基于共轭梯度算法的重力梯度数据三维聚焦反演研究

重力梯度数据相对于传统重力数据,能够更细致、准确地描述地球浅部构造和研究矿产资源分布等信息.本文采用共轭梯度算法,在加权密度域求解重力梯度数据三维聚焦反演最优化问题,以恢复地下三维密度分布,目标函数包括数据不拟合函数和最小支撑稳定函数.首先,在推导目标函数对加权密度的一阶导数时,为了得到更合理的计算公式,我们考虑变加权函数中含有密度变量;此外,本文通过密度上下限约束,改善了传统聚焦反演中聚焦因子选取困难的问题.新算法获得的反演结果,对聚焦因子的选择约束较少,相比传统聚焦算法,能够更容易的获得理想结果.将方法应用于理论模型验证其有效性和正确性,并应用本文方法处理文顿盐丘地区的航空全张量重力梯度数据,得到了与已知地质信息匹配的密度分布,表明本文方法具有处理实际数据的能力.

     

A regularized magnetotelluric inversion with a minimum support gradient constraint*

Magnetotelluric (MT) inversion is an ill-posed problem and the standard way to address it is through regularization, by adding a stabilizing functional to the data objective functional in order to obtain a stable solution. The traditional stabilizing functionals, in which a low-order differential operator is used, yield a smooth solution that may not be appropriate when anomalies occur in block patterns. In some cases the focused imaging of a sharp electrical boundary is necessary. Even though various experiments have used stabilizing functionals that are suitable to obtain a clear and sharp boundary, such as the minimum support (MS) and the minimum gradient support (MGS) functionals, there are still some limitations in practice. In this paper, the minimum support gradient (MSG) is proposed as the stabilizing functional. Under the uniform regularization framework, a regularized inversion with a variety of stabilizing functionals is performed and the inversion results are compared. This study shows that MSG inversion can not only obtain a clearly focused inversion but also a quite stable and robust one.     

大地电磁全信息资料三维共轭梯度反演研究(英文)

在对张量阻抗数据、倾子数据和共轭梯度算法深入分析的基础上,我们实现了大地电磁全信息资料三维共轭梯度反演算法。基于全信息资料的三维共轭梯度反演研究,探讨了同时利用五个电磁场分量整理得到的大地电磁资料进行三维反演定量解释的方法以及全信息数据在三维反演中的作用。理论模型合成数据的反演结果表明,在三维反演中使用张量阻抗和倾子数据结合的全信息数据的反演结果优于只使用张量阻抗数据(或只使用倾子数据)的反演结果,提高了反演结果的分辨率和可信度。合成数据的反演算例也验证了所实现的大地电磁全信息资料三维共轭梯度反演算法的正确性和稳定性。     

基于重力梯度张量数据的欧拉反演在梅山铁矿的应用

随着在石油勘查、矿产勘查、构造研究等地质工作中提出的应用位场异常研究规模相对较小的地质体及其细节的要求不断提高,传统重力方法在精度和分辨率方面已不能满足要求.重力梯度张量作为重力位二次导数,较之重力异常,能够更直观地反映地下密度体的赋存状态,基于重力梯度张量数据的反演能够提高地质体的定量模拟质量.但是由于受国内仪器的发展水平限制,直接获取实测的重力张量数据难度较大,目前对于重力张量数据的获取主要是通过数值计算的方法,把重力异常测量值变换成张量信息.本文是在样条理论的基础上,提出新的重力梯度张量计算方法,利用三次样条插值方法拟合重力异常,进一步地通过积分导数关系求取样条函数系数,实现了由重力异常求取重力梯度张量的数据计算.在此基础上,利用张量数据进行欧拉反演计算,对比常规欧拉反演结果,进一步分析张量欧拉反演精度.球体及水平板状体模型试验结果显示,张量欧拉反演更能有效地完成目标体的反演,其结果更加准确.最后,将张量欧拉反演应用到梅山铁矿区重力实测数据解释中,准确地反演出梅山主矿体的水平投影范围及矿体中心埋深.同时,相比常规欧拉反演,张量欧拉反演在刘家村附近、梅山村南部及黄林库—吴家洼地段显...     

