Topographic predictors of susceptibility to alluvial fan flooding,Southern Apennines

The flooding susceptibility of alluvial fans in the Southern Apennines has long been neglected. To partly address this oversight, we focus on the region of Campania which contains highly urbanized piedmont areas particularly vulnerable to flooding. Our findings are based on stratigraphic analysis of the fans and morphometric analysis of the basin‐fan systems. Using geomorphological analysis we recognized active alluvial fans while stratigraphic analysis together with statistical analysis of the morphometric variables was used to classify the fans in terms of the transport process involved. The results indicate that in the geological context examined, the best discrimination between debris flow (Df) and water flood (Wf) processes is achieved by means of two related variables, one for the basin (feeder channel inclination, Cg) and one for the fan (fan length, Fl). The probability that an unclassified fan belongs to group Wf is computed by applying a logistic function in which a P value exceeding 0.5 indicates that a basin/fan system belongs to group Wf. This important result led to the classification of the entire basin/fan system data. As regards process intensity, debris flow‐dominated fans are susceptible to the occurrence of flows with high viscosity and hence subject to more severe events than water flood‐dominated fans. Bearing this in mind, the data gathered in this study allow us to detect where alluvial fan flooding might occur and give information on the different degrees of susceptibility at a regional scale. Regrettably, urban development in recent decades has failed to take the presence of such alluvial fans into account due to the long recurrence time (50–100 years) between floods. This paper outlines the distribution of such susceptibility scenarios throughout the region, thereby constituting an initial step to implementing alluvial fan flooding control and mitigation. Copyright © 2012 John Wiley & Sons, Ltd.     

The formation of fan-deltas in mountain lakes: Findings from Zelené Kežmarské Lake (Slovakia)

Fan-deltas are formed in mountain lakes, contributing to changes in shorelines' shapes and filling lake basins with sediments. Factors that condition sediment delivery to the lakes and the formation of fan-deltas are not fully understood. This study aims to identify processes forming fan-deltas in mountain lakes based on the sedimentary architecture of a fan-delta filling Zelené Kežmarské Lake (Slovakia). Our study is based on ground-penetrating radar and seismic refraction surveys conducted over the lake and debris-flow fans in its vicinity, and grain-size analyses of the surface deposits. The internal structure of the fan-delta comprises foreset deposits representing the fan-delta lobes. Mouth bars were identified in the near-shore zone. The fan-delta is built of sands and silty sands whereas an alluvial debris-flow dominated fan west of the lake contains gravels. A general trend of downslope fining of the fan surface sediments, disturbed by zones of coarse gravels, was identified in the surficial sediments forming the fan. The fan-delta was formed by depositional events in humid periods, alternating with dry periods featured with a small or no deposition. The lake-level steadily rose in the humid periods and remained stable in dry periods. The contrast between the coarse sediments forming the alluvial debris-flow dominated fan, and sands forming the fan-delta was caused by a selective deposition. Coarse gravels in the fan were mobilized in humid periods but did not reach the lake-shore. The reason was a basement rock ridge situated parallel to the lake shore. Sands were delivered to the fan-delta in humid periods owing to frequent high-energy flows. A deposition of silts took place in dry periods. The studied fan-delta might preserve the sedimentary record of three humid periods from the last 200 years. However, further studies are needed to establish the timing of the fan-delta formation.     

