Thallium Mass Fraction and Stable Isotope Ratios of Sixteen Geological Reference Materials

Thallium stable isotope ratio and mass fraction measurements were performed on sixteen geological reference materials spanning three orders of magnitude in thallium mass fraction, including both whole rock and partially separated mineral powders. For stable isotope ratio measurements, a minimum of three independent digestions of each reference material was obtained. High‐precision trace element measurements (including Tl) were also performed for the majority of these RMs. The range of Tl mass fractions represented is 10 ng g^?1 to 16 μg g^?1, and Tl stable isotope ratios (reported for historical reasons as ε²⁰⁵Tl relative to NIST SRM 997) span the range ?4 to +2. With the exception – attributed to between‐bottle heterogeneity – of G‐2, the majority of data are in good agreement with published or certified values, where available. The precision of mean of independent measurement results between independent dissolutions suggests that, for the majority of materials analysed, a minimum digested mass of 100 mg is recommended to mitigate the impact of small‐scale powder heterogeneity. Of the sixteen materials analysed, we therefore recommend for use as Tl reference materials the USGS materials BCR‐2, COQ‐1, GSP‐2 and STM‐1; CRPG materials AL‐I, AN‐G, FK‐N, ISH‐G, MDO‐G, Mica‐Fe, Mica‐Mg and UB‐N; NIST SRM 607 and OREAS14P.     

渤海东海海洋沉积物中碳氮稳定同位素标准物质研制

海洋沉积物中碳氮稳定同位素因其能够确定有机质的来源,有助于了解碳循环、气候变化、有机质迁移转化而备受关注,但其分析测试过程中尚缺乏海洋沉积物碳氮稳定同位素标准物质进行质量监控。本文依据ISO导则35和国家《一级标准物质技术规范》(JJG1006—1994),研制了三个海洋沉积物碳氮稳定同位素标准物质(MSCNI-1、MSCNI-2和MSCNI-3),候选物样品分别采自我国渤海锦州湾湿地、东海闽浙近岸和东海冲绳海槽,定值组分为总碳氮同位素(δ~(13)C-TC、δ~(15)N-TN)和有机碳氮同位素(δ~(13)C-C~(org)、δ~(15)N-N~(org)),定值方法采用元素分析-同位素比值质谱法(EA-IRMS)多家实验室协同定值。经检验,三个标准物质候选物均匀性良好,一年内定值组分均无显著变化,具有良好的稳定性;δ~(13)C和δ~(15)N的标准不确定度分别小于0.15%和0.24%,标准值和标准不确定度合理。该套标准物质是我国以海底沉积物为介质的基体型碳氮稳定同位素标准物质,定值方法准确可靠,可供海洋、地质及环境等相关领域实验室用于仪器校准、方法评价和质量监控等。     

Rubidium Isotope Ratios of International Geological Reference Materials

In this study we determined rubidium isotope ratios in twenty-one commonly used international geological reference materials, including igneous, sedimentary and metamorphic rocks, as well as an IAPSO seawater reference material. All δ⁸⁷Rb results were obtained relative to the NIST SRM 984 reference material. For most reference materials, Rb was purified using a single column loaded with Sr-spec resin. For reference materials containing low Rb but high mass fractions of matrix elements (such as basic rock and seawater), Rb was purified using two-column chromatography, with the first column packed with AGMP-50 resin and the second column packed with Sr-spec resin. Two methods for instrumental mass bias correction, sample-standard bracketing (SSB) mode, and the combined sample-standard bracketing and Zr internal normalisation (C-SSBIN) method, were compared for Rb isotopic measurements by multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). The long-term reproducibility of Rb isotopic measurements using both methods was similar, better than 0.06‰ (2s, standard deviation) for NIST SRM 984. Significant Rb isotopic fractionation was observed among the reference materials, with an overall variation in δ⁸⁷Rb values of approximately 0.5‰. The δ⁸⁷Rb values of igneous rocks ranged from -0.28‰ to +0.06‰, showing a trend from heavier isotopic compositions in mafic rocks to lighter δ⁸⁷Rb values in the more evolved felsic rocks. The sedimentary and metamorphic rocks had Rb isotope ratios similar to those of igneous rocks. The δ⁸⁷Rb values of the reference materials related to low-temperature geological processes showed a wider range than those of high-temperature processes. Notably, the IAPSO seawater reference material had a δ⁸⁷Rb value of +0.14‰, which deviated from that of igneous rocks, and represents the heaviest reservoir of Rb isotopes found thus far on Earth. The comprehensive dataset presented here has the potential to serve for quality assurance purposes, and provide a framework for interlaboratory comparisons of Rb isotope ratios.     

