A modelling study of hyporheic exchange pattern and the sequence,size, and spacing of stream bedforms in mountain stream networks,Oregon, USA

Studies of hyporheic exchange flows have identified physical features of channels that control exchange flow at the channel unit scale, namely slope breaks in the longitudinal profile of streams that generate subsurface head distributions. We recently completed a field study that suggested channel unit spacing in stream longitudinal profiles can be used to predict the spacing between zones of upwelling (flux of hyporheic water into the stream) and downwelling (flux of stream water into the hyporheic zone) in the beds of mountain streams. Here, we use two‐dimensional groundwater flow and particle tracking models to simulate vertical and longitudinal hyporheic exchange along the longitudinal axis of stream flow in second‐, third‐, and fourth‐order mountain stream reaches. Modelling allowed us to (1) represent visually the effect that the shape of the longitudinal profile has on the flow net beneath streambeds; (2) isolate channel unit sequence and spacing as individual factors controlling the depth that stream water penetrates the hyporheic zone and the length of upwelling and downwelling zones; (3) evaluate the degree to which the effects of regular patterns in bedform size and sequence are masked by irregularities in real streams. We simulated hyporheic exchange in two sets of idealized stream reaches and one set of observed stream reaches. Idealized profiles were constructed using regression equations relating channel form to basin area. The size and length of channel units (step size, pool length, etc.) increased with increasing stream order. Simulations of hyporheic exchange flows in these reaches suggested that upwelling lengths increased (from 2·7 m to 7·6 m), and downwelling lengths increased (from 2·9 m to 6·0 m) with increase in stream order from second to fourth order. Step spacing in the idealized reaches increased from 5·3 m to 13·7 m as stream size increased from second to fourth order. Simulated downwelling lengths increased from 4·3 m in second‐order streams to 9·7 m in fourth‐order streams with a POOL–RIFFLE–STEP channel unit sequence, and increased from 2·5 m to 6·1 m from second‐ to fourth‐order streams with a POOL–STEP–RIFFLE channel unit sequence. Upwelling lengths also increased with stream order in these idealized channels. Our results suggest that channel unit spacing, size, and sequence are all important in determining hyporheic exchange patterns of upwelling and downwelling. Though irregularities in the size and spacing of bedforms caused flow nets to be much more complex in surveyed stream reaches than in idealized stream reaches, similar trends emerged relating the average geomorphic wavelength to the average hyporheic wavelength in both surveyed and idealized reaches. This article replaces a previously published version (Hydrological Processes, 19 (17), 2915–2929 (2005) [ DOI:10.1002/hyp.5790 ]. See also retraction notice DOI:10.1002/hyp.6350 Copyright © 2006 John Wiley & Sons, Ltd.     

Retracted and replaced: A modelling study of hyporheic exchange pattern and the sequence,size, and spacing of stream bedforms in mountain stream networks,Oregon, USA

