Magmatic infiltration and melting in the lower crust and upper mantle beneath the Cima volcanic field,California

 Xenoliths of lower crustal and upper mantle rocks from the Cima volcanic field (CVF) commonly contain glass pockets, veins, and planar trains of glass and/or fluid inclusions in primary minerals. Glass pockets occupy spaces formerly occupied by primary minerals of the host rocks, but there is a general lack of correspondence between the composition of the glass and that of the replaced primary minerals. The melting is considered to have been induced by infiltration of basaltic magma and differentiates of basaltic magma from complex conduits formed by hydraulic fracturing of the mantle and crustal rocks, and to have occurred during the episode of CVF magmatism between ∼7.5 Ma and present. Variable compositions of quenched melts resulted from mixing of introduced melts and products of melting of primary minerals, reaction with primary minerals, partial crystallization, and fractionation resulting from melt and volatile expulsion upon entrainment of the xenoliths. High silica melts ( >∼60% SiO₂) may result by mixing introduced melts with siliceous melts produced by reaction of orthopyroxene. Other quenched melt compositions range from those comparable to the host basalts to those with intermediate Si compositions and elevated Al, alkalis, Ti, P, and S; groundmass compositions of CVF basalts are consistent with infiltration of fractionates of those basalts, but near-solidus melting may also contribute to formation of glass with intermediate silica contents with infiltration only of volatile constituents. Received: 15 June 1995 / Accepted: 13 December 1995     

The Genesis of Intermediate and Silicic Magmas in Deep Crustal Hot Zones

A model for the generation of intermediate and silicic igneousrocks is presented, based on experimental data and numericalmodelling. The model is directed at subduction-related magmatism,but has general applicability to magmas generated in other platetectonic settings, including continental rift zones. In themodel mantle-derived hydrous basalts emplaced as a successionof sills into the lower crust generate a deep crustal hot zone.Numerical modelling of the hot zone shows that melts are generatedfrom two distinct sources; partial crystallization of basaltsills to produce residual H₂O-rich melts; and partial meltingof pre-existing crustal rocks. Incubation times between theinjection of the first sill and generation of residual meltsfrom basalt crystallization are controlled by the initial geotherm,the magma input rate and the emplacement depth. After this incubationperiod, the melt fraction and composition of residual meltsare controlled by the temperature of the crust into which thebasalt is intruded. Heat and H₂O transfer from the crystallizingbasalt promote partial melting of the surrounding crust, whichcan include meta-sedimentary and meta-igneous basement rocksand earlier basalt intrusions. Mixing of residual and crustalpartial melts leads to diversity in isotope and trace elementchemistry. Hot zone melts are H₂O-rich. Consequently, they havelow viscosity and density, and can readily detach from theirsource and ascend rapidly. In the case of adiabatic ascent themagma attains a super-liquidus state, because of the relativeslopes of the adiabat and the liquidus. This leads to resorptionof any entrained crystals or country rock xenoliths. Crystallizationbegins only when the ascending magma intersects its H₂O-saturatedliquidus at shallow depths. Decompression and degassing arethe driving forces behind crystallization, which takes placeat shallow depth on timescales of decades or less. Degassingand crystallization at shallow depth lead to large increasesin viscosity and stalling of the magma to form volcano-feedingmagma chambers and shallow plutons. It is proposed that chemicaldiversity in arc magmas is largely acquired in the lower crust,whereas textural diversity is related to shallow-level crystallization. KEY WORDS: magma genesis; deep hot zone; residual melt; partial melt; adiabatic ascent     

大陆边缘弧岩浆成因与大陆地壳形成

大陆地壳如何形成是国际学术界长期关注并正在持续攻关的一个重大基础科学问题。活动陆缘弧的岩浆成因和密度分选过程是理解大陆地壳形成机制和演化过程的关键。北美白垩纪Cordilleran大陆边缘弧的形成可能经历了与底侵幔源岩浆有关的下地壳部分熔融和岩浆混合,或幔源初始玄武质岩浆的两阶段成分分异过程,以花岗质成分为主的北美内华达地区垂向地壳成分剖面结构可能与榴辉岩相残留体或堆晶岩的拆沉作用密切相关。目前并不清楚亚洲大陆南部以约200 Ma和约90 Ma两个时间断面为代表的中生代冈底斯弧,为何出现大量角闪石岩并具有玄武安山质的平均成分。探究中生代冈底斯弧的岩浆成因、地壳垂向成分结构和地壳形成机制可能有助于或多或少地解决这一问题。     

