Schwermineralvergesellschaftungen aus ostalpinen Sedimentationsbecken der Kreidezeit

In the Eastern Alps the study of heavy minerals from Cretaceous and Early Tertiary sediments enables us to distinguish at least three different provinces.

1. 1.
   The deposits of Helveticum and the lower parts of Penninicum contain predominantly zircon, together with varying quantities of rutile, tourmaline and apatite.     
   
   

Seismic anisotropy of the mantle beneath Eastern Asia based on <Emphasis Type="Italic">ScS</Emphasis> and <Emphasis Type="Italic">S</Emphasis> waves from deep-focus earthquakes

The seismic anisotropy of the mantle is studied based on the data of S and ScS waves from earthquakes occurred in the mantle transition zone over the period of 2007–2013 and recorded by seismic stations in the continental margin of Asia, on Sakhalin Island, and in the southern part of the Kamchatka Peninsula. The measurements of the azimuths of polarization of the fast S and ScS waves in the continental margin of Asia show that they are predominantly oriented in the E–SE directions. Based on the distribution of the shear wave splitting parameters, the symmetry of the medium can be described in terms of a transversely isotropic model with a horizontal symmetry axis and may correspond to horizontal flow in the upper mantle beneath the Amur Plate. The fast azimuths of polarization of ScS wave, which were determined to be of N–NE directions in the northern area of Sakhalin Island and in the continental part of Asia, may correspond to an inclined flow under the conditions of oblique subduction and complex geometry of the downgoing Pacific Plate. In the south of the Kamchatka Peninsula, the S- and ScS-wave azimuths of polarization from the M 8.4 Sea of Okhotsk earthquake are determined to be oriented along the direction of the Pacific Plate motion. The fast-S-wave azimuths of polarization from the aftershocks of the Sea of Okhotsk earthquake and from other large events of 2008–2009 are determined to be nearly parallel to the motion trend of the Pacific Plate, but orthogonal to it for the events of 2008–2009. On the basis of the distribution of azimuths of polarization of the fast S waves, the symmetry of the medium can be described in terms of a transversely isotropic model with the symmetry axis inclined orthogonally to the plane of downgoing plate and oriented westward orthogonally to the trench strike.     

Ultimate Bearing Capacity Prediction of Eccentrically Inclined Loaded Strip Footings

Extensive laboratory model tests have been carried out on a strip footing resting over dry sand bed subjected to eccentrically inclined load to determine the ultimate bearing capacity (Patra et al. in Int J Geotech Eng 6(3):343–352, 2012a.  https://doi.org/10.3328/IJGE.2012.06.03.343-352, Int J Geotech Eng 6(4):507–514, b.  https://doi.org/10.3328/IJGE.2012.06.04.507-514). Similarly, lower bound calculations based on finite element method were performed to compute the bearing capacity of a strip footing subjected to an eccentric and inclined load lying over a cohesionless soil with varying embedment depth and relative density (Krabbenhoft et al. in Int J Geomech ASCE, 2014.  https://doi.org/10.1061/(ASCE)GM.1943-5622.0000332). The load may be applied in two ways namely, towards the center line and away from the center line of the footing. Based on the results (both experimental and numerical analyses), a neural network model is developed to predict the reduction factor that will be used in computing the ultimate bearing capacity of an eccentrically inclined loaded strip footing. This reduction factor (RF) is the ratio of the ultimate bearing capacity of the footing subjected to an eccentrically inclined load to the ultimate bearing capacity of the footing subjected to a centric vertical load. A thorough sensitivity analysis is carried out to evaluate the parameters affecting the reduction factor. Based on the weights of the developed neural network model, a neural interpretation diagram is developed to find out whether the input parameters have direct or inverse effect on the output. A prediction model equation is framed with the trained weights of the neural network as the model parameters. The predictions from ANN, and those from other approaches, are compared with the results computed from both experimentation and FEM analyses. The ANN model results are found to be more accurate and well matched with other results.     