Residence time of alluvium in an aggrading fluvial system

Relationships between the surface area and age of alluvial deposits were used to estimate the residence time of alluvium in the 2205 km² Waipaoa River basin, New Zealand. The contemporary Waipaoa River is an efficient transporter of sediment to the continental shelf, but the basin has been characterized by rapid channel and valley aggradation in the historic period, and by extensive mid‐ to late Holocene alluvial storage in the lower reaches. The area‐weighted mean age of alluvial deposits in the lower part of the river basin is ～4400 yr. These deposits comprise terrace remnants isolated by downcutting, and Holocene to Recent sediments that are potentially remobilizable by the modern river. Even though the amount of storage is small relative to downstream transport, the majority of the potentially remobilizable alluvium is likely to remain in storage for >100 yr, and its half‐life (time for 50 per cent removal) is >2000 yr. Within the confines of the flfloodplain, the apparent ‘loss’ of older deposits is due primarily to burial, but losses of the most recent deposits are due almost entirely to remobilization (30–40 per cent), with the remainder preserved in the alluvial record for at least 10⁴ yr. Most of this sediment is likely to remain in storage until there is a shift to a degradational state. Copyright © 2006 John Wiley & Sons, Ltd.     

Catchment lithology as a major control on alluvial megafan development,Kohrud Mountain range,central Iran

The relative importance of tectonics, climate, base level and source lithology as primary factors on alluvial‐fan evolution, fan morphology and sedimentary style remain in question. This study examines the role of catchment lithology on development and evolution of alluvial megafans (>30 km in length), along the flanks of the Kohrud Mountain range, NE Esfahan, central Iran. These fans toe out at axial basin river and playa‐fringe sediments towards the centre of basin and tectonics, climatic change and base‐level fluctuations, were consistent for their development. They formed in a tectonically active basin, under arid to semiarid climate and a long term (Plio‐Pleistocene to Recent) change from wetter to drier conditions. The key differences between two of these fans, Soh and Zefreh fans, along the west and south flanks of this mountain range, is that their catchments are underlain by dissimilar bedrock types. The source‐area lithologies of the Soh and Zefreh fans are in sedimentary and igneous terrains, respectively, and these fans developed their geometry mainly in response to different weathering intensities of their catchment bedrock lithologies. Fan surface mapping (based on 1/50000 topographic maps, satellite images, and fieldwork), reveals that the geomorphic evolution of these fans differs in that the relatively large‐scale incision and through trenching of the Soh fan is absent in the Zefreh fan. Whereas the limited sediment supply of the Soh fan has resulted in a deep incised channel, the Zefreh fan has remained aggradational with little or no trenching into proximal to medial fan surface due to its catchment bedrock geology, composed mainly by physically weathered volcaniclastic lithology and characterized by high sediment supply for delivery during episodic flash floods. Sediment supply, which is mainly a function of climate and source lithology, is a dominant driver behind the development of fan sequences in alluvial megafans. Copyright © 2012 John Wiley & Sons, Ltd.     

Sediment sequences and paleosols in the Kyichu Valley, southern Tibet (China), indicating Late Quaternary environmental changes

Abstract The Tibetan Plateau is highly sensitive to environmental changes and affects the settings of a far larger territory in Central Asia and beyond. Thus, knowledge on past environmental changes in that area is essential. Even though the Kyichu (Lhasa River) Valley and its tributaries is an easily accessible area, the Late Quaternary landscape evolution of southern Tibet is in general scarcely known. Therefore, 12 sedimentary sections in the middle and lower catchment were subjected to multidisciplinary analyses (sedimentology, paleopedology, AMS ¹⁴C and luminescence dating, and charcoal determination) aiming at results on regional paleoenvironmental changes. At the altitude studied (3600–4000 m above sealevel), no glacial relics could be detected, indicating that the valley positions have been unglaciated since the Last Interglacial. The lack of fluvial–lacustrine structures above the floodplain is due to the aggradational character of this tectonically (sub‐)active valley, which caused an alluvial burying of older valley bottoms. During the Late Pleistocene the mouth area of the Kyichu was occupied by a lake which was part of a larger dam‐lake in the superordinate Yarlung Zhangbo Valley. On the valley flanks, loesses were predominantly deposited before the Last Glacial Maximum (LGM), whereas eolian sands were predominantly deposited around and after the LGM. Paleosols of Last Interglacial, Last Glacial and Holocene ages regularly occur at terrestrial sites representing temperate to cool and humid to semiarid conditions during soil formation. Ages of colluvial sediments indicate that the widespread barren valley slopes were primarily formed by Late Pleistocene erosion followed by a secondary Holocene erosion phase. Charcoal spectra indicate a Late Holocene change from a forest environment to a pastoral environment with sparse grasses, herbs and dwarf shrubs. It is assumed that the Late Holocene environmental changes, such as loss of forests/woodlands and erosion, have at least been reinforced by humans, enhancing a regional climatic aridification and cooling trend.     

