Carbon and Oxygen Isotope Compositions of Calcite and Rhodochrosite from Geothermal Exploratory Drills TH‐4 and TH‐6 near the Toyoha Deposit,Hokkaido, Japan

We studied calcite and rhodochrosite from exploratory drill cores (TH‐4 and TH‐6) near the Toyoha deposit, southwestern Hokkaido, Japan, from the aspect of stable isotope geochemistry, together with measuring the homogenization temperatures of fluid inclusions. The alteration observed in the drill cores is classified into four zones: ore mineralized zone, mixed‐layer minerals zone, kaolin minerals zone, and propylitic zone. Calcite is widespread in all the zones except for the kaolin minerals zone. The occurrence of rhodochrosite is restricted in the ore mineralized zone associated with Fe, Mn‐rich chlorite and sulfides, the mineral assemblage of which is basically equivalent to that in the Toyoha veins. The measured δ¹⁸O_SMOW and δ¹³C_PDB values of calcite scatter in the relatively narrow ranges from ?2 to 5‰ and from ?9 to ?5‰, respectively; those of rhodochrosite from 3 to 9‰ and from ?9 to ?5‰, excluding some data with large deviations. The variation of the isotopic compositions with temperature and depth could be explained by a mixing process between a heated surface meteoric water (100°C δ¹⁸O =?12‰, δ¹³C =?10‰) and a deep high temperature water (300°C, δ¹⁸O =?5‰, δ¹³C =?4‰). Boiling was less effective in isotopic fractionation than that of mixing. The plots of δ¹⁸O and δ¹³C indicate that the carbonates precipitated from H₂CO₃‐dominated fluids under the conditions of pH = 6–7 and T = 200–300°C. The sequential precipitation from calcite to rhodochrosite in a vein brought about the disequilibrium isotopic fractionation between the two minerals. The hydrothermal fluids circulated during the precipitation of carbonates in TH‐4 and TH‐6 are similar in origin to the ore‐forming fluids pertaining to the formation of veins in the Toyoha deposit.     

A 200–300 year cyclicity in sediment deposition in the Gotland Basin,Baltic Sea,as deduced from geochemical evidence

During the EU funded project BASYS (Baltic Sea System Study) short (Niemistö-type) and long (box and piston cores) sediment cores were taken which cover sedimentation during the past 8 ka. The uppermost part of the sedimentary sequence was chosen for a detailed geochemical study and freeze dried samples were analysed for about 20 elements but only the elements Mn and Ca are discussed. An age model was constructed using radiometric dating results by ²¹⁰Pb/¹³⁷Cs and ¹⁴C AMS. Significant correlation exists along the cores between very high Mn and moderately high Ca due to occrrences of the mineral rhodochrosite (kuthnahorite), a complex Mn(Ca) carbonate. This mineral is thought to be produced when salt water meets the pool of dissolved Mn at the bottom of the Gotland Basin. During favourable hydrographic conditions, e.g. strong northwesterly winds, salt water from the North Sea invades even the deepest parts of the central Baltic. Mn²⁺ which is produced mainly by the dissolution of ferromanganse oxides/oxyhydroxides in the water colum and in the course of destruction of organic matter in the sediments, combines with HCO₃^2- and Ca²⁺ in the seawater to form rhodochrosite. After burial, this mineral stays in the sediment and is seen as light-coloured layers. A certain cyclicity in the upper 1.5 m of the cores was observed in that about 200–300 a periods of elevated Mn–Ca are followed by periods with lower Mn–Ca of similar duration. An explanation for the observed cyclicity may be sea level variations: during rising sea level (transgression) more and more saline water is pushed into the deep basin of the Baltic Sea and if conditions are favourable (high dissolved Mn) the mineral rhodochrosite is precipitated.     

Isotopic signature of burial diagenesis and primary lithological contrasts in periplatform carbonates (Miocene, Great Bahama Bank)

The stable isotope geochemistry of Miocene sediments from the leeward margin of the Great Bahama Bank was examined to investigate burial diagenetic processes in periplatform carbonates. Data indicate that, in addition to differences in bulk proportions of neritic and pelagic carbonate along the slope, rhythmic variation in primary carbonate content has controlled patterns of burial diagenesis and associated geochemical signatures throughout much of the succession examined. The present study focuses on Ocean Drilling Program Sites 1006 and 1007, the most distal of five sites drilled from marginal to deep basin environments during Leg 166. These Miocene sections are characterized by their cyclic appearance, manifest as decimetre‐ to metre‐scale alternations between light‐coloured ooze/chalk/limestone and dark‐coloured marl/marlstone. The section at Site 1006 contains a high proportion of pelagic carbonate and is unlithified to a subbottom depth of ～675 m. Fluctuations in δ¹⁸O and δ¹³C values at this site are independent of lithological variation and reflect primary conditions. At Site 1007, located at the toe‐of‐slope and composed of a mixture of bank‐derived and pelagic carbonate, limestones are densely cemented, show little evidence of compaction and have δ¹⁸O values up to 2‰ higher than coeval sediments at Site 1006. Marlstones at Site 1007 are poorly cemented, exhibit an increase in compaction‐related features with depth and have lower and more variable δ¹⁸O values that are similar to those of coeval sediments at Site 1006. Isotopic and petrographic characteristics of limestone interbeds result from cement precipitation from cold sea water during the first ～100 m of burial. Higher proportions of insoluble materials and pelagic carbonate seem to have inhibited diagenetic alteration in adjacent marlstones; in spite of significant compaction and pressure solution during burial, original isotopic compositions appear to be best preserved in these intervals at Site 1007. The documented contrasts in petrographic and isotopic patterns illustrate the role of primary sediment composition in controlling lithification processes in periplatform carbonates and stress the importance of considering such factors when interpreting geochemical data from ancient shelf and slope limestones.     

