Kinematic History and Changes in the Tectonic StressRegime during the Cenozoic along the Qinling andSouthern Tanlu Fault Zones

Since the mid-late Eocene, North China has been subjected to extensional stress, resulting in the formation and development of basins. The dynamic origin of this crustal extension has long been an issue of debate. This paper presents the results of kinematic analyses of faults obtained from two seperated areas in North China. In the Weihe graben situated on the southernmost margin of the Ordos block, analyses of fault kinematics were coupled with an analysis of the basin's subsidence history. Three successive extensional tectonic phases accompaning the basin's formation and development have been distinguished. The Palaeogene extension was oriented in a WNW-ESE direction; the Neogene extension in a NE-SW direction and the Pliocene-Quaternary extension in a NW-SE direction. Such changes have also been recorded by fault kinematics along the southern Tanlu fault zone. This has been demonstrated by three successive sets of fault striations indicating normal dip slip resulting from NW-SE extension, then left-     

The Dihedral Angle and Intersection Processes of a Conjugate Strike‐Slip Fault System in the Tarim Basin,NW China

Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, "X" type NE and NW trending faults occur within CambrianOrdovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19° to 62° in the Cambrian and 26° to 51° in the Ordovician, and their modes are 42° and 44° respectively. These data are significantly different from the ～60° predicted by the Coulomb fracture criterion. It is concluded that:(1) The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial;(2) As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting;(3) Sequential slip may have played an important role in forming conjugate fault intersections;(4) The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active "X" type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.     

Structural and Chronological Evidence for the India-Eurasia Collision of the Early Paleocene in the Eastern Himalayan Syntaxis, Namjagbarwa

The eastern Himalayan syntaxis in Namjagbarwa is a high-grade metamorphic terrain formed by the India-Eurasia collision and northward indentation of the Indian continent into Asia. Right- and left-lateral slip zones were formed by the indentation on the eastern and western boundaries of the syntaxis respectively. The Dongjug-Mainling fault zone is the main shear zone on the western boundary. This fault zone is a left-lateral slip belt with a large component of thrusting. The kinematics of the fault is consistent with the shortening within the syntaxis, and the slipping history along it represents the indenting process of the syntaxis. The Ar-Ar chronological study shows that the age of the early deformation in the Dongjug-Mainling fault zone ranges from 62 to 59 Ma. This evidences that the India-Eurasia collision occurred in the early Paleocene in the eastern Himalayan syntaxis.     

Spatial Characteristics and Controlling Factors of the Strike‐slip Fault Zones in the Northern Slope of Tazhong Uplift,Tarim Basin: Insight from 3D Seismic Data

The detailed characteristics of the Paleozoic strike-slip fault zones developed in the northern slope of Tazhong uplift are closely related to hydrocarbon explorations. In this study, five major strike-slip fault zones that cut through the Cambrian-Middle Devonian units are identified, by using 3D seismic data. Each of the strike-slip fault zones is characterized by two styles of deformation, namely deeper strike-slip faults and shallower en-echelon faults. By counting the reverse separation of the horizon along the deeper faults, activity intensity on the deeper strike-slip faults in the south is stronger than that on the northern ones. The angle between the strike of the shallower en-echelon normal faults and the principal displacement zone(PDZ) below them is likely to have a tendency to decrease slightly from the south to the north, which may indicate that activity intensity on the shallower southern en-echelon faults is stronger than that on the northern ones. Comparing the reverse separation along the deeper faults and the fault throw of the shallower faults, activity intensity of the Fault zone S1 is similar across different layers, while the activity intensity of the southern faults is larger than that of the northern ones. It is obvious that both the activity intensity of the same layer in different fault zones and different layers in the same fault zone have a macro characteristic in that the southern faults show stronger activity intensity than the northern ones. The Late Ordovician décollement layer developed in the Tazhong area and the peripheral tectonic events of the Tarim Basin have been considered two main factors in the differential deformation characteristics of the strike-slip fault zones in the northern slope of Tazhong uplift. They controlled the differences in the multi-level and multi-stage deformations of the strike-slip faults, respectively. In particular, peripheral tectonic events of the Tarim Basin were the dynamic source of the formatting and evolution of the strike-slip fault zones, and good candidates to accommodate the differential activity intensity of these faults.     

