Assessing the Clock of Gaia: Design and Implementation of A Clock Framework Simulator

A powerful and highly configurable simulator of generic clock frameworks is presented and evaluated. This software tool was initially designed to test the reliability of clock data for the Gaia space mission. However, our application has been developed as much parameterized as possible in order to easily adapt it to any other space mission. The main goals of our software tool are to simulate the real performance of an atomic master clock, including the typical noises present in this kind of devices, and to check the reliability of the generation and distribution of clock sub-products. The latter, which are generated by other devices such as frequency multipliers and dividers, are also implemented in the simulator, as well as the corresponding transmission lines. In our simulator the clock outputs obtained from the several nodes of the framework can be displayed with the appropriate graphical tools, therefore easing the task of validating several design issues. Also, the parameters of the master clock and of all the framework devices, as well as the whole clock framework structure are entered using XML files, which can also be graphically verified. Finally, the accuracy and stability of the atomic clock which is expected to fly on-board of Gaia is assessed. We also discuss in depth the several issues regarding the time data products that Gaia will require and we characterize the most important elements.     

Tailored data compression using stream partitioning and prediction: application to Gaia

Gaia is the most ambitious space astrometry mission currently envisaged and it will be a technological challenge in all its aspects. Here we describe a proposal for the data compression system of Gaia, specifically designed for this mission but based on concepts that can be applied to other missions and systems as well. Realistic simulations have been performed with our Telemetry CODEC software, which performs a stream partitioning and pre-compression to the science data. In this way, standard compressors such as bzip2 or szip boost their performance and decrease their processing requirements when applied to such pre-processed data. These simulations have shown that a lossless compression factor of 3 can be achieved, whereas standard compression systems were unable to reach a factor of 2.      

On the Gaia Expected Harvest on Eclipsing Binaries

The space experiment Gaia, the approved cornerstone 6 ESA mission, will observe up to a billion stars in our Galaxy and obtain their astrometric positions on a micro-arcsec level, multi-band photometry as well as spectroscopic observations. It is expected that about one million Eclipsing Binaries (EBs) (with V ≤ 16 mag) will be discovered and the observing fashion will be quite similar to Hipparcos/Tycho mission operational mode. The combined astrometric, photometric and spectroscopic data will be used to compute the physical parameters of the observed EBs. From a study of a small sample of EBs, it is shown that the agreement between the fundamental stellar parameters, derived from ground-based and Hipparcos (Gaia-like) observations, is more than satisfactory and the Gaia data will be suitable to obtain accurate binary solutions.     

Gaia, an unprecedented observatory for Solar System dynamics

The mission Gaia by European Space Agency (ESA) is expected to fly at the end of 2011 and to perform an all-sky, magnitude-limited survey for 5 years. The probe will not use an input catalogue, and will get high accuracy astrometry and photometry for all sources of magnitude V<20. Low-resolution spectra will also be available. Moving Solar System objects will be observed as well, and their observations will be processed by a specific pipeline in order to retrieve the physical and dynamical characteristics of each object. In this contribution we will mainly focus on the impact of Gaia observations on asteroid dynamics. A dramatic improvement of orbital elements is expected, as well as the measurement of subtle effects such as those related to general relativity (GR). Gaia observations will also be supported by a network of ground-based observation sites, capable of providing follow-up for newly discovered objects that will not receive an adequate coverage from space. Specific strategies for follow-up are being planned and tested. These will need to take into account the peculiar observing geometry (large parallax effect due to the orbit of Gaia around L2) and the time constraints dictated by data processing.     

Using Java for distributed computing in the Gaia satellite data processing

In recent years Java has matured to a stable easy-to-use language with the flexibility of an interpreter (for reflection etc.) but the performance and type checking of a compiled language. When we started using Java for astronomical applications around 1999 they were the first of their kind in astronomy. Now a great deal of astronomy software is written in Java as are many business applications. We discuss the current environment and trends concerning the language and present an actual example of scientific use of Java for high-performance distributed computing: ESA’s mission Gaia. The Gaia scanning satellite will perform a galactic census of about 1,000 million objects in our galaxy. The Gaia community has chosen to write its processing software in Java. We explore the manifold reasons for choosing Java for this large science collaboration. Gaia processing is numerically complex but highly distributable, some parts being embarrassingly parallel. We describe the Gaia processing architecture and its realisation in Java. We delve into the astrometric solution which is the most advanced and most complex part of the processing. The Gaia simulator is also written in Java and is the most mature code in the system. This has been successfully running since about 2005 on the supercomputer “Marenostrum” in Barcelona. We relate experiences of using Java on a large shared machine. Finally we discuss Java, including some of its problems, for scientific computing.     