Sulfur Mass Fractions in Thirty-Seven Geological Reference Materials by Titration,XRF and Elemental Analyser

Although sulfur is a relatively abundant element, measurement results with small uncertainties remain challenging to achieve, especially at S mass fractions below 100 μg g^-1. We report > 1700 measurement results of S for thirty-seven geological reference materials including igneous, metamorphic and sedimentary rocks, and one soil. Measurement results were obtained in two laboratories (Macquarie GeoAnalytical and Géosciences Montpellier) over a long period of time ≈ 25 years (1997–2022), using several measurement procedures: X-ray fluorescence, high temperature iodo titration and elemental analysers equipped with thermal conductivity and/or infra-red detectors. Sulfur mass fractions for these diverse geological reference materials range between 5.5 and 11,395 μg g^-1. While the comprehensive data set reported here should contribute significantly to a better characterisation of the S mass fractions of widely used geological reference materials, computed uncertainties, data distribution and comparison to published values still indicate heterogeneous distribution of S carrier(s) and analytical bias.     

Simultaneous Determination of Total Carbon, Nitrogen, Hydrogen and Sulfur in Twenty-seven Geological Reference Materials by Elemental Analyser

The contents of total carbon, hydrogen, nitrogen and sulfur in twenty-seven geological reference materials, issued by five producer organisations (USGS, CCRMP, ANRT, NIST and GSJ) were determined using an automated simultaneous elemental analyser following combustion. In order to complete gasification of C and N in some geological materials, the combustion temperature needed to be greater than 1150 °C. The calibrator prepared from known amounts of reagent material was not adopted for more than 1.2% m/m of H. Unrealistically high values in certain materials supposed to contain less than 1000 μg g⁻¹ S may be due mainly to memory effects. The limit of detection was 50 μg g⁻¹ for C and N, 500 μg g⁻¹ for H and 1000 μg g⁻¹ for S. Although the blank value of C and N was always stable and less than one third of the detection limit, it had a slightly higher value for N and S. By repeating long-term analysis, high reproducibility for each of the four elements was verified. The method has been applied satisfactorily to a variety of geological reference materials, and recommended values for C, H and N for most of the reference materials studied have been tabulated.     

稳定同位素测试技术与参考物质研究现状及发展趋势

同位素测试技术是同位素研究的基础。新的测试技术创立,新的测试仪器的研制,原有仪器设备和测试方法的改进是稳定同位素地球化学研究发展的依托。因此发展同位素测试技术始终是同位素地球化学研究的一个主要方面。文章介绍了同位测试仪器设备,稳定同位素研究对象和测试方法,同位素参考物质的研制以及同位素绝对比值测量的研究现状及近年来的发展。概括起来,总的趋势是：快速化,精确化,微量化,微区化,多样化和标准化。     

The Role of Isotopic Reference Materials for the Analysis of "Non-Traditional" Stable Isotopes

The advent of multiple collector-inductively coupled plasma-mass spectrometry has provided an impetus to the study of isotope abundance variations in natural materials. In particular, the study of "non-traditional" stable isotopes has revealed isotope fractionation variations caused by a range of physiochemical and biological mechanisms. The magnitude of these variations may be < 1 per mil per mass unit, but are significant in terms of the experimental uncertainties involved, provided rigorous mass spectrometric protocols are followed. The double spike technique can be used effectively to evaluate isotope fractionation effects for both multiple collector-inductively coupled plasma-mass spectrometry and thermal ionisation mass spectrometry. The demanding nature of this research implies the need for internationally-accepted reference materials so that interlaboratory comparisons can be made with confidence. At present, isotopically certified reference materials are unavailable for many elements, including Cu, Zn, Mo and Cd, and it is important that this situation be rectified as soon as practicable. Until such time as isotopically certified reference materials become available for every element, stable isotope geochemists should adopt a common reference material as the standard for each element so that rigorous interlaboratory comparisons can be made.     