Evidence for synchronous extrusive and intrusive Bushveld magmatism

The intracratonic, 2.06 Ga volcanic rocks of the Rooiberg Group of southern Africa consist of nine magma types, varying in composition from basalt to rhyolite. Basalts and andesites, intercalated with dacites and rhyolites, are found towards the base; rhyolite is the chief magma composition in the upper succession. The absence of compositions intermediate to the magma types and variations in major and trace element concentrations suggest that fractional crystallization was not prominent in controlling magma compositions. REE patterns are comparable for all magma types and concentrations increase for successively younger magmas; LREE show enriched patterns and HREE are flat. Elevated Sr_i-ratios and high concentrations of elements characteristically enriched in the crust suggest that the Rooiberg magmas were crustally contaminated or derived from crustal material. Some Rooiberg features are related to the intrusive events of the Bushveld complex.Petrogenesis of both the Rooiberg Group and the mafic intrusives of the Bushveld complex is linked to a mantle plume, melting at progressively higher crustal levels. The basal Rooiberg magmas have undergone a complex history of partial melting, magma mixing and crustal contamination. Crustal melts extruded as siliceous volcanic flows to form the Upper Rooiberg Group, simultaneously intruding at shallow levels as granophyres. Crustally contaminated plume magma synchronously intruded beneath the Rooiberg Group to produce the mafic rocks of the Rustenburg Layered Suite. Granite intrusions terminated the Bushveld event. The Bushveld plume was short-lived, which conforms, together with other features, with younger, voluminous plume environments.     

Parental magmas of the Nain Plutonic Suite anorthosites and mafic cumulates: a trace element modelling approach

Equilibrium melt trace element contents are calculated from Proterozoic Nain Plutonic Suite (NPS) mafic and anorthositic cumulates, and from plagioclase and orthopyroxene megacrysts. Assumed trapped melt fractions (TMF) <20% generally eliminate all minor phases in most mafic cumulate rocks, reducing them to mixtures of feldspar, pyroxene and olivine, which would represent the high-temperature cumulus assemblage. In anorthosites, TMF <15% generally reduce the mode to a feldspar-only assemblage. All model melts have trace element profiles enriched in highly incompatible elements relative to normal mid-ocean ridge basalt (NMORB); commonly with negative Nb and Th anomalies. Most mafic cumulates yield similar profiles with constant incompatible element ratios, and can be linked through fractional crystallization. High K-La subtypes probably represent crust-contaminated facies. Mafic cumulates are inferred to belong to a tholeiitic differentiation series, variably contaminated by upper and lower crustal components, and probably related to coeval tholeiitic basaltic dyke swarms and lavas in Labrador. Model melts from anorthosites and megacrysts have normalized trace element profiles with steeper slopes than those calculated from mafic cumulates, indicating that mafic cumulates and anorthosites did not crystallize from the same melts. Orthopyroxene megacrysts yield model melts that are more enriched than typical anorthositic model melts, precluding an origin from parental melts. Jotunites have lower K-Rb-Ba-Y-Yb and higher La-Ce than model residues from fractionation of anorthositic model melts, suggesting they are not cosanguineous with them, but provide reasonable fits to evolved mafic cumulate model melts. Incompatible element profiles of anorthositic model melts closely resemble those of crustal melts such as tonalites, with steep Y-Yb-Lu segments that suggest residual garnet in the source. Inversion models yield protoliths similar to depleted lower crustal granulite xenoliths with aluminous compositions, suggesting that the incompatible trace element budget of the anorthosites are derived from remobilization of the lower crust. The similarity of the highly incompatible trace elements and LILE between anorthositic and mafic cumulate model melts suggests that the basalts parental to the mafic cumulates locally assimilated considerable quantities of the same crust that yielded the anorthosites. The reaction between underplating basalt and aluminous lower crust would have forced crystallization of abundant plagioclase, and remobilization of these hybrid plagioclase-rich mushes then produced the anorthosite massifs.     

