The earthquake of 6 September 2002 and the seismic history of Palermo (Northern Sicily,Italy): Implications for the seismic hazard assessment of the city

On September 6, 2002, a M_L = 5.6 earthquake, occurring some tens of kilometres offshore from the Northern Sicilian coast (Southern Tyrrhenian Sea), slightly damaged the city of Palermo and surroundings (degree 6 in the European Macroseismic Scale 1998). The macroseismic investigation of the shock and a detailed study of effects of the main earthquakes which affected Palermo in the past have been performed in order to evaluate the seismic response of the city. Moreover, the comparison of the recent event, which is instrumentally constrained, with historical earthquakes allows us to infer new insights on the seismogenic sources of the area, that seem located offshore in the Tyrrhenian sea.In the last 500 years, Palermo has never been completely destroyed but has suffered effects estimated between intensities 6 and 8 EMS-98 many times (1693, 1726, 1751, 1823, 1940, 1968, 2002). The damage scenarios of the analysed events have shown that damage distribution is strongly conditioned by soil response in the different parts of the city and by a high building vulnerability, mainly in the historical centre and in the south-eastern zone of the modern city. As a matter of fact, Palermo has always suffered greater effects than those reported for other nearby localities. The hazard assessment obtained using observed site intensities has shown that the probability of occurrence for intensity 8 (the strongest intensity observed in Palermo) exceeds 99% for 550 years, while the estimated mean return period is 152 ± 40 years. These results, in connection with building vulnerability due to the urban expansion before the introduction of seismic code, suggest that the city is exposed to a relatively high seismic risk.This paper has not been submitted elsewhere in identical or similar form, nor will it be during the first 3 months after its submission to Journal of Seismology.     

Integration of 3D large‐scale earthquake simulations into the assessment of the seismic risk of Bogota,Colombia

Bogotá, the capital city of Colombia, is mostly located on a lacustrine soil deposit surrounded by hills in a central plateau of the eastern cordillera of the Colombian Andes. This highly populated urban area is exposed to a significant seismic hazard from local and regional fault systems. In addition, the potential ground motion amplification during earthquakes due to the presence of soft soil deposits, along with the effects of the surface and subsurface topography, can strongly influence the seismic hazard and consequently the seismic risk to the city. This study aims to develop a physics‐based framework to generate synthetic ground records that can help better understand the seismic response of the basin and other amplification effects during strong earthquake shaking in the region, and to incorporate these effects into the estimation of seismic risk. To this end, a set of simulations were first conducted on Hercules, the wave propagation octree‐based finite element simulator developed by the Quake Group at Carnegie Mellon University, to identify the impacts of hypothetical strong earthquakes scenarios. Then, the results from these simulations were integrated with the exposure and vulnerability information previously developed for the main building constructions in the city to assess the seismic risk in the region under different conditions of analysis. Results from this more detailed model are compared with previously published results from simplified models. Sensitivity analyses help identify critical aspects that should be considered in the future to improve the seismic risk assessment of infrastructure.     

Seismogenic potential and earthquake hazard assessment in the Tell Atlas of Algeria

Seismotectonic zonation studies in the Tell Atlas of Algeria, a branch of the Africa-Eurasia plate boundary, provide a valuable input for deterministic seismic hazard calculations. We delineate a number of seismogenic zones from causal relationships established between geological structures and earthquakes and compile a working seismic catalogue mainly from readily available sources. To this catalogue, for a most rational and best-justified hazard analysis, we add estimates of earthquake size translated from active faulting characteristics. We assess the regional seismic hazard using a deterministic procedure based on the computation of complete synthetic seismograms (up to 1 Hz) by the modal summation technique. As a result, we generate seismic hazard maps of maximum velocity, maximum displacement, and design ground acceleration that blend information from geology, historical seismicity and observational seismology, leading to better estimates of the earthquake hazard throughout northern Algeria. Our analysis and the resulting maps illustrate how different the estimate of seismic hazard is based primarily on combined geologic and seismological data with respect to the one for which only information from earthquake catalogues has been used.     

