Modelling white mica pressure‐temperature‐time (P‐T‐t) paths using thermobarometric and 40Ar/39Ar thermochronologic data

White micas are major rock forming minerals in igneous and metamorphic rocks, and their chemical and isotopic variations can be used to determine pressure, temperature and time (P‐T‐t) histories. We apply ⁴⁰Ar/³⁹Ar multi‐diffusion domain modelling to white micas from blueschists blocks in serpentinite matrix mélange from the exhumed Baja California subduction complex. Thermal history models yielded T‐t paths suggesting that ⁴⁰Ar* resides within multiple diffusion domains with varying ⁴⁰Ar* retentivity. Modelled white mica thermal histories and thermobarometric data were used to forward model continuous P‐T‐t paths. P‐T‐t paths are consistent with previous studies and are interpreted to constrain blueschist block exhumation paths within the Baja accretionary wedge. Our P‐T‐t models use temperature controlled ⁴⁰Ar/³⁹Ar step heat data in which argon loss by volume diffusion can be demonstrated, and for which the white mica petrogenesis is known.     

Closed system behaviour of argon in osumilite records protracted high‐T metamorphism within the Rogaland–Vest Agder Sector,Norway

Here, we present results of the first ⁴⁰Ar/³⁹Ar dating of osumilite, a high‐T mineral that occurs in some volcanic and high‐grade metamorphic rocks. The metamorphic osumilite studied here is from a metapelitic rock within the Rogaland–Vest Agder Sector, Norway, an area that experienced regional granulite facies metamorphism and subsequent contact metamorphism between 1,100 Ma and 850 Ma. The large grain size (~1 cm) of osumilite in the studied rock, which preserves a nominally anhydrous assemblage, increases the potential for large portions of individual grains to have remained essentially unaffected by the effects of diffusive argon loss, potentially preserving prograde ages. Step‐heating diffusion experiments yielded a maximum activation energy of ~461 kJ/mol and a pre‐exponential factor of ~8.34 × 10⁸ cm²/s for Ar diffusion in osumilite. These parameters correspond to a relatively high closure temperature of ~620°C for a cooling rate of 10°C/Ma in an osumilite crystal with a 175 µm radius. Fragments of osumilite separated from the sample preserve a range of ages between c. 1,070 and 860 Ma. The oldest ages are inferred to date the growth of coarse‐grained osumilite during prograde granulite facies regional metamorphism, which pre‐date contact metamorphism that has historically been ascribed to the growth of osumilite in the region. The majority of fragments record ages between c. 920 and 860 Ma, inferred to reflect the growth of osumilite and/or diffusive argon loss during contact metamorphism. The retention of old ⁴⁰Ar/³⁹Ar dates was facilitated by the low diffusivity of Ar in osumilite (i.e. a closed system), large grain sizes, and anhydrous metamorphic conditions. The ability to date osumilite with the ⁴⁰Ar/³⁹Ar method provides a valuable new thermochronometer that may constrain the timing and duration of high‐T magmatic and metamorphic events.     

MK‐1 Apatite: A New Potential Reference Material for (U‐Th)/He Dating

The (U‐Th)/He dating technique has been widely used for several decades to constrain the timing of low temperature geological processes. Recent research has shown that the commonly used reference material (the Durango apatite) often yields dispersed fragment dates that are beyond analytical uncertainties. Here, we report a new apatite (U‐Th)/He dating reference material, MK‐1, which was collected from the Mogok metamorphic belt in Burma. Electron probe microanalysis and backscattered electron images of two randomly selected fragments indicate that this apatite is chemically and structurally homogeneous. We performed single‐grain (U‐Th)/He dating on thirty randomly selected fragments of this material. (U‐Th)/He dating results from multiple laboratories show that fragments of the MK‐1 apatite megacryst yielded reproducible results, with a mean date of 18.0 ± 0.2 Ma. The Th/U ratio of this apatite is homogeneous. Nine randomly selected fragments registered a narrow range of effective uranium (eU) mass fractions (326–354 μg g^?1), with a mean value of 336.6 ± 10.3 μg g^?1. Twenty‐four in situ (U‐Th)/He dates yielded a mean value of 18.0 ± 0.2 Ma (MSWD = 0.41), indistinguishable from the results obtained by the conventional method. All the results suggest that this apatite has the potential to become a new reference material for (U‐Th)/He geochronology.     

