Sequence stratigraphy of a Middle to Upper Ordovician foreland succession (Ottawa Embayment,central Canada): Evidence for tectonic control on sequence architecture along southern Laurentia

The Middle to Upper Ordovician foreland succession of the Ottawa Embayment in central Canada is divided into nine transgressive‐regressive sequences that defines net deepening of a platform succession over ~15 m.y. from peritidal to outer ramp settings, then a return to peritidal conditions over ~3 m.y. related to basin filling by orogen‐derived siliciclastics. With a backdrop of net eustatic rise through the Middle to Late Ordovician, there are several different expressions of structural influence on sequence development in the embayment. During the Middle Ordovician (Darriwilian), foreland‐basin initiation was marked by regional onlap with abundant synsedimentary deformation across a faulted trailing‐margin platform interior; subsequent craton‐interior uplift resulted in voluminous influx of siliciclastics contemporary with local structurally influenced local channelization; then, a formation of a platform‐interior shale basin defines continued intrabasin tectonism. During the Late Ordovician (Sandbian, early Katian), structural influence was superimposed on sea‐level rise as indicated by renewed local development of a platform‐interior shale basin; differential subsidence and thickness variation of platform carbonate successions; abrupt deepening across shallow‐water shoal facies; and, micrograben development coincident with foreland‐platform drowning. These stratigraphic patterns are far‐field expressions of distal orogen development amplified in the platform interior through basement reactivation along an inherited buried Precambrian fault system. Comparison of Upper Ordovician (Sandbian‐lower Katian) sequence stratigraphy in the Ottawa Embayment with eustatic frameworks defined for the Appalachian Basin reveals greater regional variation associated with Sandbian sequences compared to regional commonality in base level through the early Katian.     

Late Ordovician,deep‐water gravity‐flow deposits,palaeogeography and tectonic setting,Tarim Basin,Northwest China

The Upper Ordovician in the Tarim Basin contains 5000–7000 m of siliciclastic and calciclastic deep‐water, gravity‐flow deposits. Their depositional architecture and palaeogeographical setting are documented in this investigation based on an integrated analysis of seismic, borehole and outcrop data. Six gravity‐flow depositional–palaeogeomorphological elements have been identified as follows: submarine canyon or deeply incised channels, broad and shallow erosional channels, erosional–depositional channel and levee–overbank complexes, frontal splays‐lobes and nonchannelized sheets, calciclastic lower slope fans and channel lobes or sheets, and debris‐flow complexes. Gravity‐flow deposits of the Sangtamu and Tierekeawati formations comprise a regional transgressive‐regressive megacycle, which can be further classified into six sequences bounded by unconformities and their correlative conformities. A series of incised valleys or canyons and erosional–depositional channels are identifiable along the major sequence boundaries which might have been formed as the result of global sea‐level falls. The depositional architecture of sequences varies from the upper slope to abyssal basin plain. Palaeogeographical patterns and distribution of the gravity‐flow deposits in the basin can be related to the change in tectonic setting from a passive continental margin in the Cambrian and Early to Middle Ordovician to a retroarc foreland setting in the Late Ordovician. More than 3000 m of siliciclastic submarine‐fan deposits accumulated in south‐eastern Tangguzibasi and north‐eastern Manjiaer depressions. Sedimentary units thin onto intrabasinal palaeotopographical highs of forebulge origin and thicken into backbulge depocentres. Sediments were sourced predominantly from arc terranes in the south‐east and the north‐east. Slide and mass‐transport complexes and a series of debris‐flow and turbidite deposits developed along the toes of unstable slopes on the margins of the deep‐water basins. Turbidite sandstones of channel‐fill and frontal‐splay origin and turbidite lobes comprise potential stratigraphic hydrocarbon reservoirs in the basin.     

Sequence architecture and depositional evolution of the northern continental slope of the South China Sea: responses to tectonic processes and changes in sea level

The continental slopes of the South China Sea (SCS), the largest marginal sea on the continental shelf of Southeast Asia, are among the most significant shelf‐margin basins in the world because of their abundant petroleum resources and a developmental history related to sea floor spreading since Late Oligocene time. Based on integrated analyses of seismic, well‐logging and core data, we systematically document the sequence architecture and depositional evolution of the northern continental slope of the SCS and reveal its responses to tectonism, sea‐level change and sediment supply. The infill of this shelf‐margin basin can be divided into seven composite sequences (CS1–CS7) that are bounded by regional unconformities. Composite sequences CS3 to CS7 have formed since Late Oligocene time, and each of them generally reflects a regional transgressive–regressive cycle. These large cycles can be further divided into 20 sequences that are defined by local unconformities or transgressive–regressive boundaries. Depositional–geomorphological systems represented on the continental slope mainly include shelf‐edge deltas, prodelta‐slope fans, clinoforms of the shelf‐margin slope, unidirectionally migrating slope channels, incised slope valleys, muddy slope fans, slope slump‐debris‐flow complexes and large‐scale soft‐sediment deformation of bedding. Changing sea levels, reflected by evidence from sequence architecture in the study area, are generally comparable with those of the Haq (1987) global sea level curve, whereas the regional transgressions and regressions were apparently controlled by tectonic uplift and subsidence. Composite sequences CS3 and CS4 formed from Late Oligocene to Middle Miocene time and represent continental‐slope deposition during a time of northwest‐northeast seafloor spreading and subsequent development of sub‐basins in the southwest‐central SCS. The development of composite sequences CS5 to CS7 after Middle Miocene time was obviously influenced by the Dongsha Movement during convergence between the SCS and Philippine Sea plates. Climatic variations and monsoon intensification may have enhanced sediment supply during Late Oligocene‒Early Miocene (25–21 Ma) and Late Pliocene‒Pleistocene (3–0.8 Ma) times. This study indicates that shelf‐edge delta and associated slope fan systems are the most important oil/gas‐bearing reservoirs in the SCS continental‐slope area.     