The seismic microzonation of the city of Catania (Italy) for the maximum expected scenario earthquake of January 11, 1693

Safety against earthquake hazards presents two aspects: structural safety against potentially destructive dynamic forces and site safety related to geotechnical phenomena, such as amplification, landsliding and soil liquefaction. The correct evaluation of seismic hazard is, therefore, highly affected by risk factors due to geological nature and geotechnical properties of soils. In response to these new developments, several attempts have been made to identify and appraise geotechnical hazards and to represent them in the form of zoning maps, in which locations or zones with different levels of hazard potential are identified. The geotechnical zonation of the subsoil of the city of Catania (Italy) suggests a high vulnerability of the physical environment added to site amplification of the ground motion phenomena. The ground response analysis at the surface, in terms of time history and response spectra, has been obtained by some 1D equivalent linear models and by a 2D linear model, using a design scenario earthquake as input at the conventional bedrock. In particular, the study has regarded the evaluation of site effects in correspondence of the database of about 1200 boreholes and water-wells available in the data-bank of the Catania area. According to the response spectra obtained through the application of the 1D and 2D models, the city of Catania has been divided into some zones with different peak ground acceleration at the surface, to which corresponds a different value of the Seismic Geotechnical Hazard. A seismic microzoning map of the urban area of the city of Catania has been obtained. The map represents an important tool for the seismic improvement of the buildings, indispensable for the mitigation of the seismic risk.     

The road map for seismic risk analysis in a Mediterranean city

The seismic risk analysis evaluation in the Mediterranean area is one of the main tasks for the preservation of Cultural Heritage and for the sustainable development of Mediterranean cities. The Mediterranean area is characterised by a medium–high level of seismic risk, so that earthquakes are the major cause for the destruction of monuments, residential and industrial buildings. A case history regarding the seismic risk analysis for the city of Catania (Italy) is presented, since the city has been heavy damaged in the past by strong earthquakes such as the 1169 earthquake (XI MCS), the 1542 earthquake (IX MCS), the 1693 earthquake (XI MCS) and the 1818 earthquake (VIII MCS) etc., which caused several thousands of deaths. Fault modelling, attenuation laws, synthetic accelerograms, recorded accelerograms and site effects are considered for the evaluation of the seismic action. Vulnerability of physical environment, related to the presence of cavities and to seismic-induced landslides and liquefaction has been analysed, with special reference to the new modelling of such phenomena and to the application of models to given areas. Soil–structure Interaction has been analysed for some geotechnical works, such as shallow foundation and retaining wall, by means of physical and numerical modelling. The paper deals with the vulnerability of physical environment (landslides, liquefaction, etc.), while the road map continues with the analysis of vulnerability of monuments and buildings, with the aim of the estimation of the seismic resistance required to defend against the seismic action given by the scenario earthquake. For the mitigation of seismic risk, structural improvements of R.C. buildings with different methodology and techniques have been analysed, as well as the guideline for the strengthening of buildings. The work shows that the seismic risk of the city is not a summation of the seismic risk of each building, because the vulnerability of the urban system plays an important role on the seismic risk evaluation of a given city. To this aim the vulnerability of the road infrastructures, lifelines, and urban framework have been also analysed in the project.     

Seismic hazard assessment of Tehran,Iran with emphasis on near-fault rupture directivity effects

Many destructive earthquakes happened in Tehran, Iran in the last centuries. The existence of active faults like the North Tehran is the main cause of seismicity in this city. According to past investigations, it is estimated that in the scenario of activation of the North Tehran fault, many structures in Tehran will collapse. Therefore, it is necessary to incorporate the near field rupture directivity effects of this fault into the seismic hazard assessment of important sites in Tehran. In this study, using calculations coded in MATLAB,Probabilistic Seismic Hazard Analysis(PSHA) is conducted for an important site in Tehran. Following that, deaggregation technique is performed on PSHA and the contribution of seismic scenarios to hazard is obtained in the range of distance and magnitude. After identifying the North Tehran fault as the most hazardous source affecting the site in 10000-year return period, rupture directivity effects of this fault is incorporated into the seismic hazard assessment using Somerville et al.(1997) model with broadband approach and Shahi and Baker(2011) model with narrowband approach. The results show that the narrowband approach caused a 27% increase in the peak of response spectrum in 10000-year return period compared with the conventional PSHA. Therefore, it is necessary to incorporate the near fault rupture directivity effects into the higher levels of seismic hazard assessment attributed to important sites.     

