Stratigraphy, chronology, and sedimentology of ignimbrites from the white trachytic tuff, Roccamonfina Volcano, Italy

We describe the stratigraphy, chronology, and grain size characteristics of the white trachytic tuff (WTT) of Roccamonfina Volcano (Italy). The pyroclastic rock was emplaced between 317 and 230 Ma BP during seven major eruptive events (units A to G) and three minor events (units BC, CD, and DE). These units are separated by paleosol layers and compositionally well-differentiated pyroclastic successions. Stratigraphic control is favored by the occurrence at the base of major units of marker layers. Four WTT units (1 to 4) occur within the central caldera. These are not positively correlated with specific extracaldera units.The source of most of the WTT units was the central caldera. Units B and C were controlled by the western wall of the caldera, whereas units D and E were able to overcome this barrier, spreading symmetrically along the flanks of MC. The maximum pumice size (MP) of units increases with distance from the caldera, whereas the maximum lithic size (ML) decreases. MP and ML of the marker layer of unit D (MKDa–MKDp) do not show any systematic variations with respect to the central caldera. In contrast, the thickness of surge MKDa decreases with distance from the source, and MKDp accumulates to the north of MC probably controlled, respectively, by mobility-transport power and by wind blowing northwards.The grain size characteristics of the WTT deposits are used for classifying the units. There is no systematic variation of the grain size as a function of stratigraphic height either among units or within single units. Large variation of components in subunit E1, with repetitive alternation of pyroclastic flow to surge through fallout vs. surge deposits, suggests that the process of eruption took place in a complex or piecemeal fashion.Pumice concentration zones (PCZ) occur at all WTT levels on the volcano, but they are much thicker and pumice clasts are much larger within the central caldera. These were probably originated by the disruption of lava (flow or dome) to pumice fragments and fine ash due to sudden depressurization and interaction with lake waters of the molten lava. Local basal PCZ are, in some cases, similar to the lapilli-rich “layer 1P” that has been described elsewhere, and may have been deposited from currents transitional between pyroclastic surge and flow. Other basal PCZ formed in response to small undulations in the substrate, or can be originated by fallout. Lenticular PCZ within ignimbrite interiors and tops are interpreted to record marginal pumice levees and pumice rafts, some of which were buried by subsequant pyroclastic flows.Lithic concentration zones (LCZ) also occur at various stratigraphic height within the extracaldera ignimbrites, whereas intracaldera LCZ are absent, probably due to the fact that ignimbrite currents are strongly energetic and erosive near vent. LCZ at the top of basal inversely graded layers are formed by mechanical sieving or dispersive pressure in response to variable velocity gradients and particle concentration gradients (a segregation process). Coarse LCZ and coarse lithic breccias (LB), that reside in the interior or tops of pyroclastic flows and that occur in medial to distal areas, are interpreted to be the result of slugs of lithic-rich debris introduced by vent collapse or rockslides into the moving pyroclastic flows along their flow paths. These LCZ become mixed to varying degrees due to differential densities and velocities relative to the pyroclastic flows (desegregation processes).     

An ignimbrite veneer deposit: The trail-marker of a pyroclastic flow

The term “ignimbrite veneer deposit” (IVD) is proposed for a new kind of pyroclastic deposit which is found associated with, and passes laterally into, Taupo ignimbrite of valley pond type in New Zealand. It forms a thin layer mantling the landscape over 15,000 km², and is regarded as the deposit from the trailing “tail” of a pyroclastic flow, where a relaxation of shear stress favoured the deposition of the basal part of the flow. The IVD differs little in grain-size from the associated ignimbrite, but it shows a crude internal stratification attributed to the deposition of a succession of layers, one after the passage of each pulse of the pyroclastic flow. It locally contains laterally-discontinuous lenses of coarse pumice (“lee-side lenses”) on the far-vent side of topographic obstacles. In nearvent exposures the Taupo IVD shows lensoid and cross-stratified bed-forms even where it stands on a planar surface, attributed to deposition from a flow travelling at an exceedingly high velocity.An IVD can be distinguished from a poorly sorted pyroclastic fall deposit because the beds in it show more rapid lateral variations in thickness, it may show a low-angle cross-stratification, and it contains carbonised wood from trees not in the position of growth; from the deposit of a wet base surge because it lacks vesicles and strong antidune-like structures and contains carbonised vegetation, and from a hot and dry pyroclastic surge deposit because it possesses a high content of pumice and “fines”.The significance of an IVD is that it records the passage of a pyroclastic flow, where the flow itself has moved farther on.     