Shear wave velocity imaging of landslide debris deposited on an erodible bed and possible movement mechanism for a loess landslide in Jingyang,Xi’an,China

The South Jingyang Plateau, with a total area of 70 km², is located in Shaanxi Province, China. Since 1976, more than 50 landslides of different types have occurred repeatedly on the edge slopes of the plateau due to the start of diversion irrigation on the plateau, resulting in great loss of lives and property. To better understand the initiation and movement mechanisms of these loess landslides, we surveyed them and carried out a detailed investigation of a large landslide in the Xihetan area. Our field survey results revealed that although most of these landslides had a long runout with high mobility, most of the landslide materials originating from the edge slopes may have been in an unsaturated state when the landslide occurred. This suggests that the materials at the toe of the edge slope as well as on the travel path along the river terrace might have played a key role in landslide movement. To examine how the materials on the travel path were involved in the landsliding, we used a multichannel surface wave technique and surveyed shear wave velocity (V _s ) profiles of the landslide deposits. We also examined the internal geometry of the deposits that outcropped on the right-side slope of the landslide foot. The longitudinal profile of V _s along the direction of movement showed that terrace deposits near the toe of the edge slope may have been sheared upward, indicating that at the toe, the surface of rupture might be located inside the terrace deposits. The V _s contours showed an A-shaped fold within the landslide deposits in the middle part of the travel path and became greater in the most distal toe part. The V _s profile across the deposits showed a U-shaped belt, in which the soil layers have smaller V _s . This belt may be the boundary between the sliding landslide debris and terrace deposits. The observed internal geometry of the landslide deposits indicates that a sliding surface developed within the sandy layer underlying the gravel layer. Therefore, we inferred that after failure, the displaced landslide materials overrode and sheared the terrace deposits along its main sliding direction, resulting in the formation of thrust folds within the terrace deposits, and greater V _s on the distal toe part of the landslide.     

Electrogeochemical sampling with

通过对兰州不同气候背景下形成的风尘沉积 1 80个样品详细的粒度分析,建立了该地区风尘沉积的粒度分布基本模式。发现研究区风尘沉积具有以下特征:(1 )沉积物分选差,主要由粒径 >4Φ的颗粒组成,平均6.4Φ (2 )粒级构成为极细砂 2.6 %、粉砂 77.8%、粘土 1 9.6 %,属粉质重亚粘土或典型黄土 (3)频率曲线为单峰、极正偏类型,且具有粗头短促、中间宽大和细尾拉长的特点 (4)短期悬浮颗粒与长期悬浮颗粒大致呈对等配比。这些特征同时也为兰州现代尘暴沉积物所具备,因而可视为该地区风尘沉积的一个基本诊断模式搬运方式。颗粒粒径 <5.5 0Φ的含量指标 (GSP1)和 4.5 0～ 6.5 0Φ的含量指标 (GSP2 )可分别作为冰期-间冰期尺度和冰段-间冰段尺度东亚冬季风演化和沙尘暴强弱程度的基本判据。     

兰州风尘沉积的粒度分布模式及其古气候意义

通过对兰州不同气候背景下形成的风尘沉积 1 80个样品详细的粒度分析,建立了该地区风尘沉积的粒度分布基本模式。发现研究区风尘沉积具有以下特征:(1 )沉积物分选差,主要由粒径 >4Φ的颗粒组成,平均6.4Φ (2 )粒级构成为极细砂 2.6 %、粉砂 77.8%、粘土 1 9.6 %,属粉质重亚粘土或典型黄土 (3)频率曲线为单峰、极正偏类型,且具有粗头短促、中间宽大和细尾拉长的特点 (4)短期悬浮颗粒与长期悬浮颗粒大致呈对等配比。这些特征同时也为兰州现代尘暴沉积物所具备,因而可视为该地区风尘沉积的一个基本诊断模式搬运方式。颗粒粒径 <5.5 0Φ的含量指标 (GSP1)和 4.5 0～ 6.5 0Φ的含量指标 (GSP2 )可分别作为冰期-间冰期尺度和冰段-间冰段尺度东亚冬季风演化和沙尘暴强弱程度的基本判据。     