Distinguishing fault reactivation from flexural deformation in the distal stratigraphy of the Peripheral Blountian Foreland Basin, southern Appalachians, USA

Reactivation of intraplate structures and weak zones within the foreland lithosphere disrupt the modelled geometry and pattern of migration of the flexural wave in foreland basins. In the southern Appalachians (USA), the Middle Ordovician unconformity, irregular Middle Ordovician distal foreland deposition and backstepping of Middle–lower Upper Ordovician carbonate strata have been related to migration of the flexural wave. However, integration of stratigraphy, tectonic subsidence history and composition of palinspastically restored distal foreland strata, using a map of subsurface basement structures as reference, allows us to distinguish an early event of inversion from two events of flexural migration. Sections restoring at very short distances outside the boundaries of a former basement graben have the youngest passive‐margin strata preserved beneath Middle Ordovician (～466 Ma) peritidal to deep lagoonal carbonates with gravel‐size chert clasts. In contrast, sections restoring inside the graben record >470 m of truncation of pre‐Middle Ordovician passive‐margin strata, late onset of deposition (～456 Ma), and subaerial features in carbonate and siliciclastic strata. The lacuna geometry and early patterns of distal foreland uplift and carbonate deposition indicate that inversion of a basement graben in response to Middle Ordovician convergence, rather than a migrating or semi‐fixed forebulge, was the primary control on the early evolution of the distal foreland. Drowning of the carbonate platform in more proximal settings, northeastward onset of deposition on upthrown blocks, and thick accumulation of carbonates in downthrown blocks record northwestward and northeastward flexural wave migration at the Middle–Late Ordovician boundary. In early Late Ordovician, the overall shoaling of carbonate and siliciclastic depocentres and the rise of tectonic subsidence curves indicate hinterlandward migration of flexural uplift. Both events of flexural migration were accompanied by influx of volcanic ash and synorogenic sediments.     

Interaction of tectonics, eustasy, climate and carbonate production on the sedimentary evolution of an early/middle Jurassic extensional basin (Southern Provence Sub-basin, SE France)

This paper describes the evolution of an extensional basin in regard to the nature and sequence stratigraphic arrangement of its carbonate deposits. The purpose of this study is to evaluate the respective effects of tectonism, eustasy, climate and oceanography on a carbonate sedimentary record. The case study is the early to mid‐Jurassic age carbonate succession of the Southern Provence Sub‐basin (SE France), located within the southern part of the extensional Western European Tethyan Margin. This work is based on sedimentologic, biostratigraphic (using ammonites and brachiopods) and sequence stratigraphic analysis of the carbonate facies of the Cherty Reddish Limestone Formation (late Sinemurian to earliest Bajocian). These strata were deposited in shoreface to lower offshore depositional environments. The succession of the various environments together with the recognition of key stratigraphic surfaces allow us to define four second‐order depositional sequences; of late Sinemurian to earliest Pliensbachian, early Pliensbachian to late Pliensbachian, earliest Toarcian to middle Aalenian and late Aalenian to early Bathonian ages. The architecture of the depositional sequences (thickness and facies variations within the systems tracts, wedge‐shaped geometries) reflects a strong tectonic control. The sub‐basin was structured by extensional faults (oriented approximately 070–090/250–270). Sea‐level variations, fluctuations in carbonate production and preservation, and environmental changes were also significant controlling factors of the carbonate deposition. The interplay of the tectonic control with the other factors resulted in five main phases in the sedimentary evolution of the sub‐basin: (1) dominant tectonic control during the initial rifting stage (late Sinemurian to early Pliensbachian); (2) increasing extensional tectonics (mid‐Pliensbachian); (3) global climato‐eustatic sea‐level fall (latest Pliensbachian) and global climato‐eustatic sea‐level rise plus hypoxia/anoxia (early Toarcian); (4) relative sea‐level fall linked to tectonic uplift related to the ‘Mid‐Cimmerian phase’ (mid‐Aalenian) and (5) oceanographic events (upwelling) and reduction in carbonate production (hypoxia/anoxia) plus tectonic downwarping (late Aalenian/earliest Bajocian).     

