Peak‐temperature patterns of polyphase metamorphism resulting from accretion,subduction and collision (eastern Tauern Window,European Alps) – a study with Raman microspectroscopy on carbonaceous material (RSCM)

Raman microspectroscopy on carbonaceous material (RSCM) from the eastern Tauern Window indicates contrasting peak‐temperature patterns in three different fabric domains, each of which underwent a poly‐metamorphic orogenic evolution: Domain 1 in the northeastern Tauern Window preserves oceanic units (Glockner Nappe System, Matrei Zone) that attained peak temperatures (T_p) of 350–480 °C following Late Cretaceous to Palaeogene nappe stacking in an accretionary wedge. Domain 2 in the central Tauern Window experienced T_p of 500–535 °C that was attained either within an exhumed Palaeogene subduction channel or during Oligocene Barrovian‐type thermal overprinting within the Alpine collisional orogen. Domain 3 in the Eastern Tauern Subdome has a peak‐temperature pattern that resulted from Eo‐Oligocene nappe stacking of continental units derived from the distal European margin. This pattern acquired its presently concentric pattern in Miocene time due to post‐nappe doming and extensional shearing along the Katschberg Shear Zone System (KSZS). T_p values in the largest (Hochalm) dome range from 612 °C in its core to 440 °C at its rim. The maximum peak‐temperature gradient (≤70 °C km^?1) occurs along the eastern margin of this dome where mylonitic shearing of the Katschberg Normal Fault (KNF) significantly thinned the Subpenninic‐ and Penninic nappe pile, including the pre‐existing peak‐temperature gradient.     

Thermomechanical evolution of the high‐grade core in the nappe zone of Variscan Sardinia,Italy: the role of shear deformation and granite emplacement

In the nappe zone of the Sardinian Variscan chain, the deformation and metamorphic grade increase throughout the tectonic nappe stack from lower greenschist to upper amphibolite facies conditions in the deepest nappe, the Monte Grighini Unit. A synthesis of petrological, structural and radiometric data is presented that allows us to constrain the thermal and mechanical evolution of this unit. Carboniferous subduction under a low geothermal gradient (~490–570 °C GPa^?1) was followed by exhumation accompanied by heating and Late Carboniferous magma emplacement at a high apparent geothermal gradient (~1200–1450 °C GPa^?1). Exhumation coeval with nappe stacking was closely followed by activity on a ductile strike‐slip shear zone that accommodated magma intrusion and enabled the final exhumation of the Monte Grighini Unit to upper crustal levels. The reconstructed thermo‐mechanical evolution allows a more complete understanding of the Variscan orogenic wedge in central Sardinia. As a result we are able to confirm a diachronous evolution of metamorphic and tectonic events from the inner axial zone to the outer nappe zone, with the Late Variscan low‐P/high‐T metamorphism and crustal anatexis as a common feature across the Sardinian portion of the Variscan orogen.     

Cretaceous and Cenozoic cooling history of the eastern Qilian Shan,north‐eastern margin of the Tibetan Plateau: evidence from apatite fission‐track analysis

The exhumation history and tectonic evolution of the Qilian Shan at the north‐eastern margin of the Tibetan Plateau has been widely debated. Here, we present apatite fission‐track (AFT) data for 12 Ordovician granodiorite samples along a vertical transect in the eastern Qilian Shan. These thermochronometry data indicate that the eastern Qilian Shan experienced a three‐stage cooling history, including: (i) rapid initial cooling in the late Cretaceous; (ii) a stage of quasi isothermal quiescence from ~ 80 to 24 Ma; and (iii) rapid subsequent cooling beginning in the early Miocene. The inferred cooling rates for the three stages are 6.8 ± 4.9 °C Ma^?1, 0.6 ± 0.2 °C Ma^?1 and 2.7 ± 0.9 °C Ma^?1 respectively (±1 σ). Assuming a geothermal gradient of 25 °C km^?1, the exhumation rates for the three stages are 0.27 ± 0.20 mm a^?1, 0.017 ± 0.007 mm a^?1 and 0.11 ± 0.04 mm a^?1 respectively (±1 σ). We suggest that the late Cretaceous cooling records collision of the Lhasa block with the Eurasian continent and that the Miocene cooling represents uplift/exhumation of the Qilian Shan.     

