Diagenesis and incipient metamorphism in the western fold-and-thrust belt,SW Urals,Russia

In the western fold-and-thrust belt of the southern Urals, the Kübler and Árkai indices determined on shales, slates and phyllites record an increase from lower late diagenetic to epizonal grade from west to east. The metamorphic grade varies strongly within the different tectonic segments, which are separated by major thrusts. The increase of diagenetic and incipient metamorphic grade from the footwall to the hanging wall of all major Upper Palaeozoic thrusts indicates a pre-Permo/Triassic origin. West of the Avzyan thrust zone, the diagenetic to incipient metamorphic grade is related to the Palaeozoic basin development and reached the final grades in Late Carboniferous to Early Permian times. East of the first Avzyan thrust in the Yamantau anticlinorium, the diagenetic to lower greenschist metamorphic grade is possibly of Neoproterozoic origin and might be related to the development of the Neoproterozoic basin at the eastern margin of the East European Craton. The eastern part of the Yamantau anticlinorium was exhumed below 200 °C in the Late Carboniferous or Early Permian. The diagenetic grade of the autochthonous Palaeozoic sedimentary units increases toward the stack of Palaeozoic nappes and might partly be caused by the deformational process due to the emplacement of the Palaeozoic nappes. Within the Timirovo thrust sheet, the decrease of metamorphic grade with stratigraphic age developed prior to the emplacement of the nappes. The upper anchizonal metamorphic grade of the Upper Devonian slates of the Zilair nappe results from the deformation process related to the Lower Carboniferous nappe emplacement.     

Isotope geochemistry of the Tieluping silver-lead deposit, Henan, China: A case study of orogenic silver-dominated deposits and related tectonic setting

The Tieluping silver deposit, which is sited along NE-trending faults within the high-grade metamorphic basement of the Xionger Terrane in the Qinling orogenic belt, is part of an important, recently discovered Mesozoic orogenic-type Ag-Pb belt. Ore formation includes three stages: an early barren quartz-pyrite stage (E), an intermediate polymetallic sulfide ore stage (M), and a late barren carbonate stage (L). Carbon, sulfur and lead isotope systematics indicate that the E-stage fluids are deeply sourced; the L-stage fluids are shallow-sourced meteoric water; whereas the M-stage fluids are a mix of deep-sourced and shallow-sourced fluids. Sulfur and lead isotope data show that the ore-forming fluids must have originated from a source with elevated radiogenic lead and low ³⁴S values, that differs significantly from exposed geologic units in the Xionger Terrane, the lower crust and the mantle. This supports the view that the carbonate-shale-chert sequences of the Guandaokou and Luanchuan Groups south of the Machaoying fault might be the favorable sources, although little is known about their isotopic compositions. A tectonic model that combines collisional orogeny, metallogeny and hydrothermal fluid flow is proposed to explain the formation of the Tieluping silver deposit. During the Mesozoic collision between the North China Craton and South China Block (Early-Mid Triassic Indosinian Orogeny), crustal slabs containing the carbonate-shale-chert sequences of the Guandaokou and Luanchuan Groups, locally rich in organic matter (carbonaceous shale), were thrust northwards beneath the Xionger Terrane along the Machaoying fault. Metamorphic devolatilisation of this underthrust slab probably provided the ore-forming fluids to develop the Ag-Pb ore belt, which includes the Tieluping silver deposit. Fluids and magmas were emplaced during extensional stages related to the Jurassic-Cretaceous Yanshanian Orogeny.Editorial Handling: B. Lehmann     

NOAA Weather Radio (NWR) – A Coastal Solution to Tsunami Alert and Notification

The Washington State/Local Tsunami Work Group adopted the NOAA Weather Radio All-Hazards Warning System to warn citizens quickly and effectively of not only tsunami hazards but also other natural or man-made hazards. In concert with an array of deep ocean tsunami detectors, land-based seismic sensors, and warning messages issued by the tsunami warning centers, NWR provides a means to expeditiously get critical decision-making information to emergency managers, elected officials, and first responders. To implement the NWR strategy effectively, a partnership was developed to add a repeater to the NWR system to provide complete coverage to the coast of Washington and to shipping lanes off the coast. The Work Group also recognized the need to disseminate time critical hazard information on tsunamis to the public on beaches and in high traffic areas, so it developed a new notification system, with the first prototype installed on 2 July 2003 in Ocean Shores, Washington. A public education program also was developed to improve the impacted communities understanding of the tsunami hazard, the warning system, and actions they should take if a tsunami occurs.     

