Petrography of the Herrin (No. 11) coal in western Kentucky

The Herrin (No. 11) coal in western Kentucky is in the upper part of the Pennsylvanian (Des Moinesian) Carbondale Formation. Samples were obtained from 13 mines in Kentucky and one mine in Illinois in three equal benches from two to three channels for a total of 93 samples. The rank of the coal (as vitrinite reflectance) is high volatile C bituminous in the Moorman Syncline and high volatile A bituminous in the Webster Syncline. Reflectance does not vary between mines in in the Moorman Syncline. The percentage of total vitrinite macerals for each mine is over 85% and the percentage of togal vitrinite plus liptinite maceralsis over 89% (average over 90%) (both on dry, mineral-free basis). The variation of the two maceral percentages is only significant at the betweenbench level, the middle bench generally having the lowest vitrinite and vitrinite plus liptinite percentages.     

Determination of rank and petrographic composition of Jurassic coals from eastern Surat Basin,Australia

Petrographic analysis and rank determination were carried out on coals from a Jurassic sequence in eastern Surat Basin, Australia. The coals consist mainly of exinite-rich clarite, with desmocollinite as dominant maceral of the vitrinite group. Petrographically there is no significant variation in the composition of the coals. A herbaceous swamp type, free from severe oxidation/ dehydration, appears to have been a dominant depositional environment during the peat accumulation.The coal rank ranges from sub-bituminous B to high-volatile bituminous C/B. Vitrinite reflectance/ depth profile shows a uniform increase in coalification with depth of burial.     

Chemical composition of macerals in bituminous coals of the Gunnedah Basin, Australia, using electron microprobe analysis techniques

The chemical composition of the organic matter in the principal macerals of high-volatile bituminous coals from the Gunnedah Basin, New South Wales (Rv_max of telocollinite between 0.6 and 1.1%) has been evaluated from polished section specimens using an electron microprobe technique. Highest proportions of carbon occur in the inertinite macerals, especially fusinite and secretinite (formerly resino-sclerotinite), as well as in sporinite; lowest proportions of carbon occur in the different macerals of the vitrinite group. Oxygen shows the reverse trend, being most abundant in vitrinite and least abundant in the inertinite components, whereas sulphur is lowest in the inertinites and highest in the liptinite (mainly sporinite) present. Evaluations of maceral composition, using the carbon content of telocollinite as a rank indicator, show that carbon is more abundant in both sporinite and semifusinite, relative to vitrinite, in low-rank high-volatile bituminous coals. The difference decreases with increasing rank, and the proportion of carbon in telocollinite becomes essentially the same as that in sporinite and semifusinite at carbon contents of about 89 and 91%, respectively. The carbon content of fusinite and secretinite, on the other hand, does not seem to vary appreciably with rank advance. No significant difference in composition occurs in the rank range studied between the three vitrinite varieties present, desmocollinite, telocollinite and a more highly reflecting telocollinite resembling pseudovitrinite. No evidence was found to indicate a higher hydrogen content, relative to telocollinite, for the vitrinite matrix of desmocollinite.     

Mongolian coal-bearing basins: Geological settings, coal characteristics, distribution, and resources

This paper presents geological settings, stratigraphy, coal quality, petrography, reserves and the tectonic history of the Mongolian coal-bearing basins. This is based on a synthesis of the data from nearly 50 coal deposits. The results of ultimate and proximate analyses, and calorific value, maceral composition and vitrinite reflectance data is given.The coal deposits of Mongolia tend to become younger from west to east and can be subdivided into two provinces, twelve basins, and three areas. Main controlling factor of coal rank is the age of the coal bearing sequences. Western Mongolian coal-bearing province contains mostly high rank bituminous coal in strata from Late Carboniferous. The basins in southern Mongolia and the western part of central Mongolia have low rank bituminous coal in strata from the Permian. The northern and central Mongolian basins contain mainly Jurassic subbituminous coal, whereas the Eastern Mongolian province has Lower Cretaceous lignite. The Carboniferous, Permian and Jurassic coal-bearing sequences were mainly deposited in foreland basins by compressional tectonic event, whereas Cretaceous coal measures were deposited in rift valleys caused by extensional tectonic event. Petrographically, Mongolian coals are classified as humic type. Vitrinite/huminite groups of Carboniferous, Permian, and Cretaceous coal range from 44.9% to 82.9%. Inertinite group varies between 15.0% and 53.3%, but liptinite group does not exceed more than 7%. Jurassic coals are characterized by high percentages of vitrinite (87.3% to 96.6%) and liptinite groups (up to 11.7%). This might be explained by paleoclimatic conditions. Mongolian coal reserves have been estimated to be 10.2 billion tons, of which a predominant portion is lignite in the Eastern Mongolian province and coking coal in the South Gobi basin.     