Direct 40Ar/39Ar K‐feldspar dating of Late Permian—Early Triassic brittle faulting in northern Norway

While the offshore post‐Caledonian extensional history of the north Norwegian passive margin is well constrained, the tectonic relationship between onshore and offshore regions is less clear because of limited age constraints on the timing of rifting onshore. ⁴⁰Ar/³⁹Ar dating of K‐feldspar from hydrothermally altered fault rocks in a Precambrian gneiss complex in northern Norway was used to study the timing of extensional faulting onshore. In addition, ⁴⁰Ar/³⁹Ar dating of K‐feldspar from the host rock provided insight into the regional rock cooling history prior to brittle deformation. Results indicated a dominant Late Permian–Early Triassic (~265–244 Ma) faulting event and found no evidence for later reactivation, which has been documented offshore. The region cooled to below the closure temperature for ⁴⁰Ar/³⁹Ar K‐feldspar in the Carboniferous to Early Permian, prior to the main brittle faulting event. ⁴⁰Ar/³⁹Ar dating of fault zone K‐feldspar products provided a means to date brittle faulting events.     

KArMars: A Breadboard Model for In Situ Absolute Geochronology Based on the K–Ar Method Using UV‐Laser‐Induced Breakdown Spectroscopy and Quadrupole Mass Spectrometry

We present a breadboard prototype to perform in situ dating applicable to planetary exploration. Based on the K–Ar dating method and using instruments inspired by flight‐proven analytical components, ‘KArMars’ ablated a geological sample under high vacuum with a quadrupled ultraviolet (UV at 266 nm) Nd:YAG laser. During ablation, the K content of the target material was given by laser‐induced breakdown spectroscopy and the released ⁴⁰Ar was measured with a quadrupole mass spectrometer. Because K was measured as a concentration and ⁴⁰Ar as a count of atoms, these values were converted using the ablated mass given by the product of the density and the ablated volume. The uncertainties of the age measurement were < 15%. The quality of the K–Ar measurements was enhanced by the advantages of UV laser ablation such as the minimisation of thermal effects on argon diffusion. This work demonstrates that a specialised instrument inspired by this set‐up could provide in situ absolute geochronology with sufficient precision for scientific investigations, particularly where the crater density counting provides higher uncertainties on Mars.     

Instrumentation Development for In Situ 40Ar/39Ar Planetary Geochronology

The chronology of the Solar System, particularly the timing of formation of extra‐terrestrial bodies and their features, is an outstanding problem in planetary science. Although various chronological methods for in situ geochronology have been proposed (e.g., Rb‐Sr, K‐Ar), and even applied (K‐Ar), the reliability, accuracy, and applicability of the ⁴⁰Ar/³⁹Ar method makes it by far the most desirable chronometer for dating extra‐terrestrial bodies. The method however relies on the neutron irradiation of samples, and thus a neutron source. Herein, we discuss the challenges and feasibility of deploying a passive neutron source to planetary surfaces for the in situ application of the ⁴⁰Ar/³⁹Ar chronometer. Requirements in generating and shielding neutrons, as well as analysing samples are described, along with an exploration of limitations such as mass, power and cost. Two potential solutions for the in situ extra‐terrestrial deployment of the ⁴⁰Ar/³⁹Ar method are presented. Although this represents a challenging task, developing the technology to apply the ⁴⁰Ar/³⁹Ar method on planetary surfaces would represent a major advance towards constraining the timescale of solar system formation and evolution.     

Geochemistry,Zircon U–Pb Analysis,and Biotite 40Ar/39Ar Geochronology of the Maoling Gold Deposit,Liaodong Rift,NE China