This article has been retracted and replaced. See Retraction and Replacement Notice DOI: 10.1002/hyp.6350 Studies of hyporheic exchange flows have identified physical features of channels that control exchange flow at the channel unit scale, namely slope breaks in the longitudinal profile of streams that generate subsurface head distributions. We recently completed a field study that suggested channel unit spacing in stream longitudinal profiles can be used to predict the spacing between zones of upwelling (flux of hyporheic water into the stream) and downwelling (flux of stream water into the hyporheic zone) in the beds of mountain streams. Here, we use two‐dimensional groundwater flow and particle tracking models to simulate vertical and longitudinal hyporheic exchange along the longitudinal axis of stream flow in second‐, third‐, and fourth‐order mountain stream reaches. Modelling allowed us to (1) represent visually the effect that the shape of the longitudinal profile has on the flow net beneath streambeds; (2) isolate channel unit sequence and spacing as individual factors controlling the depth that stream water penetrates the hyporheic zone and the length of upwelling and downwelling zones; (3) evaluate the degree to which the effects of regular patterns in bedform size and sequence are masked by irregularities in real streams. We simulated hyporheic exchange in two sets of idealized stream reaches and one set of observed stream reaches. Idealized profiles were constructed using regression equations relating channel form to basin area. The size and length of channel units (step size, pool length, etc.) increased with increasing stream order. Simulations of hyporheic exchange flows in these reaches suggested that upwelling lengths increased (from 2·7 m to 7·6 m), and downwelling lengths increased (from 2·9 m to 6·0 m) with increase in stream order from second to fourth order. Step spacing in the idealized reaches increased from 5·3 m to 13·7 m as stream size increased from second to fourth order. Simulated upwelling lengths increased from 4·3 m in second‐order streams to 9·7 m in fourth‐order streams with a POOL–RIFFLE–STEP channel unit sequence, and increased from 2·5 m to 6·1 m from second‐ to fourth‐order streams with a POOL–STEP–RIFFLE channel unit sequence. Downwelling lengths also increased with stream order in these idealized channels. Our results suggest that channel unit spacing, size, and sequence are all important in determining hyporheic exchange patterns of upwelling and downwelling. Though irregularities in the size and spacing of bedforms caused flow nets to be much more complex in surveyed stream reaches than in idealized stream reaches, similar trends emerged relating the average geomorphic wavelength to the average hyporheic wavelength in both surveyed and idealized reaches. Copyright © 2005 John Wiley & Sons, Ltd.     

Effects of river discharge on hyporheic exchange flows in salmon spawning areas of a large gravel‐bed river

The flow magnitude and timing from hydroelectric dams in the Snake River Basin of the Pacific north‐western US is managed in part for the benefit of salmon. The objective of this research was to evaluate the effects of Hells Canyon Dam discharge operations on hydrologic exchange flows between the river and riverbed in Snake River fall Chinook salmon spawning areas. Interactions between river water and pore water within the upper 1 m of the riverbed were quantified through the use of self‐contained temperature and water level data loggers suspended inside of piezometers. The data were recorded at 20 min intervals over a period of 200 days when the mean daily discharge was 218–605 m³ s^?1, with hourly stage changes as large as 1·9 m. Differences in head pressure between the river and riverbed were small, often within ± 2 cm. Measured temperature gradients in the riverbed indicated significant interactions between the surface and subsurface water. At the majority of sites, neither hydraulic nor temperature gradients were significantly affected by either short‐ or long‐term changes in discharge operations from Hells Canyon Dam. Only 2 of 14 study sites exhibited acute flux reversals between the river and riverbed resulting from short‐term, large magnitude changes in discharge. The findings suggest that local scale measurements may not be wholly explanatory of the hydrological exchange between the river and riverbed. The processes controlling surface water exchange at the study sites are likely to be bedform‐induced advective pumping, turbulence at the riverbed surface, and large‐scale hydraulic gradients along the longitudinal profile of the riverbed. By incorporating the knowledge of hydrological exchange processes into water management planning, regional agencies will be better prepared to manage the limited water resources among competing priorities that include salmon recovery, flood control, irrigation supply, hydropower production, and recreation. Copyright © 2007 John Wiley & Sons, Ltd.     

Impact of channel bar form and grain size variability on estimated stranding risk of juvenile brown trout during hydropeaking