Petrographic characteristics of coal from Mailaram coalfield,Godavari valley,Andhra Pradesh

The quantitative maceral study of the Queen seam from Mailaram coalfield of Godavari valley has displayed alternate coal bands rich in vitrinite/liptinite or inertinite. The random vitrinite reflectance (R_o max. %) of these coals, from top part ranges from 0.50 to 0.64%. However, the bottom part of the seam has indicated lower reflectance, between 0.49 and 0.52%. Thus, the Queen seam, in general, has attained high volatile bituminous C rank. The study indicates that the depositional site has been a slowly sinking basin that witnessed alternate dry (oxidizing) and wet (reducing) spells. This subsequently caused fluctuation in water table of the basin and the formation of oxic and anaoxic moor condition, where accumulated vegetal resource transformed into mixed and fusic coal types in due course of time. Being high in liptinite and vitrinite contents and low mineral matter, the Queen seam of Mailaram coalfield has high economic potential.     

Palynology, petrography and geochemistry of the Sewickley coal bed (Monongahela Group, Late Pennsylvanian), Northern Appalachian Basin, USA

Forty-two bench samples of the Sewickley coal bed were collected from seven localities in the northern Appalachian Basin and analyzed palynologically, petrographically, and geochemically. The Sewickley coal bed occurs in the middle of the Pittsburgh Formation (Monongahela Group) and is of Late Pennsylvanian age. Palynologically, it is dominated by spores of tree ferns. Tree fern spore taxa in the Sewickley include Punctatisporites minutus, Punctatosporites minutus, Laevigatosporites minimus, Spinosporites exiguus, Apiculatasporites saetiger, and Thymospora spp. In fact, Punctatisporites minutus was so abundant that it had to be removed from the standard counts and recorded separately (average 73.2%). Even when Punctatisporites minutus is removed from the counts, tree fern spores still dominate a majority of the assemblages, averaging 64.4%. Among the tree fern spores identified in the Sewickley coal, Thymospora exhibits temporal and spatial abundance variation. Thymospora usually increases in abundance from the base to the top of the bed. Thymospora is also more abundant in columns that are thick (>100 cm) and low in ash yield (<12.0%, dry basis). Calamite spores (e.g. Calamospora spp., Laevigatosporites minor, and L. vulgaris) are the next most abundant plant group represented in the Sewickley coal, averaging 20%. Contributions from all other plant groups are minor in comparison.Petrographically, the Sewickley coal contains high percentages of vitrinite (average 82.3%, mineral matter-free (mmf)), with structured forms being more common than unstructured forms. In contrast, liptinite and inertinite macerals both occur in low percentages (average 7.7% and 10.0%, respectively). Geochemically, the Sewickley coal has a moderate ash yield (average 12.4%) and high total sulfur content (average 3.4%).Four localities contained a high ash or carbonaceous shale bench. These benches, which may be coeval, are strongly dominated by tree fern spores. Unlike the lower ash benches, they contain low percentages of vitrinite, which mainly occurs as unstructured vitrinite, and higher liptinite and inertinite contents.The accumulated data suggest that the Sewickley paleomire was probably a rheotrophic, planar mire that had a consistent water cover. This is supported by the high vitrinite contents, moderate ash yields, and high total sulfur contents. The high ash and carbonaceous shale benches probably represent either periods of dryness and substrate exposure, or flooding of the mire surface, the duration of which is unknown.     