Petrological constraints on the tectonic setting of the Kathmandu Nappe in the Langtang–Gosainkund–Helambu regions,Central Nepal Himalaya

The Gosainkund–Helambu region in central Nepal occupies a key area for the development of Himalayan kinematic models, connecting the well‐investigated Langtang area to the north with the Kathmandu Nappe (KN), whose interpretation is still debated, to the south. In order to understand the structural and metamorphic architecture of the Greater Himalayan Sequence (GHS) in this region, a detailed petrological study was performed, focusing on selected metapelite samples from both the Gosainkund–Helambu and Langtang transects. The structurally lowest sample investigated belongs to the Lesser Himalayan Sequence; its metamorphic evolution is characterized by a narrow hairpin P–T path with peak P–T conditions of 595 ± 25 °C, 7.5 ± 1 kbar. All of the other samples here investigated belong to the GHS. Along the Langtang section, two tectono‐metamorphic units have been distinguished within the GHS: the Lower Greater Himalayan Sequence (L‐GHS), characterized by peak P–T conditions at 728 ± 11 °C, 10 ± 0.5 kbar (corresponding to a T/depth ratio of 22 ± 1 °C km^?1), and the structurally higher Upper Greater Himalayan Sequence, with peak metamorphic conditions at 780 ± 20 °C, 7.8 ± 0.8 kbar (corresponding to a T/depth ratio of 31 ± 4 °C km^?1). This confirms the existence of a main tectono‐metamorphic discontinuity within the GHS, as previously suggested by other authors. The results of petrological modelling of the metapelites from the Gosainkund–Helambu section show that this region is entirely comprised within a sub‐horizontal and thin L‐GHS unit: the estimated peak metamorphic conditions of 734 ± 19 °C, 10 ± 0.8 kbar correspond to a uniform T/depth ratio of 23 ± 3 °C km^?1. The metamorphic discontinuity identified along the Langtang transect and dividing the GHS in two tectono‐metamorphic units is located at a structural level too high to be intersected along the Gosainkund–Helambu section. Our results have significant implications for the interpretation of the KN and provide a contribution to the more general discussion of the Himalayan kinematic models. We demonstrate that the structurally lower unit of the KN (known as Sheopuri Gneiss) can be correlated with the L‐GHS unit; this result strongly supports those models that correlate the KN to the Tethyan Sedimentary Sequence and that suggest the merging of the South Tibetan Detachment System and the Main Central Thrust on the northern side of the KN. Moreover we speculate that, in this sector of the Himalayan chain, the most appropriate kinematic model able to explain the observed tectono‐metamorphic architecture of the GHS is the duplexing model, or hybrid models which combine the duplexing model with another end‐member model.     

Petrological and geochronological constraints on lower crust exhumation during Paleoproterozoic (Eburnean) orogeny,NW Ghana,West African Craton

New petrological and geochronological data are presented on high‐grade ortho‐ and paragneisses from northwestern Ghana, forming part of the Paleoproterozoic (2.25–2.00 Ga) West African Craton. The study area is located in the interference zone between N–S and NE–SW‐trending craton‐scale shear zones, formed during the Eburnean orogeny (2.15–2.00 Ga). High‐grade metamorphic domains are separated from low‐grade greenstone belts by high‐strain zones, including early thrusts, extensional detachments and late‐stage strike‐slip shear zones. Paragneisses sporadically preserve high‐pressure, low‐temperature (HP–LT) relicts, formed at the transition between the blueschist facies and the epidote–amphibolite sub‐facies (10.0–14.0 kbar, 520–600 °C), and represent a low (~15 °C km^?1) apparent geothermal gradient. Migmatites record metamorphic conditions at the amphibolite–granulite facies transition. They reveal a clockwise pressure–temperature–time (P–T–t) path characterized by melting at pressures over 10.0 kbar, followed by decompression and heating to peak temperatures of 750 °C at 5.0–8.0 kbar, which fit a 30 °C km^?1 apparent geotherm. A regional amphibolite facies metamorphic overprint is recorded by rocks that followed a clockwise P–T–t path, characterized by peak metamorphic conditions of 7.0–10.0 kbar at 550–680 °C, which match a 20–25 °C km^?1 apparent geotherm. These P–T conditions were reached after prograde burial and heating for some rock units, and after decompression and heating for others. The timing of anatexis and of the amphibolite facies metamorphic overprint is constrained by in‐situ U–Pb dating of monazite crystallization at 2138 ± 7 and 2130 ± 7 Ma respectively. The new data set challenges the interpretation that metamorphic breaks in the West African Craton are due to diachronous Birimian ‘basins’ overlying a gneissic basement. It suggests that the lower crust was exhumed along reverse, normal and transcurrent shear zones and juxtaposed against shallow crustal slices during the Eburnean orogeny. The craton in NW Ghana is made of distinct fragments with contrasting tectono‐metamorphic histories. The range of metamorphic conditions and the sharp lateral metamorphic gradients are inconsistent with ‘hot orogeny’ models proposed for many Precambrian provinces. These findings shed new light on the geodynamic setting of craton assembly and stabilization in the Paleoproterozoic. It is suggested that the metamorphic record of the West African Craton is characteristic of Paleoproterozoic plate tectonics and illustrates a transition between Archean and Phanerozoic orogens.     