A mineral and cumulate perspective to magma differentiation at Nisyros volcano,Aegean arc

Lavas and pyroclastic products of Nisyros volcano (Aegean arc, Greece) host a wide variety of phenocryst and cumulate assemblages that offer a unique window into the earliest stages of magma differentiation. This study presents a detailed petrographic study of lavas, enclaves and cumulates spanning the entire volcanic history of Nisyros to elucidate at which levels in the crust magmas stall and differentiate. We present a new division for the volcanic products into two suites based on field occurrence and petrographic features: a low-porphyricity andesite and a high-porphyricity (rhyo)dacite (HPRD) suite. Cumulate fragments are exclusively found in the HPRD suite and are predominantly derived from upper crustal reservoirs where they crystallised under hydrous conditions from melts that underwent prior differentiation. Rarer cumulate fragments range from (amphibole-)wehrlites to plagioclase-hornblendites and these appear to be derived from the lower crust (0.5–0.8 GPa). The suppressed stability of plagioclase and early saturation of amphibole in these cumulates are indicative of high-pressure crystallisation from primitive hydrous melts (≥ 3 wt% H₂O). Clinopyroxene in these cumulates has Al₂O₃ contents up to 9 wt% due to the absence of crystallising plagioclase, and is subsequently consumed in a peritectic reaction to form primitive, Al-rich amphibole (Mg# > 73, 12–15 wt% Al₂O₃). The composition of these peritectic amphiboles is distinct from trace element-enriched interstitial amphibole in shallower cumulates. Phenocryst compositions and assemblages in both suites differ markedly from the cumulates. Phenocrysts, therefore, reflect shallow crystallisation and do not record magma differentiation in the deep arc crust.     

Construction of the granitoid crust of an island arc. Part II: a quantitative petrogenetic model

Results of simple model calculations that integrate cumulate compositions from the Kohistan arc terrain are presented in order to develop a consistent petrogenetic model to explain the Kohistan island arc granitoids. The model allows a quantitative approximation of the possible relative roles of fractional crystallization and assimilation to explain the silica-rich upper crust composition of oceanic arcs. Depending in detail on the parental magma composition hydrous moderate-to-high pressure fractional crystallization in the lower crust/upper mantle is an adequate upper continental crust forming mechanism in terms of volume and compositions. Accordingly, assimilation and partial melting in the lower crust is not per se a necessary process to explain island arc granitoids. However, deriving few percent of melts using low degree of dehydration melting is a crucial process to produce volumetrically important amounts of upper continental crust from silica-poorer parental magmas. Even though the model can explain the silica-rich upper crustal composition of the Kohistan, the fractionation model does not predict the accepted composition of the bulk continental crust. This finding supports the idea that additional crustal refining mechanism (e.g., delamination of lower crustal rocks) and/or non-cogenetic magmatic process were critical to create the bulk continental crust composition.     

High-pressure partial melting of gabbro and its role in the Hawaiian magma source