Deformation at the Easternmost Altyn Tagh Fault: Constraints on the Growth of the Northern Qinghai–Tibetan Plateau

How the Altyn Tagh fault(ATF) extends eastwards is one of the key questions in the study of the growth of the Qinghai–Tibetan Plateau. Detailed fieldwork at the easternmost part of the ATF shows that the ATF extends eastward and bypasses the Kuantan Mountain; it does not stop at the Kuantan Mountain, but connects with the northern Heishan fault in the east. The ATF does not enter the Alxa Block but extends eastward along the southern Alxa Block to the Jintanan Mountain. The Heishan fault is not a thrust fault but a sinistral strike-slip fault with a component of thrusting and is a part of the ATF. Further to the east, the Heishan fault may connect with the Jintananshan fault. A typical strike-slip duplex develops in the easternmost part of the ATF. The cut and deformed Quaternary sediments and displaced present gullies along the easternmost ATF indicate that it is an active fault. The local highest Mountain(i.e., the Kuantan Mountain) in the region forms in a restraining bend of the ATF due to the thrusting and uplifting. The northward growth of the Qinghai–Tibetan Plateau and the active deformation in South Mongolia are realized by sinistral strike-slipping on a series of NE–SW-trending faults and thrusting in restraining bends along the strike-slip faults with the northeastward motion of blocks between these faults.     

Finite-element 3D modeling of stress patterns around a dipping fault

Stresses in a block around a dipping fracture simulating a damage zone of a fault are reconstructed by finite-element modeling. A fracture corresponding to a fault of different lengths, with its plane dipping at different angles, is assumed to follow a lithological interface and to experience either compression or shear. The stress associated with the destruction shows an asymmetrical pattern with different distances from the highest stress sites to the fault plane in the hanging and foot walls. As the dip angle decreases,the high-stress zone becomes wider in the hanging wall but its width changes negligibly in the foot wall.The length of the simulated fault and the deformation type affect only the magnitude of maximum stress,which remains asymmetrical relative to the fault plane. The Lh/Lfratio, where Lhand Lfare the widths of high-stress zones in the hanging and foot walls of the fault, respectively, is inversely proportional to the fault plane dip. The arithmetic mean of this ratio over different fault lengths in fractures subject to compression changes from 0.29 at a dip of 80°to 1.67 at 30°. In the case of shift displacement, ratios are increasing to 1.2 and 2.94, respectively.Usually they consider vertical fault planes and symmetry in a damage zone of faults. Following that assumption may cause errors in reconstructions of stress and fault patterns in areas of complex structural setting. According geological data, we know the structures are different and asymmetric in hanging and foot walls of fault. Thus, it is important to quantify zones of that asymmetry. The modeling results have to be taken into account in studies of natural faults, especially for practical applications in seismic risk mapping, engineering geology, hydrogeology, and tectonics.     

Source‐sink System and Sedimentary Model of Progradational Fan Delta Controlled by Restricted Ancient Gully: An Example in the Enping Formation in the Southern Baiyun Sag,Pearl River Mouth Basin,Northern South China Sea