Reworking of the Gangdese magmatic arc,southeastern Tibet: post‐collisional metamorphism and anatexis

The Gangdese magmatic arc, southeastern Tibet, was built by mantle‐derived magma accretion and juvenile crustal growth during the Mesozoic to Early Cenozoic northward subduction of the Neo‐Tethyan oceanic slab beneath the Eurasian continent. The petrological and geochronological data reveal that the lower crust of the southeastern Gangdese arc experienced Oligocene reworking by metamorphism, anatexis and magmatism after the India and Asia collision. The post‐collisional metamorphic and migmatitic rocks formed at 34–26 Ma and 28–26 Ma respectively. Meta‐granitoids have protolith ages of 65–38 Ma. Inherited detrital zircon from metasedimentary rocks has highly variable ages ranging from 2708 to 37 Ma. These rocks underwent post‐collisional amphibolite facies metamorphism and coeval anatexis under P–T conditions of ~710–760 °C and ~12 kbar with geothermal gradients of 18–20 °C km ^{? 1}, indicating a distinct crustal thickening process. Crustal shortening, thickening and possible subduction erosion due to the continental collision and ongoing convergence resulted in high‐P metamorphic and anatectic reworking of the magmatic and sedimentary rocks of the deep Gangdese arc. This study provides a typical example of the reworking of juvenile and ancient continental crust during active collisional orogeny.     

Metamorphic inheritance of Rheic passive margin evolution and its early‐Variscan overprint in the Teplá‐Barrandian Unit,Bohemian Massif

Rift‐related regional metamorphism of passive margins is usually difficult to observe on the surface, mainly due to its strong metamorphic overprint during the subsequent orogenic processes that cause its exposure. However, recognition of such a pre‐orogenic evolution is achievable by careful characterization of the polyphase tectono‐metamorphic record of the orogenic upper plate. A multidisciplinary approach, involving metamorphic petrology, P–T modelling, structural geology and in situ U‐Pb monazite geochronology using laser‐ablation split‐stream inductively coupled plasma mass spectrometry, was applied to unravel the polyphase tectono‐metamorphic record of metapelites at the western margin of the Teplá‐Barrandian domain in the Bohemian Massif. The study resulted in discovery of three tectono‐metamorphic events. The oldest event M1 is LP–HT regional metamorphism with a geothermal gradient between 30 and 50 °C km^?1, peak temperatures up to 650 °C and of Cambro‐Ordovician age (c. 485 Ma). The M1 event was followed by M2‐D2, which is characterized by a Barrovian sequence of minerals from biotite to kyanite and a geothermal gradient of 20–25 °C km^?1. D2‐M2 is associated with a vertical fabric S2 and was dated as Devonian (c. 375 Ma). Finally, the vertical fabric S2 was overprinted by a D3‐M3 event that formed sillimanite to chlorite bearing gently inclined fabric S3 also of Devonian age. The high geothermal gradient of the M1 event can be explained as the result of an extensional, rift‐related tectonic setting. In addition, restoration of the deep architecture and polarity of the extended domain before the Devonian history – together with the supracrustal sedimentary and magmatic record – lead us to propose a model for formation of an Ordovician passive continental margin. The subsequent Devonian evolution is interpreted as horizontal shortening of the passive margin at the beginning of Variscan convergence, followed by detachment‐accommodated exhumation of lower‐crustal rocks. Both Devonian shortening and detachment occurred in the upper plate of a Devonian subduction zone. The tectonic evolution presented in this article modifies previous models of the tectonic history of the western margin of the Teplá‐Barrandian domain, and also put constraints on the evolution of the southern margin of the Rheic ocean from the passive margin formation to the early phases of Variscan orogeny.     

The tectono‐metamorphic evolution of the very low‐grade hangingwall constrains two‐stage gneiss dome formation in the Montagne Noire (Southern France)