Factors governing the flow lineation of a large-scale pyroclastic flow — An example in the ata pyroclastic flow deposit,Japan

Schmincke andSwanson (1967) explained laminar flowage structures as indicators for flow direction of pyroclastic flows that show a radial flow pattern away from the source. Several other authors have reported similar examples, but the influence of pre-flow topographic relief has not been analyzed. Flow lineations were measured for the Ata pyroclastic flow deposit, southwestern Japan. This deposit has covered an undulating basement topography. Preferred orientation of crystals and lithic fragments were measured on thin sections cut parallel to sedimentary layering. The following three factors which control the flow lineation have been recognized. 1) Flow lineations oriented radially away from the source, as described by previous authors, were obtained only for samples collected from the surface of the pyroclastic flow plateau where the basement valleys were nearly filled by earlier flow units. 2) Lineations near the floor of narrow valleys were parallel to the strike of the valley. 3) Flow lineations near the wall of valleys tend to be parallel to the dip of the valley walls. These data suggest that the initial radial movement of pyroclastic flows from the source gradually changes direction to parallel the strike of deep valleys due to confining effect of valley wall. Flows which are trapped within a valley, tends to move towards the bottom of the valley just prior to the final settlement. After the basement topographic relief has been filled up with earlier flow units, the later flows maintain their original radial movement until final settlement.     

The entrance of pyroclastic flows into the sea, II. theoretical considerations on subaqueous emplacement and welding

The submarine counterparts of late Quaternary subaerial pyroclastic flow deposits off the western flanks of Dominica, Lesser Antilles, have been investigated by 3.5 kHz seismic profiling and dredging (cruise EN20 of R/V “Endeavor”). Block-and-ash flow deposits formed by dome collapse and a welded ignimbrite from a prominent fan at Grande Savanne, Dominica. This fan can be traced underwater as a major constructional ridge (2–4 km wide and 200–400 m thick) to over 13 km offshore at a water depth of 1800 m. The submarine ridge has a volume of 14 km³ and has the characteristic morphology of a debris flow apron composed of several individual units. The evidence suggests that pyroclastic flows can move underwater without losing their essential character.     

Instantaneous dynamic pressure effects on the behaviour of lithic boulders in pyroclastic flows: the Abrigo Ignimbrite,Tenerife, Canary Islands

A method for estimating the instantaneous dynamic pressure near the base of ancient pyroclastic flows, using large lithic boulders from the late Pleistocene Abrigo Ignimbrite, is proposed here. The minimum instantaneous dynamic pressure is obtained by determining the minimum aerodynamic drag force exerted by a pyroclastic flow onto a stationary boulder that will allow the boulder to overcome static friction with the underlying substrate, and move within the flow. Consideration is given to the properties of the boulder (shape, roughness, size, density and orientation relative to the flow), substrate (type and hill slope angle), boulder-substrate interface (looseness of boulder, coefficient of static friction) and flow (coefficient of aerodynamic drag). Nineteen boulders from massive, lithic-rich ignimbrite deposits at two localities on Tenerife were assessed in this study. Minimum dynamic pressures required for Abrigo pyroclastic flows to move these boulders ranged from 5 to 38 kPa, which are comparable to dynamic pressures previously calculated from observations of the damage caused by recent pyroclastic flows. Considering the maximum possible range in flow density, the derived minimum velocity range for the Abrigo pyroclastic flows is 1.3 to 87 m s⁻¹.     

Lithic breccias in pyroclastic flow deposits on St. Kitts,West Indies

Lithic-rich breccias are described from within a sequence of young (2000–3000 yrs B.P.) scoria and ash flow deposits erupted from Mount Misery and an older pumice and ash flow deposit (ignimbrite) on St. Kitts. Cross sections constructed through pyroclastic flow fans in well-exposed sea cliffs 4–6 km from the vent show that the lithic breccias are lensoid deposits which seem to occur as channel-shaped accumulations (up to > 20 m thick and > 150 m wide) within flow units. The best-developed example infills a deeply incised channel cut into older flow units. The coarsest lithic breccias are clast supported and fines depleted and grade laterally and vertically through finer-grained, matrix-supported breccias into scoria and ash flow deposits. Coarse scoria-concentration zones mainly occur at the tops of scoria and ash flow units but also at the bases, and gas-segregation pipes are common. The lithic breccias are a type of body-concentration deposit as they pass laterally into normal scoria and ash flow deposits and, where best developed, clearly occur above a reversely graded basal shear zone or layer. Grain-size studies indicate the lithic breccias and parent flows are strongly fines depleted and were highly fluidized. We suggest this may be a feature of many Lesser Antillean pyroclastic flows because of increased turbulence-induced fluidization resulting from a high degree of surface roughness caused by the steep (up to 40 °) irregular slopes, densely vegetated sinuous gullies of the tropical volcanoes, and ingestion and ignition of large amounts of lush vegetation. Accumulation of batches of lithics concentrated in the highly fluidized flows began at the break in slope where flows moved from gullies across hydraulic jumps onto the outer coastal flanks. The accumulations of breccias continued to move and be channelled down the central parts of the flows. Initially, on crossing onto the lower slopes, some of these flows seem to have had very powerfully erosive, nondepositional heads, and in the extreme example a deep channel as long as 1–2 km may have cut through underlying flow units at least as far as the present coastline. Much of the overriding remainder of the flow then drained away laterally. Thin, fine-grained ash flow deposits may form a marginal overbank facies to the pyroclastic flow fans.     

