The dissection and consortium allocation of Apollo 17 lunar rocks from the boulder at station 7

The Apollo 17 astronauts removed four rocks samples to represent each of the lithologies they recognized in the boulder at station 7: sample 77215 from an off-white meter-sized block; sample 77075 from one of the thin dikes that cross the off-white block; 77115 from the blue-gray rock adjacent to the off-white block and apparently continuous with thin dikes that cross the block; sample 77135 of the tan-gray or green-gray vesicular rock adjacent to the blue-gray (77115) rock. A consortium of investigators has been organized, under the leadership of E.C.T. Chao, to study the samples. Each sample shows a number of lithologic types in terms of clasts (or xenoliths) and matrices. A table shows how subsamples have been allocated for consortium study. Maps and photographs show the relations between subsample locations and lithologies for the two more dissected samples, 77115 and 77135.     

Lunar glass compositions: Apollo 16 core sections 60002 and 60004

Approximately 500 glasses between 1 mm and 125 μm in size have been analyzed from fourteen samples from the Apollo 16 core sections 60002 and 60004. The majority of glasses have compositions comparable to those found in previous studies of lunar surface soils; however, two new and distinct glass compositions that are probably derived in part from mare material occur in the core samples. The major glass composition in all samples is that of Highland Basalt glass, but it also appears that high-K Fra Mauro Basalt (KREEP) glass is more common at the Apollo 16 site than was previously thought. The relative abundance of glasses within the core samples is random in distribution: each sample is characterized by a particular assemblage and distribution of the constituent glass compositions.     

39Ar-40Ar ages of samples from the Apollo 17 station 7 boulder and implications for its formation

³⁹Ar-⁴⁰Ar ages and³⁷Ar-³⁸Ar exposure ages of samples representing four different lithologies of the Apollo 17 station 7 boulder were measured. The age of the dark veinlet material77015of3.98 ± 0.04AE is interpreted as representing the time of intrusion of this veinlet into the 77215 clast. The data obtained so far indicate that the vesicular basalt 77135 formed 100–200 m.y. later. However, this has to be confirmed by³⁹Ar-⁴⁰Ar investigations on separated mineral and/or grain-size fractions. A small clast enclosed in the 77135 basalt gives a well-defined high temperature age of3.99 ± 0.02AE. A sample of the noritic clast 77215 gave4.04 ± 0.03AE, the highest age found so far in this boulder. The³⁹Ar-⁴⁰Ar ages obtained are in agreement with the age relationships deduced from the stratigraphic evidence.Taking into account the shielding by the boulder itself, an average³⁷Ar-³⁸Ar exposure age of(27.5 ± 2.5)m.y. is obtained for the samples collected from the boulder.     

In quest of lunar regolith breccias of exotic provenance: a uniquely anorthositic sample from the Fra Mauro (Apollo 14) highlands

Polymict samples can be used to establish mass-balance constraints regarding the bulk composition of the lunar crust, and to gauge the degree of regional heterogeneity in the composition of the lunar crust. The most ideally polymict type of sample is finely-mixed regolith (lunar soil), or its lithified equivalent, regolith breccia. Fortunately, lunar regolith breccias can occasionally be found at great distances from their points of origin — most of the known lunar meteorites are regolith breccias. We are searching for examples of exotic regolith samples among the Apollo regolith breccia collection. Most of the 21 Apollo regolith breccias analyzed for this study strongly resemble the local soils over which they were collected. Nine regolith breccias from Apollo 16 are surprisingly mature compared to previously-analyzed Apollo 16 regolith breccias, and six of the seven from Apollo 16 Station 5 have lower, more local-soil-like,mg ratios than previously analyzed regolith breccias from this station. Several of the Apollo 14 regolith breccias investigated show significantly highermg, and lower Al, than the local soils.The most interesting sample we have investigated is 14076,1, from a lithology that constitutes roughly half of a 2.0-g pebble. The presence of spherules indicates a regolith derivation for 14076,1, yet its highly aluminous (30 wt.% Al₂O₃) composition is clearly exotic to the 1.6-km traverse surface over which the Apollo 14 samples were collected. This sample resembles soils from the Descartes (Apollo 16) highlands far more than it does any other polymict sample from the Fra Mauro (Apollo 14) region. The I/_sFeO maturity index is extremely low, but this may be a result of thermal annealing. A variety of siderophile elements occur in 14076,1 at typical regolith concentrations. The chemistry of the second most aluminous regolith sample from Apollo 14, 14315, can only be roughly approximated as a mixture of local regolith and 14076,1-like material. However, the low a priori statistical probability for long-distance horizontal transport by impact cratering, along with the relatively high contents of incompatible elements in 14076,1 (despite its high Al content), suggest that this regolith breccia probably originated within a few hundred kilometers of the Appollo 14 site. If so, its compositional resemblance to ferroan anorthosite tends to suggest that the regional crust is, or originally was, far richer in ferroan anorthosite than implied by the meager statistics for pristine rocks from this site. Thus, 14076,1 tends to strengthen the hypothesis that ferroan anorthosite originated as the flotation crust of a global magmasphere.     