The formation of porphyry copper deposits

Copper is a moderately incompatible chalcophile element. Its behavior is strongly controlled by sulfides. The speciation of sulfur is controlled by oxygen fugacity. Therefore, porphyry Cu deposits are usually oxidized (with oxygen fugacities > ΔFMQ +2) (Mungall 2002; Sun et al. 2015). The problem is that while most of the magmas at convergent margins are highly oxidized, porphyry Cu deposits are very rare, suggesting that high oxygen fugacity alone is not sufficient. Partial melting of mantle peridotite even at very high oxygen fugacities forms arc magmas with initial Cu contents too low to form porphyry Cu deposits directly (Lee et al. 2012; Wilkinson 2013). Here we show that partial melting of subducted young oceanic slabs at high oxygen fugacity (>ΔFMQ +2) may form magmas with initial Cu contents up to >500 ppm, favorable for porphyry mineralization. Pre-enrichment of Cu through sulfide saturation and accumulation is not necessarily beneficial to porphyry Cu mineralization. In contrast, re-melting of porphyritic hydrothermal sulfide associated with iron oxides may have major contributions to porphyry deposits. Thick overriding continental crust reduces the “leakage” of hydrothermal fluids, thereby promoting porphyry mineralization. Nevertheless, it is also more difficult for ore forming fluids to penetrate the thick continental crust to reach the depths of 2–4 km where porphyry deposits form.     

Tonminerale in normalsedimenten,hydrothermal beeinflu\ten sedimenten und Erzschlämmen des Roten Meeres

From 14 deeps and other regions of the Red Sea totally 226 samples from 28 cores recovered during the VALDIVIA cruises (1971, 1972) were investigated according to their clay mineral content (<2μm resp. < 6.3 μm) after carbonate dissolution. Three facies groups are to distinguish:

1. normal sediments: dominance of chlorite, kaolinite, illite, small amounts of smectite and sepiolite. Two palygorskite types are present only in a few samples.
2. normal sediments with hydrothermal influence: clay mineral paragenesis similar like that of normal sediments; but increase of smectite and presence of goethite in each sample; partly small contents of talc.
3. heavy metal deposits: dominance of iron-bearing smectite, partly with amorphous components resp. pure ore mineral assemblages with authigenic silicates (talc, quartz, opal, chrysotile, sepiolite, palygorskite, chlorite).

Crystallinity of the clay and ore minerals is independent from sedimentary overburden. Sepiolite shows in small amounts a wide distribution; palygorskite₂ (d₁₁₀=11.3 Å) yields locally an increased concentration in the range of pteropod layers cemented by aragonite. The environment of ore deposits is characterized by iron-bearing smectite besides the ore minerals.     

Physico-chemical conditions of four calc-alkaline granitoid plutons of Chhotanagpur Gneissic Complex,eastern India: Tectonic implications

Petrography and mineralogy of four calc-alkaline granitoid plutons Agarpur, Sindurpur, Raghunathpur and Sarpahari located from west to east of northern Purulia of Chhotanagpur Gneissic Complex, eastern India, are investigated. The plutons, as a whole, are composed of varying proportions of Qtz–Pl–Kfs–Bt–Hbl±Px–Ttn–Mag–Ap–Zrn±Ep. The composition of biotite is consistent with those of calc-alkaline granitoids. Hornblende–plagioclase thermometry, aluminium-in-hornblende barometry and the assemblage sphene–magnetite–quartz were used to determine the P, T and \(f_{\mathrm{O}_2}\) during the crystallisation of the parent magmas in different plutons. The plutons are crystallised under varying pressures (6.2–2.4 kbar) and a wide range of temperatures (896–\(718{^{\circ }}\hbox {C}\)) from highly oxidised magmas (log \(f_{\mathrm{O}_2}\) \(-11.2\) to \(-15.4\) bar). The water content of the magma of different plutons varied from 5.0 to 6.5 wt%, consistent with the calc-alkaline nature of the magma. Calc-alkaline nature, high oxygen fugacity and high \(\hbox {H}_{2}\hbox {O}_{{\mathrm{melt}}}\) suggest that these plutons were emplaced in subduction zone environment. The depths of emplacement of these plutons seem to increase from west to east. Petrologic compositions of these granitoids continuously change from enderbite (opx-tonalite: Sarpahari) in the east to monzogranite (Raghunathpur) to syenogranite (Sindurpur) to alkali feldspar granite (Agarpur) in the west. The water contents of the parental magmas of different plutons also increase systematically from east to west. No substantial increase in the depth of emplacement is found in these plutons lying south and north of the major shear zone passing through the study area suggesting the strike-slip nature of the east–west shear zone.     

