Microcracking in calcite and dolomite marble: microstructural influences and effects on properties

Microstructure‐based finite-element analysis with a microcracking algorithm was used to simulate an actual degradation phenomenon of marble structures, i.e., microcracking. Both microcrack initiation and crack propagation were characterized, as were their dependence on lattice preferred orientation (LPO), grain shape preferred orientation (SPO), grain size, marble composition (calcite and dolomite) and grain‐boundary fracture toughness. Two LPOs were analyzed: a random orientation distribution function and an orientation distribution function with strong directional crystalline texture generated from a March–Dollase distribution. Three SPOs were considered: equiaxed grains; elongated grains and a mixture of equiaxed and elongated grains. Three different grain sizes were considered: fine grains of order 200 μm (only calcitic marble); medium size grains of order 1 mm (calcitic and dolomitic marbles); and large grains of order 2 mm (only dolomitic marble). The fracture surface energy for the grain boundaries, γ_ig, was chosen to be 20 and 40 % of the fracture surface energy of a grain, γ_xtal, so that both intergranular and transgranular fracture were possible. Studies were performed on these idealized marble microstructures to elucidate the range of microcracking responses. Simulations were performed for both heating and cooling by 50 °C in steps of 1 °C. Microcracking results were correlated with the thermoelastic responses, which are indicators related to degradation. The results indicate that certain combinations of LPO, SPO, grain size, grain‐boundary fracture toughness and marble composition have a significant influence on the thermal-elastic response of marble. Microstructure with the smallest grain size and the highest degree of SPO and LPO had less of a tendency to microcrack. Additionally, with increasing SPO and LPO microcracking becomes more spatially anisotropic. A significant observation for all microstructures was an asymmetry in microcracking upon heating and cooling: more microcracking was observed upon cooling than upon heating. Given an identical microstructure and crystallographic texture, calcite showed larger thermal stresses than dolomite, had an earlier onset of microcracking upon heating and cooling, and a greater microcracked area at a given temperature differential. Thermal expansion coefficients with and without microcracking were also determined.     

Thermally-induced grain growth of calcite marbles on Naxos Island,Greece

The island of Naxos is composed of an elliptically shaped structural and thermal dome of Miocene age. Peak metamorphic temperatures within the central migmatite complex exceeded 700° C, decreasing to about 300° C at the most distant exposures on the island. Equigranular calcite marbles which outcrop together with metapelites and metabasites over the whole island show a systematic pattern of increasing grain-size towards the central migmatite complex, with a significant discontinuity in the pattern corresponding approximately with the 500° C isotherm. The microstructures and grain-size distributions in the marbles are consistent with normal grain-growth. The variation of grain-size with peak temperature attained can be explained equally well by the assumptions that (a) a maximum grainsize had developed, particularly at higher temperatures, or that (b) the grain-size had been frozen-in by a combination of cooling and coarsening, both of which combine to reduce the rate of grain-growth.The grain-size data do not impose strong constraints on the mechanism of transport of heat responsible for the metamorphism, whether by conduction or by advection, but the 500° C discontinuity indicates that the tectonothermal history of the migmatitic core and its envelope of metasediments were different.     

The lateral boundary of a metamorphic core complex: The Moutsounas shear zone on Naxos,Cyclades, Greece

We describe the structure, microstructures, texture and paleopiezometry of quartz-rich phyllites and marbles along N-trending Moutsounas shear zone at the eastern margin of the Naxos metamorphic core complex (MCC). Fabrics consistently indicate a top-to-the-NNE non-coaxial shear and formed during the main stage of updoming and exhumation between ca. 14 and 11 Ma of the Naxos MCC. The main stage of exhumation postdates the deposition of overlying Miocene sedimentary successions and predates the overlying Upper Miocene/Pliocene conglomerates. Detailed microstructural and textural analysis reveals that the movement along the Moutsounas shear zone is associated with a retrograde greenschist to subgreenschist facies overprint of the early higher-temperature rocks. Paleopiezometry on recrystallized quartz and calcite yields differential stresses of 20–77 MPa and a strain rate of 10⁻¹⁵–10⁻¹³ s⁻¹ at 350 °C for quartz and ca. 300 °C for calcite. Chlorite geothermometry of the shear zone yields two temperature regimes, 300–360 °C, and 200–250 °C. The lower temperature group is interpreted to result from late-stage hydrothermal overprint.     