Lithic fragments,glasses and chondrules from Luna 16 fines

Bulk compositions of igneous and microbreccia lithic fragments, glasses, and chondrules from Luna 16 fines as well as compositions of minerals in basaltic lithic fragments were determined with the electron microprobe. Igneous lithic fragments and glasses are divided into two groups, the anorthositic-noritic-troctolitic (hereafter referred to as ANT) and basaltic groups. Chondrules are always of ANT composition and microbreccia lithic fragments are divided into groups 1 and 2. The conclusions reached may be summarized as follows: (1) Luna 16 fines are more similar in composition to Apollo 11 than to Apollo 12 and 14 materials (e.g. Apollo 11 igneous lithic fragments and glasses fall into similar ANT and basaltic groups; abundant norites in Luna 16 and Apollo 11 are not KREEP as in Apollo 12 and 14; Luna 16 basaltic lithic fragments may represent high-K and low-K suites as is the case for Apollo 11; rare colorless to greenish, FeO-rich and TiO₂-poor glasses were found in both Apollo 11 and Luna 16; Luna 16 spinels are similar to Apollo 11 spinels but unlike those from Apollo 12). (2) No difference was noted in the composition of lithic fragments, glasses and chondrules from Luna 16 core tube layers A and D. (3) Microbreccia lithic fragments of group 1 originated locally by mixing of high proportions of basaltic with small proportions of ANT materials. (4) Glasses are the compositional analogs to the lithic fragments and not to the microbreccias; most glasses were produced directly from igneous rocks. (5) Glasses show partial loss of Na and K due to vaporization in the vitrification process. (6) Luna 16 chondrules have ANT but not basaltic composition. It is suggested that either liquid droplets of ANT composition are more apt to nucleate from the supercooled state; or basaltic droplets have largely been formed in small and ANT droplets in large impact events (in the latter case, probability for homogeneous and inhomogeneous nucleation is larger. (7) No evidence for ferric iron and water-bearing minerals was found. (8) Occurrence of a great variety of igneous rocks in Luna 16 samples (anorthosite, noritic anorthosite, anorthositic norite, olivine norite, troctolite, and basalt) confirm our earlier conclusion that large-scale melting or partial melting to considerable depth and extensive igneous differentiation must have occurred on the moon.     

A komatiite component in Apollo 16 highland breccias: implications for the nickel-cobalt systematics and bulk composition of the moon