Hydropeaking leads to artificial fluctuations in discharge and corresponding water levels with pronounced dewatering areas between base and peak flow along gravel bars and channel banks. In the present study, 16 hydropeaking reaches in Austria were investigated to assess possible differences in the estimated stranding risk for young of the year brown trout according to different gravel bar types and differences in microtopography roughness. Based on hydrodynamic‐numerical modelling, a predictive habitat modelling approach was implemented in the study design. Accompanied by grain size sampling along the various channel bars, a conceptual stranding risk model (SRM) was developed. The results showed that a high variability in estimated stranding risk exists for the tested sites considering discharge ratios of 1:3, 1:5 and 1:10. With respect to the discussion of establishing legal thresholds for ramping ratios in discharge, it was documented that, exemplarily, a discharge ratio base flow/peak flow of 1:5 (winter base flow conditions) could cause minor differences in the spatial extent of dewatering areas and the related estimated stranding risk for juvenile brown trout compared to a ratio of 1:2 for summer base flow conditions. Microtopographic roughness was addressed due to sampling and analysis of grain size distributions. Statistical testing of grain size distributions revealed significant differences between the surface material compositions of the investigated gravel bars. Those differences are evident, particularly for the coarser fraction (d₉₀), which is important as cover for young of the year brown trout. These aspects of grain size in habitat use and hydraulics have been addressed in the conceptual SRM. The results showed that point bar morphology, in particular, was less sensitive to the risk of stranding compared to, for example, alternating gravel bars. Considering the multiple pressures for alpine rivers, the improvement of structural features due to bar formation and related self‐forming processes is discussed as a possible alternative for future mitigation measures to reduce the negative impacts of hydropeaking. Copyright © 2014 John Wiley & Sons, Ltd.     

Modelling in‐pool temperature variability in a beaded arctic stream

This study examines the variability of in‐pool temperatures in Imnavait Creek, a beaded arctic stream consisting of small pools connected by shallow chutes, for the purpose of predicting potential impacts of climate variations on the system. To better understand heat fate and transport through this system, the dominant heat sources and sinks creating and influencing thermal stratification within even the smallest and shallowest pools must be quantified. To do this, temperature data were collected vertically within the pool water column and surrounding bed sediments during stratified conditions. These temperature and other supporting data (e.g. instream flow, weather data, and bathymetry) were used to formulate and develop an instream temperature model that captures the site‐specific processes occurring within the pools during summer low flow conditions. The model includes advective, air–water interface, and bed conduction fluxes, simplified vertical exchange between stratified pool layers, and attenuation of shortwave radiation within the water column. We present the model formulation, data collection methods used in support of model development and population, and the resulting model calibration and validation for one of the study pools. We also provide information regarding dominant heat sources and sinks and residence times of different layers within the stratified pool. We found that the dominant heat sources vary between stratified layers and that increases in thaw depths surrounding these pools due to possible climate changes can shift stratification, mixing, and instream storage dynamics, thereby influencing the fate and transport of heat and other constituents of interest (e.g. nutrients). Copyright © 2011 John Wiley & Sons, Ltd.     

Aerobic respiration in riparian exchange zones of regulated river corridors

River stage fluctuations drive surface water-groundwater exchanges within river corridors. This study evaluates how repeated daily stage fluctuations, representative of hydropeaking conditions, influence aerobic respiration of river-sourced dissolved organic carbon (DOC) in the riparian exchange zone using reactive flow and transport simulations. Over 50 hypothetical scenarios were modelled to evaluate how the duration of the daily flood signal, river DOC concentration, aquifer hydraulic conductivity and ambient groundwater flow condition affect the fate and transport of DOC and DO in the riparian aquifer. Time series subsurface snapshots highlight how the various factors influence the subsurface distribution of DOC and DO. The total mass of DOC respired per meter of river had a wide range depending on the parameters, spanning from 1.4 to 71 g over 24-h, with high hydraulic conductivity and losing ambient groundwater flow conditions favouring the largest amount of DOC respired. The ratio of DOC mass entering the riparian zone with the mass returning to the river showed that as little as 5% to as much as 76% of the DOC that enters the bank during stage fluctuations returns to the river. This return ratio is dependent on river DOC concentration, hydraulic conductivity and ambient groundwater flow. The results illustrate that stage variations due to river regulation can be a significant control on aerobic respiration in riparian exchange zones.     