We have conducted high-pressure experiments on a natural oceanic gabbro composition (Gb108). Our aim was to test recent proposals that Sr-enrichment in rare primitive melt inclusions from Mauna Loa, Hawaii, may have resulted from melting of garnet pyroxenite formed in the magma source regions by reaction of peridotite with siliceous, Sr-enriched partial melts of eclogite of gabbroic composition. Gb108 is a natural, Sr-enriched olivine gabbro, which has a strong positive Sr anomaly superimposed on an overall depleted incompatible trace element pattern, reflecting its origin as a plagioclase-rich cumulate. At high pressures it crystallises as a coesite eclogite assemblage, with the solidus between 1,300 and 1,350°C at 3.5 GPa and 1,450 and 1,500°C at 4.5 GPa. Clinopyroxenes contain 4–9% Ca-eskolaite component, which varies systematically with pressure and temperature. Garnets are almandine and grossular-rich. Low degree partial melts are highly siliceous in composition, resembling dacites. Coesite is eliminated between 50 and 100°C above the solidus. The whole-rock Sr-enrichment is primarily hosted by clinopyroxene. This phase dominates the mode (>75 wt%) at all investigated PT conditions, and is the major contributor to partial melts of this eclogite composition. Hence the partial melts have trace element patterns sub-parallel to those of clinopyroxene with ≈10× greater overall abundances and with strong positive Sr anomalies. Recent studies of primitive Hawaiian volcanics have suggested the incorporation into their source regions of eclogite, formerly gabbroic material recycled through the mantle at subduction zones. The models suggest that formerly gabbroic material, present as eclogite in the Hawaiian plume, partially melted earlier than surrounding peridotite (i.e. at higher pressure) because of the lower solidus temperature of eclogite compared with peridotite. This produced highly siliceous melts which reacted with surrounding peridotite producing hybrid pyroxene + garnet lithologies. The Sr-enriched nature of the formerly plagioclase-rich gabbro was present in the siliceous partial melts, as demonstrated by these experiments, and was transferred to the reactive pyroxenite. These in turn partially melted, producing Sr-enriched picritic liquids which mixed with normal picritic partial melts of peridotite before eruption. On rare occasions these mixed, relatively Sr-rich melts were trapped as melt inclusions in primitive olivine phenocrysts. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Primitive andesites from the Taupo Volcanic Zone formed by magma mixing

Andesites with Mg# >45 erupted at subduction zones form either by partial melting of metasomatized mantle or by mixing and assimilation processes during melt ascent. Primitive whole rock basaltic andesites from the Pukeonake vent in the Tongariro Volcanic Centre in New Zealand’s Taupo Volcanic Zone contain olivine, clino- and orthopyroxene, and plagioclase xeno- and antecrysts in a partly glassy matrix. Glass pools interstitial between minerals and glass inclusions in clinopyroxene, orthopyroxene and plagioclase as well as matrix glasses are rhyolitic to dacitic indicating that the melts were more evolved than their andesitic bulk host rock analyses indicate. Olivine xenocrysts have high Fo contents up to 94%, δ¹⁸O_(SMOW) of +5.1‰, and contain Cr-spinel inclusions, all of which imply an origin in equilibrium with primitive mantle-derived melts. Mineral zoning in olivine, clinopyroxene and plagioclase suggest that fractional crystallization occurred. Elevated O isotope ratios in clinopyroxene and glass indicate that the lavas assimilated sedimentary rocks during stagnation in the crust. Thus, the Pukeonake andesites formed by a combination of fractional crystallization, assimilation of crustal rocks, and mixing of dacite liquid with mantle-derived minerals in a complex crustal magma system. The disequilibrium textures and O isotope compositions of the minerals indicate mixing processes on timescales of less than a year prior to eruption. Similar processes may occur in other subduction zones and require careful study of the lavas to determine the origin of andesite magmas in arc volcanoes situated on continental crust.     

Petrology and geochemistry of xenoliths from the Northern Baltic shield: evidence for partial melting and metasomatism in the lower crust beneath an Archaean terrane

Lower crustal xenoliths entrained in a Paleozoic ultramafic lamprophyre breccia pipe on Elovy island, Kola peninsula, Russia, represent some of the oldest lower crustal material yet investigated from Europe. The xenoliths vary from feldspar-poor, garnetrich rocks which resemble eclogites, to feldspar-rich garnet granulites. Quartz-rich felsic granulites, as well as pyroxenites and amphibole-rich rocks are also present.

The mafic granulites/eclogites represent a suite of gabbros and norites that is related by olivine fractionation. The igneous protoliths may have formed in a manner analogous to lower crustal rocks from most other European xenolith localities, i.e. by basaltic underplating, but magmatic cumulates are not in evidence.