The lunar crust at the Apollo 16 landing site contains substantial amounts of a “primitive component” in which the ferromagnesian group of elements is concentrated. The composition of this component can be retrieved via an analysis of mixing relationships displayed by lunar breccias. It is found to be a komatiite which is compositionally similar to terrestrial komatiites both in major and minor elements. The komatiite component of the lunar crust is believed to have formed by extensive degrees of melting of the lunar interior at depths greater than were involved in the formation of the lunar magma ocean which was parental to the crust. After formation of the anorthositic crust, it was invaded by extensive flows and intrusions of komatiite magma from these deeper source regions. The komatiites became intimately mixed with the anorthosite by intensive meteoroid impacts about 4.5 b.y. ago, thereby accounting for the observed mixing relationships displayed by the crust. The compositional similarity between lunar and terrestrial komatiites strongly implies a corresponding similarity between the compositions of their source regions in the lunar interior and the Earth's upper mantle. The composition of the lunar interior can be modelled more specifically by combining the komatiite composition with its liquidus olivine composition (as determined experimentally) in proportions chosen so as to produce a cosmochemically acceptable range of Mg/Si ratios for the bulk Moon. Except for higher FeO and lower Na₂O, the range of compositions thereby obtained for the bulk moon is very similar to the composition of the Earth's upper mantle.The effects of meteoritic contamination on the abundances of cobalt and nickel in lunar highland breccias were subtracted on the assumption that the contaminating projectiles were chondritic. The cobalt and nickel residuals thereby obtained were found to correlate strongly with the (Mg + Fe) content of the breccias, demonstrating that the Co and Ni are associated with the ferromagnesian component of the breccias and are genuinely indigenous to the Moon. The lunar highland Co and Ni residuals also display striking Ni/Co versus Ni correlations which follow a similar trend to those displayed by terrestrial basalts, picrites and komatiites. The lunar trends provide further decisive evidence of the indigenous nature of the Co and Ni residuals and suggest the operation of extensive fractionation controlled by olivine-liquid equilibria in producing the primitive component of the lunar breccias. Indigenous nickel abundances at the Apollo 14, 15 and 17 sites are much lower than at the Apollo 16 site, although rocks from all sites follow the same Ni/Co versus Ni trends. It is suggested that the primitive component at the Apollo 14, 15 and 17 sites was generally of basaltic composition, in contrast to the komatiitic nature of the Apollo 16 primitive component.     

Radial thickness variation in impact crater ejecta: implications for lunar basin deposits

A review of cratering data and available semi-empirical calculations suggests that the variation of ejecta thickness,t, with increasing range from lunar craters may be approximately modelled by the expression: t=0.14R^0.74(r/R^?3.0 wherer is range from the center of the crater andR, the crater radius, all in meters. This equation has been used to estimate the thickness of ejecta deposits at each of the Apollo sites contributed from the large multi-ringed frontside lunar basins. Predicted average thickness of Imbrium ejecta at Apollo 15 is 812 m; at Apollo 14, 130 m; at Apollo 17, 102 m; and at Apollo 16, 50 m. Since the sequence of formation of these basins is known, the stratigraphic column resulting from superimposed ejecta blankets can be calculated. Results suggest that pre-Nubium crustal material at upland Apollo sites lies at depths greater than 280 (Apollo 14) to 1940 m (Apollo 17). Predicted stratigraphic sections for the Apollo sites are tabulated.     

Apollo 16 neutron stratigraphy

The Apollo 16 soils have the largest low energy neutron fluences (up to 10¹⁷ n/cm², E < 0.18eV) yet observed in lunar samples. Variations in the isotopic ratios ¹⁵⁸Gd/¹⁵⁷Gd and ¹⁵⁰Sm/¹⁴⁹Sm (up to 1.9% and 2.0% respectively) indicate that the low energy neutron fluence in the Apollo 16 drill stem increases with depth throughout the section sampled. Such a variation implies that accretion has been the dominant regolith “gardening” process at this location. The data may be fit by a model of continuous accretion of pre-irradiated material at a rate of ～70 g/(cm² · 10⁸yr) or by models involving as few as two slabs of material in which the first slab could have been deposited as long as 10⁹ yr ago.The ratio of the number of neutrons captured per atom by Sm to the number captured per atom by Gd is lower than in previously measured lunar samples, which implies a lower energy neutron spectrum at this site. The variation of this ratio with chemical composition is qualitatively similar to that predicted by Lingenfelter, Canfield and Hampel.Variations are observed in the ratio ¹⁵²Gd/¹⁶⁰Gd which are fluence correlated and probably result from neutron capture by¹⁵¹Eu.     

Petrology of Apollo 11 sample 10071. A differentiated mini-igneous complex

Sample 10071, 33 is a thin section of Apollo 11 ferrobasalt showing an unusual dual texture. The major portion of the sample is very similar to other fine grained Apollo 11 basalts, but the thin section also includes material with a distinct variolitic texture. The two areas are separated by a sharp boundary and the mineralogy and composition of the two textural types are quite distinct. The mineralogy and chemistry of the variolitic portion show it to be the product of rapid cooling of a liquid, intermediate between the typical Apollo 11 ferrobasalt and the associated Si and K-rich mesostasis. This liquid is the result of fractional crystallization of a magma of composition closely corresponding to the major portion of the 10071 system, followed by crystal-liquid separation. The sample provides strong and direct evidence for igneous differentiation on the lunar surface.     