Forward plane-wave electromagnetic model in three dimensions using hybrid finite volume–integral equation scheme

We present a concept of the hybrid finite volume–integral equation technique for solving Maxwell's equation in a quasi-static form. The divergence correction was incorporated to improve the convergence and stability of the governing linear system equations which pose a challenge on the discretization of the curl–curl Helmholtz equation. A staggered finite volume approach is applied for discretizing the system of equations on a structured mesh and solved in a secondary field technique. The bi-conjugate gradient stabilizer was utilized with block incomplete lower-upper factorization preconditioner to solve the system of equation. To obtain the electric and magnetic fields at the receivers, we use the integral Green tensor scheme. We verify the strength of our hybrid technique with benchmark models relative to other numerical algorithms. Importantly, from the tested models, our scheme was in close agreement with the semi-analytical solution. It also revealed that the use of a quasi-analytical boundary condition helps to minimize the runtime for the linear system equation. Furthermore, the integral Green tensor approach to compute at the receivers demonstrates better accuracy compared with the conventional interpolation method. This adopted technique can be applied efficiently to the inversion procedure.     

Two-dimensional inversion of magnetotelluric data with consecutive use of conjugate gradient and least-squares solution with singular value decomposition algorithms

I investigated the two‐dimensional magnetotelluric data inversion algorithms in studying two significant aspects within a linearized inversion approach. The first one is the method of minimization and second one is the type of stabilizing functional used in parametric functionals. The results of two well‐known inversion algorithms, namely conjugate gradient and the least‐squares solution with singular value decomposition, were compared in terms of accuracy and CPU time. In addition, magnetotelluric data inversion with various stabilizers, such as L2‐norm, smoothing, minimum support, minimum gradient support and first‐order minimum entropy, were examined. A new inversion algorithm named least‐squares solution with singular value decomposition and conjugate gradient is suggested in seeing the outcomes of the comparisons carried out on least‐squares solutions with singular value decomposition and conjugate gradient algorithms subject to a variety of stabilizers. Inversion results of synthetic data showed that the newly suggested algorithm yields better results than those of the individual implementations of conjugate gradient and least‐squares solution with singular value decomposition algorithms. The suggested algorithm and the above‐mentioned algorithms inversion results for the field data collected along a line crossing the North Anatolian Fault zone were also compared each other and results are discussed.     

基于地质体空间位置优化约束的航空重力梯度数据三维物性反演

重力数据的物性反演面临着严重的多解性问题,降低多解性的有效手段是加入约束条件.而边界识别、深度估计及成像方法可获取地质体的水平位置、深度范围等几何参数信息,本文将基于数据本身挖掘的地质体几何参数信息约束到物性反演中,以降低反演的多解性.通过引入基于深度信息的深度加权函数及基于水平位置的水平梯度加权函数建立优化约束条件,有效地提高了反演结果的横向及纵向分辨率.重力梯度数据包含更多的地质体空间特征信息,将优化约束反演方法应用到全张量数据的反演中,模型试验表明本文方法反演结果与理论模型更加吻合.最后对美国路易斯安那州文顿盐丘实测航空重力梯度数据的应用表明,本文方法在其他地球物理、地质资料不足的情况下获得更可靠的反演结果.

     

光滑模型与尖锐边界结合的MT二维反演方法

如何得到快速稳定的反演结果和更清晰的地质体分界面等问题仍然是当前MT反演研究的一个重点.为了解决反演结果不能得到清晰的电性分界面的问题,本文在前人研究的基础上,基于OCCAM反演以及突出尖锐边界反演的思想,结合最小支撑梯度泛函,构建了新的反演目标函数,并利用共轭梯度法优化目标函数,实现了一种光滑模型与尖锐边界结合的MT二维反演方法.模型实验证明了该方法的准确性,通过与已发表的相关反演方法的结果进行比较,证明了该方法在光滑稳定的基础上可突出对尖锐电性边界的刻画.对广东徐闻地区的实测MT资料进行了处理,表明了该方法的适用性和效果.     

磁张量梯度数据方向解析信号比值的边界识别和空间位置反演方法

磁张量梯度测量具有高分辨率、多参量的优点,能更准确地描述磁源体的分布特征,在矿产资源勘探中具有广阔的用途.磁异常解析信号具有受倾斜磁化干扰小的特点,且为了增强深部地质体的分辨能力,本文提出磁张量梯度数据的解析信号比值的均衡边界识别及空间位置反演技术.磁张量梯度数据的均衡边界识别方法为不同方向解析信号比值的反正切函数,在降低倾斜磁化干扰的同时能有效地均衡不同深度地质体的响应,提高了对较深地质体的分辨率;空间位置反演技术是建立解析信号比值与地质体位置参数的对应方程,利用解析信号比值与地质体的对应关系作为约束条件来反演获得地质体的水平位置和深度信息,具有无需已知任何先验信息的优势.通过磁性体张量异常试验表明解析信号比值的边界识别方法能清晰和准确地获得不同深度地质体的边界,所建立的反演方程能准确地计算出地质体的范围和深度,具有较高的水平分辨率和精度.将本文方法应用于实测磁张量梯度数据的解释,获得了地下铁矿的分布特征,为区域矿产资源潜力评价提供了翔实的基础资料.