The Maoling gold deposit is located in the southwestern part of the Liaodong rift, NE China, and has estimated reserves of 25 t. In this paper we present the results of an investigation into the geochronology and geodynamic mechanisms of igneous activity and metallogenesis within the Maoling gold deposit. New zircon U–Pb age data, biotite ⁴⁰Ar/³⁹Ar age data, whole‐rock geochemistry, and Hf isotopic analyses are presented in order to constrain the petrogenesis and mineralization of the deposit. Zircon U–Pb dating of the Wolongquan biotite monzogranite and Maoling biotite granite yielded mean ages of 194.0 ± 1.1 Ma and 196.1 ± 1.1 Ma, respectively. All the granites are characteristically high‐K calc‐alkaline, enriched in light rare earth elements and large ion lithophile elements, and depleted in high field strength elements, which is consistent with the geochemical characteristics of arc‐type magmas. The Hf isotope characteristics indicate that the granites formed by partial melting of early Paleoproterozoic crustal material. In addition, biotite ⁴⁰Ar/³⁹Ar dating indicates that the Maoling gold deposit formed at 188.9 ± 1.2 Ma, implying that the mineralization was related to both the granite intrusions. Taking into account previous data on S–Pb–O–H isotopes and our new age data, the Maoling deposit can be classified as an intrusion‐related gold deposit. Taking into account the geology of the study area and adjacent regions, we propose that the Maoling gold deposit and its associated granitic intrusions formed in a geodynamic setting that was dominated by subduction of the Paleo‐Pacific Plate beneath the Eurasian continent.     

P–T–t estimation of deformation in low‐grade quartz‐feldspar‐bearing rocks using thermodynamic modelling and 40Ar/39Ar dating techniques: example of the Plan‐de‐Phasy shear zone unit (Briançonnais Zone,Western Alps)

Pressure–Temperature–time (P–T–t) estimates of the syn‐kinematic strain at the peak‐pressure conditions reached during shallow underthrusting of the Briançonnais Zone in the Alpine subduction zone was made by thermodynamic modelling and ⁴⁰Ar/³⁹Ar dating in the Plan‐de‐Phasy unit (SE of the Pelvoux Massif, Western Alps). The dated phengite minerals crystallized syn‐kinematically in a shear zone indicating top‐to‐the‐N motion. By combining X‐ray mapping with multi‐equilibrium calculations, we estimate the phengite crystallization conditions at 270 ± 50 °C and 8.1 ± 2 kbar at an age of 45.9 ± 1.1 Ma. Combining this P–T–t estimate with data from the literature allows us to constrain the timing and geometry of Alpine continental subduction. We propose that the Briançonnais units were scalped on top of the slab during ongoing continental subduction and exhumed continuously until collision.     

Direct 40Ar/39Ar dating of Late Ordovician and Silurian brittle faulting in the southwestern Norwegian Caledonides

Structural data as well as U–Pb zircon and ⁴⁰Ar/³⁹Ar biotite and muscovite ages were collected from the Rolvsnes granodiorite in western Norway. The granodiorite intruded at c. 466 Ma, cooled quickly and escaped later viscous deformation. Brittle top‐to‐the‐NNW thrust faults (Set I) and WNW–ESE striking dextral strike‐slip faults (Set II) formed in a NNW–SSE transpressional regime. ⁴⁰Ar/³⁹Ar dating of synkinematic mica from both sets reveals a c. 450 Ma (Late Ordovician) age of faulting, which constrains early‐Caledonian brittle deformation. Set I and II faults are overprinted by a set of lower‐grade, variably oriented chlorite‐ and epidote‐coated faults (Set III) constraining WNW–ESE shortening. A lamprophyric dyke oriented compatibly with this stress field intruded at c. 435 Ma (Silurian), indicating that Set III formed at the onset of the Scandian Baltica–Laurentia collision. The preservation of Caledonian brittle structures indicates that the Rolvsnes granodiorite occupied a high tectonic level throughout the Caledonian orogeny.     

Dating palaeo‐seismic faulting in the Taiwan Mountain Belt

In‐situ ⁴⁰Ar/³⁹Ar laser microprobe dating was carried out on the Hoping pseudotachylite from a mylonite‐fault zone in the metamorphosed basement complex of the active Taiwan Mountain Belt to determine the timing of the responsible earthquake(s). The dating results, distributed from 3.2 to 1.6 Ma with errors ranging from 0.2 to 1.1 Ma, were derived from a combination of two Ar isotopic system end‐members with inverse isochron ages of 1.55 ± 0.05 and 2.87 ± 0.07 Ma, respectively. Petrographical observations reveal fault melt containing ultracataclasites, therefore the older inverse isochron end‐member may be attributed to the relic wall rock Ar isotopic system contained in micro‐breccia. Without significant Ar loss expected, the ~1.6 Ma for the young end‐member defines the exact time of the pseudotachylite formation. Seismic faulting therefore occurred during basement rock exhumation in the Taiwanese hinterland.     