Interactions between organic matter and minerals in two bituminous coals of different rank

The association between specific mineral and organic constituents in two Asturian bituminous coals of different rank was studied. For this, raw coals were fractionated by density and the variation of a number of parameters was followed in parallel. Results of coal chemical analyses, including analyses for 22 elements, were used to establish the elemental association with coal organic matter. Petrographic analyses determined the distribution of macerals among densimetric fractions, vitrinite reflectance being at a minimum in the intermediate density fractions. Mineral species were identified by X-ray diffraction, FT-IR spectroscopy and Mössbauer spectroscopy. Comparison of trends for different parameters determined using this set of techniques allowed classification of the various minerals according to their association with organic matter. Carbonates seem to be specifically associated with the organic matter of the low-volatile bituminous coal whereas sulfides concentrate in the organic matter of the high-volatile bituminous coal. Vitrinite is the maceral exhibiting the most probable association with inorganic matter. The possibility of a merely physical association of fine-grained detrital minerals with organic matter cannot be excluded; nevertheless, one must bear in mind that even this type of interaction is important due to its effect on various coal preparation and utilization processes.     

Petrological evolution of the Paleogene coal deposits of Jammu, Jammu and Kashmir, India

A detailed macro- and micro-petrological investigation of 8 coal seam profiles of Eocene age from the sub-Himalayan zone of Jammu was undertaken in order to characterize them petrographically and to focus on their evolution. The quantitative data suggest that these coals are vitrinite rich, with low concentrations of inertinite and rare occurrences of liptinite. According to microlithotype concentration these coals may be characterized as vitrinite rich, with minor amounts of clarite, vitrinertite and trimacerite. The dominant minerals are clays, siderite and pyrite (occurring mostly as disseminations, cavity filling and in framboidal state). These coals are vitric in type, low volatile bituminous in rank and ashy in grade.The petrographic character and the presence of teleutospores suggest that, similar to other Tertiary coal deposits in the world, the angiosperm flora contributed chiefly to the development of coal facies in the area. The maceral and microlithotype composition shows that these coals originated from the low forest and undisturbed (in situ) peat in foreland basins under limno-telmatic depositional conditions. The water was brackish with regular influxes of fresh water.     

Brecciated and mineralized coals in Union County, Western Kentucky coal field

Coals from the D-2 and D-3 boreholes in the Grove Center 7 1/2 min quadrangle, Union County, KY, have been found to be highly brecciated and mineralized. The mineralization is dominated by a carbonate assemblage with minor sulfides and sulfates. Included among the secondary minerals is the lead selenide, clausthalite. Overall, the emplacement of secondary vein minerals was responsible for raising the rank of the coals from the 0.6–0.7% R_max range found in the area to as high as 0.95–0.99% R_max.A 1.3-m-thick coal found in one of the boreholes is unique among known Western Kentucky coals in having less than 50% vitrinite. Semifusinite and fusinite dominate the maceral assemblages. The coal is also low in sulfur coal, which is unusual for the Illinois Basin. It has an ash yield of less than 10%; much of it dominated by pervasive carbonate veining. The age of the thick coal in core D-2 is similar to that of the Elm Lick coal bed, found elsewhere in the Western Kentucky coalfield. The coals in D-3 are younger, having Stephanian palynomorph assemblages.     

Predicted CO2 emissions from maceral concentrates of high volatile bituminous Kentucky and Illinois coals

A large collection of well-characterized coals, documented in the Center for Applied Energy Research's (CAER) database, was used to estimate the CO₂ content of maceral concentrates from Kentucky and Illinois high volatile bituminous coals. The data showed no correlation between CO₂ versus coal ranks and between CO₂ versus maceral content. Subsequently, eight sets of low-ash density-gradient centrifugation (DGC) maceral concentrates from five coal beds were examined, spanning in the high volatile rank range. Heating value was not determined on the concentrates, but instead was calculated using the Mott–Spooner formula. There was a good correlation between predicted CO₂ and maceral content for the individual iso-rank (based on vitrinite reflectance, analyzed on whole (parent) coal) sets. In general, the predicted CO₂ increases from liptinite-rich through vitrinite-rich to inertinite-rich concentrates (note: no “concentrates” are absolutely monomaceral).     

