Near-Real–Time GPS-Based Orbit Determination and Sea Surface Height Observations from the Jason-1 Mission Special Issue: Jason-1 Calibration/Validation

The Jason-1 Operational Sensor Data Record (OSDR) is intended as a wind and wave product that is aimed towards near-real–time (NRT) meteorological applications. However, the OSDR provides most of the information that is required to determine altimetric sea surface heights in NRT. The exceptions include a sufficiently accurate orbit altitude, and pressure fields to determine the dry troposphere path delay correction. An orbit altitude field is provided on the OSDR but has accuracies that range between 8–25 cm (RMS). However, tracking data from the on-board BlackJack GPS receiver are available with sufficiently short latency for use in the computation of NRT GPS-based orbit solutions. The orbit altitudes from these NRT orbit solutions have typical accuracies of < 3.0 cm (RMS) with a latency of 1–3 h, and < 2.5 cm (RMS) with a latency of 3–5 h. Meanwhile, forecast global pressure fields from the National Center for Environmental Prediction (NCEP) are available for the NRT computation of the dry troposphere correction. In combination, the Jason-1 OSDR, the NRT GPS-based orbit solutions, and the NCEP pressure fields can be used to compute sea surface height observations from the Jason-1 mission with typical latencies of 3–5 h, and have differences with those from the 2–3 day latency Interim Geophysical Data Records of < 5 cm (RMS). The NRT altimetric sea surface height observations are potentially of benefit to forecasting, tactical oceanography, and natural hazard monitoring.     

基于卡尔曼滤波的INS／USBL水下导航系统模型研究

简述惯性导航技术(INS)和超短基线定位技术(USBL),并分析了各自的优缺点.为了满足深海作业对导航定位高精度、高数据更新率的技术需求,提出基于卡尔曼滤波技术(Kalman Filter)实现INS和USBL的融合集成,研究了系统模型,进行了水下定位试验,给出了误差分析结果,证明了模型的可靠性.     

GNSS/INS组合导航系统中异常观测的探测与抑制

在隧道、城市峡谷、多径效应明显等恶劣环境中,GNSS定位结果易受异常值影响。GNSS异常值的存在使得观测噪声服从Gauss分布的假设不再成立,从而将严重影响GNSS/INS组合系统中Kalman滤波的性能。本文将抗差Kalman滤波用于GNSS/INS组合导航系统中异常观测的探测与抑制。根据设定的显著性水平对Kalman滤波的新息向量进行c2检验,原假设被拒绝时认为异常观测存在;然后引入尺度化因子对新息向量的协方差矩阵进行膨胀,以抑制异常观测对滤波结果的影响,并通过解析方法求解该因子。数值仿真的结果验证了算法的有效性。     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay： Calibration on Design Factors

For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors...     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay： Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design.However,the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated.This paper presents an approach for its calibration,and suggests many kinds of associated load cases.The uncertainties of loads and structural resistance are mainly investigated.The target reliability index for structural components,tubular joints and piles of offshore jacket platforms are discussed respectively in detail.Finally,through the calibrated results from the offshore jacket platforms of QK18-1,JZ20-2,SZ36-1 and BZ28-1 in the Bohai Bay,it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period.The results provide significant reference for the design of offshore jacket platforms.     

Echo characters and recent sedimentary processes as indicated by high-resolution sub-bottom profiling in Ría de Vigo (NW Spain)

A detailed study of high-resolution (3.5 kHz) sub-bottom profiles reveals the presence of 17 different types of echo character (acoustic facies) in the recent sedimentary infill of the shallow Ría de Vigo (NW Spain). By correlating the echo character with surface sediments, we have been able to infer the recent sediment dynamics in the ría seafloor, 60.5% being related to modern depositional processes. In the outer ría area, where wave activity is strong, erosive and high-energy depositional processes dominate, whereas in the protected area of the inner ría the majority of recent processes are low-energy depositional, progradational and/or a combination of both.     