Root‐related rhodochrosite and concretionary siderite formation in oxygen‐deficient conditions induced by a ground‐water table rise

Sedimentological, mineralogical, stable carbon and oxygen isotope determinations and biomarker analyses were performed on siderite concretions occurring in terrestrial silts to understand their formation and to characterize the sedimentary and diagenetic conditions favouring their growth. High δ¹³C values (6·4‰ on average) indicate that siderite precipitated in an anoxic environment where bacterial methanogenesis operated. The development of anoxic conditions during shallow burial was induced by a change in sedimentary environment from flood plain to swamp, related to a rise of the ground‐water table. Large amounts of decaying plant debris led to efficient oxygen consumption within the pore‐water in the peat. Oxygen depletion, in combination with a decrease in sedimentation rate, promoted anoxic diagenetic conditions under the swamp and favoured abundant siderite precipitation. This shows how a change in sedimentary conditions can have a profound impact on the early‐diagenetic environment and carbonate authigenesis. The concretions contain numerous rhizoliths; they are cemented with calcium‐rhodochrosite, a feature which has not been reported before. The rhodochrosite cement has negative δ¹³C values (?16·5‰ on average) and precipitated in suboxic conditions due to microbial degradation of roots coupled to manganese reduction. The exceptional preservation of the epidermis/exodermis and xylem vessels of former root tissues indicates that the rhodochrosite formed shortly after the death of a root in water‐logged sediments. Rhodochrosite precipitated during the initial stages of concretionary growth in suboxic microenvironments within roots, while siderite cementation occurred simultaneously around them in anoxic conditions. These suboxic microenvironments developed because oxygen was transported from the overlying oxygenated soil into sediments saturated with anoxic water via roots acting as permeable conduits. This model explains how separate generations of carbonate cements having different mineralogy and isotopic compositions, which would conventionally be regarded as cements precipitated sequentially in different diagenetic zones during gradual burial, can form simultaneously in shallow burial settings where strong redox gradients exist around vertically oriented permeable root structures.     

Spherical and columnar, septarian, 18O-depleted, calcite concretions from Middle–Upper Permian lacustrine siltstones in northern Mozambique: evidence for very early diagenesis and multiple fluids

Calcite septarian concretions from the Permian Beaufort Group in the Maniamba Graben (NW Mozambique) allow controls on the composition and nature of diagenetic fluids to be investigated. The concretions formed in lacustrine siltstones, where they occur in spherical (1 to 70 cm in diameter) and columnar (up to 50 cm long) forms within three closely spaced, discrete beds totalling 2·5 m in thickness. Cementation began at an early stage of diagenesis and entrapped non‐compacted burrows and calcified plant roots. The cylindrical concretions overgrew calcified vertical plant roots, which experienced shrinkage cracking after entrapment. Two generations of concretionary body cement and two generations of septarian crack infill are distinguished. The early generation in both cases is a low‐Mn, Mg‐rich calcite, whereas the later generation is a low‐Mg, Mn‐rich calcite. The change in chemistry is broadly consistent with a time (burial)‐related transition from oxic to sub‐oxic/anoxic conditions close to the sediment–water interface. Geochemical features of all types of cement were controlled by the sulphate‐poor environment and by the absence of bacterial sulphate reduction. All types of cement present have δ¹³C ranging between 0‰ and −15‰(Vienna Peedee Belemnite, V‐PDB), and highly variable and highly depleted δ¹⁸O (down to 14‰ Vienna Standard Mean Ocean Water, V‐SMOW). The late generation of cement is most depleted in both ¹³C and ¹⁸O. The geochemical and isotopic patterns are best explained by interaction between surface oxic waters, pore waters and underground, ¹⁸O‐depleted, reducing, ice‐meltwaters accumulated in the underlying coal‐bearing sediments during the Permian deglaciation. The invariant δ¹³C distribution across core‐to‐rim transects for each individual concretion is consistent with rapid lithification and involvement of a limited range of carbon sources derived via oxidation of buried plant material and from dissolved clastic carbonates. Syneresis of the cement during an advanced stage of lithification at early diagenesis is considered to be the cause of development of the septarian cracks. After cracking, the concretions retained a small volume of porosity, allowing infiltration of anoxic, Ba‐bearing fluids, resulting in the formation of barite. The results obtained contribute to a better understanding of diagenetic processes at the shallow burial depths occurring in rift‐bound, lacustrine depositional systems.     

