The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures

The primary purpose of this research is to improve the seismic response of a complex asymmetric tall structure using viscoelastic(VE) dampers. Asymmetric structures have detrimental effects on the seismic performance because such structures create abrupt changes in the stiffness or strength that may lead to undesirable stress concentrations at weak locations. Structural control devices are one of the effective ways to reduce seismic impacts, particularly in asymmetric structures. For passive vibration control of structures, VE dampers are considered among the most preferred devices for energy dissipation. Therefore, in this research, VE dampers are implemented at strategic locations in a realistic case study structure to increase the level of distributed damping without occupying significant architectural space and reducing earthquake vibrations in terms of story displacements(drifts) and other design forces. It has been concluded that the seismic response of the considered structure retrofitted with supplemental VE dampers corresponded well in controlling the displacement demands. Moreover, it has been demonstrated that seismic response in terms of interstory drifts was effectively mitigated with supplemental damping when added up to a certain level. Exceeding the supplemental damping from this level did not contribute to additional mitigation of the seismic response of the considered structure. In addition, it was found that the supplemental damping increased the total acceleration of the considered structure at all floor levels, which indicates that for irregular tall structures of this type, VE dampers were only a good retrofitting measure for earthquake induced interstory deformations and their use may not be suitable for acceleration sensitive structures. Overall, the research findings demonstrate how seismic hazards to these types of structures can be reduced by introducing additional damping into the structure.     

Optimal design of viscoelastic dampers using eigenvalue assignment

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic response of steel frame structures with added viscoelastic dampers

The feasibility of using viscoelastic (VE) dampers to mitigate earthquake-induced structural response is studied in this paper. The properties of VE dampers are briefly described. A procedure for evaluating the VE damping effect when added to a structure is proposed in which the damping effect of VE dampers is incorporated into modal damping ratios through an energy approach. Computer simulation of the damped response of a multi-storey steel frame structure shows significant reduction in floor displacement levels.     

Stochastic seismic response of structures with added viscoelastic dampers modeled by fractional derivative

Viscoelastic dampers, as supplementary energy dissipation devices, have been used in building structures under seismic excitation or wind loads. Different analytical models have been proposed to describe their dynamic force deformation characteristics. Among these analytical models, the fractional derivative models have attracted more attention as they can capture the frequency dependence of the material stiffness and damping properties observed from tests very well. In this paper, a Fourier-transform-based technique is presented to obtain the fractional unit impulse function and the response of structures with added viscoelastic dampers whose force-deformation relationship is described by a fractional derivative model. Then, a Duhamel integral-type expression is suggested for the response analysis of a fractional damped dynamic system subjected to deterministic or random excitation. Through numerical verification, it is shown that viscoelastic dampers are effective in reducing structural responses over a wide frequency range, and the proposed schemes can be used to accurately predict the stochastic seismic response of structures with added viscoelastic dampers described by a Kelvin model with fractional derivative.     

Simplified design procedure for frame buildings with viscoelastic or elastomeric structural dampers

A simplified design procedure (SDP) for preliminary seismic design of frame buildings with structural dampers is presented. The SDP uses elastic‐static analysis and is applicable to structural dampers made from viscoelastic (VE) or high‐damping elastomeric materials. The behaviour of typical VE materials and high‐damping elastomeric materials is often non‐linear, and the SDP idealizes these materials as linear VE materials. With this idealization, structures with VE or high‐damping elastomeric dampers can be designed and analysed using methods based on linear VE theory. As an example, a retrofit design for a typical non‐ductile reinforced concrete (RC) frame building using high‐damping elastomeric dampers is developed using the SDP. To validate the SDP, results from non‐linear dynamic time history analyses (NDTHA) are presented. Results from NDTHA demonstrate that the SDP estimates the seismic response with sufficient accuracy for design. It is shown that a non‐ductile RC frame building can be retrofit with high‐damping elastomeric dampers to remain essentially elastic under the design basis earthquake (DBE). Copyright © 2005 John Wiley & Sons, Ltd.     

Seismic analysis of structures with a fractional derivative model of viscoelastic dampers

Viscoelastic dampers are now among some of the preferred energy dissipation devices used for passive seismic response control. To evaluate the performance of structures installed with viscoelastic dampers, different analytical models have been used to characterize their dynamic force deformation characteristics. The fractional derivative models have received favorable attention as they can capture the frequency dependence of the material stiffness and damping properties observed in the tests very well. However, accurate analytical procedures are needed to calculate the response of structures with such damper models. This paper presents a modal analysis approach, similar to that used for the analysis of linear systems, for solving the equations of motion with fractional derivative terms for arbitrary forcing functions such as those caused by earthquake induced ground motions. The uncoupled modal equations still have fractional derivatives, but can be solved by numerical or analytical procedures. Both numerical and analytical procedures are formulated. These procedures are then used to calculate the dynamic response of a multi-degree of freedom shear beam structure excited by ground motions. Numerical results demonstrating the response reducing effect of viscoelastic dampers are also presented.     