The Montagne Noire in the southernmost French Massif Central is made of an ENE‐elongated gneiss dome flanked by Palaeozoic sedimentary rocks. The tectonic evolution of the gneiss dome has generated controversy for more than half a century. As a result, a multitude of models have been proposed that invoke various tectonic regimes and exhumation mechanisms. Most of these models are based on data from the gneiss dome itself. Here, new constraints on the dome evolution are provided based on a combination of very low‐grade petrology, K–Ar geochronology, field mapping and structural analysis of the Palaeozoic western Mont Peyroux and Faugères units, which constitute part of the southern hangingwall of the dome. It is shown that southward‐directed Variscan nappe‐thrusting (D₁) and a related medium‐P metamorphism (M₁) are only preserved in the area furthest away from the gneiss dome. The regionally dominant pervasive tectono‐metamorphic event D₂/M₂ largely transposes D₁ structures, comprises a higher metamorphic thermal gradient than M₁ (transition low‐P and medium‐P metamorphic facies series) and affected the rocks between c. 309 and 300 Ma, post‐dating D₁/M₁ by more than 20 Ma. D₂‐related fabrics are refolded by D₃, which in its turn, is followed by dextral‐normal shearing along the basal shear zone of both units at c. 297 Ma. In the western Mont Peyroux and Faugères units, D₂/M₂ is largely synchronous with shearing along the southern dome margin between c. 311 and 303 Ma, facilitating the emplacement of the gneiss dome into the upper crust. D₂/M₂ also overlaps in time with granitic magmatism and migmatization in the Zone Axiale between c. 314 and 306 Ma, and a related low‐P/high‐T metamorphism at c. 308 Ma. The shearing that accompanied the exhumation of the dome therefore was synchronous with a peak in temperature expressed by migmatization and intrusion of melts within the dome, and also with the peak of metamorphism in the hangingwall. Both, the intensity of D₂ fabrics and the M₂ metamorphic grade within the hangingwall, decrease away from the gneiss dome, with grades ranging from the anchizone–epizone boundary to the diagenetic zone. The related zonation of the pre‐D₃ metamorphic field gradients paralleled the dome. These observations indicate that D₂/M₂ is controlled by the exhumation of the Zone Axiale, and suggest a coherent kinematic between the different crustal levels at some time during D₂/M₂. Based on integration of these findings with regional geological constraints, a two‐stage exhumation of the gneiss dome is proposed: during a first stage between c. 316 and 300 Ma dome emplacement into the upper crust was controlled by dextral shear zones arranged in a pull‐apart‐like geometry. The second stage from 300 Ma onwards was characterized by northeast to northward extension, with exhumation accommodated by north‐dipping detachments and hangingwall basin formation along the northeastern dome margin.     

Variation in peak P–T conditions across the upper contact of the UHP terrane,Dabieshan, China: gradational or abrupt?

The Southern Dabieshan Terrane (SDT) has previously been divided into high‐pressure (HP) and ultrahigh‐pressure (UHP) terranes, and its regional extent and the tectonic nature of its boundaries are hotly debated topics. In this study, an eclogite‐bearing area of 100 km² near Taihu is mapped in detail, and divided into Northern, Middle and Southern Zones on the basis of lithological characteristics. The Northern Zone consists of epidote‐biotite gneiss and eclogite blocks, the Middle Zone includes granitic gneiss, biotite gneiss, eclogites and amphibolite, and the Southern Zone is composed mainly of garnet‐bearing mica schist. The eclogites occur mainly as lens or blocks in the Northern and Middle Zones. The peak P–T conditions for 61 eclogite samples across the area are estimated using the Grt‐Cpx Fe²⁺‐Mg thermometers and the Grt‐Cpx‐Phe barometers. The results indicate three different P–T regions: 2.82–4.09 GPa/759–942 °C in the Northern Zone, and 2.00–3.54 GPa/641–839 °C in the granitic gneiss and 1.38–2.36 GPa/535–768 °C in the biotite gneiss from the Middle Zone. Combined with the spatial distribution of eclogites across the area, the P–T values for eclogites increase continuously from the south to the north, defining a reference ‘geotherm’ of 5 °C km^?1. However, some unreasonable apparent gradients can be established along two south–north profiles across the area, and display a P–T difference between the Northern and Middle zones. On the basis of the average P–T data for eclogites across the area, a gap of at least 0.3 GPa/20 °C exists between the Northern and Middle zones. By contrast, the P–T values of eclogites from the Middle zone show a coherent pattern with transitional characteristics from HP in the south to UHP in the north. We suggest that the SDT was a coherent slab during subduction, and was broken up by a major fault during exhumation, which was formed under UHP metamorphic conditions.     

New P–T constraints on the Tamayen glaucophane‐bearing rocks,eastern Taiwan: Perple_X modelling results and geodynamic implications

New pseudosection modelling was applied to better constrain the P–T conditions and evolution of glaucophane‐bearing rocks in the Tamayen block of the Yuli belt, recognized as the world's youngest known blueschist complex. Based on the predominant clinoamphibole, textural relationships, and mineral compositions, these glaucophane‐bearing high‐P rocks can be divided into four types. We focused on the three containing garnet. The chief phase assemblages are (in decreasing mode): amphibole + quartz + epidote + garnet + chlorite + rutile/titanite (Type‐I), phengite + amphibole + quartz + garnet + chlorite + epidote + titanite + biotite + magnetite (Type‐II), and amphibole + quartz + albite + epidote + garnet + rutile + hematite + titanite (Type‐III). Amphibole exhibits compositional zoning from core to rim as follows: glaucophane → pargasitic amphibole → actinolite (Type‐I), barroisite → Mg‐katophorite/taramite → Fe‐glaucophane (Type‐II), glaucophane → winchite (Type‐III). Using petrographic data, mineral compositions and Perple_X modelling (pseudosections and superimposed isopleths), peak P–T conditions were determined as 13 ± 1 kbar and 550 ± 40 °C for Type‐I, 10.5 ± 0.5 kbar and 560 ± 30 °C for Type‐II (thermal peak) and 11 ± 1 kbar and 530 ± 30 °C for Type‐III. The calculations yield higher pressures and temperatures than previously thought; the difference is ~1–6 kbar and 50–200 °C. The three rock types record similar P–T retrograde paths with clockwise trajectories; all rocks followed trajectories with substantial pressure decrease under near‐isothermal conditions (Type‐I and Type‐III), with the probable exception of Type‐II where decompression followed colder geotherms. The P–T paths suggest a tectonic environment in which the rocks were exhumed from maximum depths of ~45 km within a subduction channel along a relative cold geothermal gradient of ~11–14 °C km^?1.     