Sediment storage and transport in Pancho Rico Valley during and after the Pleistocene‐Holocene transition,Coast Ranges of central California (Monterey County)

Factors influencing sediment transport and storage within the 156·6 km² drainage basin of Pancho Rico Creek (PRC), and sediment transport from the PRC drainage basin to its c. 11 000 km² mainstem drainage (Salinas River) are investigated. Numeric age estimates are determined by optically stimulated luminescence (OSL) dating on quartz grains from three sediment samples collected from a ‘quaternary terrace a (Qta)’ PRC terrace/PRC‐tributary fan sequence, which consists dominantly of debris flow deposits overlying fluvial sediments. OSL dating results, morphometric analyses of topography, and field results indicate that the stormy climate of the Pleistocene‐Holocene transition caused intense debris‐flow erosion of PRC‐tributary valleys. However, during that time, the PRC channel was backfilled by Qta sediment, which indicates that there was insufficient discharge in PRC to transport the sediment load produced by tributary‐valley denudation. Locally, Salinas Valley alluvial stratigraphy lacks any record of hillslope erosion occurring during the Pleistocene‐Holocene transition, in that the alluvial fan formed where PRC enters the Salinas Valley lacks lobes correlative to Qta. This indicates that sediment stripped from PRC tributaries was mostly trapped in Pancho Rico Valley despite the relatively moist climate of the Pleistocene‐Holocene transition. Incision into Qta did not occur until PRC enlarged its drainage basin by c. 50% through capture of the upper part of San Lorenzo Creek, which occurred some time after the Pleistocene‐Holocene transition. During the relatively dry Holocene, PRC incision through Qta and into bedrock, as well as delivery of sediment to the San Ardo Fan, were facilitated by the discharge increase associated with stream‐capture. The influence of multiple mechanisms on sediment storage and transport in the Pancho Rico Valley‐Salinas Valley system exemplifies the complexity that (in some instances) must be recognized in order to correctly interpret terrestrial sedimentary sequences in tectonically active areas. Copyright © 2009 John Wiley & Sons, Ltd.     

Formation,mechanism and significance of alluvial-dammed lakes in Golmud River catchment,north-eastern Qinghai-Tibetan Plateau

This study investigated a series of dammed lakes and downstream-adjacent alluvial fans in the upstream to middle reaches of the Golmud River in the eastern Kunlun Mountain, on the north-eastern Qinghai-Tibetan Plateau (QTP). An optically stimulated luminescence (OSL) chronology shows the sediments of five dammed lakes developed from c. 45–40, 30–25, 18–14, and 12–8 ka, corresponding to MIS 3b, late MIS 3a, Last Deglaciation, and early Holocene, respectively. The remote sensing data show these dammed lakes have a total area of 109.4 km², with the lake volume of more than 4.0 km³. Symmetric alluvial fans from north–south tributary valleys produced OSL ages of c. 61–52, 42–31, 26–20, and 16–10 ka, corresponding to glaciation periods: the MIS 3c and MIS 3a, MIS 2, and the Last Deglaciation. This suggests that glacial activity is responsible for the alluvial fan development, where dammed rivers occurred first, but lake formation did not take place synchronously until later periods of strong hydrologic activity, resulting from northward intrusions of the Indian summer monsoon (ISM) or glacier melt. Thus, the blocking pattern is that river valleys were dammed during periods of glacial activity and lakes formed during wet periods. The lake formation and subsequent drainage may have resulted in: (i) impeded headwater incision and strengthening of downstream dissection; (ii) enriched the halite and potash in the distal Qarhan Salt Lake through hydrologic and hydrochemical processes of abundant water input, the salt lake expansion, salt redissolution from playa and final resedimentation during later dry periods. The alluvial-dammed lake pattern in the mountain-basin systems of eastern Kunlun Mountain offers a model for assessing the linkages between monsoon dynamics, geomorphic processes and distal salt lake evolutions in other arid regions.     