海南岛西部戈枕含金剪切带花岗质糜棱岩中锆石SHRIMP U-Pb年代学及其地质意义

海南岛西部的中元古代抱板群混合岩主要沿北东向戈枕剪切带展布,近年来的研究逐渐揭示混合岩的原岩为花岗质岩石,是遭受强烈剪切作用改造的糜棱岩。本文选择土外山金矿的花岗质糜棱岩和不磨金矿的糜棱岩化花岗岩进行锆石SHRIMP U-Pb年代学测试,3件样品的锆石SHRIMP U-Pb谐和线年龄值分别为1439.1±8.4Ma(样品13JC-8-1,MSWD=0.85,n=14)、1436.9±8.3Ma(样品13JC-41,MSWD=0.54,n=10)和1448±13Ma(样品BM-3,MSWD=0.56,n=10),代表其原岩的侵位时代。结合研究区已有的研究成果,本文认为海南岛西部花岗质岩类和沿戈枕剪切带出露的糜棱岩原岩结晶年龄为~1450Ma,之后于~1400Ma经历一期构造-热变质事件;海南岛应为华夏地块的一部分,在Rodinia超大陆聚合前,华夏地块(包括海南岛,至少包括海南岛北西部)最有可能位于劳伦大陆南缘的西南延伸部分,华夏地块(包括海南岛)所经历的格林威尔造山事件可能较扬子板块偏早。     

Structures and fabrics in a crustal-scale shear zone,Betic Cordillera,SE Spain

A broad zone of dominantly ductile high-strain deformation lies beneath the Aguilón nappe in the Sierra Alhamilla, southern Spain. It forms part of a crustal-scale movement zone, traceable through much of the Betic Cordillera, which separates the Higher Betic Nappes from the underlying Nevado-Filabride Complex. The zone is characterized in outcrop by a distinctive platy foliation and a strong NNE-trending stretching lineation. Microstructural characteristics include quartz ribbons, mica fish, augen of feldspar and other minerals in a matrix of dynamically recrystallized quartz, and extensional crenulation cleavages. Narrow bands of ultramylonite and cataclasite occur within and on the margins of the movement zone. Deformation occurred under lower greenschist-facies conditions and was accompanied by retrogression of earlier higher-grade mineral assemblages.Structures in the movement zone developed in a temporal sequence, beginning with isoclinal folding and transposition of older foliations. This was followed by the formation of extensional crenulation cleavages, and the progressive localization of strain into the ultramylonite bands. Mylonitic foliation in these bands is deformed by syn-mylonite folds restricted to the bands. All these structures were then deformed by S- to SE-vergent small-scale folds restricted to the movement zone as a whole. Cataclasis, associated with alteration, is localized along the ultramylonite bands and indicates a transition to late-stage brittle deformation. The lower boundary of the movement zone is gradational: strain decreases, recrystallized grainsize and the degree of recrystallization of quartz increases, and pressure solution becomes the dominant deformation mechanism in mica-schist.Asymmetric quartz fabrics in the movement zone indicate a NNE sense of shear; but variations in the degree of asymmetry suggest that flow was partitioned, with the ultramylonite bands taking up much of the shear strain, and the intervening rocks deforming more slowly and with a lower degree of non-coaxiality. Diffuse fabrics in the fine-grained ultramylonite bands may indicate a switch to a grainsize-sensitive deformation mechanism, and an overall downward increase in the opening angle of crossed-girdle fabrics may reflect increased water activity at depth.     