Tectonic activity occurred during the depositional period of the Enping Formation in the southern Baiyun Sag in the Pearl River Mouth Basin,with a series of synsedimentary faults and a set of large fan delta reservoir bodies developing.There is no data from drilling,cores,etc.for this area,so this paper applies three-dimensional seismic data to study the structural style of the steep slope zone,the seismic facies characteristics of fan deltas,and the source-sink system and sedimentary model of the Enping Formation.The control action of tectonic activity on fan deltaic sedimentary systems is studied by combining interpretation of fault systems,dissection of structural styles,seismic reflection structure,seismic facies geometry,and seismic attribute analysis,together with theoretical analysis of the source-sink deposition process.The Baiyun Sag has experienced tectonic activity since the Eocene,and a series of synsedimentary faults are developed in the southern steep slope zone.Under the common control of multiple large synsedimentary faults,a large ancient gully formed in the steep slope zone in the south,which gradually widened from south to north.The uplift area in the southern part of the sag was exposed for a long time during the deposition of the Enping Formation and consequently suffered weathering and erosion.The resulting sediments were transported through a system of provenance channels composed of slopes and an ancient gully to the depression area,where they were deposited and eventually converged to form a large fan delta.The fan delta presents the overall characteristics of NS strong wedge reflection and EW strong domal reflection—thick in the middle part and thin in the wings.It displays a lobe-shaped distribution on the plane,with the fan root pointing to the south slope.According to differences in reflection intensity from bottom to top,it can be subdivided into three stages of progradational sedimentary bodies—the southern uplift and denudation zone,the large ancient gully,and the fan delta—which together constitute a complete source-sink system.This represents a sedimentary model of progradational fan delta under the overall joint control of the re stricted ancient gully and syndepositional faults.     

Active Faulting Pattern,Present‐day Tectonic Stress Field and Block Kinematics in the East Tibetan Plateau

Abstract: This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10–14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low (2–4 mm/a) and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7–9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and rheologically layered. The upper crust seems to be decoupled from the lower crust through a décollement zone at a depth of 15–20 km, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this décollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.     

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.     

Deep Structural Framework and Genetic Analysis of Gold Concentration Areas in the Northwestern Jiaodong Peninsula, China: A New Understanding based on High-Resolution Reflective Seismic Survey

The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies’ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and west-dipping, N–S to N20°–30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacılar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of left-lateral oblique slip of approximately 4.1 mm·year^–1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period.     

A reappraisal of the 1950 (Mw 6.9) Mondy earthquake, Siberia, and its relationship to the strain pattern at the south-western end of the Baikal rift zone

ABSTRACT The precise nature of the transition between the present-day compressional tectonics in central Mongolia and extensional deformation in the central Baikal rift has still to be determined. For that purpose we have built a comprehensive earthquake focal mechanism data base for the Mongolia – southern Siberia area, from which we map the variations of the stress field. We focus our detailed investigations on the largest seismic event in the transition zone, the 1950 (Mw 6.9) Mondy earthquake, for which several discordant focal mechanisms have been proposed. Using a new approach in source inversion, we resolve the focal mechanism (left-lateral strike slip type on a steep south-dipping fault) and depth (14 ± 3 km) of the Mondy earthquake with a satisfactory accuracy. This seismological information, combined with the geological observations, allows us to decipher the connections between the 1950 mainshock, the local stress tensor and the active faults, which strongly suggest a partitioning of the deformation between two faults, namely the Mondy and Ikhe–Ukghun faults.     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

Abstract

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and westdipping, N-S to N20°-30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacilar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of leftlateral oblique slip of approximately 4.1 mm?year^?1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Shear structural paragenesis and its role in continental rifting of the East Asian margin

The spatial-genetic relationships between transit fault systems of the East Asian global shear zone (EAGSZ) are analyzed. It is established that the EAGSZ internal structure between the Okhotsk and South China seas is identical to that of world-known natural and experimental shear zones, which confirms its development as an integral structure. The structural-kinematic analysis included the Tan-Lu-Sikhote-Alin (TS) system of left-lateral strike-slip faults (NNE 25°–30°) and the Bohai-Amur (BA) system of updip-strike-slip faults (NE 50°–70°). It is shown that these systems were formed as structural parageneses during two stages. The first and shear-thrust stage (Jurassic-Early Cretaceous) was marked by general NNW-oriented compression with the formation of the TS system of left-lateral strike-slip faults and their structural parageneses (compression structures) such as the BA system of updip-thrusts. The second, strike-slip-pull apart stage (Late Cretaceous-Cenozoic) was characterized by SE-directed tangential compression, which was generated by the SW left-lateral displacement of the continental crust along the Central Sikhote-Alin deep-seated fault. In such dynamic settings, the updip-thrust kinematics of the BA system gave way to that of left-lateral strike-slip faults. The strike-slip faults were formed in the transtension regime (shear with extension), which determined the development of pull-apart structures, where the left-lateral shear extension component played the decisive role. Simultaneously, the extension involved the Tan-Lu strike-slip fault with the formation of the rift valley and the discrete development of sedimentary basins along the latter.     