Neoproterozoic–Devonian stratigraphic evolution of the eastern Murzuq Basin,Libya: a tale of tilting in the central Sahara

The Murzuq Basin is one of the most petroliferous basins of North Africa. Its remote eastern flank has been largely ignored since early reconnaissance work in the 1950s and 1960s. This article presents new stratigraphic and sedimentological data on the Neoproterozoic through Devonian succession from the Mourizidie and Dor el Gussa regions. The Neoproterozoic to Cambrian Mourizidie and Hasawnah formations in the eastern part of the Mourizidie region dip to the east and north‐east, resting directly on late Precambrian metasediments and granitoids. These strata record the initial progradation of sand‐dominated braidplain systems upon peneplained Precambrian basement. Rhyolite clasts in the Hasawnah Formation may record tectonically driven uplift and unroofing in the southern Tibesti Massif or tectonomagmatic rejuvenation to the south of this massif. In the western part of the Mourizidie region, Late Ordovician through Silurian strata (Mamuniyat and Tanezzuft–Akakus formations) directly overlie late Precambrian metasediments and granitoids, and dip at a low angle towards the west into the Murzuq Basin. Elsewhere at the eastern Murzuq Basin flank, in Dor el Gussa, Late Ordovician glaciogenic sediments rest with angular unconformity upon shallow marine sandstones of Cambrian–Ordovician age. This angular unconformity may also occur in the Mourizidie region and indicates widespread tectonism, either as a result of a Middle–Late Ordovician orogenic event, far‐field tectonism related to the opening of the Rheic Ocean along the northern margin of Gondwana or alternatively crustal depression associated with the growth of Late Ordovician ice sheets. Unconformity development was also probably associated with glacial incision. Following ice sheet retreat, isostatic rebound during deglaciation resulted in uplift of tens to hundreds of metres, locally removing all Cambrian and Ordovician formations. Rising sea levels in the Silurian led to deposition of the Tanezzuft Formation on Precambrian basement in the northwestern Mourizidie region.     

Upper Triassic – Jurassic sequence stratigraphy and its structural controls in the western Ordos Basin, China

Upper Triassic, Lower–Middle Jurassic and Upper Jurassic strata in the western Ordos Basin of North China are interpreted as three unconformity-bounded basin phases, BP-4, BP-5 and BP-6, respectively. The three basin phases were deposited in three kinds of predominantly continental basin: (1) a Late Triassic composite basin with a south-western foreland subbasin and a north-western rift subbasin, (2) an Early–Middle Jurassic sag basin and (3) a Late Jurassic foreland molasse wedge. Within the Late Triassic composite basin BP-4 includes three sequences, S4-1, S4-2 and S4-3. In the south-western foreland subbasin, the three sequences are the depositional response to three episodes of thrust load subsidence, and are mainly composed of alluvial fan, steep-sloped lacustrine delta and fluvial systems in front of a thrust fault-bounded basin flank. In the north-western rift subbasin, the three sequences are the depositional response to three episodes of rift subsidence, and consist of alluvial fan – braid plain and fan delta systems basinward of a normal fault-bounded basin margin. In the sag basin BP-5 includes four sequences, S5-1, S5-2, S5-3 and S5-4, which reflect four episodes of intracratonic sagging events and mainly consist of fluvial, gentle-gradient lacustrine delta and lacustrine systems sourced from peripheral uplifted flanks. BP-6, deposited in the foreland-type basin, includes one sequence, S6-1, which is the depositional response to thrust load subsidence and is composed of alluvial fan systems. The formation and development of these three kinds of basins was controlled by Late Triassic and Jurassic multi-episode tectonism of basin-bounding orogenic belts, which were mainly driven by collision of the North China and South China blocks and subduction of the western Pacific plate.     

Carbonate sedimentation in a starved pull-apart basin, Middle to Late Devonian, southern Guilin, South China

ABSTRACT Geological mapping and sedimentological investigations in the Guilin region, South China, have revealed a spindle‐ to rhomb‐shaped basin filled with Devonian shallow‐ to deep‐water carbonates. This Yangshuo Basin is interpreted as a pull‐apart basin created through secondary, synthetic strike‐slip faulting induced by major NNE–SSW‐trending, sinistral strike‐slip fault zones. These fault zones were initially reactivated along intracontinental basement faults in the course of northward migration of the South China continent. The nearly N–S‐trending margins of the Yangshuo Basin, approximately coinciding with the strike of regional fault zones, were related to the master strike‐slip faults; the NW–SE‐trending margins were related to parallel, oblique‐slip extensional faults. Nine depositional sequences recognized in Givetian through Frasnian strata can be grouped into three sequence sets (Sequences 1–2, 3–5 and 6–9), reflecting three major phases of basin evolution. During basin nucleation, most basin margins were dominated by stromatoporoid biostromes and bioherms, upon a low‐gradient shelf. Only at the steep, fault‐controlled, eastern margin were thick stromatoporoid reefs developed. The subsequent progressive offset and pull‐apart of the master strike‐slip faults during the late Givetian intensified the differential subsidence and produced a spindle‐shaped basin. The accelerated subsidence of the basin centre led to sediment starvation, reduced current circulation and increased environmental stress, leading to the extensive development of microbial buildups on platform margins and laminites in the basin centre. Stromatoporoid reefs only survived along the windward, eastern margin for a short time. The architectures of the basin margins varied from aggradation (or slightly backstepping) in windward positions (eastern and northern margins) to moderate progradation in leeward positions. A relay ramp was present in the north‐west corner between the northern oblique fault zone and the proximal part of the western master fault. In the latest Givetian (corresponding to the top of Sequence 5), a sudden subsidence of the basin induced by further offset of the strike‐slip faults was accompanied by the rapid uplift of surrounding carbonate platforms, causing considerable platform‐margin collapse, slope erosion, basin deepening and the demise of the microbialites. Afterwards, stromatoporoid reefs were only locally restored on topographic highs along the windward margin. However, a subsequent, more intense basin subsidence in the early Frasnian (top of Sequence 6), which was accompanied by a further sharp uplift of platforms, caused more profound slope erosion and platform backstepping. Poor circulation and oxygen‐depleted waters in the now much deeper basin centre led to the deposition of chert, with silica supplied by hydrothermal fluids through deep‐seated faults. Two ‘subdeeps’ were diagonally arranged in the distal parts of the master faults, and the relay ramp was destroyed. At this time, all basin margins except the western one evolved into erosional types with gullies through which granular platform sediments were transported by gravity flows to the basin. This situation persisted into the latest Frasnian. This case history shows that the carbonate platform architecture and evolution in a pull‐apart basin were not only strongly controlled by the tectonic activity, but also influenced by the oceanographic setting (i.e. windward vs. leeward) and environmental factors.     