Origin and stratigraphy of phreatomagmatic deposits at the Pleistocene Sinker Butte Volcano, Western Snake River Plain, Idaho

Sinker Butte is the erosional remnant of a very large basaltic tuff cone of middle Pleistocene age located at the southern edge of the western Snake River Plain. Phreatomagmatic tephras are exposed in complete sections up to 100 m thick in the walls of the Snake River Canyon, creating an unusual opportunity to study the deposits produced by this volcano through its entire sequence of explosive eruptions. The main objectives of the study were to determine the overall evolution of the Sinker Butte volcano while focusing particularly on the tephras produced by its phreatomagmatic eruptions. Toward this end, twenty-three detailed stratigraphic sections ranging from 20 to 100 m thick were examined and measured in canyon walls exposing tephras deposited around 180° of the circumference of the volcano.Three main rock units are recognized in canyon walls at Sinker Butte: a lower sequence composed of numerous thin basaltic lava flows, an intermediate sequence of phreatomagmatic tephras, and a capping sequence of welded basaltic spatter and more lava flows. We subdivide the phreatomagmatic deposits into two main parts, a series of reworked, mostly subaqueously deposited tephras and a more voluminous sequence of overlying subaerial surge and fall deposits. Most of the reworked deposits are gray in color and exhibit features such as channel scour and fill, planar-stratification, high and low angle cross-stratification, trough cross-stratification, and Bouma-turbidite sequences consistent with their being deposited in shallow standing water or in braided streams. The overlying subaerial deposits are commonly brown or orange in color due to palagonitization. They display a wide variety of bedding types and sedimentary structures consistent with deposition by base surges, wet to dry pyroclastic fall events, and water saturated debris flows.Proximal sections through the subaerial tephras exhibit large regressive cross-strata, planar bedding, and bomb sags suggesting deposition by wet base surges and tephra fallout. Medial and distal deposits consist of a thick sequence of well-bedded tephras; however, the cross-stratified base-surge deposits are thinner and interbedded within the fallout deposits. The average wavelength and amplitude of the cross strata continue to decrease with distance from the vent. These bedded surge and fall deposits grade upward into dominantly fall deposits containing 75–95% juvenile vesiculated clasts and localized layers of welded spatter, indicating a greatly reduced water-melt ratio. Overlying these “dryer” deposits are massive tuff breccias that were probably deposited as water saturated debris flows (lahars). The first appearance of rounded river gravels in these massive tuff breccias indicates downward coring of the diatreme and entrainment of country rock from lower in the stratigraphic section. The “wetter” nature of these deposits suggests a renewed source of external water. The massive deposits grade upward into wet fallout tephras and the phreatomagmatic sequence ends with a dry scoria fall deposit overlain by welded spatter and lava flows.Field observations and two new ⁴⁰Ar–³⁹Ar incremental heating dates suggest the succession of lavas and tephra deposits exposed in this part of the Snake River canyon may all have been erupted from a closely related complex of vents at Sinker Butte. We propose that initial eruptions of lava flows built a small shield edifice that dammed or disrupted the flow of the ancestral Snake River. The shift from effusive to explosive eruptions occurred when the surface water or rising ground water gained access to the vent. As the river cut a new channel around the lava dam, water levels dropped and the volcano returned to an effusive style of eruption.     