Trapped solar and cosmogenic noble gas abundances in Apollo 15 and 16 deep drill samples

Abundances and isotopic compositions of all the stable noble gases have been measured in 19 different depths of the Apollo 15 deep drill core, 7 different depths of the Apollo 16 deep drill core, and in several surface fines and breccias. All samples analyzed from both drill cores contain large concentrations of solar wind implanted gases, which demonstrates that even the deepest layers of both cores have experienced a lunar surface history. For the Apollo 15 core samples, trapped⁴He concentrations are constant to within a factor of two; elemental ratios show even greater similarities with mean values of⁴He/²²Ne= 683±44,²²Ne/³⁶Ar= 0.439±0.057,³⁶Ar/⁸⁴Kr= 1.60±0.11·10³, and⁸⁴Kr/¹³²Xe= 5.92±0.74. Apollo 16 core samples show distinctly lower⁴He contents,⁴He/²²Ne(567±74), and²²Ne/³⁶Ar(0.229±0.024), but their heavy-element ratios are essentially identical to Apollo 15 core samples. Apollo 16 surface fines also show lower values of⁴He/²²Ne and²²Ne/³⁶Ar. This phenomenon is attributed to greater fractionation during gas loss because of the higher plagioclase contents of Apollo 16 fines. Of these four elemental ratios as measured in both cores, only the²²Ne/³⁶Ar for the Apollo 15 core shows an apparent depth dependance. No unambiguous evidence was seen in these core materials of appreciable variations in the composition of the solar wind. Calculated concentrations of cosmic ray-produced²¹Ne,⁸⁰Kr, and¹²⁶Xe for the Apollo 15 core showed nearly flat (within a factor of two) depth profiles, but with smaller random concentration variations over depths of a few cm. These data are not consistent with a short-term core accretion model from non-irradiated regolith. The Apollo 15 core data are consistent with a combined accretion plus static time of a few hundred million years, and also indicate variable pre-accretion irradiation of core material. The lack of large variations in solar wind gas contents across core layers is also consistent with appreciable pre-accretion irradiation. Depth profiles of cosmogenic gases in the Apollo 16 core show considerably larger concentrations of cosmogenic gases below ～65 cm depth than above. This pattern may be interpreted either as an accretionary process, or by a more recent deposition of regolith to the upper ～70 cm of the core. Cosmogenic gas concentrations of several Apollo 16 fines and breccias are consistent with ages of North Ray Crater and South Ray Crater of ～50·10⁶ and ～2·10⁶ yr, respectively.     

Oxygen isotope constraints on the origin and differentiation of the Moon

We report new high-precision laser fluorination three-isotope oxygen data for lunar materials. Terrestrial silicates with a range of δ¹⁸O values (− 0.5 to 22.9‰) were analyzed to independently determine the slope of the terrestrial fractionation line (TFL; λ = 0.5259 ± 0.0008; 95% confidence level). This new TFL determination allows direct comparison of lunar oxygen isotope systematics with those of Earth. Values of Δ¹⁷O for Apollo 12, 15, and 17 basalts and Luna 24 soil samples average 0.01‰ and are indistinguishable from the TFL. The δ¹⁸O values of high- and low-Ti lunar basalts are distinct. Average whole-rock δ¹⁸O values for low-Ti lunar basalts from the Apollo 12 (5.72 ± 0.06‰) and Apollo 15 landing sites (5.65 ± 0.12‰) are identical within error and are markedly higher than Apollo 17 high-Ti basalts (5.46 ± 0.11‰). Evolved low-Ti LaPaz mare-basalt meteorite δ¹⁸O values (5.67 ± 0.05‰) are in close agreement with more primitive low-Ti Apollo 12 and 15 mare basalts. Modeling of lunar mare-basalt source composition indicates that the high- and low-Ti mare-basalt mantle reservoirs were in oxygen isotope equilibrium and that variations in δ¹⁸O do not result from fractional crystallization. Instead, these differences are consistent with mineralogically heterogeneous mantle sources for mare basalts, and with lunar magma ocean differentiation models that result in a thick feldspathic crust, an olivine–pyroxene-rich mantle, and late-stage ilmenite-rich zones that were convectively mixed into deeper portions of the lunar mantle. Higher average δ¹⁸O (WR) values of low-Ti basalts compared to terrestrial mid ocean ridge basalts (Δ=0.18‰) suggest a possible oxygen isotopic difference between the terrestrial and lunar mantles. However, calculations of the δ¹⁸O of lunar mantle olivine in this study are only 0.05‰ higher than terrestrial mantle olivine. These observations may have important implications for understanding the formation of the Earth–Moon system.     