Tilting neotectonics of the Guadiamar drainage basin,SW Spain

The Guadiamar river ?ows from the southern Iberian Massif to the Guadalquivir foreland basin, SW Spain. Its drainage basin displays asymmetries in the stream network, the arrangement of alluvial terraces and the con?guration of the trunk river valley. The stream network asymmetry was studied using morphometric measures of transverse topographic sym‐metry, asymmetry factor and drainage basin shape. The alluvial terraces were studied through the lithologic logs of more than a hundred boreholes and ?eld mapping. The morphometric methods demonstrate a regional tectonic tilting toward the SSE, causing both the migration of the Guadiamar river toward the east and the migration of the Guadiamar tributaries toward the southwest. As a consequence of the Guadiamar river migration, an asymmetric valley developed, with a steep eastern margin caused by river dissection, and a gentle western margin where the main alluvial deposits are found. The ages obtained using the ¹⁴C analysis of samples from several alluvial deposits show that the river migration, and thus tilting, has occurred during the Holocene as well as earlier in the Quaternary. This interpretation revises the Guadiamar longitudinal fault assumed by previous studies. Copyright © 2003 John Wiley & Sons, Ltd.     

Holocene alluvial fan and terrace formation in the Bowland Fells,Northwest England

In the Bowland Fells, Lancashire, northwest England, in the headwater valleys of the Hodder river system, is a suite of Holocene fluvial landforms. Debris cones and alluvial fans at tributary junctions, and river terraces along the main valleys post-date late Pleistocene forms and pre-date the modern valley floor alluvial forms. Eight ¹⁴C dates from wood samples incorporated within the terrace and fan deposits have allowed two main phases of Holocene erosion to be identified with debris cone/fan deposition taking place after c. 5400 BP but before c. 1900 BP and again at c. 900 BP. Some of the fans and cones are complex with deposits attributable to both phases; others are simple and attributable only to the later phase. In the headwaters an upper terrace at c. 5400 BP pre-dates the cones and a lower terrace is contemporaneous with the first debris cone phase. Lower downvalley the youngest of three terraces date from c. 5000 BP or earlier indicating that the sequence is less complex downstream.     

Hydrometeorological controls and erosive response of an extreme alpine debris flow

On 29 August, 2003, an intense convective storm system affected the Fella River basin, in the eastern Italian Alps, producing rainfall peaks of approximately 390 mm in 12 h. The storm triggered an unusually large debris flow in the ungauged Rio Cucco basin (0·65 km²), with a volume of approximately 78 000 m³. The analysis of the time evolution of the rainstorm over the basin has been based on rainfall estimates from radar observations and data recorded by a raingauge network. Detailed geomorphological field surveys, carried out both before and after the flood of August 2003, and the application of a distributed hydrological model have enabled assessment of flood response, estimation of erosion volumes and sediment supply to the channel network. The accounts of two eyewitnesses have provided useful elements for reconstructing the time evolution and the flow processes involved in the event. Liquid peak discharge estimates cluster around 20 m³ s^?1 km^?2, placing this event on the flood envelope curve for the eastern Italian Alps. The hydrological analysis has shown that the major controls of the flood response were the exceptional cumulated rainfall amount, required to exceed the large initial losses, and the large rainfall intensities at hourly temporal scales, required to generate high flood response at the considered basin scale. Observations on the deposits accumulated on the alluvial fan indicate that, although the dominant flow process was a debris flow, sheetflood also contributed to fan aggradation and fluvial reworking had an important role in winnowing debris‐flow lobes and redistributing sediment on the fan surface. This points out to the large discharge values during the recession phase of the flood, implying an important role for subsurface flow on runoff generation of this extreme flash flood event. Copyright © 2009 John Wiley & Sons, Ltd.     