Emplacement of small-volume pyroclastic flows at Laacher See (East-Eifel,Germany)

We distinguish three eruptive units of pyroclastic flows (T1, T2, and T3; T for trass) within the late Quaternary Laacher See tephra sequence. These units differ in the chemical/mineralogical composition of the essential pyroclasts ranging from highly differentiated phonolite in T1 to mafic phonolite in T3. T1 and T2 flows were generated during Plinian phases, and T3 flows during a late Vulcanian phase. The volume of the pyroclastic flow deposits is about 0.6 km³. The lateral extent of the flows from the source vent decreases from > 10 km (T1) to < 4.5 km (T3). In the narrow valleys north of Laacher See, the total thickness of the deposits exceeds 60 m.At least 19 flow units in T1, 6 in T2, and 4 in T3 can be recognized at individual localities. Depositional cycles of 2 to 5 flow units are distinguished in the eruptive units. Thickness and internal structure of the flow units are strongly controlled by topography. Subfacies within flow units such as strongly enriched pumice and lithic concentration zones, dust layers, lapilli pipes, ground layers, and lithic breccias are all compositionally related to each other by enrichment or depletion of clasts depending on their size and density in a fluidized flow. While critical diameters of coarse-tail grading were found to mark the boundary between the coarse nonfluidized and the finer fluidized grain-size subpopulations, we document the second boundary between the fluidized and the very fine entrained subpopulations by histograms and Rosin-Rammler graphs. Grain-size distribution and composition of the fluidized middle-size subpopulations remained largely unchanged during transport.Rheological properties of the pyroclastic flows are deduced from the variations in flow-unit structure within the valleys. T1 flows are thought to have decelerated from 25 m/s at 4 km to < 15 m/s at 7 km from the vent; flow density was probably 600–900 kg/m³, and viscosity 5–50 P. The estimated yield strength of the flows of 200– > 1000 N/m² is consistent with the divergence of lithic size/distance curves from purely Newtonian models; the transport of lithics must be treated as in a Bingham fluid. The flow temperature probably decreased from T1 (300°–500°C) to T3 (<200°C).A large-scale longitudinal variation in the flow units from proximal through medial to distal facies dominantly reflects temporal changes during the progressive collapse of an eruption column. Only a small amount of fallout tephra was generated in the T1 phase of eruption. The pyroclastic flows probably formed from relatively low ash fountains rather than from high Plinian eruption columns.     

Gas release rates from pyroclastic flows: a assessment of the role of fluidisation in their emplacement

Estimates are presented for the rates of release of dissolved water from the particles in a pyroclastic flow by diffusion. Velocities of gas escaping from pyroclastic flows of different thicknesses are calculated. For quite small residual gas contents (0.2 to 0.8% H₂O), gas velocities of 10 to over 100 cm/sec during the first 10³ sec of release are estimated for flows of thickness 1 to 20 m, which experimental studies demonstrate are the velocities required to fluidise fine to medium ash. Flows with high residual gas contents or large volume (thick flows) are likely to be substantially fluidised by exsolving gas. 30% to over 60% of the particles in such flows are predicted to be fluidised. Fluidisation is thus believed to be an important mechanism in the flow and in determining the mobility of the large magnitude, prehistoric pyroclastic flows which formed extensive ignimbrite sheets. Small pyroclastic flows, however, of the magnitude observed in several historic eruptions are not believed to be fluidised, because of their low residual gas contents, small volume, and the substantial amount of cooling that occurs during their emplacement.     

A gigantic Bezymianny-type event at the beginning of modern volcan Popocatepetl

The history of volcan Popocatepetl can be divided into two main periods: the formation of a large primitive volcano — approximatively 30 km wide — on which is superimposed a modern cone (6–8 km in diameter and 1700m high). A major event of Bezymianny type marks the transition between these two dissimilar periods.The activity of the primitive volcano was essentially effusive and lasted several hundred thousands of years. The total volume of products ejected by the volcano is of the order of 500–600 km³. Its last differentiated magmas are dacitic.A gigantic debris flow (D.F.) spread on the southern side is related to the Bezymianny-type event which destroyed the summit area of the ancient edifice. An elliptical caldera ( 6.5 × 11 km wide) was formed by the landslide. Its deposits, with a typical hummocky surface, cover 300 km² for a volume of 28–30 km³. Numerous outcrops belonging to this debris flow show “slabs” of more or less fractured and dislocated rocks that come from the primitive volcano. These deposits are compared to two studied debris flows of similar extent and volume: the Mount Shasta and Colima's D.F.This eruption takes a major place in the volcanologic and magmatic history of Popocatepetl: pyroclastic products of surge-type with “laminites” and crude layers, ashflows, and pumiceous airfall layers are directly related to this event and begin the history of the modern volcano probably less than 50,000 years ago. In addition, a second andesitic and dacitic phase rose both from the central vent — forming the basis of modern Popo — and from lateral vents.The terminal cone is characterized by long periods of construction by lava flows alternating with phases of destruction, the duration of these episodes being 1000 to 2000 years. The cone is composed of two edifices: the first, volcan El Fraile, began with effusive activity and was partly destroyed by three periods of intense explosive activity. The first period occurred prior to 10.000 years B.P., the second from 10.000 to 8000 years B.P. and the third from 5000 to 3800 years B.P. Each period of destruction shows cycles producing collapsing pyroclastic flows or nuées of the St Vincent-type related to the opening of large craters, plinian air-fall deposits and minor lava flows. The second edifice, the summit Popo, produced lava flows until 1200 years B.P. and since that time, entered into an explosive period. Two cataclysmic episodes, each including major pyroclastic eruptions, occurred 1200 and 900–1000 years ago. During the Pre-Hispanic and historic times effusive activity was restricted entirely to the summit area alternating with plinian eruptions. Nevertheless, despite the quiet appearance of the volcano, the last period of pyroclastic activity which started 1200 years ago may not have ended and can be very dangerous for the nearby populations.     