The Kola lower crust was subjected to one or more metasomatic events which introduced up to 45% phlogopite and/or amphibole into both eclogites/granulites and pyroxenites. The resulting rocks have strong enrichments in Rb, Ba, and K, indicating that the lower crust is not uniformly depleted in LIL and heat-producing elements. Siliceous (65% SiO₂) and mafic (< 50% SiO₂) lithologies coexist in migmatitic xenoliths, which provide evidence for partial melting processes and restite formation in mafic metaigneous lower crust. The relationship, if any, between partial melting and metasomatism is unclear.     

Silicate-carbonate-salt liquid immiscibility and origin of the sodalite-haüyne rocks: study of melt inclusions in olivine foidite from Vulture volcano, S. Italy

Melt inclusions in clinopyroxenes of olivine foidite bombs from Serra di Constantinopoli pyroclastic flows of the Vulture volcano (Southern Italy) were studied in detail. The rocks contain abundant zoned phenocrysts and xenocrysts of clinopyroxene, scarce grains of olivine, leucite, haüyne, glass with microlites of plagioclase and K-feldspar. The composition of clinopyroxene in xenocrysts (Cpx I), cores (Cpx II), and in rims (Cpx III) of phenocrysts differs in the content of Mg, Fe, Ti, and Al. All clinopyroxenes contain two types of primary inclusion-pure silicate and of silicate-carbonate-salt composition. This fact suggests that the phenomena of silicate-carbonate immiscibility took place prior to crystallization of clinopyroxene. Homogenization of pure silicate inclusions proceeded at 1 225 – 1 190°C. The composition of conserved melts corresponded to that of olivine foidite in Cpx I, to tephrite-phonolite in Cpx II, and phonolite-nepheline trachyte in Cpx III. The amount of water in them was no more than 0.9 wt.%. Silicate-carbonate inclusions decrepitated on heating. Salt globules contained salts of alkali-sulphate, alkali-carbonate, and Ca-carbonate composition somewhat enriched in Ba and Sr. This composition is typical of carbonatite melts when decomposed into immiscible fractions. The formation of sodalite-haüyne rocks from Vulture is related to the presence of carbonate-salt melts in magma chamber. The melts conserved in clinopyroxenes were enriched in incompatible elements, especially in Cpx III. High ratios of La, Nb, and Ta in melts on crystallization of Cpx I and Cpx II suggest the influence of a carbonatite melt as carbonatites have extremely high La/Nb and Nb/Ta and this is confirmed by the appearance of carbonatite melts in magma chamber. Some anomalies in the concentrations and relatives values of Eu and especially Ga seems typical of Italian carbonatite related melts. The mantle source for initial melts was, most likely, rather uniform, undepleted and was characterized by a low degree of melting and probable presence of garnet in restite.     

The Generation of Granitic Magmas by Intrusion of Basalt into Continental Crust

When basalt magmas are emplaced into continental crust, meltingand generation of silicic magma can be expected. The fluid dynamicaland heat transfer processes at the roof of a basaltic sill inwhich the wall rock melts are investigated theoretically andalso experimentally using waxes and aqueous solutions. At theroof, the low density melt forms a stable melt layer with negligiblemixing with the underlying hot liquid. A quantitative theoryfor the roof melting case has been developed. When applied tobasalt sills in hot crust, the theory predicts that basalt sillsof thicknesses from 10 to 1500 m require only 1 to 270 y tosolidify and would form voluminous overlying layers of convectingsilicic magma. For example, for a 500 m sill with a crustalmelting temperature of 850 ?C, the thickness of the silicicmagma layer generated ranges from 300 to 1000 m for countryrock temperatures from 500 to 850?C. The temperatures of thecrustal melt layers at the time that the basalt solidifies arehigh (900–950?C) so that the process can produce magmasrepresenting large degrees of partial fusion of the crust. Meltingoccurs in the solid roof and the adjacent thermal boundary layer,while at the same time there is crystallization in the convectinginterior. Thus the magmas formed can be highly porphyritic.Our calculations also indicate that such magmas can containsignificant proportions of restite crystals. Much of the refractorycomponents of the crust are dissolved and then re-precipitatedto form genuine igneous phenocrysts. Normally zoned plagioclasefeldspar phenocrysts with discrete calcic cores are commonlyobserved in many granitoids and silicic volcanic rocks. Suchpatterns would be expected in crustal melting, where simultaneouscrystallization is an inevitable consequence of the fluid dynamics. The time-scales for melting and crystallization in basalt-inducedcrustal melting (10²–10³ y) are very short compared tothe lifetimes of large silicic magma systems (>10⁶ y) orto the time-scale for thermal relaxation of the continentalcrust (> l0⁷ y). Several of the features of silicic igneoussystems can be explained without requiring large, high-level,long-lived magma chambers. Cycles of mafic to increasingly largevolumes of silicic magma with time are commonly observed inmany systems. These can be interpreted as progressive heatingof the crust until the source region is partially molten andbasalt can no longer penetrate. Every input of basalt triggersrapid formation of silicic magma in the source region. Thismagma will freeze again in time-scales of order l0²–10³y unless it ascends to higher levels. Crystallization can occurin the source region during melting, and eruption of porphyriticmagmas does not require a shallow magma chamber, although suchchambers may develop as magma is intruded into high levels inthe crust. For typical compositions of upper crustal rocks,the model predicts that dacitic volcanic rocks and granodiorite/tonaliteplutons would be the dominant rock types and that these wouldascend-from the source region and form magmas ranging from thosewith high temperature and low crystal content to those withhigh crystal content and a significant proportion of restite.     