西昆仑康西瓦韧性走滑剪切带的两类剪切指向、形成时限及其构造意义

详细的野外观察和显微构造研究表明，西昆仑南缘康西瓦韧性走滑剪切带主要由宽7km的孔兹岩质糜棱岩组成．具有早期自西向东的右行走滑剪切、后期自东向西的左行走滑剪切的剪切应变特征。韧性剪切带孔兹岩质糜棱岩中典型造岩矿物的晶格优选方位的电子背散射（EBSD）测量结果表明，钠长石具（010）[001]或（100）[001]滑移系，矽线石具{hk0}[001]滑移系，均反映了高温（〉650℃）和中-高温（650-550℃）的应变特征。差应力作用下的变质生长与剪切所致的刚性旋转进一步增加了矽线石的组构强度。然而。石英却具形成于中温→中低温→低温环境（〈550℃）的{10T0}〈a〉→{10il}〈a〉→{0001}〈a〉3组滑移系，均指示自东向西的左行剪切指向，EBSD组构的结果与野外剪切应变的判断一致。Ar／Ar同位素年代学及锆石SHRIMPU-Pb同位素定年结果表明，右行韧性走滑作用形成于加里东期（445～428Ma），继后的左行走滑作用主要经历了3次明显的构造热事件（250Ma、203Ma和101-125Ma）。在白垩纪时期。阿尔金左行走滑断裂和康西瓦左行走滑断裂连接成一条连续的巨型（长度2200km）走滑构造带．同时康西瓦走滑断裂和铁克里克逆冲断裂之间的挤压转换域的形成制约了青藏高原西北缘塔里木南部前陆盆地的发育。     

北京云蒙山变质核杂岩大水峪韧性剪切带的应变特征及构造意义

北京云蒙山变质核杂岩东南缘的大水峪韧性剪切带是认识云蒙山变质核杂岩构造演化的关键。本文通过变形温度区间估算、有限应变测量以及运动学涡度计算等手段对大水峪韧性剪切带的应变特征进行了系统分析。长石石英温度计与EBSD石英组构分析结果表明剪切带的变形温度区间为480~650℃。剪切带南西段的变形温度自北向南逐渐降低,北东段的变形温度由岩基向断层方向先降低后升高。有限应变测量结果指示剪切带的变形整体经受压扁作用为主,南西段的压扁程度与韧性位移量均大于北东段。运动学涡度的计算结果表明剪切带在形成过程中主要受纯剪切控制。南西段的运动学涡度自北向南逐渐增大,北东段的运动学涡度由岩基向断层方向先减小后增大。据此认为岩浆作用是导致云蒙山变质核杂岩形成的主导因素,大水峪韧性剪切带北东段的拆离过程可能受到了东侧岩体的阻挡。

     

秦岭沙沟街韧性剪切带的岩石磁学、磁组构和运动学涡度分析

秦岭商丹构造带内发育的晚三叠世沙沟街韧性剪切带蕴含大量地质信息,很好地记录了秦岭印支期碰撞造山过程。为了探究该剪切带的运动学特征及其动力学背景,在野外观测、显微构造分析的基础上,对其中发育的糜棱岩进行了磁组构和运动学涡度研究。岩石磁学和磁组构分析结果显示:样品的平均磁化率Km值总体较高,载磁矿物主要为磁铁矿等铁磁性矿物;磁化率各向异性度PJ值较大,表明构造变形较为强烈;形态参数T值多大于0,反映磁化率椭球体以扁球体为主;磁线、面理优势产状与野外观测到的矿物线、面理较为一致。结合磁组构、边界断层以及C面理产状,认为沙沟街韧性剪切带具有左行走滑挤压的运动学特征。运动学涡度Wk值及其分布特征表明,沙沟街剪切带中纯剪切作用所占的比重总体大于简单剪切作用,并且剪切带的核部应位于北界断层附近。综合分析认为,沙沟街韧性剪切带的运动学特征反映了总体斜向汇聚背景下的局部走滑挤压,与商丹带西段发育的同期韧性剪切带具有完全反向的运动学指向,这可能与碰撞导致的侧向挤出构造有关     

Progressive development of quartz fabrics in a shear zone from Monte Mucrone,Sesia-Lanzo Zone,Italian Alps

Quartz c-axis fabrics are described from a shear zone in a jadeite — garnet bearing meta-granite from Monte Mucrone, in the Sesia-Lanzo Zone of the western Italian Alps. Quartz blebs in the meta-granitoid are progressively deformed into cigar shaped lenses, and are recrystallized. Fabrics measured from individual blebs show considerable variation resulting from an initial orientation effect, and are not very enlightening. A synoptic diagram, however, has a pole-free area which can be correlated with the extension direction, and an asymmetry which is consistent with the known sense of shear operating in the zone.Although the technique of preparing synoptic diagrams is rather painstaking, its use is advocated for complex fabric situations, as it may allow partial removal of problems associated with non-random initial orientation distributions.     