Deformation structures in shale bed indicate flow direction of overlying Miocene subaqueous pyroclastic flow

Thrusts, pinch-and-swell structures and undulations are present within a 2-m-thick layered shale bed of Miocene age that is overlain by a rhyolite subaqueous pyroclastic flow deposit 2–3 m thick. The deformation structures were caused by loading and lateral compression by the subaqueous pyroclastic flow, probably analogous to those observed in layered muds deformed by a sand mass advancing across them. Prominent thrusts strike east-west and dip south, and the crests of undulations strike east-west, indicating that the subaqeuous pyroclastic flow moved northward.     

Depositional processes and gas pore pressure in pyroclastic flows: an experimental perspective

The depositional processes and gas pore pressure in pyroclastic flows are investigated through scaled experiments on transient, initially fluidized granular flows. The flow structure consists of a sliding head whose basal velocity decreases backwards from the front velocity (U _f) until onset of deposition occurs, which marks transition to the flow body where the basal deposit grows continuously. The flows propagate in a fluid-inertial regime despite formation of the deposit. Their head generates underpressure proportional to U _f ² whereas their body generates overpressure whose values suggest that pore pressure diffuses during emplacement. Complementary experiments on defluidizing static columns prove that the concept of pore pressure diffusion is relevant for gas-particle mixtures and allow characterization of the diffusion timescale (t _d) as a function of the material properties. Initial material expansion increases the diffusion time compared with the nonexpanded state, suggesting that pore pressure is self-generated during compaction. Application to pyroclastic flows gives minimum diffusion timescales of seconds to tens of minutes, depending principally on the flow height and permeability. This study also helps to reconcile the concepts of en masse and progressive deposition of pyroclastic flow units or discrete pulses. Onset of deposition, whose causes deserve further investigation, is the most critical parameter for determining the structure of the deposits. Even if sedimentation is fundamentally continuous, it is proposed that late onset of deposition and rapid aggradation in relatively thin flows can generate deposits that are almost snapshots of the flow structure. In this context, deposition can be considered as occurring en masse, though not strictly instantaneously.     

A facies interpretation of the eruption and emplacement mechanisms of the upper part of the Neapolitan Yellow Tuff,Campi Flegrei,southern Italy

This study focuses on the upper part, Member B, of the Neapolitan Yellow Tuff (NYT). Detailed measurements of stratigraphic sections within the unlithified pozzolana facies show that Member B is composed of at least six distinct depositional units which each record a complex fluctuation between different styles of deposition from pyroclastic density flows. Six lithofacies have been identified: (1) massive valleyponded facies, the product of non-turbulent flows; (2) inverse-graded facies formed by flows that were turbulent for the majority of transport but were deposited through a non-tubulent basal regime; (3) regressive sand-wave facies, the product of high-concentration, turbulent flows; (4) stratified facies, the product of deposition from turbulent, low-particle-concentration, flows; (5) particle aggregate and (6) vesicular ash lithofacies, both of which are considered to have formed by deposition from turbulent, low-concentration flows. Although the whole eruption may have been phreatomagmatic, facies 1–4 are interpreted to be the product of dry eruptive activity, whereas facies 5 and 6 are considered to be of wet phreatomagmatic eruptive phases. Small-scale horizontal variations between facies include inverse-graded lithofacies that pass laterally into regressive sand-wave structures and stratified deposits. This indicates rapid transition from non-turbulent to turbulent deposition within the same flow. Thin vesicular ash and particle aggregate layers pass laterally into massive valley-ponded vesicular lithofacies, suggesting contemporaneous wet pyroclastic surges and cohesive mud flows. Three common vertical facies relations were recognised. (1) Massive valley-ponded and inverse-graded facies are overlain by stratified facies, suggesting decreasing particle concentration with time during passage of a flow. (2) Repeated vertical gradation from massive up into stratified facies and back into massive beds, is indicative of flow fluctuating between non-turbulent and turbulent depositional conditions. (3) Vertical alternation between particle aggregates and vesicular facies is interpreted as the product of many flow pulses, each of which involved deposition of a single particle aggregate and vesicular ash layer. It is possible that the different facies record stages in a continuum of flow processes. The deposits formed are dependent on the presence, thickness and behaviour of a high-concentration, non-turbulent boundary layer at the base of the flow. The end members of this process are (a) flows that transported and deposited material from a non-turbulent flow regime and (b) flows that transported and deposited material from a turbulent flow regime.     