Dating of post-glacial landforms in the central howgills

Little is known of Holocene landform development in Upland Britain. This paper describes a site at Middle Langdale in the Howgill Fells of Cumbria where large, but now stabilized and inactive gullies cut through periglacial material. At the base of the gullies large debris cones have buried earlier alluvial sediments on the valley floor. On these sediments and buried by the debris cones is a well-developed organic soil from which two ¹⁴C dates have been obtained in an attempt to estimate the age range of the soil. These dates range from 2580±55 years BP for the fine particulate fraction from the base of the organic horizon to 940±95 years BP for fossil rootlets from the uppermost organic layer, immediately below the overlying debris cones. The pollen evidence suggests that the valley floor site was initially dominated by alder carr and later by a Juncus marsh with birch, alder and hazel nearby. The pollen, from the surrounding upland area suggests woodland on the valley sides, dominated by oak and elm that was later replaced by a more open environment rich in heath species and in which disturbed ground species were present. The magnetic evidence indicates a stable local environment during soil formation but shows a sudden inwash of unweathered debris at the top of the buried soil. The evidence suggests that the valley floor was geomorphologically stable throughout the period of soil formation, although there was a local change in valley floor vegetation and a reduction of woodland cover on the valley sides at sometime during the period. The evidence then points to major geomorphological changes; a wave of soil erosion, gully development and debris cone deposition, perhaps following the Scandinavian introduction of sheep farming in the tenth century A.D.     

Postglacial sediment budget of Chilliwack Valley,British Columbia

The paraglacial reworking of glacial sediments by rivers and mass wasting is an important conditioning factor for modern sediment yields in mountainous catchments in formerly glaciated regions. Catchment scale and patterns of sediment storage are important influences in the rate of postglacial adjustment. We develop a quantitative framework to estimate the volume, sediment type, and fractional size distribution of legacy glacial materials in a large (1230 km²) watershed in the North Cascade Mountains in south‐western British Columbia, Canada. Chilliwack Valley is exceptional because of the well‐dated bounds of deglaciation. Interpolation of paleo‐surfaces from partially eroded deposits in the valley allows us to estimate the total evacuated sediment volume. We present a chronology of sediment evacuation from the valley and deposition in the outlet fan, based on infrared stimulated luminescence (IRSL) and ¹⁴ C dating of river terraces and fan strata, respectively. The effects of paraglacial sedimentation in Chilliwack Valley were intensified through a major fall in valley base‐level following ice retreat. The steepened mainstem valley gradient led to deep incision of valley fills and fan deposits in the lower valley network. The results of this integrated study provide a postglacial chronology and detailed sediment budget, accounting for long‐term sorting of the original sediments, lag deposit formation in the mainstem, deposition in the outlet fan, and approximate downstream losses of suspended sediment and wash load. The mass balance indicates that a bulk volume of approximately 3.2 km³ of glacial material has been evacuated from the valley. Copyright © 2012 John Wiley & Sons, Ltd.     

Modern sediment yield compared to geologic rates of sediment production in a semi‐arid basin,New Mexico: assessing the human impact