The Pleistocene tectono‐‐sedimentary evolution of the Apenninic foreland basin between Trigno and Fortore rivers (Southern Italy) through a sequence‐stratigraphic perspective

A basin‐scale, integrated approach, including sedimentological, geomorphological and soil data, enables the reliable reconstruction of the infilling history of the southern Apenninic foredeep, with its subsequent inclusion in the wedge‐top of the foreland basin system. An example is shown from the Molise‐Apulian Apennines (Southern Italy), between Trigno and Fortore rivers, where the Pleistocene tectono‐sedimentary evolution of the basin is framed into a sequence‐stratigraphic scheme. Specifically, within the traditional subdivision into Quaternary marine (Qm) and Quaternary continental (Qc) depositional cycles, five third‐order depositional sequences (Qm1, Qm2, Qc1, Qc2 and Qc3) are identified based on recognition of four major stratigraphic discontinuities. The lower sequence boundaries are represented by angular unconformities or abrupt facies shifts and are generally associated with distinctive pedological and geomorphological features. Three paleosols, observed at top of depositional sequences Qm2, Qc1 and Qc2, represent pedostratigraphic markers that can be tracked basinwide. The geomorphological response to major tectono‐sedimentary events is marked by a series of paleosurfaces with erosional, depositional and complex characteristics. Detailed investigation of the relationships between stratigraphic architecture and development of unconformities, paleosols and paleosurfaces suggests that the four sequence boundaries were formed in response to four geomorphological phases/tectonic events which affected the basin during the Quaternary. The first three tectonic events (Lower‐Middle Pleistocene), marking the lower boundaries of sequences Qm2, Qc1 and Qc2, respectively, are interpreted to be related to the tectonic regime that characterized the last phase of thrusting recorded in the Southern Apennines. In contrast, sequence Qc3 does not display evidence of thrust tectonics and accumulated as a result of a phase of regional uplift starting with the Middle Pleistocene.     

Long-term Callovian–Oxfordian sea-level changes and sedimentation in the Iberian carbonate platform (Jurassic, Spain): possible eustatic implications

Facies analysis across the carbonate platform developed during the Callovian–Oxfordian in the northern Iberian basin (Jurassic, Northeast Spain) is used to characterize successive stages of sedimentary evolution, including palaeoenvironmental reconstructions showing the distribution of a wide spectrum of facies, from ferruginous oolitic, peloidal, spongiolithic to intraclastic. The studied successions consist of two long‐term transgressive–regressive cycles bounded by a major unconformity with a major gap, comprising at least the upper Lamberti (Callovian) and Mariae (Oxfordian) Zones. Major transgressive peaks of these two cycles occurred at the end of the Early Callovian (late Gracilis Zone) and at the end of the Middle Oxfordian. The Callovian and Oxfordian successions were further divided into three and seven higher frequency cycles, respectively. The modelling of two sections (i.e. Ricla and Tosos) located 40 km apart in the more subsident open platform areas, allows the reconstruction of two curves showing a similar evolution of long‐term sea‐level changes that are in theory eustatic, though subject to uncertainties derived form the assumptions required for their construction. The changes affecting the northern Iberian basin seem to reflect nearly homogeneous subsidence (rates around 2 cm kyr^?1) combined with possible eustatic changes including an Early Callovian rise, a fall at the middle Callovian–earliest Oxfordian (i.e. the Anceps–Mariae Zones), with average long‐term rates around 2 cm kyr^?1 (total fall of 40–60 m), a period of lowstand at the Early–Middle Oxfordian transition and a long‐term rise at the Middle–Late Oxfordian transition (Transversarium and Bifurcatus Zones). Facies distribution across the Iberian platform indicates a progressive Middle–Late Callovian relative sea‐level fall rather than a rapid relative sea‐level fall at the end of the Callovian. After this falling episode, the progressive onlap over the swell areas during the Early Oxfordian and at the beginning of the Middle Oxfordian indicates a period of accommodation gain, which is explained by the combined effects of continuous subsidence across the platform and reduced sedimentation rates in spite of the possible eustatic lowstand. Eustatic lowstand, combined with other factors (ocean water circulation, volcanism) could help to explain the loss of carbonate production during the latest Callovian–Early Oxfordian, previous to the widespread eustatic rise and warning recorded at the onset of the Transversarium Zone (Middle Oxfordian).     