Geochemical characteristics of sediment pore water from Site XS-01 in the Xisha trough of South China Sea and their significance for gas hydrate occurrence

Gas hydrate is a recently-found new source of energy that mostly exists in marine sediments. In recent years, we have conducted gas hydrate exploration in the South China Sea. The Xisha trough, one of the promising target areas for gas hydrate, is located in the northern margin of the South China Sea, adjacent to several large oil and gas fields. The Xisha trough extends 420 km long with the water depth of 1 500 m in the west part and 3 400 m in the east part and deposits thick sediments with organic matter content of 0.41%–1.02%. Previous studies on topographical features, geological P-T conditions, structural geology, sedimentary geology and geophysical bottom simulating reflectors (BSR) in the Xisha trough suggest that this area is favorable for the formation and accumulation of gas hydrate. In this paper, we present geochemical analyses for the sediment and pore water from a piston core at Site XS-01 in the Xisha trough. Seven pore water samples were analyzed for their anion (Cl⁻, SO₄ ²⁻, Br⁻, I⁻) contents, cation (Na, K, Ca, Mg) contents and trace element (Li, B, Sr, Ba, Rb, Mn) contents. Eight sediment samples were analyzed for stable carbon and oxygen isotopic compositions. A number of geochemical anomalies such as anions (e.g. Cl⁻, SO₄ ²⁻), cations (e.g. Ca, Mg) and trace elements (e.g. Sr, Ba, B) were found in this study. For example, the concentrations of Cl⁻ and SO₄ ²⁻ in pore water show a decreasing trend with depth. The estimated sulfate/methane interface (SMI) is only 18 m, which is quite similar to the SMI value of 23 m in the ODP164 Leg 997 at Blake Ridge. The Ca, Mg and Sr concentrations of pore water also decrease with depth, but concentrations of Ba, and Mg/Ca and Sr/Ca ratios increase with depth. These geochemical anomalies are quite similar to those found in gas hydrate locations in the world such as the Blake Ridge and may be related to the formation and dissociation of gas hydrates. The salt exclusion effect during the gas hydrate formation will cause an increase in major ion concentrations in the pore waters that diffused upward such as Cl. The anaerobic methane oxidation (AMO) may lead to the change of SO₄ ²⁻ and other cations such as Ca, Mg, Sr and Ba in pore water. Low δ ¹³C value of authigenic carbonates is a good indicator for gas hydrate occurrence. However, the bulk sediment samples we analyzed all show normal δ ¹³C values similar to biogenic marine carbonates, and this may also suggest that no gas hydrate-related authigenic carbonates exist or their amount is so small that they are not detectable by using this bulk analytical method. In conclusion, we suggest that the Site XS-01 in the Xisha trough of the northern margin of the South China Sea is a potential target for further gas hydrate exploration. Translated from Quaternary Sciences, 2006, 26(3): 442–448 [译自: 第四纪研究]     

Genesis of carbonates from the Parnok ferromanganese deposit,Polar Urals

The Parnok deposit is made up of stratiform lodes of iron (magnetite) and manganese (oxide-carbonate, carbonate, and carbonate-silicate) ores localized among terrigenous-carbonate sediments (black shales) on the western slope of the Polar Urals. The lithological study showed that ore-bearing sediments were accumulated in a calm hydrodynamic setting within a relatively closed seafloor area (trap depressions). Periodic development of anaerobic conditions in the near-bottom seawater was favorable for the accumulation of dispersed organic matter in the terrigenous-carbonate sediments. Carbon required to form calcium carbonates in the ore-bearing sediments was derived from carbon dioxide dissolved in seawater. In the organic-rich sediments, carbonates were formed with the participation of carbon dioxide released by the destruction of organic matter. However, δ¹³C values (from 0.5 to ?4.4‰ PDB) suggest a relatively low fraction of the isotopically light biogenic carbon in the host calcite. The most probable sources of Fe and Mn were hydrothermal seepages at the seafloor. The Eh-pH conditions during stagnation were favorable for the precipitation of Fe and accumulation of Mn in a dissolved state. Transition from the stagnation regime to the concentration of oxygen in near-bottom waters was accompanied by oxidation of the dissolved Mn and its precipitation. Thus, fluctuations in Eh-pH parameters of water led to the differentiation of Fe and Mn. Initially, these elements were likely precipitated as oxides and hydroxides. During the subsequent lithification, Fe and Mn were reduced to form magnetite and rhodochrosite. The texture and structure of rhodochrosite aggregates indicate that manganese carbonates already began to form at the diagenetic stage and were recrystallized during the subsequent lithogenetic stages. Isotope data (δ¹³C from ?8.9 to ?17.1‰ PDB) definitely indicate that the oxidized organic matter of sediment served as the main source of carbon dioxide required to form manganese carbonates. Carbonates from host rocks and manganese ores have principally different carbon isotopic compositions. Unlike carbonates of host rocks, manganese carbonates were formed with an active participation of biogeochemical processes. Further processes of metagenesis (T ≈ 250–300°C, P ≈ 2 kbar) resulted in the transformation of textures, structures, and mineral composition of all rocks of the deposit. In particular, increase in temperature and pressure provided the formation of numerous silicates in manganese ores.     