有机化学物质碳氮稳定同位素系列标准物质研制

实验室和研究人员所使用的碳、氮同位素标准物质一般由国际原子能机构(IAEA)获得,然而近年来,随着碳氮同位素在实验室质量监控、方法评价、仪器校准等方面的广泛应用,市场需求量不断增加, IAEA研制的碳、氮同位素标准物质的种类与数量逐渐不能满足科学研究快速发展的需求。我国急需研制适应当今分析技术水平的有机质碳氮同位素国家标准物质用以进行质量监控、方法评价、仪器校准。为保证量值传递精度,本文研制了4个有机化学物质的碳氮稳定同位素标准物质,其中3个为尿素样品,1个为L-谷氨酸。经检验4种标准物质的均匀性通过F值检验,标准物质的δ~(13)C和δ~(15)N值经过一年的稳定性检验,特征量值变化在测量方法允许的不确定度范围内,由此判定δ~(13)C和δ~(15)N值稳定性良好。由包括研制单位实验室在内的12家实验室协同定值,采用高温燃烧-气体同位素质谱法测定了δ~(13)C和δ~(15)N值,系列标准物质δ~(13)C和δ~(15)N认定值区间呈梯度分布,δ~(13)C值为-40‰～0‰,δ~(15)N值为-10‰～30‰,涵盖了我国天然样品中有机质碳氮稳定同位素组成范围;研制的系列标准物质δ~(13)C的定值扩展不确定度不大于0.08‰,δ~(15)N的定值扩展不确定度不大于0.09‰,定值水平与国际标准物质相当。该系列标准物质已被国家质检总局批准为国家一级标准物质,批准号为GBW04494～GBW04497。可被用于地质、生态、环境等多种样品δ~(13)C和δ~(15)N比值测定时的分析监控、仪器校准、方法评价、质量保证和质量监控。     

地质调查通用标准物质及标准方法信息系统

根据各地质实验室的特点和质量管理规范需求，结合实验室认可及检测实验室能力的需要，建立了地质调查通用标准物质和标准方法信息系统。该系统不仅能提供地质调查通用标准物质、标准方法的基本信息，还增加了与能力分析相关的检测参数信息，并实现了标准信息网上查询和维护管理。该系统适用于地质调查实验室的质量管理系统。     

元素分析-同位素比值质谱法测量海洋沉积物中有机碳和氮稳定同位素组成的实验室间比对研究

海洋沉积物中有机碳、氮稳定同位素(δ~(13)C、δ~(15)N)作为一种有效指标,可对不同地质时期空气、温度、降水等参数的变化进行标记。元素分析-同位素比值质谱法是一种测量海洋沉积物有机碳、氮稳定同位素组成的合理、有效的方法。目前我国有诸多实验室使用元素分析仪(EA)与稳定同位素比值质谱仪(IRMS)联用的方法对沉积物中的有机碳、氮稳定同位素进行测试。各实验室之间测试技术及数据稳定性缺少比对依据,测试结果缺乏有效的溯源,使用过程中缺乏规范和统一。本文选取了我国2018年研制的三个国家一级海洋沉积物碳氮稳定同位素标准物质(GBW04701、GBW04702、GBW04703)及两个国际标准物质(EMA-B2152、EMA-B2151),在我国十家实验室对EA-IRMS在线技术测试方法进行实验室间的测量比对实验,以验证方法的稳定性、精密度和准确度。测试结果表明:各家协作实验室的数据准确、稳定,方法的重复性和再现性良好,测得的δ~(13)C和δ~(15)N精密度分别好于0.10‰、0.14‰。通过比对研究,同时证明了EA-IRMS在线技术适用于海洋沉积物中的有机碳、氮稳定同位素的测定,初步建立了一套适合海洋沉积物样品分析的方法。     

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.     