Tectonic and climatic controls on the sequential arrangement of an alluvial fan/fan‐delta complex (Montserrat,Eocene, Ebro Basin,NE Spain)

A magnetostratigraphy‐based chronological framework has been constructed in the Eocene sediments of the Montserrat alluvial fan/fan‐delta complex (southeast Ebro Basin), in order to unravel forcing controls on their sequential arrangement and to revise the tectonosedimentary history of the region. The palaeomagnetic study is based on 403 sites distributed along an 1880‐m‐thick composite section, and provides improved temporal constraints based on an independent correlation to the geomagnetic polarity time scale. The new chronological framework together with sequence stratigraphy and geohistory analysis allow us to investigate the interplay between factors controlling the sequential arrangement of the Montserrat complex at the different temporal scales and to test for orbitally driven climate forcing. The results suggest that the internal stacking pattern in transgressive and regressive sequences sets within the more than 1000‐m‐thick Milany Composite Megasequence can be explained as the result of subsidence‐driven accommodation changes under a general increase of sediment supply. Composite sequences (tens to hundreds of metres thick) likely reflect orbitally forced cyclicity related to the 400‐kyr eccentricity cycle, possibly controlled by climatically induced sea‐level fluctuations. This study also provides new insights on the deformational history of the area, and shows a correlation between (tectonic) subsidence and forelimb rotation measured on basin‐margin deformed strata. Integration of subsidence curves from different sectors of the eastern Ebro Basin allows us to estimate the variable contribution of tectonic loads from the two active basin margins: the Catalan Coastal Ranges and the Pyrenees. The results support the presence of a double flexure from Late Lutetian to Late Bartonian, associated with the two tectonically active margins. From Late Bartonian to Early Priabonian the homogenization of subsidence values is interpreted as the result of the coupling of the two sources of tectonic load.     

Microbial‐dominated carbonate platforms during the Ladinian rifting: sequence stratigraphy and evolution of accommodation in a fault‐controlled setting (Catalan Coastal Ranges,NE Spain)

The Upper Muschelkalk sedimentary record constitutes a major transgressive pulse of north‐eastern Iberia during the Ladinian. This record is arranged in two transgressive–regressive (T–R) sequences formed by two stepped microbial‐dominated carbonate ramp systems where accommodation was mainly controlled by extensional faults. This study seeks to gain new insights into how the evolution of syn‐rift subsidence controls the creation of accommodation space, the depositional styles and, especially, the palaeogeographical domains where specific microbialites developed (thrombolites and stromatolites). Thrombolite bodies (at least 40 m thick) display two types of architecture, biostromal and mud‐mounded and stromatolite bodies (at least 7 m thick) consist of tabular and domed, head‐shaped morphologies. Domed and mounded forms are usually developed during stages of increasing accommodation rates, low‐to flat‐nelief forms tend to grow in association with periods of low accommodation rates. A sea‐level fall of at least 50 m occurred at the end of the Early Ladinian leaving the platform subaerially exposed. As a result, a prominent karst with significant erosional incisions and profuse collapse breccia fillings was formed in the inner and middle ramp settings. The resultant subaerial unconformity bounds T–R sequences 1 and 2. Subsidence curves display two stages of rapid/decelerated total subsidence, constituting two discrete rift/post‐rift pulses in the large Triassic rifting period: (i) Buntsandstein – Middle Muschelkalk, and (ii) Late Muschelkalk – Imon Formation (Rhaetian). The second pulse is characterized by a rapid syn‐rift subsidence during the Late Muschelkalk, and a decelerated post‐rift subsidence throughout the deposition of Keuper facies and Imon Formation. The Late Muschelkalk rapid syn‐rift pulse of total subsidence produces gains in accommodation, which controls the development of the stromatolites and thrombolites (biostromes and mud‐mounds).     

Ordovician tectonic shift in the western North China Craton constrained by stratigraphic and geochronological analyses