Origin of manganese carbonates in Jurassic red shale, central Japan

Manganese carbonate deposits in Japanese Jurassic sedimentary rocks were studied petrogeochemically. The deposits are characteristically composed of spheroidal micronodules, up to 1 mm in diameter, and always contain well-preserved radiolarian shells. Chemical elemental composition and mineralogical characteristics indicate that the micronodules contain rhodochrosite in a mixed carbonate phase composition (Mn_86.7?92.2Ca_2.2?2.9Mg_2.6?6.7Fe_2.6?5.6)CO₃ Carbon and oxygen isotope values, which range from ?7.99 to ?4.78‰ and ?4.05 to 0.28‰ relative to PDB, respectively, suggest that the manganese carbonate was precipitated in a suboxic zone. The micronodules closely resemble agglutinated benthic foraminifera in shape. We suggest that agglutinated foraminiferal tests composed of radiolarian shells accumulated selectively on the sediment surface during redeposition of bottom sediments and were replaced by manganese carbonate in suboxic diagenetic conditions of manganese reduction.     

Ferromanganese carbonate metasediments of the Sob area,Polar Urals: Bedding conditions,composition, and genesis

The paper presents the results of study of ferromanganese carbonate rocks in the Sob area (Polar Urals), which is located between the Rai-Iz massif and the Seida–Labytnangi Railway branch. These rocks represent low-metamorphosed sedimentary rocks confined to the Devonian carbonaceous siliceous and clayey–siliceous shales. In terms of ratio of the major minerals, ferromanganese rocks can be divided into three varieties composed of the following minerals: (1) siderite, rhodochrosite, chamosite, quartz, ± kutnahorite, ± calcite, ± magnetite, ± pyrite, ± clinochlore, ± stilpnomelane; (2) spessartite, rhodochrosite, and quartz, ± hematite, ± chamosite; (3) rhodochrosite, spessartite, pyroxmanite, quartz ± tephroite, ± fridelite, ± clinochlore, ± pyrophanite, ± pyrite. In all varieties, the major concentrators of Mn and Fe are carbonates (rhodochrosite, siderite, kutnahorite, Mn-calcite) and chlorite group minerals (clinochlore, chamosite). The chemical composition of rocks is dominated by Si, Fe, Mn, carbon dioxide, and water (L.O.I.): total SiO₂ + Fe₂O ₃ ^tot + MnO + L.O.I. = 85.6?98.4 wt %. The content of Fe and Mn varies from 9.3 to 55.6 wt % (Fe₂O ₃ ^tot + MnO). The Mn/Fe ratio varies from 0.2 to 55.3. In terms of the aluminum module Al_M = Al/(Al + Mn + Fe), the major portion of studied samples corresponds to metalliferous sediments. The δ¹³C_carb range (–30.4 to–11.9‰ PDB) corresponds to authigenic carbonates formed with carbon dioxide released during the microbial oxidation of organic matter in sediments at the dia- and/or catagenetic stage. Ferromanganese sediments were likely deposited in relatively closed seafloor zones (basin-traps) characterized by periodic stagnation. Fe and Mn could be delivered from various sources: input by diverse hydrothermal solutions, silt waters in the course of diagenesis, river discharges, and others. The diagenetic delivery of metals seems to be most plausible. Mn was concentrated during the stagnation of bottom water in basin-traps. Interruption of stagnation promoted the precipitation of Mn. The presence of organic matter fostered a reductive pattern of postsedimentary transformations of metalliferous sediments. Fe and Mn were accumulated initially in the oxide form. During the diagenesis, manganese and iron oxides reacted with organic matter to make up carbonates. Relative to manganese carbonates, iron carbonates were formed under more reductive settings and higher concentrations of carbon dioxide in the interstitial solution. Crystallization of manganese and iron silicates began already at early stages of lithogenesis and ended during the regional metamorphism of metalliferous sediments.     

Geochemical fingerprints of dolomitization in Bahamian carbonates: Evidence from sulphur,calcium, magnesium and clumped isotopes