An Erratum has been published for this article in Earth Surface Processes and Landforms 29(13) 2004, 1707. In the semi‐arid Arroyo Chavez basin of New Mexico, a 2·28 km² sub‐basin of the Rio Puerco, we contrasted short‐term rates (3 years) of sediment yield measured with sediment traps and dams with long‐term, geologic rates (～10 000 years) of sediment production measured using ¹⁰Be. Examination of erosion rates at different time‐scales provides the opportunity to contrast the human impact on erosion with background or geologic rates of sediment production. Arroyo Chavez is grazed and we were interested in whether differences in erosion rates observed at the two time‐scales are due to grazing. The geologic rate of sediment production, 0·27 kg m^?2 a^?1 is similar to the modern sediment yields measured for geomorphic surfaces including colluvial slopes, gently sloping hillslopes, and the mesa top which ranged from 0·12 to 1·03 kg m^?2 a^?1. The differences between modern sediment yield and geologic rates of sediment production were most noticeable for the alluvial valley ?oor, which had modern sediment yields as high as 3·35 kg m^?2 a^?1. The hydraulic state of the arroyo determines whether the alluvial valley ?oor is aggrading or degrading. Arroyo Chavez is incised and the alluvial valley ?oor is gullied and piped and is a source of sediment. The alluvial valley ?oor is also the portion of the basin most modi?ed by human disturbance including grazing and gas pipeline activity, both of which serve to increase erosion rates. Copyright © 2004 John Wiley & Sons, Ltd.     

SEDIMENTARY EVOLUTION STUDY ON THE GANYANCHI PULL-APART BASIN ALONG THE HAIYUAN FAULT

Ganyanchi (Salt Lake)basin, located in the central part of the Haiyuan Fault, northeastern corner of the Tibetan plateau, is the largest pull-apart basin along this fault. Due to its location in northeastern Tibet, the Ganyanchi Basin preserves an important sedimentary record of tectonism and climate change associated with progressive growth of the Tibetan plateau. The sediments of this basin also contain abundant information regarding the deformational history of the bounding strike-slip fault, i.e., the Haiyuan Fault. Therefore, a detailed study on the depository history of the Ganyanchi Basin is of great importance. Earlier studies only focused on regional geological mapping and paleoseismic research, however, no sedimentologic or chronological work has been done in the Ganyanchi pull-apart basin. To address this problem, we drilled a 328m-deep borehole, named HY-C8, at the south of the cross-basin fault and near the active depocenter, and employ magnetostratigraphic analyses and seismic reflection data to constrain the age and to deduce the evolving history of the basin. The deep borehole profile shows that the stratigraphy of the basin can be divided into three main units (Unit Ⅰ, Ⅱ and Ⅲ), which began to deposit at about 2.76, 2.33 and 1.78Ma, respectively. The grain size of the deposits manifests an upward thinning trend, which probably implies the profile is a characteristic retrogradational sequence. The magnetic susceptibility results indicate that the playa lake probably was formed at about 1.78Ma ago, the corresponding playa-lake deposits recorded more than eight high susceptibility sections, which are most likely due to the iron sulfides (such as melnikovite, pyrrhotine etc.)that were usually produced in high-lake-level and reduction conditions. A combination of boreholes and shallow seismic reflection data indicates that the Ganyanchi Basin is mainly controlled by the cross-basin fault and its northern boundary fault, and the depocenter, probably deeper than 550m, lies in between these two faults. Finally, the sedimentary facies of the Ganyanchi Basin experienced a four-stage evolving history:eluvial facies (before~2.76Ma)to alluvial fan facies (about 2.76~2.33Ma)to distal alluvial fan facies (2.33~1.78Ma)to playa lake facies (1.78Ma~present). Based on accumulation rates, the stage of playa lake can be divided into two subchrons, and the depositional rates of subchrons 2 (about 0.78Ma~present)is as high as 232.5m/Ma, which probably was caused by the activity along the cross-basin fault in the Ganyanchi Basin.     