40Ar/39Ar and K–Ar age constraints on the timing of regional deformation,south coast of New South Wales,Lachlan Fold Belt: Problems and implications

Four slate samples from subduction complex rocks exposed on the south coast of New South Wales, south of Batemans Bay, were analysed by K–Ar and ⁴⁰Ar/³⁹Ar step‐heating methods. One sample contains relatively abundant detrital muscovite flakes that are locally oblique to the regional cleavage in the rock, whereas the remaining samples appear to contain sparse detrital muscovite. Separates of detrital muscovite yielded plateau ages of 505 ± 3 Ma and 513 ± 3 Ma indicating that inheritance has not been eliminated by metamorphism and recrystallisation. Step‐heating analyses of whole‐rock chips from all four slate samples produced discordant apparent age spectra with ‘saddle shapes’ following young apparent ages at the lowest temperature increments. Elevated apparent ages associated with the highest temperature steps are attributed to the presence of variable quantities of detrital muscovite (<1–5%). Two whole‐rock slate samples yielded similar ⁴⁰Ar/³⁹Ar integrated ages of ca 455 Ma, which are some 15–30 million years older than K–Ar ages for the same samples. These discrepancies suggest that the slates have also been affected by recoil loss/redistribution of ³⁹Ar, leading to anomalously old ⁴⁰Ar/³⁹Ar ages. Two other samples, from slaty tectonic mélange and intensely cleaved slate, yielded average ⁴⁰Ar/³⁹Ar integrated ages of ca 424 Ma, which are closer to associated mean K–Ar ages of 423 ± 4 Ma and 409 ± 16 Ma, respectively. Taking into account the potential influences of recoil loss/redistribution of ³⁹Ar and inheritance, the results from the latter samples suggest a maximum age of ca 440 Ma for deformation/metamorphism. The current results indicate that recoil and inheritance problems may also have affected whole‐rock ⁴⁰Ar/³⁹Ar data reported from other regions of the Lachlan Fold Belt. Therefore, until these effects are adequately quantified, models for the evolution of the Lachlan Fold Belt, that are based on such whole‐rock ⁴⁰Ar/³⁹Ar data, should be treated with caution.     

U‐Th Zircon Dating by Laser Ablation Single Collector Inductively Coupled Plasma‐Mass Spectrometry (LA‐ICP‐MS)

Zircon crystals in the age range of ca. 10–300 ka can be dated by ²³⁰Th/²³⁸U (U‐Th) disequilibrium methods because of the strong fractionation between Th and U during crystallisation of zircon from melts. Laser ablation inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) analysis of nine commonly used reference zircons (at secular equilibrium) and a synthetic zircon indicates that corrections for abundance sensitivity and dizirconium trioxide molecular ions (Zr₂O₃⁺) are critical for reliable determination of ²³⁰Th abundances in zircon. When corrected for abundance sensitivity and interferences, mean activity ratios of (²³⁰Th)/(²³⁸U) for nine reference zircons analysed on five different days averaged 0.995 ± 0.023 (95% confidence weighted by data‐point uncertainty only, MSWD = 1.6; n = 9), consistent with their U‐Pb ages > 4 Ma that imply equilibrium for all intermediate daughter isotopes (including ²³⁰Th) within the ²³⁸U decay chain. U‐Th zircon ages generated by LA‐ICP‐MS without mitigating (e.g., by high mass resolution) or correcting for abundance sensitivity and molecular interferences on ²³⁰Th are potentially unreliable. To validate the applicability of LA‐ICP‐MS to this dating method, we acquired data from three late Quaternary volcanic units: the 41 ka Campanian Ignimbrite (plutonic clasts), the 161 ka Kos Plateau Tuff (juvenile clasts) and the 12 ka Puy de Dôme trachyte lava (all eruption ages by Ar/Ar, with zircon U‐Th ages being of equal or slightly older). A comparison of the corrected LA‐ICP‐MS results with previously published secondary ion mass spectrometry (SIMS) data for these rocks shows comparable ages with equivalent precision for LA‐ICP‐MS and SIMS, but much shorter analysis durations (~ 2 min vs. ~ 15 min) per spot with LA‐ICP‐MS and much simpler sample preparation. Previously undated zircons from the Yali eruption (Kos‐Nisyros volcanic centre, Greece) were analysed using this method. This yielded a large age spread (~ 45 to > 300 ka), suggesting significant antecryst recycling. The youngest zircon age (~ 45 ± 10 ka) provides a reasonable maximum estimate for the eruption age, in agreement with the previously published age using oxygen isotope stratigraphy (~ 31 ka).     