Timing of UHP exhumation and rock fabric development in gneiss domes containing the world's youngest eclogite Facies rocks,southeastern Papua New Guinea

The youngest known ultrahigh‐pressure (UHP) rocks in the world occur in the Woodlark Rift of southeastern Papua New Guinea. Since their crystallization in the Late Miocene to Early Pliocene, these eclogite facies rocks have been rapidly exhumed from mantle depths to the surface and today they remain in the still‐active geodynamic setting that caused this exhumation. For this reason, the rocks provide an excellent opportunity to study rates and processes of (U)HP exhumation. We present New Rb–Sr results from 12 rock samples from eclogite‐bearing gneiss domes in the D'Entrecasteaux Islands, and use those results to examine the time lag between (U)HP metamorphism and later ductile thinning, penetrative fabric development and accompanying metamorphic retrogression at amphibolite facies conditions during their exhumation. A Rb–Sr age for a sample of mafic eclogite (with no preserved coesite) from the core zone of the Mailolo gneiss dome (Fergusson Island) provides a new estimate of the timing of HP metamorphism (5.6 ± 1.6 Ma). The strongly deformed quartzofeldspathic and granitic gneisses (90–95% by volume) that enclose variably retrogressed relict blocks of mafic eclogite (5–10% by volume) yield Rb–Sr isochron ages from 4.4 to 2.4 Ma. For the UHP‐bearing gneisses of Mailolo dome, previously published U–Pb ages on zircon and our Rb–Sr isochron ages are consistent with a mean time lag of 2.2 ± 1.5 Ma (~95% c.i.) for passage of the rock between eclogite and amphibolite facies conditions. New thermobarometric data indicate that the main syn‐exhumational foliation developed at amphibolite facies conditions of 630–665 °C and 12.1–14.4 kbar. These pressure estimates indicate that the lower crust of the Woodlark Rift was unusually thick (>40 km) at the time of the amphibolite facies overprint, possibly as a result of accumulation and underplating of UHP‐derived material from below. Our data imply a minimum unroofing rate of 10 ± 7 mm year^?1 (~95% c.i.) for the (U)HP body from minimum HP depths (73 ± 7 km) to lower crustal depths. This minimum unroofing rate reinforces previous inferences that the exhumation from the mantle to the surface of the gneiss domes in the D'Entrecasteaux Islands took place at plate tectonic rates. On the basis of previous structural studies and the new thermobarometry, we attribute the high (cm year^?1) exhumation to diapiric ascent of the partially molten terrane from mantle depths, with a secondary contribution from pure shear thinning of the terrane after its arrival in the crust.     

Late‐stage orogenic loading revealed by contact metamorphism in the northern Appalachians,New York

Pelitic schists from contact aureoles surrounding mafic–ultramafic plutons in Westchester County, NY record a high‐P (~0.8 GPa) high‐T (~790 °C) contact overprint on a Taconic regional metamorphic assemblage (~0.5 GPa). The contact metamorphic assemblage of a pelitic sample in the innermost aureole of the Croton Falls pluton, a small (<10 km²) gabbroic body, consists of quartz–plagioclase–biotite–garnet–sillimanite–ilmenite–graphite–Zn‐rich Al‐spinel. Both K‐feldspar and muscovite are absent, and abundant biotite, plagioclase, sillimanite, quartz and ilmenite inclusions are found within subhedral garnet crystals. Unusually low bulk‐rock Na and K contents imply depletion of alkalic components and silica through anatexis and melt extraction during contact heating relative to typical metapelites outside the aureole. Thermobarometry on nearby samples lacking a contact overprint yields 620–640 °C and 0.5–0.6 GPa. In the aureole sample, WDS X‐ray chemical maps show distinct Ca‐enriched rims on both garnet and matrix plagioclase. Furthermore, biotite inclusions within garnet have significantly higher Mg concentration than matrix biotite. Thermobarometry using GASP and garnet–biotite Mg–Fe exchange equilibria on inclusions and adjacent garnet host interior to the high‐Ca rim zone yield ~0.5 ± 0.1 GPa and ~620 ± 50 °C. Pairs in the modified garnet rim zone yield ~0.9 ± 0.1 GPa and ~790 ± 50 °C. Thermocalc average P–T calculations yield similar results for core (~0.5 ± ~0.1 GPa, ~640 ± ~80 °C) and rim (~0.9 ± ~0.1 GPa, ~800 ± ~90 °C) equilibria. The core assemblages are interpreted to record the P–T conditions of peak metamorphism during the Taconic regional event whereas the rim compositions and matrix assemblages are interpreted to record the P–T conditions during the contact event. The high pressures deduced for this later event are interpreted to reflect loading due to the emplacement of Taconic allochthons in the northern Appalachians during the waning stages of regional metamorphism (after c. 465 Ma) and before contact metamorphism (c. 435 Ma). In the absence of contact metamorphism‐induced recrystallization, it is likely that this regional‐scale loading would remain cryptic or unrecorded.     