Magmatic processes that generated the rhyolite of Glass Mountain, Medicine Lake volcano, N. California

Glass Mountain consists of a 1 km³, compositionally zoned rhyolite to dacite glass flow containing magmatic inclusions and xenoliths of underlying shallow crust. Mixing of magmas produced by fractional crystallization of andesite and crustal melting generated the rhyolite of Glass Mountain. Melting experiments were carried out on basaltic andesite and andesite magmatic inclusions at 100, 150 and 200 MPa, H₂O-saturated with oxygen fugacity controlled at the nickel-nickel oxide buffer to provide evidence of the role of fractional crystallization in the origin of the rhyolite of Glass Mountain. Isotopic evidence indicates that the crustal component assimilated at Glass Mountain constitutes at least 55 to 60% of the mass of erupted rhyolite. A large volume of mafic andesite (2 to 2.5 km³) periodically replenished the magma reservoir(s) beneath Glass Mountain, underwent extensive fractional crystallization and provided the heat necessary to melt the crust. The crystalline residues of fractionation as well as residual liquids expelled from the cumulate residues are preserved as magmatic inclusions and indicate that this fractionation process occurred at two distinct depths. The presence and composition of amphibole in magmatic inclusions preserve evidence for crystallization of the andesite at pressures of at least 200 MPa (6 km depth) under near H₂O-saturated conditions. Mineralogical evidence preserved in olivine-plagioclase and olivine-plagioclase-high-Ca clinopyroxene-bearing magmatic inclusions indicates that crystallization under near H₂O-saturated conditions also occurred at pressures of 100 MPa (3 km depth) or less. Petrologic, isotopic and geochemical evidence indicate that the andesite underwent fractional crystallization to form the differentiated melts but had no chemical interaction with the melted crustal component. Heat released by the fractionation process was responsible for heating and melting the crust. Received: 26 March 1996 / Accepted: 14 November 1996     

Glass-bearing gabbro inclusions in hyaloclastites from Tindfjallajökull,Iceland

Gabbro inclusions from Tindfjallajökull are divided into two types: I. Panidiomorphic gabbros of non-cumulative origin composed of plagioclase + olivine ± clinopyroxene and interstitil vesicular glass. They have formed in equilibrium with the host magma and may either represent a marginal facies or a highly solidified magma body. In the latter case the host magma or part of it could be mobilized interstitial liquid. II. Allotriomorphic-hypidiomorphic tholeiitic olivine gabbro and diorite xenoliths with scarce Ti-pargasite which have undergone less than 10% partial melting in the host magma forming melts of alkali basaltic or Hekla andesite-like compositions dependent on the original mineral assemblage. Such liquids, enriched in K₂O and possibly other incompatible elements, may contaminate basaltic magmas rising slowly through a gabbroic lower crust. Large scale production of andesites by partial melting of such rocks is not possible but would need more hydrous or differentiated source rocks.     