Soil bacterial strains with heavy metal resistance and high potential in degrading diesel oil and <Emphasis Type="Italic">n</Emphasis>-alkanes

Four bacterial strains, capable of degrading diesel oil, n-alkanes or hexadecane, were isolated from soils contaminated with petroleum oil and identified. Strains of Pseudomonas sp., Pseudomonas putida TPHK-1 and Pseudomonas aeruginosa TPHK-4, were more efficient in degrading high concentrations of the hydrocarbons than the other two strains, Stenotrophomonas maltophilia TPHK-2 and Acenitobacter sp. TPHK-3. P. putida TPHK-1 exhibited tolerance to very high concentrations of heavy metals such as cadmium, lead, zinc and copper. The innate ability of P. putida TPHK-1, as evidenced by the amplified genes alkB1 and alkB2 that encode alkane hydroxylases, and cat12o and cat23o coding for catechol dioxygenase, in degrading diesel oil in the presence of heavy metals is far greater than that of the strains reported in the literature. Heavy metal tolerance coupled with rapid degradation of hydrocarbons, even at high concentrations, suggests that P. putida TPHK-1 has a great potential in remediating soils contaminated with mixtures of hydrocarbons and heavy metals.     

Mesozoic volcanics of western sicily

The Mesozoic lavas and minor intrusions in the thrust sheets of western Sicily have the following characteristics:

1. The lavas in the Triassic Mufara Formation in the north were broken into fragments which rotated independently within the incompetent strata that enclose them. This behavior is characteristic of igneous rocks found within the more internal (northerly) thrust units.
2. The Jurassic lavas in the more external (southerly) units have consistent directions which agree with those of the Ammonitico Rosso limestones in the same zone and lie about 30° clockwise from those of coeval autochthonous formations in Tunisia.Schult's presumed Cretaceous directions from Custonaci on the north coast (similar to those found in the Cretaceous Scaglia Rossa at Terrasini to the east byChannel et al., 1980) are rotated still more (140°) with respect to those of the autochthonous Iblean platform of SE Sicily. These differences are believed to reflect rotation of the thrust sheets during tectonic transport in Cenozoic times, the internal units being the most strongly rotated.
3. All the igneous rocks are highly altered: generally the original mineralogy cannot be completely determined. Relative abundances of some of the less mobile elements (Ti, Sr, Y) suggest that they are intraplate basalts.

     

Ore mineralization related to geological evolution of the Karkonosze–Izera Massif (the Sudetes,Poland) — Towards a model

The Karkonosze–Izera Massif is a large tectonic unit located in the northern periphery of the Bohemian Massif. It includes the Variscan Karkonosze Granite (about 328–304 Ma) surrounded by the following four older units:

• -Izera–Kowary (the Early Paleozoic continental crust of the Saxothuringian Basin),
• -Ještĕd (the Middle Devonian to Lower Viséan sedimentary succession deposited on the NE passive margin of the Saxothuringian Terrane), out of the present study area,
• -Southern Karkonosze (metamorphosed sediments and volcanics filling the Saxothuringian Basin), out of the present study area,
• -Leszczyniec (Early Ordovician, obducted fragment of Saxothuringian Basin sea floor).

The authors present a genetic model of ore mineralization in the Karkonosze–Izera Massif, in which ore deposits and ore minerals occurrences are related to the successive episodes of the geological history of the Karkonosze–Izera Massif:

• -formation of the Saxothuringian Basin and its passive continental margin (about 500–490 Ma)
• -Variscan thermal events:
  • -regional metamorphism (360–340 Ma)
  • -Karkonosze Granite intrusion (328–304 Ma)
• -Late Cretaceous and Neogene-to-Recent hypergenic processes.