     

二维大地电磁尖锐边界反演研究

尖锐边界反演是大地电磁及其他地球物理反演中的一个较难解决的问题,目前有不少专家正对这方面进行研究.我们在分析了Zhdanov（2004）提出的基于最小支撑泛函聚焦反演方法的基础上,在目标函数中引入对角梯度支撑以改善倾斜电性分界面的反演效果.同时,为了提高计算效率,本文还使用互易定义计算灵敏度矩阵及使用正则化共轭梯度法优化目标函数.通过模型试验并与未引入对角梯度支撑的反演结果进行了比较,表明本文的方法反演效果更好而且算法稳定和实用.     

简化混合域全波形反演多GPU加速策略

全波形反演利用地震记录中的振幅、走时和相位等信息,通过拟合实际地震记录和计算波场来定量提取地下介质的弹性参数,进而为勘探地震成像、速度建模以及大尺度构造演化分析等提供可靠依据.但全波形反演计算量巨大,特别是应用于三维大区块叠前数据时,生产成本仍然很高.本文介绍并比较了时间域和频率域的全波形反演方法,综合两者的优点,最终采用混合域的反演算法,并且在此基础上做了进一步的简化以提高计算效率.针对全波形反演方法应用于大规模叠前数据时易陷入局部极小值的问题,我们提出对模型数据进行分割,同时在数个小模型内进行梯度搜索,然后对比各个局域的梯度,最终找出合适的全局下降方向,以克服局部极小的隐患.该方法能够充分利用GPU的硬件特性.在GPU环境下实现本文所提出的简化混合域全波形反演算法.数值计算实例体现出新方法具有良好的计算效率、反演精度和算法可扩展性.

     

(T2,D)二维核磁共振测井混合反演方法与参数影响分析

一维核磁共振(1D NMR)测井技术在流体识别中具有一定的局限性.二维核磁共振(2D NMR)测井能同时测量到多孔介质中横向弛豫时间(T₂)和扩散系数(D)等信息,利用这两个参数区分流体性质,较一维核磁共振测井技术具有明显的优越性.针对梯度场下的2D NMR测井弛豫机理和数学模型,提出了适用于求解大型稀疏矩阵方程的反演方法-基于非负最小二乘法(LSQR)和截断奇异值分解(TSVD)法的混合算法.为验证方法的有效性,先根据多回波观测模式合成回波串数据,然后再用混合反演算法进行反演,反演得到横向弛豫时间(T₂)和扩散系数(D),并构建T₂-D二维谱图.结果对比表明,该混合反演算法得到的T₂-D二维谱与流体模型一致性好,计算精度均比单一反演方法有较大改善,表明该混合反演方法可用于油气储集层2D NMR测井的反演和流体识别.此外,分别对油水同层和气水同层模型进行了正演模拟和反演实验, 系统考察了不同磁场梯度、不同回波间隔组合对反演效果的影响,为2D NMR参数设计提供依据.     

Estimating magnetic dike parameters using a non‐linear constrained inversion technique: an example from the Särna area,west central Sweden

In this paper, we describe a non‐linear constrained inversion technique for 2D interpretation of high resolution magnetic field data along flight lines using a simple dike model. We first estimate the strike direction of a quasi 2D structure based on the eigenvector corresponding to the minimum eigenvalue of the pseudogravity gradient tensor derived from gridded, low‐pass filtered magnetic field anomalies, assuming that the magnetization direction is known. Then the measured magnetic field can be transformed into the strike coordinate system and all magnetic dike parameters – horizontal position, depth to the top, dip angle, width and susceptibility contrast – can be estimated by non‐linear least squares inversion of the high resolution magnetic field data along the flight lines. We use the Levenberg‐Marquardt algorithm together with the trust‐region‐reflective method enabling users to define inequality constraints on model parameters such that the estimated parameters are always in a trust region. Assuming that the maximum of the calculated g_zz (vertical gradient of the pseudogravity field) is approximately located above the causative body, data points enclosed by a window, along the profile, centred at the maximum of g_zz are used in the inversion scheme for estimating the dike parameters. The size of the window is increased until it exceeds a predefined limit. Then the solution corresponding to the minimum data fit error is chosen as the most reliable one. Using synthetic data we study the effect of random noise and interfering sources on the estimated models and we apply our method to a new aeromagnetic data set from the Särna area, west central Sweden including constraints from laboratory measurements on rock samples from the area.     