Hybrid structural control using viscoelastic dampers and active control systems

Viscoelastic (VE) dampers and active control (AC) systems are studied together as a hybrid system for their effectiveness in reducing the response of seismic structures. VE dampers have properties which are both frequency and temperature-dependent. On the other hand, AC systems for seismic structures require rather large control forces in order to be effective. The possibility of combining VE dampers and AC systems to improve the performance of both systems is examined. It is found that for the same response reduction, the addition of VE dampers to an AC system reduces the required control forces considerably, which reduces the cost of the AC system. The addition of the AC system helps improve the velocity performance of VE dampers and considerably reduces the possibility of shear failure of the viscoelastic material. Two procedures for evaluating the damping effect of the VE dampers are suggested which can be applied to either shear-type or framed structures. Two control algorithms based on drift and velocity/acceleration feedback are compared to existing algorithms. A method of determining the weighting matrices of an AC system is presented which reduces the required control forces for certain control algorithms.     

基于高阻尼纳米复合材料的直角型黏弹性阻尼器的数值模拟

为提高装配式钢结构梁柱节点的抗震性能,首先通过熔融共混法制备高阻尼性能纳米偏高岭土/氟橡胶(NanoGmetakaolin/Fluororubber,NMK/FKM)复合材料,并对该新型材料进行4种频率下的动态力学性能试验和静态力学试验,然后以 NMK/FKM 纳米复合材料为核心耗能材料,对所提出的直角型黏弹性阻尼器进行 ABAQUS有限元模拟分析.研究结果表明:当频率为1．5Hz 时,NMK/FKM 纳米复合材料宽阻尼温域和 TA 值皆达到峰值,该工况下材料的阻尼性能最佳;直角型黏弹性阻尼器表现出刚度随位移幅值的增大而增大的动力特性;当频率为0．5、1．0和1．5Hz 时,阻尼器滞回特性表现出非线性特征,当频率升至2．0Hz时,滞回特性则为线性.随着黏弹性材料层厚度的增大,滞回环面积、阻尼器刚度和最大阻尼力逐渐减小;随着高跨比的增大,阻尼器耗能性能提升.通过调整阻尼器的高跨比和阻尼材料层厚度,可以进一步提高直角型阻尼器的动态响应.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Dynamic characteristics and seismic response of adjacent buildings linked by discrete dampers

Coupling adjacent buildings using discrete viscoelastic dampers for control of response to low and moderate seismic events is investigated in this paper. The complex modal superposition method is first used to determine dynamic characteristics, mainly modal damping ratio and modal frequency, of damper-linked linear adjacent buildings for practical use. Random seismic response of linear adjacent buildings linked by dampers is then determined by a combination of the complex modal superposition method and the pseudo-excitation method. This combined method can effectively and accurately determine random seismic response of non-classically damped systems in the frequency domain. Parametric studies are finally performed to identify optimal parameters of viscoelastic dampers for achieving the maximum modal damping ratio or the maximum response reduction of adjacent buildings. It is demonstrated that using discrete viscoelastic dampers of proper parameters to link adjacent buildings can reduce random seismic responses significantly. Copyright © 1999 John Wiley & Sons Ltd.     

Modeling viscous damping in nonlinear response history analysis of buildings for earthquake excitation

The Rayleigh damping model, which is pervasive in nonlinear response history analysis (RHA) of buildings, is shown to develop ‘spurious’ damping forces and lead to inaccurate response results. We prove that a viscous damping matrix constructed by superposition of modal damping matrices—irrespective of the number of modes included or values assigned to modal damping ratios—completely eliminates the ‘spurious’ damping forces. This is the damping model recommended for nonlinear RHA. Replacing the stiffness‐proportional part of Rayleigh damping by the tangent stiffness matrix is shown to improve response results. However, this model is not recommended because it lacks a physical basis and has conceptual implications that are troubling: hysteresis in damping force–velocity relationship and negative damping at large displacements. Furthermore, the model conflicts with the constant‐damping model that has been the basis for fundamental concepts and accumulated experience about the inelastic response of structures. With a distributed plasticity model, the structural response is not sensitive to the damping model; even the Rayleigh damping model leads to acceptable results. This perspective on damping provides yet another reason to employ the superior distributed plasticity models in nonlinear RHA. OpenSees software has been extended to include a damping matrix defined as the superposition of modal damping matrices. Although this model leads to a full populated damping matrix, the additional computational demands are demonstrated to be minimal. Copyright © 2015 John Wiley & Sons, Ltd.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 1: normal modes