Study of petrological characteristics of coal deposits from Marki-Jhari-Jamni area,Wardha valley coalfield,Maharashtra

A detailed study of maceral composition and vitrinite reflectance of the coal deposits from Marki-Jhari-Jamni area, situated in the northwestern extremity of Wardha valley coalfield, Yeotmal district, Maharashtra has been carried out with special reference to their depositional set up. These coals have two distinct types of maceral organization, one having significantly high distribution of the vitrinite group of macerals (35–41%) and the other containing the dominance of inertinite (26–49%). Liptinite maceral group is recorded between 14 and 24%, barring a few coal bands having liptinite maceral group as high as 33–37%. The vitrinite reflectivity ranges from 0.38–0.43%. Thus, they have attained sub-bituminous C rank. Mineral matter in these coals varies between 15 and 22%. The present study suggests that the basin primarily experienced cold climate having intermittent brackish water influx with alternating dry oxidizing spells.     

Study of petrological characteristics of coal deposits from Marki-Jhari-Jamni area, Wardha valley coalfield, Maharashtra

A detailed study of maceral composition and vitrinite reflectance of the coal deposits from Marki-Jhari-Jamni area, situated in the northwestern extremity of Wardha valley coalfield, Yeotmal district, Maharashtra has been carried out with special reference to their depositional set up. These coals have two distinct types of maceral organization, one having significantly high distribution of the vitrinite group of macerals (35–41%) and the other containing the dominance of inertinite (26–49%). Liptinite maceral group is recorded between 14 and 24%, barring a few coal bands having liptinite maceral group as high as 33–37%. The vitrinite reflectivity ranges from 0.38–0.43%. Thus, they have attained sub-bituminous C rank. Mineral matter in these coals varies between 15 and 22%. The present study suggests that the basin primarily experienced cold climate having intermittent brackish water influx with alternating dry oxidizing spells.     

Petrographical and thermo-chemical investigation of some North East Indian high sulphur coals

The Tertiary North East Indian coals, classified as sub-bituminous rank, have found less industrial application owing to their physico-chemical attributes. These coals are characterized by low ash (<15%), high volatile matter (>35%) and high sulphur (2.9-4.46%). Majority of the sulphur occurs in organic form affixed to the coal matrix owing to marine influence, is difficult to remove. The coal maceral analysis shows the dominance of vitrinite (>75%) with lesser amounts of liptinite and inertinite. Reflectance measurements (Rmax) of these sub-bituminous coals fall in the range of 0.57 to 0.65. In this study, the petrographical (maceral), thermal and other physico-chemical analyses of some low rank Tertiary sub-bituminous coals from north-east India were carried out to assess their potential for combustion, liquefaction and coal bed methane formation. The petrofactor, conversion (%) and oil yield (%), combustion efficiency of the coal samples were determined. The respective linear correlations of conversion (%) of the coals with their vitrinite contents, petrofactor and oil yield values have been discussed. The relative combustion efficiency of the coals was measured from the thermo gravimetric analysis (TGA) of coals. The influence of maceral composition upon gas adsorption characteristics of these high volatile coals showed the increase in methane adsorption with vitrinite enrichment. Both the maceral and mineral matter contents were observed to have important influence on the gas adsorption characteristics.     