介绍一个产生玄武岩的模型

地幔柱存在的一个主要证据是大规模高熔玄武岩省的出现,而且多认为玄武岩的来源依赖于地幔柱从下地幔输送。Michele Lustrino研究了造山时下地壳和岩石圈地幔的拆沉和拆离作用,提出了产生玄武岩的一个新模型。该模型认为即使地幔柱不存在,拆沉到地幔的下地壳物质再循环同样可以解释小规模的板内(大洋岛弧和大陆内部)火山岩和大洋、大陆溢流玄武岩及洋中脊玄武岩的生成及其常见的几种地球化学特征。在陆-陆碰撞过程中,下地壳中的变质反应生成石榴石,导致岩石的密度增大,致使过厚岩石圈底部(下地壳和岩石圈地幔)和上地壳分离并沉入上地幔。下地壳发生部分熔融形成富SiO2的熔体,和上涌的软流圈地幔(充填在下沉的岩石圈地幔和下地壳的空间)发生变质交代反应,导致具有强烈的地壳特点的富含斜方辉石层的形成。这个变质交代地幔体可以在拆沉后保持不变长达几个百万年。这种源的部分熔体可以保有下地壳的明显特征,产生类似富集地幔1型玄武岩浆作用。因此,该模型是提供了玄武岩浆来源的一个新选择。     

The Mordor Alkaline Igneous Complex,Central Australia: PGE-enriched disseminated sulfide layers in cumulates from a lamprophyric magma

The Mordor Alkaline Igneous Complex (MAIC) is a composite intrusion comprising a body of syenite and a funnel-shaped layered mafic–ultramafic intrusion of lamprophyric parentage, the Mordor Mafic–Ultramafic Intrusion or MMUI. The MMUI is highly unusual among intrusions of lamprophyric or potassic parentage in containing primary magmatic platinum-group element (PGE)-enriched sulfides. The MMUI sequence consists largely of phlogopite-rich pyroxenitic cumulates, with an inward dipping conformable layer of olivine-bearing cumulates divisible into a number of cyclic units. Stratiform-disseminated sulfide accumulations are of two types: disseminated layers at the base of cyclic units, with relatively high PGE tenors; and patchy PGE-poor disseminations within magnetite-bearing upper parts of cyclic units. Sulfide-enriched layers at cycle bases contain anomalous platinum group element contents with grades up to 1.5 g/t Pt+Pd+Au over 1-m intervals, returning to background values of low parts per billion (ppb) on a meter scale. They correspond to reversals in normal fractionation trends and are interpreted as the result of new magma influxes into a continuously replenished magma chamber. Basal layers have decoupled Cu and PGE peaks reflecting increasing PGE tenors up-section, due to increasing R factors during the replenishment episode, or progressive mixing of between resident PGE-poor magma and more PGE-enriched replenishing magma. The presence of PGE enriched sulfides in cumulates from a lamprophyric magma implies that low-degree partial melts do not necessarily leave sulfides and PGEs in the mantle restite during partial melting. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

造山带岩浆铜镍硫化物矿床的混染模式 ——以天山-北山二叠纪铜镍矿为例

造山带铜镍矿床的地幔源区均经历过不同程度的俯冲交代作用和复杂的源区混染历史,造山带铜镍矿带内大量个体差异的矿床为源区和壳内混染的多样性提供了研究实例.中亚造山带天山-北山地区是中国众多造山带内铜镍矿数量最多、分布最广、总体储量最大的地域,这些矿化岩体普遍体现Nb-Ta亏损、高18O和锆石O-Hf同位素离散的特征,该宏大...     