Contribution to the ground-based follow-up of the Gaia space mission

The Gaia Space Mission [Mignard, F., 2005. The three-dimensional universe with Gaia. ESA/SP-576; Perryman, M., 2005. The three-dimensional universe with Gaia. ESA/SP-576] will observe several transient events as supernovae, microlensing, gamma ray bursts and new Solar System objects. The satellite, due to its scanning law, will detect these events but will not be able to monitor them. So, to take these events into consideration and to perform further studies it is necessary to follow them with Earth-based observations. These observations could be efficiently done by a ground-based network of well-equipped telescopes scattered in both hemispheres.Here we focus our attention at the new Solar System objects to be discovered and observed by the Gaia satellite [Mignard, F., 2002. Observations of Solar System objects by Gaia I. Detection of NEOS. Astron. Astrophys. 393, 727] mainly asteroids, NEOs and comets. A dedicated ground-based network of telescopes as proposed by Thuillot [2005. The three-dimensional universe with Gaia. ESA/SP-576] will allow to monitor those events, to avoid losing them and to perform a quick characterization of some physical properties which will be important for the identification of these objects in further measurements by Gaia.We present in this paper, the beginning of the organization of a Latin-American ground-based network of telescopes and observers joining several institutions in Argentina, Bolivia, Brazil and other Latin-American countries aiming to contribute to the follow-up of Gaia science alerts for Solar System objects.     

Standard candles from the Gaia perspective

The ESA Gaia mission will bring a new era to the domain of standard candles. Progresses in this domain will be achieved thanks to unprecedented astrometric precision, whole-sky coverage and the combination of photometric, spectrophotometric and spectroscopic measurements. The fundamental outcome of the mission will be the Gaia catalogue produced by the Gaia Data Analysis and Processing Consortium (DPAC), which will contain a variable source classification and specific properties for stars of specific variability types. We review what will be produced for Cepheids, RR Lyrae, Long Period Variable stars and eclipsing binaries.     

Synthetic stellar and SSP libraries as templates for Gaia simulations

ESA’s Gaia mission will collect low resolution spectroscopy in the optical range for ～10⁹ objects. Complete and up-to-date libraries of synthetic stellar spectra are needed to built algorithms aimed to automatically derive the classification and the parametrization of this huge amount of data. In addition, libraries of stellar spectra are one of the main ingredients of stellar population synthesis models, aiming to derive the properties of unresolved stellar populations from their integrated light. We present (a) the newly computed libraries of synthetic spectra built by the Gaia community, covering the whole optical range (300–1100 nm) at medium-high resolution of (0.3 nm) for stars spanning the most different types, from M to O, from A-peculiar to Emission lines to White Dwarfs, and (b) the implementation of those libraries in our SSP code (Tantalo in The Initial Mass Function 50 Years Later, 327:235 2005), exploring different stellar evolution models.     

The Gaia Mission: Expected Applications to Asteroid Science

According to current plans of the European space agency, Gaia will be launched in 2011. By performing a systematic survey of the whole sky down to magnitude V = 20, this mission will provide a fundamental contribution in practically all branches of modern Astrophysics. Gaia will be able to survey with repeated observations spanning over 5 years several 100,000 s asteroids. It will directly measure sizes of about 1,000 objects, obtain the masses of about 100 of them, derive spin properties and overall shapes of more than 10,000 objects, yield much improved orbits and taxonomic classification for most of the observed sources. The final harvest will very likely include new discoveries of objects orbiting at heliocentric distances less than 1 AU. At the end of the mission, we will know average densities of about 100 objects belonging to all the major taxonomic classes, have a much more precise knowledge of the inventory and size and spin distributions of the population, of the distribution of taxonomic classes as a function of heliocentric distance, and of the dynamical and physical properties of dynamical families.     

Elemental abundances in the Milky Way stellar disk(s), bulge,and halo

We present a review of elemental abundances in the Milky Way stellar disk, bulge, and halo with a focus on data derived from high-resolution stellar spectra. These data are fundamental in disentangling the formation history and subsequent evolution of the Milky Way. Information from such data is still limited and confined to narrowly defined stellar samples. The astrometric Gaia satellite will soon be launched by the European Space Agency. Its final data set will revolutionize information on the motions of a billion stars in the Milky Way. This will be complemented by several ground-based observational campaigns, in particular spectroscopic follow-up to study elemental abundances in the stars in detail. Our review shows the very rich and intriguing picture built from rather small and local samples. The Gaia data deserve to be complemented by data of the same high quality that have been collected for the solar neighborhood.     