Spectral characteristics of the seismic hazard between the alps and the dinarides

Empirical correlations between response spectra, magnitude, distance from the source and geological site conditions are introduced in a regional study of seismic hazard. A 350-year earthquake catalogue is treated by means of the statistics of extremes and both the spectral amplitudes (pseudovelocity) corresponding to a series of frequency bands are separately mapped, and the complete predicted response spectra calculated at some sites. Three kinds of geological site conditions are considered: thick and thin (less than 20 m deep) alluvium, and rock. A particular dependence of the results on the geographical distribution of earthquakes and on their magnitudes is commented. The seismic hazard of the study area is also computed by applying a traditional regression between peak ground velocity, magnitude and distance; a comparison with the seismic hazard given by the frequency dependent psuedovelocity indicates the extent of the uncertainty associated with the common practice of scaling response spectra directly from ground motion parameters.     

Site response estimation and ground motion spectrum scenario in the Catania area

A realistic definition of seismic input for the Catania area is obtained using advanced modeling techniques that allow us the computation of synthetic seismograms, containing body and surface waves. With the modal summation technique, extended to laterally heterogeneous anelastic structural models, we create a database of synthetic signals which can be used for the study of the local response in a set of selected sites located within the Catania area. We propose a ground shaking scenario corresponding to a source spectrum of an earthquake that mimics the destructive event that occurred on 11 January 1693. Making use of the simplified geotechnical map for the Catania area, we produce maps which illustrate the spatial variability of the SH waveforms over the entire area. Using the detailed geological and geotechnical information along a selected cross section, we study the site response to the SH and P-SV motion in a very realistic case, adopting and comparing different estimation techniques.     

Modelling Seismic Hazard in Earthquake Loss Models with Spatially Distributed Exposure

The prediction of possible future losses from earthquakes, which in many cases affect structures that are spatially distributed over a wide area, is of importance to national authorities, local governments, and the insurance and reinsurance industries. Generally, it is necessary to estimate the effects of many, or even all, potential earthquake scenarios that could impact upon these urban areas. In such cases, the purpose of the loss calculations is to estimate the annual frequency of exceedance (or the return period) of different levels of loss due to earthquakes: so-called loss exceedance curves. An attractive option for generating loss exceedance curves is to perform independent probabilistic seismic hazard assessment calculations at several locations simultaneously and to combine the losses at each site for each annual frequency of exceedance. An alternative method involves the use of multiple earthquake scenarios to generate ground motions at all sites of interest, defined through Monte–Carlo simulations based on the seismicity model. The latter procedure is conceptually sounder but considerably more time-consuming. Both procedures are applied to a case study loss model and the loss exceedance curves and average annual losses are compared to ascertain the influence of using a more theoretically robust, though computationally intensive, procedure to represent the seismic hazard in loss modelling.An erratum to this article can be found at     

Probabilistic seismic hazard assessment in SE-Spain based on macroseismic site histories

In many countries such as Spain earthquake databases still mainly comprise macroseismic data from felt effects. The full exploit of this information is of basic importance for seismic risk assessment and emergency planning, given the strict link between macroseismic intensity and damage. A probabilistic procedure specifically developed to handle macroseismic data, mostly relying on site information and seismogenic-source free, has been applied to evaluate seismic hazard in SE-Spain (Alicante-Murcia region). Present seismicity is moderate-low with largest magnitudes slightly over Mw5.0. The historical record includes very destructive earthquakes, maximum EMS98 intensities reaching IX–X and X in the nineteenth century (e.g., Torrevieja 1829 earthquake). Very recently, two events in the area on 11 May 2011 (Mw4.5, Mw5.2) killed nine people, injured 300, and produced important damage in the city of Lorca. Regional hazard maps for the area together with specific hazard curves at selected localities are obtained. Results are compared with the maximum observed intensities in the period 1300–2012, and with the values in the seismic hazard map from the Spanish Building Code in force. In general, the maximum felt intensity values are closer to the hazard values calculated for 2 % probability of exceedance in 50 years, using felt and expected intensity. The intensity-based probabilistic hazard maps obtained through the applied approach reduce the inherent smoothing of those based on standard probabilistic seismic hazard assessment approaches for the region, allowing identifying possible over- or sub-estimates of site hazard values, providing very valuable information for risk reduction strategies or for future updates of the building code hazard maps.     