On the reliability of different methods of seismic hazard assessment in Greece

Historical and present century instrumental data have been used to determine seismic hazard in 35 sites of Greece by the application of Cornell's method (Cornell, 1968) and the mean value method. The macroseismic intensity has been considered as a measure of seismic hazard. Comparison of the results of the two methods showed that, in general, the mean value method gives higher values, particularly for low probabilities of exceedance. In addition, for some sites, the differences of the expected intensities resulting from the two methods, indicate that finer tuning of the seismogenic souce model is required, or suggest time dependence. Although each one of these methods has its own merits, the method based on seismic zonation (Cornell's method) has several advantages and must be preferred when an accurate zonation is possible by the use of macroseismic and instrumental seismic data, together with geological and geomorphological information. However, reliable estimates of seismic hazard at a particular site require work on a microzoning scale, incorporating historical, archaeological, and recent geological data.Paper presented at the 21st General Assembly of the European Seismological Commission held in Sofia, 1988.     

Valent state and coordination of cobalt Ions in beryl and chrysoberyl crystals

We have studied the polarized optical absorption and EPR spectra of Co-doped beryls grown by hydrothermal, flux, and gas-transport methods, and chrysoberyl grown by the Czochralski method. In beryls three groups of bands, belonging to three various Co centers, were distinguished by analysis of the absorption band intensities. The first group, bands with maxima at 22 220 (E c), 17 730 (E c), and 9090 (E c), 7520 (E c) cm^–1 are due to Co²⁺ in octahedral site of Al³⁺. The second group is bands at 18 940, 18 250, 17 700 (E c), 18 300, 17 700, 17 000 (E c) and 8830 (E c), 7350 (E c) cm^–1 and 5320 (E c), 3880 (E c) cm^–1, which are caused by Co²⁺ in tetrahedral site of Be²⁺. A weak wide band in flux and gas-transport beryl in the region of 12 500–8300 cm^–1 (E , c) is related to Co³⁺ in octahedral Al³⁺ site. In hydrothermal beryl, bands 13 200 (E c), 10 900 (E c), and 8500 (E c) cm^–1 are caused by an uncontrolled impurity of Cu²⁺ ions. For Co-doped chrysoberyl one type of center of Co has been established: Co²⁺ in the octahedral site of Al³⁺. In the approximation of the trigonal field with regard to Trees correction, the energy levels of Co²⁺ have been calculated in octahedral and tetrahedral coordination. There is good agreement between the obtained experimental and calculated data. The polarization dependence of the optical absorption bands is explained well in terms of the spin-orbit interaction.     

Radon in soil anomaly observed at Los Azufres geothermal field,Michoacan: a possible precursor of the 1985 Mexico earthquake (Ms = 8.1)

A radon anomaly in a nuclear track detector placed on a fault was detected prior to the destructive (Ms = 8.1) Mexican earthquake of 19 September 1985. The fault is a structural feature of the geothermal field Los Azufres, 260 km NE of the epicentral area. Since no other phenomenon can be found as a possible cause for the radon anomaly, it is proposed that preseismic regional stress perturbations may produce changes in the fluid transport patterns at the fault, suggesting that radon measurements in similar conditions could provide a good precursor in high seismic risk areas.     

Late Silurian fish microfossils from Helvetesgraven,Skåne (southern Sweden) (I)

Geologie en Mijnbouw - The fauna from a Late Silurian residue sample from Övedskloster (Skåne) is listed. It comprises scales of ‘Agnatha’ (rare osteostracan scales, and the...     