An Ocean CAL-VAL Site at Kavaratti in Lakshadweep for Vicarious Calibration of OCM-2 and Validation of Geophysical Products—Development and Operationalization

A pair of buoys (system), MET and OPTICAL, consisting of fully automated hyperspectral radiometers, fluorometer, and meteorological sensors, has been realized and deployed in deep ocean case-I site at Kavaratti in Lakshadweep, Arabian Sea, for preprogrammed in situ data collection and transmission via INSAT-3C satellite. The buoy of described configuration is capable of measuring in-water optical and biological parameters in an unattended manner for long-term time series with less vertical tilt. A robotic sun/sky photometer installed on Kavaratti Island simultaneously provides information on aerosols over the site. A combination of these parameters available hourly in real time throughout the day from unattended systems in the ocean as well as on island provides an ideal reference site. The paper reports recent collection of bio-optical marine observations over the site and use of the data for OCM-2 vicarious calibration and validation of geophysical products.     

Hydrodynamic analysis of three–unit arrays of floating annular oscillating–water–column wave energy converters

This paper deals with the hydrodynamic analysis of an array of Oscillating Water Column (OWC) devices, made up of coaxial cylinders, which are floating either independently or as a unit forming a floating platform. The platform is considered either free – floating or as TLP configuration connected to the sea bottom. Numerical results concerning the three boundary value problems, namely, the diffraction, the motion – and the pressure – dependent radiation ones are given. They have been obtained through an analytical solution method using matched axisymmetric eigenfunction expansion formulations. In all cases the interaction phenomena with neighbouring bodies have been taken properly into account using the physical idea of multiple scattering. Numerical results for the first – and the mean second – order wave forces, the hydrodynamic interaction coefficients along with pressure hydrodynamic parameters, inner air pressure and free–surface oscillation amplitude inside and outside of each device are parametrically evaluated and supplemented by experimental data.     

Calibration of LRFD Format for Steel Jacket Offshore Platform in China Offshore Area （2） ： Load, Resistance and Load Combination Factors

1.IntroductionLoad and Resistance Factor Design(LRFD)isthe commonly adoptedreliability-based designfor-mat for structural design(CNE,1990;AAHTO,1994;OMTC,1983;CMC,1984).Code calibra-tionforthe LRFDformat is a processto determinethetarget reliability by de…     

孟加拉湾海域背景流–中尺度涡–高频扰动之间的相互作用

基于一套涡分辨模式数据,本文利用一种新的泛函工具—多尺度子空间变换—将孟加拉湾（BOB）海域的环流系统分解到背景流（>96 d）、中尺度（24～96 d）和高频尺度（<24 d）3个子空间,并用正则传输理论探讨了3个尺度子空间之间内在的非线性相互作用。结果表明,BOB西北部边界和斯里兰卡岛东部是BOB海域多尺度相互作用最显著的区域,中部则较弱。前两个区域的背景流大多正压、斜压不稳定,动能和有效位能正则传输主要表现为正向级串;后者则以逆尺度动能级串为主。具体来说,在BOB西北部与斯里兰卡东部,中尺度涡动能（EKE）主要来源于正压能量路径（即背景流动能向EKE传输）,其次来源于斜压能量路径（即背景流有效位能向中尺度有效位能传输,并进一步转换为EKE）。通过这两个能量路径得到的EKE向更高频的扰动传输能量,起到了耗散中尺度涡的作用。不同于此二者,BOB中部海域的EKE和高频尺度动能主要通过斜压路径获得,随后通过逆尺度级串将动能返还给背景流。苏门答腊岛的西北部也是中尺度和高频尺度扰动较强的海域,正压能量路径和斜压能量路径均是该海域扰动能的来源,但以斜压能量路径为主。     

Hydrological characteristics in the Tunisia–Sardinia–Sicily area during spring 1995