Atmospheric Reactive Nitrogen Cycle and Stable Nitrogen Isotope Processes: Progresses and Perspectives

Oxidized reactive nitrogen in the atmosphere mainly consists of nitrogen oxides (NO _X =NO+NO₂, NO₃) and nitric acid. The atmospheric cycling of NO _X influences the formation of ozone and hydroxyl radicals that are important for atmospheric oxidation capacity. Nitric acid, the final product of NO _X oxidation, not only is an important component of particulate pollutants, but also has a direct impact on the ecosystem through dry and wet deposition. The stable nitrogen isotope (δ¹⁵N) shows the potential to study reactive nitrogen cycle, and to trace the emission, transport and deposition of reactive nitrogen from local to global scales. Here, we reviewed previous studies using δ¹⁵N to investigate NO _X emission and atmospheric reactive nitrogen cycle, and discuss the uncertainties of δ¹⁵N signatures of different NO _X sources from two aspects: NO _X generation mechanism and NO _X collection methods. We also discussed the nitrogen isotope fractionation and the consequences during the conversions of NO _y molecules. We ended up with discussions on the possibility of using δ¹⁵N to trace NO _X emissions. Although there are still large uncertainties in quantifying and tracing NO _X emissions using nitrogen stable isotopes, such isotope tool is efficient enough to trace reactive nitrogen cycles in the atmosphere. On the basis of this, we proposed that we can combine atmospheric chemistry transmission models with isotope tracers to improve our understanding of regional and global atmospheric reactive nitrogen cycle regarding the fluxes of different emission sources, their atmospheric transformation, etc.     

Basaltic and Solution Reference Materials for Iron,Copper and Zinc Isotope Measurements

Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ⁵⁶Fe = 0.83 ± 0.07 and δ⁵⁷Fe = 1.20 ± 0.13, δ⁶⁵Cu = 0.57 ± 0.06, and δ⁶⁶Zn = ?0.79 ± 0.12 and δ⁶⁸Zn = ?1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ⁵⁶Fe = 0.15 ± 0.07, δ⁵⁷Fe = 0.22 ± 0.10, δ⁶⁵Cu = 0.12 ± 0.08, δ⁶⁶Zn = 0.17 ± 0.13, and δ⁶⁸Zn = 0.34 ± 0.26 (2s).     

Problems and Suggestions Concerning the Notation of Cadmium Stable Isotope Compositions and the Use of Reference Materials

Notations for Cd stable isotope compositions and the use of reference materials are discussed. It is proposed that Cd stable isotope data should be reported as variations of the ¹¹⁴Cd/¹¹⁰Cd ratio/ using either the δ^114/110Cd or ε^114/110Cd notations. Future publications should report results for BAM-1012 Cd, the only currently available international Cd isotope reference material. It is also recommended that "Münster Cd" and a range of specified geological reference materials are used as additional reference materials. The final choice of a primary "zero-delta" reference standard remains the most important outstanding question.     

Tourmaline Reference Materials for the In Situ Analysis of Oxygen and Lithium Isotope Ratio Compositions

Three tourmaline reference materials sourced from the Harvard Mineralogical and Geological Museum (schorl 112566, dravite 108796 and elbaite 98144), which are already widely used for the calibration of in situ boron isotope measurements, are characterised here for their oxygen and lithium isotope compositions. Homogeneity tests by secondary ion mass spectrometry (SIMS) showed that at sub‐nanogram test portion masses, their ¹⁸O/¹⁶O and ⁷Li/⁶Li isotope ratios are constant within ± 0.27‰ and ± 2.2‰ (1s), respectively. The lithium mass fractions of the three materials vary over three orders of magnitude. SIMS homogeneity tests showed variations in ⁷Li/²⁸Si between 8% and 14% (1s), which provides a measure of the heterogeneity of the Li contents in these three materials. Here, we provide recommended values for δ¹⁸O, Δ’¹⁷O and δ⁷Li for the three Harvard tourmaline reference materials based on results from bulk mineral analyses from multiple, independent laboratories using laser‐ and stepwise fluorination gas mass spectrometry (for O), and solution multi‐collector inductively coupled plasma‐mass spectroscopy (for Li). These bulk data also allow us to assess the degree of inter‐laboratory bias that might be present in such data sets. This work also re‐evaluates the major element chemical composition of the materials by electron probe microanalysis and investigates these presence of a chemical matrix effect on SIMS instrumental mass fractionation with regard to δ¹⁸O determinations, which was found to be < 1.6‰ between these three materials. The final table presented here provides a summary of the isotope ratio values that we have determined for these three materials. Depending on their starting mass, either 128 or 512 splits have been produced of each material, assuring their availability for many years into the future.     