Based on the Hilbert–Huang spectral analysis, a method is proposed to identify multi‐degree‐of‐freedom (MDOF) linear systems using measured free vibration time histories. For MDOF systems, the normal modes have been assumed to exist. In this method, the measured response data, which are polluted by noises, are first decomposed into modal responses using the empirical mode decomposition (EMD) approach with intermittency criteria. Then, the Hilbert transform is applied to each modal response to obtain the instantaneous amplitude and phase angle time histories. A linear least‐square fit procedure is proposed to identify the natural frequency and damping ratio from the instantaneous amplitude and phase angle for each modal response. Based on a single measurement of the free vibration time history at one appropriate location, natural frequencies and damping ratios can be identified. When the responses at all degrees of freedom are measured, the mode shapes and the physical mass, damping and stiffness matrices of the structure can be determined. The applications of the proposed method are illustrated using three linear systems with different dynamic characteristics. Numerical simulation results demonstrate that the proposed system identification method yields quite accurate results, and it offers a new and effective tool for the system identification of linear structures in which normal modes exist. Copyright © 2003 John Wiley & Sons, Ltd.     

耗能减振结构的抗震设计方法

本文基于国内外耗能减振装置的性能试验和耗能减振结构的计算研究并结合我国正在修订的建筑结构抗震规范。提出了耗能减震结构抗震设计的统一方法。首先,提出了速度相关型线性耗能器和滞变型耗能器等效阻尼和刚度的计算方法;其次,通过大量的计算比较,研究了耗能减振结构非交阻尼阵强行解耦的精度和实际应用的可行性,提出了在结构地震反应分析了振型分解反应谱法中耗能器可统一归结为结构附加振型阻尼比的方法;第三,通过耗能减     

Higher-mode effect on the seismic responses of buildings with viscoelastic dampers

In conventional modal analysis procedures, usually only a few dominant modes are required to describe the dynamic behavior of multi-degrees-of-freedom buildings. The number of modes needed in the dynamic analysis depends on the higher-mode contribution to the structural response, which is called the higher-mode effect. The modal analysis approach, however, may not be directly applied to the dynamic analysis of viscoelastically damped buildings. This is because the dynamic properties of the viscoelastic dampers depend on their vibration frequency. Therefore, the structural stiffness and damping contributed from those dampers would be different for each mode. In this study, the higher-mode effect is referred to as the response difference induced by the frequency-dependent property of viscoelastic dampers at higher modes. Modal analysis procedures for buildings with viscoelastic dampers distributed proportionally and non-proportionally to the stiffness of the buildings are developed to consider the higher-mode effect. Numerical studies on shear-type viscoelastically damped building models are conducted to examine the accuracy of the proposed procedures and to investigate the significance of the higher-mode effect on their seismic response. Two damper models are used to estimate the peak damper forces in the proposed procedures. Study results reveal that the higher-mode effect is significant for long-period viscoelastically damped buildings. The higher-mode effect on base shear is less significant than on story acceleration response. Maximum difference of the seismic response usually occurs at the top story. Also, the higher-mode effect may not be reduced by decreasing the damping ratio provided by the viscoelastic dampers. For practical application, it is realized that the linear viscous damping model without considering the higher-mode effect may predict larger damper forces and hence, is on the conservative side. Supported by: Science Council, Chinese Taipei, grant no. 88-2625-2-002-006     

A design procedure for buildings equipped with energy dissipation devices using nonclassical damping and iso-performance curves

This article describes a design procedure for elastic buildings equipped with linear and nonlinear energy dissipating devices. The objective is to achieve a design that responds to a target building performance following a simple and robust step-by-step algorithm. The proposed procedure identifies first the modal significance of key design performance indicators and controls the modal properties by solving a singular two-parameter eigenvalue problem. For that purpose, a new modal significance metric is proposed, and a target frequency shift and damping ratio for the complete structure are obtained from the so-called iso-performance design curves. The design algorithm employs linear-equivalent stiffness and damping properties, which are then transformed into parameters characterizing inelastic force-deformation constitutive models corresponding to physical devices. The design algorithm leads to an optimal damper distribution corresponding to the minimum global amount of supplemental equivalent damping needed to achieve a maximum modal perturbation. The design procedure is first demonstrated using a five-story building example and then a real and complex 22-story free-plan building with two towers of rhomboid-shape plan with a very singular dynamic behavior.     