Quantifying nitrogen cycling beneath a meander of a low gradient,N‐impacted,agricultural stream using tracers and numerical modelling

In watersheds impacted by nitrate from agricultural fertilizers, nitrification and denitrification may be decoupled as denitrification in the hyporheic zone is not limited to naturally produced nitrate. While most hyporheic research focuses on the 1–2 m of sediment beneath the stream bed, there are a limited number of studies that quantify nitrogen (N) cycling at larger hyporheic scales (10s of metres to kms). We conducted an investigation to quantify N cycling through a single meander of a low gradient, meandering stream, draining an agricultural watershed. Chemistry (major ions and N species) and hydrologic data were collected from the stream and groundwater beneath the meander. Evidence indicates that nearly all the shallow groundwater flowing beneath the meander originates as stream water on the upgradient side of the meander, and returns to the stream on the downgradient side. We quantified the flux of water beneath the meander using a numerical model. The flux of N into and out of the meander was quantified by multiplying the concentration of the important N species (nitrate, ammonium, dissolved organic nitrogen (DON)) by the modelled water fluxes. The flux of N into the meander is dominated by nitrate, and the flux of N out of the meander is dominated by ammonium and DON. While stream nitrate varied seasonally, ammonium and DON beneath the meander were relatively constant throughout the year. When stream nitrate concentrations are high (>2 mg litre^?1), flow beneath the meander is a net sink for N as more N from nitrate in stream water is consumed than is produced as ammonium and DON. When stream nitrate concentrations are low (<2 mg litre^?1), the flux of N entering is less than exiting the meander. On an annual basis, the meander hyporheic flow serves as a net sink for N. Copyright © 2007 John Wiley & Sons, Ltd.     

Comparative Performance Assessment of Adsorbents for CO2 Capture via Physisorption in a Diesel Engine Exhaust

The atmospheric carbon dioxide (CO₂) concentration has been consistently increasing each year throughout the world. Internal combustion (IC) engines are significant contributors to CO₂ emissions. This study explores the possibility of employing effective biomass-based adsorbents to mitigate CO₂ from a diesel engine exhaust. As a first step, two distinct agro-wastes, namely, i) corn cob and ii) sugarcane bagasse, are used to prepare inexpensive and efficient activated carbons. The two main steps in the activated carbon preparation are a) carbonization and b) activation. The derived activated carbons are subjected to discrete analytical techniques to examine their structural and textural characteristics, surface functional groups, and physical, chemical, and adsorptive properties. As a second step, the exhaust treatment chamber unit is filled with the adsorbents one by one and is connected to the exhaust of the constant pressure heat addition engine. A single-cylinder, four-stroke, naturally-aspirated, air-cooled, direct injection (DI) compression ignition (CI) engine is used in the experimental investigations. The essential findings show that ≈68 and 60% of CO₂ emissions are adsorbed in the test engine by utilizing corn cob and sugarcane bagasse adsorbents, respectively. The results show that during the D100 and JME20 operations, the prospective adsorbents can curb more than 40% of overall CO₂ emissions.     

Hydraulic parameter estimations of a 2D model validated with sedimentological findings in the point bar environment

There have been a number of flume tests of flow round bends with idealized geometry and recently hydraulic simulations of such experiment. However, studies of hydraulic models in natural river bend are rather limited because of greater complexity of the flow characteristics and lack of detailed data. In this article, we study how 2D hydraulic model and raster‐based hydraulic parameter calculations predict flow characteristics on the natural point bar environment. We will compare calculations of various hydraulic parameters (velocity, bed shear stress and stream power) by the 2D model and the associated sedimentology of the point bars. As a result of comparison, the usability of the 2D model for flow‐form‐product relationship predictions will be evaluated in natural river bend environment. The study shows that the 2D model can be generally utilized to predict the flood‐generated flow‐form‐product relationship in coarse‐grained and structurally complex point bar environments with sand‐dominated bedload. For example, point bar sections submerged in water depths greater than 50 cm showed a relatively good match laterally between the model and sedimentological estimations. Furthermore, this approach allows us to estimate flood processes on a local scale in similar point bar environments with width–length ratio. The flow direction estimates of the 2D model coincided relatively well with the sedimentological estimations on the bar head. However, flow directions on the downstream section could not be modelled because the 2D model cannot handle the helicoidal flow of the river bend. Copyright © 2010 John Wiley & Sons, Ltd.     