The western North China Craton (W-NCC) comprises the Alxa Terrane in the west and the Ordos Block in the east; they are separated by the Helanshan Tectonic Belt (HTB). There is an extensive debate regarding the significant Ordovician tectonic setting of the W-NCC. Most paleogeographic reconstructions emphasized the formation and rapid subsidence of an aulacogen along the HTB during the Middle–Late Ordovician, whereas paleomagnetic and geochronologic results suggested that the Alxa Terrane and the Ordos Block were independent blocks separated by the HTB. In this study, stratigraphic and geochronologic methods were used to constrain the Ordovician tectonic processes of the W-NCC. Stratigraphic correlations show that the Early Ordovician strata comprise ~500-m-thick tidal flat and lagoon carbonate successions with a progressive eastward onlap, featuring a west-deepening shallow-water carbonate shelf. In contrast, the Late Ordovician strata are composed of ~3,000-m-thick abyssal turbidites in the west and ~400-m-thick shallow-water carbonates in the east, defining an eastward-tapering basin architecture. Early Ordovician detrital zircons with ages of ~2,800–1,700 Ma were derived from the Ordos Block; the Late Ordovician turbidites were sourced from the western Alxa Terrane, based on zircon ages clustered at ~1,000–900 Ma. The petrographic modal composition and zircon age distribution imply a provenance shift from a stable craton to a recycled orogen in the Middle Ordovician. These shifts define a tectonic conversion from a passive continental margin to a foreland basin at ~467 Ma, resulting in the eastward progradation of the turbidite wedge around the HTB, the eastward backstepping of the carbonate platform in the east and the eastward expansion of orogenic thrusting in the western Alxa Terrane. This tectono-sedimentary shift coincided with the advancing subduction of the southern Paleo-Asian Ocean beneath the Alxa Terrane, generating the western Alxa continental arc and the paired retro-arc foredeep in the east under a compressional tectonic regime.     

Sequence stratigraphy of a Paleogene coal bearing rim syncline: interplay of salt dynamics and sea‐level changes,Schöningen,Germany

Salt rim synclines contain important hydrocarbon and coal resources in central Europe. The Schöningen salt rim syncline is filled with >300 m of Early to Middle Eocene unconsolidated clastics with interbedded lignitic coal seams that are mined at the surface. In this study, 357 lithologic logs are integrated with measured outcrop sections and paleo‐botanical data to interpret the depositional environments and sequence stratigraphic framework of the rim syncline fill. As salt withdrew, it generated an elongate mini‐basin that mimicked an incised valley. The sustained accommodation and slow broadening of the syncline affected the stratigraphic architecture and contributed to the preservation of coal units. The clastic units in the syncline filled in seven depositional stages: (1) tidally influenced fluvial estuarine channels; (2) mixed tide‐ and wave‐ dominated estuaries; (3) prograding wave dominate deltas; (4) transgressive shoreline deposits; (5) braided fluvial channels; (6) estuaries; and (7) prograding tide‐dominated channels. The succession defines four 3rd order sequences and several higher order sequences that are possibly related to Milankovitch cycles. The higher order sequences are dominantly characterized by stacked transgressive cycles of thick, lowstand coals overlain by estuarine sands. The nearly continuous warm and wet Eocene climate was conducive to continuous peat production with a climatic overprint recorded in the mire type: ombrotrophic mires developed in wetter times and rheotrophic mires developed in relatively drier conditions pointing to the presence of orbitally controlled seasonality. Both mire types were impacted by the interplay of subsidence and base‐level. The continuous dropping of the mires below base‐level via subsidence protected the mires against erosion and may account for the absence of coals outside of the rim synclines in the region.     

Tectonic control of facies architecture, sequence stratigraphy and drowning of a Liassic carbonate platform (Betic Cordillera, Southern Spain)

This paper develops a tectono‐stratigraphic model for the evolution and drowning of Early Jurassic carbonate platforms. The model arises from outcrop analysis and Sr isotope dating of successions exposed in the Betic Cordillera in southeastern Spain. Here, an extensive Early Jurassic (Sinemurian) carbonate platform developed on the rifted Tethyan margin of the Iberian Plate. The platform was dissected by extensional faults in early jamesoni times (ca. 191 Ma) and again in late ibex times (ca.188 Ma) during the Pliensbachian stage. Extensional faults and fault block rotation are shown to control the formation of three sequence boundaries that divide the platform stratigraphy (the Gavilan Formation) into three depositional sequences. The last sequence boundary marks localised drowning of the platform and deposition of the deeper water Zegri Formation, whereas adjacent platforms remain exposed or continue as the site of shallow‐marine sediment accumulation. This study is based on mapping, facies analysis and dating of platform carbonates exposed in three tectonic units within the zone: Gabar, Ponce and Canteras. Facies analysis leads to the recognition of facies associations deposited in carbonate ramp environments and adjacent to synsedimentary, marine, fault scarps. Sr isotope dating enables us to correlate platform‐top carbonates from the different tectonic units at a precision equivalent to ammonite zones. A sequence stratigraphic analysis of sections from the three tectonic units is carried out using the facies models together with the Sr isotope dates. This analysis indicates a clear tectonic control on the development of the stratigraphy: depositional sequences vary in thickness, have wedge‐shaped geometries and vary in facies, internal geometries and systems tracts from one tectonic unit to another. Criteria characterising depositional sequences and sequence boundaries from the Gabar and Ponce units are used to establish a tectono‐stratigraphic model for carbonate platform depositional sequences and sequence boundaries in maritime rifts, which can be applied to other less well‐exposed or subsurface successions from other sedimentary basins. Onlapping transgressive and progradational highstand systems tracts are recognised on dip slope ramps. Falling stage and lowstand systems tracts are developed as thick breccia units in hangingwall areas adjacent to extensional faults. Sequence boundaries vary in character, amplitude and/or duration of sea‐level fall and persistence across the area. Some boundaries coalesce onto the Canteras unit, which remained as a relatively positive area throughout the early Pliensbachian (Carixian). The carbonate platform on the Ponce tectonic unit drowned in the latest Carixian (davoei biozone). However, the adjacent tectonic units remained emergent and developed a long‐lived sequence boundary, indicating tectonic subsidence as the major cause for platform drowning. The stratigraphic evolution of this area on the rifted southern Iberian margin indicates that a widespread restricted shallow‐water carbonate platform environment accumulating peritidal carbonates evolved with faulting to a more open‐marine setting. Sr dating indicates that this transition took place around the Sinemurian–Pliesbachian boundary and it was driven by local fault‐related subsidence together with likely post‐faulting regional subsidence.     