重力和重力梯度数据联合聚焦反演方法

重力数据包含较多的低频信息,重力梯度数据包含较多的高频信息,将重力数据和重力梯度数据进行联合反演得到的结果更加可信.本文基于聚焦反演方法,实现了这一过程.因为联合反演中分量种类增加,所以计算灵敏度矩阵所需要的时间增加,为此,本文提出了一种快速计算灵敏度矩阵的方法.因为联合反演对内存的要求增大,本文选择有限内存BFGS拟牛顿法求解反演问题.本文通过再加权的方法实现深度加权.文中利用单一分量的反演结果来预测异常体的埋深信息,随后将埋深信息结合到深度加权函数中,将其用于多分量组合反演计算.给出了模型试验,发现预测得到的异常体的埋深信息与其实际埋深存在偏差,但是将这一信息应用到反演计算,能够得到与真实模型一致的结果.之后,本文通过模型试验来探究重力和重力梯度联合反演的优势,发现将重力和重力梯度数据联合,能够识别出额外的噪声,反演得到的模型更加合理.但是,对于不同分量组合得到的反演结果是相近的,反演模型的提高很小.最后,将联合反演方法应用到美国路易斯安那州Vinton岩丘的实际数据中,结果显示,将重力和重力梯度数据联合反演,反演模型得到了提高,反演得到的结果与地质资料吻合.     

Depth from extreme points method for gravity gradient tensor data

The ‘depth from extreme points’ method is an important tool to estimate the depth of sources of gravity and magnetic data. In order to interpret gravity gradient tensor data conveniently, formulas for the tensor data form regarding depth from the extreme points method were calculated in this paper. Then, all of the gradient tensor components were directly used to interpret the causative source. Beyond the g_zz component, also the g_xx and g_yy components can be used to obtain depth information. In addition, the total horizontal derivative of the depth from extreme points of the gradient tensor can be used to describe the edge information of geologic sources. In this paper, we investigated the consistency of the homogeneity degree calculated by using the different components, which leads to the calculated depth being confirmed. Therefore, a more integrated interpretation can be obtained by using the gradient tensor components. Different synthetic models were used with and without noise to test the new approach, showing stability, accuracy and speed. The proposed method proved to be a useful tool for gradient tensor data interpretation. Finally, the proposed method was applied to full tensor gradient data acquired over the Vinton Salt Dome, Louisiana, USA, and the results are in agreement with those obtained in previous research studies.     

全张量磁梯度数据解释的均衡边界识别及深度成像技术

全张量磁梯度数据具有高精度、高分辨率、多参量的优点,能更加清晰地刻画地质体的分布特征,综合利用磁张量梯度数据准确地获得地质体水平位置和深度信息是解释的主要目的.磁张量数据的方向解析信号具有减小倾斜磁化干扰的优点,常被用来圈定磁源体的水平位置,但解析信号强度随着地质体埋深的增加急剧衰减,难以有效识别较深的地质体.张量数据均衡边界识别技术,利用不同方向解析信号的比值函数,能有效地均衡不同深度地质体的响应,同时显示不同深度地质体的边界,提高了对较深地质体的分辨率.磁张量数据深度成像技术根据实测张量数据与假定模型张量数据的相关系数来给定地质体的深度,综合利用多参量数据联合反演提高了反演结果的准确性,且无需进行复杂的反演运算,是大数据量张量数据解释的有效方法.理论模型试验证明：磁张量数据均衡边界识别技术可清晰和准确地识别地质体的水平范围,受倾斜磁化干扰小;磁张量数据深度成像技术可准确地获得地质体的深度信息,具有较强的抗噪性.将上述方法应用于铁矿区实测航磁张量梯度数据解释,获得了铁矿体水平分布与埋深,深度结果与张量欧拉反褶积法计算结果一致.