Variations in dissolved CO2 and CH4 in a first‐order stream and catchment: an investigation of soil–stream linkages

Spatial and seasonal variations in CO₂ and CH₄ concentrations in streamwater and adjacent soils were studied at three sites on Brocky Burn, a headwater stream draining a peatland catchment in upland Britain. Concentrations of both gases in the soil atmosphere were significantly higher in peat and riparian soils than in mineral soils. Peat and riparian soil CO₂ concentrations varied seasonally, showing a positive correlation with air and soil temperature. Streamwater CO₂ concentrations at the upper sampling site, which mostly drained deep peats, varied from 2·8 to 9·8 mg l^?1 (2·5 to 11·9 times atmospheric saturation) and decreased markedly downstream. Temperature‐related seasonal variations in peat and riparian soil CO₂ were reflected in the stream at the upper site, where 77% of biweekly variation was explained by an autoregressive model based on: (i) a negative log‐linear relationship with stream flow; (ii) a positive linear relationship with soil CO₂ concentrations in the shallow riparian wells; and (iii) a negative linear relationship with soil CO₂ concentrations in the shallow peat wells, with a significant 2‐week lag term. These relationships changed markedly downstream, with an apparent decrease in the soil–stream linkage and a switch to a positive relationship between stream flow and stream CO₂. Streamwater CH₄ concentrations also declined sharply downstream, but were much lower (<0·01 to 0·12 mg l^?1) than those of CO₂ and showed no seasonal variation, nor any relationship with soil atmospheric CH₄ concentrations. However, stream CH₄ was significantly correlated with stream flow at the upper site, which explained 57% of biweekly variations in dissolved concentrations. We conclude that stream CO₂ can be a useful integrative measure of whole catchment respiration, but only at sites where the soil–stream linkage is strong. Copyright © 2004 John Wiley & Sons, Ltd.     

Ecosystem scale evapotranspiration and net CO2 exchange from a restored peatland

An understanding of the symbiotic water and gas exchange processes at the ecosystem scale is essential to the development of appropriate restoration plans of extracted peatlands. This paper presents ecosystem scale measurements of the atmospheric exchange of water and carbon dioxide (CO₂) from a restored vacuum extracted peatland in eastern Québec, utilizing full‐scale micrometeorological measurements of both evaporation and CO₂. The results indicate that the adopted restoration practices reduce the loss of water from the peat, but CO₂ emissions are ～25% greater than an adjacent nonrestored comparison site. The blockage of drainage ditches and the existence of a mulch cover at the site keep the moisture conditions more or less constant. Consequently, the CO₂ flux, which is predominantly soil respiration, is strongly controlled by peat temperature fluctuations. Copyright © 2001 John Wiley & Sons, Ltd.     

Investigations on distributions and fluxes of sea-air CO_2 of the expedition areas in the Arctic Ocean

揋reenhouse effect?causing global warming has been an important issue of studying climate change. In the latest 100 years, the earth surface temperature has been increased by about 0.4℃—0.8℃[1,2]. And this has been becoming a hotspot of the world[3,4]     

Stream and bed temperature variability in a coastal headwater catchment: influences of surface‐subsurface interactions and partial‐retention forest harvesting