U‐Pb Geochronological and Thermochronological Time–Temperature Constraints of 40Ar/39Ar Hornblende Reference Material HB3gr

Hornblende from the Lone Grove Pluton, Llano Uplift, Texas, has served as an irradiation reference material in ⁴⁰Ar/³⁹Ar studies for decades. In order to evaluate the apparent age bias that currently exists between the U‐Pb and ⁴⁰Ar/³⁹Ar systems, zircon and titanite were dated by isotope dilution‐thermal ionisation mass spectrometry (ID‐TIMS) from the same rock from which the hornblende ⁴⁰Ar/³⁹Ar reference material HB3gr is derived. Zircon U‐Pb data indicate initial crystallisation at 1090.10 ± 0.16 Ma (2s), a date that is 1.7% older than the accepted K‐Ar date (1072 ± 14 Ma, 2s) for HB3gr; an offset that exceeds the typical 0.5–1% bias between the two systems, though remaining within uncertainty due to the large uncertainties in the ⁴⁰K decay constant. Zircon data are presented using both EARTHTIME tracers ET535 and ET2535 and are statistically indistinguishable. Single grain titanite analyses range between 1082 ± 0.75 and 1086 ± 0.81 Ma (2s) and are interpreted to record the subsequent cooling following crystallisation at rates between 30 and 50 °C Ma^?1. This is supported by the observation that hornblende ⁴⁰Ar/³⁹Ar dates corrected for decay constant bias are resolvably younger than the zircon U‐Pb date and in good agreement with titanite U‐Pb dates, permitting the conclusion that both titanite U‐Pb and hornblende ⁴⁰Ar/³⁹Ar systems provide a record of cooling.     

Amphibolite facies retrograde metamorphism of the Zhujiachong eclogite,SE Dabieshan: 40Ar/39Ar age constraints from argon extraction using UV‐laser microprobe,in vacuo crushing and stepwise heating

The Zhujiachong eclogite in the south‐eastern Dabieshan ultra‐high‐P terrane has been overprinted during retrograde metamorphism, with the development of garnet‐amphibolite mineral assemblages in most rocks in the outcrop. This study is focused on providing age constraints for the retrograde amphibolite facies and greenschist facies mineralogy by ⁴⁰Ar/³⁹Ar dating. By applying a novel approach of combining three different techniques for extracting argon: laser stepwise heating of single grains and small separates, a spot fusion technique by UV‐laser ablation microprobe on polished sections and an in vacuo crushing technique for liberating radiogenic argon from fluid inclusions, it is demonstrated that an internally consistent thermal history can be derived. The ⁴⁰Ar/³⁹Ar ages indicate that phengite formed before 265 Ma, probably during the ultra‐high‐P event. Ages associated with amphibolite facies retrograde metamorphism range from 242 to 217 Ma by the analyses of amphibole. Ages of c. 230 Ma were found for the symplectite matrix that formed during retrogression from eclogite pyroxene. Late stage hydrothermal activity leading to the formation of coarse‐grained paragonite and fluid inclusions in vein amphibole was dated at c. 200 Ma. These age results agree well with the mineral crystallization sequence observed from thin‐sections of the retrograded eclogite: phengite → paragonite and amphibole in matrix → amphibole in the corona.     

The geological significance of 40Ar/39Ar and Rb–Sr white mica ages from Syros and Sifnos,Greece: a record of continuous (re)crystallization during exhumation?