Evolution and stratigraphy of a regressive barrier/backbarrier complex: Kiawah Island, South Carolina

Analysis of 75 vibracores from the backbarrier region of Kiawah Island, South Carolina reveals a complex association of three distinct stratigraphic sequences. Beach ridge progradation and orientation-controlled backbarrier development during the evolution of Kiawah Island, and resulted in deposition of: (1) a mud-rich central backbarrier sequence consisting of low marsh overlying fine-grained, tidal flat/lagoonal mud; (2) a sandy beach-ridge swale sequence consisting of high and low marsh overlying tidal creek channel and point bar sand, and foreshore/shoreface; and (3) a regressive sequence of sandy, mixed, and muddy tidal flats capped by salt marsh that occurs on the updrift end of the island. Central backbarrier deposits formed as a result of the development of the initial beach ridge on Kiawah Island. Formation of this beach ridge created a backbarrier lagoon in which fine-grained estuarine and tidal flat mud accumulated. Washovers, oyster mounds, and tidal creek deposits form isolated sand and/or shell-rich lenses in the lagoon. Spartina alterniflora low marsh prograded into the lagoon as the tidal flats aggraded. Barrier progradation and sediment bar-bypassing at Stono Inlet created digitate beach ridges on the northeast end of Kiawah Island. Within the beach-ridge swales, tidal flats were disconformably deposited on shoreface and foreshore sand of the older beach ridges. Tidal creek drainage systems evolved to drain the swales. These rapidly migrating creeks reworked the tidal flat, foreshore, and shoreface sediments while redepositing a fining-upward sequence of channel lag and point bar deposits, which served as a substrate for salt marsh colonization. This resultant regressive sedimentary package marks the culmination of barrier island development and estuary infilling. Given enough time and sedimentation, the backbarrier sequence will ultimately prograde over the barrier island, reworking dune, beach, and foreshore sediments to form the upper sand-rich bounding surface of the barrier lithosome. Preservation of the regressive sequence is dependent upon sediment supply and the relative rate of sea-level rise, but the reworking of barrier islands by tidal inlets and migrating tidal creeks greatly alter and complicate the stratigraphic sequence.     

郯庐断裂带肥东桃源韧性剪切带构造分析及时限探究

郯庐断裂带在肥东桃源地区为一混合杂岩带,温压数据显示区域内变形变质环境为中下地壳构造环境。本文对剪切带的应变大小、应变速率、涡度以及应力场等构造特征进行分析测量,结果显示该剪切带所受应力方向为170°左右,夹角为40°～50°,并以简单剪切为主,其变形矿物被拉长。此外,带内发育的长英质糜棱岩流体以及伟晶岩流体均发生同构造变形,本文结合前期年代学研究结果,整合出了3种不同流体之间的关系,并有效限定出带内韧性剪切活动发生在140～124 Ma之间。同时,通过对郯庐断裂带中南段年代学数据统计,发现郯庐断裂带肥东段主要记录了早白垩世的剪切活动,而大别造山带东缘、苏鲁西缘分别记录了同造山年代学数据,断裂带中南段在年代学分布上呈现出明显的空间差异性,反映出郯庐断裂带递进变形的特征。     

Structural geometry and kinematics of the Ailao Shan shear zone: insights from integrated structural,microstructural, and fabric studies of the Yao Shan complex,Yunnan, Southwest China

ABSTRACT

The Yao Shan complex, a massif near the southern segment of the Ailao Shan–Red River (ASRR) shear zone, bears important information on the structural framework of the massif and the kinematics of ductile shearing along the ASRR shear zone. In this contribution, structural, microstructural, quartz c-axis fabric, magnetic fabric, and geochronologic data are used to determine the structural framework of the Yao Shan massif and its tectonic implications for the ASRR shear zone. The Yao Shan complex is characterized by an overall linear A-type antiform that contains a core of high-grade metamorphic rocks with Palaeoproterozoic to Mesozoic protoliths and a mantle of Permo-Triassic low-grade rocks. Both the high-grade metamorphic core and low-grade Permo-Triassic rocks have experienced progressive ductile shearing. Anisotropy of magnetic susceptibility (AMS) results from 17 samples collected along the Xinjie–Pingbian section across the complex show that magnetic lineation (K_max) and foliation (K_max–K_int) are generally subparallel to the corresponding structural elements in the sheared rocks. The shape parameter E values of the magnetic ellipsoids are indicative of dominantly oblate and plane strain, but vary with protolith type and degree of strain among the various rock types. In agreement with the field and microstructural observations, the corrected degree of anisotropy (Pj) values reflect high shear strain in the core rocks and relatively low shear strain in the low-grade strata. A kinematic analysis based on structural and magnetic fabric data shows that both left- and right-lateral shear occurred during the deformation of the Yao Shan complex. Therefore, instead of being an element of the ASRR shear zone, the Yao Shan complex constitutes a crustal-scale inharmonic A-type fold with a fold axis parallel to the stretching lineation. Geochronologic data reveal that the folding occurred coevally with ductile shearing of the middle to lower crust between ca. 30 and 21 Ma.     