Science performance of Gaia, ESA’s space-astrometry mission

Gaia is the next astrometry mission of the European Space Agency (ESA), following up on the success of the Hipparcos mission. With a focal plane containing 106 CCD detectors, Gaia will survey the entire sky and repeatedly observe the brightest 1,000 million objects, down to 20^th magnitude, during its 5-year lifetime. Gaia’s science data comprises absolute astrometry, broad-band photometry, and low-resolution spectro-photometry. Spectroscopic data with a resolving power of 11,500 will be obtained for the brightest 150 million sources, down to 17^th magnitude. The thermo-mechanical stability of the spacecraft, combined with the selection of the L2 Lissajous point of the Sun-Earth/Moon system for operations, allows stellar parallaxes to be measured with standard errors less than 10 micro-arcsecond (μas) for stars brighter than 12^th magnitude, 25 μas for stars at 15^th magnitude, and 300 μas at magnitude 20. Photometric standard errors are in the milli-magnitude regime. The spectroscopic data allows the measurement of radial velocities with errors of 15 km s⁻¹ at magnitude 17. Gaia’s primary science goal is to unravel the kinematical, dynamical, and chemical structure and evolution of the Milky Way. In addition, Gaia’s data will touch many other areas of science, e.g., stellar physics, solar-system bodies, fundamental physics, and exo-planets. The Gaia spacecraft is currently in the qualification and production phase. With a launch in 2013, the final catalogue is expected in 2021. The science community in Europe, organised in the Data Processing and Analysis Consortium (DPAC), is responsible for the processing of the data.     

The astrophysical parameters of Majaess-95 and Majaess-225

Most astrophysical parameters of the two stellar clusters Majaess 95 and Majaess 225 have been investigated here for the first time using the third data release of the Gaia space mission (Gaia-DR3). The membership probabilities of stars were assigned using the pyUPMASK algorithm. The parallaxes offset has been corrected using the zero-point correction code of Lindegren et al. (Lindegren et al. 2021, A&A, 649, A4). Using the clusters' members with membership probabilities >0.50, we calculated the distance to the clusters of 3311 and 3020 (±130) pc, respectively, which agree with the results from our isochrone fitting on the color-magnitude diagram. The ages are found to be 282 (±20) and 12.6 (±2) Ma. Also, the reddening, heliocentric distances, luminosity function, mass function, and total mass were estimated. On studying the dynamic state (relaxation time), we found that Majaess-95 is a relaxed cluster, while Majaess-225 is not relaxed yet.     

Dynamical attitude model for Gaia

The Dynamical Attitude Model (DAM) is a simulation package developed to achieve a detailed understanding of the Gaia spacecraft attitude. It takes into account external physical effects and considers internal hardware components controlling the satellite. The main goal of the Gaia mission is to obtain extremely accurate astrometry, and this necessitates a good knowledge of Gaia’s behaviour as a spinning rigid body under the influence of various perturbations. This paper describes these perturbations and how they are modelled in DAM.     

Building the cosmic distance scale: from Hipparcos to Gaia

Hipparcos, the first ever experiment of global astrometry, was launched by ESA (European Space Agency) in 1989 and its results published in 1997 (Perryman et al. in Astron. Astrophys. 323:L49, 1997; Perryman & ESA (eds.) in The Hipparcos and Tycho catalogues, ESA SP-1200, 1997). A new reduction was later performed using an improved satellite attitude reconstruction leading to an improved accuracy for stars brighter than 9th magnitude (van Leeuwen & Fantino in Astron. Astrophys. 439:791, 2005; van Leeuwen in Astron. Astrophys. 474:653, 2007a). The Hipparcos Catalogue provided an extended dataset of very accurate astrometric data (positions, trigonometric parallaxes and proper motions), enlarging by two orders of magnitude the quantity and quality of distance determinations and luminosity calibrations. The availability of more than 20 000 stars (22 000 for the original catalogue, 30 000 for the re-reduction) with a trigonometric parallax known to better than 10% opened the way to a drastic revision of our 3-D knowledge of the solar neighbourhood and to a renewal of the calibration of many distance indicators and age estimations. The prospects opened by Gaia, the next ESA cornerstone, planned for launch in 2013 (Perryman et al., in Astron. Astrophys. 369:339, 2001), are still much more dramatic: a billion objects with systematic and quasi simultaneous astrometric, spectrophotometric and spectroscopic observations, about 150 million stars with expected distances to better than 10%, all over the Galaxy. All stellar distance indicators, in very large numbers, will be directly measured, providing a direct calibration of their luminosity and making possible detailed studies of the impacts of various effects linked to chemical element abundances, age or cluster membership. With the help of simulations of the data expected from Gaia, obtained from the mission simulator developed by DPAC (Gaia Data Processing and Analysis Consortium), we will illustrate what Gaia can provide with some selected examples.     