基于复杂网络的建筑物强震下抗毁性估计模型

城市所处的地震危险性环境和城市建筑物的易损性是影响复杂网络建筑物强震环境下抗毁能力的关键因素。由于现阶段对建筑物抗震抗毁能力的评定仍存在一定困难,对建筑物震害程度测评只能通过强震之后建筑物受破坏的程度进行评估,且评估结果不够精准,因此提出基于复杂网络的建筑物抗震能力的评估方法。考虑到地震中的危险性因素,以地面峰值加速度为参数对强震环境下复杂网络建筑物抗毁性进行测评和分析,在此基础上提出对复杂网络下建筑物的防震抗毁能力进行评估的相对建筑物抗震性能指数,并结合建筑物抗震能力评估标准确定其抗震能力水平;再进行仿真实验加以测量,并结合震害经验,证实该方法的有效性。     

Use of Seismotectonic Information for the Seismic Hazard Analysis for Surat City, Gujarat, India: Deterministic and Probabilistic Approach

Surat, the financial capital of Gujarat, India, is a mega city with a population exceeding five millions. The city falls under Zone III of the Seismic Zoning Map of India. After the devastating 2001 Bhuj earthquake of Mw 7.7, much attention is paid towards the seismic microzonation activity in the state of Gujarat. In this work, an attempt has been made to evaluate the seismic hazard for Surat City (21.170?N, 72.830?E) based on the probabilistic and deterministic seismic hazard analysis. After collecting a catalogue of historical earthquakes in a 350?km radius around the city and after analyzing a database statistically, deterministic analysis has been carried out considering known tectonic sources; a further recurrence relationship for the control region is found out. Probabilistic seismic hazard analyses were then carried out for the Surat region considering five seismotectonic sources selected from a deterministic approach. The final results of the present investigations are presented in the form of peak ground acceleration and response spectra at bed rock level considering the local site conditions. Rock level Peak Ground Acceleration (PGA) and spectral acceleration values at 0.01?s and 1.0?s corresponding to 10% and 2% probability of exceedance in 50 years have been calculated. Further Uniform Hazard Response Spectrum (UHRS) at rock level for 5% damping, and 10% and 2% probability of exceedance in 50 years, were also developed for the city considering all site classes. These results can be directly used by engineers as basic inputs in earthquake-resistant design of structures in and around the city.     

Seismic Hazard Assessment of the East Thuringian Region/Germany – Case Study

East Thuringia/Germany, especially the region Gera-Ronneburg, is part of the large Kyffhäuser-Jachymov-Fault-Zone and displays moderate seismicity. However, its seismic hazard is significantly higher than that of the surrounding area including the Vogtland/Northern Bohemian region. The earthquake catalogue of Germany contains for this region besides the well-investigated Central German Earthquake (March 1872, I ₀ =VII-VIII) entries of up to I ₀ =VIII (14th century). Epicentral intensities and coordinates of these historical earthquakes are considered as uncertain. In seismic hazard analysis historical events which are uncertain are often neglected. But, especially in regions of moderate seismicity and infrequent larger earthquakes, the time window considered should be extended as far as possible. Apart from the necessity to study the historical sources of the strongest 14th century earthquakes, we investigate the influence of these events on the seismic hazard, taking into account the uncertainties of their size and location. Generally, the investigations clearly reveal the importance of defining source regions on the one hand and the significance of the local relevant attenuation function on the other hand. A further important point in seismic hazard assessment is the strong influence of the geological site conditions on seismic hazard (amplification or damping phenomena). For both points the well-known Central German Earthquake (1872) supplies important information.     

Improved seismic risk estimation for Bucharest,based on multiple hazard scenarios and analytical methods

Bucharest, capital of Romania, is one of the most exposed big cities in Europe to seismic damage, due to the intermediate-depth earthquakes in the Vrancea region, to the vulnerable building stock and local soil conditions.This paper tries to answer very important questions related to the seismic risk at city scale that were not yet adequately answered. First, we analyze and highlight the bottlenecks of previous risk-related studies. Based on new researches in the hazard of Bucharest (recent microzonation map and ground-motion prediction equations, reprocessed real recorded data) and in vulnerability assessment (analytical methods, earthquake loss estimation software like SELENA and ELER, the recently implemented Near Real-Time System for Estimating the Seismic Damage in Romania) we provide an improved estimation of the number of buildings and population that could be affected, for different earthquake scenarios. A new method for enhancing the spatial resolution of the building stock data is used successfully.     