In an effort to constrain the mechanism of dolomitization in Neogene dolomites in the Bahamas and improve understanding of the use of chemostratigraphic tracers in shallow‐water carbonate sediments the δ³⁴S, Δ₄₇, δ¹³C, δ¹⁸O, δ^44/40Ca and δ²⁶Mg values and Sr concentrations have been measured in dolomitized intervals from the Clino core, drilled on the margin of Great Bahama Bank and two other cores (Unda and San Salvador) in the Bahamas. The Unda and San Salvador cores have massively dolomitized intervals that have carbonate associated sulphate δ³⁴S values similar to those found in contemporaneous seawater and δ^44/40Ca, δ²⁶Mg values, Sr contents and Δ₄₇ temperatures (25 to 30°C) indicating relatively shallow dolomitization in a fluid‐buffered system. In contrast, dolomitized intervals in the Clino core have elevated values of carbonate associated sulphate δ³⁴S values indicating dolomitization in a more sediment‐buffered diagenetic system where bacterial sulphate reduction enriches the residual in ³⁴S, consistent with high sediment Sr concentrations and low δ^44/40Ca and high δ²⁶Mg values. Only dolomites associated with hardgrounds in the Clino core have carbonate associated δ³⁴S values similar to seawater, indicating continuous flushing of the upper layers of the sediment by seawater during sedimentary hiatuses. This interpretation is supported by changes to more positive δ^44/40Ca values at hardground surfaces. All dolomites, whether they formed in an open fluid‐buffered or closed sediment‐buffered diagenetic system have similar δ²⁶Mg values suggesting that the HMC transformed to dolomite. The clumped isotope derived temperatures in the dolomitized intervals in Clino yield temperatures that are higher than normal, possibly indicating a kinetic isotope effect on dolomite Δ₄₇ values associated with carbonate formation through bacterial sulphate reduction. The findings of this study highlight the utility of applying multiple geochemical proxies to disentangle the diagenetic history of shallow‐water carbonate sediments and caution against simple interpretations of stratigraphic variability in these geochemical proxies as indicating changes in the global geochemical cycling of these elements in seawater.     

Pleistocene geochemical stratigraphy of the borehole 1317E (IODP Expedition 307) in Porcupine Seabight,SW of Ireland: applications to palaeoceanography and palaeoclimate of the coral mound development

Stable isotopes and element compositions of the fine‐grained matrix were measured for IODP Expedition 307 Hole U1317E drilled from the summit of Challenger Mound in Porcupine Seabight, northeast Atlantic, to explore the palaeoceanographic and palaeoclimatic background to development of the deep‐water coral mound. The 155 m long mound section was divided into two units by an unconformity at 23.6 mbsf: Unit M1 (2.6–1.7 Ma) and Unit M2 (1.0–0.5 Ma). Results from 519 specimens show a difference in δ¹³C value between Unit M1 (?0.6‰ to ?5.0‰) and Unit M2 (?1.0‰ to 1.0‰), but such a distinct difference was not seen in δ¹⁸O values (1.0‰–2.5‰), CaCO₃ content (40–60 wt%), Sr/Ca ratio (2.0–8.0 mmol mol^?1), and Mg/Ca ratio (10.0–20.0 mmol mol^?1) through the mound. Positive δ¹⁸O and negative δ¹³C shifts at the mound base are consistent with the oceanographic changes in the northeast Atlantic at the beginning of the Quaternary. The positive δ¹³C regression in Unit M2 suggests a linkage to the mid Pleistocene intensified glaciation in the Northern Hemisphere. Warm Mediterranean Upper Core Water of Mediterranean Outflow Water, Eastern North Atlantic Water and cold Labrador Sea Water of North Atlantic Deep Water are key oceanographic features that cause spikes and shifts in stable isotope and element composition. However, the stable isotope values of the sediment matrix could not primarily record the glacial–interglacial eustatic/temperature change, but indirectly indicate current regimes of the intermediate oceanic layer where the coral mound grew. Similarly, elemental ratios and CaCO₃ content may not represent the productivity and temperature of surface sea water, respectively, but superpose the fractions from both surface and bottom water. It is concluded that palaeoceanographic change coupled to the Pleistocene glacial/interglacial cycles is a key control on the geochemical stratigraphy of the matrix sediments of the carbonate mound developed in Porcupine Seabight. Copyright © 2011 John Wiley & Sons, Ltd.     

Formation of modern dolomite in hypersaline pans of the Western Cape,South Africa

Authigenic calcite and dolomite and biogenic aragonite occur in Holocene pan sediments in a Mediterranean‐type climate on the western coastal plain of South Africa. Sediment was analysed from a Late Pleistocene coastal pan at Yzerfontein and four Holocene inland pans ranging from brackish to hypersaline. The pans are between 0·08 and 0·14 km² in size. The δ¹⁸O_PDB values of carbonate minerals in the pan sediments range from ?2·41 to 5·56‰ and indicate precipitation from evaporative waters. Covariance of total organic content and percentage carbonate minerals, and the δ¹³C_PDB values of pan carbonate minerals (?8·85 to ?1·54‰) suggest that organic matter degradation is a significant source of carbonate ions. The precipitation of the carbonate minerals, especially dolomite, appears to be mediated by sulphate‐reducing bacteria in the black sulphidic mud zone found in the brine‐type hypersaline pans. The knobbly, sub‐spherical texture of the carbonate minerals suggests that the precipitation of the carbonate minerals, particularly dolomite, is related to microbial processes. The ⁸⁷Sr/⁸⁶Sr ratios of pan carbonate minerals (0·7108 to 0·7116) are slightly higher than modern sea water and indicate a predominantly sea water (marine aerosol) source for calcium (Ca²⁺) ions with relatively minor amounts of Ca²⁺ derived from the chemical weathering of bedrock.     