Coalification of organic matter in coal balls of the Pennsylvanian (upper Carboniferous) of the Illinois Basin, United States

An evaluation was made of the degree of coalification of two coal balls from the Illinois Basin of the Pennsylvanian (upper Carboniferous) of the United States. Previous interpretations are mainly misleading and contradictory, primarily because of the assumption that the brown color and exceptional cellular and subcellular preservation typical of American coal balls imply chemical preservation of cellulose and lignin, the primary components of peat. Xylem tissue from a medullosan seed fern contained in a coal ball and the coal attached to the coal ball from the Calhoun coal bed, Mattoon Formation, Illinois, was analyzed by elemental, petrographic, and nuclear magnetic resonance (NMR) techniques to determine the degree of coalification. The NMR and elemental data indicate the lack of cellulose and lignin and a probable rank of high-volatile C bituminous coal. These data corroborate data for a coal ball from the Herrin (No. 6) coal bed (Carbondale Formation, Middle Pennsylvanian) and support our hypothesis that the organic matter in coal balls of the Pennsylvanian strata of the United States is coalified to about the same degree as the surrounding coal. Data presented show a range of lower reflectances for xylem tissue and vitrinite in the analyzed coal balls compared with vitrinite in the attached coal.The data reported indicate that physical preservation of organic matter in coal balls does not imply chemical preservation. Also our study supports the hypothesis that compactional (static load) pressure is not a prerequisite for coalification up to a rank of high-volatile C bituminous coal.A whole-rock analysis of the Calhoun coal ball indicates a similarity to other carbonate coal balls from the United States. It consists primarily of calcium carbonate and 1–2% organic matter; silica and alumina together make up less than 0.5%, indicating the lack of minerals such as quartz and clays.     

Petrographic properties of major coal seams in Turkey and their formation

Most types of coal in Turkey are generally low in rank: lignite, and subbituminous. Most of the coal was formed during the Miocene, Eocene, and Pliocene ages. There are only a few thin Jurassic-age coal occurrences in Turkey. Pennsylvanian age bituminous coal is found on the Black Sea coast. General implications of the petrographic properties of Turkey's coal seams and coal deposits have not yet been taken into consideration comparatively or as a whole.For this study, about 190 channel samples were collected from different locales. The composite profile samples of the seams were taken into considerations. The content and depositional properties as well as some chemical and physical properties of the main coal seams are compared. All coal samples tend to have similar coal petrographic properties and were deposited in intermontane lacustrine basins. Later, they were affected by faulting and post-depositional volcanic activity. As a result, there are variations in the properties and rank of the coal samples. The most abundant coal maceral group is huminite and the most abundant maceral is gelinite. The liptinite and inertinite contents of the coal are low and the maceral contents of the coals show great similarity. The depositional environments of the all coals are lacustrine dominated.     

The geology, petrology and geochemistry of coal seams from the St. Rose and Chimney Corner coalfields, Cape Breton, Nova Scotia, Canada

Seams from the St. Rose and Chimmey Corner coalfields, Nova Scotia, Canada, were sampled and examined for petrographic and geochemical composition. Rank determinations indicate a rank of high volatile C-B bituminous. Seams show regular alternations of dull and bright microbanded lithotypes, with dull lithotypes predominant in the central portion of the main seam (No. 5 seam). Brighter lithotypes are dominated by vitrinite (>80%), with minor inertinite (avg. 12%) and minor liptinite. Duller lithotypes contain greater amounts of inertinite (up to 40%) and liptinite (primarily sporinite). Mineral matter consists of epigenetic pyrite, with lesser amounts of clay and quartz. Cabonates are common in the Chimney Corner seams. Elemental composition of the seams is similar to other Canadian coals and fall within world coal ranges, with the exception of high concentrations of Cl, Zn, Ni, Mo, Pb, Cu and As.Depositional environment of the seams as indicated by maceral composition, lithotypes and geology suggest a predominance of wet forest to reed moor conditions, in a fluvial-lacustrine setting. Periodic episodes of flooding and drying are indicated by lithotype, maceral and mineral variations.     