Seismic hazard assessment for derivation of earthquake scenarios in Risk-UE

The main features of the Risk-UE project approach to assessing the ground-shaking (and related hazards) distribution within urban areas are described, as a basis for developing seismic damage scenarios for European cities. Emphasis was placed in the project on adoption of homogeneous criteria in the quantitative treatment of seismicity and in constructing the ground-shaking scenarios, despite wide differences in amount and quality of data available for the cities involved. The initial steps of the approach include treatment of the regional seismotectonic setting and the geotechnical zonation of the urban area, while the hazard assessment itself takes the form of both a deterministic analysis, and of a probabilistic, constant-hazard spectra analysis. Systematic 1D site response analyses were used, mostly in the softer soil zones, to modify (when needed) the obtained ground motion maps. Earthquake induced hazard effects, such as liquefaction and landsliding, are also briefly dealt with at the end.     

地震波实时处理系统在自贡台网地震速报中的应用分析

着重介绍了自贡地震台网地震波实时处理系统在地震速报中的作用，并利用台网1997－2001年地震速报资料，统计分析了发震时刻、震中位置、震级及速报速度等，在地震波实时处理系统参与后，自贡台网速报质量均有大幅度的提高。     

Probabilistic seismic hazard analysis in Nepal

The seismic ground motion hazard for Nepal has been estimated using a probabilistic approach. A catalogue of earthquakes has been compiled for Nepal and the surrounding region （latitude 26% N and 31.7% N and longitude 79° E and 90° E） from 1255 to 2011. The distribution of catalogued earthquakes, together with available geological and tectonic information were used to delineate twenty-three seismic source seismic source information and probabilistic earthquake hazard prediction relationship, peak ground accelerations （PGAs） have zones in Nepal and the surrounding region. By using the parameters in conjunction with a selected ground motion been calculated at bedrock level with 63%, 10%, and 2% probability of exceedance in 50 years. The estimated PGA values are in the range of 0.07-0.16 g, 0.21 0.62 g, and 0.38-1.1 g for 63%, 10%, and 2% probability of exceedance in 50 years, respectively. The resulting ground motion maps show different characteristics of PGA distribution, i.e., high hazard in the far-western and eastern sections, and low hazard in southern Nepal. The quantified PGA values at bedrock level provide information for microzonation studies in different parts of the country.     

Seismic vulnerability estimation of the building considering seismic environment and local site condition

Introduction The estimation of damage probability distribution among different damage states of rein-forced concrete buildings is a key component of earthquake loss estimation for modern city or a group of cities. With the development of city, the reinforced concrete buildings are major compo-nent parts of modern cities. Vulnerability estimates for these kinds of buildings are of importance to those responsible for civil protection, relief, and emergency services to enable adequate contin-genc…     

统一考虑地震环境和局部场地影响的建筑物易损性研究

提出了一种综合考虑地震环境和场地影响的钢筋混凝土房屋地震易损性分析方法. 将地震环境、局部场地和工程结构作为一个整体,以概率地震危险性分析的方式考虑地震环境的影响,在此基础上详细考虑了随局部场地而变化的反应谱形状对结构地震反应及其破坏概率分布的影响. 此外,还提出了另一种表述结构易损性的方式,以对应于不同超越概率地震危险水平的方式, 提供结构地震破坏概率分布的信息.      

Seismic hazard analysis for engineering sites based on the stochastic finite-fault method

Seismic hazard analyses are mainly performed using either deterministic or probabilistic methods. However, there are still some defects in these statistical model-based approaches for regional seismic risk assessment affected by the near-field of large earthquakes. Therefore, we established a deterministic seismic hazard analysis method that can characterize the entire process of ground motion propagation based on stochastic finite-fault simulation, and we chose the site of the Xiluodu dam to demonstrate the method. This method can characterize earthquake source properties more realistically than other methods and consider factors such as the path and site attenuation of seismic waves. It also has high computational efficiency and is convenient for engineering applications. We first analyzed the complexity of seismogenic structures in the Xiluodu dam site area, and then an evaluation system for ground motion parameters that considers various uncertainties is constructed based on a stochastic finite-fault simulation. Finally, we assessed the seismic hazard of the dam site area comprehensively. The proposed method was able to take into account the complexity of the seismogenic structures affecting the dam site and provide multi-level parameter evaluation results corresponding to different risk levels. These results can be used to construct a dam safety assessment system of an earthquake in advance that provides technical support for rapidly and accurately assessing the post-earthquake damage state of a dam, thus determining the influence of an earthquake on dam safety and mitigating the risk of potential secondary disasters.