Geomorphological evolution and sediment stratigraphy of numerically simulated alluvial fans

When a sediment laden river reaches a flat basin area the coarse fraction of their sediment load is deposited in a cone shaped structure called an alluvial fan. In this article we used the State Space Soil Production and Assessment Model (SSSPAM) coupled landform–soilscape evolution model to simulate the development of alluvial fans in two- and three-dimensional landforms. In SSSPAM the physical processes of erosion and armouring, soil weathering and sediment deposition were modelled using state-space matrices, in both two and three dimensions. The results of the two-dimensional fan showed that the fan grew vertically and laterally keeping a concave up long profile. It also showed a downstream fining of the sediments along the fan profile. Both of these observations are in agreement with available literature concerning natural and experimental fan formations. Simulations with the three-dimensional landform produced a fan with a semicircular shape with concave up long profiles and concave down cross profiles which is typical for fans found in nature and ones developed in laboratory conditions. During the simulation the main channel which brings sediment to the fan structure changed its position constantly leading to the semicircular shape of the fan. This behaviour is similar to the autogenic process of ‘fanhead trenching’ which is the major mechanism of sediment redistribution while the fan is developing. The three-dimensional fan simulation also exhibited the downstream fining of sediments from the fan apex to the peripheries. Further, the simulated fan also developed complex internal sediment stratification which is modelled by SSSPAM. Currently such complex sediment stratification is thought to be a result of allogenic processes. However, this simulation shows that, such complex internal sediment structures can develop through autogenic processes as well. © 2020 John Wiley & Sons, Ltd.     

Modelling alluvial fan morphology

A mathematical model which estimates the scale-independent sediment surface profile of alluvial fans has been developed. This model utilizes a diffusive sediment transport model and an unsteady, radial flow, conservation relationship. These equations are approximately solved assuming a quasi-steady-state closure with appropriate modelling assumptions for two end member fan types: (1) fans where most of the fan surface is depositionally active (denoted here as ‘homogeneous’) and (2) fans characterized by channelling and sediment sorting processes. The fundamental result for these two fan types is a dimensionless sediment profile relationship which approximates most fan surfaces. The model suggests that the overall dimensionless morphology of alluvial fans is governed more by fundamental diffusion principles in sediment deposition than by individual environmental or basin characteristics. Additionally, this work potentially can be extended to model temporal variation in fan development. Preliminary comparison with alluvial fan profiles is reasonable, indicating that this model provides useful qualitative and quantitative information relating to alluvial fan process and morphology. Copyright © 1999 John Wiley & Sons, Ltd.     

Tectonic uplift and sedimentary evolution of the Jiuxi Basin in the northern margin of the Tibetan Plateau since 13 Ma BP

Sediments shed from the northern margin of the Tibetan Plateau, the Qilian Mountains, are widely deposited in the foreland basin, the Jiuxi Basin, archiving plenty of information about the mountain surface uplift and erosion history. The Laojunmiao section, 1960 m thick, representing the upper sequence of the Cenozoic basin sediments, is paleomagnetically dated to about 13-0 Ma BP. Detailed sedimentary study of this sequence has revealed five sedimentary facies associations which determine four stages of sedimentary environment evolution. They are: (I) the half-deep lake system before 12.18 Ma BP, (II) the shallow lake system between 12.18 and 8.26 Ma BP, (III) the fan delta dominated sedimentary system in dry climate between 8.26 and 6.57 Ma BP, and (IV) alluvial fan system since 6.57 Ma BP. The associated mountain erosion and uplift are suggested to have experienced three phases, that is, tectonic stable (13-8.26 Ma BP), gradual uplift (8.26-<4.96 Ma BP), and rapid intermittent uplift (>3.66-0 Ma BP). The uplift at ∼3.66 Ma BP is of great importance in tectonics and geomorphology. Since then, tectonic uplift and mountain building have been accelerated and become strong intermittent. At least three significant tectonic events took place with ages at <1.80-1.23, 0.93-0.84 and 0.14 Ma BP, respectively. Thus, the uplift of the northern Tibetan Plateau is a complex process of multiple phases, unequal speed and irregular movements.