Secretinite—reflectance and chemical data from two high volatile bituminous coals (Upper Carboniferous) of North America

Secretinite—a maceral of the inertinite group as recognized by the ICCP in 1996—is a noncellular maceral of seed fern origin. New reflectance data indicate that this maceral has primary anisotropy with bireflectances of 0.4% to 0.9% in high-volatile B bituminous (Ro=0.6%) Carboniferous coal of North America. The highest reflectance is in cross-section as opposed to longitudinal section. Characteristic feature of secretinite is the virtual absence of Si and Al, unlike that in associated vitrinite. This indicates the absence of submicron aluminosilicates in secretinite and their presence in vitrinites. Secretinite is highly aromatic as indicated by low O/C ratios and high contribution of aromatic hydrogen bands detected by FTIR analysis.     

Initial volatilization temperatures and average volatilization rates of coal — Their relationship to coal rank and other characteristics

Two thermal parameters, initial volatilization temperature (IVT) and average volatilization rate (AVR), have been determined by thermogravimetric analysis in argon for 38 coal samples ranging in rank from lignite to low-volatile bituminous. Both IVT and AVR are correlated with percent volatile matter and vitrinite reflectance.The IVT values increase gradually from about 250 to 445°C with increasing rank; however, a change in slope is observed in the region of high-volatile bituminous coals (from about 340°C to about 380°C) when IVT's are plotted against percent volatile matter or percent fixed carbon. The changes in slope near 340°C and near 380°C occur at “coalification jumps” recognized on the basis of changes in the optical and chemical character of the macerals. In general, AVR values decrease gradually with increasing rank for the lignite and sub-bituminous coals and for the medium- and low-volatile bituminous coals; however, a sharp increase in AVR occurs in high-volatile bituminous coals. The change in slope of the IVT curves and sharp increase in the AVR values for high-volatile bituminous coals reflect the development of new, higher vapor pressure organic compounds produced during this stage of the coalification process.A plot of AVR vs IVT reveals three regions which correspond to: (1) lignite and sub-bituminous coals; (2) high-volatile bituminous coals; and (3) medium- to low-volatile bituminous coals.     

Methane and carbon dioxide sorption on a set of coals from India

Complete sorption isotherm characteristics of methane and CO₂ were studied on fourteen sub-bituminous to high-volatile bituminous Indian Gondwana coals. The mean vitrinite reflectance values of the coal samples are within the range of 0.64% to 1.30% with varying maceral composition. All isotherms were conducted at 30 °C on dry, powdered coal samples up to a maximum experimental pressure of ~ 7.8 MPa and 5.8 MPa for methane and CO₂, respectively.The nature of the isotherms varied widely within the experimental pressure range with some of the samples remained under-saturated while the others attained saturation. The CO₂ to methane adsorption ratios decreased with the increase in experimental pressure and the overall variation was between 4:1 and 1.5:1 for most of the coals. For both methane and CO₂, the lower-ranked coal samples generally exhibited higher sorption affinity compared to the higher-ranked coals. However, sorption capacity indicates a U-shaped trend with rank. Significant hysteresis was observed between the ad/desorption isotherms for CO₂. However, with methane, hysteresis was either absent or insignificant. It was also observed that the coal maceral compositions had a significant impact on the sorption capacities for both methane and CO₂. Coals with higher vitrinite contents showed higher capacities while internite content indicated a negative impact on the sorption capacity.     

Studies of the relationship between coal petrology and grinding properties

The maceral and microlithotype composition of selected coals has been investigated with respect to the grinding properties, specifically Hardgrove grindability index (HGI), of the coals. The study expands upon previous investigations of HGI and coal petrology by adding the dimension of the amount and composition of the microlithotypes. Coal samples, both lithotypes and whole channels, were selected from restricted rank ranges based on vitrinite maximum reflectance: 0.75–0.80% R_max, 0.85–0.90% R_max and 0.95–1.00% R_max. In this manner, the influence of petrographic composition can be isolated from the influence of rank. Previous investigations of high volatile bituminous coals demonstrated that, while rank is an important factor in coal grindability, the amount of liptinite and liptinite-rich microlithotypes is a more influential factor. In this study, we provide further quantitative evidence for the influence of microlithotypes on HGI and, ultimately, on pulverizer performance.