Evolution of zircon deformation mechanisms in a shear zone (Lanzo massif,Western-Alps)

Magmatic zircons within two sheared gabbroic dykes from the peridotitic massif of Lanzo (Western-Alps, Italy) revealed evolution of deformation from crystal plasticity to rigid body rotation during shear zone evolution. This is the first time that multiple zircon grains have been analysed in a kinematic context in a shear zone. Zircon grains recorded crystal plastic deformation activating the commonly inferred <100>{001} and <001>{100} glide-systems to the newly identified <001>{110} glide-system. The exact selection of glide-system could be dependant of deformation conditions such as pressure, temperature, and strain rate. Moreover, the activation of one or several glide-systems within a single grain could be favoured by the primary orientation of the grains combined with a high strain rate. In these sheared gabbros, the deformation mechanisms evolve from plastic deformation at low strain rate conditions to increase strain, strain softening and localisation of deformation. The progressive shear zone development and the softening of the matrix relative to the zircon has lead to a switch from crystal-plasticity to rigid body rotation of zircon. The zircon grains rigid body rotation involved that their long axes became parallel to the lineation of the shear zone, causing reorientation and dispersion of the misorientation axes away from kinematic Y.     

广东河台金矿田糜棱岩磁组构对剪切带变形与成矿的约束

河台金矿田是广东省内规模最大的金矿,由于金矿床都产于糜棱岩带中,因而被认为是典型的与剪切带有关的金矿。然而,对于Au矿化与剪切带变形条件之间的关系目前仍不十分清楚。高村和云西是河台金矿田两个代表性的金矿床,分别受ML11和ML9两条剪切带的控制。本文在对两条剪切带中的含矿和无矿糜棱岩的变形特征进行野外调查和室内岩（矿）相学观察的基础上,分别开展岩石磁学和磁化率各向异性（AMS）特征研究。糜棱岩x- T曲线显示了磁黄铁矿的居里温度,结合磁滞回线、等温剩磁（IRM）以及矿相学特征,表明河台金矿田糜棱岩几乎不含磁铁矿,载磁矿物主要为黑云母和磁黄铁矿,但是磁黄铁矿的贡献要远大于黑云母。两条糜棱岩带中不含矿糜棱岩的平均磁化率Km＜500×10-6 (SI)、磁化率各向异性度Pj、椭球体形状参数T、磁面理F和磁线理L没有明显差别。并且形成两条剪切带的主应力方向也近于一致,最大主应力方向σ1（K3）为近水平NNW- SSE向,最小主应力σ3（K1）为NEE- SWW向,倾伏角较缓。运动学涡度Wk值也近似,在0. 12~0. 65之间,小于0. 71。上述特征暗示两条含金剪切带都是在印支期NNW- SSE向近水平的强烈挤压作用下形成的,其中发育的糜棱岩为S型和SL型构造岩,具有强烈压扁的特征,并且在剪切变形过程中纯剪切作用所占的比重要明显大于简单剪切。然而,两条剪切带中含矿糜棱岩与无矿糜棱岩的AMS特征有明显的区别。含矿糜棱岩的K1近于直立,且Km＞500×10-6 (SI)和Pj值都明显大于无矿糜棱岩。因此,糜棱岩的变形强度与含矿性具有一定的正相关关系,而在燕山期叠加的脆韧性变形使得最大磁化率主轴（即最小主应力轴）变陡,更有利于热液的运移和最终成矿。     