Application of stable carbon isotopes for reconstructing salt‐marsh floral zones and relative sea level,New Jersey,USA

We investigated use of δ¹³C in bulk organic sediment to define the botanical origin of samples preserved in coastal sediment as a means to reconstruct relative sea level in New Jersey, USA. Modern transects at three sites demonstrated that low and high salt‐marsh floral zones dominated by C₄ species (Spartina alterniflora and Spartina patens) were associated with sediment δ¹³C values between ?18.9‰ and ?15.8‰ and occurred from mean tide level (MTL) to mean higher high water (MHHW). Brackish transitional settings vegetated by Phragmites australis with Iva fructescens and Typha sp. (C₃ species) and freshwater upland samples (C₃ species) were characterized by bulk sediment δ¹³C values of ?27.0‰ to ?22.0‰ and existed above MHHW. Parallel transects at one site suggested that intra‐site variability was not discernible. The utility of δ¹³C values for reconstructing relative sea level in New Jersey is limited by an inability to differentiate between brackish sediments related to sea level and freshwater upland samples. To facilitate this distinction in a 4.4 m core, we used a multi‐proxy approach (δ¹³C values with presence or absence of agglutinated foraminifera) to recognize indicative meanings for four sample types. Sediment with δ¹³C values greater than ?18.9‰ was derived from a vegetated salt‐marsh and formed between MTL and MHHW. Sediment with δ¹³C values less than ?22.0‰ and containing agglutinated foraminifera formed in a brackish transitional zone between MHHW and highest astronomical tide (HAT). This is the narrowest elevational range of the four sample types and most precise sea‐level indicator. Sediment with δ¹³C values less than ?22.0‰ and lacking foraminifera can only constrain the upper bound of former sea level. Samples with intermediate values (?22.0‰ to ?18.9‰) formed between MTL and HAT. Using these indicative meanings and radiocarbon dates, we suggest that a transition from brackish to salt‐marsh δ¹³C values recorded in the core took approximately 350 years (from 1800 to 1450 cal. a BP). Copyright © 2011 John Wiley & Sons, Ltd.     

南海北部陆坡西沙海槽XS-01站位沉积物孔隙水的 地球化学特征及其对天然气水合物的指示意义*

天然气水合物是近年来国际上发现的一种新型能源,大量赋存在海底沉积物中。西沙海槽位于南海北部陆坡区,周边有多个大型深水油气田区。对该区地形地貌、地质构造和沉积条件分析以及地球物理BSR分布表明,西沙海槽是我国海洋天然气水合物资源勘查的一个有利远景区。文章主要研究了位于西沙海槽最大BSR区内的XS-01站位沉积物孔隙水的地球化学特征,发现该站位孔隙水阴阳离子浓度和微量元素组成特征变化显示出可能与天然气水合物有关的明显地球化学异常,与国际上己发现有天然气水合物地区的异常相类似。因此,认为该站位是西沙海槽区最有利的天然气水合物赋存区,值得进一步的勘查工作。     

S, C, O, H Isotope Data and Noble Gas Studies of the Maoniuping LREE Deposit, Sichuan Province, China： A Mantle Connection for Mineralization

The Maoniuping REE deposit, located about 22 km to the southwest of Mianning, Sichuan Province, is the second largest light REE deposit in China, subsequent to the Bayan Obo Fe-Nb-REE deposit in the Inner Mongolia Autonomous Region. Tectonically, it is located in the transitional zone between the Panxi rift and the Longmenshan-Jinpingshan orogenic zone. It is a carbonatite vein-type deposit hosted in alkaline complex rocks. The bastnaesite-barite, bastnaesite-calcite, and bastnaesite-microcline lodes are the main three types of REE ore lodes. Among these, the first lode is distributed most extensively and its REE mineralization is the strongest. Theδ34Sv-CDT values of the barites in the ore of the deposit vary in a narrow range of +5.0 to +5.1‰in the bastnaesite-calcite lode and +3.3 to +5.9‰in the bastnaesite-barite lode, showing the isotopic characteristics of magma-derived sulfur. Theδ13Cv-PDB values and theδ518OV-SMOW values in the bastnaesite-calcite lode range from -3.9 to -6.9‰and from +7.3 to +9.7‰, respectively, which fall into the range of "primary carbonatites", showing that carbon and oxygen in the ores of the Maoniuping deposit were derived mainly from a deep source. Theδ13Cv-PDB values of fluid inclusions vary from -3.0 to -5.6‰, with -3.0 to -4.0‰in the bastnaesite-calcite lode and -3.0 to -5.6‰in the bastnaesite-barite lode, which show characteristics of mantle-derived carbon. TheδDv-SMOW values of fluid inclusions range from -57 to -88‰, with -63 to -86‰in the bastnaesite-calcite lode and -57 to -88‰in the bastnaesite-barite lode, which show characteristics of mantle-derived hydrogen. Theδ18OH2OV-SMOW values vary from +7.4 to +8.6‰in the bastnaesite calcite lode, and +6.7 to +7.8‰in the bastnaesite-barite lode, almost overlapping the range of +5.5 to +9.5‰for magmatic water. The 4He content, R/Ra ratios are (13.95 to 119.58×10-6 (cm3/g)STP and 0.02 to 0.11, respectively, and 40Ar/36Ar is 313±1 to 437±2. Considering the 4He increase caused by high contents of radioactive elements, a mantle-derived fluid probably exists in the inclusions in the fluorite, calcite and bastnaesite samples. The Maoniuping deposit and its associated carbonatite-alkaline complex were formed in 40.3 to 12.2 Ma according to K-Ar and U-Pb data. All these data suggest that large quantities of mantle fluids were involved in the metallogenic process of the Maoniuping REE deposit through a fault system.     