Constraining the conditions of Barrovian metamorphism in Sikkim,India: P–T–t paths of garnet crystallization in the Lesser Himalayan Belt

Garnet crystallization in metapelites from the Barrovian garnet and staurolite zones of the Lesser Himalayan Belt in Sikkim is modelled utilizing Gibbs free energy minimization, multi‐component diffusion theory and a simple nucleation and growth algorithm. The predicted mineral assemblages and garnet‐growth zoning match observations remarkably well for relatively tight, clockwise metamorphic P–T paths that are characterized by prograde gradients of ～30 °C kbar^?1 for garnet‐zone rocks and ～20 °C kbar^?1 for rocks from the staurolite zone. Estimates for peak metamorphic temperature increase up‐structure toward the Main Central Thrust. According to our calculations, garnet stopped growing at peak pressures, and protracted heating after peak pressure was absent or insignificant. Almost identical P–T paths for the samples studied and the metamorphic continuity of the Lesser Himalayan Belt support thermo‐mechanical models that favour tectonic inversion of a coherent package of Barrovian metamorphic rocks. Time‐scales associated with the metamorphism were too short for chemical diffusion to substantially modify garnet‐growth zoning in rocks from the garnet and staurolite zones. In general, the pressure of initial garnet growth decreases, and the temperature required for initial garnet growth was reached earlier, for rocks buried closer toward the MCT. Deviations from this overall trend can be explained by variations in bulk‐rock chemistry.     

Blueschist facies metamorphism in Nordenskiöld Land of west‐central Svalbard

Recent fieldwork in Nordenskiöld Land, Svalbard's Southwestern Basement Province, has established the presence of high‐pressure (HP) lithologies. They are strongly retrogressed blueschists consisting mainly of garnet and Ca‐amphibole with remnants of ferroglaucophane and phengite. The pressure–temperature (P–T) conditions were estimated using phase equilibrium modelling in the NCKFMMnASHTO system. P–T estimates based on the garnet, phengite and ferroglaucophane compositional isopleths and modelled paragenetic assemblage indicate peak metamorphism at 470–490 °C and 14–18 kbar. These data fall close to the 7–8 °C km^?1 geotherm, which is similar to that from Motalafjella, the only previously known occurrence of blueschists in Svalbard's Caledonides. The newly discovered blueschists could have formed during the early stage of the Caledonian Orogeny and may represent a vestige of missing marginal basins of the western Iapetus developed at the onset of subduction. The likely counterpart to Svalbard's blueschists is the ophiolitic sequence in the Pearya Terrane of northern Ellesmere Island.     

Triassic to Early Jurassic (c. 200 Ma) UHP metamorphism in the Central Rhodopes: evidence from U–Pb–Th dating of monazite in diamond‐bearing gneiss from Chepelare (Bulgaria)

Evidence for ultrahigh‐pressure metamorphism (UHPM) in the Rhodope metamorphic complex comes from occurrence of diamond in pelitic gneisses, variably overprinted by granulite facies metamorphism, known from several areas of the Rhodopes. However, tectonic setting and timing of UHPM are not interpreted unanimously. Linking age to a metamorphic stage is a prerequisite for reconstruction of these processes. Here, we use monazite in diamond‐bearing gneiss from Chepelare (Bulgaria) to date the diamond‐forming UHPM event in the Central Rhodopes. The diamond‐bearing gneiss comes from a strongly deformed, lithologically heterogeneous zone (Chepelare Mélange) sandwiched between two migmatized orthogneiss units, known as Arda‐I and Arda‐II. Diamond, identified by Raman micro‐spectroscopy, shows the characteristic band mostly centred between 1332 and 1330 cm^?1. The microdiamond occurs as single grains or polyphase diamond + carbonate inclusions, rarely with CO₂. Thermodynamic modelling shows that garnet was stable at UHP conditions of 3.5–4.6 GPa and 700–800 °C, in the stability field of diamond, and was re‐equilibrated at granulite facies/partial melting conditions of 0.8–1.2 GPa and 750–800 °C. The texture of monazite shows older central parts and extensive younger domains which formed due to metasomatic replacement in solid residue and/or overgrowth in melt domains. The monazite core compositions, with distinctly lower Y, Th and U contents, suggest its formation in equilibrium with garnet. The U–Th–Pb dating of monazite using electron microprobe analysis yielded a c. 200 Ma age for the older cores with low Th, Y, U and high La/Nd ratio, and a c. 160 Ma age for the dominant younger monazite enriched in Th, Y, U and HREE. The older age of c. 200 Ma is interpreted as the timing of UHPM, whereas the younger age of c. 160 Ma as granulite facies/partial melting overprint. Our results suggest that UHPM occurred in Late Triassic to Early Jurassic time, in the framework of collision and subduction of continental crust after the closure of Paleotethys.     