Three new late-type hypervelocity star candidates from Gaia DR2 with refined selection criteria

Several dozen hypervelocity star(HVS) candidates have been reported based on the second data release of Gaia(Gaia DR2). However, it has been proven that the radial velocities of some Gaia HVS candidates are not reliable. In this paper, we employ refined astrometric criteria to re-examine Gaia DR2,arriving at a more reliable sample of HVS and high velocity star candidates than those found by previous authors. We develop a method called Binary Escape Probability Analysis to identify some HVS candidates.This method allows us to work with stars having only two epochs of measured radial velocity. These stars were usually discarded in previous similar studies. A scrutiny of our final results sheds light on selection effects present in our studies, which we propose to be the focus of future studies. In total, we find three late-type(2 G-type and 1 K-type) HVS and 21 high velocity star candidates, 3 and 11 of which are new,respectively. Judging by their historical trajectories, which we calculate, all three HVS candidates could not have had Galactic center origins. Further monitoring is required to confirm their status.     

A parameter database for large scientific projects: application to the Gaia space astrometry mission

The parallel development of many aspects of a complex space science mission like Gaia, which includes numerous participants in ESA, industrial companies, and a large and active scientific collaboration throughout Europe, makes keeping track of the many design changes, instrument and operational parameters, and numerical values for the data analysis and simulations, a challenging but crucially important problem. A comprehensive, easily-accessible, up-to-date, and definitive compilation of a large range of numerical quantities is required, and the Gaia parameter database has been established to satisfy these needs. The database is a centralised repository containing, besides mathematical, physical, and astronomical constants, many satellite and subsystem design parameters. Version control provides both a ‘live’ version with the most recent parameters, as well as previous ‘reference’ versions of the full database contents. Query results are formatted by default in HTML, while an important feature is that data can also be retrieved as Java, ANSI-C, C++, Ruby, or XML structures for direct inclusion into software codes, such that all collaborating scientists can use the retrieved database parameters and values directly linked to computational routines.     

Asteroid mass determination with the Gaia mission: A simulation of the expected precisions

The ESA astrometric mission Gaia, due for a launch in late 2011, will observe a huge number of asteroids (∼350,000 brighter than V<20) with an unprecedented positional precision (at the sub-milliarcsecond level). This precision will play an important role for the mass determination of about hundred minor planets with a relative precision better than 50%. Presently, due primarily to their perturbations on Mars, the uncertainty in the masses of the largest asteroids is the limiting factor in the accuracy of the solar system ephemerides. Besides, such high precision astrometry will enable to derive direct measurements of the masses of the largest asteroids which are of utmost significance for the knowledge of their physical properties. The method for computing the masses is based on the analysis of orbital perturbations during close encounters between massive asteroids (perturbers) and several smaller minor planets (targets). From given criteria of close approaches selection, we give the list of asteroids for which the mass can be determined, and the expected precision of these masses at mission completion. We next study the possible contribution of the ground-based observations for the mass determination in some special observation cases of close approaches.     

Study of high energy phenomena from near space using low-cost meteorological balloons

Indian Centre for Space Physics has taken a novel strategy to study low energy cosmic rays and astrophysical X-ray sources which involve very light weight payloads up to about five kilograms on board a single or multiple balloons which are used for meteorological purposes. The mission duration could be anywhere from 3-12 hours. Our strategy provides extreme flexibility in mission preparation and its operation using a very economical budget. There are several limitations but our innovative approach has been able to extract significant amount of scientific data out of these missions. So far, over one hundred missions have been completed by us to near space and a wealth of data has been collected. The payloads are recovered and are used again. Scientific data is stored on board computer and the atmospheric data or payload location is sent to ground in real time. Since each mission is different, we present here the general strategy for a typical payload and provide some results we obtained in some of these missions.