New latest Cretaceous microvertebrate fossil assemblages from the Haţeg Basin (Romania)

Late Cretaceous terrestrial ecosystems in southern Europe are relatively poorly known, although much progress has been made during the past decade, principally with regard to the microvertebrate components of these ecosystems. The Maastrichtian terrestrial deposits of the Haeg Basin, at the easternmost end of the South European archipelago and well known for reptilian fossils (e.g., turtles, crocodilians, pterosaurs and dinosaurs), have been thoroughly screened during the past five years. Important microvertebrate assemblages, both quantitatively and qualitatively speaking, were found at Pui (Sînpetru Formation), Tutea and, particularly, Vlioara (Densu-Ciula Formation). Several new taxa are noted here for the first time for the Haeg Basin, including gars, discoglossids, albanerpetontids, scincomorphan and anguimorphan lizards; dromaeosaurids and multituberculates are confirmed. Most of the microvertebrate remains are poorly preserved and precise systematic assignment has proved difficult. The Haeg fauna appears to be primitive and endemic, with a Neopangean core composition, and suggests a composite palaeobiogeographic origin for the Late Cretaceous European ecosystems, confirming conclusions reached in studies of the larger vertebrates.     

Timing of low-temperature metamorphism and cooling of the Paleozoic and Mesozoic formations of the Bükkium,innermost Western Carpathians,Hungary

K-Ar ages of illite-muscovite and fission track ages of zircon and apatite were determined from various lithotypes of the Bükkium, which forms the innermost segment of the Western Carpathians. The stratigraphic ages of these Dinaric type formations cover a wide range from the Late Ordovician up to the Late Jurassic. The grade of the orogenic dynamo-thermal metamorphism varies from the late diagenetic zone through the anchizone up to the epizone (chlorite, maximally biotite isograd of the greenschist facies). The K-Ar system of the illite-muscovite in the < 2 m grain-size fraction approached equilibrium only in epizonal and high-temperature anchizonal conditions. The orogenic metamorphism culminated between the eo-Hellenic (160-120 Ma) phase connected to the beginning of the subduction in the Dinarides, and the Austrian (100-95 Ma) phase characterized by compressional crustal thickening. No isotope geochronological evidence was found for proving any Hercynian recrystallization. The stability field of fission tracks in zircon was approached using the thermal histories of the different tectonic units. A temperature less than 250°C and effective heating time of 20–30 Ma had only negligible effects on the tracks, whereas total annealing was reached between 250 and 300°C. Apatite fission track ages from the Paleozoic and Mesozoic formations show that the uplift of the Bükk Mountains occurred only in the Tertiary (not earlier than ca. 40 Ma ago). Thermal modeling based on apatite fission track length spectra and preserved Paleogene sediment thickness data proved that the Late Neogene burial of the recently exhumed plateau of the Bükk Mountains exceeded 1 km.     

Geochronology and geochemistry of eclogites from the Mariánské Lázně Complex,Czech Republic: Implications for Variscan orogenesis

The Mariánské Lázn complex (MLC) is located in the Bohemian Massif along the north-western margin of the Teplá-Barrandian microplate and consists of metagabbro, amphibolite and eclogite, with subordinate amounts of serpentinite, felsic gneiss and calcsilicate rocks. The MLC is interpreted as a metaophiolite complex that marks the suture zone between the Saxothuringian rocks to the north-west and the Teplá-Barrandian microplate to the south-east. Sm-Nd geochronology of garnet-omphacite pairs from two eclogite samples yields ages of 377±7, and 367±4 Ma. Samples of eclogite and amphibolite do not define a whole rock Sm-Nd isochron, even though there is a large range in Sm/Nd ratio, implying that the suite of samples may not be cogenetic. Eclogites do not have correlated _Nd values and initial ⁸⁷Sr/⁸⁶Sr ratios. Five of the eight eclogite samples have high _Nd values (+10.2 to +7.1) consistent with derivation from a MORB-like source, but variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7059) which probably reflect hydrothermal seawater alteration. Three other eclogite samples have lower _Nd values (+ 5.4 to –0.8) and widely variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7096). Such low _Nd values are inconsistent with derivation from a MORB, source and may reflect a subduction or oceanic island basalt component in their source. The MLC is an important petrotectonic element in the Bohemian Massif, providing evidence for Cambro-Ordovician formation of oceanic crust and interaction with seawater, Late Devonian (Frasnian-Famennian) high- and medium-pressure metamorphism related to closure of a Saxothuringian ocean basin, Early Carboniferous (Viséan) thrusting of the Teplá terrane over Saxothuringian rocks and Late Viséan extension.     