Milankovitch and sub‐Milankovitch forcing of the Oxfordian (Late Jurassic) Terres Noires Formation (SE France) and global implications

High‐resolution analysis (2277 samples) of magnetic susceptibility (MS) was performed on ～700‐m‐thick Early–Middle Oxfordian marine marls of the Terres Noires Formation, SE France. MS variations within these sediments record sub‐Milankovitch to Milankovitch frequencies with long‐term eccentricity (405 kyr and ～2 Myr) being the most prominent. The 405 kyr cycle was used as a high‐resolution geochronometer for astronomical calibration of this poorly constrained interval of Late Jurassic time. The estimated duration of this Early–Middle Oxfordian interval concurs with the current International Geologic Time Scale GTS2004 (～4 Myr), but the estimated durations of the corresponding ammonite zones are notably different. The calibration improves the resolution and accuracy of the M‐sequence magnetic anomaly block model that was previously used to establish the Oxfordian time scale. Additionally, the 405 kyr cyclicity is linked to third‐order sea‐level depositional sequences observed for Early–Middle Oxfordian time. Strong ～2 Myr cycles are consistent with long‐term eccentricity modulation predicted for the Late Jurassic. These cycles do not match second‐order sequences that have been documented for European basins; this raises questions about the definition and hierarchy of depositional sequences in the Mesozoic eustatic chart. Our results require substantial revisions to the chart, which is frequently used as a reference for the correlation of widely separated palaeogeographic domains. Finally, a long‐term trend in the MS data reflects a progressive carbonate enrichment of the marls expressing an Early Oxfordian global cooling followed gradually by a warming in the Middle Oxfordian. This trend also records a major transgressive interval likely peaking at the Transversarium ammonite zone of the Middle Oxfordian.     

Growth fold controls on carbonate distribution in mixed foreland basins: insights from the Amiran foreland basin (NW Zagros,Iran) and stratigraphic numerical modelling

The evolution from Late Cretaceous to early Eocene of the well dated Amiran foreland basin in the NW Iranian Zagros Mountains is studied based on the reconstruction of successive thickness, palaeobathymetry and subsidence maps. These maps show the progressive forelandwards migration of the mixed carbonate‐siliciclastic system associated with a decrease in creation of accommodation. Carbonate facies variations across the basin suggest a structural control on the carbonate distribution in the Amiran foreland basin, which has been used as initial constraint to study the control exerted by syndepositional folding in basin architecture and evolution by means of stratigraphic numerical modelling. Modelled results show that shallow bathymetries on top of growing folds enhance carbonate production and basin compartmentalization. As a consequence, coarse clastics become restricted to the internal parts of the basin and only the fine sediments can by‐pass the bathymetric highs generated by folding. Additionally, the development of extensive carbonate platforms on top of the anticlines favours the basinwards migration of the depositional system, which progrades farther with higher fold uplift rates. In this scenario, build‐ups on top of anticlines record its growth and can be used as a dating method. Extrapolation of presented modelling results into the Amiran foreland basin is in agreement with an early folding stage in the SE Lurestan area, between the Khorramabad and Kabir Kuh anticlines. This folding stage would enhance the development of carbonate platforms on top of the anticlines, the south‐westward migration of the system and eventually, the complete filling of the basin north of the Chenareh anticline at the end of the Cuisian. Incremental thickness maps are consistent with a thin (0.4–2 km) ophiolite complex in the source area of the Amiran basin.     

Multi‐scale constraints of sediment source to sink systems in frontier basins: a forward stratigraphic modelling case study of the Levant region

Recent scientific work has highlighted the presence of an up to 12 km thick Cenozoic siliclastic and carbonate infill in the Levant Basin. Since the Late Eocene, several regional geodynamic events affecting Afro‐Arabia and Eurasia (collision and strike slip deformation) induced marginal uplifts. The initiation of local and long‐lived regional drainage systems in the Oligo‐Miocene period (e.g., Lebanon, Arabia and Nile) provoked a change in the depositional pattern along the Levant region from carbonate‐dominated to mixed clastic‐rich systems. Herein, we explore the importance of multi‐scale constraints (i.e., seismic, well and field data) in the quantification of subsidence history, sediment transport and deposition of a Middle to Upper Miocene “multi‐source” to sink system along the northern Levant frontier region. Through a comprehensive 4D forward stratigraphic modelling workflow, we suggest that the contribution to basin infill is split between proximal and more distal clastic sources as well as in situ carbonate and hemipelagic deposition. The results show that single‐source scenarios could not reasonably satisfy the basin‐scale constraints. The worldwide application of such new multi‐disciplinary workflows in frontier regions highlights the additional data constraints that are needed to de‐risk highly uncertain geological models in the hydrocarbon exploration phase.     