Paragenesis of Cretaceous to Eocene carbonate reservoirs in the Ionian fold and thrust belt (Albania): relation between tectonism and fluid flow

ABSTRACT This paper examines the diagenetic history of dual (i.e. matrix and fracture) porosity reservoir lithologies in Cretaceous to Eocene carbonate turbidites of the Ionian fold and thrust belt, close to the oil‐producing centre of Fier–Ballsh (central Albania). The first major diagenetic event controlling reservoir quality was early cementation by isopachous and syntaxial low‐Mg calcite. These cements formed primarily around crinoid and rudist fragments, which acted as nucleation sites. In sediments in which these bioclasts are the major rock constituent, this cement can make up 30% of the rock volume, resulting in low effective porosity. In strata in which these bioclasts are mixed with reworkedmicrite, isopachous/syntaxial cements stabilized the framework, and matrixporosity is around 15%. The volumetric importance of these cements, their optical and luminescence character (distribution and dull orange luminescence) and stable isotopic signal (δ¹⁸O and δ¹³C averaging respectively; ?0·5‰ VPDB and +2‰ VPDB) all support a marine phreatic origin. Within these turbidites and debris flows, several generations of fractures alternated with episodes of cementation. A detailed reconstruction of this history was based on cross‐cutting relationships of fractures and compactional and layer‐parallel shortening (LPS) stylolites. The prefolding calcite veins possess orange cathodoluminescence similar to that of the host rock. Their stable isotope signatures (δ¹⁸O of ?3·86 to ?0·85‰ VPDB and δ¹³C of – 0·14 to + 2·98‰ VPDB) support a closed diagenetic rock‐buffered system. A similar closed system accounts for the selectively reopened and subsequently calcite‐cemented LPS stylolites (δ¹⁸O of ?1·81 to ?1·14‰ VPDB and δ¹³C of +1·52 to +2·56‰ VPDB). Within the prefolding veins, brecciated host rock fragments and complex textures such as crack and seal features resulted from hydraulic fracturing. They reflect expulsion of overpressured fluids within the footwall of the frontal thrusts. After folding and thrust sheet emplacement, some calcite veins are still rock buffered (δ¹⁸O of ?0·96 to +0·2‰ VPDB and δ¹³C of +0·79 to +1·37‰ VPDB), whereas others reflect external (i.e. extraformational) and thus large‐scale fluid fluxes. Some of these veins are linked to basement‐derived fluid circulation or originated from fluid flow along evaporitic décollement horizons (δ¹⁸O around +3·0‰ VPDB and δ¹³C around +1·5‰ VPDB). Others are related to the maturation of hydrocarbons in the system (δ¹⁸O around ?7·1‰ VPDB and δ¹³C around +9·3‰ VPDB). An open joint system reflecting an extensional stress regime developed during or after the final folding stage. This joint system enhanced vertical connectivity. This open joint network can be explained by the high palaeotopographical position and the folding of the reservoir analogue within the deformational front. The joint system is pre‐Burdigalian in age based upon a dated karstified discordance contact. Sediment‐filled karst cavity development is linked to meteoric water infiltration during emergence of some of the structures. Despite its sediment fill, the karst network is locally an important contributor to reservoir matrix porosity in otherwise tight lithologies. Development of secondary porosity along bed‐parallel and bed‐perpendicular (i.e. layer‐parallel shortening) stylolites is interpreted as a late‐stage diagenetic event associated with migration of acidic fluids during hydrocarbon maturation. Development of porosity along the LPS system enhanced the vertical reservoir connectivity.     

'Pseudobreccias' revealed as calcrete mottling and bioturbation in the Late Dinantian of the southern Lake District, UK