Local Sensitivity Analysis of a Numerical Model of Volcanic Plinian Columns through Automatic Differentiation

Numerical simulation of geological phenomena are nowadays widely used to understand them. A good example are the numerous codes developed to model mass motion in different processes. Such models are approximations to the real phenomena because the physical conditions are simplified or because the values of the parameters intervening in the modeling are known only approximately. For this reason, an obligatory step in the application of these models is the assessment of their sensitivity to changes in the parameters. Sensitivity analysis is also required to evaluate the influence of the different input variables in the outcome of the model. In general this analysis is carried out by repeated computation of the model to different sets of input variables and settings of the model. A more fruitful procedure to carry out such analysis can be achieved by automatic differentiation. In this paper we illustrate such approach through its application to the model of an eruptive plinian column. The results of the analysis allow to assess, in a systematic and efficient manner, the relevance of the different boundary values and parameters of the model. The analysis reveals the effects on velocity, temperature, gas fraction, radius and ultimately column height, by changes in their boundary value (i.e. at the vent). The effect of changes in the value of the gas constants, density of pyroclasts and specific heat of the erupted material is also evidenced. Alternatively, the results can be regarded as a mean to estimate the values of the variables for different set of boundary values without recurring to new runs of the model. Automatic differentiation is shown to be a convenient scheme to obtain derivatives of model variables. This type of analysis forms in addition the basis for further work in inversion schemes.     

Evaluation of rock excavatability and slope stability along a segment of motorway,Pozanti, Turkey

The Çiftehan-Pozant segment of the Ankara-Pozant motorway is problematic due to the existence of lithological units with variable character. Seven cut slopes are planned along Km 358+000– Km 364+350 of the proposed motorway. The purpose of this study is to determine engineering geological properties of the rocks exposed along the motorway and to assess the excavatability and stability of the cut slopes. Both field and laboratory studies were carried out during this study. Field studies involved geological mapping, detailed discontinuity surveying and sampling. Laboratory tests were carried out to determine unit weight, point load strength index and shear strength parameters of the discontinuities. In the study area, recrystallized limestone, microgabbro, conglomerate and Quaternary deposits are exposed. However, the cut slopes are located within microgabbro and conglomerate. Hard to very hard ripping with local blasting for the fresh inner part of the rocks is recommended for the excavatability. In two cut slopes wedge failure is expected, whereas in another two slopes both wedge and toppling failures are likely to occur. Based on the field observations and stability analyses of the cut slopes, slope flattening with various angles, wire mesh, and drainage ditches are proposed.     

Estimation of environmental impacts on the water quality of the Tahtalıdam watershed in İzmir, Turkey

Water pollution is a widespread problem in different areas of the world. Some of these problems originated from point contamination sources and widespread contaminant outlet sources which are observed in every country. The major elements and chemical loads of surface water have been dominated by constituents derived directly or indirectly from human activities and/or industrial practices that have increased additives in the last several decades. The point sources of contamination may result from the direct wastewater discharges to the dam sites, which are considered to be the most commonly encountered water pollution problems. One of these problems is the eutrophication process which usually occurs in the static water mass of lakes and other surface water reservoirs. This process may be caused by the continuous increase of nitrogen and phosphorus contents and decrease of O₂ level in water causing an anaerobic condition which may stimulate algae-growth flow in these water bodies, consequently reducing the quality of water. Of course, there are many research methods for determining the various kinds of water pollution. In this research, the hydrochemical parameters were evaluated to estimate the types of pollution sources, the level of pollution, and its environmental impacts on the Tahtal dam reservoir.     