Stream temperature was recorded between 2002 and 2005 at four sites in a coastal headwater catchment in British Columbia, Canada. Shallow groundwater temperatures, along with bed temperature profiles at depths of 1 to 30 cm, were recorded at 10‐min intervals in two hydrologically distinct reaches beginning in 2003 or 2004, depending on the site. The lower reach had smaller discharge contributions via lateral inflow from the hillslopes and fewer areas with upwelling (UW) and/or neutral flow across the stream bed compared to the middle reach. Bed temperatures were greater than those of shallow groundwater during summer, with higher temperatures in areas of downwelling (DW) flow compared to areas of neutral and UW flow. A paired‐catchment analysis revealed that partial‐retention forest harvesting in autumn 2004 resulted in higher daily maximum stream and bed temperatures but smaller changes in daily minima. Changes in daily maximum stream temperature, averaged over July and August of the post‐harvest year, ranged from 1.6 to 3 °C at different locations within the cut block. Post‐harvest changes in bed temperature in the lower reach were smaller than the changes in stream temperature, greater at sites with DW flow, and decreased with depth at both UW and DW sites, dropping to about 1 °C at a depth of 30 cm. In the middle reach, changes in daily maximum bed temperature, averaged over July and August, were generally about 1 °C and did not vary significantly with depth. The pre‐harvest regression models for shallow groundwater were not suitable for applying the paired‐catchment analysis to estimate the effects of harvesting. However, shallow groundwater was warmer at the lower reach following harvesting, despite generally cooler weather compared to the pre‐harvest year. Copyright © 2012 John Wiley & Sons, Ltd.     

A remote sensing model of CO2 flux for wheat and studying of regional distribution

A model for calculating CO₂ flux in the wheat field and an algorithm for estimating CO₂ flux in the mejonal scale were presented using the remote sensing data and supplementary micpo-met~orological data. First of all a-longertenn measurement wae carried out during winter wheat growing period in Yucheng Experimental Station udng the spectmradiometer system, the thermal infrared radiometer system, the Bowen-ratio device as well as the eddy-correlation device. Two kinds of issues concerning remote sensing and CO₂ flux can be obtained. Based on the obeervations a remote sensing model was estabilished. Then when the NOAA-AVHRR passed over the experimental area simultaneous measurements were carried out with the satellites. A regional distribution image for CO₂ flux over wheat canopy in North China (500×500 km²) was made using the supplementary ground data and NOAA-AVHRR remote sensing data which was calibrated by the synchronous observation. The sources and sinks for CO₂ fluxes in the region can be seen obviously. Project supported by the National Natural Science Foundation of China (Grant Nos. 49671058, 49890330)     

Supersaturation and evasion of CO2 and CH4 in surface waters at Mer Bleue peatland,Canada

Carbon dioxide (CO₂) and methane (CH₄) concentrations and evasion rates were measured in surface waters draining Mer Bleue peatland (Ontario, Canada) between spring and autumn 2005. All sites exhibit a consistent pattern of supersaturation throughout the year, which is broadly related to hydrological and temperature changes between spring snowmelt and autumn freezing. Both measurements and estimates of CO₂ and CH₄ evasion from open water to the atmosphere suggest that parts of the catchment (including beaver dams) are significant degassing hot spots. We present data showing how vertical gaseous carbon fluxes compare with lateral carbon fluxes and make an initial estimate of the importance to the overall carbon budget of CO₂ and CH₄ evasion to the atmosphere from water surfaces at Mer Bleue. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of spatial and temporal variability in rainfall and watershed characteristics on stream flow hydrograph

The shape, timing and peak flow of a stream flow hydrograph are significantly influenced by spatial and temporal variability in rainfall and watershed characteristics. Depending upon the size and shape of a watershed, its hydrological response is closely linked with storm dynamics. On an urban watershed a rain storm moving in the direction of flow produces a higher peak than it would if it were moving in the opposite direction. The effect of storm speed on peak discharge is much less for rapidly moving storms than for storms moving at about the same speed as the flow velocity. In a relatively homogeneous watershed the most important effect of spatial variability of rainfall occurs in the timing and shape of the runoff hydrograph. Temporally variable rainfall leads to higher peak flow than does constant rainfall. Significant errors in the prediction of runoff occur when an equivalent uniform hillslope is used to represent a heterogeneous hillslope. When average soil properties are used instead of spatially variable properties, significant differences are observed in infiltration. Spatially variable roughness alters the flow dynamics significantly. © 1997 John Wiley & Sons, Ltd.     