华北地台部分麻粒岩地体及包体的地球化学特征对比

华北地台麻粒岩包体（汉诺坝）与麻粒岩地体（西望山、蔓菁沟）存在明显的岩石地球化学特征差异，麻粒岩包体总体成分偏基性，麻粒岩地体总体成分偏长英质。形成时间、空间及构造背景的不同是造成成分差异的重要因素。汉诺坝麻粒岩包体是在拉线环境下玄武质岩浆底侵下地壳后结晶分异过程中堆晶作用的结果，其主、微量元素成分受控于辉石和斜长石堆晶的相对比例；下地壳物质的混染作用不是造成麻粒岩包体Nb、Ta、Th、U亏损的惟一因素，底侵的玄武质岩浆可能发生了含钛矿物相的结晶分离，造成了汉诺坝麻粒岩包体Nb、Ta亏损，而下地壳的麻粒岩相变质作用则使Th、U发生亏损。麻粒岩地体存在两种不同性质的微量元素组成，反映了两种不同构造环境的并置，是构造挤压抬升的结晶。     

Young bimodal volcanism at Medicine Lake volcanic center,northern California

The last 10,000 years of activity at the Medicine Lake volcanic center in northern California is characterized by bimodal mafic and siliceous volcanism. Interflow element variations are complex and exhibit a discontinuity for most elements between 57 and 62 per cent SiO₂. No simple linear or curvilinear element trends exist between the mafic (Modoc) and siliceous (glass) volcanics.The geochemical variation patterns exhibited by volcanic rocks from the Medicine Lake volcanic center preclude any simple model for magma origin involving either varying degrees of melting or of fractional crystallization. A model is tentatively invoked for the andesites and basalts involving ? 35 per cent melting of eclogite (of altered rise tholeiite composition) in a descending slab followed by varying amounts of fractional crystallization and perhaps magma mixing. Up to 20 per cent of shallow fractional crystallization of plagioclase and minor Ti-magnetite seems to be required by the Sr, Eu anomaly, and TiO₂ distributions.Compositional variation and high δO¹⁸ values in most dacite glass flows are best interpreted in terms of a crustal origin involving up to 50 per cent partial melting of average continental crust. Rhyolite glasses may have formed by small degrees of melting (20–30 per cent) of this crust followed by 5–10 per cent of shallow fractional crystallization (removing dominantly plagioclase) or by 40–50 per cent fractional crystallization of a dacite parent (~63 per cent SiO₂) produced in the crust. The shallow fractional crystallization is necessary to explain the low Sr contents and large negative Eu anomalies in the rhyolites. Dacites from the Composite Flow are tentatively interpreted to have formed by shallow mixing of a hybrid magma (composed of varying amounts of andesite and dacite) with rhyolite prior to and during eruption.     

Geochemical constraints on restite composition and unmixing in the Velay anatectic granite, French Massif Central

The main anatectic granite of the Velay complex is unique among major French Massif Central Hercynian granitoids in that rather than having an entirely lower crustal source, it formed by mixing between partial melts of the meta-igneous lower crust and ‘upper crustal’ country rock schists and orthogneisses. The geochemical variations in the Velay main anatectic granites cannot, however, be explained by mixing alone as their compositions range to lower SiO₂, with higher Al₂O₃, Fe₂O₃ and TiO₂ and lower Na₂O and CaO, than either end member in mixing. The variations are interpreted as being due to the presence of up to 35% restite in minimum melts of country rock compositions. Primary restites form equilibrium assemblages represented by biotite, ilmenite and surmicaceous enclaves which consist of biotite ± apatite, zircon and almandine. The main anatectic granites more rarely contain schist and gneiss enclaves, quartz resisters and plagioclase restites. Secondary restites are mainly represented by cordierite, and possibly K-feldspar, which formed by recrystallisation of primary biotite-rich restites. The unique characteristics of the Velay main anatectic granites are likely to be due, in part, to its late formation close to the end of the Hercynian orogeny. The metasedimentary lower crust may have become too refractory to yield large volumes of melt following partial melting to form the other major Massif Central granitoids. The heat necessary for partial melting at higher crustal levels was transferred from the lower crust by the intrusion of I-type granites and low volume diorites from the mantle. Upper crustal anatexis was mainly controlled by muscovite breakdown reactions (< 830 to 850 °C) and the liberation of water due to the recrystallisation of biotite to cordierite. The temperatures necessary for biotite breakdown were only achieved locally and resulted in the formation of high-LREE granites.