Targeting the impactors: siderophile element signatures of lunar impact melts from Serenitatis

Highly siderophile element compositions of lunar impact melt breccias provide a unique record of the asteroid population responsible for large cratering events in the inner Solar System. Melt breccias associated with the 3.89 Ga Serenitatis impact basin resolve at least two separate impact events. KREEP-rich melt breccias representing the Apollo 17 poikilitic suite are enriched in highly siderophile elements (3.6-15.8 ppb Ir) with CI-normalized patterns that are elevated in Re, Ru and Pd relative to Ir and Pt. The restricted range of lithophile element compositions combined with the coherent siderophile element signatures indicate formation of these breccias in a single impact event involving an EH chondrite asteroid, probably as melt sheet deposits from the Serenitatis Basin. One exceptional sample, a split from melt breccia 77035, has a distinctive lithophile element composition and a siderophile element signature more like that of ordinary chondrites, indicating a discrete impact event. The recognition of multiple impact events, and the clear signatures of specific types of meteoritic impactors in the Apollo 17 melt breccias, shows that the lunar crust was not comprehensively reworked by prior impacts from 3.9 to 4.5 Ga, an observation more consistent with a late cataclysm than a smoothly declining accretionary flux. Late accretion of enstatite chondrites during a 3.8-4.0 Ga cataclysm may have contributed to siderophile element heterogeneity on the Earth, but would not have made a significant contribution to the volatile budget of the Earth or oxidation of the terrestrial mantle. Siderophile element patterns of Apollo 17 poikilitic breccias become more fractionated with decreasing concentrations, trending away from known meteorite compositions to higher Re/Ir and Pd/Pt ratios. The compositions of these breccias may be explained by a two-stage impact melting process involving: (1) deep penetration of the Serenitatis impactor into meteorite-free lower crust, followed by (2) incorporation of upper crustal lithologies moderately contaminated by prior meteoritic infall into the melt sheet. Trends to higher Re/Ir with decreasing siderophile element concentrations may indicate an endogenous lunar crustal component, or a non-chondritic late accretionary veneer in the pre-Serenitatis upper crust.     

The crystal chemistry of armalcolites from Apollo 17*

X-ray single-crystal studies have been made of armalcolites from the 2–5-mm fraction of Apollo 17 soils 75082 and 78502. Two types of armalcolite, “ortho” and “para” have previously been distinguished on the basis of optical properties and crystal habit in the Apollo 17 samples. “Ortho”-armalcolite has the space group of pseudobrookite, Bbmm, and has cell dimensions: a = 9.743 (5); b = 10.001 (5); and c = 3.728 (2)Å. The crystal structure, refined from 582 symmetry-independent intensities, is ordered with Ti in the site with m symmetry and Mg and Fe in the site with mm symmetry. “Para”-armalcolite has space group Bbmm, cell dimensions: a = 9.712 (20), b = 9.997 (20), and c 3.735 (8)Å; and is structurally identical with “ortho”-armalcolite. The two crystals studied are similar but not identical in composition, but the slight compositional differences and identical structures do not warrant the use of separate mineral names.     

Meteoritic and non-meteoritic trace elements in Luna 16 samples

Two Luna 16 soils have been analyzed for Ag, Au, Bi, Br, Cd, Co, Cs, Cu, Ga, Ge, In, Ur, Ni, Rb, Re, Sb, Se, Te, Tl, and Zn. A meteoritic component similar to that in Apollo 11 and 12 soils seems to be present, corresponding to ∼1.5 to 2% Cl chondrites or equivalent. It probably consists largely of micrometeorites. Three elements show strong enrichments compared to Apollo 11 and 12 soils: Cd (5× to 200×), Ag (5× to 10×), and Bi (3×). Presumably these elements were brought in by Cd-Ag-Bi rich material, similar to that in Unit VI of Apollo core 12028.     

