangzi gold deposit is 117.39 Ma, and that of the Fayunkuang gold deposit is (128.49±7.2) Ma. The consistency in metallogenic age between the gold deposits on the margin of the Jiaolai Basin and the gold deposits (115–126 Ma) of the northern uplift area suggests that both were formed in the same metallogenic period. That is to say, the large-scale metallogeny of the Jiaodong region took place in late-Yanshannian ((120±10) Ma).