Two types of ‘pseudobreccia’, one with grey and the other with brown mottle fabrics, occur in shoaling‐upward cycles of the Urswick Limestone Formation of Asbian (Late Dinantian, Carboniferous) age in the southern Lake District, UK. The grey mottle pseudobreccia occurs in cycle‐base packstones and developed after backfilling and abandonment of Thalassinoides burrow systems. Burrow infills consist of a fine to coarse crystalline microspar that has dull brown to moderate orange colours under cathodoluminescence. Mottling formed when an early diagenetic ‘aerobic decay clock’ operating on buried organic material was stopped, and sediment entered the sulphate reduction zone. This probably occurred during progradation of grainstone shoal facies, after which there was initial exposure to meteoric water. Microspar calcites then formed rapidly as a result of aragonite stabilization. The precipitation of the main meteoric cements and aragonite bioclast dissolution post‐date this stabilisation event. The brown mottle pseudobreccia fabrics are intimately associated with rhizocretions and calcrete, which developed beneath palaeokarstic surfaces capping cycle‐top grainstones and post‐date all depositional fabrics, although they may also follow primary depositional heterogeneities such as burrows. They consist of coarse, inclusion‐rich, microspar calcites that are always very dull to non‐luminescent under cathodoluminescence, sometimes with some thin bright zones. These are interpreted as capillary rise and pedogenic calcrete precipitates. The δ¹⁸O values (?5‰ to ?8‰, PDB) and the δ¹³C values (+2‰ to ?3‰, PDB) of the ‘pseudobreccias’ are lower than the estimated δ¹⁸O values (?3‰ to ?1‰ PDB) and δ¹³C values of (+2‰ to +4‰ PDB) of normal marine calcite precipitated from Late Dinantian sea water, reflecting the influence of meteoric waters and the input of organic carbon.     

Secondary Ion Mass Spectrometry Bias on Isotope Ratios in Dolomite–Ankerite,Part II: δ13C Matrix Effects

This study is Part II of a series that documents the development of a suite of calibration reference materials for in situ SIMS analysis of stable isotope ratios in Ca‐Mg‐Fe carbonates. Part I explored the effects of Fe²⁺ substitution on SIMS δ¹⁸O bias measured from the dolomite–ankerite solid solution series [CaMg(CO₃)₂–CaFe(CO₃)₂], whereas this complementary work explores the compositional dependence of SIMS δ¹³C bias (calibrated range: Fe# = 0.004–0.789, where Fe# = molar Fe/(Mg+Fe)). Under routine operating conditions for carbonate δ¹³C analysis at WiscSIMS (CAMECA IMS 1280), the magnitude of instrumental bias increased exponentially by 2.5–5.5‰ (session‐specific) with increasing Fe‐content in the dolomite structure, but appeared insensitive to minor Mn substitution [< 2.6 mole % Mn/(Ca+Mg+Fe+Mn)]. The compositional dependence of bias (i.e., the matrix effect) was expressed using the Hill equation, yielding calibration residual values ≤ 0.3‰ relative to CRM NBS‐19 for eleven carbonate reference materials (6‐μm‐diameter spot size measurements). Based on the spot‐to‐spot repeatability of a drift monitor material that ‘bracketed’ each set of ten sample‐spot analyses, the analytical precision was ± 0.6–1.2‰ (2s, standard deviations). The analytical uncertainty for individual sample analyses was approximated by combining the precision and calibration residual values (propagated in quadrature), suggesting an uncertainty of ± 1.0–1.5‰ (2s).     

Aragonite stromatolitic buildups from Santorini (Aegean Sea,Greece): Geochemical and palaeontological constraints of the caldera palaeoenvironment prior to the Minoan eruption (ca 3600 yr bp)

The pyroclastic deposits of the Minoan eruption (ca 3600 yr bp ) in Santorini contain abundant xenoliths. Most of these deposits are calcareous blocks of laminated‐botryoidal, stromatolite‐like buildups that formed in the shallow waters of the flooded pre‐Minoan caldera; they consist of (i) light laminae, of fibrous aragonite arranged perpendicular to layering, and (ii) dark laminae, with calcified filaments of probable biological origin. These microstructures are absent in the light laminae, suggesting a predominant inorganic precipitation of aragonite on substrates probably colonized by microbes. Internal cavities contain loose skeletal grains (molluscs, ostracods, foraminifera and diatoms) that comprise taxa typical of shallow marine and/or lagoon environments. Most of these forms are typical of warm water environments, although no typical taxa from hydrothermal vents have been observed. Past gasohydrothermal venting is recorded by the occurrence of barite, pyrolusite and pyrite traces. The most striking features of the stable isotopic data set are: (i) an overall wide range in δ¹³C_PDB (0·16 to 12·97‰) with a narrower variation for δ¹⁸O_PDB (?0·23 to 4·33‰); and (ii) a relatively uniform isotopic composition for the fibrous aragonite (δ¹³C = 12·40 ± 0·43‰ and δ¹⁸O = 2·42 ± 0·77‰, n = 21). The δ¹³C and δ¹⁸O values from molluscs and ostracods display a covariant trend, which reflects a mixing between sea water and a fluid influenced by volcano‐hydrothermal activity. Accordingly, ⁸⁷Sr/⁸⁶Sr from the studied carbonates (0·708758 to 0·709011 in fibrous aragonite and 0·708920 to 0·708991 in molluscs) suggests that the aragonite buildups developed in sea water under the influence of a hydrothermal/volcanic source. Significant differences in trace elements have been detected between the fibrous aragonite and modern marine aragonite cements. The caldera water from which the fibrous aragonite crusts formed received an input from a volcano‐hydrothermal system, probably producing diffuse venting of volcanogenic CO₂ gas and of a fluid enriched in Ca, Mn and Ba, and depleted in Mg and probably in Sr.