The significance of vitric-enriched air-fall ashes associated with crystal-enriched ignimbrites

A distinctive type of fine-grained air-fall ash is found intimately associated with many ignimbrites. They have crystal/glass ratios systematically lower than artificially crushed pumice from the same ignimbrites. The crystal enrichment found in crystal-bearing ignimbrites indicates substantial losses of the vitric component, amounting to an average of at least 35% by weight of the original juvenile material, and this lost material is believed to occur in the ash-fall deposits. These ashes thus complement ignimbrite, and are here called “co-ignimbrite ashes”. The loss is believed to take place during ignimbrite eruptions as a result of: (1) the escape of fine ash and gas above a collapsing eruptive column; (2) the preferential entry of fine vitric ash into an upper turbulent cloud when (immediately following column collapse) the segregation of a dense pyroclastic flow from an initially highly turbulent, low-concentation density flow takes place; (3) the elutriation of fine vitric ash (generated in part within the pyroclastic flow) from the fluidised flow. Ash from all three mechanisms would be expected to rise to a great height in convective plumes and be dispersed by winds to produce extensive, vitric-enriched ash-fall deposits.The data indicate that the co-ignimbrite ashes must have volumes comparable with those of ignimbrites, and examples are given of particularly large ash-fall deposits (including some found in deep-sea cores) associated with large ignimbrites which may be of this type rather than fall-out from a preceding plinian phase as hitherto thought.     

Locating pyroclastic flows on Soufriere Hills Volcano, Montserrat, West Indies, using amplitude signals from high dynamic range instruments

Pyroclastic flows are located using amplitude signals from a seven-station high dynamic range seismograph array located 1.9–6.1 km from Soufriere Hills Volcano in Montserrat, West Indies. Locations are determined by measuring the seismograph signal amplitude for an event recorded at several stations in a moving time window analysis. For a given window, the measured amplitudes are corrected to a trial source location by removing the effect of the surface wave geometric spreading, instrument gain, and the attenuation at calculated travel-times. The trial source location is then compared to other trial locations via an iterative localised grid search where the root-mean-squared amplitude residual (δA) is minimised. The process is repeated for subsequent time steps resulting in a best-fit event location and size through time. The method has been tested on four small events occurring on April 8, 1999, August 12, 1999, February 25, 2001, and July 4, 2001, when visual observations of pyroclastic flows coincided with good seismograph station coverage (number of stations 5, azimuthal gap <160°). Based on the location results the four events propagated 0.5, 1.4, 1.3 and 1.0 km from the dome, and had maximum attenuation-corrected reduced displacements (D_RQ) of 9.0, 2.8, 6.9 and 2.3 cm² and maximum pyroclastic flow velocities of 7, 30, 20 and 8 ms⁻¹, respectively. A time-lapse video of the event of August 12, 1999, shows that amplitude-based location through time closely matches the observed run-out distance and velocity. In contrast, amplitude-based locations for the events of April 8, 1999, and July 4, 2001, underestimated the actual flow run-out by 1.5 km. Underestimation of the true run-out distance is probably due to both the increased distribution of sources as coherent dome material disaggregates into many blocks, and signal contamination from other sources. Results indicate that pyroclastic flows and rockfalls can be located using amplitude signals from high dynamic range seismograph stations yielding estimates of size and trajectory, regardless of visibility conditions on the volcano. This new method is being tested as a hazard mitigation and research tool on Montserrat.     