Chemical Separation and Isotopic Variations of Cu and Zn From Five Geological Reference Materials

This paper presents an adapted anion exchange column chemistry protocol which allowed separation of high-purity fractions of Cu and Zn from geological materials. Isobaric and non-spectral interferences were virtually eliminated for consequent multiple-collector ICP-MS analysis of the isotopic composition of these metals. The procedure achieved ∼ 100% recoveries, thus ensuring the absence of column-induced isotopic fractionation. By employing these techniques, we report isotopic analyses for Cu and Zn from five geological reference materials: BCR-027 blende ore (BCR), δ⁶⁵Cu = 0.52 ± 0.15‰ (n = 10) and δ⁶⁶Zn = 0.33 ± 0.07‰ (n = 8); BCR-030 calcined calamine ore (BCR), δ⁶⁶Zn = -0.06 ± 0.09‰ (n = 8); BCR-1 basalt (USGS), δ⁶⁶Zn = 0.29 ± 0.12‰ (n = 8); NOD-P-1 manganese nodule (USGS), δ⁶⁵Cu = 0.46 ± 0.08‰ (n = 10) and δ⁶⁶Zn = 0.78 ± 0.09‰ (n = 9); SU-1 Cu-Co ore (CCRMP), δ⁶⁵Cu = -0.018 ± 0.08‰ (n = 10) and δ⁶⁶Zn = 0.13 ± 0.17‰ (n = 6). All uncertainties are ± 2s; copper isotope ratios are reported relative to NIST SRM-976, and zinc isotope ratios relative to the Lyon-group Johnson Matthey metal (batch 3-0749 L) solution, JMC Zn. These values agree well with the limited data previously published, and with results reported for similar natural sample types. Samples were measured using a GVi IsoProbe MC-ICP-MS, based at the Natural History Museum, London. Long-term measurement reproducibility has been assessed by repeat analyses of both single element and complex matrix samples, and was commonly better than ± 0.07‰ for both δ⁶⁶Zn and δ⁶⁵Cu.     

Molybdenum Mass Fractions and Stable Isotope Compositions of Sedimentary Carbonate and Silicate Reference Materials

A double‐spike method in combination with MC‐ICP‐MS was applied to obtain molybdenum (Mo) mass fractions and stable isotope compositions in a suite of sedimentary silicate (marine, lake, stream, estuarine, organic‐rich sediment, shales, slate, chert) and carbonate reference materials (coral, dolomite, limestones, carbonatites), and a manganese nodule reference material, poorly characterised for stable Mo isotope compositions. The Mo contents vary between 0.076 and 364 μg g^?1, with low‐Mo mass fractions (< 0.29 μg g^?1) found almost exclusively in carbonates. Intermediate Mo contents (0.73–2.70 μg g^?1) are reported for silicate sediments, with the exception of chert JCh‐1 (0.24 μg g^?1), organic‐rich shale SGR‐1b (36.6 μg g^?1) and manganese nodule NOD‐A‐1 (364 μg g^?1). The Mo isotope compositions (reported as δ⁹⁸Mo relative to NIST SRM 3134) range from ?1.77 to 1.03‰, with the intermediate precision varying between ± 0.01 and ± 0.12‰ (2s) for most materials. Low‐temperature carbonates show δ⁹⁸Mo values ranging from 0.21 to 1.03‰ whereas δ⁹⁸Mo values of ?1.77 and ?0.17‰ were obtained for carbonatites CMP‐1 and COQ‐1, respectively. Silicate materials have δ⁹⁸Mo values varying from ?1.56 to 0.73‰. The range of δ⁹⁸Mo values in reference materials may thus reflect the increasingly important relevance of Mo isotope investigations in the fields of palaeoceanography, weathering, sedimentation and provenance, as well as the magmatic realm.     