Local‐scale variability of seepage and hydraulic conductivity in a shallow gravel‐bed river

Seepage rate and direction measured with a seepage metre modified for use in flowing water were greatly variable along a 300‐m reach of a shallow, gravel‐bed river and depended primarily on the local‐scale bed topography. The median value of seepage measured at 24 locations was 24 cm/day, but seepage measured at specific sites ranged from ?340 to +237 cm/day. Seepage also varied substantially over periods of hours to days and occasionally reversed direction in response to evolution of the sediment bed. Vertical hydraulic conductivity was related to seepage direction and was larger during upward seepage than during downward seepage; with differences ranging from 4 to 40% in areas of active sediment transport to more than an order of magnitude in areas where current was too slow to mobilize bed sediment. Seepage was poorly related to hydraulic gradient measured over vertical distances of 0·3 m and appeared to be opposite the hydraulic gradient at 18% of the locations where both parameters were measured. Results demonstrate the scale dependence of these measurements in coarse‐grained hyporheic settings and indicate that hydraulic gradients should be determined over a much shorter vertical increment if used to indicate exchange across the sediment–water interface. Published in 2009 by John Wiley & Sons, Ltd.     

Soil erosion in New Zealand is a net sink of CO2

Soil erosion in New Zealand exports much sediment and particulate organic carbon (POC) to the sea. The influence of this carbon export on carbon transfers between soils and the atmosphere has been largely unknown. Erosion models are used to estimate the net carbon transfer between soils and atmosphere due to soil erosion for New Zealand. The models are used to estimate the spatial distribution of erosion, which is combined with a digital map of soil organic carbon content to produce the spatial distribution of carbon erosion. The sequestration of atmospheric CO₂ by regenerating soils is estimated by combining carbon recovery data with the age distribution of soils since erosion occurrence. The North Island of New Zealand is estimated to export 1·9 (with uncertainty of ?0·5 and +1·0) million tonnes of POC per year to the sea and to sequester 1·25 (?0·3 /+0·6) million tonnes of carbon per year from the atmosphere through regenerating soils. The South Island of New Zealand is estimated to export 2·9 (?0·7/+1·5) million tonnes of POC per year and to sequester approximately the same amount. Assuming exported carbon is buried at sea with an efficiency of 80% gives New Zealand a net carbon sink of 3·1 (?2·0/+2·5) million tonnes per year; which is equivalent to 45% of New Zealand's fossil fuel carbon emissions in 1990. The net sink primarily results from a conveyor belt transfer of carbon from the atmosphere to soils regenerating from erosion to the sea floor where carbon is permanently buried. The net sink due to soil erosion can be further increased by reforestation of those terrains where erosion is excessive and there is no carbon recovery in the soils. Copyright © 2010 John Wiley & Sons, Ltd.     

地壳流体CO_2的释放与地震关系:回顾与展望

介绍了地壳流体CO2的3个主要成因:有机成因、变质成因及幔源成因,并着重讨论了CO2气体的稳定同位素13C的示踪性能;总结了由地壳释放CO2的主要方式、上升通道及其存在形态。在回顾地壳流体CO2等释放在目前地震监测、预报及相关研究中的主要研究进展的同时,指出地壳深部流体(CO2、He、CH4等)在同位素地球化学、深源流体运移与地震活动、深源流体对震源介质的影响等。此外,提出对深源流体监测不能仅限单一组分(CO2)的监测,需多种深源成分(He、Ne、Ar、H2、CH4)同时监测。