The Attic‐Cycladic crystalline belt in the central Aegean region records a complex structural and metamorphic evolution that documents Cenozoic subduction zone processes and exhumation. A prerequisite to develop an improved tectono‐metamorphic understanding of this area is dating of distinct P–T–D stages. To evaluate the geological significance of phengite ages of variably overprinted rocks, ⁴⁰Ar/³⁹Ar and Rb–Sr analyses were undertaken on transitional blueschist–greenschist and greenschist facies samples from the islands of Syros and Sifnos. White mica geochronology indicates a large age variability (⁴⁰Ar/³⁹Ar: 41–27 Ma; Rb–Sr: 34–20 Ma). Petrologically similar samples have either experienced greenschist facies overprinting at different times or variations in ages record variable degrees of greenschist facies retrogression and incomplete resetting of isotopic systematics. The ⁴⁰Ar/³⁹Ar and Rb–Sr data for metamorphic rocks from both islands record only minor, localized evidence for Miocene ages (c. 21 Ma) that are well documented elsewhere in the Cyclades and interpreted to result from retrogression of high‐pressure mineral assemblages during lower pressure metamorphism. Field and textural evidence suggests that heterogeneous overprinting may be due to a lack of permeability and/or limited availability of fluids in some bulk compositions and that retrogression was more or less parallel to lithological layering and/or foliation as a result of, possibly deformation‐enhanced, channelized fluid ingress. Published and new ⁴⁰Ar/³⁹Ar and Rb–Sr data for both islands indicate apparent age variations that can be broadly linked to mineral assemblages documenting transitional blueschist‐to‐greenschist‐ and/or greenschist facies metamorphism. The data do not record the timing of peak HP metamorphism, but may accurately record continuous (partial) resetting of isotopic systematics and/or (re)crystallization of white mica during exhumation and greenschist facies retrogression. The form of ⁴⁰Ar/³⁹Ar phengite age spectra are complex with the lowest temperature steps yielding Middle to Late Miocene ages. The youngest Rb–Sr ages suggest maximum ages of 20.6 ± 0.8 Ma (Syros) and 22.5 ± 0.6 Ma (Sifnos) for the timing of greenschist facies overprinting. The results of this study further accentuate the challenges of interpreting isotopic data for white mica from polymetamorphic terranes, particularly when mixing of populations and/or incomplete resetting of isotopic systematics occurs during exhumation. These data capture the full range of isotopic age variations in retrogressed HP rocks documented in previous isotopic studies, and can be interpreted in terms of the geodynamic evolution of the Aegean.     

Age calibration of the Fish Canyon sanidine Ar/Ar dating standard using primary K-Ar standards

The ⁴⁰Ar/³⁹Ar dating technique requires the use of neutron fluence monitors (standards). Precise calibrations of these standards are crucial to decrease the uncertainties associated with ⁴⁰Ar/³⁹Ar dates. Optimal calibration of ⁴⁰Ar/³⁹Ar standards should be based on K/Ar standards having independent isotope dilution measurements of ⁴⁰K and ⁴⁰Ar*, based on independent isotope tracers (spikes) because this offers the possibility to eliminate random interlaboratory errors. In this study, we calibrate the widely used Fish Canyon sanidine (FCs) standard based on four primary K/Ar standards (GA-1550, Hb3gr, NL-25, and GHC-305) on which K and Ar* concentrations have been determined in different labs with independently calibrated tracers. We obtained a mean age of 28.03 ± 0.08 Ma (1σ; neglecting uncertainties of the ⁴⁰K decay constants) for FCs, based on the decay constant recommended by Steiger and Jäger [Steiger R.H., Jäger. E. 1977. Subcommission on geochronology: convention of the use of decay constants in geo- and cosmochronology. Earth Planet. Sci. Lett.36, 359-362.]. This age corresponds to a mean ⁴⁰Ar*/⁴⁰K value of (1.6407 ± 0.0047) × 10⁻³. We also discuss several criteria that prevent the use of previous calibrations of FCs based on other primary standards (LP-6, SB-3 and MMhb-1). The age of FCs obtained in this study is based on the ⁴⁰K decay constants of Steiger and Jäger (1977) but we anticipate the imminent need for revision of the value and precision of the ⁴⁰K decay constants (representing the main source of uncertainties in ⁴⁰Ar/³⁹Ar dating). The ⁴⁰Ar*/⁴⁰K result of FCs obtained in this study allows therefore a rapid calibration of the age of FCs with uncertainties at the 0.29% level but perhaps more importantly this value is independent of any particular value of the ⁴⁰K decay constants and may be used in the future in conjunction with revised decay constants.     