Three Secondary Reference Materials for Lithium Isotope Measurements: Li7-N, Li6-N and LiCl-N Solutions

The CRPG (Nancy, France) has prepared secondary reference materials for Li isotope measurements by mixing ⁷Li or ⁶Li spikes and either L-SVEC or IRMM-016 certified reference materials to produce solutions having a known Li concentration and isotopic composition. The Li7-N and Li6-N solution samples (1.5 mol l⁻¹ HNO₃) have nominal δ⁷Li isotopic compositions of 30.1‰ and -9.7‰ respectively relative to L-SVEC and concentrations of 100 mg l⁻¹. Repeated measurement of these samples using the QUAD-ICP-MS at the CRPG yielded δ⁷Li of 30.4 ± 1.1‰ (n = 13) and -8.9 ± 0.9‰ (n = 9) at the 2s level of confidence. An additional LiCl-N solution was measured and yielded a delta value of 9.5 ± 0.6‰ (n = 3). Identical results were obtained at the BRGM (Orléans, France) from determinations performed with a Neptune MC-ICP-MS (30.2 ± 0.3‰, n = 89 for the Li7-N, -8.0 ± 0.3‰, n = 38 for the Li6-N and 10.1 ± 0.2‰, n = 46 for LiCl-N at the 2s level of confidence). The deviation of measured composition relative to the nominal value for the Li6-N solution might be explained by either contamination during preparation or an error during sample weighing. These secondary reference materials, previously passed through ion exchange resin or directly analysed, may be used for checking the accuracy of Li isotopic measurements over a range of almost 40‰ and will be available to the scientific community upon request to J. Carignan or N. Vigier, CRPG.     

Multi-Element Isotope Dilution Sector Field ICP-MS: A Precise Technique for the Analysis of Geological Materials and its Application to Geological Reference Materials

We present a multi-element technique for the simultaneous determination of twelve trace elements in geological materials by combined isotope dilution (ID) sector field inductively coupled plasma-mass spectrometry (SF-ICP-MS) following simple sample digestion. In addition, the concentrations of fourteen other trace elements have been obtained using the ID determined elements as internal standards. This method combines the advantages of ID (high precision and accuracy) with those of SF-ICP-MS (multi-element capability, fast sample processing without element separation) and overcomes the most prevailing drawbacks of ICP-MS (matrix effects and drift in sensitivity). Trace element concentration data for BHVO-1 (n = 5) reproduced to within 1–3% RSD with an accuracy of 1–2% relative to respective literature values for ID values and 2–3% for all other values. We have applied this technique to the analysis of seventeen geological reference materials from the USGS, GSJ and IAG. The sample set also included the new USGS reference glasses BCR-2G, BHVO-2G and BIR-1G, as well as the MPI-DING reference glasses KL2-G and ML3B-G, and NIST SRM 612. Most data agreed within 3–4% with respective literature data. The concentration data for the USGS reference glasses agreed in most cases with respective data of the original rock powder within the combined standard uncertainty of the method (2–3%), except the U concentration of BIR-1G, which showed a three times higher concentration compared to BIR-1.     

High‐Precision Measurement of Stable Cr Isotopes in Geological Reference Materials by a Double‐Spike TIMS Method

Chromium (Cr) isotopes have been widely used in various fields of Earth and planetary sciences. However, high‐precision measurements of Cr stable isotope ratios are still challenged by difficulties in purifying Cr and organic matter interference from resin using double‐spike thermal ionisation mass spectrometry. In this study, an improved and easily operated two‐column chemical separation procedure using AG50W‐X12 (200–400 mesh) resin is introduced. This resin has a higher cross‐linking density than AG50W‐X8, and this higher density generates better separation efficiency and higher saturation. Organic matter from the resin is a common cause of inhibition of the emission of Cr during analysis by TIMS. Here, perchloric and nitric acids were utilised to eliminate organic matter interference. The Cr isotope ratios of samples with lower Cr contents could be measured precisely by TIMS. The long‐term intermediate measurement precision of δ^53/52Cr_{NIST SRM 979} for BHVO‐2 is better than ± 0.031‰ (2s) over one year. Replicated digestions and measurements of geological reference materials (OKUM, MUH‐1, JP‐1, BHVO‐1, BHVO‐2, AGV‐2 and GSP‐2) yield δ^53/52Cr_{NIST SRM 979} results ranging from ?0.129‰ to ?0.032‰. The Cr isotope ratios of geological reference materials are consistent with the δ^53/52Cr_{NIST SRM 979} values reported by previous studies, and the measurement uncertainty (± 0.031‰, 2s) is significantly improved.