Sedimentology of the Krakatau 1883 submarine pyroclastic deposits

The majority of tephra generated during the paroxysmal 1883 eruption of Krakatau volcano, Indonesia, was deposited in the sea within a 15-km radius of the caldera. Two syneruptive pyroclastic facies have been recovered in SCUBA cores which sampled the 1883 subaqueous pyroclastic deposit. The most commonly recovered facies is a massive textured, poorly sorted mixture of pumice and lithic lapilli-to-block-sized fragments set in a silty to sandy ash matrix. This facies is indistinguishable from the 1883 subaerial pyroclastic flow deposits preserved on the Krakatau islands on the basis of grain size and component abundances. A less common facies consists of well-sorted, planarlaminated to low-angle cross-bedded, vitric-enriched silty ash. Entrance of subaerial pyroclastic flows into the sea resulted in subaqueous deposition of the massive facies primarily by deceleration and sinking of highly concentrated, deflated components of pyroclastic flows as they traveled over water. The basal component of the deposit suggests no mixing with seawater as inferred from retention of the fine ash fraction, high temperature of emplacement, and lack of traction structures, and no significant hydraulic sorting of components. The laminated facies was most likely deposited from low-concentration pyroclastic density currents generated by shear along the boundary between the submarine pyroclastic flows and seawater. The Krakatau deposits are the first well-documented example of true submarine pyroclastic flow deposition from a modern eruption, and thus constitute an important analog for the interpretation of ancient sequences where subaqueous deposition has been inferred based on the facies characteristics of encapsulating sedimentary sequences.     

Rhyolitic fallout and pyroclastic density current deposits from a phreatoplinian eruption in the eastern Aegean Sea, Greece

The Kos Plateau Tuff consists of pyroclastic deposits from a major Quaternary explosive rhyolitic eruption, centred about 10 km south of the island of Kos in the eastern Aegean, Greece. Five main units are present, the first two (units A and B) were the product of a phreatoplinian eruption. The eruption style then changed to `dry' explosive style as the eruption intensity increased forming a sequence of ignimbrites and initiating caldera collapse. The final waning phase returned to phreatomagmatic eruptive conditions (unit F). The phreatomagmatic units are fine grained, poorly sorted, and dominated by blocky vitric ash, thickly ash-coated lapilli and accretionary lapilli. They are non-welded and were probably deposited at temperatures below 100°C. All existing exposures occur at distances between 10 km and 40 km from the inferred source. Unit A is a widespread (>42 km from source), thin (upwind on Kos) to very thick (downwind), internally laminated, dominantly ash bed with mantling, sheet-like form. Upwind unit A and the lower and middle part of downwind unit A are ash-rich (ash-rich facies) whereas the upper part of downwind unit A includes thin beds of well sorted fine pumice lapilli (pumice-rich facies). Unit A is interpreted to be a phreatoplinian fall deposit. Although locally the bedforms were influenced by wind, surface water and topography. The nature and position of the pumice-rich facies suggests that the eruption style alternated between `wet' phreatoplinian and `dry' plinian during the final stages of unit A deposition.Unit B is exposed 10–19 km north of the inferred source on Kos, overlying unit A. It is a thick to very thick, internally stratified bed, dominated by ash-coated, medium and fine pumice lapilli in an ash matrix. Unit B shows a decrease in thickness and grain size and variations in bedforms downcurrent that allow definition of several different facies and laterally equivalent facies associations. Unit B ranges from being very thick, coarse and massive or wavy bedded in the closest outcrops to source, to being partly massive and partly diffusely stratified or cross-bedded in medial locations. Pinch and swell, clast-supported pumice layers are also present in medial locations. In the most distal sections, unit B is stratified or massive, and thinner and finer grained than elsewhere and dominated by thickly armoured lapilli. Unit B is interpreted to have been deposited from an unsteady, density stratified, pyroclastic density current which decelerated and progressively decreased its particle load with distance from source. Condensation of steam during outflow of the current promoted the early deposition of ash and resulted in the coarser pyroclasts being thickly ash-coated. The distribution, texture and stratigraphic position of unit B suggest that the pyroclastic density current was generated from collapse of the phreatoplinian column following a period of fluctuating discharge when the eruptive activity alternated between `wet' and `dry'. The pyroclastic density current was transitional in particle concentration between a dilute pyroclastic surge and a high particle concentration pyroclastic flow. Unidirectional bedforms in unit B suggest that the depositional boundary was commonly turbulent and in this respect did not resemble conventional pyroclastic flows. However, unit B is relatively thick and poorly sorted, and was deposited more than 19 km from source, implying that the current comprised a relatively high particle concentration and in this respect, did not resemble a typical pyroclastic surge.     