Activity rating of Pliocene–Quaternary faults: a formalized approach (example of the Baikal rift system)

It is suggested to estimate the Pliocene–Quaternary fault activity in a formalized way from synthesis of different data. The respective database consists of two main sections: (i) general information and basic fault parameters and (ii) geomorphic, structural, paleoseismic, seismological, geophysical, geodetic, engineering-geological, hydrological, and meteorological data. The fault characteristics are scored according to their significance, and the cumulative score measures the fault activity. With this approach, the faults in the Barguzin and Tunka rift basins and in the northeastern flank of the Baikal rift system have been divided into five activity classes (low, medium, relatively high, high, and very high activity) and mapped correspondingly. It has been recommended that the concept of an hazardous fault, as updated with regard to the activity rating, refers to faults of relatively high, high, and very high activity. Thus identified hazardous faults within the study area are quite few (4–8%), though this percent may increase slightly as more input data become available. The underestimation cannot be dramatic because all known seismological and structural characteristics of faults essential for the activity rating have been already taken into account. The new approach may be useful in seismic risk assessment and in choice of sites for instrumental monitoring of seismicity.     

青藏高原中部第四纪左旋剪切变形的地表地质证据

在青藏铁路的格尔木—拉萨段进行的活动断裂调查发现,在沱沱河—五道梁之间宽约150km的地段内发育了多条由北西西向次级断层左列分布构成的北西西向和北西向左旋张扭性断裂带,在断裂带之间则发育"S"型的北东向裂陷盆地和雁列分布的菱形裂陷盆地,盆地边界断裂也为左旋张扭性质。上述断裂带和裂陷带主要形成于第四纪,它们构成了宽约150km的不均匀的左旋简单剪切变形域,该变形域的整体活动性较弱,属于弱的不均匀剪切变形域。但其中的二道沟断陷盆地是个例外,该盆地边界断裂的垂直活动速率约为0 5mm/a,左旋活动速率介于0 8～1 0mm/a之间。而在整个左旋剪切变形带累计的左旋走滑速率不会超过6mm/a,它们所调节的昆仑山与唐古拉山之间的地壳南北缩短量也可能仅占总缩短量的15%～30%。上述弱剪切变形域与强烈左旋走滑的昆仑断裂系共同构成了高原中部的左旋剪切变形带,它们在印度板块与欧亚板块强烈碰撞的构造动力学背景下,起着调节青藏高原南北向缩短的重要作用。     

Morphotectonics of the Baikal rift valley,Eastern Siberia,USSR

The Baikal rift valley, the central segment of the Baikal rift zone located in southern East Siberia, consists of two large depressions separated by an interdepressional uplift. The thickness of the Neogene-Quaternary sediments filling in the depression amounts to 5 km (Logatchev and Florensov 1978). The interdepressional uplift consists of subsiding residual steps and active tilted horsts.The NW slope of the Baikal rift is controlled by a system of faults diverging to the N. This system comprises tectonic scarps (faceted ridge spurs), an inclined piedmont surface and a summit slope. The facets indicate the position of the main dip slip faults behind which longitudinal strike slip faults are distributed. Between the branching faults, the so-called intermediate steps are situated. Their subsidence and destruction result in expansion of the rift valley. Transformation of normal faults into listric faults is manifested in the tectonic topography in the areas of the residual and intermediate steps. The large dimensions of the Baikal rift valley are evidently due to its being confined to the faults striking NE-SW.     