Within the framework of the Tunisian – EC SALTO/AVICENNE project, four hydrological sections were performed between Tunisia, Sardinia and Sicily with a 10–20 km sampling interval in April–June 1995. To our knowledge, it is the first time that sections were repeated there at such a high frequency. These data significantly increase the number of observations available on the Tunisian side of the Channels of Sardinia and Sicily, and allow reliable specification of the hydrological characteristics of the area. For the first time, and as confirmed by infrared satellite images, these data sets show (i) the large mesoscale variability of the surface flow entering the study area, as expected from the characteristics of the Algerian Current upstream, (ii) the rapid changes it undergoes around northeastern Tunisia, as it shifts roughly from southward to eastward within less than a few weeks. These data also show a large heterogeneity at intermediate levels, clearly associated with waters of very different origins that follow converging routes and mix in both the study area and the southern Tyrrhenian Sea. They finally document the fundamental importance of bathymetric features of relatively small scale such as the Skerki passage.     

Effect of sulphates and curing period on stress–strain curves and failure modes of soil–lime–natural pozzolana mixtures

Abstract

An experimental investigation was undertaken in order to assess the effect of sodium (Na₂SO₄) and calcium (CaSO₄·2H₂O) sulphates and curing period on stress–strain curves and failure modes of grey (GS) and red (RS) clayey soils stabilised by lime (L), natural pozzolana (NP) and their combinations (L–NP). Several soil–L–NP mixtures were studied to be used as subgrade soils for road pavements. Stress–strain curves were obtained from unconfined compressive strength (UCS) test made on several soil–L–NP specimens after curing for 7 and 120 days. Tests results showed that the use of L or L–NP without sulphates produced a significant increase in peaks stress of both clayey soils and then modified their stress–strain curves from nonlinear to linear behaviour almost up to 70% of peak stress after a longer curing period. However, the presence of 2% Na₂SO₄ or any CaSO₄·2H₂O content provided beneficial effects on peaks stress and stress–strain curves of both stabilised clayey soils and then improved their linearity almost up to 95% of peak stress after curing for 120 days. In contrast, the presence of 6% Na₂SO₄ caused undesirable effects. In addition, both sulphates greatly affected the failure modes of soil–L–NP specimens, particularly at a later stage.     

Studies on the Adelie penguin at cape Royds 1964–65 and 1965–66

The adult population of the colony, egg sizes, incubation watches, and egg and chick mortality are considered for the 1964–65 and 1965–66 breeding seasons. In 1964–65 1,051 breeding pairs were recorded and 1,467 chicks survived to leave the colony: this represents 67.5% of eggs laid. In 1965–66 1,186 breeding pairs successfully reared 1,390 chicks: 57.0% of eggs laid. Egg and chick mortality over four breeding seasons is considered, with special reference to ice conditions in McMurdo Sound. Dimensions of 349 eggs are given, including those for clutches produced by 33 known females in successive seasons. Breeding success of known pairs of birds is discussed. Birds breeding for the first time appear to lay a single, small egg and to be unsuccessful; experienced breeders which change their mate are usually unsuccessful. Observations are made on chick plumage and panting. A prone sleeping posture in which the bill is directed towards the axilla is described and illustrated. Some observations on the South Polar Skua are recorded.     

Late Mesozoic–Cenozoic sedimentary basins of active continental margin of Southeast Russia: paleogeography,tectonics, and coal–oil–gas presence