Vibrational spectroscopy of beta-eucryptite (LiAlSiO<Subscript>4</Subscript>): optical phonons and phase transition(s)

The structural behavior of -eucryptite (LiAlSiO₄) has been investigated using infrared (IR) spectroscopy over a temperature range of 20 to 900 K and FT-Raman spectroscopy at room temperature. IR reflectance measurements show that -eucryptite possesses high reflectivity in the far-IR region, as is consistent with its reported superionic conductivity along the c-axis. On heating, the Li-related IR bands near 246 and 300 cm^–1 (with A₂ symmetry) broadened and weakened dramatically, presumably as a result of Li⁺ positional disordering along the structural channels parallel to c. The disordering process appears to induce a framework distortion, as is evidenced by the broadening of some vibrations of Si(Al)–O with increasing temperature. A change in slope in the temperature dependence of the phonon frequency near 300 cm^–1 and the linewidth of the 760 cm^–1 band at 715 K indicates that Li becomes completely disordered above this temperature. In addition, the temperature dependence of the linewidth for the 760 cm^–1 band exhibits an additional change in slope at 780 K, implying the existence of an intermediate state within this temperature range. The detailed structure of this intermediate phase, however, needs further study. Our IR data provide no indication of structural changes between room temperature and 20 K.     

A study of the modelling error in two operator splitting algorithms for porous media flow

Operator splitting methods are often used to solve convection–diffusion problems of convection dominated nature. However, it is well known that such methods can produce significant (splitting) errors in regions containing self sharpening fronts. To amend this shortcoming, corrected operator splitting methods have been developed. These approaches use the wave structure from the convection step to identify the splitting error. This error is then compensated for in the diffusion step. The main purpose of the present work is to illustrate the importance of the correction step in the context of an inverse problem. The inverse problem will consist of estimating the fractional flow function in a onedimensional saturation equation.     

Noril’sk–Talnakh Cu–Ni–PGE deposits: a revised tectonic model

The Norilsk mining district is located at the northwest margin of the Tunguska basin, in the centre of the 3,000×4,000 km Siberian continental flood basalt (CFB) province. This CFB province was formed at the Permo-Triassic boundary from a superplume that ascended into the geometric centre of the Laurasian continent, which was surrounded by subducting slabs of oceanic crust. We suggest that these slabs could have reached the core–mantle boundary, and they may have controlled the geometric focus of the superplume. The resulting voluminous magma intruded and erupted in continental rifts and related extensive flood basalt events over a 2–4 Ma period. Cu–Ni–PGE sulfide mineralization is found in olivine-bearing differentiated mafic intrusions beneath the flood basalts at the northwestern margin of the Siberian craton and also in the Taimyr Peninsula, some 300 km east of a triple junction of continental rifts, now buried beneath the Mesozoic–Cenozoic sedimentary basin of western Siberia. The Norilsk-I and Talnakh-Oktyabrsky deposits occur in the Norilsk–Kharaelakh trough of the Tunguska CFB basin. The Cu–Ni–PGE-bearing mineralized intrusions are 2–3 km-wide and 20 km-long differentiated chonoliths. Previous studies suggested that parts of the magma remained in intermediate-level crustal chambers where sulfide saturation and accumulation took place before emplacement. The 5–7-km-thick Neoproterozoic to Palaeozoic country rocks, containing sedimentary Cu mineralization and evaporites, may have contributed additional metal and sulfur to this magma. Classic tectonomagmatic models for these deposits proposed that subvertical crustal faults, such as the northeast-trending Norilsk–Kharaelakh fault, were major trough-parallel conduits providing access for magmas to the final chambers. However, geological maps of the Norilsk region show that the Norilsk–Kharaelakh fault offsets the mineralization, which was deformed into folds and offset by related reverse faults, indicating compressional deformation after mineralization in the Late Triassic to Early Jurassic. In addition, most of the intrusions are sills, not dykes as should be expected if the vertical faults were major conduits. A revised tectonic model for the Norilsk region takes into account the fold structure and sill morphology of the dominant intrusions, indicating a lateral rather than vertical emplacement direction for the magma into final chambers. Taking into account the fold structure of the country rocks, the present distribution of the differentiated intrusions hosting the Norilsk-I and Talnakh–Oktyabrsky deposits may represent the remnants of a single, >60 km long, deformed and eroded palm-shaped cluster of mineralized intrusions, which are perceived as separate intrusions at the present erosional level. The original direction of sill emplacement may have been controlled by a northeast-trending paleo-rise, which we suggest is present at the southeastern border of the Norilsk–Kharaelakh trough based on analysis of the unconformity at the base of the CFB. The mineralized intrusions extend along this rise, which we interpret as a structure that formed above the extensionally tilted block in the metamorphic basement. Geophysical data indicate the presence of an intermediate magma chamber that could be linked with the Talnakh intrusion. In turn, this T-shaped flat chamber may link with the Yenisei–Khatanga rift along the northwest-trending Pyasina transform fault, which may have served as the principal magma conduit to the intermediate chamber. It then produced the differentiated mineralized intrusions that melted through the evaporites with in situ precipitation of massive, disseminated, and copper sulfide ore. The Norilsk–Kharaelakh crustal fault may not relate to mineralization and possibly formed in response to late Mesozoic spreading in the Arctic Ocean.Editorial handling: P. Lightfoot     