Stable staurolite–cordierite assemblages in K‐poor metapelitic schists in Aston and Hospitalet gneiss domes of the central Pyrenees (France,Andorra)

Staurolite–cordierite assemblages are common in mica schists of the Aston and Hospitalet gneiss domes of the central Axial Zone, Pyrenees (France, Andorra). Within a 200 m wide zone, staurolite, cordierite and andalusite porphyroblasts contain inclusion trails that preserve the same stage of development of a crenulation cleavage, strongly suggesting that all three phases are contemporaneous. Their syntectonic growth occurred during a short period at the beginning of the formation of the dominant schistosity (S₂) of the domes. Staurolite and cordierite touching each other further indicates an equilibrium relationship. Whole‐rock analyses show that some staurolite–cordierite schists are depleted in K₂O compared to post‐Archean shales (PAAS) and amphibolite facies pelites. Analysis of the st‐crd paragenesis in K‐poor schists without muscovite using KFMASH and MnNCKFMASH petrogentic grids, pseudosections and AFM compatibility diagrams predicts stable conditions at pressures of ~3.5 kbar at 575 °C. For metapelites with intermediate X_Mg values (0.7 >  X_Mg >0.48) a ‘muscovite‐out window’ exists from 550–650 °C at 3.5 kbar in the KFMASH system. Conventional thermobarometry (GB‐GASP, AvT‐AvP) and petrogenetic grids show an isobaric P–T path to peak temperatures of ~650 °C, supported by the presence of sillimanite‐K‐feldspar gneiss and migmatites. LP‐HT metamorphism in the Aston dome is related to early Carboniferous (c. 339 Ma) granitic intrusions into the dome core. As metamorphism is directly linked with the formation of the main S₂ schistosity, the temporal relations demonstrated in this study conflict with previous studies which constrained LP‐HT metamorphism and the development of flat‐lying schistosity to the late Carboniferous (315–305 Ma) – at least in the eastern Axial Zone.     

Deep crustal source of gneiss dome revealed by eclogite in migmatite (Montagne Noire,French Massif Central)

In orogens worldwide and throughout geologic time, large volumes of deep continental crust have been exhumed in domal structures. Extension-driven ascent of bodies of deep, hot crust is a very efficient mechanism for rapid heat and mass transfer from deep to shallow crustal levels and is therefore an important mechanism in the evolution of continents. The dominant rock type in exhumed domes is quartzofeldspathic gneiss (typically migmatitic) that does not record its former high-pressure (HP) conditions in its equilibrium mineral assemblage; rather, it records the conditions of emplacement and cooling in the mid/shallow crust. Mafic rocks included in gneiss may, however, contain a fragmentary record of a HP history, and are evidence that their host rocks were also deeply sourced. An excellent example of exhumed deep crust that retains a partial HP record is in the Montagne Noire dome, French Massif Central, which contains well-preserved eclogite (garnet+omphacite+rutile+quartz) in migmatite in two locations: one in the dome core and the other at the dome margin. Both eclogites record P ~ 1.5 ± 0.2 GPa at T  ~  700 ± 20°C, but differ from each other in whole-rock and mineral composition, deformation features (shape and crystallographic preferred orientation, CPO), extent of record of prograde metamorphism in garnet and zircon, and degree of preservation of inherited zircon. Rim ages of zircon in both eclogites overlap with the oldest crystallization ages of host gneiss at c. 310 Ma, interpreted based on zircon rare earth element abundance in eclogite zircon as the age of HP metamorphism. Dome-margin eclogite zircon retains a widespread record of protolith age (c. 470–450 Ma, the same as host gneiss protolith age), whereas dome-core eclogite zircon has more scarce preservation of inherited zircon. Possible explanations for differences in the two eclogites relate to differences in the protolith mafic magma composition and history and/or the duration of metamorphic heating and extent of interaction with aqueous fluid, affecting zircon crystallization. Differences in HP deformation fabrics may relate to the position of the eclogite facies rocks relative to zones of transpression and transtension at an early stage of dome development. Regardless of differences, both eclogites experienced HP metamorphism and deformation in the deep crust at c. 310 Ma and were exhumed by lithospheric extension—with their host migmatite—near the end of the Variscan orogeny. The deep crust in this region was rapidly exhumed from ~50 to <10 km, where it equilibrated under low-P/high-T conditions, leaving a sparse but compelling record of the deep origin of most of the crust now exposed in the dome.     