Phlogopite40Ar/39Ar geochronology of mantle xenoliths from the North China Craton: Constraints on the eruption ages of Cenozoic basalts

Mantle xenoliths provide direct information about lithospheric evolution and asthenosphere–lithosphere interaction, and therefore precise dating of the host basalts which carried the xenoliths is important. Here we report ⁴⁰Ar/³⁹Ar geochronology of phlogopite separates from five spinel lherzolite xenoliths collected from the North China Craton (Hannuoba of Hebei Province, Sanyitang of Inner Mongolia Autonomous Region and Hebi of Henan Province), as well as the groundmass of the host basalts. Argon extraction was performed by conventional step heating technique and ultra-violet laser ablation microprobe (UVLAMP) technique. ⁴⁰Ar/³⁹Ar incremental heating results on groundmass yielded geologically meaningless ages. However, conventional step heating on phlogopites produced Miocene cooling ages, identical to the eruption ages obtained from the K–Ar dating methods of the Hannuoba and Sanyitang basalts. Adopting procedures to exclude potential influence of excess radiogenic Ar from a deep fluid source on a phlogopite separate from lherzolite yielded results with a good agreement of ages suggesting that the argon isotopes are distributed homogenously in this mineral, with no influence of excess argon. Phlogopites from Hebi yield ages between 6.43 and 6.44 Ma which are slightly older than those obtained from K–Ar method on whole-rocks. The discrepancy in the K–Ar ages obtained from the altered whole-rock samples suggests partial loss of ⁴⁰Ar. As a consequence, phlogopite Ar–Ar ages are considered more accurate than that of the whole-rocks. These results suggest that ⁴⁰Ar/³⁹Ar chronology of phlogopite provides reliable and precise ⁴⁰Ar/³⁹Ar ages of host basalts.     

Mineralization events in the Xiaokele porphyry Cu (–Mo) deposit,NE China: Evidence from zircon U–Pb and K‐feldspar Ar–Ar geochronology and petrochemistry

The Great Xing'an Range (GXR), Northeast (NE) China, is a major polymetallic metallogenic belt in the eastern segment of the Central Asian Orogenic Belt. The newly discovered Xiaokele porphyry Cu (–Mo) deposit lies in the northern GXR. Field geological and geochronological studies have revealed two mineralization events in this deposit: early porphyry‐type Cu (–Mo) mineralization, and later vein‐type Cu mineralization. Previous geochronological studies yielded an age of ca. 147 Ma for the early Cu (–Mo) mineralization. Our ⁴⁰Ar/³⁹Ar dating yielded ⁴⁰Ar/³⁹Ar plateau ages of 124.8 ± 0.4 to 124.3 ± 0.4 Ma on K‐feldspar in altered Cu‐mineralized diorite porphyrite dikes that represent the overprinting vein‐type Cu mineralization, consistent with zircon U–Pb ages of the diorite porphyrite (126.4 ± 0.5 to 125.0 ± 0.5 Ma). The Cr and Ni contents and Mg^# of the Xiaokele diorite porphyrites are high. The diorite porphyrites at Xiaokele are enriched in light rare‐earth elements (REEs), and large‐ion lithophile elements (e.g., Rb, Ba, and K), are depleted in heavy REEs and high‐field‐strength elements (e.g., Nb, Ta, and Ti), and have weak negative ε_Hf(t) values (+0.29 to +5.27) with two‐stage model ages (T_DM2) of 1,164–845 Ma. Given the regional tectonic setting in Early Cretaceous, the ore‐bearing diorite porphyrites were likely formed in an extensional environment related to lithospheric delamination and asthenospheric upwelling induced by subduction of the Paleo‐Pacific Plate. These tectonic events caused large‐scale magmatic activity, ore mineralization, and lithospheric thinning in NE China.     