Various settings took place during the Late Mesozoic: divergent, convergent, collisional, and transform. After mid-Jurassic collision of the Siberian and Chinese cratons, a latitudinal system of post-collision troughs developed along the Mongol-Okhotsk suture (the Uda, Torom basins and others), filled with terrigenous coal-bearing molasse.The dispersion of Pangea, creation of oceans during the Late Jurassic are correlated to the emergence of the East Asian submeridional rift system with volcano-terrigenous coal-bearing deposits (the Amur-Zeya basin). At that time, to the east there existed an Andean-type continental margin. Foreland (Upper Bureya, Partizansk, and Razdolny) and flexural (Sangjiang-Middle Amur) basins were formed along the margin of the rigid massifs during the Late Jurassic to Berriasian.During the Valanginian-mid-Albian an oblique subduction of the Izanagi plate beneath the Asian continent occurred, producing a transform margin type, considerable sinistral strike slip displacements, and formation of pull-apart basins filled with turbidites (the Sangjiang-Middle Amur basin).The Aptian is characterized by plate reorganization and formation of epioceanic island arcs, fore-arc and back-arc basins in Sakhalin and the Sikhote-Alin (the Alchan and Sangjiang-Middle Amur basins), filled with volcanoclastics.During the mid-Albian a series of terranes accreted to the Asian continental margin. By the end of the Albian, the East Asian marginal volcanic belt began to form due to the subduction of the Kula plate beneath the Asian continent. During the Cenomanian–Coniacian shallow marine coarse clastics accumulated in the fore-arc basins, which were followed by continental deposits in the Santonian–Campanian. From the Coniacian to the Maastrichtian, a thermal subsidence started in rift basins, and continental oil-bearing clastics accumulated (the Amur-Zeya basin).Widespread elevation and denudation were dominant during the Maastrichtian. This is evidenced by thick sediments accumulated in the Western Sakhalin fore-arc basin.During the Cenozoic, an extensive rift belt rmade up of a system of grabens, which were filled with lacustrine–alluvial coal–and oil-bearing deposits, developed along the East Asian margin.     

Mechanistic Drifting Forecast Model for A Small Semi-Submersible Drifter Under Tide–Wind–Wave Conditions

Understanding the drifting motion of a small semi-submersible drifter is of vital importance regarding monitoring surface currents and the floating pollutants in coastal regions. This work addresses this issue by establishing a mechanistic drifting forecast model based on kinetic analysis. Taking tide–wind–wave into consideration, the forecast model is validated against in situ drifting experiment in the Radial Sand Ridges. Model results show good performance with respect to the measured drifting features, characterized by migrating back and forth twice a day with daily downwind displacements. Trajectory models are used to evaluate the influence of the individual hydrodynamic forcing. The tidal current is the fundamental dynamic condition in the Radial Sand Ridges and has the greatest impact on the drifting distance. However, it loses its leading position in the field of the daily displacement of the used drifter. The simulations reveal that different hydrodynamic forces dominate the daily displacement of the used drifter at different wind scales. The wave-induced mass transport has the greatest influence on the daily displacement at Beaufort wind scale 5–6; while wind drag contributes mostly at wind scale 2–4.     

Dynamic Response of Sea-Crossing Rail-cum-Road Cable-Stayed Bridge Influenced by Random Wind–Wave–Undercurrent Coupling

Sea-crossing bridges are affected by random wind–wave–undercurrent coupling loads, due to the complex marine environment. The dynamic response of long-span Rail-cum-Road cable-stayed bridges is particularly severe under their influence, potentially leading to safety problems. In this paper, a fluid–structure separation solution method is implemented using Ansys–Midas co-simulation, in order to solve the above issues effectively while using less computational resources. The feasibility of the met...     

Russian Climate Research in 2015–2018

Izvestiya, Atmospheric and Oceanic Physics - The results of Russian studies of climate and its changes (published in 2015–2018) are presented using a review prepared for the National Report...     

The Guinea-Bissau–Senegal maritime boundary dispute

This article discusses the role of negotiation, arbitration, and that of the International Court of Justice (ICJ) in resolving maritime boundary disputes in the Gulf of Guinea region. Primarily using the cases of Guinea-Bissau and Senegal, the paper highlights that joint maritime development agreements could be a better option for resolving existing maritime boundary disputes in the region rather than outright delimitation requests.