The oldest ore deposits and ore minerals occurrences of the Karkonosze–Izera Massif are represented by pyrite and magnetite deposits hosted in the Leszczyniec Unit as well as by magnetite deposit and, presumably, by a small part of tin mineralization hosted in the Izera–Kowary Unit. All these deposits and occurrences were subjected to the pre-Variscan regional metamorphism.Most of the Karkonosze–Izera Massif ore deposits and occurrences are related to the Karkonosze Granite intrusion. This group includes a spatially diversified assemblage of small ore deposits and ore mineral occurrences of: Fe, Cu, Sn, As, U, Co, Au, Ag, Pb, Ni, Bi, Zn, Sb, Se, S, Th, REE, Mo, W and Hg located within the granite and in granite-related pegmatites, in the close contact aureole of the granite and within the metamorphic envelope, at various distances from the granite. Assuming world standards, all these deposits are now uneconomic. Various age determinations indicated that ore formation connected with the Karkonosze Granite might have taken place mostly between about 326 and 270 Ma.The last ore-forming episode in the Karkonosze–Izera Massif is related to hypergenic processes, particularly important in the northern part of the massif, in the Izera–Kowary Unit where some uranium deposits and occurrences resulted from the infiltration of ore solutions that originated from the weathering of pre-existing accumulations of uranium minerals. A separate problem is the presence of oxidation zones of ore deposits and occurrences, both the fossil and the recent.A full list of ore minerals identified in described deposits and occurrences of the Karkonosze–Izera Massif together with relevant, key references is presented in the form of an appendix.     

Airy’s isostatic model: a proposal for a realistic case

This work derives algebraic expressions for Airy-type isostatic equilibrium and disequilibrium of lithospheric blocks within asthenosphere, considering a more realistic case of continuously varying densities of the lithosphere along mutually perpendicular directions. Isostatic (dis)equilibrium must be linked to the porosity and density of the rock matrix, and to pore fluid density since these factors govern the bulk density of wet sediments/porous rocks. Two combinations of exponential and linear increase of density with depth are demonstrated. Isostatic disequilibrium would speed up sinking/uplift of the lithospheric blocks. Given any other (empirical) equations for density variation in three perpendicular directions, isostatic (dis)equilibrium such as Eqs. 14, 17, 18, 28, and 29 can be theorized as well.     

Paleoenvironmental reconstruction of quaternary sedimentation in eastern Sri Lanka: An ichnological study

Quaternary sediment deposits are well exposed along the eastern coastal margin of Sri Lanka. Systematic trace fossil studies along with sediment characteristics have been carried out for the first time to interpret the paleoenvironment that prevailed during Quaternary sedimentation in eastern Sri Lanka. The trace fossils Thalassinoides, Skolithos and Polykladichnus have been recognized about 5m above the present mean sea level. Features of the major trace fossil, Thalassinoides, indicate that it was formed by Thalassinidean shrimp Calianassa. Isolated, vertical to steeply inclined, cylindrical to sub cylindrical tubes with thin internal wall lining and inner wall striations of Skolithos and Polykladichnus show that they were formed by polychaetes. The typical characteristic of Polykladichnus isY-shaped branching with slight enlargement at junctions. Morphology and association of burrows as well as mineralogy, grain size and roundness of sediments indicate that the environment prevailed was marine soft grounds of the intertidal zone. Presence of preserved fine-scale features of burrows indicate that the bioturbated sandy tidal flat was suddenly exposed to the tropical environment due to sea level regression in Quaternary periods. Due to the microbial activities of wall linings, burrows were preserved and it was supported by other microbial activities that produced secondary iron bearing minerals that suffered subsequent oxidation. The bio-origination of red sediments of eastern coastal area of the present study can be used to interpret the debatable origin of the red beds found in northwestern and southeastern coastal areas of the island.