The Miocene tectono-sedimentary evolution of the southern Tyrrhenian Sea: stratigraphy, structural and palaeomagnetic data from the on-shore Amantea basin (Calabrian Arc, Italy)

We report on new stratigraphic, palaeomagnetic and anisotropy of magnetic susceptibility (AMS) results from the Amantea basin, located on‐shore along the Tyrrhenian coast of the Calabrian Arc (Italy). The Miocene Amantea Basin formed on the top of a brittlely extended upper plate, separated from a blueschist lower plate by a low‐angle top‐to‐the‐west extensional detachment fault. The stratigraphic architecture of the basin is mainly controlled by the geometry of the detachment fault and is organized in several depositional sequences, separated by major unconformities. The first sequence (DS1) directly overlaps the basement units, and is constituted by Serravallian coarse‐grained conglomerates and sandstones. The upper boundary of this sequence is a major angular unconformity locally marked by a thick palaeosol (type 1 sequence boundary). The second depositional sequence DS2 (middle Tortonian‐early Messinian) is mainly formed by conglomerates, passing upwards to calcarenites, sandstones, claystones and diatomites. Finally, Messinian limestones and evaporites form the third depositional sequence (DS3). Our new biostratigraphic data on the Neogene deposits of the Amantea basin indicate a hiatus of 3 Ma separating sequences DS1 and DS2. The structural architecture of the basin is characterized by faulted homoclines, generally westward dipping, dissected by eastward dipping normal faults. Strike‐slip faults are also present along the margins of the intrabasinal structural highs. Several episodes of syn‐depositional tectonic activity are marked by well‐exposed progressive unconformities, folds and capped normal faults. Three main stages of extensional tectonics affected the area during Neogene‐Quaternary times: (1) Serravallian low‐angle normal faulting; (2) middle Tortonian high‐angle syn‐sedimentary normal faulting; (3) Messinian‐Quaternary high‐angle normal faulting. Extensional tectonics controlled the exhumation of high‐P/low‐T metamorphic rocks and later the foundering of the Amantea basin, with a constant WNW‐ESE stretching direction (present‐day coordinates), defined by means of structural analyses and by AMS data. Palaeomagnetic analyses performed mainly on the claystone deposits of DS1 show a post‐Serravallian clockwise rotation of the Amantea basin. The data presented in this paper constrain better the overall timing, structure and kinematics of the early stages of extensional tectonics of the southern Tyrrhenian Sea. In particular, extensional basins in the southern Tyrrhenian Sea opened during Serravallian and evolved during late Miocene. These data confirm that, at that time, the Amantea basin represented the conjugate extensional margin of the Sardinian border, and that it later drifted south‐eastward and rotated clockwise as a part of the Calabria‐Peloritani terrane.     

Patterns of basin fill in Triassic turbidites of the Nanpanjiang basin: implications for regional tectonics and impacts on carbonate‐platform evolution

The Nanpanjiang Basin occurs in a key position for resolving controversies of basin tectonics and patterns of plate assembly at the junction between south China and Southeast Asian plates. Paleocurrent measurements indicate that siliciclastic turbidites in the basin were sourced by the Precambrian Jiangnan uplift to the northeast, the Precambrian Yunkai uplift to the southeast and the Triassic Songma suture to the south. Detrital zircon geochronology reveals Archean (2500 Ma), Paleoproterozoic (1800–1900 Ma), Neoproterozoic (900–1000 Ma) and Paleozoic (420–460 Ma) ages consistent with derivation from the Jiangnan and Yunkai uplifts. A large Permian‐Triassic peak of 250 Ma is present in the southern basin and attenuates northward suggesting derivation from an arc developed along the Songma suture. Sandstone QFL compositions average 65/12/23% and plot in the recycled orogen field except for a few samples in the southern basin that fall in the dissected arc field. The compositions are consistent with derivation from Precambrian basement that includes orogenic complexes. In the southern basin, Middle Triassic turbidites contain greater lithics and feldspars and Lower Triassic turbidites have volcaniclastic composition consistent with derivation from a southerly arc. Our preferred interpretation is evolution from remnant basin to a large peripheral foreland with southward subduction and convergence with Indochina along the Songma suture. The previously proposed Dian‐Qiong zone is not a suture as its map location places it within carbonate platforms bounded by identical stratigraphy. The Nan‐Uttaradit zone is too distant to have provided voluminous siliciclastic flux to the basin. The Nanpanjiang Basin provides an example of the evolution of an exceptionally large foreland with far‐field rejuvenation of Precambrian uplifts and carbonate platforms that were significantly influenced by siliciclastic flux. The timing and pattern of turbidite basin fill impacted platform evolution by enabling margin progradation in areas proximal to siliciclastic sources, whereas platforms distant from sources were driven to aggradation and extreme relief with large‐scale gravitational sector collapse.