Protracted garnet growth in high‐P eclogite: constraints from multiple geochronology and P–T pseudosection

Understanding convergent margin processes requires determination of the onset and the termination of subduction, the duration of subduction‐zone metamorphism, and the subduction zone polarity. Garnet growth and intracrystalline zonation can be used to constrain the timing, duration and kinetics of tectonometamorphic processes. An eclogite from the Huwan shear zone in the Hong'an orogen was investigated with combined pseudosection analysis and multiple geochronologies. The pseudosection analysis illustrates that garnet growth is continuous and along an early near‐isothermal trajectory followed by a near‐isobaric heating path from 1.9 GPa/500 °C to 2.4 GPa/575 °C and subsequent near‐isothermal decompression. ⁴⁰Ar/³⁹Ar dating of an amphibole inclusion in garnet from the eclogite yielded an age of 310 ± 5 Ma, which is consistent with a U–Pb age of 305 ± 3 Ma for the metamorphic zircon within uncertainty. Garnet core and rim material produced Lu–Hf ages of 296.9 ± 3.8 and 256.9 ± 3.9 Ma respectively; the latter is consistent with its Sm–Nd age of 254.3 ± 4.6 Ma for the same aliquots. Similarly, limited zircon U–Pb ages of c. 257 Ma were obtained in zircon rims with garnet inclusions. These ages were interpreted to bracket the period of garnet growth and the difference of up to c. 40 Ma is best explained by protracted garnet growth. We propose that the rocks represent detachment of part of the downgoing slab and remained free of significant compression/decompression or heating/cooling close to the subduction channel, most likely underplating the mantle wedge, for a long time. These rocks were incorporated into the following subduction channel due to the successive entry of the buoyant materials, and exhumed at some time later than c. 254 Ma. The increasing observations of protracted garnet growth and long‐lived subduction in various orogens worldwide demand more sophisticated geodynamic models.     

40Ar/39Ar Dating of Xuebaoding Granite in the Songpan-Garzê Orogenic Belt, Southwest China, and its Geological Significance

<正>Thus far,our understanding of the emplacement of Xuebaoding granite and the occurrence and evolution of the Songpan-Garze Orogenic Belt has been complicated by differing age spectra results.Therefore,in this study,the ~(40)Ar/~(39)Ar and sensitive high resolution ion micro-probe(SHRIMP) U-Pb dating methods were both used and the results compared,particularly with respect to dating data for Pankou and Pukouling granites from Xuebaoding,to establish ages that are close to the real emplacements.The results of SHRIMP U-Pb dating for zircon showed a high amount of U,but a very low value for Th/U.The high U amount,coupled with characteristics of inclusions in zircons,indicates that Xuebaoding granites are not suitable for U-Pb dating.Therefore,muscovite in the same granite samples was selected for ~(40)Ar/~(39)Ar dating.The ~(40)Ar/~(39)Ar age spectrum obtained on bulk muscovite from Pukouling granite in the Xuebaoding,gave a plateau age of 200.1±1.2 Ma and an inverse isochron age of 200.6±1.2 Ma.The ~(40)Ar/~(39)Ar age spectrum obtained on bulk muscovite from Pankou granite in the Xuebaoding gave another plateau age of 193.4±1.1 Ma and an inverse isochron age of 193.7±1.1 Ma. The ~(40)Ar/~(36)Ar intercept of 277.0±23.4(2σ) was very close to the air ratio,indicating that no apparent excess argon contamination was present.These age dating spectra indicate that both granites were emplaced at 200.6±1.3 Ma and 193.7±1.1 Ma,respectively.Through comparison of both dating methods and their results,we can conclude that it is feasible that the muscovite in the granite bearing high U could be used for ~(40)Ar/~(39)Ar dating without extra Ar.Based on this evidence,as well as the geological characteristics of the Xuebaoding W-Sn-Be deposit and petrology of granites,it can be concluded that the material origin of the Xuebaoding W-Sn-Be deposit might partially originate from the Xuebaoding granite group emplacement at about 200 Ma.Moreover,compared with other granites and deposits distributed in various positions in the Songpan-Garze Orogenic Belt,the Xuebaoding emplacement ages further show that the main rare metal deposits and granites in peripheral regions occurred earlier than those in the inner Songpan-Garze.Therefore,~(40)Ar/~(39)Ar dating of Xuebaoding granite will lay a solid foundation for studying the occurrence and evolution of granite and rare earth element deposits in the Songpan-Garze Orogenic Belt.