A numerical model for the dynamics of pyroclastic flows at Galeras Volcano,Colombia

This paper presents a two-dimensional model for dilute pyroclastic flow dynamics that uses the compressible Navier–Stokes equation coupled with the Diffusion–Convection equation to take into account sedimentation. The model is applied to one of the slopes of Galeras Volcano to show: (1) the temperature evolution with the time; (2) dynamic pressure change; and (3) particle concentration along the computer domain from the eruption to the impact with a topographic barrier located more than 16 km from the source. Two initial solid volumetric fractions are modeled. For both cases, some of the structures located more distant than 10 km could survive, but in all cases the flow remains deadly. This paper shows that a dynamical model of pyroclastic flows can be implemented using personal computers.     

Basaltic pyroclastic flows of Fuji volcano, Japan: characteristics of the deposits and their origin

Fuji volcano is the largest active volcano in Japan, and consists of Ko-Fuji and Shin-Fuji volcanoes. Although basaltic in composition, small-volume pyroclastic flows have been repeatedly generated during the Younger stage of Shin-Fuji volcano. Deposits of those pyroclastic flows have been identified along multiple drainage valleys on the western flanks between 1,300 and 2,000 m a.s.l., and have been stratigraphically divided into the Shin-Fuji Younger pyroclastic flows (SYP) 1 to 4. Downstream debris flow deposits are found which contain abundant material derived from the pyroclastic flow deposits. The new¹⁴C ages for SYP1 to SYP4 are 3.2, 3.0, 2.9, and 2.5 ka, respectively, and correspond to a period where explosive summit eruptions generated many scoria fall deposits mostly toward the east. The SYP1 to SYP4 deposits consist of two facies: the massive facies is about 2 m thick and contains basaltic bombs of less than 50 cm in size, scoria lapilli, and fresh lithic basalt fragments supported in an ash matrix; the surge facies is represented by beds 1 to 15 cm thick, consisting mainly of ash with minor amount of fine lapilli. The bombs and scoria are 15 to 30% in volume within the massive facies. The ashes within the SYP deposits consist largely of comminuted basalt lithics and crystals that are derived from the Middle-stage lava flows exposed at the western flanks. SYP1 to SYP4 were only dispersed down the western flanks. The reason for this one-sided distribution is the asymmetric topography of the edifice; the western slopes of the volcano are the steepest (over 34 degrees). Most pyroclastic materials cannot rest stably on the slopes steeper than 33 degrees. Therefore, ejecta from the explosive summit eruptions that fell on the steep slopes tumbled down the slopes and were remobilized as high-temperature granular flows. These flows consisted of large pyroclastics and moved as granular avalanches along the valley bottom. Furthermore, the avalanching flows increased in volume by abrasion from the edifice and generated abundant ashes by the collision of clasts. The large amount of the fine material was presumably available within the transport system as the basal avalanches propagated below the angle of repose. Taking the typical kinetic friction coefficient of small pyroclastic flows, such flows could descend the western flanks where scattered houses are below 1,000 m a.s.l. A similar type of pyroclastic flow could result if explosive summit eruptions occur in the future.Editorial responsibility: R Cioni     

A laboratory analog study of the surface morphology of lava flows extruded from point and line sources

In laboratory experiments designed to model lava flow processes, liquid polyethylene glycol wax is forced through either a small hole or a long narrow slit onto the base of a tank of cold water, where it spreads laterally while cooling and solidifying at its surface. We observe the surface structure of the flow, and its dependence on the flow rate, thermal conditions and basal roughness. In each case, solidification of a crust during spreading gives rise to a number of different surface morphologies, each of which forms under a restricted range of conditions. The dominant morphologies, referred to as “pillows”, “rifts”, transverse folds, and marginal levees, correspond to features observed on natural lava flows. Results for radial spreading over a rough base and for spreading in two directions from the line source over both smooth and rough bases complement those reported earlier for radial spreading of solidifying wax from a point source on a smooth base. Together they indicate a robust dependence of morphology on the distance from the vent at which solid crust begins to form. This distance is, in turn, determined by the extrusion rate, the rheology of the liquid wax (or magma), the reduced gravity, the magnitude of the surface heat flux, and the amount of cooling required to solidify the flow surface. The results also indicate factors influencing the distribution of crust and its deformation, and may provide a means by which observations of surface morphology can be used to place constraints on the emplacement conditions of lava flows.