Influence of Heterogeneity of Mechanical Properties on Hydraulic Fracturing in Permeable Rocks

Summary Numerical simulations of circular holes under internal hydraulic pressure are carried out to investigate the hydraulic fracture initiation, propagation and breakdown behavior in rocks. The hydraulic pressure increases at a constant rate. The heterogeneity of the rocks is taken into account in the study by varying the homogeneity index. In addition, the permeability is varied with the states of stress and fracture. The simulations are conducted by using a finite element code, F-RFPA^2D, which couples the flow, stress and damage analyses. The simulation results suggest that the fracture initiation and propagation, the roughness of the fracture path and the breakdown pressure are influenced considerably by the heterogeneity of rocks. The hole diameter elongation and the stress field evolution around the fracture tip during the fracture propagation can also provide useful information for the interpretation of the hydraulic fracturing behaviour.     

Volcanic and Scientific Activity at Kick ’em Jenny Submarine Volcano 2001–2002: Implications for Volcanic Hazard in the Southern Grenadines,Lesser Antilles

Kick em Jenny submarine volcano, ~8 km north of Grenada, has erupted at least 12 times since it was first discovered in 1939, making it the most frequently active volcano in the Lesser Antilles arc. The volcano lies in shallow water close to significant population centres and directly beneath a major shipping route, and as a consequence an understanding of the eruptive behaviour and potential hazards at the volcano is critical. The most recent eruption at Kick em Jenny occurred on December 4 2001, and differed significantly from past eruptions in that it was preceded by an intensive volcanic earthquake swarm. In March 2002 a multi-beam bathymetric survey of the volcano and its surroundings was carried out by the NOAA ship Ronald H Brown. This survey provided detailed three-dimensional images of the volcano, revealing the detailed morphology of the summit area. The volcano is capped by a summit crater which is breached to the northeast and which varies in diameter from 300 to 370 m. The depth to the summit (highest point on the crater rim) is 185 m and the depth to the lowest point inside the crater is 264 m. No dome is present within the crater. The crater and summit region of Kick em Jenny are located at the top of an asymmetrical cone which is about 1300 m from top to bottom on its western side. It lies within what appear to be the remnants of a much larger arcuate collapse structure. An evaluation of the morphology, bathymetry and eruptive history of the volcano indicates that the threat of eruption-generated tsunamis is considerably lower than previously thought, mainly because the volcano is no longer thought to be growing towards the surface. Of more major and immediate concern are the direct hazards associated with the volcano, such as ballistic ejecta, water disturbances and lowered water density due to degassing.     

Using numerical modelling to evaluate tsunami hazard near the Kuril Island

A sequence of computer experiments is used to study questions concerning the tsunami problem as a quantitative estimate of tsunami danger, detailed geographical tsunami classification, determination of the parameters of critical tsunami waves, and the conditions of their development. We call a wave critical, if its impact on the coast is most hazardous.Using the Middle Kuril Island as an example, we present the results of a computer experiment which includes determining the wavefields on the shelf and estimating the effects connected with the deep-water Bussol and Diana Straits.Numerical simulation of tsunami waves of different sources permits the assessment of the extent of tsunami danger in different areas of the coastal zone of Simushir Island, depending on the location of the focus zone and their geometry.The major singularities of the wavefield arise in the zones of the deep-water straits. The distribution of the amplification factors is determined by both the global parameters of the wavefields and the local properties of individual harbours. The results obtained for a particular harbour in the northern part of Simushir Island, formed the basis for the quantitative estimate of tsunami danger for this area.