西藏日土县阿汝村东剪切带型铜金矿的发现、地质特征及意义

研究区位于著名的班公湖—怒江成矿带上的扎普—多不杂 Fe‐Cu‐Au 成矿亚带内,大地构造位于班—怒结合带北侧,成矿地质条件极为有利,但地质工作程度却较低。本文在1∶50000区域地质矿产调查工作成果的基础上,论述新发现的阿汝村东剪切带型铜金矿的地质特征及意义。结果表明,该铜金矿的成矿地质条件较好,共9条达工业品位的铜金矿体,伴生有用组份主要为 Ag 、Pb 、Zn ,矿体主要赋存于燕山期韧性剪切带中。该铜金矿的发现,对该地区剪切带型铜金矿的研究与找矿具有参考价值。     

内蒙古察右后旗三道沟一带韧性剪切带磁组构特征及其构造意义

变形岩石的磁组构参数K1、K2、K3、P、T、F、L、E等可以用来定量地分析和了解构造变形的性状。笔者对分布于察哈尔右翼后旗三道沟一带的构造岩进行磁组构特征研究发现:E值多大于1,或接近于1;T值大于0的明显多于小于0的;P值均大于1,而以F和L的对数值为轴所作的变型弗林图解中数据主要集中在剪切区和压扁区。上述结果表明磁化率椭球体主要表现为磁面理较磁线理发育的压扁型椭球体,三道沟一带韧性剪切带的构造岩石经历了力学机制为挤压剪切的强烈构造活动。这种由磁组构揭示的应力应变特征得到了野外露头及显微构造的佐证。     

龙泉关剪切带眼球状花岗质片麻岩锆石U-Pb年代学和Lu-Hf同位素特征及其地质意义

恒山五台阜平地区地处华北克拉通中部造山带的中段,早前寒武纪地体出露较好,是解析华北克拉通早前寒武纪演化过程的最佳地段。龙泉关剪切带位于五台杂岩和阜平杂岩的交接部位,其主要岩石类型为眼球状花岗质片麻岩、变粒岩和斜长角闪岩。本文利用LA-ICP-MS方法对龙泉关剪切带中的眼球状花岗质片麻岩进行了锆石U-Pb年龄和Lu-Hf同位素的测试。结果显示,龙泉关眼球状花岗质片麻岩原岩结晶年龄为(2 547±7) Ma,其εHf(t)值介于+2.7~+9.2,表明其源区主要为相对年轻的地壳物质,与五台地区新太古代花岗岩非常相似。龙泉关花岗质眼球状片麻岩中锆石两阶段Hf模式年龄(TDM2)为2 477~2 872 Ma,具有2.58 Ga、2.71 Ga和2.81 Ga三个峰值,记录了华北克拉通新太古代初始地壳生长事件。     

Evolution of Ataúro Island: Temporal constraints on subduction processes beneath the Wetar zone, Banda Arc

Ataúro is a key to understanding the late stage volcanic and subduction history of the Banda Arc to the north of Timor. A volcanic history of bi-modal subaqueous volcanism has been established and new whole rock and trace element geochemical data show two compositional groups, basaltic andesite and dacite–rhyolite. ⁴⁰Ar/³⁹Ar geochronology of hornblende from rhyo-dacitic lavas confirms that volcanism continued until 3.3 Ma. Following the cessation of volcanism, coral reef marine terraces have been uplifted to elevations of 700 m above sea level. Continuity of the terraces at constant elevations around the island reflects regional-scale uplift most likely linked to sublithospheric processes such as slab detachment. Local scale landscape features of the eastern parts of Ataúro are strongly controlled by normal faults. The continuation of arc-related volcanism on Ataúro until at least 3.3 Ma suggests that subduction of Australian lithosphere continued until near this time. This data is consistent with findings from the earthquake record where the extent of the Wetar seismic gap to a depth of 350 km suggests slab breakoff, as a result of collision, commenced at ∼4 Ma, leading to subsequent regional uplift recorded in elevated terraces on Ataúro and neighbouring islands.     

甘肃华家岭—葫芦河一带韧性剪切带的发现及其地质意义

华家岭-葫芦河韧性剪切带呈NWW走向,属北祁连造山带与中祁连地块分界断裂,通过对其几何学、运动学、动力学等分析研究,认为峰期变形系加里东末期南北两大板块汇聚碰撞,拼合于华北板块南缘的软质陆壳(北祁连)向南侧刚性的中祁连地块斜向逆冲叠覆,从而产生自NEE向SWW兼右行走滑的逆冲式韧性剪切活动。