     

地震动旋转分量用于矩张量反演的数值试验

地震动旋转分量可以提供传统平动分量所欠缺的空间梯度信息,理论上可以提升对震源参数的约束.本文对旋转分量用于矩张量反演进行了较为全面的数值试验.首先分析了均匀无限空间中位错点源产生的旋转波场与平动波场在辐射花样上的互补性,由此推测旋转分量用于矩张量反演能提供额外的约束.随后基于层状介质模型合成的平动和旋转记录,开展了地震矩张量反演测试研究.我们通过对比反演得到的矩张量、矩张量差异角Δφ和地震矩,定量评估在矩张量反演中引入旋转分量的作用,发现在合适的条件下,在原平动记录基础上加入旋转记录来联合反演会显著提升反演结果的可靠性,可减小矩张量差异角Δφ30%以上,极端条件下70%以上;如保持总记录数量不变（即在部分台站添加旋转分量替换其他台站的平动分量）,某些矩张量元素反演效果会变好,但某些元素可能会变差.整体而言,在多数台站分布的情况下加入旋转都能起到强于增加同等数目平动台站的作用.同时,我们还发现在低频情况下,旋转分量对于深度非常敏感,引入旋转分量对于约束矩心深度有非常显著的效果.此外,还尝试了不同的试验条件,发现在低频、震中距较小、信噪比较低、速度结构模型较为准确的情况下,加入旋转分量对结果的提升更明显.整体而言,尽管旋转分量的使用需要满足一定的条件,将旋转用于矩张量反演是可行的,它能为矩张量反演提供与平动分量互补的信息,在稀疏台站和密集平动的台站的情况下加入旋转观测将显著增强对地震的监测能力.

     

三维大地电磁自适应正则化有限内存拟牛顿反演

有别于传统基于梯度信息的反演方法在正则化约束中用总梯度逼近海塞逆矩阵的技术,本文将正则化约束问题的数据拟合项和模型光滑项分开考虑,只利用数据拟合函数的梯度信息对数据拟合项的海塞矩阵进行逼近,通过求解类高斯牛顿下降方向方程得到不依赖前几次迭代正则化因子的更精确下降方向,在求解当前迭代下降方向的过程中,通过保证右端项中两个向量的二范数在同一数量级的原则,实现了正则化因子的自动更新.对理论模型的试算表明这种自适应正则化反演方案可以在拟牛顿反演框架下基本达到OCCAM的算法稳定性,反演结果对初始模型依赖性较小,同时又无需在一次迭代中多次搜索最佳正则化因子.本文还基于此算法讨论了大地电磁各参数对于反演结果的影响,由于本文的反演结果能得到充分的正则化约束,因而在此框架下讨论阻抗和倾子在反演中的作用相对更为客观.

     

基于Gramian约束与高斯-牛顿算法的重磁三维联合反演

为了降低重力与磁法单独反演中的非唯一性问题,本文实现了一种基于Gramian约束的重磁三维联合反演算法.使用基于模型参数或其空间梯度的Gramian算子,将其添加到目标函数中,约束剩余密度与剩余磁化率模型参数或其梯度更具相关性.采用高斯-牛顿法对目标函数进行最优化求解,对求解方程进行了简化,节省内存并提高了计算效率.反演过程中使用对数法约束模型参数的上下界,使反演结果更符合真实地质情况.提出了新的模型更新步长计算策略,同时考虑了数据拟合与联合约束的影响,使联合反演更加稳定.通过三个数值模型验证了算法的可靠性,并进一步将该算法应用于加拿大McFaulds湖实测航空重磁数据.对比了反演结果切片并展示了交会图,联合反演得到的剩余密度与剩余磁化率的物性、梯度分布都比单独反演的相关性更强.联合反演提供了一个既能拟合数据又在一定程度上满足耦合条件的反演解.验证了所开发的联合反演算法在实际数据上的有效性与适用性.

     

An Improved Analytic Signal Technique for the Depth and Structural Index from 2D Magnetic Anomaly Data

This paper presents a new inversion method for the interpretation of 2D magnetic anomaly data, which uses the combination of the analytic signal and its total gradient to estimate the depth and the nature (structural index) of an isolated magnetic source. However, our proposed method is sensitive to noise. In order to lower the effect of noise, we apply upward continuation technique to smooth the anomaly. Tests on synthetic noise-free and noise corrupted magnetic data show that the new method can successfully estimate the depth and the nature of the causative source. The practical application of the technique is applied to measured magnetic anomaly data from Jurh area, northeast China, and the inversion results are in agreement with the inversion results from Euler deconvolution of the analytic signal.