Apollo 15 green glasses

Apollo 15 breccia 15427 and soils 15101, 15261 and 15301 contain abundant spheres and fragments of a green glass that is remarkably constant in composition. The glass is rich in Fe and Mg, and low in Ti, unlike any known lunar basalt, and may be derived from material of pyroxenitic composition in the Apennine Front.     

Diffusion of rare gases of solar wind origin from lunar fines as bubbles

A diffusion mechanism is proposed which takes into account phenomena observed in ion-implanted solids, in particular the precipitation of rare gas in the form of bubbles and their migration. The composition of rare gases in the bubbles is inferred from the calculated distribution of solar wind rare gas ions as a function of depth in the grains. These calculations are made for the location and average composition of Apollo 11 samples. It is shown by analogy with experimental observations in ion-implanted solids that the bubbles would migrate towards the surface and that the diffusion constant for this migration would be strongly depth dependent. Relative abundances of rare gas nuclides remaining behind due to the resultant degassing are estimated for one Apollo 11 soil sample and are compared with observed relative abundances for this sample. A qualitative explanation of some of the experimental observations of Ducati et al. on individual lunar grains is also offered.     

Apollo 17 KREEPy basalt: A rock type intermediate between mare and KREEP basalts

The Apollo 17 KREEPy basalt is a unique lunar volcanic rock, observed only as clasts in the light friable breccia matrix (72275) of Boulder 1, Station 2 at Taurus-Littrow. Its status as a volcanic rock is confirmed by the absence of any meteoritic contamination, a lack of cognate inclusions or xenocrystal material, and low Ni contents in metal grains.The basalt was extruded 4.01 ± 0.04 b.y. ago, approximately contemporaneously with the high-alumina mare basalts at Fra Mauro; shortly afterwards it was disrupted, probably by the Serenitatis impact, and its fragments emplaced in the South Massif. The basalt, which is quartz-normative and aluminous, is chemically and mineralogically intermediate between the Apollo 15 KREEP basalts and the high-alumina mare basalts in most respects. It consists mainly of plagioclase and pigeonitic pyroxene in approximately equal amounts, and 10–30% of mesostatis. Minor phases outside of the mesostatis are chromite, a silica mineral, Fe-metal, and rare olivine; the mesostatis consists primarily of ilmenite, Fe-metal, troilite, and ferroaugite, set in a glassy or microcrystalline Si-rich base.Chemical and isotopic data indicate that an origin by partial melting of a distinct source region is more probable than hybridization or contamination of magmas, and is responsible for the transitional composition of the basalt. The moon did not produce two completely distinct volcanic groups, the KREEP basalts and the mare/mare-like basalts; some intermediate rock types were generated as well. A corresponding spectrum of source regions must exist in the interior of the moon.     

Inert gases from Apollo 11 and Apollo 12 fines: Reversals in the trends of relative element abundances

On the basis of the⁴He/²⁰Ne ratios in feldspathic particles from Apollo 11, basaltic fragments from Apollo 11, and magnetic separates from Apollo 12 fines, one expects the former to have the highest, and the Apollo 12 material to have the lowest⁸⁴Kr/¹³²Xe ratios. This is not the case; the⁸⁴Kr/¹³²Xe ratios from sample 12070 are substantially greater than those from the feldspathic and basaltic fragments in 10084. The trend-reversal in the feldspathic particles could be due to the trapping of genuine primordial lunar Kr and Xe. The reversal in the Apollo 11 basaltic fragments might be due to periodicnear-quantitative loss of the lighter gases by impact heating, with the Apollo 11 fines containing a relatively large proportion of strongly heated fragments.     

Crater frequency age determinations for the proposed Apollo 17 site at Taurus-Littrow

Crater frequency distributions determined for surfaces in the Taurus-Littrow region of the Moon and compared with crater counts and radiometric age dates for Apollo 11, 12 and 14 landing sites indicate that the surface of the proposed Apollo 17 landing site was formed between 2.5 and 2.8 by ago.