复合夹层结构频率及损耗因子的计算

频率和损耗因子是粘弹性材料复合夹层结构的两个重要的动力特性指标。本文采用复模量模型模拟夹层粘弹性材料特性的频率相关性,并基于大型通用有限元程序NASTRAN,提出采用模态应变能迭代法及复特征值迭代法求解复合夹层结构的各阶频率及损耗因子。该方法可以应用到大型复杂复合夹层结构中去,具有很好的实用性和较好的准确性。以复合夹层梁为例,进行了理论解析解和数值解的对比研究和优化设计分析。     

Errors in response calculations for non-classically damped structures

The classical normal mode method of determining response is extremely useful for practical calculations, but depends upon the damping matrix being orthogonal with respect to the modal vectors. Approximations that allow the method to be used when this condition is not satisfied have been suggested; the simplest approach is to neglect off-diagonal terms in the triple matrix product formed from the damping and modal matrices. In this paper the errors in response caused by this approximation are determined for several simple structures for a wide range of damping parameters and different types of excitation. Based on these results a criterion, relating modal damping and natural frequencies, is formulated; if this is satisfied, the errors in response caused by this diagonalization procedure are within acceptable limits.     

On the accuracy of simplified methods for the analysis of isolated bridges

To foster the use of seismic isolation in structures, existing guidelines strive to formulate design methods which are simple and accessible to non‐specialized engineers. On the other hand, not all of the simplifying provisions adopted by the norms can be said to have been adequately tested to provide a consistent level of accuracy. The study attempts, in particular, to elucidate three aspects related to the methods of analysis for linear or linearized isolated bridges on which little or no advice can be found in the norms. The first one is about the way one has to account for the fact that damping matrices of isolated bridges are never of proportional type. The present study demonstrates, through a number of typical applications, that classical modal analysis, using real modes and the diagonal terms of the modal damping matrices, still provide a fully acceptable approximation. The second and third aspects are related to the use of linearization expressions extended to the analysis of hyperstatic bridges. Parametric analyses conducted in the study show that none of the formulas in current use gives satisfactory results for both the displacement and the force responses, a requirement for a reliable design of an isolated bridge. How to use the equivalent linear parameters, and in particular the isolators equivalent damping ratios, in the context of a modal analysis, is treated next. This problem is seldom if ever mentioned in the norms where at most a formula is given for constructing modal damping ratios based on the damping ratios of the isolators. A rational, approximate procedure is discussed in this paper, applicable to all types of structures with non‐proportional damping, which in the case of bridges can be shown to reduce to the expression provided in the Japanese bridge design guidelines. Copyright © 2001 John Wiley & Sons, Ltd.     

Appropriate viscous damping for nonlinear time‐history analysis of base‐isolated reinforced concrete buildings

There is no consensus at the present time regarding an appropriate approach to model viscous damping in nonlinear time‐history analysis of base‐isolated buildings because of uncertainties associated with quantification of energy dissipation. Therefore, in this study, the effects of modeling viscous damping on the response of base‐isolated reinforced concrete buildings subjected to earthquake ground motions are investigated. The test results of a reduced‐scale three‐story building previously tested on a shaking table are compared with three‐dimensional finite element simulation results. The study is primarily focused on nonlinear direct‐integration time‐history analysis, where many different approaches of modeling viscous damping, developed within the framework of Rayleigh damping are considered. Nonlinear direct‐integration time‐history analysis results reveal that the damping ratio as well as the approach used to model damping has significant effects on the response, and quite importantly, a damping ratio of 1% is more appropriate in simulating the response than a damping ratio of 5%. It is shown that stiffness‐proportional damping, where the coefficient multiplying the stiffness matrix is calculated from the frequency of the base‐isolated building with the post‐elastic stiffness of the isolation system, provides reasonable estimates of the peak response indicators, in addition to being able to capture the frequency content of the response very well. Furthermore, nonlinear modal time‐history analyses using constant as well as frequency‐dependent modal damping are also performed for comparison purposes. It was found that for nonlinear modal time‐history analysis, frequency‐dependent damping, where zero damping is assigned to the frequencies below the fundamental frequency of the superstructure for a fixed‐base condition and 5% damping is assigned to all other frequencies, is more appropriate, than 5% constant damping. Copyright © 2013 John Wiley & Sons, Ltd.     

Numerical artifacts associated with Rayleigh and modal damping models of inelastic structures with massless coordinates

The paper presents a detailed reexamination of the effects of three damping models on the inelastic seismic response of structures with massless degrees of freedom. The models considered correspond to (a) Rayleigh damping based on current properties (tangent stiffness), (b) Rayleigh damping based on initial properties, and (c) modal damping. The results suggest that some nonzero damping forces/moments at massless DOFs obtained in multistory frames for the case of Rayleigh damping with tangent stiffness may be numerical artifacts rather than a deficiency of the damping model. The results also indicate that significant artificial numerical oscillations in the velocities of the secondary components of MDOF structures are introduced when modal damping or mass-proportional damping is used.