Evolution of the southern Taiwan–Sinzi Folded Zone and opening of the southern Okinawa trough

Recent interpretation of seismic sections and free-air gravity anomalies in offshore northern Taiwan reveals that the southern Taiwan–Sinzi Folded Zone began to form in late Middle Miocene, though it was mainly constructed in the Late Pliocene with strong reverse faulting and folding. Two westward progradational sequences were deposited in the shelf basin with sediments supplied from the southern Taiwan–Sinzi Folded Zone and the southern Ryukyu Arc. These two structures are displaced by several northwest-striking dextral strike–slip faults that were active in the early Quaternary when the clockwise-rotated southern Ryukyu Arc and the folded southern Taiwan–Sinzi Folded Zone were broken. It is believed that recent extension in the southern Okinawa Trough started in the early Quaternary because uplift on the southern Taiwan–Sinzi Folded Zone continued to latest Pliocene–early Quaternary. Paleogene–Miocene sediments of the East China Sea Shelf in the western part of the southern Okinawa Trough Basin are interpreted to indicate that the East China Sea Shelf Basin extended to the east of the southern Taiwan–Sinzi Folded Zone.     

Deformation style in the damage zone of the Mondy fault: GPR evidence (Tunka basin,southern East Siberia)

The Mondy strike-slip fault connects the W-E Tunka and N-S Hovsgol basins on the southern flank of the Baikal rift system. Ground penetrating radar (GPR) surveys in its damage zone provide constraints on thicknesses, dips, and plunges of fault planes, as well as on the amount and sense of vertical slip. Strike-slip faulting in the southern segment of the Mondy fault within the territory of Russia bears a normal slip component of motion along the W-E and NW planes. These motions have produced negative flower structures in shallow crust appearing as grabens upon Pleistocene fluvioglacial terraces. The amount of normal slip estimated from the displacement of reflection events varies over the area and reaches its maximum of 3.4 m near Mondy Village. In the Kharadaban basin link, left-lateral strike slip displaces valleys of ephemeral streams to 22 m, while normal slip detected by GPR reaches 2.2 m; this normal-to-strike slip ratio corresponds to a direction of ~ 6° to the horizon. The angles of dips of faults are in the range 75°-79°; the thicknesses of fault planes marked by low- or high-frequency anomalies in GPR records vary from 2.5 to 17.0 m along strike and decrease with depth within a few meters below the surface, which is common to near-surface coseismic motions. Many ruptures fail to reach the surface but appear rather as sinkholes localized mainly in fault hanging walls. The deformation style in the damage zone of the Mondy fault bears impact of the NW Yaminshin fault lying between its two segments. According to photoelasticity, the stress field changes locally at the intersection of the two faults, under NE compression at 38°, till the inverse orientations of principal compression and extension stresses. This stress pattern leads to a combination of normal and left-lateral strike slip components.     

Late Cenozoic transtensional fault belt discovered on the boundary of the Awati Sag in the northwestern Tarim Basin

Late Cenozoic transtensional fault belt was discovered on Shajingzi fault belt, NW boundary of the Awati Sag in the northwestern Tarim Basin. And numerous Quaternary normal faults were discovered on Aqia and Tumuxiuke fault belts, SW boundary of Awati. This discovery reveals Quaternary normal fault activity in the Tarim Basin for the first time. It is also a new discovery in the southern flank of Tianshan Mountains. Shajingzi transtensional fault belt is made up of numerous, small normal faults. Horizontally, the normal faults are arranged in right-step, en echelon patterns along the preexisting Shajingzi basement fault, forming a sinistral transtensional normal fault belt. In profile, they cut through the Paleozoic to the mid-Quaternary and combine to form negative flower structures. The Late Cenozoic normal faults on the SW boundary of Awati Sag were distributed mainly in the uplift side of the preexisting Aqia and Tumuxiuke basement-involved faults, and combined to form small horst and graben structures in profile. Based on the intensive seismic interpretation, careful fault mapping, and growth index analysis, we conclude that the normal fault activity of Shajingzi transtensional fault belt began from Late Pliocene and ceased in Late Pleistocene (mid-Quaternary). And the normal faulting on the SW boundary of Awati Sag began from the very beginning of Quaternary and ceased in Pleistocene. The normal faulting on Awati’s SW boundary began a little later than those on the NW boundary. The origin of Shajingzi transtensional normal fault belt was due to the left-lateral strike-slip occurred in the southern flank of Tianshan, and then, due to the eastward escape of the Awati block, a tensional stress developed the normal faults on its SW boundary.