Discovery of diamond in the Tromsø Nappe,Scandinavian Caledonides (N. Norway)

We report the first finding of diamond in crustal rocks from the Tromsø Nappe of the North Norwegian Caledonides. Diamond occurs in situ as inclusions in garnet from gneiss at Tønsvika near Tromsø. The rock is composed essentially of garnet, biotite, white mica, quartz and plagioclase, minor constituents include kyanite, zoisite, rutile, tourmaline, amphibole, zircon, apatite and carbonates (magnesite, dolomite, calcite). The microdiamond, identified by micro‐Raman spectroscopy, is cuboidal to octahedral in shape and ranges from 5 to 50 μm in diameter. The diamond occurs as single grains and as composite diamond + carbonate inclusions. Diamond vibration bands show a downshift from 1 332 to 1 325 cm^?1, the majority of Raman peaks are centred between 1 332 and 1 330 cm^?1 and all peaks exhibit a full width at half maximum between 3 and 5 cm^?1. Several spectra show Raman bands typical for disordered and ordered graphite (sp²‐bonded carbon) indicating partial transformation of diamond to graphite. The calculated peak P–T conditions for the diamond‐bearing sample are 3.5 ± 0.5 GPa and 770 ± 50 °C. Metamorphic diamond found in situ in crustal rocks of the Tromsø Nappe thus provides unequivocal evidence for ultrahigh pressure metamorphism in this allochthonous unit of the Scandinavian Caledonides. Deep continental subduction, most probably in the Late Ordovician and shortly before or during the initial collision between Baltica and Laurentia, was required to stabilize the diamond at UHP conditions.     

Timing of metamorphism,melting and exhumation of the Leo Pargil dome,northwest India

The Leo Pargil dome, northwest India, is a 30 km‐wide, northeast‐trending structure that is cored by gneiss and mantled by amphibolite facies metamorphic rocks that are intruded by a leucogranite injection complex. Oppositely dipping, normal‐sense shear zones that accommodated orogen‐parallel extension within a convergent orogen bound the dome. The broadly distributed Leo Pargil shear zone defines the southwest flank of the dome and separates the dome from the metasedimentary and sedimentary rocks in the hanging wall to the west and south. Thermobarometry and in‐situ U–Th–Pb monazite geochronology were conducted on metamorphic rocks from within the dome and in the hanging wall. These data were combined with U–Th–Pb monazite geochronology of leucogranites from the injection complex to evaluate the relationship between metamorphism, crustal melting, and the onset of exhumation. Rocks within the dome and in the hanging wall contain garnet, kyanite, and staurolite porphyroblasts that record prograde Barrovian metamorphism during crustal thickening that reached ～530–630 °C and ～7–8 kbar, ending by c. 30 Ma. Cordierite and sillimanite overgrowths on Barrovian assemblages within the dome record dominantly top‐down‐to‐the‐west shearing during near‐isothermal decompression of the footwall rocks to ～4 kbar by 23 Ma during an exhumation rate of 1.3 mm year^?1. Monazite growth accompanied Barrovian metamorphism and decompression. The leucogranite injection complex within the dome initiated at 23 Ma and continued to 18 Ma. These data show that orogen‐parallel extension in this part of the Himalaya occurred earlier than previously documented (>16 Ma). Contemporaneous onset of near‐isothermal decompression, top‐down‐to‐the‐west shearing, and injection of the decompression‐driven leucogranite complex suggests that early crustal melting may have created a weakened crust that was proceeded by localization of strain and shear zone development. Exhumation along the shear zone accommodated decompression by 23 Ma in a kinematic setting that favoured orogen‐parallel extension.     

http://www.sciencedirect.com/science/article/pii/S1674987114000309

In the early 1980s, evidence that crustal rocks had reached temperatures 〉1000 ℃ at normal lower crustal pressures while others had followed low thermal gradients to record pressures characteristic of mantle conditions began to appear in the literature, and the importance of melting in the tectonic evolution of orogens and metamorphic-metasomatic reworking of the lithospheric mantle was realized. In parallel, new developments in instrumentation, the expansion of in situ analysis of geological ma- terials and increases in computing power opened up new fields of investigation. The robust quantifi- cation of pressure （P）, temperature （T） and time （t） that followed these advances has provided reliable data to benchmark geodynamic models and to investigate secular change in the thermal state of the lithosphere as registered by metamorphism through time. As a result, the last 30 years have seen sig- nificant progress in our understanding of lithospheric evolution, particularly as it relates to Precambrian geodynamics.