     

Relevant features of the valley seismic response: the case study of Tuscan Northern Apennine sector

The so called “valley effect” relates to the typical seismic response of basin shaped bedrock filled by quaternary sediments. It is an aspect of the renown “local seismic effect” that shall be taken into account when dealing with microzoning studies. Several experimental surveys and numerical simulations performed worldwide over the last 40 years, confirmed that valley responses under seismic excitations show common features in various geological contexts as far as the sedimentary valleys (e.g. alluvial and lacustrine plains), the intermountain valleys (e.g. alpine valleys) and graben shaped basins. Such features mainly depend on the basin geometry, referred to as the shape ratio SR, and the sediment and basin impedance contrast IC. Although researchers agree on the prominent role of local seismic effects for interpreting erratic damages caused by seismic shaking in urbanized areas, no fully shared strategies have been identified for taking into account valley effect within microzoning studies. In this paper, a numerical simulations on three models of trapezoidal shaped basins have been performed. These valley models relate to sediments and basins detected within the Tuscany Region territory during the VEL project. Results, in terms of the amplification index $\text{ F }_{\mathrm{A}}$ F A have been provided. Three “valley effect charts” for various SR and IC values have been propose for taking into account the local seismic effects due to the basin amplifications within microzoning maps.     

Dynamics of phosphorus in sediments of a naturally acidic lake

The mechanisms which controls the fixation and/or release of P in sediment of an extremely acidic lake（pH = 2.0 to 3.0） and its response to the influence of eutrophic urban waste water were investigated.The results,in the chemical composition,in the mineralogy of the sediment and in the material as obtained from sediment traps,show that the lake sediments are mainly volcanic material reflecting volcanic features of the basin.The sedimentation rate calculated for the lake(2.5×10^-2 mg m^-2 day^-1) was higher than that observed in other similar glacial lakes in both Andean Patagonia and also elsewhere in the world.The Total Phosphorus concentration in sediments was higher than figures reported by other authors for mining acid lakes,and the main fraction of P was found associated with organic matter.There was no control by Fe or Al on P,because both are in solution at pH < 3.0.It was concluded that changes in the natural input of nutrients（derivatives of Copahue volcano fluid,the discharge of sewage,or basin run-off） are responsible for a high concentration of SRP and N-NH₄⁺ in the lake.Laboratory experiments showed that sediments have no ability to retain phosphorus and a continuous release of P from the sediments into the water column was observed.The assays where the pH was artificially increased showed that the P still remains in solution until at least pH 7.0.It was concluded that changes in the natural input of nutrients due to:1) the volcanic fluids,2) the increase in sewage charges,or 3) surface runoff upstream,maintain a high trophic state with high concentrations of dissolved P and N-NH₄⁺,although the threshold of neutral pH in the lake is exceeded.This study will enable a better understanding about of the mechanism of release/fixation of phosphorus in acidic sediments in order to assist in making decisions regarding the conservation and management of this natural environment.     

Strike–slip origin of Cretaceous Mazhan Basin, Tan-Lu Fault Zone, Shandong, east China

The Mazhan Basin, Shandong Province, China, is located between the main faults, F₃ and F₄, of the Tan-Lu Fault Zone. It is an elongated basin more than 60 km in length and 8 km in width and contains a series of typical continental sediments (the Upper Cretaceous Wangshi Group). This series was divided into three sedimentary facies associations: conglomerate facies association; sandstone facies association of alluvial fan to lake margin environment; and siltstone facies association of lacustrine origins. Their zonal distribution pattern may represent a contemporaneous heterotopic facies due to a lateral facies change from margins to axis of the basin. Their stratigraphic sequence becomes younger northward along the boundary faults. This suggests that the depocenter of the fan–lake system tends to migrate northward along F₃. From the asymmetric features (i.e. basin shape, lithofacies distribution, facies change) the Mazhan Basin can be explained by progressive subsidence at the Tangwu releasing bend of F₃ with sinistral strike–slip movement. Judging from the fission track (FT) ages from the Wangshi Group, it was concluded that a sinistral strike–slip movement along the main fault, F₃ of the Tan-Lu Fault in Shandong, has lasted until the Late Cretaceous. Its displacement is estimated to be larger than the migrated distance, 60 km, of the depocenter of the Mazhan Basin.